Cnveyr Equipment Manufacturers Assciatin MINUTES OF THE CEMA ENGINEERING CONFERENCE GENERAL BULK SECTION Tuesday, June 21, 2016 8:00 AM - Amended Date 1. The meeting was called t rder at 8:00 AM by Edwin McDnald, Chair. 2. Rll Call Seventy (70) attendees (see attached list). 3. Apprval f Agenda The agenda was apprved. 4. Cmmittee agendas: Cmmittee Chairs gave a brief verview f the agenda tpics fr discussin in their respective break ut meetings. The time and lcatin f these meetings were identified. Screw Cnveyr Idler Pulley Bucket Elevatr Bulk Belt Cnveyr Accessries Bulk Belt Systems and Emerging Technlgies Cmmittee Agenda Cnveyr Cntrls (inadvertently left ff the agenda) 5. ARPM Reprt was given. See attachment t the minutes. 6. New Business: Nne 7. Next Meeting annunced, June 27, 2017, La Playa Htel, Naples, FL 8. Adjurned at 8:25 AM Respectfully submitted, Edwin McDnald, Vice Chair
June 3, 2016 ARPM Reprt t Cnveyr Equipment Manufacturers Assciatin (CEMA) Engineering Cnference LaPlaya Beach Htel, Naples, FL; June 19-22, 2016 ARPM Standards and Technical Bulletins ARPM IP-1 Cnveyr and Elevatr Handbk Revised in 2015 and 2016 t crrect errrs in charts, figures and data sheets. Revised Chapter 4, Textile Characteristics and Belt Ratings, t agree with CEMA. Adding an Impact Test fr textile belting t Chapter 6. This is an industry first! Separated textile and steel crd reinfrced belts int their wn chapters. Revised and expanded the chapter n splicing. Released 5th editin in June, 2016. Internatinal Organizatin fr Standardizatin (ISO TC41 SC3) Current cmmittee participants include Austria, Belgium, China, Japan, France, Germany, Netherlands, Russian Federatin, Suth Africa, Switzerland, USA and UK. Secretariat respnsibilities are shared by China and Japan. The last ISO TC41/SC3 meeting was held Nvember 2, 2015in Atlanta, Gergia, USA. The next ISO TC41 SC3 is prpsed fr September 19, 2017 in the UK. ISO TC41 SC3 Activity, July 2015 t June 2016 ISO Meeting Pints f Interest fr CEMA Members ISO/NP 20238 Cnveyr Belts Drum Frictin Testing. ISO is studying ptins fr changes t the drum frictin test t accmmdate thicker and / r stiffer belts which are nw in use and which are difficult r impssible t wrap arund the current drum diameter as specified within EN1554. The cmmittee is cnsidering reduced pulley wrap (120 frm 180 deg.) and larger diameter pulley (Suth Africa has a 450mm drum) 7321 Shadeland Statin Way, Suite 285 Indianaplis, IN 46256 Phne: (317) 863-4072 Fax: (317) 913-2445
Prpsed New Standard Cnveyr belts - Labratry scale running resistance - Test methd JISC, Japan has prpsed a new small scale test t measure indentatin rlling resistance by pulling a small instrumented trailer alng a 5 m x 150 mm belt sample. See figure belw. A cmmittee will be frmed t evaluate DIN, Australian (Newcastle) and Japanese (Dshisha University) methds with a view t develping a new ISO standard. Published Standards ISO 251:2012 Cnveyr belts with textile carcass -- Widths and lengths ISO 252:2007 Cnveyr belts Adhesin between cnstitutive elements Test Published in 2007 methds ISO 282:1992 Cnveyr belts - Sampling Published in 1992 ISO 283: 2015 Textile cnveyr belts Full thickness tensile strength, elngatin at break and elngatin at the reference lad Test methd Published in 2015 ISO 284:2012 Cnveyr belts -- Electrical cnductivity -- Specificatin and test methd ISO 340:2013 Cnveyr belts Labratry flammability characteristics Published in 2013 Requirements and test methds ISO 433:1991 Cnveyr belts - Marking Published in 1991 ISO 433:1991 / Cnveyr belts Marking Amendment 1 Published in 2006 Amd 1:2006 ISO 505:1999 Cnveyr belts Methd fr the determinatin f the tear prpagatin Published in 1999 resistance f textile cnveyr belts ISO 583:2007 Cnveyr belts with tensile carcass Ttal belt thickness and Published in 2007 thickness f cnstitutive elements Test methds ISO 703:2007 Cnveyr belts Traverse flexibility (trughability) Test methd Published in 2007 ISO 1120:2012 Cnveyr belts -- Determinatin f strength f mechanical fastenings - Static test methd ISO 3684:1990 Cnveyr belts Determinatin f minimum pulley diameters Published in 1990 7321 Shadeland Statin Way, Suite 285 Indianaplis, IN 46256 Phne: (317) 863-4072 Fax: (317) 913-2445
ISO 3684:1990 /Amd 1:2006 ISO 3870:1976 ISO 4195:2012 Cnveyr belts Determinatin f minimum pulley diameters Amendment 1 Cnveyr belts (fabric carcass) with length between pulley centers up t 300 m, fr lse bulk materials - Adjustment f take-up device Cnveyr belts with heat-resistant rubber cvers -- Heat resistance f cvers -- Requirements and test methds Published in 2006 Published in 1976 ISO 5284:1986 Cnveyr belts List f equivalent terms Published in 1986 ISO 5284:1986/ Cr Cnveyr belts List f equivalent terms Technical Crrigendum 1 Published in 2005 1:2005 ISO 5285:2012 Cnveyr belts -- Guidelines fr strage and handling ISO 5293:2004 Cnveyr belts Determinatin f minimum transitin distance f three idler rllers Published in 2004 ISO 5293:2004/Cr 1:2008 ISO 7590:2009 Cnveyr belts Determinatin f minimum transitin distance f three idler rllers Technical Crrigendum 1 Steel crd cnveyr belts Methds fr the determinatin f ttal thickness and cver thickness ISO 7622-1:2013 Steel crd cnveyr belts -- Lngitudinal tractin test -- Part 1: Measurement f elngatin ISO 7622-2:2015 Steel crd cnveyr belts -- Lngitudinal tractin test -- Part 2: Measurement f tensile strength ISO 7623:2015 Steel crd cnveyr belts Crd-t-cating bnd test Initial test and after thermal treatment ISO 8094:2013 Steel crd cnveyr belts -- Adhesin strength test f the cver t the cre layer ISO 9856:2003 Cnveyr belts -- Determinatin f elastic and permanent elngatin and calculatin f elastic mdulus ISO 9856:2003 /Amd 1:2012 (Ed 1) Cnveyr belts -- Determinatin f elastic and permanent elngatin and calculatin f elastic mdulus -- Amendment 1 Published in 2008 Cmmittee revisin in prgress. Cmmittee Internal Ballt Stage. Published in 2013 Published in 2015 Published in 2015 Published in 2013 Revisin in prgress. Final Draft Stage. ISO 10247:1990 Cnveyr belts -- Characteristics f cvers -- Classificatin Published in 1990 ISO 10247:1990 Cnveyr belts -- Characteristics f cvers Classificatin Published in 2006. /Amd 1:2006 Amendment 1 ISO 14890:2013 Cnveyr belts -- Specificatin fr rubber- r plastics-cvered cnveyr belts Published in 2013. f textile cnstructin fr general use ISO 15147:2012 Light cnveyr belts -- Tlerances n widths and lengths f cut light cnveyr belts ISO 15236-1:2005 Steel crd cnveyr belts Part 1: Design dimensins and mechanical Revisin in requirements fr cnveyr belts fr general use prgress. Final Draft Stage ISO 15236-2:2004 Steel crd cnveyr belts - Part 2: Preferred belt types Revisin in prgress. Enquiry Stage. ISO 15236-3:2007 Steel crd cnveyr belts Part3: Special safety requirements fr belts Published in 2007 fr use in undergrund installatins ISO 15236-4:2004 Steel crd cnveyr belts Part 4: Vulcanized belt jints Published in 2004 7321 Shadeland Statin Way, Suite 285 Indianaplis, IN 46256 Phne: (317) 863-4072 Fax: (317) 913-2445
ISO 16581:2012 Textile cnveyr belts Determinatin f the net length f an endless Published in 2012 (spliced) cnveyr belt ISO 18573:2012 Cnveyr belts -- Test atmspheres and cnditining perids Published in 2013. ISO 21178:2013 Light cnveyr belts -- Determinatin f electrical resistances Published in 2013. ISO 21179:2013 Light cnveyr belts -- Determinatin f the electrstatic field generated by a running light cnveyr belt Published in 2013. ISO 21180:2013 Light cnveyr belts -- Determinatin f the maximum tensile strength Published in 2013. ISO 21181:2013 Light cnveyr belts -- Determinatin f the relaxed elastic mdulus Published in 2013. ISO 21182:2013 Light cnveyr belts -- Determinatin f the cefficient f frictin Published in 2013. ISO 21183-1:2005 Light cnveyr belts Part 1: Principle characteristics and applicatins Published in 2005 ISO 21183-2:2005 Light cnveyr belts Part 2: List f equivalent terms Revisin in prgress. Cmmittee Draft Stage. ISO 22721:2007 Cnveyr belts Specificatin fr rubber-r plastic cvered cnveyr belts f textile cnstructin fr undergrund mining Published in 2007 Cmmittee Internal Ballt (CIB) and Cmmittee Draft (CD) Stage CIB 7590 Steel crd cnveyr belts Methds fr the determinatin f ttal thickness and cver thickness Cmmittee revisin in prgress. Cmmittee Internal Ballt Stage. CD 20238 Cnveyr Belts Drum Frictin Testing Develpment f a Cmmittee Draft in prgress. CIB 21183-2 Light cnveyr belts Part 2: List f equivalent terms CIB in prgress t revise ISO 21183-2 t include Japanese terms. Draft Internatinal Standard (DIS) - Enquiry Stage DIS 15236-2 Steel crd cnveyr belts - Part 2: Preferred belt Re-ballted at DIS stage. Vting types clsed 5-18-2016. Final Draft Internatinal Standard Apprval Stage FDIS 9856 Cnveyr belts -- Determinatin f elastic and Based n a unanimus vte at the last permanent elngatin and calculatin f elastic ISO TC41/SC3 meeting, a minr mdulus revisin (nrmative references) will be ballted. FDIS 15236-1 Steel crd cnveyr belts Part 1: Design dimensins and mechanical requirements fr cnveyr belts fr general use Vting clsed 6-10-16. Systematic Reviews 7321 Shadeland Statin Way, Suite 285 Indianaplis, IN 46256 Phne: (317) 863-4072 Fax: (317) 913-2445
ISO 252:2007 Cnveyr belts Adhesin between cnstitutive Reaffirmed, n changes. elements Test methds ISO 703:2007 Cnveyr belts Traverse flexibility (trughability) Minr revisin requested. Test methd ISO 15236-3:2007 Steel crd cnveyr belts Part3: Special safety Revisins requested. requirements fr belts fr use in undergrund installatins ISO 21183-1:2005 Light cnveyr belts Part 1: Principle characteristics and applicatins Reaffirmed, n changes. If yu have any fllw-up questins r wuld like further infrmatin please cntact Jerry Lukavich at the ARPM. Thank yu fr the pprtunity t present this reprt. Jerry Lukavich ARPM Technical Crdinatr jlukavich@arpminc.rg417-350-3920 7321 Shadeland Statin Way, Suite 285 Indianaplis, IN 46256 Phne: (317) 863-4072 Fax: (317) 913-2445