I N D E X ADJUSTABLE TIPS... 6-6 ACCESSORIES FOR... 6- COUPLERS... 6- FIRE HOSE NOZZLE... 6-... 6-, 6-2, 6-4 HANDGUN ACCESSORIES... 6- (COMPLETE WITH LANCES) Hamilton... 6-4 Hypro Lurmark... 6- Lurmark... 6- Spraying Systems... 6- to 6-, 6-5 to 6-8 HANDGUN KITS... 6-0 HIGH PRESSURE WANDS... 6-8, 6- LANCES... 6-8, 6-2 QUICK COUPLERS... 6- SHUT OFF VALVES... 6-7 TELESCOPING HANDWAND... 6-9 TIPS /8 Female Thread... 6-9 /4 Female Thread... 6- /4 Male Thread... 6- VALVES... 6-7 WANDS (LANCES)... 6-8, 6-2 WESTWARD PARTS HANDGUN KITS... 6-0
6- Spray Gun SPRAYING SYSTEMS NO. AA2L TRIGGER HAND GUN Maximum Pressure 250 Shut-off seat at spray tip end Note: Gun does not include adjustable tip as shown in picture. Order tip separately on page 6-6 77589 AA2L Gunjet only 74000 AA2L-7676-8" Gunjet w/8" extension 7400 AA2L-7676-8" Gunjet w/8" extension 74002 AA2L-7676-24" Gunjet w/24" extension 7400 AA2L-7676-6" Gunjet w/6" extension 74004 AA2L-7676-48" Gunjet w/48" extension Valve needle extends through length of extension REF 7400 CP6054--AL Body, aluminum 2 See kit* Spring, 02 stainless steel 740 CP7480-ZP Spring screw 4 7402 CP749-ALEF Spring stud 5 740 CP859-ZP Trigger guide 6 7404 CP7486-ZP Locknut, steel zinc plated 7 7405 CP607-NP Packing screw 8 See kit* Cup backing, Buna-N 9 7406 CP7892-ZP Key 0 7407 CP6052-NP Inlet body, brass nickel plated A 7408 CP7677-8-SS Stem, stainless steel (for 8" extension) B 7409 CP7677-8-SS Stem, stainless steel (for 8" extension) C 740 CP7677-24-SS Stem, stainless steel (for 24" extension) D 74 CP7677-6-SS Stem, stainless steel (for 6" extension) E 742 CP7677-48-SS Stem, stainless steel (for 48" extension) 2 74 CP7679- Stem guide nut, brass See kit* Stem end, brass 4 744 CP474-TEF Gasket, teflon 5A 745 775-8 Extension, brass (for 8" length) 7420 206-8 Extension assembly, brass (incl. items A, 2,, 4 & 5A) for 8" length REF 5B 746 775-8 Extension, brass (for 8" length) 742 206-8 Extension assembly, brass (incl. items B, 2,, 4 & 5B) for 8 length 5C 747 775-24 Extension, brass (for 24" length) 7422 206-24 Extension assembly, brass (incl. items C, 2,, 4 & 5C) for 24 length 5D 748 775-6 Extension, brass (for 6" length) 742 206-6 Extension assembly, brass (incl. items D, 2,, 4 & 5D) for 6" length 5E 749 775-48 Extension, brass (for 48" length) 7424 206-48 Extension assembly, brass (incl. items E, 2,, 4 & 5E) for 48" length 6 See Kit* Valve seat, teflon 7 Spray tip (specify type & capacity) 8 7220 CP25-NP Cap, brass - nickel plated 9 7427 CP959-INP Trigger guard 20 7428 CP4252-INP Trigger, steel - nickel plated 2 7429 CP808-IZP Rivet (2 required) 22 740 CP9697-INP Pan head screw * 74200 AB2-L-7676 Spare parts kit (items marked *)
6-2 Spray Gun SPRAYING SYSTEMS NO. AA4H TRIGGER HAND GUN Operating Pressure 200 to 800 Available in brass or aluminum Trigger handle control... /2" NPT female inlet connection... for livestock, orchard and nursery spraying... field spot spraying and cleaning of barns and equipment. 74005 AA4H 2" brass gun, /2" NPT inlet 74006 AA4H-AL 2" aluminum gun, /2" NPT inlet 74007 AA4HA 4" brass gun, /2" NPT inlet 74008 AA4HA-AL 4" aluminum gun, /2" NPT inlet BRASS ALUMINUM REF GUN QTY. GUN QTY 7220 CP25 Cap 742 CP25-AL Cap 2 7284 D4 Orifice disc, stainless See kit * Gasket, nylon 4 74 CP0566 Nozzle housing 4 744 CP0566-AL Nozzle housing 5 See kit* Seat plug assy. 6 745 CP057 Guide vane 6 746 CP057-AL Guide vane 7 747 CP694-AL Gasket, aluminum (2 required) 8 748 CP928-46SS Stem, stainless steel 9 749 CP6604 Tubing 9 7440 CP6604-AL Tubing 0 74429 CP6492 Inlet body, brass 0 744 CP6492-AL Inlet body, aluminum See kit* Packing washer, stainless 2 See kit* Packing, leather ( required) 7442 CP927 Packing screw 744 CP927-AL Packing screw 4 7444 CP6599 Locknut 4 7445 CP6599-IZP Locknut 5 7446 CP964-INP Stem nut, steel -N.P. 6 7447 CP6595-SS Trigger stop spring 7 7448 CP799-IZP Washer 8 7449 CP6597-INP Trigger guide 9 7450 CP659-SS Spring stud 20 745 CP6589-IZP Stop adjusting nut 2 7452 CP6594-SS Spring 22 745 CP6588-IZP Spring screw 2 7454 CP6592-02SS Guide washer 24 7455 CP659-2-SS Main spring 25 7456 CP447--AL Handle body 26 7457 CP762-IZP Rivet (2 required) 27 7458 CP6209-INP Trigger 28 7459 CP650-INP Trigger stop 29 7460 CP757-INP Screw, steel 0 746 CP798-INP Trigger guard, steel 7462 7029-AL GHT (F) x /2" NPT (M) inlet adapter w/gasket - brass 7420 AB4-kit Spare parts kit - brass (items marked *) 74202 AB4-AL-kit Spare parts kit - aluminum (items marked *)
6- Hypro Lurmark Hand Gun (Parts Only) LIGHTWEIGHT TRIGGER VALVE AND LANCE REF 2 7444 92-042 Handle 4 7444 92-044 Cap 5 74444 92-049 O-Ring 6 74445 92-055 Hose 7 74446 92-056 Elbow 8 74447 92-058 Cap 9 74448 92-062 Grommet 0 80-2NER 902-47 Fan tip 72645 902-40 Anvil tip 2 74449 9-2 Disc 9-24 Core (see page -27, -28) 4 7445 902-50 Adjustable nozzle Spraying Systems No. AA2 & AA8 Brass or Aluminum Handle rotates 60 to operate spray gun valve from shut-off to maximum flow position. As handle is turned, spray changes from initial cone spray through intermediate cone spray to straight stream. Corrosion and abrasion resistant hardened stainless steel interchangeable orifice discs. Discs may be purchased separately as desired. Standard tips may also be used with these GunJets. 74009 AA2-6 20" brass gun w/ght connection 7400 AA2-AL-6 20" aluminum gun w/ght connection 740 AA8-AL-6 20" aluminum gun w/ /4" NPTF connection 7420 PKAB-2-KIT Repair kit for #2 brass gun 74204 PKAB-2-AL-KIT Repair kit for #2-AL gun 74205 PKAB-8-AL-KIT Repair kit for #8-AL gun 7286 D-6 Disc 742 CP25-AL Cap for gun GunJet No. 2: length 20"... weight /4 lbs., brass, garden hose connection. Also available in aluminum as GunJet No. 2AL, weight lb. GunJet No. 8AL: length 20"... weight lb., aluminum, /4" NPT female pipe connection.
6-4 Hamilton "Junior" Handgun Junior guns are shorter and lighter - easily handled. Ideal for low capacity estate sprayers. #4 disc is standard. 7405 HA400- Brass 8" gun, /4" FPT REF 2 7466 200-007-05 Steel disc See kit* Shut-off gasket 8 See kit* Needle point 9 See kit* Shut-off valve 74467 400-00-0 Stuffing box 2 See kit* Packing ring 4 74469 8500-052-5 Poly handle 5 74470 00-005-0 Packing nut 74220 SPK-00 Repair kit (items marked *) Hamilton "Senior" Handgun Senior guns are the model of the industry; long and rugged - capable of the various demanding agricultural spray chores in and out of the tractor seat. #5 disc is standard. 7406 HA000- Brass 22" gun, /4" GHT 7407 HA00-2 Aluminum 22" gun, /4" GHT REF 7447 000-00-0 Cap 2 74472 000-004-05 Steel disc See kit* Shut-off gasket 4 7447 000-008-0 Nozzle head 5 74474 000-0-0 Barrel 6 74475 000-00-0 Upper valve rod 8 See kit* Needle point 9 See kit* Shut-off valve 0 74477 000-02-0 Worm 2 74479 000-00-0 Stuffing box See kit* Packing ring 7 See kit* Hose gasket 7422 SPK-000 Repair kit (items marked *)
6-5 Spraying Systems No. AA4-AL Handgun Maximum Pressure 800 Heavy Duty Type - Rotating Handle Control Handle rotates 60 to operate spray gun valve from shut-off to maximum flow position. As handle is turned, spray changes from initial cone spray through intermediate cone spray to straight stream. Corrosion and abrasion resistant hardened stainless steel interchangeable orifice discs. Discs may be purchased separately as desired. Standard tips may also be used with these GunJets. 740 AA4-AL-GH 22 /4" aluminum gun w/ght (garden hose thread) connections Spraying Systems No. AA2 & AA2-AL Handgun REF 742 CP25-AL Cap 2 7284 D4 Orifice disc, stainless 2A See kit* Gasket 744 CP0566-AL Housing 4 See kit* Seat plug 5 746 CP057-AL Guide vane 6 See kit* Gasket, aluminum (2 required) 7 746 CP0576-46SS Stem, stainess steel 8 7440 CP6604-AL Tubing 9 7464 CP668-AL Nut, Aluminum 9 7442 CP668 Nut, brass 0 7465 CP6898-ALGHT Inlet body (GHT) 0 7466 CP6898-AL/2 Inlet body ( /4") ** 7467 CP5882-NP Hand grip stud 2 7468 CP588-AL Washer See kit* Packing (4 required) 4 7469 CP58-AL Screw 5** 7470 CP5884-INP Hand grip collar 6** 747 CP5994-NY Hand grip 7** 7472 CP58-AL Hand grip nut 74207 AB4-KIT Repair kit (brass gun) 74206 AB4-AL-KIT Repair kit aluminum gun **Parts necessary to replace handle on older guns. Handle rotates 60 to operate spray gun valve from shut-off to maximum flow position. As handle is turned, spray changes from initial cone spray through intermediate cone spray to straight stream. Corrosion and abrasion resistant hardened stainless steel interchangeable orifice discs. Discs may be purchased separately as desired. Standard tips may also be used with these GunJets. GunJet No. 2: length 24"... weight /2 lbs., brass, garden hose connection. Also available in aluminum as GunJet No. 2AL, /4 lbs. GunJet No. 2A: length 5"... weight 2 /2" lbs., brass, garden hose connection. Also available in aluminum as GunJet No. 2AAL, lb. 7404 AA2-AL 24" aluminum gun w/ght connection 7405 AA2-AAL 5" aluminum gun w/ght connection 7406 AA2 24" brass gun w/ght connection 7407 AA2A 5" brass gun w/ght connection REF 747 CP5804-AL Cap, aluminum 2 7474 CP606-AL Disc adapter, aluminum See kit* Orifice insert gasket 4 7475 AYH-SS-0 Orifice insert, SS 4 7447 AYH-SS-80 Orifice insert,ss 4 7498 AYH-SS-45 Orifice insert,ss 5 See kit* Spring plate, aluminum 6 7476 CP575-SS Spring 7 See kit* Adjusting stem end 8 7477 CP580-AL Spray housing, aluminum 9 See kit* Spring collar, aluminum 0 See kit* Gasket (2 required) See kit* Seat plate, nylon 2 See kit* Guide washer, aluminum 7478 CP584-SS Snap ring 4 7479 CP5796-AL Adjusting stem, aluminum 4 7499 CP5796 Adjusting Stem Brass 5 7480 CP5795-AL Tube, aluminum 6 748 CP5792-GHAL Inlet body, aluminum /4" GHT 7 See kit* Packing, leather 8 7482 CP657-ALEF Packing screw 9 748 CP5794-AL Adjusting sleeve 20 7484 CP585-ICP Washer 2 747 CP5994-NY Hand grip, PVC 22 See kit* Adj. sleeve collar 2 7472 CP58-AL Hand grip nut 24 See kit* Washer, Buna-N 7485 CP5806-BU Gasket for OC tip 74209 AB2-AL Repair parts kit (items marked*)
6-6 Spraying Systems No. AA2H Handgun Maximum Pressure 000 Flow rates to 5 gpm. With comfortable trigger grip. Trigger guard helps prevent accidental discharge. Trigger lock holds trigger in off position. /4" NPT (M) inlet connection. Instant shut-off with valve seat directly behind orifice tip. Use with any standard tip and with low and high pressure extensions. 7408 AA2-H GunJet w/cap less tip REF 7487 CP7890-NP Cap, brass 2 Spray tip (see section ) See kit* Valve seat, teflon 4 See kit* Main stem assembly 5 7407 CP6052-NP Inlet body, brass 6 7406 CP7892-IZP Key, steel 7 See kit* Packing cup, Buna-N 8 7405 CP607-NP Packing screw, brass 9 7488 CP7484-INP Stem nut, steel 0 7489 CP748-INP Trigger guide, steel 7402 CP749-ALEF Spring stud, aluminum 2 7490 CP942-INP Safety lock screw, steel 749 CP9422-AL Safety lock cam, aluminum 4 7492 CP942-I Socket head set screw, steel 5 See kit* Main spring, stainless steel 6 7400 CP6054--AL Body, aluminum 7 7404 CP7486-IZP Lock nut, steel 8 7428 CP4252-INP Trigger, steel 9 7427 CP959-INP Trigger guard, steel 20 7429 CP808-IZP Rivet, steel 2 740 CP9697-INP Pan head screw, steel 74208 AB2H-kit Repair parts kit (items marked *) Adjustable Tip Adjustable ConeJet tips fit standard TeeJet spray nozzle body. The body of the 5500 rotates for spray selection from wide angle cone to straight stream... tip capacities from.02 to.0 gpm at 40. ITEM NO. 726 5500-X5 Adjustable tip (brass) /6" Fe Thread 7264 5500-X8 Adjustable tip (brass) /6" Fe Thread 7266 5500-PPB-X8 Adjustable tip (poly) /6" Fe Thread 75590 5500-X8 Adjustable tip (brass) /4" Fe Thread 2 ITEM NO. 2 7559 8720-PPB-X8 Adjustable tip (poly) /6" Fe Thread Liquid Pressure in psi 20 psi 0 psi 40 psi Setting Setting Setting Tip No. Performance A B A B A B 5500-X5 or 726 Capacity - gpm Spray Angle Max. Throw ft..06 6 2.5.2 -.076 70 2.5.26-4.082 74.0-5 5500-X8 or 7264 7266 Capacity - gpm Spray Angle Max. Throw ft..097 66. - 4.2 7.40-7. 74.47-8
6-7 TeeJet Trigger Adapters No. 46 trigger adapter gives trigger on-off control to rotating handle GunJet spray guns. Heavy duty design weighs only ounces. /4" garden hose inlet and outlet connections to fit GunJet no. 2, 2 and 4AL-GH. For pressures up to 800 psi. Large four-finger trigger for easy trigger control. Trigger lock for continuous spraying. Handle made of aluminum. Buna-N valve seat. 74400 AA46 Trigger adapter 7440 PKAB-46-KIT Trigger adapter repair kit 74402 056-/4 /4" brass adapter 7440 056-/8 /8" brass adapter 74404 056-/2 /2" brass adapter 74405 740-A /4" garden hose swivel, brass MAKES ANY HAND GUN A TRIGGER GUN TeeJet Shutoff Valves and Sprayguns No. 056 Adapter attaches to outlet of No. 46 trigger valve, to convert valve to spray gun. Choice of /4", /8" and /2" NPT female outlet connections for attachment of nozzles or extensions. No. 740A swivel connector is made with /4" garden hose connections to fit all GunJet spray guns with similar inlet connections. Provides free-swivelling, leak-proof connections at pressures up to 800. Quality built, smaller capacity valves and spray guns for dependable, trouble-free performance. Designed for a wide variety of applications such as weed spot spraying, insecticide and pesticide spraying and applying cold water paints. A B C D E F G MAX. MAX. REF IN OUT FLOW PRESSURE WT. A 74406 4688 Trigger valve w/lock /4FPT TeeJet cap 2 gpm 250 5 oz. B 74407 6466 Same as 4688 less trigger /4FPT TeeJet cap 2 gpm 250 5 oz. lock w/extra long handle C 74408 604 Trigger valve w/lock /4FPT /4FPT 2 gpm 250 5 oz. D 74409 6590 Trigger valve less lock /4FPT /4FPT 2 gpm 250 5 oz. E 7440 AA6-/4 Trigger valve w/lock /4FPT /4FPT 7 gpm 50 oz. E 74457 AA6-/8 Trigger valve w/lock /8FPT /8FPT 7 gpm 50 oz. F 744 22 Adapter for 4688 valve with lock /4FGHT /8FPT - - - G 7409 AA Trigger Valve ¼mpt TeeJet Cap 2 oz. Top quality hand valves for use with spray nozzles, extensions and handles to suit your application needs. Hand valve assemblies may be made from parts shown on this page. The typical assembly shown at right includes 4727 handle, 4688 valve, 667-8 curved extension, TeeJet cap and flat spray tip. 667 7427 4727 4727 sure grip handle, brass rubbercovered, /4" NPT (M), hose inlet connection 7428 4754 4754 sure grip handle, brass, rubbercovered, /4" garden hose thread (F) inlet connection 667 Lance see page 6-8 4727 4754
6-8 TeeJet Triggerjet Spray Gun MODEL 22670 The 22670 TriggerJet spray gun kit combines the 22650 TriggerJet spray gun with an extension wand and the items listed in features. Maximum pressure rating is 50 (0 bar). Features: 22650 TriggerJet spray gun with a /4" NPT (F) thread inlet connection Trigger lock permits locking gun in an open position for continuous flow 22665 extension wand with 5" length 8079-50-PP tip strainer 5500-PPB-X8 adjustable ConeJet spray tip CP2267-PP 45 adapter Accepts all standard Spraying Systems Co. spray tips and tip strainers REF 8 74520 CP22676-NEO Gasket, Neoprene 9 7452 CP22659-PP Washer, Polypropylene (Black) 0 74522 CP2266-VI Diaphragm, Viton CP22664-PP 8079-PP-50 5500-PPB-X8 22665-5-PP 22650-PP-/4 TriggerJet EXTENSION INLET PART NO. REPLACES LENGTH CONNECTION 74020 22670-PP-5-/4 5" /4" (F) NPT Spraygun Extensions /4 FNPT Threaded Connection REPLACEMENT PARTS 7498 22650-PP-/4 Complete handle w/trigger 74459 CP2265-/4-PP Handle 7568 CP2265-/8-PP Handle 7499 22665-5-PP 5" lance 7424 22665-24-PP 24" lance 74297 CP22664-PP Adapter 7425 CP2267-PP 45 adapter 50MN 8079-PP-50 Screen 50 mesh 7266 5500-PPB-X8 Adjustable tip poly 7426 PK-AB22670-PP-KIT Includes spring, gasket, diaphragm and O-Rings for 7498 LOW PRESSURE STRAIGHT AND CURVED EXTENSIONS Fits model 2L GunJet spray guns and trigger valves. Designed for use with TeeJet strainers, caps and spray tips. 2 & HIGH PRESSURE CURVED EXTENSIONS Use when spraying pressures will be greater than 250. Fits model 2H GunJet spray guns. Body designed for use with TeeJet strainers, caps and spray tips. Fixed position body, brass constructed with rubber covered handle (except in 8" length). Warning: Do not use at pressure higher than those specified for valve or spray gun. 4 REPLACEMENT PARTS REF Maximum Pressure 250 745 775-8 8" straight with fixed body 746 775-8 8" straight with fixed body 747 775-24 24" straight with fixed body 7425 775-0 0" straight with fixed body 748 775-6 6" straight with fixed body 749 775-48 48" straight with fixed body Maximum Pressure 25 2 7442 467-8 8" curved with swivel body 2 744 467-8 8" curved with swivel body 2 7444 467-24 24" curved with swivel body 2 7445 467-0 0" curved with swivel body 2 7446 467-6 6" curved with swivel body 2 7447 467-48 48" curved with swivel body Maximum Pressure 25 7448 667-8 8" curved with fixed body 7449 667-8 8'"curved with fixed body 74420 667-24 24" curved with fixed body 7442 667-0 0" curved with fixed body 74422 667-6 6" curved with fixed body 7442 667-48 48" curved with fixed body Maximum Pressure 000 4 74424 9527-8 8" curved high pressure 4 74425 9527-8 8" curved high pressure 4 74426 9527-24 24" curved high pressure 4 74427 9527-6 6" curved high pressure 4 74428 9527-48 48" curved high pressure
6-9 Telescoping Handwand The new Gun-Action Telescoping Handwand! This wand will be an asset for any sprayer! Adjusts from 2" to 5" in just a twist of the wrist. You can now reach those taller trees, go deeper in those tight corners, under decks & patios. The spray tip is also adjustable from a full cone spray to a straight stream. Quick release Trigger lock. Weight is less than /2 lb. Aluminum Telescoping Pipe 0.5-0.2 GPM at 40 Will interchange with any flat screen tip /8" hose barb standard PART NO. 7580 /8 DT Tips for Wands Part numbers listed are with 40 spray angle. Also available in 5, 25, 50, 65, 80 and 95 spray angles. Brass nozzles and solid stream nozzles are also available in all capacity sizes shown. GPM AT BASED ON WATER 40 00 200 00 400 500 600 700 800 000 PART NO. REPLACES MATERIAL 72628 H-/8DTSS 40-04 Stainless steel.40.6.89...4.6.7.8 2.0 72629 H-/8DTSS 40-06 Stainless steel.60.95..6.9 2. 2. 2.5 2.7.0 7260 H-/8DTSS 40-09 Stainless steel.90.4 2.0 2.5 2.9.2.5.8 4.0 4.5 7262 H-/8DTSS 65-09 Stainless steel.90.4 2.0 2.5 2.9.2.5.8 4.0 4.5 High Pressure Wand Pressure molded handle Continuous /8" steel barrel 74485 527406 8" galvanized wand
6-0 WP Handgun Kits SPW WP00 Handgun kit with Spraying Systems pistol grip handgun, shutoff valve, /8 x 25 hose assembly. To be used on sprayers not plumbed for handguns. Note: For parts breakdown see Section 9 SPW WP02 Handgun kit with Hamilton twist adjust handgun, shutoff valve, /8" x 25' hose assembly. To be used on sprayers not plumbed for handguns. Note: For parts breakdown see Section 9 SPW WP0 Handgun kit with Spraying Systems polypropylene, /4" x 2- /2' hose assembly. Economy handgun, can be used on all WP estate sprayers. Note: For parts breakdown see Section 9 SPW WP08 Handgun kit with pistol grip handgun, gun and hose holder, /8" x 25' hose assembly. Used on WP40 and WP6240 and other point sprayers Note: For parts breakdown see Section 9 SPW WP04 Handgun kit with pistol grip handgun, gun holder, /8" x 2- /2' hose assembly. Can be used on all WP estate Sprayers. Note: For parts breakdown see Section 9
6- Accessories for Guns REF A 749 990-0 /4" NPT x /4" NPT female brass swivel B HYD0207-4x4 5000 Connector /4" NPT x /4" NPT female (does not swivel after tight) C 7494 AA20- Quick change MultiJet nozzle () 2 gpm tips () injection tip C 7495 AA20- Quick change MultiJet nozzle () gpm tips () injection tip D 74490 50257 Extended range handgun nozzle assembly. (increases range 5 feet at 50 psig with 45 angle to the ground) Replaces standard orifice disc on end of handgun 7449 50288 Same as 74490 less adapter, less disc 74492 202-2 Same as 7449 less Venturi cover A C D B Fire Hose Nozzle (Red Plastic) PART NO. DESCRIPTION X THREAD 760 /2" nozzle NPSH 75789 2" nozzle NPSH 75790 " nozzle NPSH 7579 ¾" nozzle GHT HOSE BARBS SEE PAGE 5-20 & 5-28 2 Complete assemblies of gun and wands with quick disconnect couplers. (#788 ¼ Female Coupler and #7825 /8 Male Coupler) PART NO. LENGTH WEIGHT DESCRIPTION 75205 6".24 lbs. with 78084 gun 75209 6".08 lbs. with 78082 gun 7529 47" 4.6 lbs. with 78082 gun 75222 59" 4.64 lbs. with 78082 gun 7522 79" 5.20 lbs. with 78082 gun
6-2 High Pressure Wands ST 00 LANCES Pressure: 4000 Flow Rate: 2 US gpm Temperature: 00 F SCH 80 Aluminum /4" MPT both ends PART NO. SIZE SPP 78074 8" SPP 78075 24" SPP 78076 6" SPP 78077 47" SPP 75007 59" SPP 7502 72" SPP 750 79" ST 54 DOUBLE-LANCE Pressure: 000 Flow Rate: 2 gpm Temperature: 00 F Less Tips PART NO SPP 7802 ST 2500 Easy trigger operation and light to hold Pressure: 4000 Flow Rate: 2 gpm Temperature: 00 F Weight: 9 oz. /8" FPT inlet PART NO /4" FPT outlet SPP 78084 REPAIR KIT SPP 7828 ST 80 Pressure: 250 PART NO Flow Rate: 7 gpm SPP 7805 Temperature: 20 F Weight: 9 oz. REPAIR KIT /8" FPT inlet SPP 7829 /4" FPT outlet Fits Westward Pressure Washers (except 0) MTM LOW PRESSURE SPRAY GUN Max Pressure: 50 Max Flow Rate: 26 US gpm Max Temperature: 200 F ½" FNPT inlet Garden Hose Spray outlet PART NO SPP 75048 ST 007 LANCES WITH MOLDED GRIPS Pressure: 4000 Flow Rate: 2 US gpm Temperature: 00 F Plated Steel /4" MPT both ends PART NO. SIZE SPP 78078 8" SPP 78079 24" SPP 78080 6" SPP 7808 47" SPP 7429 59" SPP 74224 79" LANCE HANDLE Fits on any standard pressure washer lance for extra hold. PART NO SPP 75204 ST 000 GUN HANDLE Open Flow Design with no trigger Pressure: 4000 maximum Flow Rate: 2 gpm maximum Temperature: 00 F /8" FPT inlet /4" FPT outlet PART NO SPP 78082 ST 500 GUN Pressure: 4000 Flow Rate: 7 gpm Temperature: 00 F /8" FPT inlet /4" FPT outlet Fits Westward 0Pressure Washers PART NO SPP 7808 REPAIR KIT SPP 7827 PA VEGA SPRAY GUN Max Pressure: 5000 Max Flow: 8 gpm Temperature: 00 F /8" FNPT inlet /4" FNPT outlet PART NO SPP 75045
6-25 Spray Tips ¼" Male and Female Pipe Thread Tips/Nozzles Nozzles restrict water flow sufficiently to develop the required pressure. Nozzle size therefore influences the pressure and flow rate. Nozzles also break the liquid flow into optimum sized droplets, form the spray pattern and propel the droplets in the proper direction. Note: Flow through an orifice will gradually make the hole bigger resulting in lower pressure. Frequently users will complain that their high pressure cleaner does not perform as well as before when in fact all it requires is the correct size nozzle NOZZLE VOLUME (GPM) AT VARIOUS PRESSURES () Female Part No. Male Part No. Nozzle Size Orifice Dia. (in) 40 00 250 500 600 700 800 000 200 500 2000 2500 000 500 4000 78892 7809 4. 0 0.052 0.40 0.6. 0. 4. 6. 7. 8 2. 0 2. 2 2. 5 2. 8.. 5. 8 4. 0 78889 780 4. 5 0.055 0.45 0.7.. 5. 7. 9 2. 0 2. 2 2. 4 2. 8. 0. 6. 9 4. 4. 5 7889 78 5. 0 0.057 0.50 0.79.. 8. 9 2. 2. 2 2. 5 2. 8.. 6 4. 0 4. 4 4. 7 5. 0 78894 782 5. 5 0.060 0.55 0.87. 4. 9 2. 2. 2. 5 2. 8. 0. 4. 8 4. 4 4. 8 5. 2 5. 5 78895 78 6. 0 0.062 0.60 0.95. 5 2. 2. 2. 5 2. 7. 0. 2. 7 4. 2 4. 8 5. 2 5. 6 6. 0 78896 784 6. 5 0.064 0.65.00. 7 2. 2. 5 2. 7 2. 9.. 6 4. 0 4. 6 5. 2 5. 7 6. 0 6. 5 78897 785 7. 0 0.067 0.70.0. 8 2. 5 2. 7 2. 9.. 5. 8 4. 5. 0 5. 6 6. 6. 6 7. 0 78898 786 7. 5 0.070 0.75.20. 9 2. 7 2. 9. 2. 4. 8 4. 4. 6 5. 6. 0 6. 5 7. 0 7. 5 78899 787 8. 0 0.072 0.80.0 2. 0 2. 8.. 4. 6 4. 0 4. 4 5. 0 5. 6 6. 2 7. 0 7. 5 8. 0 * A commonly used standard for nozzle size is the nozzle number which is equivalent to the nozzle capacity in GPM at 4000. Spray angle does not affect nozzle volume Brass Wand Couplers and Plugs FEMALE COUPLER X MPT FEMALE SOCKET FEMALE PLUG MALE PLUG /4 NPT /8 NPT /2 NPT 74226 74227 7459 788 789 7820 782 7822 782 7824 7825 7826 PART NO. SIZE DESCRIPTION 78029 ¼" Stainless-Steel Plug 7807 ¼" Brass w/stainless Sleeve Coupler Longer body for greater strength. FEMALE PIPE CONNECTOR PART NO. PIPE THREAD (STEEL) T T2 HYD 0202-4X4 /4 x 8 /4 x 8 T T2 O-RINGS FOR FEMALE COUPLERS PART NO. DESCRIPTION 74228 ¼" O-Ring 74229 /8" O-Ring 7422 ½" O-Ring
6-4 Complete Handguns Standard turbine spray gun. Adjustable from cone to stream spray. At 850 with #2. nozzle straight stream range is 45'. 2" (550 mm) long. PART NO. DESCRIPTION 75487 Gun 74590 Repair parts kit Long range spray gun. Adjustable from cone to stream spray. At 850 with #4.5 nozzle straight stream range is 62'. 25" (640 mm) long. PART NO. DESCRIPTION 75488 Gun 74590 Repair parts kit Complete with spraying systems end adapter, brass cap, orifice and garden hose adapter. 2" lance D6 orifice Max - 750 lbs. PART NO. DESCRIPTION 7857 Handgun 7862 Repair kit Complete with spraying systems end adapter, brass cap, orifice and garden hose adapter. 24" lance D6 orifice Max - 750 lbs. PART NO. DESCRIPTION 7858 Hand gun 7862 Repair kit LONG HAND WANDS SEE SECTION 7