arrying capacities: 0 up to 0 t Air pressure: or Proven in practice: JN Air Hoists PROFI Series are superior in all places where safety has priority. Unlike electric current, the copressed air power driving ediu does not produce any ignition risk. This iportant advantage ensures JN Air Hoists are especially suitable for applications in hazardous areas. JN Air Hoists PROFI Series are very robust and therefore suitable for tough industrial applications even in continuous working processes. According to your requireents there are various control systes available. For traversing loads there are also different trolley designs to eet your particular deands. Where the JN PROFI excellence has been proven Aircra construction, assebly lines, cheical industry, dairies, electro plating, explosives and pyrotechnics industry, food industry, foundries, furniture industry, glass industry, lacquer and varnish factories, atch industry, echanical engineering, auto industry, oil storage plants, on- and offshore, paint shops, paper industry, power plants, refineries, sawills, shipyards, space industry, tepering plants, textile industry. STANAR FEATURES Suitable for application in hazardous areas Sensitive infinitely variable speed control for the precise positioning of loads Easy operation Suitable for lube-free operation Frequent switching and extended duty cycles Low aintenance Low headroo, lightweight Sound absorption Insensitive to dust, huidity and teperatures ranging fro -0 up to +70 Fro t upwards with overload protection (E-version) Low sound eissions TEHNIAL ETAILS Fail-safe starting, low aintenance vane otor hain sprocket in the id section runs in dust-proof aintenance-free ball bearings Planetary gear box with long-life grease lubrication, all gears ade of tepered or hardened high-grade steel Load chain and hooks anufactured fro high quality tepered steels with a breaking strength of five ties the noinal load THE AVANTAGES AT A GLANE Strong Fast Silent High perforance with ore efficiency by reliability plus high liing and lowering speeds. Low sound eissions. High Level of Safety Integrated eergency stop switch in the ain air supply*. Fro t upwards with overload protection. Oil-Free Operation Patented, peranent otor lubrication during operation, using a high-perforance grease. No additional otor lubrication required. Patented Motor-rake Syste For operation with low aintenance and little wear. ased on the proven design of the JN Mini Series. Modern esign opact Size Features no protruding control hoses or parts susceptible to daage, aking the new PROFI also suitable for horizontal pulling. 0 % uty Rating No owntie Suited For Application In Hazardous Areas According to E irective on Hazardous Locations 9/9/EE As standard: II G IIA T(X) / II G II T(X) With increased spark protection: II G II T(X) *Up to PROFI 0 TI
The odular syste at a glance Liit Switch for Trolley Travel Extension Ar for ontrol Trolleys Manual Trolley Reel hain Trolley Motor Trolley Special High Perforance Grease for oil-free operation Housing Finish Standard JN Green -coat offshore paint syste Nickel plated Service Unit Filter Regulator Filter Silencer hain ontainer hain ox hain ag Hook Standard opper-plated Stainless Steel Supply Spiral Hose Energy hain -rail Square ar Liit Switch for Li ontrols Rope ontrol FI ontrol (sensitive) E ontrol (single speed) F ontrol (ulti-function) Reote ontrol Electropneuatic Interface Ex lassification Standard: II G IIA T(X) / II G II T(X) With increased spark protection: II G II T(X) With increased spark protection for explosion group II: II G II T(X)
PROFI 0 TI - TI TEHNIAL ATA 0 TI 0 TI TI. TI TI Air pressure arrying capacity Nuber of chain strands Liing speed at full load Liing speed without load Air consuption at full load - liing Air consuption at full load - lowering Hose diension (ø inside) Weight with standard li height hain diension Weight of chain Standard li Lenght of control at standard li Noise level at full load - liing Noise level at full load - lowering t /in /in 0. 0. 7..7 8. 7. 0.7 8 G / 9. 7 7 x. 7.8... 7 0. 0..8.7 8. 7.8 7 G / 9. 7 7 x... 9... 7 0. 0...8.8.7 8.. 7. 7 G / 7 x. 8......7 8 7 - -.. - 7. -.8 8. - - 9.7 -. - 9. - - 9. -. - 7. -. G / 9 9 x 7..8 7 - -. 0. 8.....7 8. 7 G / 7 7 x. 8.9.7 8 8... 7 PROFI TI Group echanis at : PROFI 0TI M (), PROFI 0TI - PROFI TI M (A) With overload protection Measured at distance acc. to IN part 0 IMENSIONS 0 TI 0 TI TI. TI TI A in. headroo E E G axiu width 7.7 0. 88.7.7 97 8 8. 7.9 7 7.7 0. 88.7.7 97 8 8. 7.9 7 7.7 0. 88.7.7 97 8 8. 7.9 7 8.9. 9 00. 8.0.7 70 8. 9. 98..7.7 97 8 8. 7 7. 8 hain containers increase the hoist headroo
PROFI. TI and TI / NEW TEHNIAL ATA. TI TI/ Air pressure range apacity Nuber of chain standards Liing speed without load Liing speed at full load Air consuption at full load liing Air consuption at full load lowering Hose diension (Ø inside) Weight with standard li height hain diension Weight of chain Standard li Lenght of control at standard li Noise level at full load - liing Noise level at full load - lowering t /in /in / / - -.. - 7. -.8 8. - - 9.7 -. - 9. - - 9. -. - 7. -. G / 9 9 x 7..8 7 - - - -.. -.8 -.. -. - 9.8-8.0-9.7 - - 9. -. - 7. -. G / 9 9 x 7..8 7 - - PROFI. TI PROFI TI/ Air pressure range: Measured at distance acc. to IN part 0 IMENSIONS A in. headroo E E G axiu width. TI 8.9. 9 00. 8.0.7 70 8. TI/..0 00. 8 8 0 8. F G A E E hain containers increase the hoist headroo 7
PROFI TI - 0 TI TEHNIAL ATA TI/ TI TI TI TI 0 TI Air pressure apacity Nuber of chain standards Liing speed without load Liing speed at full load Air consuption at full load liing Air consuption at full load lowering Hose diension (Ø inside) Weight with standard li height hain diension Weight of chain Standard li Lenght of control at standard li Noise level at full load - liing Noise level at full load - lowering t /in /in / / - -.. -.8 -.. -. - 9.8-8.0-9.7 - - 9. -. - 7. -. G / 9 9 x 7..8 7 - -.8 9.7 8... 7. 7. 7...8...8 9 G / 9 89. 8 x..8.8 9.8.9..8. 7. 7... 8.. 7.7. 9 G / 9. x..8.8.. 8.. 7. 7....... 9 G / 9.9 x.9.8.8..... 7.....9. 9 G / 9 9. 0 x.9.8 7.8.. 0..9. 7. 7 0...... 9 G / 9 7 x.9.8 PROFI TI Group echanis at : M () Measured at distance acc. to IN part 0 IMENSIONS A in. headroo E E G axiu width TI/..0 00. 8 8 0 8. TI. 9.7 7 9. 9 8. 0. 0 7. 87 9. TI 7 9. 9 8. 0. 0. 9. TI 8. 8 08. 7.7.7 7.8 97 0 TI. 898. 98 8 7. 9.. 7.8 99 08 0 TI 0. 0. 70 8 7. 9 7 7 7.. hain containers increase the hoist headroo 8
PROFI TI - 0 TI TEHNIAL ATA TI 7 TI 0 TI 0 TI Air pressure apacity Nuber of chain standards Liing speed without load Liing speed at full load Air consuption at full load - liing Air consuption at full load - lowering Hose diension (Ø inside) Weight with standard li height hain diension Weight of (.8 ) chain Standard li Lenght of control at standard li Noise level at full load - liing Noise level at full load - lowering t /in /in / / 7.....9 9.8 0 G.0 98 98. x 8.. 8 8. 0...0..7 9.8 7.....9. 9.8 0 G.0 9 8. x 8.. 8 8. 0..9 0.9..7 98.. 0.. 0.9.. 9.8 0 G.0 8. x 8.. 8 8 0. 0.. 89..9 G /. 0 x 90.. 88 89 PROFI 0 TI Group echanis at : PROFI TI - PROFI 0TI M (), PROFI 0TI M () Versions with for PROFI TI and PROFI 0TI on request. Measured at distance acc. to IN part 0 IMENSIONS A in. headroo E E G axiu width hain containers increase the hoist headroo TI 7 TI 0 TI 9. 0. 87.8 8.9 7.9 7. 8 9. 88. 00. 89.8 8.0.0 0. 8 9. 7 7 700 8. 8. 9.... 9 0 TI 8. 00 8. 7 8.9 7 9. 0.7.7 7. 0 0. 9