Bolted Bonnet Gate & Globe Crane Globe & Gate Valves are used on almost all refinery units and are available in different material options of cast steel. Gate, globe, check, globe stop-check valves are available in the high pressure designs. Brands: CRANE ASME Class: 150-1500 PN: 10-100 Sizes: 1½ - 48 DN: 40-1200 Materials: Carbon Steel, Stainless, Special Alloys & Materials Connections: Flanged, Welded, Threaded High Pressure / Temperature Valves Pacific Pressure Seal Valves provide the high pressure valve solutions for numerous oil refinery units including hydro-treating unit, hydro-cracking unit, gasification unit, cogeneration (boilers and steam systems), and hydrogen generation unit. Gate, globe, check, globe stop-check valves are available in the high pressure designs. Brand: Pacific ASME Class: 600-4500 Sizes: 2-36 DN: 50-900 Materials: Carbon Steel, Alloy Connections: Butt Weld, Flanged, Venturi Page 1 of 16
Extreme Temperature Valves Pacific WedgePlug Valves are the ultimate solution for extreme temperature application such as the isolation valves of the delayed coker unit and the hydro-cracking unit. More than 80 years successful experience addressing hot, dirty and severe refining applications, including delayed coking, fluidized catalytic cracking, Ethylene cracking and asphalt production. Brand: Pacific WedgePlug ASME Class: 150-1500 Sizes: ½ - 36 DN: 15-900 Materials: Carbon Steel, Stainless Steel, Alloy Steel, Special Alloys Connections: Butt Weld, Flanged, Threaded Body Styles: Special Configurations Available HF Alkylation Valves Valves Pacific HF Gate, Globe & Check Valves provide dependable, long lasting shut off, and 100% emission containment, with an inherently fire safe design. Pacific HF valves are approved by UOP Process Division and listed on COP Licensing. More than 60 years of refinery proven performance. Brand: Pacific HF Valves ASME Class: 150 600 Sizes: 1½ - 36 DN: 40-900 Materials: Carbon Steel or Monel Trim: Monel or Hastelloy C Connections: Flanged, Socket Weld, Threaded Page 2 of 16
HF Alkylation Valves Xomox HF Plug Valves provide dependable, long lasting shut off, and 100% emission containment, with an inherently fire safe design. Pacific HF valves are approved by UOP Process Division and listed on COP Licensing. More than 35 years of refinery proven performance. Brand: Pacific HF Valves ASME Class: 150 600 Sizes: ½ - 24 (Standard and Full Port) DN: 15-600 Materials: Monel Connections: Flanged, Socket Weld, Threaded High Pressure / Temperature Valves Krombach Metal Seated Ball Valves with flanged connection PN 10 - PN 40 or ASME Class 150 or Class 300, body in twopiece design, full bore, floating ball, high wear resisting metal seal system, anti blow-out stem, antistatic, cavity relief, fire safe acc. to BS 6755 part 2, TA-Luft tested, with mounting flange for actuator acc. to DIN ISO 5211, operation with hand lever, gear box or pneumatic actuator. Face-to-face dimension acc. to DIN EN 558-1 or ASME B 16.10, API 6 D and BS 2080. Sealing surface acc. to DIN 2526 Form C or ASME B 16,5 RF. Brand: Krombach Crane Company: Freidrich Krombach GmbH (Germany) Pressure Range: DIN PN 10 PN 40 (ASME Class 150 300) Sizes: DN 15 200 (1/2 8 ) Materials: Carbon Steel, Stainless Steel Page 3 of 16
Process Ball Valves Xomox Metal Ball Valves provide a variety of reliable ball valve solutions for numerous fertilizers units, including 1 piece, 2 piece and 3 piece designs. All Xomox metal ball valves are TA-Luft approved, antiblow out S2 stem design, and are equipped with ISO 5211 actuator assembly flanges. Brand: Xomox Valves Crane Company: Xomox International GmbH (Germany) Pressure Rating: DIN PN 10, 25, 40 (PN63 up to 2 for 3 piece body) Sizes: DN15 DN100 (½ 4 ) Materials: Carbon Steel 1.0619 and Stainless Steel 1.4408 n. EN10213-4 Connections: Butt Weld, Flanged, Venturi Sleeve Plug Valves Xomox Tufline Sleeve Plug Valves provide exceptional sealing to atmosphere with double stem sealing as a standard. The valve is cavity free, thus the media cannot collect, contaminate or build up excessive pressure. The sleeves provide all the lubrication the valves ever need. The valve design provide bi-directional sealing. Steam jacketed version available. 2-way & 3-way configuration available. Double block & bleed configuration available. Brand: Xomox Tufline Valves ASME Class: 150, 300 & 600 Sizes: ½ 16 Materials: Carbon Steel, Stainless Steel, Special Alloys Connections: Butt Weld, Flanged, Threaded Page 4 of 16
Lined Ball Valves Xomox Lined Ball (XLB) Valves offer an innovative stem sealing system provides safety and long term fugitive emission control under extreme conditions. Dynamic body joint design allows the valve to retain pressure boundary during thermal cycles. Lower torque translates into reduced actuation costs and space saving. The entire valve is sized to have little or no extension beyond the flange diameter. This allows the valve to be used in parallel piping systems easily, and importantly, without having to increase the dimensions of the system. It also has a smooth and painted surface allowing for effective wash down, limiting the potential for external corrosion. Brand: Xomox Valves Crane Company: Xomox International GmbH (Germany) Temperature range: 14 F up to 400 F (-10 C up to 204 C) Pressure Rating: Suitable for vacuum services Operating pressure max. 17 barg (250 psig) Sizes and flange dimensions: PN 10 DN 15 150 / PN 16 DN 15-150 CL 150 NPS ½ - 6 / JIS 10 k DN 15 300 Materials: Body: Ductile Iron EN-JS 1049/60-40-18, ASTM A395, PFA Teflon Lined Integrated Ball / Stem: 1.4470 / ASTM A995 gr 4A, PFA Teflon lined Connections: Flanged Page 5 of 16
Lined Plug Valves Xomox TUFLIN Lined Plug Valves are cavity-free. Due to the special body design, the liner is firmly locked. Plug coating is extended over the shaft sealing. Liners manufactured by TUFLIN are non-porous and 100% dielectrically spark tested. For safety reasons, liner wall thickness is oversized. Plastic liner materials are selected according to requirements. TUFLIN plug valves are used for applications where other materials have insufficient chemical resistance or are not economical. Brand: Xomox TUFLIN Valves Crane Company: Xomox International GmbH (Germany) Temp. Range: 233 K up to 433 K (-40 C up to 180 C) for FEP 233 K up to 473 K (-40 C up to 200 C) for PFA Pressure Class: Suitable for vacuum service: (1.33 mbar / hpa) Operating pressure max. 10 bar Available sizes and flange dimensions: PN 10 DN 15 300 / PN 16 DN 15 300 Class 150 NPS ½ - 12 / JIS 10 k DN 15 300 Materials: Body: EN-JS1049 (GGG 40.3, 0.7043) or A352-LCB (DN 32 only in 0.7043) Body lining: FEP or PFA Plug: Up to DN 32 NPS 1 ¼ plug core made form steel (1.0570). From DN 40 NPS 1 ½ plug core made from EN-JS1049 (GGG 40.3, 0.7043) or steel (1.0570/ 1.0727) FEP or PFA lining by choice Jacket: 1.0038 Page 6 of 16
Lined Check Valves Xomox Teflon Lined Check Valves provide all Teflon lined check valve solutions required for the process industry. Brand: Xomox Valves Crane Company: Xomox International GmbH (Germany) Pressure Rating: ASME Class 150 (DIN PN 10 16) Sizes: ½ 6 (DN 15 150) Materials: Body: Ductile Iron Body Lining: PFA, PVDF, ETFE Tightness Check: EN 12266-1 Leakage rate A Standards: DIN PN 10 16, ASME Class 150, JIS 10 K Lined Piping, Fittings & Hoses Resistoflex is the largest plastic-lined piping products supplier in the world, with manufacturing in North America, Europe, and worldwide sales locations. Resistoflex invented the PTFE lined hose technology in 1953 for the aerospace and chemical industries, and in 1956 introduced the world s first pipe and fittings lined with TEFLON PTFE. Resistoflex also offer a full line of polypropylene, Teflon PFA, and Kynar PVDF-lined pipe and fittings. Resistoflex corrosion-resistant plastic lined pipe, fittings, and TEFLON lined hoses are used in corrosive fluid services as an economical alternative to expensive alloys. Brand: Resistoflex Crane Company: Resistoflex (USA) & Resistoflex GmbH (Germany) Page 7 of 16
Double Block and Bleed Sleeved Plug Valves Xomox Double Block and Bleed Sleeved Plug Valves are available for specific services. Brand: Xomox Valves Crane Company: Xomox International GmbH (Germany) Pressure Rating: ASME Class 150 Other Classes On Request Materials: Carbon Steel, Stainless Steel, Special Alloys Non-Slam Check Valves Stockham Noz-Chek & Compaq-Noz Valves are engineered for the application and not the line size. Non-slam and quick dynamic response due to the short stroke thus minimizes reverse flow through the valve and prevent water hammer risks. Suitable for reciprocating compressor (removal of chatter effect frequently associated with conventional check valves). Stable behavior due to the venture type design, the opening characteristics ensure a fully opened check valve. The valve design allows for a choice of spring strength to suit critical velocity systems and improve valve response time. Brand: Noz-Chek & Compaq-Noz Valves ASME Class: 150 4500 Sizes: 2-84 DN: 50-2100 Materials: Iron, Steel, Stainless Steel Connections: Flanged, Hub-End, Weld-End Standards: ASME, DIN, JIS Page 8 of 16
Dual Plate Check Valves Stockham Duo-Chek Valves are lightweight and compact compared to traditional swing check valves. Independent springs and support sleeves provide fast response time and minimize water hammer risks for non-slam applications. The valve design allows for a choice of spring strength to suit critical velocity systems and improve valve response time (Can be engineered to application). Brand: Duo-Chek Valves ASME Class: 125 4500 Sizes: 2-84 DN: 50-2100 Materials: Steel, Stainless Steel, Exotic Metals Body Styles: Wafer, Lugged, Flanged Standards: ASME, DIN, JIS, AS Single Swing Check Valves Crane Swing Check Valves are used to prevent flow reversal in horizontal pipelines and can be furnished with outside lever and adjustable weight to assist disc in closing. Also available in tilting disc design to reduce the slam by reducing the disc travel distance. Brand: Crane & Pacific Valves ASME Class: 150 2500 Sizes: 2-24 Materials: Steel, Stainless Steel Page 9 of 16
Triple Offset Butterfly Valves Xomox 9000 Triple Offset Butterfly Valves are TA-Luft fugitive emissions approved. Fire safe approved to API 607 Edition 4. For harsh conditions of critical process applications, steam isolation, high cycle frequency, and temperature extremes, this triple-offset metal-seated valve provides unmatched performance and reliability. The bi-directional bubble-tight closure, even after extensive cycling, provides sealing integrity formerly associated only with soft-seated valves. Triple offset valves can be equipped with dual packing and a leak-off port for monitoring any fugitive emissions. Brand: Xomox Valves Crane Company: Xomox International GmbH (Germany) Temperature Range: 196 ºC to +550 ºC Pressure Range: DIN PN 10, 16, 25, 40 (ANSI Class 150 300) Sizes: DN 80 600 (3 24 ) Other sizes & higher pressure on request Materials: Carbon Steel, Stainless Steel, High Alloys Body Styles: Lugged, Double Flanged Design: ASME B16.34, ASME Sec III and SEC VIII, ASME B31.1 & B31.3, API 609 Steam Traced & Jacketed High Performance Butterfly Valves Xomox Tufline Steam Traced High Performance Butterfly Valves offer a full 3-point valve heating system, including the stem, body and disc. This is a must for processing sulfur or other agglomerating media (any material that must be kept above a particular temperature to avoid solidification). The valve design allows for a choice of spring strength to suit critical velocity systems and improve valve response time (Can be engineered to application). Brand: Xomox Tufline Valves ASME Class: 150, 300 & 600 Sizes: 6 48 Materials: Carbon Steel Body with Stainless Steel Disc, Optional Materials Available Upon Request Connections: Lug Page 10 of 16
Double Offset Butterfly Valves Xomox High Performance Butterfly Valves are soft seated to provide tight shut-off. The valves are equipped with integrated ISO flange enables direct actuation. Superior sealing and extended service life. Extended neck length allows thicker pipe and valve insulation. Closed bottom of valve body allows safe use with hazardous media. Brand: Xomox Valves Crane Company: Xomox International GmbH (Germany) Pressure Rating: DIN PN 10 16 Sizes: DN 80 300 Materials: Body: Carbon Steel, Stainless Steel, High Alloys Seat: PTFE, Reinforced PTFE, Fire Safe Body Styles: Lug, Wafer Triple Offset Butterfly Valves Flowseal & Krombach Triple Offset Butterfly Valves provide bi-directional gas tightness and have an innovative self-centering, flexible disc sealing, and uses pure graphite spring loaded shaft packing. The valves design flexibility provides customized solutions. Brand: Flowseal & Krombach Valves ASME Class: 150 600 Sizes: 3 96 DN: 80 2400 Materials: Carbon Steel, Stainless Steel, Special Materials Body Styles: Lugged, Double Flanged (Short or Long Patterns), Butt Weld Ends, Customized Ends Page 11 of 16
Double Offset Butterfly Valves Krombach Double Offset Butterfly Valves are soft seated to provide tight shut-off. The disc design allow for optimal flow profile. Hard rubber coating for heavy duty installations are available. Brand: Krombach Valves ASME Class: 150, 300 & 600 PN: 10 40 Sizes: 4 136 DN: 100 3400 Materials: Welded Body, Resilient Seated Body Styles: Double Flanged (Short or Long Patterns), Customized Ends. High Performance Butterfly Valves Flowseal HP Butterfly Valves provide the double offset design as a position closed, higher pressure (up to Class 600) and tight shut off solution to the Sugar Industry. They are available in wafer and lug bodies, soft and metal seated designs, and in the operator configuration (Manual and Actuated) required by the Sugar Industry. Brand: Flowseal Valves ASME Class: 150 600 Sizes: 2 48 DN: 50 1200 Materials: Carbon Steel, Stainless Steel, Aluminium Bronze Body Styles: Wafer, Lugged (Double Dead End) Page 12 of 16
Resilient Seated Butterfly Valves Centerline RS Butterfly Valves cover the requirements of refinery applications. The valves utilize replaceable Phenolic backed cartridge seat which makes the valves fully field repairable for the size range of 2 through 24. are available in the wafer, lug, and flanged bodies in the materials and operator configurations (Manual and Actuated) required by the Sugar Industry. Brand: Centerline Valves ASME Class: 150 CWP Sizes: 1½ 54 DN: 40 1350 Materials: Carbon Steel, Stainless Steel, Cast Iron, Ductile Iron Body Styles: Wafer, Lugged, Double Flanged Rack & Pinion Pneumatic Actuators Revo Pneumatic Actuators are the Sugar Industry solution for double and single acting performance with torque capability exceeding 100,000 in-lbs and position indicator per NAMUR standard. Revo actuator has an Aluminium body with anodized surfaces for superior corrosion protection inside and out. It has an actuator to valve interface per DIN ISO 5211, and a standard accessory interfaces per VDI/VDE 3845 (NAMUR). Brand: Revo Actuator Type: Double Acting, Spring Return Sizes: ¼ 48 DN: 8 1200 Torque Range: Ibf-in: 30 6,000,000; Nm:12 677,908 Page 13 of 16
Electric (Direct or Bracket) Actuators Crane Electric Actuators are compact and lightweight. Available for on/off or modulating duty. All circuitry encapsulated to protect against moisture, heat and vibration. Instantaneous motion stop circuit (modulating version eliminates hunting and overrun and guarantees 250 steps over entire 90 range) Self-locking final reduction worm gear holds last position if power is lost. Valve position indicator built into actuator. Maintenance-free design. Brand: Crane Actuator Sizes: ¼ 16 DN: 8 400 Torque Range: Ibf-in: 347 17,359; Nm:39 1,960 Diaphragm Valves Saunders Industrial Diaphragm Valves offer the most reliable and simplest valve designs for utilities, slurry and other services. The valves offer excellent application coverage with variety of diaphragm and body lining materials suitable different operator options (Manual & Actuated). Page 14 of 16
Strainers (Y-type, T-type & Basket Type) Krombach Strainers Cover lift and swivel devices. Differential pressure connections/indicators. Vent & drain connections/valves. Supporting legs. Special materials. Special painting/coating. Internal rubber lining. Gasket according to TA-Luft for Fugitive Emissions. Special sealing surface. Oil & grease-free (for O2). Heating or cooling jacket. Special mesh sizes. Brand: Krombach Strainers ASME Class: 150 1500 PN: 6 400 Sizes: ½ 40 + DN: 15 1000+ Screen: Stainless Steel Materials: Carbon Steel, Stainless Steel, Cast Iron, Ductile Iron, Special Materials Body Styles: Flanged, Welded, Threaded Vacuum Breakers (Vacuum Relief Valves) Krombach Vacuum Breakers are used in different process industry plants including power, oil & gas, petrochemical, fertilizers, chemical, sugar, water and other industrial plants. They can be used as vacuum breakers or vacuum limiting valves and are available in soft or metal seated designs. They can be used on gas and steam combination services and available in sea water resistant materials. The design provides vacuum relief and deaerator in one valve. Selfoperating, independent from external energy. Brand: Krombach PN: 10 40 DN: 20 500 Setting Range: 0.05 up to 0.97 bar Abolute Materials: Stainless Steel Body Styles: Flanged, Welded, Threaded Page 15 of 16
Specialty Products Sight Glasses Through our Krombach line, we provide a variety of sight glasses available up to PN 40 DIN dimensions only Vessel Bottom Valves Krombach also makes a vessel bottom ball valve for use in critical service applications Bottom Drain Valves Our Krombach line includes a very useful valve design for vessel bottom draining systems. Available up to PN 40 DIN dimensions only Engineered Strainer Assemblies Krombach also has the capability to design and build engineered strainers for specialty applications. These are designed and manufactured to meet customers needs Page 16 of 16