Electrical steel isovac high-perm NO30-15 Data sheet April 2016 The specialist for the automotive industry isovac is the electrical steel made by voestalpine and stands for highest energy efficiency. With its excellent attribute profile, isovac provides a higher level of quality that will help you remain a step ahead of the competition. FULL-FINISED ELECTRICAL STEEL SEMI-FINISED ELECTRICAL STEEL This non-grain-oriented, full-finished isovac grade is produced on one of the world s most modern continuous annealing lines for electrical steel and is especially suited to high-frequency applications and fast-turning machinery as a result of its high alloy content and finely tuned microstructure. isovac P NO30-15 forms an optimized balance between magnetic and mechanical properties, making new structural designs possible in the automotive industry. Convincing advantages p Lower losses, particularly in the high-frequency range, for increased machine output and efficiency (up to 10% at 1.5 T and 400/1000 z) p Optimized analysis strategy for best paint adhesion p igh dimensional accuracy of geometry for implementation in innovative structural designs voestalpine Steel Division www.voestalpine.com/isovac
voestalpine supplies isovac P NO30-15 pursuant to EN 10303, an electrical steel of the highest quality. We offer you a customer-focused overall package of products, service and logistics in addition to all the advantages of our integrated metallurgical facility and Steel Service Centers. Mechanical properties Tensile test according to DIN EN ISO 6892-1 and hardness according to DIN EN ISO 6507-1 (Typical values); Test direction: Longitudinal according to isovac Yield strength R e [MPa] 0.2 %-Yield strength R p0.2 [MPa] Tensile strength R m [MPa] Elongation A 80 [%] isovac P NO30-15 435 430 540 18 200 Magnetic properties in as-delivered condition (Typical values) Test direction: Mean value from longitudinal and transverse measurements at 50/400 z, single-sheet test ardness V5 2 isovac P NO30-15 04/2016 Specific total loss Magnetic polarization Relative permeability 1.0 T P10 1.5 T P15 2500 A/m 25 5000 A/m 50 10000 A/m 100 1.5 T according to isovac 400 z 400 z [W/lb] 400 z 400 z [W/lb] 50 z [T] 50 z [T] 50 z [T] 50 z isovac P NO30-15 14.0 6.4 35.0 15.9 1.56 1.66 1.78 1000 Physical properties (Typical values) according to isovac Density [g/cm 3 ] Specific electrical resistance s [μωcm] Thermal conductivity [W/mK] isovac P NO30-15 7.60 64.5 22
Characteristics / loss curve and characteristics / magnetization curve Test direction: Mean value from longitudinal and transverse measurements at indicated frequencies, single-sheet test 1000.0 100.0 P S 10.0 1.0 2000 1800 1600 1400 1200 1000 800 3 isovac P NO30-15 04/2016 600 0.1 0.0 50 z 60 z 200 z 400 z 500 z 600 z 700 z 800 z 1000 z 0 500 1000 1500 2000 400 200 50 z 0 10 100 1000 10000 Characteristics / permeability curve Test direction: Mean value from longitudinal and transverse measurements at 50 z, single-sheet test 14000 12000 10000 8000 µ r 6000 4000 2000 50 z 0 0 500 1000 1500 2000
Frequency dependence of magnetic properties Test direction: Mean value longitudinal and transverse at indicated frequencies and polarizations, single-sheet test 50 z 150 30 0.04 4155 200 33 0.07 4950 250 37 0.10 5733 300 40 0.13 6499 350 43 0.17 7242 400 46 0.20 7956 450 50 0.24 8635 500 52 0.28 9273 550 55 0.32 9865 600 58 0.37 10399 650 60 0.42 10865 700 63 0.47 11252 750 66 0.53 11549 800 69 0.59 11745 850 73 0.65 11828 900 77 0.71 11783 1000 88 0.85 11244 1050 96 0.93 10723 1100 105 1.01 10039 1150 117 1.10 9205 1200 135 1.19 8223 1250 163 1.29 7091 1300 203 1.41 5794 1350 272 1.55 4359 1400 441 1.70 2966 1450 784 1.86 1812 1500 1342 2.02 1007 1550 2150 2.17 588 1600 3252 2.31 411 1650 4671 2.46 308 1700 6321 2.61 234 1735 7500 2.72 184 1791 10000 2.94 142 60 z 150 30 0.05 4041 200 34 0.09 4807 250 37 0.13 5565 300 40 0.16 6307 350 44 0.21 7031 400 47 0.25 7731 450 50 0.30 8402 500 53 0.35 9039 550 56 0.40 9637 600 58 0.46 10183 650 61 0.52 10665 700 63 0.59 11070 750 66 0.66 11384 800 69 0.73 11595 850 73 0.81 11689 900 77 0.89 11656 1000 89 1.06 11162 1050 96 1.16 10680 1100 105 1.26 10027 1150 118 1.36 9201 1200 135 1.48 8223 1250 163 1.61 7110 1300 202 1.76 5836 1350 271 1.92 4407 1400 435 2.12 3007 1450 769 2.32 1842 1500 1323 2.53 1024 1550 2139 2.71 597 1600 3254 2.89 412 1650 4679 3.09 306 1700 6326 3.29 232 1735 7500 3.41 184 1791 10000 3.72 143 4 isovac P NO30-15 04/2016 200 z 150 31 0.23 3863 200 35 0.39 4457 250 40 0.55 5039 300 44 0.72 5606 350 48 0.91 6151 400 52 1.11 6670 450 56 1.32 7155 500 59 1.56 7604 550 62 1.82 8010 600 65 2.11 8378 650 68 2.42 8708 700 71 2.74 9007 750 74 3.09 9275 800 77 3.45 9518 850 81 3.83 9735 900 85 4.23 9912 1000 94 5.09 10086 1050 100 5.56 10028 1100 108 6.06 9741 1150 118 6.59 9127 1200 135 7.16 8245 1250 161 7.79 7174 1300 200 8.49 5903 1350 269 9.31 4449 1400 434 10.25 3020 1450 769 11.29 1842 1500 1324 12.36 1023 1550 2143 13.37 595 1600 3263 14.45 410 1650 4698 15.71 304 1700 6359 17.13 231 1733 7500 18.51 184 1790 10000 19.98 142
Frequency dependence of magnetic properties Test direction: Mean value longitudinal and transverse at indicated frequencies and polarizations, single-sheet test 400 z 100 29 0.20 2954 150 34 0.60 3414 200 39 1.00 3870 250 45 1.42 4317 300 50 1.87 4752 350 55 2.35 5170 400 60 2.87 5567 450 64 3.44 5940 500 68 4.07 6283 550 72 4.76 6593 600 76 5.52 6869 650 80 6.34 7112 700 83 7.23 7321 750 87 8.17 7495 800 91 9.17 7636 850 95 10.23 7742 900 99 11.35 7811 1000 110 13.79 7835 1050 116 15.12 7784 1100 124 16.56 7679 1150 133 18.11 7504 1200 146 19.78 7226 1250 166 21.58 6773 1300 200 23.58 5926 1350 266 25.88 4561 1400 430 28.56 3056 1450 768 31.63 1840 1500 1324 34.85 1024 1550 2140 38.08 598 1600 3254 41.76 412 1650 4682 46.30 306 1700 6338 51.54 232 1734 7500 54.70 184 1791 10000 63.53 142 500 z 100 30 0.28 2843 150 35 0.82 3269 200 41 1.37 3691 250 47 1.94 4104 300 52 2.55 4504 350 58 3.21 4886 400 63 3.94 5246 450 68 4.74 5580 500 73 5.63 5883 550 77 6.62 6151 600 82 7.71 6386 650 86 8.89 6587 700 90 10.15 6756 750 94 11.49 6894 800 98 12.91 7002 850 103 14.40 7080 900 107 15.97 7128 1000 119 19.44 7142 1050 125 21.36 7102 1100 132 23.43 7005 1150 141 25.68 6832 1200 154 28.12 6620 1250 176 30.78 6345 1300 204 33.71 5702 1350 257 37.00 4489 1400 429 40.80 3065 1450 809 45.19 1839 1500 1394 49.99 991 1550 2188 55.10 573 1600 3269 60.99 410 1650 4687 68.08 314 1700 6352 76.10 239 1735 7500 81.61 184 1789 10000 93.79 142 5 isovac P NO30-15 04/2016 600 z 400 66 4.87 5182 450 70 6.02 5420 500 75 7.23 5640 550 80 8.54 5827 600 85 9.98 5983 650 90 11.52 6113 700 95 13.18 6223 750 100 14.95 6317 800 105 16.83 6402 850 110 18.82 6479 900 115 20.93 6543 1000 126 25.61 6587 1050 133 28.20 6549 1100 140 31.02 6464 1150 150 34.09 6322 1200 163 37.40 6104 1250 180 40.95 5789 1300 210 44.86 5378 1350 265 49.15 4493 1400 427 54.62 3073 1450 787 61.81 1816 1500 1317 67.24 1030 700 z 400 68 6.14 4909 450 73 7.59 5154 500 78 9.13 5380 550 83 10.80 5571 600 88 12.63 5727 650 94 14.61 5851 700 99 16.74 5948 750 104 19.03 6021 800 110 21.46 6073 850 116 24.04 6106 900 122 26.81 6118 1000 136 32.96 6064 1050 143 36.40 5992 1100 152 40.14 5904 1150 161 44.18 5801 1200 173 48.52 5632 1250 191 53.17 5348 1300 221 58.32 4961 1350 274 63.99 4228 1400 428 71.15 3046 1450 779 80.55 1849 1500 1321 87.91 1028
Frequency dependence of magnetic properties Test direction: Mean value longitudinal and transverse at indicated frequencies and polarizations, single-sheet test 800 z 450 77 9.23 4853 500 83 11.12 5038 550 88 13.17 5198 600 94 15.40 5332 650 99 17.82 5442 700 105 20.43 5530 750 111 23.24 5598 800 117 26.23 5647 850 123 29.42 5680 900 130 32.84 5691 1000 145 40.53 5636 1050 153 44.86 5565 1100 163 49.55 5481 1150 172 54.60 5394 1200 184 60.06 5259 1250 200 65.97 5025 1300 230 72.43 4658 1350 282 79.74 4015 1400 428 88.27 3020 1450 765 98.12 1889 1500 1311 109.45 1045 1000 z 400 77 10.50 4287 450 83 13.05 4458 500 90 15.73 4615 550 96 18.66 4745 600 103 21.88 4845 650 109 25.39 4918 700 116 29.21 4965 750 124 33.35 4987 800 132 37.83 4985 850 140 42.67 4960 900 149 47.87 4917 1000 169 59.48 4793 1050 180 65.95 4719 1100 191 72.97 4637 1150 204 80.61 4547 1200 216 88.76 4463 1250 228 97.41 4367 1300 255 107.08 4115 1350 298 118.21 3674 1400 439 131.11 2950 1450 796 146.14 1831 1500 1305 162.52 1024 6 isovac P NO30-15 04/2016
Available dimensions Delivery form Width according to isovac [mm] isovac P NO30-15 Deliverable coating systems Length [mm] Wide strip/slit strip 19 1220 - Cut-to-length sheets 300 1220 300 6000 according to isovac Uncoated C-3 Backlack C-5 C-6 Blue isovac P NO30-15 X X On request X X - 7 isovac P NO30-15 04/2016 Please find further information and downloadable files at www.voestalpine.com/isovac Information and product properties provided in this publication have the sole purpose of giving non-binding technical guidance and by no means replace individual expert advice from our sales and customer service team. Information and product properties provided in this brochure shall not be deemed guaranteed characteristics unless this has been agreed upon individually. Technical changes reserved. Errors and misprints excepted. No part of this publication may be reprinted without explicit written permission by voestalpine Stahl Gmb. voestalpine Steel Division voestalpine-straße 3 4020 Linz, Austria T. +43/50304/15-8018 produktmanagement@voestalpine.com www.voestalpine.com/isovac