HC USt capacity Hydraulic crawler crane Datasheet imperial HC
CONTENTS HC Page: Key........................................................................................... 3 Highlights..................................................................................... 3 Dimensions................................................................................... 4 Range Diagram 59HI Chord Boom................................................................................. 6 Load Charts With 59HI Offset Tip Boom 4 Sheave Tip............................................................... 7 Range Diagram 59HI Boom, #9HL Jib.............................................................................. 11 Load Charts With 59HI Offset Tip Boom 4 Sheave Tip, #9HL Jib....................................................... 12 Technical Description Hydraulic Crawler Crane............................................................................. 18 Transport Example for HC...................................................................................... 19 2
HIGHLIGHTS HC Features: tons ( mt) maximum lifting capacity 2 ft ( m) maximum length of main boom 200 ft + ft (61 m + 21 m) maximum boom and jib Power up / down and freefall on main and auxiliary drums Quiet, comfortable operator s cab with excellent viewing range Hydraulic counterweight removal system simplifies installation and removal Superior transportability 11 ft (3. m) width; 11 ft 3 inch (3.43 m) height 105,000 lb (47 627 kg) transport weight includes sideframes, 3rd drum and boom inner KEY Counterweight SC Sideframe Counterweight 3
DIMENSIONS HC 4
DIMENSIONS HC 5
RANGE DIAGRAM 59HI Chord Boom HC 6
LOAD CHART With 59HI Offset Tip Boom 4 Sheave Tip HC 52,0 lb + 23,000 lb SC (15.2 m) Boom length Boom Side Frames From Boom Pt. Radius Angle Extended to Ground (Feet) (Degrees) (Pounds) (Feet) 13 15 20 25 79.9 77.6 71.6 65.4 58.9 51.9 44.1 22.7 (18.3 m) Boom length 14.7 15 79.7 20 74.8 25 69.7 64.5 59.1 53.3.0 20.6 (21.3 m) Boom length 16.3 20 77.0 25 72.8 68.4 63.9 59.2 49.0 36.9 19.0 (24.4 m) Boom length 17.8 20 78.7 25 75.0 71.2 67.4 63.4 55.0 45.7 34.4 17.7 * see page 10 Notes to lifting capacity 220,000 * 1,0 * 123,2 87,6 67,6 54,0 46,010 34,4 203,5 * 189,9 * 123, 87,4 67,4 54,0 45,7 34,2 27, 56 55 54 52 49 46 41 26 66 65 64 63 61 58 54 45 27 177,910 * 75 122,9 75 87,320 73 67,2 71 54,5 69 45,620 67 34,0 59 26,9 48 22,0 29 161,8 122,7 87, 67,020 54,310 45,3 33,810 26,7 21,8 18,0 85 85 84 82 78 72 64 52 31 3 ANSI B.5 (27.4 m) Boom length Boom Side Frames From Boom Pt. Radius Angle Extended to Ground (Feet) (Degrees) (Pounds) (Feet) 19 20 25.6 79.9 76.7 73.4.0 66.6 59.4 51.6 42.9 32.3 16.7 (.5 m) Boom length 20.9 25 78.0 75.1 72.1 69.0 62.7 56.0 48.8.6.6 15.8 (33.5 m) Boom length 22.7 25 79.1 76.5 73.8 71.0 65.4 59.5 53.2 46.4 38.6 29.1 15.1 133,4 122,5 86,9 66,8 54,1 45,210 33,6 26,5 21,6 18, 15,4 122,3 86,7 66,6 53,9 44,9 33,3 26,3 21,4 17,8 15,1 13,0 105,0 86,5 66,410 53,720 44,7 33,1 26, 21,220 17,6 14,9 12,8 11,1 95 95 94 93 91 89 84 77 68 55 32 105 104 103 102 95 89 82 71 57 34 115 114 113 112 106 101 94 86 75 7
LOAD CHART With 59HI Offset Tip Boom 4 Sheave Tip HC 52,0 lb + 23,000 lb SC (36.6 m) Boom length Boom Side Frames From Boom Pt. Radius Angle Extended to Ground (Feet) (Degrees) (Pounds) (Feet) 24 25.5.1 77.6 75.2 72.7 67.6 62.3 56.7.8 44.3 36.9 27.9 14.4 (39.6 m) Boom length 25.8 78.6 76.3 74.0 69.4 64.6 59.6 54.3 48.6 42.4.4 26.7 13.8 (42.7 m) Boom length 27.7 79.4 77.3 75.2.9 66.5 62.0 57.2 52.2 46.8.8 34.0 25.7 13.3 91,6 86,3 66,1 53,4 44,5 32,910 25,8 20,9 17,410 14,720 12,0 10,910 9,5 86,1 65,9 53,0 44,3 32,0 25,6 20,7 17,210 14,510 12,0 10,0 9,310 8,1 76,6 65,7 53,0 44, 32,4 25,4 20,5 16,9 14,2 12, 10,4 9,0 7,8 6,920 125 125 124 122 121 117 113 107 99 78 62 36 1 134 133 131 128 124 118 112 104 94 82 65 37 145 144 143 142 139 1 124 117 108 98 85 67 39 3 ANSI B.5 1 (45.7 m) Boom length Boom Side Frames From Boom Pt. Radius Angle Extended to Ground (Feet) (Degrees) (Pounds) (Feet) 28 1.9.1 78.2 76.2 72.2 68.2 64.0 59.6 55.1.3 45.1 39.4 32.8 24.9 12.8 1 (48.8 m) Boom length.7 78.9 77.1 73.4 69.6 65.7 61.7 57.6 53.2 48.6 43.6 38.1 31.8 1 24.0 1 12.4 1 (51.8 m) Boom length 31.9 79.6 77.9 74.4.8 67.2 63.5 59.7 55.7 51.5 47.0 42.2 36.9 1.8 1 23.3 1 12.1 72,4 65,5 52,8 43,8 32,220 25,2 20,0 16,7 14,020 11,910 10,210 8,810 7,6 6,6 5,8 65,0 52,6 43,6 31,9 24,9 20,0 16,4 13,7 11,6 9,9 8,5 7,3 6,0 5,5 4,8 62,0 52,4 43,420 31,7 24,7 19,8 16,2 13,5 11,4 9,7 8,320 7,1 6,1 5,320 4,0 3,9 154 154 153 152 149 146 141 136 129 122 113 102 88 69 164 163 162 1 156 152 147 141 134 126 117 105 91 72 41 174 174 173 1 167 163 159 153 147 139 131 121 108 93 74 42 8
LOAD CHART With 59HI Offset Tip Boom 4 Sheave Tip HC 52,0 lb + 23,000 lb SC 1 (54.9 m) Boom length Boom Side Frames From Boom Pt. Radius Angle Extended to Ground (Feet) (Degrees) (Pounds) (Feet) 33 1 1 1 1.8.2 78.6 75.3 71.9 68.6 65.1 61.5 57.8 54.0 49.9 45.6 41.0.8 29.9 22.6 11.7 56,7 52,200 43,200 31,4 24,5 19,0 16,020 13,310 11,1 9,4 8,0 6,8 5,0 5,0 4,3 3,6 3,1 184 184 183 1 178 174 1 165 159 152 144 1 124 112 96 76 43 3 ANSI B.5 210 (64.0 m) Boom length Boom Side Frames From Boom Pt. Radius Angle Extended to Ground (Feet) (Degrees) (Pounds) (Feet) 38 1 1 1 1 1.8.2 77.4 74.6 71.7 68.8 65.9 62.9 59.7 56.5 53.2 49.7 46.0 42.0 37.8 33.0 27.6 41,2 *,5 *,7 23,8 18,910 15,320 12,0 10,4 8,7 7,3 6,1 5,1 4,310 3,5 2,920 2,3 1,8 214 213 211 209 206 202 198 193 188 182 174 166 157 147 1 121 104 1 (57.9 m) Boom length 34 81.0.7 79.2 76.1 72.9 69.7 66.5 63.2 59.7 56.2 52.4 48.5 44.3 1 39.8 1 34.8 1 29.1 1 22.0 1 11.4 52,4 * 194 51,9 194 42,9 193 31,2 191 24,3 188 19,3 185 15,7 181 13,0 176 10,9 1 9,2 164 7,820 157 6,6 149 5,6 139 4,810 128 4,0 115 3,4 99 2,8 78 2,410 44 220 (67.1 m) Boom length 39.9.7 78.0 75.3 72.6 69.8 67.1 64.2 61.3 58.2 55.1 51.9 1 48.5 1 44.9 1 41.0 1 36.9 1 32.3 36,220 *,920 *,5 23,6 18,6 15,0 12,3 10,220 8,4 7,0 5,0 4,0 4,0 3,0 2,6 2,0 1,5 224 223 222 219 216 213 209 204 199 193 187 179 171 162 151 138 124 200 (61.0 m) Boom length 36.9 79.7 76.8 73.8.8 67.7 64.6 61.4 58.0 54.6 51.0 47.2 1 43.1 1 38.8 1 33.9 1 28.3 1 21.5 200 11.1 46,5 * 204 42,7 203 31,010 201 24,0 198 19, 195 15,5 191 12,820 187 10,6 182 8,9 176 7,5 169 6,3 162 5,3 153 4,5 143 3,0 132 3,1 118 2,610 101 2, 1,0 45 2 (.1 m) Boom length 41.8 78.5 76.0 73.4.8 68.1 65.4 62.6 59.8 56.8 53.8 1.6 1 47.3 1 43.8 1.1 * see page 10 Notes to lifting capacity 31,0 * 27,9 * 23,410 18,4 14,8 12, 9,9 8,2 6,8 5,6 4,6 3,0 3,0 2,410 1,8 233 232 2 227 224 220 215 211 205 199 192 184 175 166 154 9
NOTES TO LIFTING CAPACITY HC! Warning This rating chart is invalid if the crane has been modified or altered by use of other than GENUINE AMERICAN PARTS as such modifications or alterations may affect its capacity or safe operation. See American Crane Corporation Service Bulletin #259. Ratings in this chart are in POUNDS and do not exceed the percentage of tipping specified for this crane by ANSI B.5. All ratings require that the crane be standing level on a firm uniformly supporting surface. Do not lift loads in excess of those shown on this chart. Lifting loads in excess of those shown or operation not in accordance with good operating practice, including limitations shown on page 3499 of Operator s Manual, can cause tipping, structural damage or catastrophic failure. Asterisk (*) areas on this chart indicate ratings that are limited by strength of material or factors other than stability (tipping). RADIUS IN FEET is the horizontal distance at ground level from the crane centerline of rotation to a vertical line through the center of gravity of the suspended load. When using the main boom fall with jib in place, the main fall ratings must be reduced by the jib effective weight shown on the jib rating chart plus twice the weight of all suspended blocks, slings, rope, etc., at the jib fall. See Appendix A. When using the main boom fall with boom tip extension in place, the main fall ratings must be reduced by the weight of the boom tip extension plus twice the weight of all suspended blocks, slings, rope, etc., at the boom tip extension fall. See Appendix A. Blocks, slings, buckets and other load carrying devices are considered part of the load. The weight of standard hoisting ropes for the rating at a given radius has been calculated as part of the boom point load and need not be considered in determining net allowable loads. See Appendix A. This chart was developed exclusively for use with a boom only. Under no circumstances are these ratings to be interpreted for use with a jib. Ratings shown on this chart make no allowance for such factors as out of plumb loads, wind, poor soil conditions, improper inflation of rubber tires and dynamic effects due to excessive operating speeds. The user (operator) must exercise judgment to make allowance for these conditions. See page 3499 of Operator s Manual for detailed information. No account is taken of the wind force on the load. The user must consider this effect, which can be substantial for loads with large surface areas. In any wind it is strongly recommended that taglines be used to control the load. BOOM HOIST LINE 12 parts of 3/4 inch diameter IPS wire rope with a minimum breaking strength of 51,200 pounds. PENDANT SUSPENSION LINE 2 parts of 1-3/8 inch diameter EEIPS wire rope with a minimum breaking strength of 211,000 pounds. MAIN LOAD LINE 1.000 inch dia meter EIPS wire rope with a minimum breaking strength of 103,0 pounds or 0.875 inch diameter EIPS wire rope with a minimum breaking strength of 79,0 pounds. Pinned into first hole in bar Pinned into second hole in bar Pinned into third hole in bar SIDEFRAME POSITION DEFINITIONS These ratings are valid for the sideframe positions as indicated below. Refer to the HC Operator s Manual for additional information. Sideframes fully extended (extenders in place) Sideframes mid-extended Sideframes fully retracted ERECTION Erection OVER-THE-END BLOCKED is with the boom over the idler end with idler tumblers blocked (See HC Operator s Manual for blocking instructions). Erection OVER-THE-SIDE is with the boom to the sideframes. Blocks, slings and other load carrying devices must be on the ground during erection. 10
RANGE DIAGRAM 59HI Boom, #9HL Jib HC 11
LOAD CHART With 59HI Offset Tip Boom 4 Sheave Tip, #9HL Jib HC 52,0 lb + 23,000 lb SC (12.2 m) Jib length (.5 m) (33.5 m) (36.6 m) (39.6 m) (42.7 m) 31 33 34 36.7 22,5* 78.6 22,5* 76.6 22,420 * 79.3 21,2* 72.3 21,7 * 75.0 20,710* 77.5 19,820* 68.0 21, *.7 20,1* 73.1 19,4 * 63.5 20,520 * 66.1 19,710* 68.5 18,2 * 58.9 18,220 61.4 18,220 63.7 16,9 * 53.9 15,520 56.5 15,520 58.7 15,520 48.7 13,3 51.1 13,3 53.2 13,0.9 22,5* 79.4 22,5* 77.5 22,5 *.0 21,320* 73.5 21,0 * 76.0 20,820 * 78.4 19,920 * 69.5 21,0 * 72.0 20,320 * 74.3 19,5 * 65.4 20,7 * 67.9 19,8 *.1 18,820 * 61.1 17,9 63.6 17,9 65.7 17,0 * 56.7 15,2 59.1 15,2 61.2 15,2 52.0 13, 54.3 13, 56.3 13, 46.9 11,4 49.2 11,4 51.1 11,4.8 22,520*.1 22,520* 78.2 22,520 *.6 21,4* 74.6 22,0 * 76.9 20,920 * 79.2 19,9 *.9 21,4 * 73.2 20,4* 75.4 19,620 * 67.0 20,9 * 69.3 20,010 * 71.5 19,310 * 63.1 17,6 65.4 17,6 67.4 17,6 59.0 14,9 61.3 14,9 63.2 14,9 54.7 12,8 56.9 12,8 58.8 12,8.2 11, 52.3 11, 54.2 11, 45.3 9,7 47.4 9,7 49.1 9,7 81.0 22,0*.6 22,0* 78.9 22,0* 75.5 22,1 * 77.7 20,9 * 79.8 20,010 * 72.0 21,610 * 74.2 20,5 * 76.3 19,6 * 68.5 21,010.6 20, * 72.6 19,3 * 64.8 17,4 66.9 17,4 68.9 17,4 61.0 14,7 63.1 14,7 65.0 14,7 57.1 12,610 59.2 12,610 61.0 12,610 52.9 10,0 55.0 10,0 56.8 10,0 48.6 9,4.6 9,4 52.3 9,0 43.9 8,320 45.8 8,3 47.4 8,3.8 22,4* 79.6 22,4 * 76.3 22,3 * 78.4 21,0 *.4 20,0 * 73.0 21,7 * 75.1 20,620 * 77.1 19,710 * 69.7 20,7 71.8 20,210 * 73.7 19,420 * 66.3 17,1 68.3 17,1.2 17,1 62.8 14,4 64.8 14,4 66.6 14,4 59.1 12,3 61.1 12,3 62.9 12,3 55.3 10,620 57.3 10,620 59.0 10,6 51.3 9,210 53.3 9,210 54.9 9,220 47.1 8,0 49.0 8,0.5 8,0 42.6 7,0 44.4 7,0 45.8 7,0 3 ANSI B.5 1 (45.7 m) 1 (48.8 m) 1 (51.8 m) 1 (54.9 m) 38 1 39 1 1 41 1 1 1 42 1 1 1 1.7 22,4*.1 22,4* 77.1 22,4 * 79.1 21,1 *.9 20,0 * 74.0 21,9 * 75.9 20,0 * 77.8 19,0 *.8 20,4 72.8 20,3 * 74.6 19,510 * 67.6 16,920 69.5 16,920 71.3 16,920 64.3 14,200 66.2 14,200 67.9 14,200.9 12,0 62.8 12,0 64.5 12,0 57.4 10,3 59.3 10,3.9 10,3 53.7 8,9 55.6 8,9 57.1 8,9 49.9 7,7 51.7 7,7 53.2 7,7 45.8 6,7 47.5 6,7 49.0 6,7 41.4 5,9 43.1 5,9 44.4 5,9.9 22,4*.6 22,4* 77.7 22,4 * 79.6 21,2* 74.8 22, * 76.7 20,7 * 78.4 19,810* 71.8 20,2 73.7 20,2 75.4 19,510 * 68.8 16,6.6 16,6 72.3 16,6 65.7 13,9 67.5 13,9 69.2 13,9 62.5 11,0 64.3 11,0 65.9 11,0 59.2 10,0 61.0 10,0 62.6 10,0 55.8 8,6 57.6 8,6 59.1 8,6 52.3 7,0 54.0 7,0 55.5 7,0 48.5 6,510.2 6,510 51.6 6,510 44.5 5,6 46.2 5,6 47.5 5,6.3 4,910 41.9 4,910 43.1 4,920.8 22,4* 78.3 22,4 *.1 21,2* 75.5 22,1 * 77.3 20,8 * 79.0 19,8 * 72.7 19,9 74.5 20,000 76.1 19,610 * 69.8 16,410 71.6 16,410 73.2 16,410 66.9 13,6 68.6 13,6.2 13,6 63.9 11,5 65.6 11,5 67.2 11,5.8 9,8 62.5 9,8 64.0 9,8 57.6 8,4 59.3 8,4.8 8,4 54.3 7,2 56.0 7,2 57.4 7,2.9 6,2 52.5 6,2 53.9 6,2 47.3 5,0 48.9 5,0.2 5,410 43.4 4,6 45.0 4,6 46.2 4,6 39.2 4,010.8 4,020 41.9 4,020.9 22,4* 78.8 22,4 *.6 21,3* 76.2 22,0 * 77.9 20,920 * 79.5 19,910 * 73.5 19,7 75.2 19,7 76.8 19,610 *.8 16, 72.5 16,1 74.0 16,1 68.0 13,420 69.7 13,420 71.2 13,420 65.2 11,2 66.8 11,2 68.3 11,2 62.3 9,5 63.9 9,5 65.4 9,5 59.3 8,1.9 8,1 62.3 8,1 56.2 6,9 57.8 6,9 59.2 6,9 53.0 5,9 54.6 5,9 55.9 6,000 49.6 5, 51.2 5, 52.5 5, 46.1 4,3 47.6 4,3 48.9 4,3 42.3 3,7 43.8 3,7 45.0 3,7 38.3 3,1 39.7 3,1.8 3,1 * see page 17 Notes to lifting capacity 12
LOAD CHART With 59HI Offset Tip Boom 4 Sheave Tip, #9HL Jib HC 52,0 lb + 23,000 lb SC (12.2 m) Jib length 1 (57.9 m) 44 1 1 1 1 1.8 21,9* 79.3 21,2 * 81.0 19,0* 76.8 20,0 * 78.4 18,0 *.0 17,6 * 74.2 18,9 * 75.9 18,0 * 77.4 17,0 * 71.6 15,8 73.3 15,8 74.7 15,8 69.0 13,1.6 13,1 72.1 13,1 66.3 11,0 67.9 11,0 69.3 11,0 63.6 9,320 65.1 9,320 66.5 9,320.7 7,910 62.3 7,910 63.7 7,910 57.8 6,720 59.4 6,7.7 6,7 54.8 5,720 56.4 5,7 57.7 5,7 51.7 4,8 53.2 4,8 54.5 4,8 48.5 4,.0 4, 51.2 4, 45.0 3,4 46.5 3,4 47.6 3,4 41.4 2,910 42.8 2,910 43.9 2,910 37.4 2,0 38.8 2,410 39.7 2,410 3 ANSI B.5 210 (64.0 m) 47 1 1 1 1 1.9 16,3*.2 16,0* 77.9 14,0 * 79.4 14,1 *.8 13,2 * 75.5 13,8 * 77.0 13,3 * 78.4 12,720 * 73.1 12,9 * 74.6 12,510 * 76.0 12,0 *.7 12,0 * 72.2 11,0 * 73.6 11,3 * 68.3 10,5 69.8 10,5 71.1 10,5 65.8 8,810 67.3 8,810 68.6 8,810 63.3 7,3 64.7 7,3 66.0 7,0.7 6,210 62.1 6,210 63.4 6,220 58.0 5,210 59.4 5,210.7 5,210 55.3 4,3 56.7 4,3 57.9 4,3 52.4 3,610 53.8 3,610 55.0 3,620 49.5 2,9.8 2,9 51.9 2,9 46.4 2,3 47.7 2,3 48.8 2,3 43.1 1,8 44.4 1,8 45.4 1,8 200 (61.0 m) 45 1 1 1 1 1 200 81.0 19,010* 79.8 18,4* 77.3 17,0 * 78.9 16,3*.4 15,320 * 74.9 16,2 * 76.5 15,5 * 77.9 14,7 * 72.4 15,2 * 74.0 14,6 * 75.4 14,0 * 69.9 12,910 71.5 12,910 72.9 12,910 67.4 10,7 68.9 10,7.3 10,7 64.7 9,0 66.3 9,0 67.6 9,0 62.1 7,6 63.6 7,6 64.9 7,6 59.3 6,4.8 6,4 62.1 6,4 56.5 5,4 58.0 5,4 59.3 5,4 53.6 4,0 55.1 4,0 56.3 4,0.6 3,8 52.0 3,8 53.2 3,8 47.4 3,200 48.8 3,200 49.9 3,210 44.0 2,620 45.4 2,6 46.5 2,6.4 2, 41.8 2, 42.8 2, 36.6 1,6 37.9 1,6 38.8 1,6 (15.2 m) Jib length 37.8 20,6* 79.8 20,3* 76.6 19,6 * 79.2 17,9* 73.3 18,9 * 75.9 17,0 * 78.4 16,210 *.0 18,3 * 72.6 16,9 * 75.0 15,910 * (39.6 m) 66.5 17,5 69.1 16,5 * 71.5 15,5 * 63.0 14,8 65.6 14,8 67.9 14,5 * 59.4 12,720 61.9 12,720 64.1 12,7 55.6 11,010 58.1 11,010.2 11,020 51.6 9,0 54.0 9,0 56.1 9,610 47.4 8,4 49.8 8,4 51.8 8,4 * see page 17 Notes to lifting capacity (42.7 m) 38 81.0 20,5*.4 20,410* 77.3 19,7 * 79.8 17,9* 74.2 19, * 76.7 17,5 * 79.0 16,2* 71.1 18,4 * 73.5 17, * 75.8 15,920 * 67.9 17,2.3 16,6 * 72.5 15,6 * 64.6 14,5 67.0 14,5 69.2 14,5 61.2 12,4 63.6 12,4 65.7 12,4 57.6 10,7.0 10,7 62.1 10,7 54.0 9,320 56.3 9,3 58.3 9,3.1 8,1 52.4 8,1 54.4 8,1 46.0 7,1 48.3 7,1.1 7,1 13
LOAD CHART With 59HI Offset Tip Boom 4 Sheave Tip, #9HL Jib HC 52,0 lb + 23,000 lb SC (15.2 m) Jib length 1 (45.7 m) 1 (48.8 m) 1 (51.8 m) 1 42 1 1 43 1 1 1.9 20,4* 78.0 19,8 *.3 17,9* 75.0 19,2 * 77.4 17,5 * 79.6 16,1 * 72.0 18,6 * 74.4 17,1 * 76.6 15,9 * 69.0 17,0 71.3 16,7 * 73.5 15,0 * 65.9 14,310 68.2 14,310.3 14,320 62.7 12,1 65.0 12,1 67.1 12,1 59.4 10,4 61.7 10,4 63.7 10,4 56.0 9,0 58.3 9,0.2 9,0 52.5 7,8 54.7 7,8 56.6 7,8 48.8 6,8.9 6,8 52.7 6,0 44.8 6,0 46.9 6,0 48.6 6,0.7 20,2* 78.5 19,8 *.8 17,920* 75.7 19,320 * 78.0 17,5 *.1 16,1 * 72.9 18,7 * 75.2 17,1 * 77.2 15,9 *.1 16,7 72.3 16,7 74.3 15,0 * 67.1 14,0 69.3 14,0 71.3 14,0 64.1 11,910 66.3 11,910 68.3 11,920 61.0 10,200 63.2 10,200 65.1 10,210 57.9 8,7.0 8,7 61.9 8,7 54.6 7,610 56.7 7,610 58.5 7,610 51.1 6,610 53.2 6,610 55.0 6,620 47.5 5,7 49.5 5,7 51.2 5,7 43.6 5,020 45.6 5,020 47.2 5,020.9 20,220* 79.1 19,8 * 76.4 19,3 * 78.6 17,5*.6 16, * 73.7 18,7 * 75.9 17,2 * 77.9 15,8 * 71.0 16,520 73.1 16,5 75.1 15,6 * 68.2 13,0.3 13,0 72.3 13,810 65.4 11,6 67.5 11,6 69.4 11,6 62.5 9,9 64.6 9,9 66.4 9,9 59.5 8,5 61.5 8,5 63.4 8,5 56.4 7,3 58.4 7,3.2 7,3 53.2 6,3 55.2 6,3 56.9 6,3 49.9 5,510 51.8 5,520 53.5 5,520 46.3 4,7 48.3 4,7 49.8 4,7 42.6 4, 44.5 4, 45.9 4, 3 ANSI B.5 1 (57.9 m) 200 (61.0 m) 46 1 1 1 1 1 48 1 1 1 1 1 200.9 19,8*.0 19,6* 77.6 19,2 * 79.5 17,4* 75.1 18,1 * 77.1 16,9 * 78.9 15,6 * 72.6 16,000 74.6 16,010 76.4 15,1 *.1 13,2 72.1 13,2 73.8 13,2 67.6 11,1 69.5 11,1 71.2 11,1 64.9 9,4 66.9 9,4 68.6 9,4 62.3 8,020 64.2 8,020 65.9 8,020 59.5 6,8 61.4 6,8 63.1 6,8 56.7 5,8 58.6 5,8.2 5,8 53.8 4,9 55.6 4,9 57.2 4,9.8 4,2 52.6 4,2 54.1 4,2 47.6 3,5 49.4 3,5.8 3,5 44.2 3,000 46.0 3,010 47.4 3,010.6 2,0 42.3 2,0 43.6 2,510.8 17,8*.4 17,6* 78.1 16,610*.0 15,3* 75.7 15,5 * 77.6 14,620 * 79.4 13,5 * 73.3 14,6 * 75.2 13,910 * 77.0 13,0 *.9 13,010 72.8 13,020 74.5 12,5 * 68.5 10,8.3 10,8 72.0 10,8 66.0 9,1 67.9 9,1 69.5 9,1 63.5 7,7 65.3 7,7 66.9 7,7.9 6,5 62.7 6,5 64.3 6,5 58.2 5,5.0 5,5 61.6 5,5 55.5 4,710 57.2 4,710 58.8 4,720 52.6 3,9 54.4 3,9 55.8 3,9 49.7 3,310 51.4 3,310 52.8 3,320 46.6 2,7 48.3 2,7 49.6 2,7 43.3 2,220 44.9 2,220 46.2 2,2 39.8 1,7 41.4 1,7 42.6 1,7 * see page 17 Notes to lifting capacity 1 (54.9 m) 45 1 1 1 1.8 20,0 * 79.5 19,810* 77.0 19,3 * 79.1 17,0* 74.4 18,8 * 76.5 17,200 * 78.4 15,8* 71.8 16,2 73.9 16,2 75.8 15,6 * 69.2 13,5 71.2 13,5 73.1 13,5 66.5 11,0 68.5 11,0.3 11,410 63.8 9,6 65.8 9,6 67.5 9,6 61.0 8,2 62.9 8,2 64.7 8,2 58.1 7,0.0 7, 61.7 7, 55.1 6,0 57.0 6, 58.6 6, 51.9 5,2 53.8 5,2 55.4 5,2 48.7 4,0.6 4,0 52.1 4,0 45.2 3,8 47.1 3,8 48.5 3,8 41.6 3,2 43.4 3,2 44.7 3,2 14
LOAD CHART With 59HI Offset Tip Boom 4 Sheave Tip, #9HL Jib HC 52,0 lb + 23,000 lb SC (18.3 m) Jib length 1 (45.7 m) 1 (48.8 m) 1 (51.8 m) 42 1 44 1 1 46 1 1 1 81.0 15,3* 78.8 14,9* 76.0 14,3 * 78.7 12,8* 73.2 13,7 * 75.9 12,4 * 78.4 11,0 *.3 13,0 * 73.0 11,9 * 75.5 10,9 * 67.4 12,0 *.0 11,5 * 72.5 10,620 * 64.4 12,2 * 67.0 11,1 * 69.4 10,320 * 61.3 10,5 63.9 10,5 66.2 10,0 * 58.1 9,1.7 9,1 63.0 9,1 54.8 7,9 57.4 7,9 59.6 8,000 51.4 6,9 53.9 6,9 56.0 7,000 47.7 6,.2 6, 52.3 6,.9 15,2* 79.3 14,9* 76.6 14,0 * 79.2 12,910* 73.9 13,8 * 76.5 12,5 * 78.9 11,3 * 71.2 13,4 * 73.8 12,0 * 76.2 11,010 * 68.4 12,9 * 71.0 11,6 * 73.3 10,6 * 65.6 12,020 68.1 11,2 *.4 10,0 * 62.7 10, 65.2 10,310 67.5 10, * 59.7 8,8 62.2 8,8 64.4 8,0 56.6 7,710 59.1 7,710 61.2 7,720 53.4 6,710 55.8 6,710 57.9 6,720.1 5,8 52.5 5,8 54.5 5,8 46.5 5, 48.9 5,.8 5,.8 15,200* 79.8 15,010* 77.2 14,4 * 79.7 12,920* 74.7 13,9 * 77.1 12,610 * 79.5 11,3 * 72.1 13,510 * 74.5 12,210 * 76.8 11,0 * 69.4 13, * 71.9 11,7 * 74.1 10,7 * 66.7 11,7 69.2 11,3 * 71.4 10,4 * 64.0 10,0 66.4 10,0 68.6 10,0 61.2 8,6 63.5 8,6 65.7 8,6 58.3 7,4.6 7,4 62.7 7,4 55.3 6,4 57.6 6,4 59.6 6,4 52.2 5,0 54.5 5,610 56.4 5,610 48.9 4,8 51.2 4,8 53.1 4,8 45.5 4,220 47.7 4,220 49.5 4,2 * see page 17 Notes to lifting capacity 3 ANSI B.5 1 (54.9 m) 1 (57.9 m) 200 (61.0 m) 47 1 1 1 1 49 1 1 1 1 1 1 1 1 1 1 200.9 15,1*.2 15,0* 77.8 14,5 *.1 12,9* 75.3 14,0 * 77.7 12,6 * 79.9 11,4 * 72.8 13,6 * 75.2 12,320 * 77.4 11, *.3 13,200 * 72.7 11,8 * 74.8 10,8 * 67.8 11,510.1 11,510 72.2 10,5 * 65.2 9,7 67.5 9,7 69.5 9,0 62.5 8,3 64.8 8,3 66.8 8,3 59.7 7,200 62.0 7,200 64.0 7,200 56.9 6,200 59.2 6,200 61.1 6,200 54.0 5,3 56.2 5,3 58.1 5,3 51.0 4,5 53.2 4,5 55.0 4,0 47.8 3,9 49.9 3,9 51.7 3,9 44.4 3,3 46.5 3,3 48.2 3,3.8 15,0*.6 14,9* 78.3 14,5 *.5 12,920* 75.9 14,0 * 78.2 12,620 *.3 11,4 * 73.5 13,6 * 75.8 12,3 * 77.9 11,1 * 71.1 13,2 * 73.4 12,000 * 75.5 10,8 * 68.7 11,2.9 11,2 73.0 10,610 * 66.2 9,5 68.4 9,5.4 9,5 63.7 8, 65.9 8, 67.9 8, 61.1 6,9 63.3 6,9 65.2 6,9 58.4 5,9.6 5,9 62.5 5,9 55.7 5,0 57.8 5,0 59.7 5,0 52.8 4,3 54.9 4,3 56.7 4,3 49.9 3,6 51.9 3,6 53.7 3,6 46.8 3, 48.8 3,.5 3, 43.5 2,0 45.5 2,0 47.1 2,610.9 15,000* 78.7 14,5 *.9 12,920* 76.5 14,0 * 78.7 12,6 *.7 11,200 * 74.2 13,710 * 76.4 12,3 * 78.4 11,200 * 71.9 13, 74.1 12,0 * 76.1 10,9 * 69.6 10,9 71.7 10,9 73.7 10,6 * 67.2 9,2 69.3 9,2 71.3 9,2 64.8 7,8 66.9 7,8 68.8 7,8 62.3 6,6 64.4 6,6 66.3 6,6 59.8 5,6 61.8 5,6 63.7 5,6 57.2 4,0 59.2 4,0 61.0 4,810 54.5 4,0 56.5 4,0 58.3 4,0 51.7 3,0 53.7 3,410 55.4 3,410 48.8 2,8.8 2,8 52.5 2,8 45.8 2,320 47.7 2,320 49.3 2,3 42.6 1,8 44.5 1,8 46.0 1,8 15
LOAD CHART With 59HI Offset Tip Boom 4 Sheave Tip, #9HL Jib HC 52,0 lb + 23,000 lb SC (21.3 m) Jib length 1 (54.9 m) 1 (57.9 m) 1 1 1 1 51 1 1 1 1 1.8 11,8* 78.5 11,3* 76.1 10,9 * 78.8 9,5* 73.7 10,510 * 76.4 9, * 78.9 8, * 71.3 10,010 * 74.0 8,7 * 76.4 7,8 * 68.9 9,5 * 71.5 8,4 * 73.9 7,6 * 66.4 9,1 * 69.0 8,1 * 71.4 7,4 * 63.9 8,4 66.4 7,0 * 68.8 7,2 * 61.3 7,2 63.8 7,2 66.1 7,0 * 58.6 6,2 61.1 6,2 63.4 6,2 55.9 5,420 58.4 5,420.6 5,4 53.0 4,6 55.5 4,6 57.6 4,6.0 4,020 52.5 4,020 54.6 4,0 46.9 3,4 49.4 3,4 51.4 3,4.9 11,820* 78.9 11,4* 76.7 11,0 * 79.2 9,5* 74.4 10,6 * 76.9 9,220 * 79.3 8,1 * 72.1 10, * 74.6 8,8 * 77.0 7,920 * 69.7 9,710 * 72.3 8,5 * 74.6 7,6 * 67.4 9,0 * 69.9 8,2 * 72.2 7,4 * 65.0 8,200 67.4 8,000 * 69.7 7,310 * 62.5 7,010 64.9 7,020 67.2 7,020.0 6,010 62.4 6,020 64.6 6,020 57.4 5,1 59.8 5,1 61.9 5,1 54.7 4,410 57.1 4,410 59.2 4,420 51.9 3,7 54.3 3,7 56.3 3,7 49.0 3,1 51.3 3,1 53.3 3,1 46.0 2,6 48.3 2,6.2 2,6 3 ANSI B.5 200 (61.0 m) 53 1 1 1 1 1 200.8 11,7* 79.3 11,4* 77.2 11,0 * 79.6 9,620* 75.0 10,6 * 77.4 9,2 * 79.7 8,200 * 72.8 10,2 * 75.2 8,9 * 77.5 7,9 *.5 9,820 * 73.0 8,6 * 75.2 7,7 * 68.3 9,3.7 8,3 * 72.9 7,5 * 65.9 7,9 68.3 7,9.5 7,3 * 63.6 6,7 66.0 6,7 68.1 6,7 61.2 5,7 63.5 5,7 65.7 5,7 58.7 4,8 61.1 4,8 63.1 4,8 56.2 4, 58.5 4,.5 4, 53.6 3,4 55.9 3,4 57.8 3,4.8 2,910 53.1 2,910 55.0 2,920 48.0 2,0.3 2,0 52.1 2,410 45.0 1,9 47.3 1,9 49.0 1,9 * see page 17 Notes to lifting capacity 16
NOTES TO LIFTING CAPACITY HC! Warning This rating chart is invalid if the crane has been modified or altered by use of other than GENUINE AMERICAN PARTS as such modifications or alterations may affect its capacity or safe operation. See American Crane Corporation Service Bulletin #259. Ratings in this chart are in POUNDS and do not exceed the percentage of tipping specified for this crane by ANSI B.5. All ratings require that the crane be standing level on a firm uniformly supporting surface. Do not lift loads in excess of those shown on this chart. Lifting loads in excess of those shown or operation not in accordance with good operating practice, including limitations shown on page 3499 of Operator s Manual, can cause tipping, structural damage or catastrophic failure. Asterisk (*) areas on this chart indicate ratings that are limited by strength of material or factors other than stability (tipping). RADIUS IN FEET is the horizontal distance at ground level from the crane centerline of rotation to a vertical line through the center of gravity of the suspended load. When using the main boom fall with jib in place, the main fall ratings must be reduced by the jib effective weight shown on the jib rating chart plus twice the weight of all suspended blocks, slings, rope, etc., at the jib fall. See Appendix A. When using the main boom fall with boom tip extension in place, the main fall ratings must be reduced by the weight of the boom tip extension plus twice the weight of all suspended blocks, slings, rope, etc., at the boom tip extension fall. See Appendix A. Blocks, slings, buckets and other load carrying devices are considered part of the load. The weight of standard hoisting ropes for the rating at a given radius has been calculated as part of the boom point load and need not be considered in determining net allowable loads. See Appendix A. Ratings shown on this chart make no allowance for such factors as out of plumb loads, wind, poor soil conditions, improper inflation of rubber tires and dynamic effects due to excessive operating speeds. The user (operator) must exercise judgment to make allowance for these conditions. See page 3499 of Operator s Manual for detailed information. No account is taken of the wind force on the load. This effect, which can be substantial for loads with large surface areas, must be considered by the user. In any wind it is strongly recommended that taglines be used to control the load. BOOM HOIST LINE 12 parts of 3/4 inch diameter IPS wire rope with a minimum breaking strength of 51,200 pounds. PENDANT SUSPENSION LINE 2 parts of 1-3/8 inch diameter EEIPS wire rope with a minimum breaking strength of 211,000 pounds. JIB BACKSTAY AND FRONTSTAY LINES 2 parts of 0.875 inch diameter IPS wire rope with a minimum breaking strength of 69,200 pounds. JIB WHIP LINE 7/8 inch diameter EIPS wire rope with a minimum breaking strength of 79,0 pounds. SIDEFRAME POSITION DEFINITIONS These ratings are valid for the sideframe positions as indicated below. Refer to the HC Operator s Manual for additional information. ERECTION Erection OVER-THE-END BLOCKED Pinned into first hole in bar Sideframes fully extended (extenders in place) Pinned into second hole in bar Sideframes mid-extended Pinned into third hole in bar Sideframes fully retracted is with the boom over the idler end with idler tumblers blocked (See HC Operator s Manual for blocking instructions). Erection OVER-THE- SIDE is with the boom to the sideframes. Blocks, slings and other load carrying devices must be on the ground during erection. 17
TECHNICAL DESCRIPTION Hydraulic Crawler Crane HC Maximum lifting capacity tons ( mt). Boom systems 59HI Tubular Chord Boom, pin connected with 4 Sheave Tip 2 ft maximum boom length. 2 ft maximum boom and jib combination length. 25 ft (7.6 m) inner and 25 ft (7.6 m) outer and 10 ft / 20 ft / ft available inserts provide boom compositions in 10 ft (3 m) increments from ft (15.2 m) to 2 ft ( m). Robust engine Cummins Model QSB 6.7 Turbocharged, after cooler, diesel engine, 4 cycle, 6 cylinders, direct fuel injection, 9 cubic inch displacement, 6.7 liters, 2 BHP@2000 rpm, 105 gallons fuel tank capacity. Environmental operator s cab Designed to provide excellent viewing range and quiet, comfortable operation. 37 inch (0.91 m) wide cab has wide curved windows on both top and bottom. Easy-to-operate modular and ergonomically designed controls reduce operator fatigue and increase productivity. Load Moment Indicator with interactive screen. Operator can select from three display modes: loaded condition diagram, rated lifting curve or rated lifting load table. Adjustable operator s seat, radio, air conditioner, overhead window, sun visor, fan, overhead and front wipers and drum rotation indicators are standard. Heavy duty carbody and crawlers Fabricated steel carbody is deep box constructed with square axles for the crawler side frames. Precision machined top supports anti-friction swing circle and multiple pass hydraulic swivel joint. Crawlers have high alloy steel tumbler yokes and rigid fabricated structures with sealed rollers. 36 (914 mm) crawler shoes. Travel mechanism is set within shoe width. Side frames extended or retracted by cylinders inside the carbody. Two travel speed settings 0. / 0.87 mph (0.96 / 1.4 km/h). % (17 ) gradeability. Powerful, high-speed hoist system Independent main and auxiliary load hoisting drums. Main drum is grooved for 1 inch (25 mm) diameter rope. Max line speed is 513 fpm (156 m/min), max single line pull is,6 lb (18 4 kg). Rated single line pull is 29,0 lb (13 381 kg). Auxiliary drum is grooved for 7/8 inch (22.4 mm) diameter rope. Max line speed is 553 fpm (168 m/min), max single line pull is 37,6 lb (17 086 kg). Rated single line pull is 22,0 lb (10 297 kg). Freefall on main and auxiliary drums. Each drum, including optional third, has power up/down and freefall. Load hoists are further controllable in stepless mode. Ample work space in front of the drums allows easy access for cable installation and maintenance. External contracting brake. Internal expanding band clutch. 3.0 rpm swing speed. High capacity, dependable hydraulic system Open circuit system has 2 variable displacement piston pumps with system capacity of 183 gpm (692 lpm). Hydraulic reservoir with 79 gallons (0 l) capacity and 10 micron filtration. Component working range is between -4 and 203 F (-20 and 95 C). Four piece removable counterweight Four piece pin connected counterweight can be assembled or disassembled easily within minutes. Hydraulic counterweight removal system is standard and makes the HC one of the most transportable cranes in its class. Moves on five trucks with full boom and #9HL jib. At 17 ft, 0.5 inch (5.2 m) wide and 11 ft (3. m) high, the basic HC will transport on a standard lowboy trailer. Options include Third drum Single sheave extension Third drum with free spooling Transportation package Automotive type lights Single sheave extension Hydraulic power take off Tagline winder Jib and jib inserts 18
TRANSPORT EXAMPLE FOR HC With 200 ft 59 H Boom & ft Jib and 3rd Drum HC Loads required as follows (weights shown do not include blocking or tie-down material): LOAD NO. 1 Step Deck 2 x crawler side frame counterweights (11,0 each)......................................................... 23,000 lbs boom center section with pendants.................................................................... 2,6 lbs 20 ft jib inner.......................................................................................... 8 lbs 1 x upper counterweight................................................................................. 4,0 lbs TOTAL LOAD......................................................................................,9 lbs LOAD NO. 2 Step Deck Middle portion of counterweight........................................................................... 12, lbs boom center section................................................................................. 2,6 lbs 20 ft jib outer.......................................................................................... 4 lbs 1 x upper counterweight................................................................................. 4,0 lbs TOTAL LOAD...................................................................................... 19,6 lbs LOAD NO. 3 Step Deck Lower portion of counterweight........................................................................... 32,000 lbs 25 ft boom outer section................................................................................ 4,200 lbs 20 boom center section................................................................................. 1,975 lbs Main load block........................................................................................ 1,0 lbs Overhaul ball.......................................................................................... 6 lbs TOTAL LOAD......................................................................................,325 lbs LOAD NO. 4 Step Deck 1 x 10 boom center section.............................................................................. 1,0 lbs 1 x boom center sections............................................................................. 2,6 lbs 10 jib center section.................................................................................... 1 lbs 20 jib center section.................................................................................... 385 lbs TOTAL LOAD...................................................................................... 4,5 lbs LOAD NO. 5 Basic Crane: a) Complete upper structure b) Carbody and sideframes c) Retractable A-frame d) Boom inner section and boom stops e) Third drum TOTAL WEIGHT OF BASIC CRANE, etc.)............................................................. 105,000 lbs 19
Effective Date: May 2014. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. Copyright Terex Cranes 2014 Terex Cranes, Global Marketing, Dinglerstraße 24, 66482 Zweibrücken, Germany Tel. +49 (0) 6332 8, Email: info.cranes@terex.com, www.terexcranes.com www.terexcranes.com Brochure Reference: TC-DS-I-E-HC-05/14