INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS APS SERIES APS-DBV-4FP 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com
A0SR Standard Features Indicator A position indicator with Namur mounting is standard on all pneumatic actuators for mounting accessories. Pinion The hardened alloy steel pinion is precision ground and nickel plated (over 5um) in order to reduce friction, provide maximum wear resistance. 3 Actuator Body The aluminum extrusion is hard anodized (over 30um) to protect against wear and corrosion while reducing piston friction to the absolute minimum. Other options such as Nickel, Ceramic, PTFE, Polyester coated are available. 4 Caps Epoxy coated (over 80um) die cast aluminum end caps provide maximum resistance against potentially corrosive elements. 5 Pistons The precisely-balanced and hard anodized treatment (over 30um) die cast aluminum pistons are fitted with high quality rings and guides. The twin rack and piston design creates a constant torque output on all actuators. 6 Travel Adjustment The standard adjustment is +- 5 o in both the open and closed positions through easily accessible external adjustment bolts. 7 High Performance Springs The high tensile steel springs Epoxy coated for corrosion resistance and longer service. The pre-loaded springs can be safely and rapidly disassembled. 8 Bearings and Guides The highly durable compound material provides high trust stability with minimum friction and long life. 9 O-Rings O-rings provide trouble-free operation at standard temperature ranges. A0SR Specifications Standard Operating Conditions Pressure Ranges...Double Acting - 9 psig ( bar) to 6 psig (8 bar) Spring Return - 44 psig (3 bar) to 6 psig (8 bar) Temp. Ranges...-4 o to 76 o F (- to 8 C) Operating Media...Filtered dry or lubricated air for non-corrosive gas, water or light hydraulic oil. The maximum particle size must not exceed 30 microns. Stroke Adjustment... and with standard adjustment +- 5 o. Lubrication...All moving parts are factory lubricated for the entire life cycle of actuator. Construction...Twin piston rack & pinion actuator design, suitable for indoor & outdoor installation. Connections...Bottom drilling complies with ISO 5/DIN 3337 to match valve. Interface for solenoid valve, shaft top end and top drilling for assembling accessories are in accordance with VDI/ VDE-3845, NAMUR standard. Inspection...Every actuator is hydraulically tested, certified and guaranteed for a minimum of,000,000 cycles. 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com
Parts List A0SR SERIES Item 3 4 5 6 7 8 9 0 3 4 5 6 7 8 9 0 3 4 5 Description Indicator Spring Clip Thrust Washer (Pinion) Thrust Bearing (Pinion) Actuator Body Piston Spring (Cartridge) Cap Seals Cap Bolts Cap Piston Bearing Piston Seal Piston Guide Stroke Bolt Stroke Bolt Retaining Nut Stroke Bolt Washer Stroke Bolt O-Ring O-Ring (Top Pinion) Bearing (Top Pinion) Thrust Bearing (Pinion) Stroke Cam Pinion Bearing (Lower Pinion) O-Ring (Lower Pinion) Plug Material Plastic Extruded Aluminum Alloy Die Cast Aluminum Alloy High Performance Spring Steel Die Cast Aluminum Alloy Steel Protection Hard Anodized (over 30um) Hard Anodized (over 30um) Epoxy Coated Epoxy Coated (over 80um) Nickel Plated (over 5um) Qty 8 or 0 8 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com
Operating Principles SPRING RETURN CCW Counter-Clockwise CW Clockwise Air to port A forces the pistons outward, causing the springs to compress. The pinion turns counter-clockwise while air is being exhausted through port B. Loss of air pressure through port A allows the stored energy in the springs to force the pistons inward. The pinion turns clockwise while air is being exhausted through port A. MOUNTING VARIATIONS CCW Counter-Clockwise CW Clockwise SPRING ARRANGEMENT 8 Springs Technical Data AIR CONSUMPTION- Air Volume Opening & Closing WEIGHT/ OPENING & CLOSING TIME MODEL A0 SR Air Volume @ opening liter/ (cu. in.) 0.4 (8.54) Air Volume @ closing liter/ (cu. in.) 0.0 (.0) MODEL Screw Stroke adj. for o adj need A0SR /5 turn Opening Time (Sec.) 0.30 Closing Time (Sec.) 0.35 Approximate Weight kg (lbs).8(4.0) TORQUE RATINGS Supply Pressure MODEL A0 SR 40psi SPRING RETURN TORQUE RATINGS IN (in/ lbs) 50psi 60psi 70psi 80psi 90psi 5 7 69 6 4 6 00psi Spring Torque 00 53 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com
Dimensional Data NAMUR /4 NAMUR / NAMUR Units: mm (inches) MODEL A B C D E F G H I N A0* A80* J K L M Air Connection A0 SR 74 88 7 08 36 47 8 80 30 4 6 66 (6.86) (3.46) (.83) (4.5) (.4) (.85) (0.7) (3.5) (.8) (0.55) (8.50) (0.47) F07 F05 M8x3 M6x0 5/6-0UNC /4-0UNC /8 or /4 std. Ordering Information APS - DBV -4FP Air Pump Shut Off Valve D = Pc SS Ball Valve, ISO5 Mount Port Size 6 = 4 = -/ Connection FP = Female Pipe 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com
DBV - Piece Ball Valves FEATURES/ SPECIFICATIONS Piece, Full Ported Design / thru Female NPT ISO5 Direct Mounting Pad 000 psi maximum Anti-Blowout Stem - Weep Hole Adjustable Vee Style Stem Packing Oil, Water, Air and General Chemical Service Temperature Rating: -0 to 35 F, (-5 to 75 o C) DBV-4FP Dimensional Data Units: mm (inches) MATERIALS. Body- ASTM A35 GR. CF8M. Cap- ASTM A35 GR. CF8M 3. Ball- ASTM A35 GR. CF8M 4. Stem- ASTM A76 GR. 36 5. Seat- PTFE 6. Gasket- PTFE 7. Thrust Washer- PTFE 8. Packing- PTFE 9. Gland- 304SS 0. Handle- 304SS. Spring Washer- 304SS. Handle Nut- 304SS 3. Handle Sleeve- Vinyl SIZE / 3/4 -/4 -/ Model D-BV-8FP-V D-BV-FP-V D-BV-6FP-V D-BV-0FP-V D-BV-4FP-V D-BV-3FP-V d 5.0(0.59) 0.0(0.79) 5.0(0.98) 3.0(.6) 38.0(.50) 50.0(.97) L 60 (.36) 70 (.75) 8 (3.3) 96 (3.78) (4.4) 6 (4.96) H 38 (.50) 4.4(.67) 48.5(.9) 54 (.3) 66 (.60) 74 (.9) h 7 (0.8) 9 (0.35) (0.47) (0.47) 6 (0.63) 6 (0.63) S 9 (0.35) 9 (0.35) (0.43) (0.43) 4 (0.55) 4 (0.55) W 36 (.4) 36 (.4) 4 (.65) 4 (.65) 50 (.97) 50 (.97) W ISO5 4 (.65) F03/ F04 4 (.65) F03/ F04 50 (.97) F04/ F05 50 (.97) F04/ F05 70 (.75) F05/ F07 70 (.75) F05/ F07 Wt kg (lb) 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com
PS30M - Pressure Switch STANDARD FEATURES Hydraulic Input - Pneumatic Output Stainless Wetted Parts Anodized Aluminum Body For Pilot Circuits Only CV =.5 5 to 0% Dead Band PS30M-3K-NC OPERATING PRESSURE Air Pressure: 50 psi Hydraulic Pressure: 50-3000 psi Normally Open Normally Closed Dimensional Data Units: mm (inches) PS30M 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com
Parts Identification APS-DBV-4FP A0SR AVNPP PS30M DBV-4FP or DBV-6FP 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com