LUXAFLEX ROLLER BLINDS WITH PATENTED Edge TECHNOLOGY

LUXAFLEX ROLLER BLINDS WITH PATENTED Edge TECHNOLOGY SIMPLY SMARTER BY DESIGN

E D G E Ergonomically Designed for Greater Efficiency

LUXAFLEX ROLLER BLINDS WITH Edge TECHNOLOGY INTRODUCTION Introducing Luxaflex Roller Blinds with patented EDGE Technology, our roller blind hardware system developed by an international design team specifically for our requirements. Featuring a sleek architectural design with smooth operation and unrivalled inner strength, EDGE Technology allows you to span even the largest window beautifully. Highly durable hardware delivers smooth and reliable operation. SIMPLY SMARTER BY DESIGN

EDGE Features & Benefits SMOOTH AND LIGHT OPERATION Can be operated using either standard chain drive or motorised technology. The durable standard chain drive is available in two ratio mechanism 1:1 and 1:1.75. The standard 1:1.75 ratio enables a heavier blind to be lifted without the need for a spring booster. However, you can nominate to use the optional 1:1 ratio. It is also aesthetically pleasing in one size format for a consistent look throughout the home. Universal spring loaded idle ends provide for smooth and easy installation. The aluminium tube has been engineered to perform well with minimal deflection over large expanses. OUTER BEAUTY Hardware components are available in four colour options White, Black, Grey and Magnolia. All brackets are universal in design which means the operating side can be changed simply on site if required. Two bracket sizes are available, 38mm and 55mm which ensures the correct bracket can be selected for challenging installations and maximises the drop capacity. Brackets are available with slim line end caps which are recommended for all face fit installations. 4 luxaflex.com.au

EDGE Features & Benefits LIVING WITH INNOVATION Standard Dual Roller Linked Blinds Two compact dual bracket designs are available: - The standard (under) roll configuration ensures the blind skin can be fitted close to the window. - The reverse (over) roll configuration provides a self pelmet effect. Both dual brackets can be installed with either same side or opposite end controls and have universal mounting options. An optional patented integrated levelling device makes it easy to adjust shades after mounting. Two standard linking systems are available: - The standard connector set minimises the intermediate gap on linked configurations. - The optional aligner link maximises flexibility during installation with a fine adjustment option for aligning the level of the blinds. Both linking options have 15 degree play. This provides an allowance for slightly misaligned installations. An independent linking option is available for configurations that require multiple operation. A 45 and 90 degree linking mechanism is also available for bay and corner windows. A sleek (84mm projection) and contemporary head box and fascia system are available in both an anodised and powder coated finish (white, black or magnolia) with colour coded endcaps. Both the head box and fascia system can be installed in both reveal and face fit positions and have a snap lock cover and plastic outlets for easy installation and quiet operation. To obtain room darkening, the head box system can be installed with side channels, available in matching powder coated colours (white, black or magnolia) or anodised finish. Headbox System SIMPLY SMARTER BY DESIGN

EDGE Heavy Duty SUPERIOR DESIGN Introducing Luxaflex Heavy Duty Roller Blinds with patented EDGE Technology, a new heavy duty roller blind hardware system developed by Hunter Douglas. The new modular system is designed to allow for larger blind widths, featuring a 65 mm tube with the strength to allow for widths up to 3.8 metres and drops up to 5.5 metres. 6 luxaflex.com.au

EDGE Heavy Duty Features & Benefits Two bracket sizes available 55mm and 75mm which ensures the correct bracket can be selected to maximise the drop capacity. The aluminium tube has been engineered to perform well with minimal deflection over large expanses. Universal bracket system allows for simple installation. The idle end plug has a 30mm play to provide for incorrect measurements. Components are available in two colour options: black and white. Can link up to 3 blinds with 30m 2 combined sq area. Straight linked blinds work smoothly up to an angle of 15 degrees to compensate for installation errors and allows for arches with a large radius to be installed without a universal joint. SMOOTH AND LIGHT OPERATION A range of durable hardware options are now available to span widths up to 3.8m and drops up to 5.5m with smooth and reliable operation every time. Chain operated rollers are now available with extended limitations to cater for longer drops, while motorisation has flourished with a wide selection of motor options. Now you can select from the most superior motorised solutions to link blinds up to 30m² or simply motorise a single heavy duty blind with a simple offordable solution. FABRIC RANGE A range of new fabric options that were never offered before in the heavy duty program are now available, Please check the new price list for more information. INNER STRENGTH The system is available with a 50mm or 65mm aluminium tube. Both tubes have been engineered with symmetrical keyways to reduce deflection over large expanses. Chain operated blinds will be supplied with the 50mm tube while motorised blinds will be supplied with the 65mm tube as standard. EASE OF ASSEMBLY AND INSTALLATION Ease of assembly and installation has been the main focus point of the new system. Introducing two new heavy duty universal brackets that can maximise the limitation of the overall blind capacity and ensures the correct selection can be made for challenging installations. For all face fit installations, bracket and screw covers will be supplied as standard. An Aligner Set is available for linked blinds which will allow fine adjustments to be made to align bottom rails during installation. For windows that are not square, an integrated leveller can be used to adjust the height on the idle end to ensure the lateral opening is parallel. This is particularly important for linked blinds with long drops. SIMPLY SMARTER BY DESIGN

EDGE Metal Chain Drive LEADING DESIGN Introducing the new premium metal chain drive with a unique design statement that will complement the modern home. A highly durable hardware and operating system that allows for high sound absorption whilst delivering smooth and reliable operation. Award Winning Design Furniture and Home Textiles product design award at the 2012 if design awards ceremony. Made from ZAMAC (Zinc, Aluminium, Magnesium, Alloy, Copper) with a high quality finish. Heavy-duty 1:1 ratio mechanism with a patented technique providing smooth and easy lift capabilities. Aluminium designer bracketing system provides unique aesthetics and strong mounting platform for any home. The plastic cover is available in Black or Grey. The stylish designer bracket can also be paired with the standard chain drive available in both 1:1 and 1.75:1 ratio for easier raising and lowering of larger blinds. 8

EDGE Accessories CHAIN TENSIONER A new chain tensioner has been designed to complement the current offerings within the EDGE System. Designed in collaboration with installers to provide an easy installation process and to meet child safety regulations. The chain tensioner comprises high quality plastic components to reduce noise generated from the chain without compromising on quality. A rubber wheel is used to ensure quieter operation and reduce the overall noise generated from the system. Easy clipping action minimises the use of screws to give a stylish appearance. Two kit options are available for face fit or reveal fit installation. Available in four colour options- Black, White, Grey and Magnolia. Face Reveal Note: The new chain tensioners will be available from January 2014. IMPROVED ELLIPSE BALANCE RAIL The EDGE Technology Hardware System is available with the Ellipse Balance Rail which features a sound proofing bumper and has been designed with perfect weight distribution in mind to ensure fabrics hang very flat. The Ellipse Balance Rail is now available in 10 colours, which includes the original Black, White, Magnolia and Anodized. The new colour options are Gunmetal, Granite, Limestone, Bronze and two exclusive Australian Window Furnishing colours; Dune and Shoji White. Four new end caps have been introduced to stylishly co-ordinate with the Ellipse rail. The internal design of the Ellipse Balance Rail has been re-engineered to improve the finished blind quality. This reduces fabric reworks caused by scratching and stretching as the fabric runs through the balance rail during fabrication. SIMPLY SMARTER BY DESIGN

EDGE Components and Dimensions 7 STANDARD ROLLER SYSTEM 4 6 8 5 3 1 4 COMPONENTS Chain Drive and Idle Components 7 8 2 No Code Description 1 24.7125.XXXX* Chain Drive 1:1 1 24.7124.XXXX* Chain Drive 1.75:1 2 24.7127.XXXX* Chain Drive Cover Plate 3 24.7122.XXXX* 31mm Tube Plug 14 24.7300.7060 Metal Chain Drive 1:1 15 24.7308.XXXX # Metal Chain Drive Cover Plate 16 24.7307.XXXX # Metal Chain Drive Tube Plug 4 24.7121.XXXX* 37mm Tube Adapter 19 24.7128.XXXXA* 50mm Tube Adapter 6 24.7120.XXXX* Idle End System options 14 16 17 4 18 4 15 19 26 20 29 22 21 27 25 28 The Luxaflex Roller Blind Hardware System can be operated with either a chain drive or motor. Each chain operated blind will be supplied with a plastic chain loop however metal or stainless steel chains are available on request. An Ellipse Rail comes standard on all blinds and is available in either anodised finish or you can choose from a selection of popular powder coated colours. 19 Bracket and Tensioner Components No Code Description 7 24.7100.XXXX* Bracket 38mm 7 24.7102.XXXX* Bracket 55mm 8 24.7110.XXXX* Bracket Cover 38mm 8 24.7114.XXXX* Bracket Cover 55mm 20 24.7106.7060 Chrome Bracket 38mm 20 24.7108.7060 Chrome Bracket 55mm 21 24.7116.XXXX # Chrome Bracket Cover 22 24.7118.XXXX # Chrome Bracket Screw Cover 25 24.7193.XXXXA Levelling Bracket 38mm 25 24.7195.XXXXA Levelling Bracket 55mm 26 24.7190.7060A Chrome Levelling Bracket 38mm 26 24.7192.7060A Chrome Levelling Bracket 55mm 27 24.7196.7060A Integrated Leveller Not Shown 24.7197.0000A Integrated Leveller Key Aluminium Tubes and Springs No Code Description 5 24.7200.0000 37mm Tube 17 24.7002.0000 HD 37mm Tube 18 24.7201.0000 50mm Tube 28 24.7202.XXXX^ 37mm Spring 29 24.7203.XXXX^ 50mm Spring XXXX = Available in different options * = Available in White (0155,0199), Grey (0952), Black (1858), Magnolia (4459) # = Available in Grey (0952) and Black (1858) ^ = Available in Right Hand Control (0000) and Left Hand Control (0001) 10 luxaflex.com.au

EDGE Components and Dimensions STANDARD ROLLER SYSTEM Blind Width Cloth Width 38mm Bracket Dimensions 75mm 68mm 55mm Bracket Dimensions 75mm 86mm 18mm 12mm NOTE: Allow an extra 2mm for each end cap. LIMITATIONS Minimum width single blind Minimum width single blind with booster spring Minimum width single motorised blind (switch) Minimum width single motorised blind (RTS) Maximum width single blind Minimum drop single blind Maximum drop single blind STANDARD ROLLER SYSTEM 500mm 750mm 650mm 690mm Please refer to the pricing guide as this is fabric dependent. 300mm Please refer to the pricing guide as this is fabric dependent. SIMPLY SMARTER BY DESIGN

EDGE Components and Dimensions LINKED ROLLER SYSTEM 5 4 39 8 36 4 7 31 3 4 5 4 6 37 1 7 2 8 System options 33 30 32 34 35 Linked Rollers are available with either a straight connector or an aligner connector. Unless otherwise nominated, the blind will always be supplied with the straight connector which ensures the light gap between the linking blinds is minimised (17mm). The optional aligner connector has been designed with special patented technology to assist when installing blinds that may be trickier to line up. Linked Blind Components No Code Description COMPONENTS 30 24.7134.XXXXA Connector Set (120mm) 31 24.7133.XXXXA Aligner Set (120mm) 32 24.7138.XXXXA Aligner Set (300mm) 33 24.7135.0000 Independent Link Component 34 24.7130.0000A Uni-Joint Component - 90 degree angle 35 24.7131.0000A Uni-Joint Component - 45 degree angle 36 24.7123.XXXXA Tube Plug Connector 37 24.7111.XXXXA Linked Bracket Cover 38mm 37 24.7115.XXXXA Linked Bracket Cover 55mm Not Shown 24.7117.XXXX # Linked Chrome Bracket Cover 39 24.7129.XXXXA Idle End (Locking Ring) XXXX = Available in White (0155), Grey (0952), Black (1858), Magnolia (4459). # = Available in Grey (0952) and Black (1858) only. 12 luxaflex.com.au

EDGE Components and Dimensions LINKED ROLLER SYSTEM System Width Blind Width Tube/Cloth Width Blind Width Tube/Cloth Width 18mm See Below 17mm * Please refer to table below for light gap variations based on different options. LIGHT GAPS & LIMITATIONS LINK OPTIONS FIRST LINK 2ND LINK Straight connector 17mm 22mm Straight connector w/spring 22mm 22mm Aligner Connector 24mm 28mm Aligner Connector w/spring 28mm 28mm Independant Link 24mm 32mm Independant Link w/spring 32mm 36mm Note: Braket cover will increase light gap by 2mm on each end. LIMITATIONS Maximum number of linked blinds 3 Note: For Bay windows there is also a 45 and 90 degree angle linking system. We recommend that the brackets for these blinds are installed before measuring the opening width for an order. SIMPLY SMARTER BY DESIGN

EDGE Components and Dimensions HEADBOX SYSTEM 955_1.dxf 48 42 41 4 6 5 42 48 3 4 44 45 1 40 47 43 9 11 44 10 11 COMPONENTS HEADBOX COMPONENTS 46 System options 49 50 The contemporary headbox system has been designed to provide a simple slim line profile whilst at the same time maximising the drop capacity for your roller. The headbox is available in both anodised finish or a choice of powder coated colours (white, black or magnolia). In situations where you require additional light control, a matching one piece side channel system is available and easy to install. No Code Description 40 24.7209.XXXX H-Box Front Plate 41 24.7208.XXXX H-Box Back Plate 42 24.7212.XXXX H-Box Endcaps Square 43 24.7146.XXXXA Chain Outlet Set 44 24.7207.XXXX Side Channel 45 24.7168.XXXXA Side Channel Top Insert 46 24.7169.XXXXA Side Channel Bottom Set 47 24.7163.0000A Side Channel Fixing Set (Metal) 48 24.7362.1858 H-Box Bracket Fascia Components 49 24.7008.XXXX Fascia Plate 50 24.7210.XXXX Fascia Bracket 42 24.7212.XXXX H-Box Endcaps Square 48 24.7362.1858 H-Box Bracket Ellipse Bottom Rail Components 9 32.379.200 Double Sided Bottom Rail Spline 10 24.7218.XXXX # Ellipse Bottom Rail 11 32.455.XXX Bottom Rail End Caps XXXX = Available in White (0155), Grey (0952), Black (1858), Magnolia (4459). XXX = Available in Clear (155), Black (855), Granite (460), Limestone/Dune (461), Gunmetal (462) Bronze (465). #= Available in ten different colour options. 14 luxaflex.com.au

EDGE Components and Dimensions HEADBOX SYSTEM Blind Width Tube/Cloth Width Headbox Dimensions 84mm 89mm Side Channel Dimensions 21mm 15mm 26.8mm 16.8mm 26.8mm 63.5mm LIMITATIONS HEADBOX CAPACITY 37mm Tube (Blind Width < 2600) Fabric Thickness < 0.55mm 3.3m drop Fabric Thickness < 0.75mm 2.8m drop 50mm Tube (Blind Width > 2600) Fabric Thickness < 0.55mm 2.4m drop Fabric Thickness < 0.75mm 1.9m drop SIMPLY SMARTER BY DESIGN

EDGE Components and Dimensions DUAL ROLLER SYSTEM 4 5 51 4 4 1 5 2 1 4 STANDARD BRACKET OPTIONS REVERSE BRACKET OPTIONS 2 51 System options 51 52 Two Dual Bracket systems are available. The standard roll bracket has been designed to keep your blind skins as close to the window as possible, whilst the reverse roll bracket provides a self pelmet effect and is ideal for use with fabrics that have a neutral toned backing. Blinds can be installed using either same side or opposite end controls. COMPONENTS Dual Bracket Components No Code Description 51 24.7363.XXXX Std Roll Dual Bracket 52 24.7364.XXXX Rev Roll Dual Bracket XXXX = Available in White (0155), Grey (0952), Black (1858), Magnolia (4459). 16 luxaflex.com.au

EDGE Components and Dimensions DUAL ROLLER SYSTEM DUAL ROLLER DIMENSIONS Blind Width Tube Width Standard Roll Bracket 99mm 160mm Reverse Roll Bracket 92mm 155mm 18mm 12mm NOTE: Bracket cover will increase light gap by 5mm. Minimum width single blind DUAL ROLLER SYSTEM 500mm LIMITATIONS Minimum width single blind with booster spring Minimum width single motorised blind (Switch) Minimum width single motorised blind (RTS) Maximum width single blind Minimum drop single blind Maximum drop single blind Maximum drop dual bracket 750mm 650mm 690mm Please refer to the pricing guide as this is fabric dependent. 300mm Please refer to the pricing guide as this is fabric dependent. 3,000mm SIMPLY SMARTER BY DESIGN

EDGE Components and Dimensions 59 HEAVY DUTY ROLLER SYSTEM 58 57 64 61 60 59 63 58 57 55 61 65 53 54 56 59 COMPONENTS 60 System options 62 61 The LUXAFLEX Heavy Duty Roller Blind Hardware System can operate large blinds up to 3800mm in width and 5500mm in drop with a wide selction of motors. The heavy duty system is available in either 55mm or 75mm heavy duty bracket options. Drive and Idle Components No Code Description 53 24.7355.0952A HD Bracket Adapter 54 24.7371.0005A HD Motor Plate 55 24.7378.1858 Motor Adaptor Kit 65mm Hd M50 56 24.7326.0000 65mm Tube Drive Adaptor Not Shown 24.7361.0000 65mm Tube Crown Adaptor Not Shown 24.7354.0000A Motor Adaptor Kit 65mm Somfy 50 58 24.7311.XXXXA HD 65 Idle End Adjustable Aluminium Tube & Bracket Components 57 24.7060.0000 65mm TUBE 59 24.7390.1858 HD Bracket 55mm Black Not Shown 24.7302.1858A HD Bracket 75mm Black 60 24.7304.XXXXA HD Bracket Cover 55mm Not Shown 24.7306.XXXXA HD Bracket Cover 75Mm Black 61 24.7398.1858A HD Bracket Screw Cover Black 62 24.7344.7060A HD Integrated Leveller Linked Blind Components 63 24.7323.XXXXA HD Aligner Set 64 24.7316.XXXXA HD Tube Plug Connector 65 24.7305.XXXXA HD Bracket Cover 55mm - Linked Not Shown 24.7397.XXXXA HD Bracket Cover 75mm - Linked XXXX = Avaliable in White and Black 18 luxaflex.com.au

EDGE Components and Dimensions HEAVY DUTY ROLLER SYSTEM Blind Width System Width Blind Width 55mm Bracket Dimensions Tube/Cloth Width Tube/Cloth Width 90mm 100mm 75mm Bracket Dimensions 90mm See below 39mm 17mm * Please refer to table below for light gap variations based on different options. 120mm LIGHT GAPS & LIMITATIONS MOTOR TYPE HDQ/HDQ65/HDR/HDR65/SR/SS SR65/SS65 LIGHT GAP 23mm 25mm Note: Bracket cover will increase light gap by 2mm on each end LIMITATIONS Maximum Number of Links 3 Minimum Width Single Blind Maximum Width Single Blind Minimum Drop Single Blind Maximum Drop Single Blind 1000mm 3800mm 300mm 5500mm SIMPLY SMARTER BY DESIGN

EDGE Measuring Deductions Guide To simplify the ordering process, all measuring deductions will be made automatically in the factory. All you need to do is enter the size of the opening you wish your blind to cover on the order form. The exception to this is 90 degree corners and bay windows. Corners NOTE: FOR WINDOWS IN REVEAL, BRACKETS MUST BE CEILING FIXED FOR DEDUCTIONS TO WORK. BACK EDGE FRONT EDGE ON FACE Deductions are only approximate due to thickness of fabric and drop. For best results, install the thru blind then measure for the butt blind. Corners in reveal- front edge Through Blind Butt Blind Corners in reveal- back edge Through Blind Butt Blind Corners on face 38mm projection bracket 55mm projection Bracket Deductions +50mm(from corner) - 0mm Deductions - 0mm - 60mm (37mm Tube) - 80mm (50mm Tube) Deductions (butt blinds) - 75mm - 90mm Bays TOP FIX BACK EDGE TOP FIX FRONT EDGE Bays in reveal Deductions Front edge of reveal - 0mm - 0mm - 0mm Back Edge of reveal - 22mm - 44mm - 22mm ON FACE Bays on face Deductions 38mm projection Bracket - 28mm - 56mm - 28mm 55mm projection Bracket - 33mm - 66mm - 33mm Angled Linked Blinds - Bay Window FACE FIT MEASURE WALL Brackets to be fixed to wall Angled Link Bay on Face Deductions 38mm projection Bracket - 38mm - 76mm - 38mm 55mm projection Bracket - 43mm - 86mm - 43mm CEILING FIT FRONT EDGE of reveal Angled Link bay in reveal Deductions Front Edge of reveal - 10mm - 20mm - 10mm *gap between brackets 30mm approximate Angled Linked Blinds - 90 Corners FACE FIT Angled Link Corners on Face Measure blinds into the corner and deduct 76mm from each blind. CEILING FIT FRONT EDGE of REVEAL Angled Link Corners in Reveal Measure from the front edge of reveal and deduct 10mm from each blind. In all corner linked situations, we strongly recommend that the brackets are fixed in exact location first and then measured outside edge to outside edge of the bracket to ensure the gap is minimised. *Gap between brackets 30mm approximate 20 luxaflex.com.au

EDGE Heavy Duty Measuring Deductions Guide ARCHITRAVE & REVEAL WIDTH -0 WIDTH -0 DROP -0 TO SILL -0 PAST SILL -0 TO FLOOR -0 OUTSIDE FACE MIN WIDTH +130 65 65 90mm 82 82 +90 99 88 119 88 BRACKET HD55 BRACKET HD75 CORNERS Note: For windows in reveal, brackets must be ceiling fixed for deductions to work. BACK EDGE FRONT EDGE ON FACE Corners in Reveal- Front Edge Deductions Through Blind +70mm(from corner) Butt Blind - 0mm Corners in Reveal- Back Edge Deductions Through Blind - 0mm 55mm Butt Blind - 95mm 75mm Butt Blind -110mm Deductions are only approximate due to thickness of fabric and drop. For best results, install the thru blind then measure for the butt blind. Corners on Face 55mm Butt Blind 75mm Butt Blind Deductions - 105mm - 130mm BAYS TOP FIX BACK EDGE Bays in Reveal Deductions Front Edge of Reveal 55mm HD Bracket - 0mm - 0mm - 0mm 75mm HD Bracket - 0mm - 0mm - 0mm TOP FIX FRONT EDGE ON FACE Back Edge of reveal 55mm HD Bracket - 35mm - 70mm - 35mm 75mm HD Bracket - 40mm - 80mm - 40mm Bays on face Deductions 55mm HD Bracket - 45mm - 90mm - 45mm 75mm HD Bracket - 35mm - 110mm - 55mm SIMPLY SMARTER BY DESIGN

EDGE Dimensions OPERATION TYPE LIMITATIONS (FOR SINGLE BLINDS AND LINKED SYSTEMS) NOTE: These charts have been calculated using a 400gsm fabric and bottom rail weight of 350g per metre on a 50mm tube. They are provided as a recommended guide. For further details please refer to your pricing guide. TUBE CHART Chain Drive 1:1 (3kg max) Chain Drive 1.75:1 & Premium Metal Chain Drive 1:1 (3.7kg max) Chain Drive 1.75:1 W/spring (4.7kg max) Motorised Not recommended 37mm Tube HD37mm Tube 50mm Tube 65mm Tube Not recommended 22 luxaflex.com.au

EDGE Motorisation Luxaflex EDGE Technology Roller Blinds are compatible with all the motorisation options you are most familiar with today. To order any of the motor options below, simply add the order code from the table below in the motorisation column on your order form. EDGE 65 SYSTEM EDGE 50 SYSTEM EDGE 37 SYSTEM MOTOR REMOTE CONTROL SWITCH CONTROL REMOTE CONTROL SWITCH CONTROL REMOTE CONTROL SWITCH CONTROL ORDER CODE HDQ65 FEATURES HunterDouglas - M50Q Advanced Automation Motor, bi-directional communication. SYSTEM USED BATTERY 240V SLEV (12V) EDGE 65 HDR65 HunterDouglas - M50RF Superior EDGE 65 range, modern sleek Remote Control. SR65 Somfy - Atlus 50 RTS motor. EDGE 65 HDS65 HunterDouglas - Quiet 4 wire motor EDGE 65 for switch or home automation SS65 Somfy - LT 50 4 wire motor for switch EDGE 65 or home automation HDQ HunterDouglas - HDQ Advanced Automation Motor, bi-directional communication. EDGE 50 HDR HunterDouglas - HDRF Superior EDGE 50 range, modern sleek Remote Control. SR Somfy - Sonesse RTS motor. EDGE 50 MR Merger - Low Cost remote control EDGE 50 solution. HDS HunterDouglas - Quiet 4 wire motor EDGE 50 for switch or home automation SS Somfy - Sonesse 4 wire motor for EDGE 50 switch or home automation MS Merger - Low Cost 4 wire motor for EDGE 50 switch or home automation SK1 Somfy - Wirefree battery operated. EDGE 37 MR37 Merger - Low Cost 12Volt Remote EDGE 37 Control HDS37 HunterDouglas - Premium Super Quiet motor for switch or home automation. EDGE 37 HDRF MOTORS HDRF is a wireless motor technology. The range of M40RF motors have an integrated radio receiver for simple one plug installation. Motors can be configured and operated from the modern touch sensitive 4 Channel SUITE remote control, or operated from the motor head for quick setup and operation during installation. HDRF uses intelligent bidirectional communication between each motor and the remote control to ensure that operation is always flawless and uninterrupted. HDRF motors have the ability to simultaneously connect to automation systems or be controlled via a wall switch, all from the one integrated motor. SIMPLY SMARTER BY DESIGN

LUXAFLEX Fabric Collection The beautiful Luxaflex Fabric Collection provides you with the ultimate colours and styles from plain to textured weaves, in a range of opacities from light filtering to blockout. Luxaflex Fabrics are designed to suit your light, glare, heat and privacy needs, with a range of low VOC (Volatile Organic Compound) fabrics for those sensitive to the smell of fabrics. Many fabrics are Sanitized treated - for optimal hygiene and treated with DURAGUARD Fabric Protector which effectively repels most stain causing agents. With over 400 fabrics to choose from, choosing the fabric for the Edge roller blind is the determining factor on whether the blinds blends perfectly with the interior space or stands out as a prominent feature. 24 luxaflex.com.au

LUXAFLEX Fabric Collection EASY TO CLEAN AND MAINTAIN Many Luxaflex Fabrics are treated with DURAGUARD Fabric Protector, which effectively repels most stain causing agents with its proven, water based, preventative formula. Your Luxaflex Window Fashions will SUNSCREEN Sunscreen fabrics allow for heat and light control whilst maintaining your view. Perfect for reducing glare and heat in a room exposed to the sun. Layer with blockout fabrics for night time privacy. Resist water stains from rain, moisture and condensation on windows Resist oily stains from spills or fingerprints SHEER Sheer fabrics give daytime privacy and some filtered view-through subject to the texture and weave. Layer with blockout fabrics to give night time privacy. FOR FRESHNESS & WELL BEING IN YOUR HOME Many Luxaflex Fabrics are treated with Sanitized hygiene function, which TRANSLUCENT Translucent fabrics screen out harsh light, but do not allow a view-through. They bring texture or patterns to light coming into a room whilst providing daytime and night time privacy. Keeps odours away ensuring freshness in your home Effectively reduces the development of bacteria odour and mildew keeping your home clean Protects against the development of bacteria ensuring well-being in your home The Sanitized Antimicrobial Protection is free of harmful substances and is recommended by institutions for allergy sufferers BLOCKOUT Blockout fabrics offer the ultimate level of privacy, day and night whilst helping to insulate the room. Blockout fabrics offer room darkening capabilities. Ideal for bedrooms and home theatre / TV rooms. SIMPLY SMARTER BY DESIGN

EDGE Product Installation INSTALLATION - STANDARD ROLLER SYSTEM a b d c 1 1. Fix bracket using the screws of your choice 2. Place the chain drive in the bracket (1) click 2 3. Slide it down until it clicks (2). 4. Place the tube adapter on the chain drive. Press the idle end and lift the blind. click 5. Snap it to the bracket. Slide the end caps onto the brackets. 26 luxaflex.com.au

EDGE Product Installation REMOVAL - STANDARD ROLLER SYSTEM 1 2 1. Slide a screw driver between idle end and the bracket and then lever the idle end out of bracket while holding blind. 2. Move the blind down and out of the bracket. Blind will disengage from chain drive. 3. In face, push the pin of the chain drive and take the chain drive out of the bracket. OR In reveal, place a screw driver under the pin of the chain drive and pull it outwards. Take the chain drive out of the bracket. INSTALLATION - STANDARD ROLLER WITH OPTIONAL LEVELLER 1. Make sure that the opening for the Allen key is pointing downwards before installing the brackets. Change the orientation by loosening the 2 screws and turning the leveller 90. Fix the screws. 2. To adjust skewing, put the provided Allen key into the screw of the leveller and turn it left or right to move the blind up or down. SIMPLY SMARTER BY DESIGN

EDGE Product Installation INSTALLATION - LINKED BLINDS 1. Place the tube adaptor on the chain drive head. Press the idle end and lift the blind. 2. Fix the outer bracket with the screws provided. 3. Slide linked bracket cover over bracket. Slide the connector part through the bracket into the idle end. 4. Place the tube adaptor on the aligner or connector head. 2 1 click 2 1 3 5. Press the spring loaded idle with locking ring end and lift the blind and snap it to the bracket. 6. To align the bottom rails, push the blind against the idle end (1), turn the blind, level the bottom rail with the other one (2). Release to fix the position (3). NOTE: This is not possible when using the standard straight connector set. 7. Secure the blind by turning the locking ring on the idle end to prevent it from contracting. Slide the end caps onto the brackets. REMOVAL - LINKED BLINDS 1. Unfasten the locking ring. Slide a screw driver between locking ring and bracket then push the idle end in the aligner direction. 2. Move the blind down and out of the bracket. Pull the aligner or connector out of the idle end. 28 luxaflex.com.au

EDGE Product Installation INSTALLATION - UNI JOINT BLINDS 1. Install the main blind with the linked end cap. 2. Slide the 45º - 90º joint through the bracket into the idle end. X 3. Place the inner bracket with the linked end cap horizontally to the bracket of the main blind and fix it with the screws provided. 4. The maximum distance between bracket and cardan joint is X = 40 mm. 5. Fix the outer bracket with the screws provided. 6. Slide the idle end onto the hexagon of the 45º - 90º joint. NOTE: Level the bottom rail with the other before installation. 2 1 click 7. Slide the idle end onto the hexagon of the 45º - 90º joint. NOTE: Level the bottom rail with the other before installation. 8. Fix the blind by turning the locking ring (on both sides) against the idle end. Slide the end cap onto the bracket. > 45 9. Loosen the screw from the stopper (90º joint). The angle between the hexagon and the cardan should not exceed 45º. The axes of the blinds should cross in the middle of the cardan. Fix both stoppers when using 90º joint. SIMPLY SMARTER BY DESIGN

click EDGE Product Installation INSTALLATION - HEADBOX SYSTEM 1. Fix headbox back plate to wall by drilling through extrusion and slide brackets into keyway. 2. Slide end caps into the headbox back plate. 3. Clip headbox front plate inside keyway at the top of the back plate. NOTE: End cap removed for demonstration only. 4. Clip headbox front plate into place to secure the endcaps. INSTALLATION - SIDE CHANNELS ON FACE X = max. 500 mm 1. Level the side guiding channel flush with the headbox end cap. Mark this position. 2. Fix the lower clip - and clips at 500 mm intervals - before installing the channel. 3. Place the bottom rail into the side guiding channel. 4. Snap channel into clips. In reveal installations, screw straight through the side channel. 30 luxaflex.com.au

EDGE Product Installation INSTALLATION - HEAVY DUTY ROLLER BLIND SYSTEM b a click c 1. Fix the bracket with the screws provided a) recess b) ceiling c) wall 2. Slide the cover cap onto the bracket until it snaps. The fasteners of the bracket ring must be open. 2 1 2 1 click 3. Place the blind with the bearing onto the bracket. Push the blind against the bearing and lift the blind up until the motor front plate fits the bracket ring. 4. Turn the blind (10 ) in the rolling off direction and close both fasteners of the bracket ring. Make sure that limit switches are accessible. click 5. Fix the blind by turning the locking ring against the bearing. 6. Slide the end caps onto the brackets. Make sure that the end caps snap onto the brackets. INSTRUCTIO 7. Connect the motor and controls in accordance with separately provided instructions. SIMPLY SMARTER BY DESIGN

EDGE Product Installation REMOVAL - HEAVY DUTY ROLLER BLIND SYSTEM 1. Disconnect the motor. Lift the backside of the end cap and slide it towards you. 2. Unfasten the locking ring. 1 2 2 1 3. Open both fasteners of the bracket ring. 4. Turn the blind in the roll up direction until the front plate gets out of the bracket ring. 5. Push the blind against the bearing and slide it out of the bracket. INSTALLATION - HEAVY DUTY LEVELLER 1. Change the orientation to ensure that the opening for the Allen key is pointing downwards before installing the brackets. 2. Fix the leveller with the screws provided. 3. To adjust skewing, put the provided Allen key into the screw of the leveller and turn it left or right to move the blind up and down. Support lifting of large heavy blinds with the palm of your hand. 32 luxaflex.com.au

EDGE Product Installation INSTALLATION - HEAVY DUTY LINKED BLINDS 1. Install the main blind with the coupling end cap. 2. Fix the outer bracket with the screws provided. Slide the cover cap onto the bracket until it snaps. 3. Slide the aligner or the connector through the bracket into the idle end. 4. Only for coupling with 2 intermediate brackets! Fix the inner bracket with the screws provided. Slide the aligner through the bracket into the bearing. 5. Place the tube adapter on the aligner or connector head. 6. Press the bearing, lift the blind and snap it to the bracket. 7. To align the bottom rails: (1) push the blind against the bearing. (2) turn the blind, level the bottom rail with the other one. (3) release to fix the position. click 9. Fix the blind by turning the locking ring against the bearing. 10. Slide the end cap onto the bracket. Make sure that the end cap snap onto the bracket. SIMPLY SMARTER BY DESIGN

EDGE Product Installation REMOVAL - HEAVY DUTY LINKED BLINDS 1. Lift the backside of the end cap and slide it in your direction. 2. Unfasten the locking ring. Slide a screw driver between locking ring and bracket and push the bearing in the aligner direction. 3. Move the blind downwards out of the bracket. Pull the aligner or connector out of the bearing. Copyright 2013 Hunter Douglas Limited [ABN 98 009 675 709] Registered Trade Marks of Hunter Douglas Limited Sanitized and the Sanitized symbol are trademarks of Sanitized AG, Switzerland, registered in numerous countries. Somfy is a registered trade mark of SOMFY Pty Limited 10/2013 34 luxaflex.com.au

5YEAR WARRANTY *Refer to www.luxaflex.com.au for warranty document.

SMARTER BY DESIGN