PRSRT STD PAID V8 and FORD 4 CYL

V8 and FORD 4 CYL discount catalog - 2009

V8 PISTONS - GREAT VALUE! PRO STAR FLAT TOP PISTONS 4 EYEBROW 350 ULTRALIGHTS (RA-PS4350M).....................................$539.00 As light as 385g. Up to 50 grams lighter than other brands. Machined for thinner metric rings. Includes light pins. Available for 5.7 & 6 rods, 4.030-4.060 bores. 350 METRIC RING SETS (RA-RS4035M)....................................$110.00 1.5 x 1.5 x 3mm plasma moly file-fit sets. U.S. made. 305 ULTRALIGHT SPRINT (WI-305M).......$84.87ea. Lightest available anywhere. Durable for alcohol classes. Minimal pockets for most solid cams. Uses thinner metric rings. Pins included..030 &.060 bores in stock. 305 METRIC RING SETS (RA-RS3770M)......$109.00 Plasma moly file-fit..060 bore features thinner 1.2mm top ring. PRO-PISTONS New full round skirt design Pressure seal groove improves ring function Singles and customs available P I S T O N S Stronger 2618 alloy forgings All Pro-Tru s include moly ring set Pins & locks included PRO-TRU FLAT TOP......................from 522.75 SBC 305, 350-434 2 valve reliefs SBC 305, 350 4 valve reliefs FORD 302W, 327 stroker 347 stroker, 351W CHRYSLER 360, PONTIAC 400, 455 BIG BORE FLAT TOP.....................from 564.86 BBC 427, 454, 8.11/496 marine, 502 FORD 427FE, 427 stroker, 428, 460 PONTIAC 455, CHRYSLER 440 SMALL BLOCK REVERSE DOME......from 572.00 SBC 350-434, 6.2L marine FORD 302W, 347 stroker, 351W, 351W stroker CHRYSLER 340/360 4 stroker BIG BORE REVERSE DOME............from 621.93 BBC 454, OLDS 455, BUICK 455 BIG BORE DOME.........................from 598.01 BBC 396, 427, 454, 502, 540, 572 crate, 7.4, 8.1L, 8.2L FORD 427FE P I S T O N S GREAT WISECO QUALITY NEW! LS 5.3 WITH RINGS - COATED.........CALL Includes metric series ring set. Some flat top & dish available. NEW! QUICK-16 BBC.......................$695.85 Strutted forgings - stronger, lighter. NEW! MODULAR FORD WITH RINGS - COATED...................... CALL Available for 2V-4V heads, flat top, dish & dome. CHRYSLER HEMI 5.7 & 6.1L - COATEDfrom 705.39 Rings included. Both available 9:1 and 11:1 compression @ 3.580 & 4.080 strokes. K-1 cranks available, see page 5 LS SERIES FLAT TOP - COATED............. 627.99 Available std. to 4.125 bores, stock stroke. LS SERIES REVERSE DOME - COATED.....699.84 Available std - 4.200 bores, stock stroke to 4.125 Turbo & NOS applications. LS SERIES DOME - COATED..................699.84 Domes available to 4.070 bores, stock stroke & strokers. 350 H/D FLAT TOP...............................562.40 350 PRO-LITE....................................562.44 Ultralight 4BBL design for 1/16 rings. 350 PRO-LITE II GAS PORTED................629.89 Ultralight 4BBL design for.043 and.047 rings. 350 XLS 2 BBL ULTRALIGHT..................620.59 Solid cam valve reliefs. Uses 1/16 rings. 350 XLS 4 BBL/PRO ULTRALIGHT............678.80 Roller pockets for angle milled heads,.043 or.047 ring grooves, lateral gas ports included. SBC SPRINT SERIES DOME.................. 640.01 4.030-4.165 bores, various strokes & rod lengths. BBC DOME.......................................659.38 All popular bore, stroke and rod length combos. Full round skirt design. BBC BIG CHIEF DOME.........................709.82 Lateral gas ports, 4.560-4.625. Stroker applications. Low expansion 4032 alloy New professional series includes non-file metric rings & lighter pins NEW! PROFESSIONAL SERIES WITH RINGS LS2, LS3, LS6 DISH.....................from 597.80 SBC FLAT TOP.................................597.80 SBC DISH/DOME..............................597.80 SB FORD FLAT TOP 331/347................597.80 MODULAR 2V FLAT TOP.....................597.80 DODGE HEMI.....................................Call SBC FLAT TOP............................. from 469.05 SBC ULTRALIGHT 2VR & 4VR...........from 516.38 SBC DISH/DOME...........................from 507.02 BBC FLAT TOP.............................from 490.32 BBC DISH/DOME...........................from 538.56 FORD/CHRYSLER/PONTIAC/OLDS...............Call P I S T O N S Professional quality in every part Latest forging and machining techniques SBC FLAT TOP........................ from $89.30 ea. Late model Stock, Milled X/L 4-BBL Series, H/D SBC DOME..............................from 95.48 ea. BBC DOME & SUPER SERIES.......from 102.60 ea. CHRYSLER/FORD................................... Call CUSTOMS.............................................Call See our Sport Compact Catalog for Imports. 2 www.raceeng.com 561-533-5500 SALES sales@raceeng.com 561-533-0151 FAX

PINS / PISTONS / RINGS GAPLESS TOP RINGS Premium 2618 alloy forgings FSR series for maximum strength & reduced weight Replacements & customs available SMALL BLOCK CHEVY ULTRALIGHT TO H/D........................from 675.87 TOUR SERIES H/D-GAS PORTS...........from 768.44 FSR TOUR U/L-GAS PORTS................from 853.48 DISH SERIES (SOME GAS PORTED).....from 722.15 DOME - ALL HEAD STYLES................from 667.92 LS SERIES LS1, LS6, ZO6, 5.7L, 6.0L FLAT TOP......................................from 675.87 REVERSE DOME.............................from 778.16 BIG BLOCK CHEVY FLAT TOP......................................from 759.85 DISH/DOME...................................from 750.12 FORD MODULAR 4.6 LAT TOP - 3V & 4V.......................from 675.87 4.6 DISH - 3V & 4V...........................from 722.15 5.4 DISH.......................................from 722.15 FORD, CHRYSLER, BUICK & CUSTOMS.............Call WRIST PINS Chromoly and Tool Steel Alloys Taper & Straight Wall Designs When ordering please specify Straight or Chamfered End. SIZE STRAIGHT WALL TAPER WALL.875x2.500 112g (.150 ) 89g (.125 ).912x2.500 89g (.109 ) 97g (.125 ).927x2.000 74g (.110 ) N/A.927x2.500 97g (.120 ) 89g (.120 ) 117g (.150 ) 105g (.150 ).990x2.930 151g (.150 ) 122g (.150 ) 151g (.180 ) Many more sizes and lengths In Stock! CP CHROME MOLY PINS........................ $10.75 ea. CP ALLLOY PINS................................ 22.50 ea. JE LOW CARBON WRIST PINS............... 10.10 ea. JE PREMIUM WRIST PINS...................... 20.48 ea. RACE ENGINEERING WRIST PINS.875/.912/.927/.990 diameters Wide range of wall thickness and length TOOL STEEL STRAIGHT WALL................ $15.90 ea. TOOL STEEL TAPER WALL.................... 21.76 ea. Import Applications Available ~ See our Sport Compact Catalog Gapless top rings help prevent ring flutter induced by pressure buildup between the top and 2nd rings. Improved Ring Seal. 1/16 x 1/16 x 3/16 SETS 4.000 +.......................................$256.85 4.125 +.........................................256.85 4.250 +.........................................261.75 4.500 +.........................................261.75 043/1.2/1.5mm widths available........... Call RINGS FILE FIT RING SETS STD. TENSION OIL RING LOW TENSION OIL RING 4.000 x.043.......................... N/A 209.05 4.000 x 1/16.......................... 110.44 108.22 4.125 x.043.......................... N/A 220.05 4.125 x 1/16.......................... 132.33 127.23 4.250 x 1/16.......................... 134.66 131.22 4.500 x 1/16.......................... 160.42 155.18 HELLFIRE RINGS.................. Call Call PREMIUM RINGS LOW TENSION Napier Rings Available! OIL RING 4.000 x.043-1.5-3mm..............................$184.00 4.000 x.043-043-3mm...............................184.00 4.000 x 1.5-1.5-3mm.................................172.00 4.125 x.043-043-3mm...............................184.00 4.125 x.043-1.5-3mm...............................184.00 FILE FIT RINGS STD. TENSION LOW TENSION OIL RING OIL RING 4.000 x.043-043-3mm.............. N/A $135.00 4.000 x 1/16-1/16-3/16.............. 81.82 81.82 4.125 x 1/16-1/16-3/16.............. 81.82 81.82 LOW TENSION 305/350 METRIC SERIES RINGS OIL RING 3.766 + 004 x 1.5-1.5-3mm.........................$109.00 3.796 + 004 x 1.2-1.5-3mm..........................125.00 4.035-4.065 x 1.5-1.5-3mm...........................110.00 LOW TENSION GFX RINGS OIL RING 4.000-4.155 x 1.2-1.2-3mm......................$23.49 cyl C.O.D.s 561-533-5500 ACCEPTED SE HABLA ESPANOL 3

V8 RODS / FORGED & BILLET American engineering and manufacturing Premium rod for aggressive applications SMALL BLOCK CHEVY: LIGHTWEIGHT PARABOLIC BILLET........$1091.09 Durable enough for most high powered oval track classes. ULTRALIGHT PARABOLIC BILLET...........1139.05 Moderate HP, 360 Sprint with spec heads, 8200 RPM NEW SPORT LIGHT BILLET..................1139.05 VERY LIGHTWEIGHT - 305 Sprint, Limited Late Model and Sportsman classes. BIG BLOCK CHEVY: BIG BLOCK CHEVY BILLET...................1191.30 RODS Large maxi-light inventory Singles and customs available NEW! LS-1 SPORTSMAN FORGED.......$595.07 6.100 & 6.125 lengths SPORTSMAN SBC - 3/8 Capscrew......... 595.07 Available with capscrews or nut & bolt, press fit or bushed STROKER SPORTSMAN - 7/16............ 673.82 With stronger 7/16 capscrews for 550HP, 8200 RPM MAXI-LITE SBC BILLET.................... 1339.14 Available in ultralight thru extreme HP profiles. With 3/8 or 7/16 capscrews. Lightest rod available within a specified power range. FORD 302 SPORTSMAN FORGED.......... 673.81 5.090 (stock) to 5.315 length, Ford & Chevy journals FULL LINE OF CROWER FORGED AND BILLET RODS AVAILABLE.............. Call STEEL RODS SBC available in std. and lightweight versions ARP capscrews/bolt upgrades available SIR I-BEAM RODS-5140: SBC L/W: 5.700 to 6.200....................... $219.00 BBC: 6.135, 6.385................................ 319.00 SB FORD: 302W, 351W........................... 229.00 460 FORD......................................... 299.00 H-BEAM RODS: NEW LS-1: 6.100-6.300.................from $489.00 SBC: 5.700 to 6.250....................... from 359.00 SBC SUPERLIGHT: from 535g...................459.62 BBC: 6.135-6.800................................389.00 NEW FORD MODULAR: 3.8-4.6L........ from 419.00 SB FORD: 289, 302, 351W/C...................419.00 NEON, SRT 4, PT CRUISER....................309.00 ECOTEC...........................................319.00 CHRYSLER................................. from 489.00 ALUMINUM RODS Latest forging and machine programs Fast delivery on all customs! SMALL BLOCK CHEVY........................ $962.80 BIG BLOCK CHEVY...................... from 1002.64 CHRYSLER.......................................... Call CUSTOMS........................................... Call CONNECTING RODS SBC I-BEAM..................................... $228.00 Stronger 4340 alloy STEEL RODS Lightweight 4340 forging Most available for large and small journals SPORTMASTER SBC................ FROM $717.25 5.700-6.125 NEW! LS-1 I-BEAM SPORTSMASTER....... 717.25 Stock Length,.927/.944 wrist pin Includes ARP 2000 capscrews TOURLITE SBC............................ 1406.00 NEW! MODULAR 4.6/5.4 PRO I-BEAM...... 1410.00 Billet series - Includes ARP 2000 capscrews NEW! DODGE HEMI 5.7/6.1 PRO I-BEAM... 1391.20 Billet series - Includes ARP 2000 capscrews CONNECTING RODS Many features to enhance performance and simplify assembly ARP 2000 hardware included Super premium series/competively priced SBC I-BEAM..................................... $826.50 SBC H-BEAM.................................... $560.50 BBC I-BEAM 6.385.............................. $826.50 BBC H-BEAM.................................... $592.80 LS-1/LSX H-BEAM.............................. $593.75 LS-1 I-BEAM..................................... $826.50 FOR IMPORT APPLICATIONS, SEE OUR SPORT COMPACT CATALOG. 4 www.raceeng.com 561-533-5500 SALES sales@raceeng.com 561-533-0151 FAX

V8 CRANKSHAFTS ULTRA-STOCK GM CRANKS Machined for us by Callies and Crower Maintains stock GM part number Large radius fillets, stronger than stock Manufactured from raw GM steel cores 50# STOCK PLUS GM CRANK................ $999.52 Includes 2 lightening holes 48# ULTRA-STOCK GM CRANK.............. 898.22 Includes 4 lightening holes CRANKS NEW 48 # CAST STEEL GREAT VALUE! SMALL BLOCK CHEVY: 9000 CAST STEEL: 3.480/3.750..........From $199.00 48# LIGHTWEIGHT CAST 350................ 399.00 Reduced counterweight height for increased acceleration 43# SUPERLIGHT FORGED:................... 995.00 3.480 & 3.500 Strokes See Our Sport Compact Catalog for Scat Import Cranks CRANKSHAFTS STEEL CRANKS SMALL BLOCK CHEVY: CAST STEEL - 350/383/400............. from $149.00 LS-1 4340 FORGED: Stock-4.100........... 819.00 4340 STEEL: 3.250-4.125....................... 499.00 LIGHTWEIGHT FORGED....................... 525.00 UNDERCUT FORGED........................... 625.00 Strokes from 3.350-3.500, rod journals from 1.888-2.100. May be rifle drilled. BIG BLOCK CHEVY: CAST STEEL: 4.000, 4.250.................... $229.00 4340 FORGED:.................................. 599.00 FORD CRANKSHAFTS: CAST STEEL: Small Block..................... $219.00 CAST STEEL 460: 3.850-4.300................ 239.00 4340 FORGED: Small Block...................... 529.00 4.6L 4340 STROKER: 3.750................... 729.00 BIG BLOCK CHRYSLER: FORGED......................................... $729.00 CRANKS Stock-Plus and Pure-Stock retain GM part # Ultralight available in many journal sizes PURE-STOCK GM STEEL CRANK.......................... $939.08 No lightening holes, stronger than stock. STOCK PLUS GM CRANK............. 999.52 Lightened to 50#. Available with 2 journal. 38# ULTRALIGHT SERIES............... 2597.76 NEW ITEM SMALL BLOCK CHEVY: NEW! LS-1 COMPSTAR...................... $899.90 43# COMET.................................... 953.25 COMPSTAR...................................... 656.00 DRAGONSLAYER.............................. 999.94 MAGNUM...................................From 1571.11 BIG BLOCK CHEVY: COMPSTAR.................................... $823.00 DRAGONSLAYER............................. 1112.00 MAGNUM.................................. From 1349.00 New! HEMI LATE MODEL: COMPSTAR 4.050 STROKER................ 1020.00 Fits either motor K1 CRANKSHAFTS Great Value Tolerances kept within.0001 4340 Steel alloys 350-50# LEGAL................................ $728.78 Includes radiused leading/trailing edges SBC FORGED................................... $624.66 43# SBC........................................ $1047.61 Fully machined on all surfaces, similar to billet LS1-3.622-4.250.............................. $780.83 BBC FORGED................................... $723.90 BBC LIGHTWEIGHT.......................... $1210.28 HEMI 4.080..................................... $796.28 Fits 5.7 & 6.1 - Wiseco pistons available SB & BB CHRYSLER............................... Call SB FORD 302-351................................... Call C.O.D.s 561-533-5500 ACCEPTED SE HABLA ESPANOL 5

V8 ENGINE KITS and BEARINGS BEARING SPACERS Reusable main bearing inserts Thick bearing adapts LJ rod to SJ crank SJ MAIN to LJ BLOCK...................... $145.00 350 MAIN to 400 BLOCK..................... 59.63 2.100 ROD to 2.000 CRANK................. 87.00 ALL ROTATING ASSEMBLIES INCLUDE: FORGED PISTONS - Your Choice STEEL CRANKSHAFT - Your Choice FORGED CONNECTING RODS - Your Choice PREMIUM RING SET INCLUDED CHAMFERED BEARINGS - Your Choice BALANCING IS AVAILABLE CHOOSE FROM: Callies, Carrillo, Clevite, CP, Crower, Eagle, Federal Mogul, JE, K-1, King Bearings, Pro Star, Scat, SRP, Total Seal and Wiseco. Too Many Combinations to List - Here s a Sample! LS-1 TURBO ASSEMBLY.............. from $1999.00 LS-1 COMPRESSION KIT............... from 2149.00 Wiseco forged pistons, Eagle crank and H-beam rods. Strokers available. 305 ULTRALIGHT KIT.................... from 1272.00 Pro Star pistons (by Wiseco) with low friction metric rings. 305-406 STREET STOCK KIT......... from 1029.00 Pro-Tru pistons and rings, Eagle I-beam rods, Scat 9000 crank, King bearings. 4-Eyebrow Pistons Available! 350-434 SPORT KIT...................... from 1435.00 Pro-Tru pistons and rings, Eagle H-beam rods and 4340 forged crank, King bearings. SPORT LIGHT 350........................ from 1625.00 Ultralight Wiseco pistons, 48# Scat crank Lightweight Eagle H-beam rods. NEW! SUPERLIGHT FLAT TOP 350 KIT from 2309.00 Ultralight flat top pistons, thin metric rings, lightweight forged or billet rods, 43# Callies Steel crank. SBC COMPRESSION KITS.............. from 1485.00 Wiseco pistons, Eagle forged crank and H-beam rods. Strokers available. BBC KITS.................................. from 1669.00 Wiseco pistons, Eagle crank & rods. NEW! DODGE HEMI KITS....................... CALL DODGE HEMI STROKER KITS.................. CALL Wiseco pistons, forged steel crank and rods...available for Forced Induction and compression applications. NEW! MODULAR ENGINE KITS................. CALL Available for turbo, compression, NOS and strokers. ALREADY OWN A CRANK? NO PROBLEM... WE CAN STILL BUILD A KIT FOR YOU! For a great selection of Import Engines, see our Sport Compact Catalog. COATED BEARINGS Chamfered for aftermarket cranks SEAMLESS CAM BEARINGS................... $59.25 SBC 2.000/2.100 ROD BEARINGS.............. 85.00 SBC MAINS 350/400.............................. 99.49 BBC ROD BEARINGS.............................. 99.07 BBC MAIN BEARINGS........................... 132.29 CHEVY LS / MODULAR / HEMI COATED BEARINGS.. CALL Chamfered for aftermarket cranks. Available for aluminum rods. Mains are 3/4 grooved for improved oiling. ROD BEARINGS : STEEL ROD ALUM. ROD SBC 1.888 (2.008 )............... $97.13 N/A SBC 2.000......................... 83.42 $95.00 SBC 2.100......................... 88.63 86.35 BBC ROD........................... 98.50 108.00 MAIN BEARINGS: CHAMFERED SBC SJ MAINS.........................................$69.27 SBC LJ MAINS...........................................84.19 SBC 400 MAINS..........................................72.11 BBC MAINS..............................................90.96 ROD BEARINGS : STEEL ROD ALUM. ROD SBC 2.000......................... $53.75.........$55.80 SBC 2.100......................... 59.22..........59.44 BBC 2.200......................... 70.56..........70.45 MAIN BEARINGS : CHAMFERED SBC LARGE JOURNAL...............................$59.47 SBC 400 JOURNAL.....................................52.09 BBC MAINS..............................................74.59 FYI: King Bearings cannot be coated! ACL ACL BEARINGS BEARINGS CAM BEARINGS SBC PRO............................................. $24.00 BBC PRO............................................. 36.71 CLEVITE/MICHIGAN BEARINGS ROD BEARINGS : STEEL RODS SBC 2.000........................................... $9.38 cyl SBC 2.100........................................... 12.00 cyl BBC 2.200............................................ 12.25 cyl MAIN BEARINGS : SBC SMALL JOURNAL................................ $63.74 SBC LARGE JOURNAL................................ 96.31 SBC 400 MAINS........................................ 66.34 BBC MAINS............................................. 94.98 Chamfered for aftermarket cranks. Available for aluminum rods. BEARINGS AVAILABLE FOR MOST APPLICATIONS...CALL OR EMAIL: sales@raceeng.com 6 www.raceeng.com 561-533-5500 SALES sales@raceeng.com 561-533-0151 FAX

V8 VALVE TRAIN and ESSENTIALS STAINLESS STEEL VALVES 5000 SERIES: Good street/strip choice. Flat face, undercut, some longer lengths available. 6000 SERIES: Race quality valve for most applications. Different lengths and configurations available. 1000 SERIES: Ultimate stainless valve for extreme RPM, severe boost or spring pressures. Super Alloy, Hollow Stem & Titanium Valves Available - CALL SMALL BLOCK CHEVY: #5000 #6000 #1000 1.500 EXH.............. from $8.95 $16.18 N/A 1.600 EXH............. from 7.43 16.18 23.14 1.940 INT............... from 8.95 16.18 N/A 2.020 INT............... from 7.79 16.18 22.03 2.055 INT............... from 10.04 16.18 22.03 2.080 INT............... from 10.04 15.28 22.03 2.100 INT...................... N/A 16.43 22.19 BIG BLOCK CHEVY: #5000 #6000 #1000 1.880 EXH............ from $10.18 $17.85 $22.37 1.940 EXH..................... N/A 17.85 22.37 2.190 INT............... from 10.66 17.85 22.37 2.250 INT............... from 10.66 18.18 22.79 2.300 INT...................... N/A 18.18 22.79 FORD, CHRYSLER, OLDS, PONTIAC & MORE........... call for info or email: sales@raceeng.com ULTIMATE BLOCK FILLER Quick set-up. Easy to use Block can be machined in 24 hrs Bonds well to metal Will not separate with age Container will do 1 engine 25# CONTAINER $69.00 NEW! 64gm ULTRALIGHT HI-PRESSURE SOLID LIFTERS Withstands open pressure to 430# Includes oil hole for reduced wear SBC ULTRALIGHT LIFTERS $399.20 EASY TO USE! TAPERED RING INSTALLERS..........from $27.25 Prevent ring damage during installation - bores from 3.766-4.625. LOWER PRICES MID SLEEVE KITS Full Darton Line Available! FORD MODULAR....... $926.25 CHEVY LS-1/LS-6....... 1359.00 DODGE HEMI 6.1L...... 1513.40 ENGINE BUILDER TOOLS PISTON RING FILERS Motorized..............$259.35 Cordless, with charger and carrying case. Hand Operated........ 59.00 HITE-MIKE................. $65.00 Accurately measures installed valve spring height. Model 1 - from 1.500-2.100 Model 2 - from 1.300-1.850 MLS HEAD GASKETS Latest technology multiple layer steel system Wide selection of bores and thickness SBC -.030/.040 Thickness.................... $72.37 ea. LS1 -.051 Thickness........................... 72.37 ea. BBC - includes Mark IV, Mark V............ from 81.33 ea. SB FORD - 302/351W-N.................... from 72.37 ea. FORD MODULAR........................ from 109.12 ea. NEW! DODGE HEMI 5.7/6.1............. from 87.36 ea. SB CHRYSLER............................ from 72.37 ea. BB CHRYSLER............................ from 79.36 ea. Most domestic and import applications available. Call or email: sales@raceeng.com the LOCKBUSTER TM Safely removes angle tipped spiral locks. Older scallop tipped locks require simple modification prior to installation. REDUCED PISTON DAMAGE! LOCKBUSTER KIT....... $95.00 Includes case, handle and choice of one head. HEADS ONLY............. 75.00.912/.927/.990. NEW! LOCK INSTALLATION TOOL Now available for quick and easy installations SPIRAL LOCK INSTALLER..................... $69.00 WIRE LOCK INSTALLER........................ $69.00 SPIRAL LOCKS IN STOCK ~ SETS OR BULK ~ CALL C.O.D.s 561-533-5500 ACCEPTED SE HABLA ESPANOL 7

2300 WHAT S NEW NEW From 265g ULTRALIGHT 2-RING SERIES New technology in piston machining and ring design makes thin 2 ring pistons practical and effective. Available.030/.040. Requires only a torque plate machined block - see tech note below. Dramatic friction reduction Improves off-the-corner acceleration Great ring life Super thin 1mm top / 2mm oil Pistons are fully lightened No special cylinder prep required Customs available for other rod lengths 2 Ring 2300 Piston - 5.200-5.930............ $449.00 Wiseco 2 ring set............................ 24.00 / cyl TECH NOTE: 2 ring pistons require only a torque plate machined block, as does any quality race engine. Race Engineering stocks small journal, raceready blocks that are compatible with all 2 & 3 ring pistons. See page 11 NEW Lower Prices BILLET STROKER CRANKS New series of affordable billet cranks 4340 billet alloy, not cast like the other guys Available for large and small mains - spacers not required Strokers for 2500/2700/2850cc Billet Cranks................................... $1399.00 Profile Beams for Reduced Windage ULTRALIGHT BILLET RODS Custom machined by leading US companies 4340 Steel alloy with ARP 2000 capscrews Profiled side beams reduce windage & oil drag Lightest rods in the US From 470 grams NEW! 7mm ULTRALIGHT VALVE TRAIN KIT Thinner valve stems reduce weight and improve flow. Requires less spring pressure, frees up horsepower and improves valve train response. Full kit includes special lightweight Ferrea stainless valves (1.810 & 1.575 ), guides, conical springs, retainers, lash caps, seats, locks & seals. Dramatic improvement in performance without porting. Individual components available. 7mm VALVE TRAIN KIT............................ $559.00 With Steel Retainers (#FD-H1000) 7mm VALVE TRAIN KIT............................ $659.00 With Titanium Retainers (#FD-H1000T) HEAD STUD KIT FOR MILLED HEADS Custom kit with shorter studs avoids stacking washers to engage threads. Uses upgraded ARP 2000 studs to withstand higher compression. Improves head gasket seal. 2300 HEAD STUDS for MILLED HEADS......... $179.00 (HSK-2300) 8500+ RPM ANTI PUMP-UP HYDRAULIC LIFTERS Eliminate high rpm valve float Will not come apart like stock type lifters Anti Pump-Up Lifters.................................. $9.50 NEW! Race Engineering Profiled I-Beam... $172.00 5.700, 5.840, 5.930 for 2.000 journal. SUPERLIGHT Only 520g NEW! SPORT H-BEAM BILLET RODS New H-Beam series is lighter than other forged rods Durable 4340 alloy with ARP 2000 capscrews 5.700 x 2.000 Superlight H-Beam........... $449.10 COMETIC FULL GASKET SET Full gasket & seal set to complete entire engine. Does not include head gasket to allow for personal choice. COMETIC GASKET SET........................... $148.00 8 www.raceeng.com 561-533-5500 SALES sales@raceeng.com 561-533-0151 FAX

2300 PISTONS and RODS E N G I N E E R I N G TM Gas Ports Available Metrics Only Ultralight BILLET RODS Custom machined by leading US companies 4340 Steel alloy with ARP hardware Lightest rods in the US ULTRALIGHT PISTONS All ultralight and stroker pistons are custom machined for us by Wiseco and CP Pistons. All include wrist pins (except as noted) and oil support rails where needed. Ultralight 2000 only 285 grams 2000-5.700 ROD........................... ea. $109.75 Ultralight 2300 & Stroker Metric Series Uses thinner metric rings for improved acceleration. Excellent ring life. Custom bores available. Custom made by Wiseco & CP 2300 - Std Rod.................................. $419.00 2300-5.700, 5.840 Rod......................... 449.00 2300-5.930 Rod* (265g)....................... 439.00 2500-5.700 (CP)............................ ea. 114.90 Stroker Metric by CP........................ ea. 114.90 Fits 2300-5.930, 2600-5.765, 2700-5.700, 2850-5.600 for non-arca heads ARCA Pistons.................. see H/D Series below Gas Ports..................... Add $30.00 for Wiseco Add $49.50 for CP Pistons H/D SERIES 2300-5.840 ROD 1/16 or metric rings............ $449.00 2500-5.700 ROD 1/16 or metric rings.............. 449.00 Stroker Metric by Wiseco*..................... 419.00 Fits 2300-5.930, 2600-5.765, 2700-5.700, 2850-5.600 for non-arca heads ARCA Series................................. ea. 107.00 Fits 2600-5.765, 2700-5.700, 2850-5.600, Buttons required ARCA Metric Series-Gas Ported........... ea. 119.00 WRIST PIN BUTTONS........................... ea. 9.00 TURBO SERIES 2300 - Stock & 5.700 rod...................... $475.00 Turbo 2500/2700............................ ea. $137.50 *requires.875 wrist pins, not included. TECH NOTE: Some compression heights and rod lengths have been redesigned to achieve zero-deck at approximately 8.350-8.358 block heights. 5.700 x 2.000 ULTRALIGHT I-BEAM........ $728.64 Approximately 450g @ 5.7 length Custom made by Manley; recommended for stock stroke only. CROWER MAXI-LIGHT RODS................. $729.00 (from 480g @ standard length) 5.200, 5.700, 5.765, 5.840, 5.930 5.700-5.765 are compatible with stroker cranks 5.200 for stock Ford journals only 2300 FORGED STEEL RODS Stock to 5.930 IN STOCK Bushed for full-floating pins E N G I N E E R I N G SUPERLIGHT PRO-ROD....................... $397.70 5.700, 5.840, 5.930 length, all for 2.000 Chevy pins. STROKER PRO-ROD............................ 419.00 5.700 with Honda journal for our 2700 sportsman crankshaft 5.700 with 2 Chevy journal for our 2700 billet crankshaft LIGHTWEIGHT SPORTSMASTER 5.700....... $389.50 For stock 2.047 Ford journals 2000/2300 SPORTSMAN RODS............... $398.23 Available for stock and 2 Chevy journals. Choice of nut/bolt or capscrews. Most available press fit. Stock to 5.700 lengths. TM FORGED PISTONS All popular bore sizes Pins, locks and spacers included 2000 for 2300 RODS (5.200 )................. $299.00 2300 for STOCK RODS......................... 299.37 2300 for 5.700 RODS.......................... 299.37 Available +.030-060. 2850cc STROKER RODS...................... $429.12 2.600 with 2 Chevy journals for our 2850 billet crankshaft TECH NOTE: We have changed some rod lengths in our program to standardize machined block heights. Our popular 5.830 rod had been lengthened to 5.840. Our super-long 5.940 rod has been shortened to 5.930. We will continue to stock replacements as long as feasible. C.O.D.s 561-533-5500 ACCEPTED SE HABLA ESPANOL 9

2300 CRANKS /2300 ENGINE KITS RACE-PREP CRANKS GREAT VALUE! Select cores are cleaned and magnafluxed Equalized, indexed, straightened Fully balanced New pilot bearing installed Lightweight cranks feature turned down counterweights for improved acceleration 2000/2300 CRANKSHAFT..................... $365.00 Stock and 2.000 Chevy journals. 2000/2300 LIGHTWEIGHT CRANK............. 465.00 Improved acceleration, reduced oil drag. 2300 SMALL JOURNAL L/W CRANK.......... 465.00 Reduced bearing speed for improved acceleration. Available for Ford, 2.000 Chevy and Honda journals. 2500 SUPERLIGHT CRANK..................... 719.00 5# weight removal included, stock and 2.000 Chevy journals. 2600 SUPERLIGHT CRANK..................... 696.18 From our winning ARCA assembly, with Honda rod journals. Must use our 5.765 Maxi-Light rods! 2700 SUPERLIGHT CRANK..................... 849.00 Requires our 5.700 rod (#FD-14128). Features small journal mains and Honda rod journals for reduced bearing speed (free horsepower) NOTE: 2500, 2600, 2700 cranks above require small main blocks or bearing inserts. NEW Lower Prices BILLET STROKER CRANKS New series at greatly reduced prices 4340 billet alloy, not cast like the other guys Available for large and small mains - spacers not required Strokers for 2500/2700/2850cc Billet Cranks................................... $1399.00 BEARING INSERTS $129.00 Install small journal cranks into large journal blocks. Works with any main bearing. REUSABLE! TECH NOTE: We recommend the installation of a strap kit (see page 12) to reinforce stock main caps when installing a 2500cc or larger stroker crank! 2000 with 5.700 RODS................ from $1369.00 2300 with 5.200 RODS................. from 1169.00 2300 with 5.700 RODS................. from 1159.00 2300 with 5.840 or 5.930 RODS..... from 1375.00 2300 ULTRALIGHT with 5.700-5.930 RODS.. from 1869.00 Ultralight metric pistons, XL rods, light crank, light tapered pins Best of Everything! 2500 STROKER with 5.700 RODS.... from 1655.00 Now available with optional large journal billet crank. 2600 STROKER with 5.765 RODS.... from 2179.00 Includes Crower Maxi-Light billet rods. 2700 STROKER with 5.700 RODS.... from 1919.00 Now available with large or small main billet crank. 2850 STROKER with 5.600 RODS.... from 2435.00 Rods are +.400 longer than the other guys. Includes billet crank! ENGINE KITS ALL CRANK KITS INCLUDE: FORGED PISTONS: H/D, U/L or Metrics BALANCED CRANKSHAFT: Standard or Light 4340 CONNECTING RODS: Forged or Billet FILE-FIT RINGS: Standard or Metric BEARINGS: Federal Mogul, King, or Clevite NOTE: Kits can be ordered without crankshafts SPECIAL PISTONS FOR ARCA STYLE ALUMINUM HEADS ARE IN STOCK! OPTIONS: Add light pistons, crank, rods and wrist pins, low friction metric rings or Total Seal rings. Light parts improve off-the-corner acceleration and allow you to drive deeper into the turn. TECH NOTE: Longer rods improve performance on longer tracks. Aggressive drivers may see improved performance on short tracks. We re happy to help you select the correct length for your application. 10 www.raceeng.com 561-533-5500 SALES sales@raceeng.com 561-533-0151 FAX

2300 BLOCKS/RINGS/PINS/BEARINGS 2300 RACE PREP BLOCKS Select cores cleaned and pressure tested Machined with torque plates and align honed Modified auxiliary bearings installed Stroker blocks strapped for safety, ARP main studs included Small journal mains for reduced bearing speed Always in stock (+030) RACE BLOCK - Small Journal................ 689.00 Modified for fuel pump. RACE BLOCK - Strapped Small Journal..... 895.00 Includes strapped mains and ARP main studs Recommended for strokers and extreme RPM ASSEMBLED SHORT BLOCKS Professionally assembled Bearings and rings fit Spec Sheet with clearances included 2500 and larger motors include strapped mains Any combo can be assembled for you, generally in less than 3 business days. We always stock several popular assembled short blocks for immediate delivery, even overnight! 2300 with 5.200 to 5.930 RODS...... from $2285.00 2300 ULTRALIGHT....................... from 2725.00 2500 with 5.700 RODS................. from 2985.00 2700 with 5.700 RODS................. from 3249.00 2850 with 5.600 RODS................. from 3765.00 Includes billet crankshaft. 2300 PISTON RINGS RACE ENGINEERING FILE-FIT PISTON RINGS: FILE-FIT MOLY RINGS............................... $79.50 Available 1/16 x 1/16 with 3/16 or 3mm oil rings. Bores +.030/.040 FILE-FIT METRIC RINGS............................. 99.00 The ultimate for reduced friction. Great ring life. Measures 1.2 x 1.5 x 3mm. Now Available: +.040 bores! NEW! WISECO 2 RING METRIC RINGS........... cyl. 24.00 Features ultra thin 1.0mm top and 2.0m oil rings. Must use 2 ring series pistons and torque plate machined block...see above. TOTAL SEAL GAPLESS RINGS: 2000/2300 FULL SET w/gapless 2ND............ $149.69 Available in 1/16 or 5/64 widths. 2300 METRIC 2ND RINGS ONLY.................... 25.20 1.5mm 2nd rings - add to our file-fit metric sets. 1/16 GAPLESS TOP RING SET..................... 157.01 With 3/16 or 3mm oil rings. METRIC GAPLESS TOP RING SET................... 200.42 1.2 x 1.5 x 2.8mm widths. TECH NOTE: Gapless top rings work to reduce ring flutter induced by tight 2nd ring end-gaps. Greatly improved ring seal. Recommended for blocks machined without torque plates. WRIST PINS SUPERLIGHT STRAIGHT WALL TOOL STEEL PINS:........................... $15.90 ea..927 diameter, approximately 97g. SUPERLIGHT TAPER WALL TOOL STEEL PINS............................ 21.76 ea..875/.912/.927 diameters. Additional weight savings without compromising strength. From 89-96g. 4130 CHROME MOLY PINS............. from 10.75 ea..875/.912/.927 diameters at.150 wall. 4130 CHROME MOLY 97g PIN.......... from 10.75 ea..927x2.500x110 2.000 DOUBLE CHAMFERED ROD BEARINGS...... $49.00 Both edges chamfered, perfect for large radius Chevy journals. SMALL JOURNAL MAIN BEARING SPACERS........... 129.00 Reusable! Install small journal cranks into large journal blocks. MODIFIED AUXILIARY BEARINGS.................... 42.00 Forces oil to the distributor gears for reduced wear. ACL SUPERLIGHT saves weight! See pg. 3 for More Wrist Pin Info. ENGINE BEARINGS BEARINGS & SPACERS 2300 CAM BEARINGS PRO-SERIES HONDA ROD JOURNAL............... $85.00 For offset ground stroker crank #FD-27HL 2300 CAM BEARINGS................................. 24.00 FULL-GROOVE CAM BEARINGS - Improved cam oiling! 26.00 Great in Dirt! 2300 LARGE JOURNAL MAINS...................... $45.35 2300 STOCK JOURNAL ROD BEARINGS............. 27.00 2300 BEARINGS SMALL JOURNAL - 3/4 GROOVE MAINS............ $53.88 LARGE JOURNAL - 3/4 GROOVE MAINS............. 79.40 NEW! PRO-SERIES 2300 ROD - STOCK JOURNAL.... 64.24 2300 ROD - STOCK JOURNAL....................... 25.34 HONDA JOURNAL ROD BEARINGS - 2600cc......... 66.68 MICHIGAN/CLEVITE BEARINGS 2000 ROD BEARING.............................. cyl $9.00 2000 MAIN BEARING............................. set 61.67 2300 LARGE JOURNAL MAINS................... set 56.00 2300 ROD - STOCK JOURNAL.................... cyl 7.00 C.O.D.s 561-533-5500 ACCEPTED SE HABLA ESPANOL 11

ULTRALIGHT ADJUSTABLE CAM SPROCKETS Machined billet/hard coat for durability Adjust cam timing without loosening center bolt Reduced weight improves cam response ARP 12-pt hardware included U/L ROUND TOOTH KIT (#FD-170)............ $239.00 Round tooth belt reduces power robbing friction. Includes ultralight auxiliary gear, lower gear and H/D belt. U/L ADJUSTABLE CAM SPROCKET/SQUARE TOOTH (#FD-122XL) Lightest available!........... 99.00 H/D SQUARE TOOTH BELT (#FD-121HD)....... 16.00 H/D ROUND TOOTH BELT (#FD-171)........... 28.50 BILLET TENSIONER (#FD-128)................... $75.00 Not a modified stock tensioner. 100% new design with double ball bearing construction. MULTI-INDEX CAM SPROCKET (#FD-10530) $59.00 Stock appearance/ multi-keyway allows cam timing adjustments SUPERTRICK CAMSHAFTS Designed for track rules and engine combinations. 2300 VALVE TRAIN REPLACEMENT PARTS IN STOCK $219.90 HYDRAULIC GRINDS: 242H6 For.400 lift or 200# cranking compression rules. Great for stock length rods. C4-6.448 lift for.450 lift rules (will not pass at zero lash) C294H5.488 lift is very fast at both ends. SOLID GRINDS: 298S5 NEW Grind for.425 rules (reads.450 at zero lash). Very fast to 8500 RPM. 285S5.470 lift for.450 rules (will not tech at zero lash) 290S5.481 lift, good choice for stock stroke and rods 295S5 NEW Grind.489 lift (.475 after lash) very fast on 1/4-3/8 mile tracks, loves stock to 5.7 rods. C3-5.500 lift - for serious driver. Likes big tracks and very long rods. 5500 RPM minimum C3-6.528/538 lift - best all-around solid grind. Likes 5.7 and longer rods and bigger tracks. TECH NOTE: Most hydraulic cams can be run with solid adjusters with lash set at.004. Solid cam #295S5 can be used with hydraulic lifters: set clearance at.045 between the cam and the follower (.008-.010 lash). BILLET ROLLER CAMSHAFTS $429.00.580 and.610 lifters. Larger cam likes aluminum heads and is a good choice for strokers. Roller cams require roller springs, taller retainers, roller lash caps and spring pocket machining. 2300 VALVE SPRINGS NEW! CONICAL SPRINGS (FD-H100) For 7mm valve kit.......each $16.75 HYDRAULIC/SOLID SPRINGS (#FD-109).......... each 7.50 ROLLER VALVE SPRINGS (#FD-110X)........ each 11.50 Roller springs require spring pocket machining and +.050 retainers (#FD-114P). CAM FOLLOWERS FOLLOWERS with WEAR PAD (#66993)................. set $147.39 ROLLER FOLLOWERS (#FD-105R).............. each $30.50 SOLID CAM CONVERSION KIT (#FD-116L).......... $175.00 Includes press-in inserts that require no set screws. Features longer billet ball studs and nuts with clips and mouse trap springs. BOSS INSERTS (#FD-117)......................... $7.00 ea. BILLET ADJUSTERS/LONG (#FD-107L)............. 5.75 ea. BILLET JAMB NUTS (#FD-117)).................... 3.85 ea. MOUSE TRAP SPRINGS (#FD-115S)............... 3.90 ea. CLIPS (#FD-115C).................................. 3.75 ea. STAINLESS STEEL VALVES.............$14.50 ea. Severe duty stainless steel. Solid cam valves have longer tip length to simplify geometry setup HYDRAULIC & ROLLER VALVES 1.500 exhaust (FD-6610) 1.590 exhaust (FD-6222) 1.740 intake (FD-6609) 1.890 intake (FD-6621) 2300 SOLID VALVES 1.500 exhaust (FD-6632) 1.600 exhaust (FD-6614) 1.740 intake (FD-6611) 1.890 intake (FD-6612) NEW! 7mm X-LIGHT VALVES... $22.00 See page 8 for additional information ANTI PUMP-UP HYDRAULIC LIFTER (#FD-106N).................... $9.00 For high RPM applications; won t come apart like stock lifters. VALVE HARDWARE VALVE LOCKS/SINGLE GROOVE (#FD-113P)......... $18.00 RETAINERS/SINGLE GROOVE (#FD-114)............... 36.00 RETAINERS/ROLLER CAM (#FD-114P)................. 45.00 LASH CAPS/SOLID CAM (#FD-132)................... 60.30 Run stock length valves with solid cams. +.100 thickness requires you cut valve tips approximately.030. LASH CAPS/ROLLER CAM (#FD-132R)................ 11.00 Use with stock length hydraulic valves. 12 www.raceeng.com 561-533-5500 SALES sales@raceeng.com 561-533-0151 FAX

2300 ESSENTIAL POWER PARTS Exclusive Race Engineering Products L/W BILLET AUXILIARY SHAFT (FD-320)...... $279.00 New design features ARP 12-pt bolts to retain the distributor drive gear and pulley. No tru-arcs to work loose. Replacement parts in stock. A NEW BILLET RETAINING PLATE INCLUDED! PRO DISTRIBUTOR & COIL Stock appearance with no external boxes required. Trued and bushed with locked-out advance. Phasing corrected and simplified wiring system. NO BLACK BOXES REQUIRED! Billet shaft installed. Includes new coil, wiring to coil and bronze gear. TALL CAP SYSTEM (FD-180).................. $339.00 SHORT CAP SYSTEM (FD-181)................. 335.00 Required for aluminum intake. Hi-Performance WATER PUMPS Each pump is hand assembled. Case resists cracking. High efficiency impeller reduces power requirements, while improving flow. HIGH PERFORMANCE PUMP (FD-150)........ $52.50 ALUMINUM PUMP (BE-2303).................... 139.00 ALUMINUM PUMP/PRO (BE-2304).............. 209.00 Features 7 vane impeller for twice the flow and pressure. HIGH VOLUME 2300 FUEL PUMP(FM-M60565).......... $139.35 75 GPH @ 5000 RPM 90-100 GPH @ 7000 RPM BRONZE DISTRIBUTOR GEAR (FD-156B)................ $58.00 Precision machined gear. Oversize roll pin included. A must for any serious race engine! Ultralight ALUMINUM WATER PUMP PULLEY(FD-125)............. $85.00 Machined, hardcoat billet aluminum. Say goodbye to bent junkyard parts! LOWER POWER PULLEY Single belt design eliminates powerrobbing 2nd (useless!) belt. Reduces water pump speed for increased power. LOWER POWER PULLEY (FD-127)........... $69.00 SHORT WATER PUMP BELT (FD-124)......... $13.00 BILLET TIMING POINTER (FD-126S)........ $19.00 Works with our lower pulley shown above. Body can be rotated to simplify plumbing. Alcohol compatible - flush after use. MELLING OIL PUMPS While the hi-volume pump is in stock, we recommend the M86E turbo version (included with our short blocks). It improves oil pressure and requires less power to operate. HI-VOLUME PUMPS (M86CHV).................. $77.87 TURBO PUMPS (M86E)........................... 70.50 C-LINE OIL PANS FRONT SUMP PAN (CL-1032)... $425.00 REAR SUMP PAN (CL-1035)...... 425.00 REPLACEMENT PICKUP.......... 79.00 TECH NOTE: Verify pickup is 3/8-1/2 off bottom of pan. Washers or a rubber mallet should do it. PAN EVACUATION KIT (FD-65050)..... $39.00 Draws vacuum from header or exhaust for additional oil control. Pickup Included MAIN STRAP KIT(FD-140)........ $175.00 Highly recommended with strokers or high RPM applications. Strengthens stock main caps. Minor cap modification required. ARP studs included. TECH NOTE: Strap installation could affect clearance on already machined blocks, requiring another align hone. Check housing bores after installation. Always machine new blocks with main caps and straps installed. OIL RESTRICTOR (FD-143).......... $16.00 Restricts oil to head and improves bottom end oiling. TECH NOTE: Install small end in. Make sure cam and valve train is completely broken-in before installation (a race or two should do it). WINDAGE TRAY KIT (FD-300)............ $109.00 Frees up an additional 10HP! Fits front and rear sumps. Not recommended for strokers or strapped blocks. C.O.D.s 561-533-5500 ACCEPTED SE HABLA ESPANOL 13

2300 ESSENTIAL POWER PARTS 2300 GASKETS CORTECO COMPOSITION HEAD GASKET................................... 19.00 1-PC REAR MAIN SEAL.......................... 12.00 2-PC REAR MAIN SEAL.......................... 12.00 OFFSET 1-PC REAR MAIL SEAL................ 17.50 Unique.060 offset keeps seal away from old seal groove. HELPS STOP LEAKS! COMETIC MLS HEAD GASKET...........From 70.05 In stock.027 / 040 / 051 / 060 thickness COMETIC FULL GASKET KIT................ 148.00 All gaskets & seals to complete the engine...head gasket not included. heavy duty! ALUMINUM VALVE COVER............. $185.00 Professionally welded, solid heavy duty construction. Allows custom breather location. PHENOLIC SPACERS and ADAPTERS Keeps fuel cool for added performance! 1 PHENOLIC CARB SPACER............ $35.00 2 spacers may be stacked to achieve 2 height. 1 PHENOLIC ADAPTER.................. 75.00 Install carburetor to superior EFI manifold. 2 PHENOLIC ADAPTER................. 99.00 FLYWHEEL and CLUTCH K ITS 10000 RPM 6.5# BILLET STEEL FLYWHEEL............ $349.00 Fits 2.0 and 2.3 engines, either 7.5 or 8 clutches. Requires flexplate bolts and 1000 RPM throwout bearing (both not included). ARP FLEXPLATE BOLTS.................... ea, 6.00 Required for all 10000 RPM light flywheels and clutch setups CLUTCH/FLYWHEEL ASSEMBLY........... 657.06 Only 12# - 10 or 23 spline. Throwout bearing not included. CLUTCH COVER, 7.5 or 8.5................. 367.08 REPLACEMENT RING GEAR................. 79.00 THROWOUT BEARING - 10/23 SPLINE...... 99.00 CLUTCH DISC - 10/23 SPLINE, 7.5/8.5 for SOLID HUB...................... 129.00 GOLDSTAR CLUTCH/FLYWHEEL KIT.................... $745.00 10 or 23 spline. Includes bolts and throwout bearing. 7.5 METALIC CLUTCH DISC............... 104.95 7.5 CLUTCH COVER......................... 179.00 THROWOUT BEARING........................ 59.00 REPLACEMENT RING GEAR................. 39.35 FASTENERS 2000 HEAD STUDS (151-4201)...$111.99 2300 HEAD STUDS (151-4202)...132.15 2300 UNDERCUT HEAD STUDS (151-4702)...126.40 2300 HEAD STUDS for MILLED HEADS (HSK-2300)...179.00 Our custom kit with shorter studs avoids stacking washers to engage threads. Uses upgraded ARP 2000 studs. DURATEC 2.3 HEAD STUDS (151-4204)...152.85 2300 FLYWHEEL BOLTS...14.62 2000 MAIN STUDS (151-5401)...113.74 2000/2300 ARP FLEXPLATE 2300 MAIN STUDS (151-5402)... 116.06 BOLTS (FD-FPB)... ea. 6.00 Required for all 10000 RPM light flywheels and clutch setups DURATEC 2.3 MAIN STUDS (151-5405)...113.53 2300 ROD BOLTS...49.33 SERPENTINE BELT SYSTEM Low friction system reduces pump speed, eliminates belt guard. Includes pointer. SERPENTINE BELT SYSTEM (FD-175)...................................................$209.00 Late Model POINTER BRACKET................................. $27.50 (FD-176) Install timing pointer on late model small journal block. The Choice of CHAMPIONS! For stock rods. Tapered RING INSTALLER NOW ONLY $22.00 FIREWALL STYLE: 1-1/2 or 1-5/8...................$149.95 UNDER CHASSIS: 1-1/2 or 1-5/8......................159.95 NEW! TRI-Y SYSTEM: 1-1/2 or 1-5/8................349.95 Dramatic increase in power. Firewall style in stock. Under chassis under development! Installs piston into cylinder without ring damage. Several bore sizes available. timing pointer included HEADERS 14 www.raceeng.com 561-533-5500 SALES sales@raceeng.com 561-533-0151 FAX

DOING BUSINESS WITH US... HOURS: In Season (Jan. - Sept.): 8:30 a.m. to 6:00 p.m. E.S.T., Monday through Friday. Off Season (Oct. - Dec.): 8:30 a.m. to 5:30 p.m. E.S.T., Monday through Friday. PHONE ORDERS: Call (561) 533-5500 to place an order, check on an existing order, for prices and technical assistance. Our 24-hour fax number is (561) 533-0151. ALL PHONE ORDERS: Orders for custom made parts and balanced rotating assemblies shall require a minimum 50% deposit and are not returnable for any reason. Unless parts are ordered in writing, phone orders are deemed to be correct as per our salesperson s hand written copy. Your order will be repeated by your salesperson at the time the order is placed so that you then can verify accuracy. PAYMENT: C.O.D. SHIPMENTS: SHIPPING: OVERSEAS and CANADIAN: DROP SHIPS: REFUSED SHIPMENTS: WHEN YOU RECEIVE YOUR ORDER: RETURN AND EXCHANGES: We accept Visa, MasterCard and Discover cards. Shipments can also be sent C.O.D. Prepayment by wire transfer to our bank is acceptable. Orders prepaid by check will be held approximately 2 weeks until funds clear. Orders can be sent C.O.D. only within the continental United States and Puerto Rico. UPS and FedEx do not accept cash. We will give you an exact total so that you can be prepared with certifie d funds. We ship via UPS, FedEx, RPS and all major carriers. Ground and air servic e is available. We will ship per your instructions. All payment methods specified above are accepted, excludeing C.O.D. s. All drop ships (shipments directly from the manufacturer) must be prepaid and are subject to drop ship fee. All refused orders are subject to a 15% restocking charge plus all shipping costs incurred by us. Please check all parts carefully. Look for small items such as piston locks and wrist pins. All claims for incorrect missing, or defective goods must be made within five (5) business days of receipt. Visible damage must be reported within one (1) business day of receipt. We will correct damaged or defective items only. Incorrect items are subject to return policy below. All returns must have an RGA number (Return Goods Authorization) on the outside of the box. Call us at 561-533-5500 if you require an RGA. Inside the box include your name, address and daytime phone number, a copy of your invoice and the reason for the return. Please package the parts so that they will not be damaged during shipment. Returns must be shipped prepaid (no C.O.D. s) and should be insured. Returns must be in new, undamaged, unmodified and resalable condition. So please check all parts before installation, balancing or machining as those cannot be returned for any reason. It is your responsibility to return any part in resalable condition. That includes incorrect items. NO EXCEPTIONS! Opened bearing packages will not be accepted for return. Discontinued items cannot be exchanged or returned for any reason. We will exchange or issue store credit for any parts resalable as new within 30 days of purchase at 100% of purchase price. Exchanges after 30 days are subject to a 15% restocking charge. No exchanges after 60 days from purchase. REFUNDS: IF WE GOOF: WARRANTY: All items returned for refund must meet our return and exchange policy and will be subject to a minimum 15% restocking charge. No refunds after 30 days of receipt. Contact us immediately for an RGA number. All returns are subject to the conditions above. Replacements will be sent upon our receipt of the incorrect items. Shipping will be at our expense per the shipping method of the original order. We regret that we cannot be responsible for any expedited service beyond the original shipping method. If replacements are required before parts can be returned, they must be paid for and credit or refund will be issued upon receipt by us of the incorrect goods. Due to the nature of performance applications, the parts in this catalog are sold without any express warranty or any implied warranty of merchantability or fitness for a particular purpose. Race Engineering, Inc. shall not, under any circumstances, be liable for any special, incidental or consequential damages, including, but not limited to, damage, or loss of property or equipment, loss of profits or revenue, cost of purchased or replacement goods, or claims of customers of the purchase, which may arise and/or result from sale, installation or use of these parts. All parts in this catalog are sold for off-road and racing applications only. Installation of these parts may adversely affect the vehicle manufacturerʼs warranty. PRICES AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. RACE ENGINEERING, INC. IS NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS. C.O.D.s 561-533-5500 ACCEPTED SE HABLA ESPANOL 15

V8 and 4 CYL FORD 2602 PARK STREET LAKE WORTH, FLORIDA 33460 561-533-5500