HEAVY-DUTY CATALOG FL-6-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES
TABLE OF CONTENTS CYLINDER FEATURES DOUBLE-ACTING Series T, TS, TL and TLS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC SWITCH DOUBLE-ACTING Series TM and TSM MAGNETIC SWITCH DOUBLE-ACTING DOUBLE-ENDED Series TMDE and TSMDE AL DATA NFPA MXO (Without Mounts) 6 MOUNTING STYLES MOUNTING STYLES 8 MOUNTING STYLES ROD END STYLES ACCESSORIES 0 MAGNETIC SWITCH OPTIONS Series TM, TSM, TMDE and TSMDE ENGINEERING DATA 2 FLUID POWER FORMULAS 2 ROD DIAMETER SELECTION STOP TUBE SELECTION SPECIAL OPTIONS 4 ORDERING INSTRUCTIONS FLAIRLINE HEAVY-DUTY A FLAIR FOR RELIABILITY, AVAILABILITY, ECONOMY AND SERVICE Flairline Means Value You can select Flairline products with confidence. They are expertly designed, made of the finest materials available, and carefully assembled. Our design specifications are precisely held during manufacture, and every individual product must pass stringent functional tests before they are considered customer ready. After testing is completed, Flairline/Fast shipping assures that Flairline products are shipped to our distributors or directly to the customers within three to five working days. Flairline understands that availability is important. So is price. Flairline products are surprisingly inexpensive, rapidly repaying your low initial investment with trouble-free operation. Quality design and easy repairability enhance production and add value to your equipment. Should Flairline products need service, we provide that too. Our interest in your complete satisfaction doesn t end after the sale. With repair kits and parts, Flairline is prepared to handle any emergency and minimize downtime. Make your selections with complete confidence from our extensive line of low cost, fast-action pneumatic or hydraulic actuators. Special Products Flairline standard products offer a wide variety of application capabilities. No matter how extensive a product line may be, there is often a need for something unique for your special application. Responding to this need is important to Flairline. We are pleased to offer our capabilities to manufacture pneumatic and hydraulic actuators to your specifications. Contact your local Flairline distributor for more information. CAD Files CAD product drawings are available in all formats for use with this catalog. These drawings can also be downloaded from our Web site at www.flairline.com 2
CYLINDER FEATURES 2 4 6 8 0 2 4. Chrome plated, high strength, steel PISTON ROD is corrosion resistant, rugged and durable. 2. Urethane, double lip ROD WIPER aggressively wipes contaminants from rod protecting rod seal and cylinder.. 660 bronze ROD BEARING provides maximum rod support and low friction for normal to high-load conditions. Lube reservoir allows longer bearing and seal life without maintenance. 4. HEAD and CAP are machined, aluminum precision blocks for accurate mounting surfaces. Black anodized for corrosion resistance.. Steel RETAINING RING for strength, coated for corrosion resistance, allows easy removal of rod bearing and seals without disassembly of cylinder. 6. Pressure-energized, wear compensating, U-cup ROD SEAL provides positive sealing.. BARREL SEALS offer O-ring design for positive sealing. 8. Floating CUSHION SEAL check valve offers fast break-a-way, selfaligning, positive cushioning for faster cycle time and reduced cylinder wear.. N.P.T.F. PORTS standard. 0. TIE RODS are pre-stressed, high strength steel for maximum fatigue capacity and have rolled threads for added strength. Black oxide finish provides corrosion resistance.. Precision-drawn, light weight aluminum BARREL is hard anodized inside and out for corrosion and abrasion resistance. Fine I.D. micro-finish provides long life and positive sealing. 2. Aluminum PISTON is threaded to rod, permanently locked with aerobic adhesive and secured with lock nut. Optional magnet is installed under wear ring.. Specially formulated Acetal WEAR RING increases cylinder life by eliminating metal to metal contact. 4. Pressure-energized, wear compensating, U-cup PISTON SEALS provide positive sealing.. Adjustable CUSHION NEEDLES have fine thread metering, are captive and flush (cushions not available on head-end of bore cylinders with oversize rods).
DOUBLE-ACTING SERIES T, TS, TL AND TLS Flairline double-acting NFPA cylinders can be used in nearly all types of applications where economical, long-service actuators are required. Operating systems can be pneumatic or hydraulic. Precision components and sealing elements permit continuous operation in almost all environments. SERIES TS FEATURES OVERSIZED RODS. See page 6 for dimensional data; pages, 8 and for mounting styles; page for rod end styles; and page 0 for accessories. For special options, see page 4. For ordering information, see page. T TYPE PISTON T/TS Standard Bore Sizes to 8 Stock Stroke Sizes to 8 ( increments) Cushions available either/both ends Pneumatic 20 psi. max. Hydraulic 400 psi. max. (non-shock) Pressure energized, wear compensating, U-cup piston seals (Buna N standard; Viton available). A specially formulated acetal wear ring prevents metal to metal contact. TL/TLS Flairline double acting cylinders can also be supplied with low running friction characteristics. They are built following NFPA standards and incorporate a custom piston and special seal configuration. Series TLS features oversized rods. DOUBLE-ACTING DOUBLE-ENDED SERIES TDE AND TSDE Flairline double-acting double-ended NFPA cylinders feature piston rod extensions from each end and include Flairline T type pistons. As one end is extended, the opposite end is retracted. Working range (stroke), force and speed are equal in both directions so work can be accomplished at both ends simultaneously. SERIES TSDE FEATURES OVERSIZED RODS. See page 6 for dimensional data; pages, 8 and for mounting styles; page for rod end styles; and page 0 for accessories. For special options, see page 4. For ordering information, see page. TDE/TSDE Standard Bore Sizes to 8 Stock Stroke Sizes to 8 ( increments) Cushions available either/both ends Pneumatic 20 psi. max. Hydraulic 400 psi. max. (non-shock) 4
MAGNETIC SWITCH DOUBLE-ACTING SERIES TM AND TSM Flairline magnetic switch double-acting NFPA cylinders include TM type pistons with factory installed magnets for automated stroke sequencing. Magnetic switch options include Reed and Hall effect types. Tie rod mounted brackets can be adjusted to any location on the cylinder allowing several switches to be mounted for controlling or initiating any sequence function. SERIES TSM FEATURES OVERSIZED RODS. See page 6 for dimensional data; pages, 8 and for mounting styles; page for rod end styles; and page 0 for accessories. For Magnetic Switch options, see page ; for special options, see page 4. For ordering information, see page. TM TYPE PISTON TM/TSM Standard Bore Sizes to 8 Stock Stroke Sizes to 8 ( increments) Cushions available either/both ends Pneumatic 20 psi. max. Hydraulic 400 psi. max. (non-shock) Pressure energized, wear compensating, U-cup piston seals (Buna N standard; Viton available), piston includes magnet. A specially formulated acetal wear ring prevents metal to metal contact. MAGNETIC SWITCH DOUBLE-ACTING DOUBLE-ENDED SERIES TMDE AND TSMDE Flairline magnetic switch double-acting double-ended NFPA cylinders feature piston rod extensions from each end. As one end is extended, the opposite end is retracted. Working range (stroke), force and speed are equal in both directions so work can be accomplished at both ends simultaneously. Included are Flairline TM type pistons with factory installed magnets for automated stroke sequencing. Magnetic switch options include Reed and Hall effect types. Tie rod mounted brackets can be adjusted to any location on the cylinder allowing several switches to be mounted for controlling or initiating any sequence function. SERIES TSMDE FEATURES OVERSIZED RODS. See page 6 for dimensional data; pages, 8 and for mounting styles; page for rod end styles; and page 0 for accessories. For Magnetic Switch options, see page ; for special options, see page 4. For ordering information, see page. TMDE/TSMDE Standard Bore Sizes to 8 Stock Stroke Sizes to 8 ( increments) Cushions available either/both ends Pneumatic 20 psi. max. Hydraulic 400 psi. max. (non-shock)
AL DATA NFPA MXO (WITHOUT MOUNTS) SERIES T/TM/TL SERIES TS/TSM/TLS (oversized rod) SERIES TS/TSM/TLS ( BORE oversized rod) SERIES TDE/TMDE SERIES TSDE/TSMDE (oversized rod) SERIES TSDE/TSMDE ( BORE oversized rod) REFERENCE 6 A B C D E EE G J K 2 2 4 6 8 2 2.24.4.24.4.24.4.4..4..4.. 2.4. 2.4 2 2 4 6 8 * * * 2 2 /6 /6 KK /6-20 -6 /6-20 -6 /6-20 -6-6 -4-6 -4-6 -4-4 -2-4 -2 /6 * ports optional on, 2 and 2 bore cylinders. 2 2 4 6 8 LB 4 4 4 LD 4 4 4 4 4 MM (Rod Dia.) P 2 /6 2 /6 2 /6 2 /6 2 /6 2 /6 /6 /6 V Y 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 ZB 4 4 4 6 6 6 6 ZM 6 6 6 6 6 8 8 8 8 8 REFERENCE
MOUNTING STYLES FRONT FLANGE MOUNT (NFPA MFI) REAR FLANGE MOUNT (NFPA MF2) FRONT FACE MOUNT (FC) REAR FACE MOUNT (FC2) ANGLE MOUNTS (NFPA MS) SIDE LUG MOUNTS (NFPA MS2) ROD DIA. F FB R TF UF W ZF NFPA MF AND MF2 2 2 4 6 /6 /6 /6 /6 /6.4.84 2. 2.6.2 4.0 4.88 2 4 /6 /6 6 4 4 6 8 6 6 6 6 6 6 2 2 4 6 8 ROD DIA. B.24.4.24.4.24.4.4..4..4.. 2.4. 2.4 BC BD N/A /6 2 2 2 2 2 /6 /6 DD -28 /6-24 /6-24 -24-24 -20-20 -8 DN * R.4.84 2. 2.6.2 4.0 4.88 6.44 WF *Includes unthreaded cover plate FC2 2 2 4 6 8 ROD DIA. DD -28 /6-24 /6-24 -24-24 -20-20 -8 ND R.4.84 2. 2.6.2 4.0 4.88 6.44 ZB 4 4 4 6 6 6 6 ROD DIA. AB AH AL AO AT S SA XA NFPA MSI 2 2 4 6 8 /6 /6 /6 2 2 4 /6 AR 2 2 /6 AS ROD DIA. LH SB SJ SK SS ST SU SW TS US XS /6 2 2 4 6 6 6 8 8 6 6 6 6 6 8 8 8 /6 /6 /6 /6 /6 /6 NFPA MS2 2 2 4 6 8 2 2 4 /6 /6 2 /6 /6 /6 /6 /6 /6 /6 /6 /6 /6 /6 /6 /6 /6 /6 /6 /6 /6 /6 /6 2 /6 /6 /6 /6 FC /6 /6 /6 /6 2 4 6 4 4 6 8 2 2 2 /6 2 /6 2 /6 2 /6 2 /6 /6 /6 /6 /6 8 /6 2 /6
MOUNTING STYLES END LUG MOUNTS (NFPA MS) SIDE TAPPED MOUNTS (NFPA MS4) ROD DIA. EA EB EJ EL EQ ET R SE XE 2 2 4 6 8 2 2 4 /6 /6 /6 /6 /6 /6 /6 /6 /6 /6 /6 /6 /6 NFPA MS /6 /6 /6 /6 /6 2 /6.4.84 2. 2.6.2 4.0 4.88 6.44 6 6 6 /6 /6 /6 6 /6 6 6 6 6 6 /6 /6 8 CLEVIS MOUNT (NFPA MP) ROD DIA. NT SN TH TK TN XT 2 2 4 6 8-20 /6-8 -6 - - - -0-0 2 2 2 2 2 2 2 2 4 /6 NFPA MS4 /6 /6 /6 2 /6 2 /6 4 /6 2 /6 /6 2 /6 /6 2 /6 2 /6 2 /6 2 /6 2 /6 2 /6 2 /6 2 /6 /6 2 /6 /6 Pivot Pin Included. CLEVIS MOUNT (NFPA MP2) Pivot Pin Included. Not available on 8 bore cylinders. ROD DIA. CB CD CW L M XC XD 2 2 4 6 8 NFPA MP, MP2 AND MP4 6 6 8 8 8 8 6 6 6 8 8 N/A N/A Pivot pin is included on MP and MP2. See page 0 for optional pivot pin for MP4. PIVOT MOUNT (NFPA MP4) Not available on 8 bore cylinders. 8
MOUNTING STYLES HEAD TRUNNION MOUNT (NFPA MT) CAP TRUNNION MOUNT (NFPA MT2) NFPA MT AND MT2 2 2 4 6 8 ROD DIA. E 2 2 4 6 8 TD TL UT 4 4 6 XG 2 2 2 2 2 2 2 2 2 2 2 2 2 XJ 4 4 4 4 4 4 6 6 6 EXTENDED TIE RODS - FRONT AND REAR (NFPA MX) AA BB DD R NFPA MX, MX2 AND MX 2 2 4 6 8 2.02 2.6.. 4..8 6.. /6 /6 2 /6-28 /6-24 /6-24 -24-24 -20-20 -8.4.84 2. 2.6.2 4.0 4.88 6.44 EXTENDED TIE RODS - FRONT (NFPA MX) EXTENDED TIE RODS - REAR (NFPA MX2) ROD END STYLES SMALL MALE (NFPA SM)* INTERMEDIATE MALE (NFPA IM)* SHORT FEMALE (NFPA SF)* *Standard on all Flairline NFPA cylinders. When ordering, if no rod end style is specified, style SM will be supplied. *Optional *Optional ROD DIAMETER A * bore, V= B C CC D KK NA V.24-20 /6-20..4-4 -6.68 * ROD DIAMETER A B C CC D KK NA V. -2-4.4 2 2.4-2 -2.0
ACCESSORIES PART NUMBER ROD EYE S A CA CB CD KK 4-6- 4-6-A 4-6-6 4-6-6A 2 /6 2 /6 /6-20 -20-6 -4 4-6-2 2 /6-4 4-6-2A 2 /6 2-2 4-6-2B 2 /6 2-2 PART NUMBER PART NUMBER S A CB CD CE CW L KK /6-20 -20-6 -4-4 2-2 2-2 4-- 4--A 4--6 4--6A 2 2 4--2 4--2A 2 2 4 4--2B 2 2 4 Pivot pin included. CLEVIS BRACKET S CB CD CW DD E F FL -4- -4-6 -4-2 -4-2A 2 2 2 2 4-4-6 2 2 6 Pivot pin included. PIVOT BRACKET PART NUMBER -- --6 --2 --2A 2 MR S CB CD DD E F FL MR ROD CLEVIS 2 2 4 2 2 --6 2 2 6 See optional pivot pin below. 2 2 R 2 /6 /6 4 /6 R 2 /6 /6 4 /6 PART NUMBER BKT. PIN F, 4 PIVOT PIN FI, 4-40-2-40-2A -40-6 Snap rings included. PIVOT PIN S CD CL CM 2 /6 2 2 2 /6 4 4 /64 /6 /6 PART NUMBER 4-- 4--A 4--6 4--6A 4--2 4--2A 4--6 S A B C D E F G /6-20 2-20 2-6 2 /6-4 2 /6-4 -2-2 2 2 ALIGNMENT COUPLER 2 /6 2 /6 4 /6 2 Alignment couplers improve bearing and seal life by preventing excessive binding and friction caused by misalignment. Flairline alignment couplers also allow greater assembly tolerances than would typically be required which help simplify cylinder installation. Alignment couplers work equally well in push or pull applications. /6 /6 H 2 2 Max.Pull At Yield 0,000 4,000 4,000,000 64,000 8,000 4,000 0
MAGNETIC SWITCH OPTIONS SERIES TM, TSM, TMDE AND TSMDE REED SWITCH NO. 4-CRT MOUNTING CLAMP - INCLUDED WITH SWITCHES Warning Do not exceed Ratings. Permanent damage to sensor may occur. REED SWITCH NO. 4-CRR For use on through 2 bore cylinders (4-CRT, 4-HPT and 4-HNT). Warning Do not exceed Ratings. Permanent damage to sensor may occur. HALL EFFECT SWITCH NO. 4-HPT Warning Do not exceed 24 VDC. Permanent damage to sensor may occur. BRN WHT GRN For use on through 8 bore cylinders (4-CRR, 4-HPP and 4-HNN). HALL EFFECT SWITCH NO. 4-HPP HALL EFFECT SWITCH NO. 4-HNT RED BLACK Warning Do not exceed 24 VDC. Permanent damage to sensor may occur. WHT BRN GRN WHT Warning Do not exceed 24 VDC. Permanent damage to sensor may occur. HALL EFFECT SWITCH NO. 4-HNN Power Supply Polarity MUST be observed for proper operation. FAILURE TO OBSERVE POLARITY WILL CAUSE DAMAGE TO SWITCH. RED BLACK Temperature Range operational from -0 to +80 C Shock operational up to 0G (msec.)/reeds only. Not applicable for Halls. Vibration operational up to 20G (0 Hz)/Reeds only. Not applicable for Halls. WHT Warning Do not exceed 24 VDC. Permanent damage to sensor may occur. SENSOR TYPES AND TECHNICAL DATA PART NO. DESCRIPTION FUNCTION SWITCHING VOLTAGE SWITCHING CURRENT SWITCHING POWER SWITCHING SPEED MAX. VOLT. DROP SENSITIVITY 4CRT 4HPT 4HNT 4CRR 4HPP 4HNN Reed Switch MOV, LED Half Effect, LED Sourcing Half Effect, LED Sinking Reed Switch MOV, LED Half Effect, LED Sourcing Half Effect, LED Sinking SPST Normally Open Normally Open PNP output Normally Open NPN output SPST Normally Open Normally Open PNP output Normally Open NPN output -20 VDC/VAC 0/60 HZ 6-24 VDC 6-24 VDC -240 VDC/VAC 0/60 HZ 6-24 VDC 6-24 VDC 0. Amp Max 0.00 Amp Min. 0. Amp max. 0. Amp max. Amp Max.00 Amp Min. Amp Max Amp Max 0 Watts Max. 2 Watts Max. 2 Watts Max. 0 Watts Max. 24 Watts Max. 24 Watts Max. 0.ms operate 0.ms release.µ operate 0.µ release.µ operate 0.µ release 0.6 ms operate 0.0 ms release.µ operate 0.µ release.µ operate 0.µ release. Volts 0. Volts 0. Volts Volts 0. Volts 0. Volts 8 Gauss 8 Gauss 8 Gauss 8 Gauss 8 Gauss 8 Gauss
ENGINEERING DATA BORE 2 2 4 6 8 FORCE CHART FOR EXTEND AND RETRACT (POUNDS OF FORCE) ROD DIA. AREA AREA NET OPERATING PRESSURE (P.S.I.) 40 0 60 80 0 00 2 0 200 20 00 400.6.6 88 06 4 22 26 442 0 06 0.0.460 8 88 46 8 2 22 6 48 84 0.8 0.82 4 88 8 2 4 6 24 24 2.42.42 26 88 2 282 4 4 628 8 42 26 0.0 2.8 42 0 22 2 28 4 42 6 0 80 4 0.8 2.6 4 8 4 88 22 26 2 4 8 06 42 4.0 4.0 6 24 2 44 4 64 6 82 22 42 6 0.0 4.602 84 20 26 68 44 460 60 20 0 80 840 0.8 4.2 6 206 24 0 42 6 82 0 26 64 8.26 8.26 2 4 48 664 46 80 0 244 6 204 2488 8 0.8.0 00 6 4 60 6 2 02 88 22 004.48 6.8 22 4 40 4 62 68 8 022 62 0 204 224 2.66 2.66 0 628 4 00 0 2 8 2 42 6 026 0.8.8 4 8 0 42 060 8 4 6 26 24 4 42.48.082 44 4 66 88 08 8 662 226 20 24 442.6.6 8 82 8 6 64 244 24 2 40 80 84 0.8 8.80 4 42 08 66 88 26 282 0 42 6 40.48 8.0 26 08 08 42 6 8 226 22 60 48 44 260 28.24 28.24 44 66 2262 244 282 4 424 6 06 8482 0.48 26.0 02 60 24 24 26 4 408 8 66 80 06 2.40 2.86 0 2 2 200 228 28 24 880 4 646 60 04 0.266 0.266 20 2 06 402 42 02 628 40 00 266 0 2006.48 48.8 24 22 02 40 488 608 6 2 464 2 2.40 4.860 4 2 282 82 40 486 8 2 6 48 44 Figures in bold type indicate pounds of force generated when cylinder extends (push). Figures not in bold type indicate pounds of force generated when cylinder retracts (pull) with various rod diameters. FLUID POWER FORMULAS FORMULA FOR: WORD FORMULA LETTER FORMULA AIR PRESSURE In Pounds/Square Inch PRESSURE = FORCE (Pounds) UNIT AREA (Square Inches) P = F A or psi = F A CYLINDER PISTON AREA In Square Inches AREA = π x RADIUS 2 (Inches) A = πr 2 CYLINDER OUTPUT FORCE In Pounds, Push or Pull FORCE = Pressure (psi) x NET AREA (Square Inches) F = psi x A or F = PA CYLINDER VELOCITY or SPEED In Feet/Second VELOCITY = 2 X FLOW RATE (GPM) 2 x 60 x NET AREA (Square Inches) v = 2Q or v =.208Q 20A A CYLINDER VOLUME CAPACITY In Cubic Ft. of Air VOLUME = PISTON AREA (Square Inches) x STROKE (Inches) 28 V = Al Length l = 28 of Stroke FREE AIR USAGE (Output Volume of Free Air in Cubic Ft.) Used to size a Compressor FREE AIR (psia) = Cyl. Piston Area x Cyl. Stroke x (Cyl. Output in Sq. Inches in Inches Force +4.) 4. x 28 FA (Cu.Ft.) = A x Stroke x (Force + 4.) 4. x 28 2
ROD DIAMETER SELECTION All rods shown in extended position. In most cylinder applications, the standard rod diameter is suitable. In long stroke or high force applications, an oversized rod may be required. To select the minimum rod size for a particular application, determine bore size, stroke and force (see page 2). Select the type of mount from the above illustrations and determine the L length with the rod fully extended. Using the chart to the right, find the maximum force for your application, then look across that row and find the L length calculated from above drawing. If the exact value is not shown, use the next larger number to determine the appropriate rod diameter for your cylinder. FORCE IN POUNDS 0 00 200 00 00 8 0 28,000 2,20 2,00 2,000 4,000 2 6,000 8,000 0,000 20,000 0,000 PISTON ROD DIAMETER 62 4 44 2 88 42 0 60 2 0 4 2 22 2 0 80 22 0 0 6 4 40 2 6 8 62 6 2 80 4 40 6 2 48 40 STOP TUBE SELECTION Stop tubes are located between the piston and the head on long stroke cylinders. Stop tubes add length to the distance between the piston and the rod bearing which reduces the bearing load when the cylinder is fully extended. To determine if a stop tube is required and the length of the stop tube, determine the L length from the above drawings. If L is less than 40 inches, no stop tube is required. If L is over 40 inches, one inch of stop tube is recommended for every 0 inches or fraction thereof which is over 40 inches. L (INCHES) STOP TUBE LENGTH (INCHES) 0-40 0 4-0 -60 6-0 -80 8-0 - 00 2 4 6 L (INCHES) STOP TUBE LENGTH (INCHES) 0-0 - 20 8 2-0 - 40 4-0 - 60 6-0 Note: L is calculated from mounting point with rod extended. 0 2
SPECIAL OPTIONS OPTIONS SPECIFY AFTER MOUNTING STYLE: Cushions (not available on head-end of bore cylinders with oversized rods) Metal rod scraper (See page for ordering information) MRS inlet ports (available on, 2 and 2 bore cylinders ports are standard Ports Extra inlet ports head and/or cap end Inlet ports non-standard location head and/or cap end Non-stock stroke cylinders Viton packing (available on Series T, TS, TDE and TSDE) Magnetic switches (available on Series TM, TSM, TMDE and TSMDE) Stop tubes Extra port(s) [indicate location(s) and head and/or cap end] Port(s) [indicate location(s) and head and/or cap end] (See page for ordering information) Viton (See page for ordering information) (See page for ordering information) SPECIAL ROD OPTIONS SPECIFY AFTER MOUNTING STYLE: Rod end styles Intermediate Male (NFPA IM) or Short Female (NFPA SF) Special dimension C (rod extension) Special dimension A (thread length) Special dimension XX (male thread size) Tapped hole in end of rod (female thread size) Stainless steel rods IM or SF* C = (indicate dimension required) A = (indicate dimension required) XX = (indicate thread size required or plain rod end) XX = (indicate size and depth required - unless otherwise specified, all other dimensions will be Short Female) SS Rod *If no rod end style is specified, Small Male (NFPA SM) will be supplied. 4
ORDERING INSTRUCTIONS To order any products, specify information from categories listed below and arrange according to Example. Example: TM 2 HPP X 2 C MF MRS IM Special Options***** Series T, TS TL, TLS No. of Switches N/A Switch Model* N/A Bore, 2, 2 Stroke ** Cushions *** Head only Cap only Both Code H C HC Mounting Style **** TDE TSDE, 4,, 6, 8 One end only Both H HH TM TSM TMDE TSMDE Qty. 4-CRT 4-HPT 4-HNT 4-CRR 4-HPP 4-HNN 4-CRT 4-HPT 4-HNT 4-CRR 4-HPP 4-HNN, 2, 2, 4,, 6, 8, 2, 2, 4,, 6, 8 to 8 ( increments) Head only Cap only Both One end only Both H C HC H HH MF,MF2,FC,FC2 MS,MS2,MS,MS4 MP,MP2,MP4,MT MT2,MX,MX2,MX *Use suffix only. **Cylinders are available in even inch increments of stroke ( to 8 ) plus, 2, and strokes in bore sizes and 2. All others (up to 0 total stroke) are considered non-stock. The use of a stop tube effects stroke. See page for Stop Tube Selection to determine if a stop tube is required. ***Cushion not available on head-end of bore cylinders with oversized rods. ****MP, MP2, and MP4 are not available on Series TDE, TSDE, TMDE or TSMDE (double-ended cylinders). MF, MF2, MP2 and MP4 are not available on 8 bore cylinders. *****The special options in the example are metal rod scraper and rod end style Intermediate Male (NFPA IM). SPECIAL NOTE: WHEN ORDERING A CYLINDER WITH A STOP TUBE, SPECIFY TOTAL STROKE INCLUDING THE STOP TUBE LENGTH IN THE STROKE CATEGORY. IN THE SPECIAL OPTIONS CATEGORY, SPECIFY THE STOP TUBE LENGTH. REPLACEMENT PARTS, PACKING KITS AND LUBRICANTS ARE AVAILABLE FOR ALL FLAIRLINE CYLINDERS. Flairline will not assume responsibility for the application of its products. All specifications and dimensions are subject to change without notice.
HEAVY-DUTY (248) 48-0 Fax: (248) 48-2 Website: www.flairline.com FL-6-4-