Trade Catalogue 2012 1st Edition Ladders Steps Podiums Towers Accessories
Introduction Working at Height Regulations The Work at Height Regulations, introduced in 200, apply to all work at where there is risk of a fall liable to cause personal injury. Employers and those that control the work of others are responsible for making sure the Regulations are adhered to. Content Zarges (UK) Limited Providing working at solutions for over 7 years A brief guide to Working at Height Risk Management 1. Work at should be avoided if possible 2. If work at cannot be avoided, use equipment that will prevent a fall. Where risk of a fall cannot be eliminated, use work equipment or other measures that will minimise the distance and consequences of a fall Risk Assessment A risk assessed is a risk reduced. We therefore recommend that you take into account the following criteria when choosing the right access equipment: Height differential, frequency and duration of work, material/tools to be used, complexity of the task to be carried out, number of persons involved, as well as location and environmental factors such as the weather and ground. Selecting the right item of access equipment Ladders and Stepladders Ladders are primarily suited to short-duration tasks (lasting less than 0 minutes) involving low levels of risk. Standards: (10 Kilo load rating), some models also comply with standard BS 207 Class 1 (17 Kilo load rating). Zarges Work s Work platforms are appropriate for longer tasks involving the use of heavy materials or tooling. They bridge the gap between ladders and mobile scaffolds. Standards: Work platforms meet the requirements of the European standards or EN 100 as well as either the French NF or German BGI 67 standard. Mobile Scaffold Towers Ideal for working at high levels, Mobile Scaffolds should be used for tasks involving more than one person and /or use of heavy materials or tooling. Standards: EN 100, Category (load capacity up to 200 kg/m2). Safety and Training All items of access equipment should be regularly inspected by a competent person. In addition workers using access equipment should be properly trained. Further information about Zarges training courses can be found on page. Zarges are accredited members of: Working at Height & Contents 02-0 Zarges Training Academy 0 Combination Ladders 0-12 Extension Ladders 1-18 Step Ladders 19-26 Loft Ladders 27-29 Podiums & Work s 0-8 Mobile Scaffold Towers 9-2 Accessories - 6 Eurobox 7 NEW For 2012 See page 1 Zarges is about Innovation and quality Zarges has stood for innovation and the highest quality in standards for over 7 years. Since our foundation in 19 Zarges has established itself as an expert in the production of aluminium products for industrial applications. ranges Our access equipment range covers everything from step stools, stepladders, extension and combination ladders to access platforms, mobile scaffold towers as well as industrial equipment such as bridging and access stairs. All of our products meet the relevant British or European standards and many carry a ten year manufacturer s warranty. NEW For 2012 See page 1 2HF Principle ( both hands free ) Look for the products with the 2HF logo. These products allow you to work with both hands free, meaning even more convenience and safety when working. Page 02 Tel. 01908 61118 Fax. 01908 68176 Email: sales@zarges.co.uk Web. www.zarges.co.uk Page 0
Zarges Training Academy Combination Ladders Ladder Association Ladder & Step ladder Use Ladder Association Ladder & Step ladder Inspection Course PASMA Standard Mobile Access Tower Learning outcomes: Delegates will learn to select appropriate work at equipment for a task, correctly locate and safely use ladders and step ladders, and inspect ladders and step ladders for damage. Intended for: Operatives and supervisors who require the knowledge and practical skills to work safely with steps and ladders. Learning outcomes: Delegates will gain an understanding of current relevant legislation, be able to thoroughly inspect ladders and stepladders identifying safety critical faults and record equipment details and inspections as outlined in PUWER. Intended for: Managers and supervisors who require the knowledge and practical skills to thoroughly inspect and maintain records of ladders and steps. Learning outcomes: To provide delegates with PASMA certified accreditation for the erection, inspection and dismantling of mobile towers. Intended for: Any employee who erects or inspects mobile towers. Zarges Training Academy provide safety training courses for ladder and access equipment covering the correct usage and inspection of access equipment including ladders, step ladders, towers and scaffolds. PASMA Low Level Access PASMA PASMA for Managers Learning outcomes: To gain the practical skills and theoretical knowledge to safely assemble, dismantle and relocate low level access units without risk of personnel injury to the delegate or others. Intended for: Any person, who assembles, dismantles or relocates prefabricated access units less than 2. metres. Learning outcomes: To gain the theoretical knowledge about the hazards related to mobile access towers, current legislation, regulations and guidance affecting work at using mobile access towers. Intended for: Any person who has responsibility for overseeing the work of operatives on site ensuring that work is properly planned and organised, that those involved in carrying out the work are competent and properly trained, and that towers are correctly inspected and maintained. PASMA Scaffold & low Level Assess Combined Course PASMA Work at Height (Essential) Learning outcomes: To gain the practical skills and theoretical knowledge to safely assemble, dismantle and relocate low level access units without risk of personnel injury to the delegate or others. Intended for: Any person, who may be responsible for the commissioning, assembly, dismantling, relocation and inspection of low-level access units and standard mobile access towers. Learning outcomes: To enable an individual to effectively comply with their duties under the Work at Height Regulations Intended for: Any person who is involved in work at. To receive information on training courses for working at please telephone 01908 61118 or email sales@zarges.co.uk Page 0 Tel. 01908 61118 Fax. 01908 68176
Combination Ladders Combination Ladders Industrial -Part Skymaster TM One ladder with six functions - the original and still the best Two rigid aluminium locking bars for maximum security Top section with pair of guide wheels RATING Top and middle section with rung hook and positive operation locking tab Strong anti-splay nylon restraint straps with sewn-in fixing tab Replaceable stile guides that encompass the whole stile; with plastic inserts for smooth handling Extremely rigid ladder with strong connection between and stiles Replaceable plastic end caps ensure firm positioning without risk of slipping Stabiliser bar included on bottom section 121 122 12 12 x 8 x 10 x 12 x 1 2..00..1 2-part entended *.10.9 6.10 6.9 Note: All measurements in metres *Also known as Free Standing -part entended.80 6.90 8.60 9.70 Skymaster TM Accessories Accessories for probably the best ladder in the World Horizontal stabiliser bar 0.90 1.00 1.10 1.20 Stile dimension 98 x 2 98 x 2 18. 2. 0.1 8. 200 200H 020 021 Description Skymaster : Length: 100mm Width: 20mm (See Fig. 1) Handrail to suit 200 (See Fig. 1) Ladder Stand-off/base stabiliser (See Fig. 1) Universal Ladder Stabiliser bar Fig. 1 Free Standing Position Trestle Ladder Stairwell Position Part Ext. Ladder 2 Part Ext. Ladder Single Ladder Email: sales@zarges.co.uk Web. www.zarges.co.uk Page 07
Combination Ladders Combination Ladders Trade -Part Skymaster TM One ladder with six functions - the original and still the best Rigid aluminium locking bar for maximum security Top and middle section with rung hook and positive operation locking tab Strong anti-splay nylon restraint straps with sewn-in fixing tab Replaceable stile guides that encompass the whole stile; with plastic inserts for smooth handling Extremely rigid ladder with strong connection between and stiles Replaceable plastic end caps ensure firm positioning without risk of slipping Stabiliser bar included on bottom section 0227 1097 0228 1099 0229 020 121 x 6 x 7 x 8 x 9 x 10 x 12 x 1 1.90 2.20 2.0 2.70.00.60.10 2-part entended *.00.60.10.70.9 6.10 6.90 Note: All measurements in metres *Also known as Free Standing -part entended.10.00.80 6.70 6.90 8.60 9.70 Horizontal stabiliser bar 0.7 0.7 0.80 0.8 0.90 1.00 1.10 Stile dimension 68 x 2 68 x 2 98 x 2 98 x 2 1.8 1.0 17. 20.0 2. 28.8 6. Fibreglass -Part Skymaster TM Ideal combination ladder for electrical contractors Rigid aluminium locking bar for maximum security Top and middle section with rung hook and positive operation locking tab Strong anti-splay nylon restraint straps with sewn-in fixing tab Quality stile guides that encompass the whole stile; with plastic inserts for smooth handling Extremely rigid ladder with strong connection between and stiles NEW For 2012 2-part entended * -part entended GRP121 x 8 2..10.80 Note: All measurements in metres *Also known as Free Standing Horizontal stabiliser bar 0.80 Stile dimension 27. Free Standing Position Trestle Ladder Stairwell Position Part Ext. Ladder 2 Part Ext. Ladder Single Ladder Email: sales@zarges.co.uk Web. www.zarges.co.uk Page 09
Combination Ladders Combination Ladders -Part Telescopic Ladder The complete maintenance ladder - can also be used on stairs -Way Combination Ladder Compact and versatile: ideal for indoor use...... Lean-to, trestle and stair ladder in one Only a few actions needed to convert from one to the other Rung by rung adjustment High strength connection between and stiles Folds down to a compact size for transport The ultimate in versatility Three applications in one: step ladder, lean-to ladder and stairwell ladder Non-slip rubber Wide, splayed base for extra stability D shaped provide a comfortable working angle Sliding mechanism - quick and easy to use "C" section aluminium stiles Width of splayed bottom section: mm Class 1 17 KILO Industrial Telescopic Ladder, Z600 Die-cast aluminium handles Easy to use, automatic aluminium safety hinges 10080 1 x + 1 x 6 1.90 Stepladder top rung 1.6 Extended Length 2.70 Stile dimension 8 x 20 8. Dimensions folded Height to top rung as stepladder Length as lean-to ladder 19 190 191 192 x x x x 6 0.9 x 1.0 x 0.21 0.6 x 1.0 x 0.21 0.6 x 1.8 x 0.21 0.70 x 1.86 x 0.21 - rung / 1. m -7 rung / 1.86 m -9 rung / 2.0 m 6-11 rung / 2.92 m 6-10 rung /.1 m 8-1 rung /.2 m 10-18 rung /. m 12-22 rung / 6. m 10.0 1.0 16.0 20.0 Trade Telescopic Ladder, Z00 Functional, robust hinges with screw fitting; easy to change Economically designed turn and pull handles with plastic coating for easy manoeuvre Dimensions folded Height to top rung as stepladder Length as lean-to ladder Step Ladder Position Ladder Position Stairwell Position 119 119 1196 Accessories 19 x x x 6 0.6 x 1.0 x 0.21 0.6 x 1.8 x 0.21 0.70 x 1.86 x 0.21 Description -7 rung / 1.86 m -9 rung / 2.0 m 6-11 rung / 2.92 m Stile Extension to fit all above models 8-1 rung /.2 m 10-18 rung /. m 12-22 rung / 6. m 1.0 16.0 20.0 Add additional features and benefits to your access equipment with our extensive range of accessories. See pages to 6 for more details Page 10 Tel. 01908 61118 Fax. 01908 68176 Email: sales@zarges.co.uk Web. www.zarges.co.uk Page 11
Combination Ladders Extension Ladders Multi-Purpose Ladder, Z00 Versatile and compact - for an array of tasks Easy to store and transport with four folding sections All sizes can be used as a lean-to ladder As a stepladder it can be ascended from both sides Manufactured from high strength aluminium extrusion High-strength connection between rung and stile External of ladder body: 0mm Fitted with 2 stabiliser bars Optional platform available for 28, 281 & 282 28 281 28 282 28 x 2 x & 2 x x 2 x & 2 x x Dimensions folded (mm) 7 x 1000 x 27 7 x 1210 x 27 7 x 1280 x 27 7 x 190 x 27 7 x 160 x 27 Height as Stepladder 1.7 2.00 2.0 2.0 2.80 Height as work platform 0.99 0.99-0.99 - Length as lean-to ladder.62.19.7.7.86 12. 1.0 1. 1. 20.0 Accessories 0926 0927 092 Description Non-slip aluminium platform to suit 28 Non-slip aluminium platform to suit 281 Non-slip aluminium platform to suit 282 096 090 Description Timber platform to suit 28 Stile extension, up to 7mm ext Page 12 Tel. 01908 61118 Fax. 01908 68176
Extension Ladders Extension Ladders Class 1 Industrial Ladder Extension Ladders with D-shaped Zarges Telemaster One ladder with multiple telescopic options Tested and certified to both BS 207 Class 1 and Large D shaped serrated provide a comfortable horizontal surface during use Box section stiles for extra strength and smooth handling Easy, precise rung-by-rung adjustment Rung hooks and locking tabs secure the sections together during use and transport Replaceable plastic end caps ensure firm positioning without risk of slipping High strength, non-twist connection between and stiles CLASS 1 17 KILO RATING RATING Rung by rung adjustment Treads lock automatically during extension Extra wide are comfortable to use Wear resistant with anodised stiles Fits easily into car boot or cupboard rating 10kg (2.6 stone) NEW For 2012 Two-Part Extension Ladder Overall of bottom section: 20mm 980 981 982 98 98 98 2 x 8 2 x 10 2 x 12 2 x 1 2 x 16 2 x 18 2.2 2.98..10.66.22 Extended.82.9 6.06 6.90 8.02 9.2 Stile dimension (mm) 8 x 2 98 x 2 10. 12.6 1.9 17.2 21.0 29. 100600 100601 Accessories Heigth 0.78 0.8 100602 Description Carry Bag Full entended.0.80 Width 0.9 0.1 10.7 1.71 CLASS 1 17 KILO RATING Three-Part Extension ladder Overall of bottom section: 90mm RATING Extended Stile dimension (mm) 988 989 9860 9861 x 8 x 10 x 12 x 1 2.2 2.98..10.22 6.90 8.0 9.98 8 x 2 8 x 2 98 x 2 16.2 21.1 2.0 6.0 For more details about Zarges Telemaster visit: www.zargesteletower.co.uk Page1 Tel. 01908 61118 Fax. 01908 68176 Email: sales@zarges.co.uk Web. www.zarges.co.uk Page 1
Extension Ladders Extension Ladders Single Ladder, Z00 The single ladder that s very light but still extremely stable Industrial Ladder Extension Ladders with square shaped Rungs and stiles made from extruded aluminium Box section side stiles for extra strength and smooth handling Replaceable plastic end caps ensure positioning without risk of slipping High strength, non-twist connection between and stiles Outside : 0mm 17 18 10 12 1 16 18 160 162 16 7 8 10 12 1 16 18 20 22 2 Length 2.21 2.9.0.6.17.7.29.8 6.1 6.98 Stile dimension (mm) 8 x 2 8 x 2 8 x 2 8 x 2 62 x 2 68 x 2 8 x 2.0.. 6.2 7.2 8. 9.7 10.6 12. 1. Comfortable and precise with rung by rung adjustment The sections of the extension ladder can also be used separately as single ladders Rungs & stiles made from extruded aluminium sections Box section side stiles for extra strength and smooth handling Stile guide with plastic inserts for smooth handling Rung hooks and locking tabs secure the sections together during use and transport Replaceable 2-component plastic end caps ensure positioning without risk of slipping and at the same time provide firm seating the stile High strength, non-twist connection between and stiles Two-Part Extension ladder, Z600 A high level of stability thanks to extra wide bottom section (90mm) Wall wheels fitted to ladders of 2 x 16 and above 02 026 027 028 029 021 021 0216 0217 2 x 6 2 x 8 2 x 10 2 x12 2 x 1 2 x 16 2 x 18 2 x 20 2 x 2 1.8 2.9.00.6.07.70.20.7 6.90 Entended 2.9.07.96 6.09 7.21 8. 9.1 10.2 12.22 Stile dimension (mm) 8 x 2 8 x 2 68 x 2 8 x 2 98 x 2 98 x 2 11 x 2 6.0 9.0 12. 17.0 18. 2.0 26. 2.0 0. Three-Part Extension ladder, Z600 Overall of bottom section: 90mm Entended Stile dimension (mm) 0127 0128 0129 x 8 x 10 x 12 2. 2.98.60.80 6.92 8.60 98 x 2 1.1 20.1 2.2 Page 16 Tel. 01908 61118 Fax. 01908 68176 Email: sales@zarges.co.uk Web. www.zarges.co.uk Page 17
Extension Ladders Step Ladders -Part Compact Ladder Light and portable compact ladder - ideal for narrow spaces Large D shaped serrated provide a comfortable working angle "C" shaped aluminium stiles Ribbed feet for extra grip All ladder sections are the same (0mm) Entended Stile dimension (mm) 1008 x 7 2.0.7 70 x 2 10. Industrial Roof Ladder Light and portable - for use on pitched roofs One and two section roof ladders available Strong oval section stiles 00 mm serrated round Ridge hooks with running wheels (100mm diameter) Bearer bars made from 10mm x 6mm aluminium flat bar with PVC coating Entended Number of bearers 10066 10061 10066 10061 10066 100621 100622 1 x 10 1 x 12 1 x 1 1 x 1 1 x 17 1 x 9 + 1 x 10 1 x 11 + 1 x 12 - - - - -.0.00..0.6.9.. 7.27 9.0 10.0 11.0 11. 12. 1.0 1.0 Page 18 Tel. 01908 61118 Fax. 01908 68176
Step Ladders Step Ladders Class 1 Industrial Step High strength stepladder - ideal for regular use Class 1 Industrial Swingback Step The ultimate builders step - high strength for regular use Tested and certified to both BS 207 Class 1 and Patented 7-point connection between tread and stile with reinforcing support rod through the centre of the tread Non-slip, replaceable rubber feet provide firm footing Stand safely on large serrated (8mm deep) Smooth 'box section' stiles that are comfortable to hold - no sharp edges Optimal stability thanks to locking sidebars on both sides Large checker surface platform (17mm x 2mm) - with knee rail for safe and comfortable work at Knee-rail: approx. 600mm above the platform Class 1 17 KILO Tested and certified to both BS 207 Class 1 and Patented 7-point connection between tread and stile with reinforcing support rod through the centre of the tread Non-slip, replaceable rubber feet provide firm footing Stand safely on large serrated (8mm deep) Smooth 'box section' stiles that are comfortable to hold - no sharp edges Optimal stability thanks to locking sidebars on both sides Class 1 17 KILO 967 967 967 9676 9677 9678 9680 9682 6 7 8 10 12 1.2 1. 1.78 2.01 2.2 2.7 2.9.9 0.61 0.8 1.0 1.26 1.8 1.70 2.1 2.6 0.0 0. 0. 0.8 0.0 0. 0.7 0.62 spread 0.70 0.8 0.99 1.1 1.27 1.1 1.69 1.97 Stile dimension: front / back (mm) 87 x 20 / 0 x 20 87 x 20 / 0 x 20 87 x 20 / 0 x 20 87 x 20 / 0 x 20 87 x 20 / 0 x 20 87 x 20 / 0 x 20 87 x 20 / x 20 87 x 20 / x 20. 6.1 7.1 8.0 8.8 9.7 11.6 1. 960 960 960 9606 9607 9608 9610 9612 6 7 8 10 12 0.7 0.98 1.21 1. 1.68 1.89 2.6 2.82 Open 0.6 0.87 1.08 1.0 1.1 1.7 2.16 2.60 0.0 0. 0. 0.8 0.0 0.2 0.7 0.62 spread 0.2 0.66 0.80 0.9 1.10 1.2 1. 1.82 Stile dimension: front / back (mm) 87 x 20 / 0 x 20 87 x 20 / 0 x 20 87 x 20 / 0 x 20 87 x 20 / 0 x 20 87 x 20 / 0 x 20 87 x 20 / 0 x 20 87 x 20 / x 20 87 x 20 / x 20..2.1.9 6.9 8. 10.2 1.0 Page 20 Tel. 01908 61118 Fax. 01908 68176 Email: sales@zarges.co.uk Web. www.zarges.co.uk Page 21
Step Ladders Step Ladders Light Trade / Domestic Step, Z200 Light and portable - ideal for tradesman Large, non-slip serrated platform High-strength Perlon straps prevent splay - fitted on 6, 7 & 8 tread models Firm positioning thanks to anti-slip plastic end caps Flanged cross-struts on the support part 1 1 1 16 17 18 6 7 8 1.2 1.6 1.69 1.92 2.16 2.9 Professional Step 0.7 0.77 0.98 1.19 1.0 1.62 spread Sturdy step ladder with twin handrails and large platform Extra deep for comfort and safety Extra large standing platform Twin handrails with safety grips *8 Tread model is BS207 Class 1 only 10088 10088 10088 100886 100887 100828* 6 7 8 1.2 1.66 1.88 2.10 2.0 2.72 0.7 0.80 1.02 1.26 1.7 1.79 Page 22 Tel. 01908 61118 Fax. 01908 68176 0.0 0. 0.6 0.8 0.0 0. 0. 0.6 0.9 0.1 0. 0.8 0.60 0.7 0.88 1.0 1.17 1.1 spread 0.81 0.96 1.10 1.26 1.1 1.6 2.9.7.. 6.1 7..0.8 6. 7. 9.0 9.7 Anodised Trade Step, Z600 Anodised stiles for cleaner hands Stiles with smooth anodised finish - for clean hands Stand without fatigue on 80mm deep Solid safety platform of diecast aluminium (20mm x 20mm) Spacious aluminium storage tray for materials and tools Triple riveted connection between and stiles Non-slip plastic end caps Treads and stiles made from extruded aluminium sections High-strength Perlon straps prevent splay, fitted on all models of or more 122 122 122 1226 1227 1228 120 6 7 8 10 1.1 1.6 1.88 2.12 2.6 2.60.07 0.67 0.88 1.10 1.2 1. 1.76 2.20 Anodised Double Sided Step, Z600 Anodised stiles for cleaner hands Stiles with smooth anodised finish - for clean hands Stand without fatigue on 80mm deep Triple riveted connection between and stiles High-strength Perlon strap prevents splay Treads and stiles made from extruded aluminium sections Non-slip plastic end caps and galvanised steel hinges 126 126 126 1266 1267 1268 1270 2 x 2 x 2 x 2 x 6 2 x 7 2 x 8 2 x 10 0.72 0.96 1.20 1. 1.68 1.92 2.9 Open 0.66 0.88 1.10 1.2 1. 1.76 2.20 0. 0. 0.8 0.0 0. 0. 0.60 0. 0.6 0.8 0.1 0. 0.6 0.61 spread 0.69 0.8 0.98 1.1 1.28 1. 1.7 spread 0.66 0.8 1.02 1.20 1.8 1. 1.91 Stile dimension: front / back (mm) 2 x 2 / 2 x 2 2 x 2 / 2 x 2 2 x 2 / 2 x 2 2 x 2 / 2 x 2 8 x 2 / 2 x 2 8 x 2 / 2 x 2 8 x 2 / 2 x 2 Stile dimension: front / back (mm) 2 x 2 2 x 2 2 x 2 2 x 2 2 x 2 8 x 2 8 x 2.7..1.9 7.0 8. 10.1.2.1.1 6.1 7.2 9.0 12. Page 2
Step Ladders Step Ladders Master Step, Z600 The safer stepladder with a wide platform and base Large work platform with aluminium checker plate surface (00mm x 00mm) 80mm deep with integrated plastic inserts offer maximum anti-slip protection Extra wide base provides for additional stability Practical aluminium storage tray for small items and tools With two handrails as standard for safe access Optimum stability thanks to two high-strength Perlon straps for preventing splay High-strength connection between tread and stile Treads and stiles made from extruded aluminium sections Extra high knee-rail (82cm above platform) 162 16 16 077 078 079 16 Mobile Master Step, Z600 Spring loaded castors for ease of movement on back wheels Two side locking bars to prevent the step collapsing in use /during movement Special order option: spring loaded castors on each leg - swivel or fixed 162 16 16 077 078 079 16 6 8 10 12 6 8 10 12 1.86 2.1 2. 2.71.27.8.9 1.86 2.1 2. 2.71.27.8.9 0.79 1.0 1.2 1.8 2.07 2.9.11 0.79 1.0 1.2 1.8 2.07 2.9.11 0.60 0.62 0.6 0.68 0.7 0.80 0.86 0.60 0.62 0.6 0.68 0.7 0.80 0.86 spread 0.90 1.07 1.2 1.2 1.77 2.1 2.8 spread 0.90 1.07 1.2 1.2 1.77 2.1 2.8 Stile dimension: front / back (mm) / 8 x 2 / 8 x 2 / 8 x 2 / 8 x 2 / 8 x 2 / 8 x 2 / 8 x 2 Stile dimension: front / back (mm) / 8 x 2 / 8 x 2 / 8 x 2 / 8 x 2 / 8 x 2 / 8 x 2 / 8 x 2 EN11.8 6.6 7. 9. 11.1 1.9 20. 7.8 8.6 9. 11. 1.6 1.9 2.0 GRP Step, Z600 The ideal step ladder for electrical contractors Glass reinforced polyester stiles: effective insulation and eliminated spark risk 80 mm deep aluminium alloy with non-slip serrated surface Safety platform (approx. 20mm x 20mm) Safe storage of accessories and tools in an aluminium storage tray Only 8.8cm wide when closed - Ideal for limited storage applications 01 02 0 0 0 6 7 1.9 1.6 1.89 2.1 2.9 GRP Swingback Step 0.68 0.91 1.1 1.7 1.60 0.0 0.2 0. 0.7 0.9 Spread (mm) Ideal for use near electrical hazards...... The ideal stepladder for electrical contractors Non-conductive: glass reinforced polyester stiles Strong, locking aluminium side arms Non-slip feet Double riveted aluminium 001 001 0016 0017 0018 6 7 8 1.18 1.7 1.78 2.07 2.8 Open 1.0 1. 1.60 1.87 2.1 0.8 0.2 0. 0.8 0.6 spread 0.8 1.0 1.2 1. 1.6 0.71 0.87 1.0 1.20 1.7 Stile dimension: front / back (mm) 80 x 28 / 8 x 0 80 x 28 / 8 x 0 80 x 28 / 8 x 0 80 x 28 / 8 x 0 80 x 28 / 8 x 0.9 6.9 8.0 9. 11.0.7 7.1 8.1 9. 10.7 Page 2 Tel. 01908 61118 Fax. 01908 68176 Email: sales@zarges.co.uk Web. www.zarges.co.uk Page 2
Step Ladders Loft Ladders Steel Step Stool Ideal for accessing low shelves and wall cupboards Large, non-slip rubber for extra safety Smooth handrail surface that is comfortable to hold Non-slip rubber feet Colour grey / black Folds away easily for storage EN 118 Dimensions (mm) Height of top tread Overall 10022 10022 2 1080 x 220 x 1 110 x 10 x 1 0. 0.67 1.02 1.2 0.2 0.2 6. 9. Probat Step Very strong stepladder - ideal for tough environments 0mm diameter stile tubing on front and rear sections Patented extra-large 90mm x 80mm folding platform Large serrated : 100mm deep Non-slip, safety feet Includes integral bucket hook Knee rail / tool tray 700mm above platform 276/00 276/00 276/006 276/007 276/008 276/009 276/010 276/012 6 7 8 9 10 12 1.91 2.16 2.1 2.67 2.92.17.2.9 0.96 1.20 1. 1.67 1.91 2.1 2.8 2.8 0.69 0.72 0.7 0.78 0.81 0.8 0.87 0.9 spread 0.98 1.1 1.0 1.6 1.62 1.78 1.9 2.26 10.8 12. 1. 1. 17.0 19.6 21. 27. Page 26 Tel. 01908 61118 Fax. 01908 68176
Loft Ladders Loft Ladders Tradition Timber Folding Loft Ladder Supplied complete with timber frame and trapdoor Three section timber-folding ladder Two sizes of frame available Trapdoor with mm insulation Rubber seal in trapdoor The stair folds and stores compactly on the trapdoor Smooth underside, no visible fixings 10128 10120 Accessories 10121 1012 10126 Floor to ceiling (mm) 2800 2800 Description For opening size (mm) 1200 x 600 1200 x 700 Optional th extension piece Optional safety handrail Internal loft guardrail/balustrade Lining dimensions (mm) 1190 x 90 x 1 1190 x 690 x 1 Nobody understands working at more than Zarges But if you can t find what you are looking for call us on 01908 61118 or email sales@zarges.co.uk EN 197 Telesteps Loft Ladder The space saving all-in-one loft ladder Space saving solution for access to lofts Rung by rung adjustment with clearly visible levers under each tread Autosteps close down mechanism: only press the two levers Stored loft ladder fits into small hatch space 60927 602 Floor to ceiling (mm) 260 290 20 20 Minimum hatch Opening (mm) 20 x 920-1100* 20 x 600 Tread depth (mm) *Minimum dimensions of loft hatch will depend on choice of model and set ladder A ceiling of 2.6m gives a minimum hatch of 920 mm while a ceiling of 2.9m gives a minimum hatch of 1100mm 90 90 EN 197 Aluminum Sliding Loft Ladder The loft ladder that is available in two or three sections D shaped for maximum comfort Universal stowing pole section model comes with handrail Easy to assemble and fit: comes with instructions * Minimum hatch opening depends on floor thickness 10199 10100 Number of Sections 2 Floor to floor (mm) 21-2692 21-000 For opening size (mm) 81 x 89-6* 81 x 00-6* Minimum loft clearance arc (mm) 710 710 1. 12. EN 197 Minimum storage (mm) 1270 1120 Accessories 10102HAB Description Optional additional handrail to suit both models Page 28 Tel. 01908 61118 Fax. 01908 68176 Email: sales@zarges.co.uk Web. www.zarges.co.uk Page 29
Podiums & Work s Podiums & Work s Telepod The World s first mobile telescopic podium Podium erected in under 2 minutes Telescopic mechanism allows three adjustable platform s Folds down for ease of transportation and storage Easily fits in the back of an estate car or van Spacious platform (600mm x 600mm) offers comfortable workstation 60 fall protection due to lockable guardrails on all four sides Suitable for working for longer periods (over 0 minutes) Entry to platform on both sides due to locking gate Automatically extended stabilisers NEW For 2012 podium can be easily moved due to fold away transport wheels and extending handrail Conforms to European standard EN 100 TP001 0.7 / 0.82 / 0.99 2.7 / 2.82 /.00 Footprint With handrail extended 0.98 (H) x 0.68 (W) x 0. (L) s Folded Down Without handrail extended 0.76 (H) x 0.68 (W) x 0. (L) Max. working s 0.7m platform 110 (W) x 0.7 (L) Max. incl. railing 1.91 Extended 0.82m platform 10 (W) x 0.96 (L) 28. 0.99m platform 1 (W) x 0.96 (L) Email: sales@zarges.co.uk Web. www.zarges.co.uk Page 1
Podiums & Work s Podiums & Work s ZAP Telescopic Work A safe & convenient way to working at from 2.81 to.1m ZAP Master Step The stepladder with safety cage and large standing platform Four sizes available: -, - 7, - 9 and 7-12 Large standing platform 66mm 0 mm, with guard rail and knee bar Easy to operate: rung by rung adjustment based on push-up ladder principle with gravity latch Already complies with without swung-out stabilisers, thanks to horizontal stabiliser bars on both sides Stable according to the requirements of BGI 67 with swung-out stabiliser leg Very easy to erect - handrails and guard rails automatically unfold during erection Compact dimensions when folded, therefore easy to transport and store High-strength connection between and stiles Can be easily maneuvered thanks to pair of wheels, even when erected Replaceable 2-component plastic end caps ensure positioning without risk of slipping Standards: BGI 67 &, 10 kilo rating BG 67 Extra-large work platform (00mm x 00mm) -sided peripheral guardrail for maximum safety Generously sized storage tray for tools and small items of equipment Optimum stability thanks to rigid locking bar on both sides 80 mm deep steps with integrated plastic inserts offer maximum anti-slip protection Compact dimensions when folded with automatically retracting safety guardrail Treads and stiles made from extruded aluminium sections Replaceable 2-component plastic end caps ensure positioning without risk of slipping whilst at the same time provide firm seating in the stile Swing-out ZAP stabilisers available as accessories for increasing stability in accordance with BGI 67 regulations Working max. Stile dimension: front / back (mm) 12 126 127 128 Description Mini ZAP ZAP 1 ZAP 2 Giant ZAP Number of - - 7-9 7-12 s 0.81 / 1.00 / 1. 1.00 / 1.0 / 1.60 / 1.80 1.0 / 1.60 / 1.80 / 2.10 / 2.0 1.80 / 2.07 / 2. / 2.61 / 2.88 /.1 Working, max..80.0.1 Dimensions folded 2.16 x 1.02 x 0.9 2. x 0.81 x 0.9 2.72 x 0.81 x 0.9.28 x 0.81 x 0.9 Maximum footprint 1. x 1.10 1.90 x 2. 2.0 x 2. 2.90 x 2. 28.0.0 8. 0.0 1672 1681 167 167 1676 1677 1678 1679 2 6 7 8 9 1.0 1.68 1.96 2.21 2.9 2.77.0. 0.2 0.79 1.0 1.2 1.8 1.8 2.07 2. 2.2 2.79.0.2.8.8.07. 0.6 0.9 0.62 0.6 0.68 0.71 0.7 0.77 7x2 / 8x2 7x2 / 8x2 7x2 / 8x2 7x2 / 8x2 7x2 / 8x2 7x2 / 8x2 7x2 / 8x2 7x2 / 8x2 9 10 11 1 1 16 17 19 Watch the ZAP Telescopic Work in action. Visit the ZAP website www.zapplatforms.co.uk Handrail folds for easy storage Page 2 Tel. 01908 61118 Fax. 01908 68176 Email: sales@zarges.co.uk Web. www.zarges.co.uk Page
Podiums & Work s Podiums & Work s ZAP Scaffold The telescopic scaffold with minimal closed footprint Large-area work platform 0.0m x 1.9m or 0.60m x 2.0m Advanced guard rail (AGR) safe assembly with double depth guard rails put in place before installing the platform Easy to operate: rung by rung adjustment based on push-up ladder principle with gravity latch Easy adjustment by one person Easily collapsible for transportation and storage Highly mobile and slim enough to pass through doors when erected and collapsed thanks to swivel castors (Order No. 79) Pull-out stabilisers with robust spindles for stability and for levelling out on uneven floor/ground surfaces No ballast weights are required for indoor use Two sizes with adjustment from 1.2m to 2.7m or 1.81m to.m platform Total scaffolding size approximately 1m above platform Standard: EN 100 Class, 200 kg/m 2 Sherpascopic The convenient -adjustable work platform 's anti-cut design significantly reduces the risk of injury when handling the product Guardrail system includes an automatically closing gate, providing the user with 60 protection from falls Height adjustment is based on a gravity latch located at the level of the users hands Stabiliser legs feature a telescopic mechanism that allows them to be used on uneven surfaces; when opened the stabilisers face inwards towards the platform thus optimising its stability during use. Large-area work platform 600mm x 20mm Compact dimensions when folded, therefore easy to transport and store Replaceable 2-component plastic end caps ensure positioning without risk of slipping Prevention of toppling from the front, rear and sides Standard: NF P9-2 certified 79 79 1.2/1./1.81/2.09/2.7 1.81/2.09/2.7/2.6/2.9/.21/. Working max..0.60 Footprint, excl. stabillsier L x W 0.80 x 2.0 1.20 x 2.8 Footprint, stabiliser extended, L x W 1.90 x 2.0 2.0 x 2.8 92 119 227220 227221 227222 to to 6 7 to 9 0.78 to 1.01 1.06 to 1. 1.76 to 2.2 Working max. 2.77 to.00.06 to..76 to.2 2.0 2..20 1.0 to 1.60 1. to 1.90 2.0 to 2.70 Spread 1.8 to 1.6 1.60 to 1.97 2.1 to 2.1 2.1 26.1 1.2 EN 100 Class 200kg/m 2 NF P9 2 Certified Watch the ZAP Scaffold in action. Visit the ZAP website www.zapplatforms.co.uk Page Tel. 01908 61118 Fax. 01908 68176 Email: sales@zarges.co.uk Web. www.zarges.co.uk Page
Podiums & Work s Podiums & Work s Sherpamatic The mobile work platform with stabilisers for maximum stability 's anti-cut design significantly reduces the risk of injury when handling the product Guardrail system includes an automatically closing gate, providing the user with 60 protection from falls Large-area work platform 600mm x 20mm 80mm deep for comfortable access Storage tray for tools and small parts Stable thanks to swing-out stabilisers Compact dimensions when folded, therefore easy to transport and store Replaceable 2-component plastic end caps ensure positioning without risk of slipping Prevention of toppling from the front, rear and sides Standards:,, & 6 tread (NF P9-), 7 tread (NF P9-2) Profort Folding platform with guardrail Lifting gate replaces the previous wire rope, providing the user with 60 fall protection Removable tool tray offers a convenient solution for use in tight spaces or where storage is required 's anti-cut design significantly reduces the risk of injury when handling the product 80mm deep replace the previous model's oval, offering greater comfort for the user Generously dimensioned work platform 00mm x 90mm, allowing the user to operate safely for longer periods Peripheral guardrail for maximum safety and tread version with out-swinging stabilisers Easily and conveniently movable thanks to castors on the support section Compact dimensions when folded, therefore easy to transport and store Standard:, 10 kilo rating 22721 22721 22721 227216 227217 Number of 6 7 0.7 0.9 1.18 1.1 1.6 2.07 2.0 2. 2.80.0 0.79 1.9 1.76 1.9 2.80 spread 1.20 1.8 1.6 1.7 1.9 19.6 20.1 21.8 2. 2. 227212 22721 22721 22721 2 Stabilisers No No Yes Yes 0.1 0.70 0.9 1.16 Working max. 2.1 2.70 2.9.16 dimensions (D x H X L) 0.27 x 1.72 x 0.6 0.27 x 1.92 x 0.6 0.27 x 2.1 x 0.6 0.27 x 2.1 x 0.6 spread 0.9 1.08 1.2 1.0 11. 12.7 1.7 16.8 NF P9 2/ Certified Page 6 Tel. 01908 61118 Fax. 01908 68176 Email: sales@zarges.co.uk Web. www.zarges.co.uk Page 7
Podiums & Work s Mobile Scaffold Towers Aluminium Hop-Up Work A low level sturdy working platform Low-level professional work platform Lightweight and durable Compact when closed Easy to store and transport 10 kg load capacity 10002 0.8 Working approx. 2.8 size 0.60 x 0.0.6 Hop-Up Work Aluminium A low level sturdy working platform Low-level professional work platform Lightweight and durable Compact when closed Easy to store and transport 10 kg load capacity Working approx. size 1000 0.7 2.7 0.60 x 0.60 7. Hop-Up Work Fibreglass A low level sturdy working platform, ideal for electricians... Working approx. size 1000 0.7 2.7 0.60 x 0.670 7.7 Page 8 Tel. 01908 61118 Fax. 01908 68176
Mobile Scaffold Towers Mobile Scaffold Towers Teletower The World's first telescopic mobile scaffold tower Telescopic mechanism allows seven different platform s from 0.m to 2.00m Working s from 2.0m to.00m Large folding aluminium work platform (1.m x 0.7m) with climb through hatch Fully erected in under minutes, saving down time & man hours Can be transported in a small van or estate car Single person operation Minimal product footprint for ease of transportation & storage Operates as a podium with low level fixed options of cm & 61cm Comprises only two parts - tower and platform (no more leaving parts in the yard!) Integral stabilising legs with optional positions & lockable castors Integral telescopic hand & knee rails Integral platform stabilisers & conforms to EN 100 Fibreglass Teletower The World's first telescopic mobile scaffold tower in fibreglass Telescopic mechanism allows seven different platform s from 0.m to 2.00m Working s from 2.0m to.00m Large folding aluminium work platform (1.m x 0.7m) with climb through hatch Fully erected in under minutes, saving down time & man hours Can be transported in a small van or estate car Comprises only two parts - tower and platform (no more leaving parts in the yard!) Minimal product footprint for ease of transportation & storage Operates as a podium with low level fixed options of cms & 61cms Integral stabilising legs with optional positions & lockable castors Integral telescopic hand & knee rails Single person operation Integral platform stabilisers & conforms to EN 100 Description Includes Toeboards s Max. working Maximum including railing Description Includes Toeboards s Max. working Maximum including railing TT002 Aluminium Yes 0./0.61/1.00/1.2/1.0/1.7/2.00.00 2.9 9.0* TT00 Fibreglass Yes 0./0.61/1.00/1.2/1.0/1.7/2.00.00 2.9 61.0. * Includes Tower kg, 1kg, Wheel Set 8kg & Toe Boards kg Access All Areas with The ZAP Range of Mobile Podiums & Work s Watch these in action visit: www.zapplatforms.co.uk Left to Right: ZAP Work See page 2 ZAP Master Step See page ZAP Scaffold See page Page 0 Tel. 01908 61118 Fax. 01908 68176
Mobile Scaffold Towers Accessories Speedy 80 Tower Lightweight trade tower supplied in module packs Working s up to 7m Easy to use locking braces and guardrails Stabilisers included at.m platform and above Folding base for speedy erection size: 1.1m x 0.m Outside dimensions excluding stabilisers: 1.78m x 0.78m Scaffolding category (load capability up to 200 kg / sqm) to EN 100 EN 100 Class 200kg/m 2 Speedy100T Speedy200T Speedy0T Speedy00T 0.9 1.80.0.1 Working max. 2.9.80.0 7.1 Individual Packs 20811 20812 2081 2081 Description Pack 1 Pack 2 Pack Pack Pack combinations 1 1 + 2 1 + 2 + 1 + 2 + + Accessories 20721 Description 26.0. 6.2 8.7 Adjustable leg set (set of ) See page for PASMA training courses 0.9m 1.80m.1m Page 2 Tel. 01908 61118 Fax. 01908 68176
Accessories Accessories Adjustable Safety Legs Important stability device for ladders & steps: increases footprint during use Universal Stabiliser Bar Retro fitting horizontal stabiliser bar Bolt safely to the side of any box section ladder or step ladder Simple and safe twist to lock mechanism Self-leveling feet for uneven surfaces Easy to use, retro-fitting safety device Legs clamp flush to the stile when not in use - requires virtually no extra storage space 10000 10001 10002 To suit - 8 tread step ladders 10-12 tread step ladders 2 & part extension ladders 0.90 1.20 2.1 Max extended 1.60 2.20.08 1.6 2.2.0 Ladder Stopper Heavy-duty aluminium "T" shaped plate: holds the ladder in position Can be used by single ladder user, a second person is not required to 'foot' the ladder Stopper base covered with heavy-duty rubber covering: grips ground securely 100018 10002 10006 Width 18 inch. / 7 mm 2 inch. / 609 mm 6 inch. / 91 mm Suitable for ladder : 16 inch. / 06 mm 22 inch. / 8 mm inch. / 86 mm Suitable for ladder type DIY / trade Industrial Industrial For box section stiles: 2mm, up to 98mm depth Adds stability to ladders with straight stiles With two rubber end caps Quick and easy to fit 021 Ladder Stand-off / Stabiliser The extra wide ladder stand-off Fixed to the ladder with two brackets Non-slip end caps Positions the ladder away from the wall making a multitude of tasks safer and easier 020 Spread 1.2 Length 1.0 Stand off, approx. 0. For box section stiles (mm) 2 x 2-98 For box section stiles (mm) 8-11 Safety Foot (Single) For box section stiles 8mm x 2mm and above Use as a ground spike when folded up Ground Spikes (Pair) For ladder stiles 0-11 x 2mm Also suitable for horizontal stabilisers Stile Extension To compensate for different s Adjustment range max. 7mm 0226 099 0911 091 0912 091 For box section stiles (mm) 8-0 8 62 68 091 0916 0917 For box section stiles (mm) 7 8 98 Page Tel. 01908 61118 Fax. 01908 68176 Email: sales@zarges.co.uk Web. www.zarges.co.uk Page
Accessories Also from Zarges Ladder Stay Stand-off approximately 0cm Ladder Provides safe additional standing area Eurobox Solutions for packaging, storage & transporation 000 Roof Rack Clamps (Pair) Includes Padlocks 0980P Paint Tray Ideal accessory for holding work essentials 0270 0900 Roof Hook & Wheels To convert ladders for use on roofs 0970 Foam Ladder Cover (Pair) Protects ladder stiles 10007 Stackable aluminium universal container Lid with stainless steel hinge, two lid restraint straps and all round seal Blue stacking corners of impact-resistant plastic Edge, lid and base profile frames made from solid profile sections Profile-section joints fully welded Cornerbeads for additional dimensional stability Snap fasteners. Can be secured with a plug lock, lead seals, spring retention feature or a padlock (max. Shackle diameter 6mm) Ergonomic heavy-duty sprung drop handles Clearance through body rim extrusion approx. 0mm less than internal dimension 0700 0701 0702 070 070 070 0706 0709 0710 Internal dimenions (L x W x H, approx. mm)* 0 x 20 x 10 0 x 0 x 220 0 x 0 x 10 0 x 0 x 80 70 x 0 x 10 70 x 0 x 80 70 x 0 x 80 110 x 70 x 80 110 x 20 x 220 * Internal dimensions are wall to wall External dimenions (L x W x H, approx. mm)* 00 x 00 x 0 600 x 00 x 20 600 x 00 x 0 600 x 00 x 10 800 x 00 x 0 800 x 600 x 10 800 x 600 x 610 1200 x 800 x 10 1200 x 00 x 20 Volume approx. 27 2 60 7 81 17 29 1 6.0.7.9.2 6.1 7. 8.9 1.0 6. Ladder Mat Four mats made from heavy-duty rubber matting Stile Extension for Stabiliser Bar Continuous adjustment to a maximum 7mm 100101 092 Page 6 Tel. 01908 61118 Fax. 01908 68176 Email: sales@zarges.co.uk Web. www.zarges.co.uk Page 7
Ladders Steps Podiums Towers Accessories Zarges (UK) Limited 8 Holdom Ave Saxon Park Industrial Estate Milton Keynes MK1 1QU Trade Catalogue 2012 Edition 1 Tel. 01908 61118 Fax. 01908 68176 Email. sales@zarges.co.uk Web. www.zarges.co.uk Dealer Stamp Zarges reserve the right to make modifications or change product details without notice. All dimensions and weights are approximate