Part No. AJS & MATCHLESS GEARBOX & CLUTCH - NEW PARTS Price (20% VAT) Price (excl VAT) Tool for adjusting clutch spring nuts (heavier duty than 017254 spanner) 5.00 4.17 017254 Spanner, single end, dynamo chain and clutch spring adjustment 6.75 5.63 RTK-1 000594 Eye-bolt for front chain adjustment, Pre-49 singles, 1949-55 twins, 1958-on CS singles 7.60 6.33 (x2) 013987 Eye-bolt for front chain adjustment, 1949-55 singles 8.75 7.29 022595 Bolt, for front chain adjustment, 1956 singles 4.50 3.75 022596 Bolt, for front chain adjustment, 1956 twins 3.00 2.50 023259 Bolt for front chain adjustment, 1957-on twins 3.15 2.63 022869 Bolt, for front chain adjustment, 1957-on road singles 4.60 3.83 000785 Crosshead, for front chain adjuster eye-bolt, Pre-56 all models, 1958-on CS singles only 5.15 4.29 (x2) 022504 Crosshead, for front chain adjuster bolt, 1956-57 all models, 1958-on road models only 6.50 5.42 041124 Nut, gearbox adjusting bolt, 1961-on CS singles 0.30 0.25 * Burman CP Gearbox 179-X-7 CP 16 teeth gearbox sprocket 25.50 21.25 CP 17 teeth gearbox sprocket 27.25 22.71 179-X-2 CP 18 teeth gearbox sprocket 27.65 23.04 CP 19 teeth gearbox sprocket 28.30 23.58 176-X Nut fixing gearbox sprocket to main driving gear 8.15 6.79 210-X-1 Washer, lock, gearbox sprocket nut 5.00 4.17 180-X-8 Spacing collar, gearbox sprocket 4.50 3.75 010957 Bolt, gearbox top fixing, with nut & washer, all models except 350cc pre-engine no. 8.90 7.42 39-G9-G59 8000 011086 Spacer, gearbox top & bottom mountings, inside engine plates left & right, all models 2.60 2.17 39-G9-G61 with CP gearbox except 350cc before engine no. 8000 012999 Spacer, gearbox top fixing bolt, outside right, 1948-on. Use for STD632 2.30 1.92 (STD632) 000312 Stud, gearbox bottom fixing, 350cc before engine no. 8000, with nuts 3.00 2.50 000312/NOS Stud, gearbox bottom fixing, 350cc before engine no. 8000, 'New Old Stock' 2.50 2.08 000313 Stud, gearbox bottom fixing, 1945-50 all models (except 350cc before engine no. 3.00 2.50 8000); 1951 twins only. Also gearbox top fixing, 350cc before engine no. 8000, with nuts 000318 Stud, gearbox bottom fixing, 1951 all singles, with nuts 3.50 2.92 63-X-1 Nut, for ¼" gearbox and kick-starter case studs 0.15 0.13 152-X-1 Nut, for 5/16" gearbox and kick-starter case studs 0.20 0.17 326-X CP gearbox filler cap 6.00 5.00 356-X-1 Washer, fibre, for gearbox shell drain plug 0.20 0.17 2-1-C/PW Gasket for Burman CP kickstarter case, Pre-War models with external (exposed) 1.20 1.00 clutch operating mechanism 4-1-C/PW Gasket for Burman CP kickstarter case cover, Pre-War models with external (exposed) 1.20 1.00 clutch operating mechanism 2-1C Gasket for Burman CP kickstarter case 1.10 0.92 4-1C-2 Gasket for Burman CP kickstarter case cover 1.40 1.17 177-X CP ball bearing, for driving gear on mainshaft 32.50 27.08 112-C Felt washer for driving gear ball bearing, pre-1948 grease-type CP gearbox 1.50 1.25 (112-C-2) Oil seal, main driving gear bearing, for oil-filled gearboxes - no longer available, use B52 - - 27-12-2 seal with 39-12-1 housing 68-X CP ball bearing, for mainshaft 5.00 4.17 192-X Rollers for camshaft (set of 12) 2.00 1.67 CO-66-1 Main spring, for spring box (large spring) 1.50 1.25 CO-67-1 Pawl spring, for spring box (small spring) 1.25 1.04 CO-97-1 Gear position indicator, fixed 2.75 2.29 CO-97-2 Gear position indicator, moving 3.00 2.50 171-X Nut, retaining moving gear indicator, pre-1948 0.20 0.17 330-X-1 Plunger, clutch operating 13.90 11.58 67-X-1 Ball, steel, for clutch thrust rod 0.10 0.08 28-X-4 28-X-56 Rod, thrust, for clutch, 9 7/8" long (four plate clutch) 7.45 6.21
28-X-5 Rod, thrust, for clutch, 10 3/16" long (five plate clutch) 7.45 6.21 28-X-57 34-X-2 Roller race for clutch bearing chainwheel 11.60 9.67 35-X Rollers for chainwheel bearing, (set of 24) 8.00 6.67 36-X-2 Washer for chainwheel bearing, thin 7.00 5.83 36-X-3 Washer for chainwheel bearing, thick 7.50 6.25 2-X-16 Centre for five plate clutch, 4-stud type 45.00 37.50 (69-X) Nut retaining clutch centre - use B52 11-7-11 nut 3.00 2.50 71-X Washer, plain, for clutch centre retaining nut 0.90 0.75 349-X-3 Washer, lock, for clutch centre retaining nut. Replaces 212-X spring washer 2.00 1.67 3-X-2 CP clutch plate, friction, bonded, 1941-50 (1951 as B52) 18.00 15.00 5-X CP clutch plate, plain steel, thin (0.040"), 1941-49 all models & 1950 350cc only (1951 6.30 5.25 as B52) 6-X-5 CP clutch plate, plain steel thick (0.060"), 1950 500cc only (1951 as B52) 7.50 6.25 21-X-3 Clutch spring 2.00 1.67 22-X-2 Cup for clutch spring 7.40 6.17 23-X-3 Adjusting nut for clutch spring 2.50 2.08 24-X-11 Stud for clutch spring, 4-plate clutch 2.75 2.29 24-X-12 Stud for clutch spring, 5-plate clutch 2.75 2.29 CO-63-3 Bolt clamping gear lever with nut & spring washer 1.50 1.25 10-X-1 OS-52-1 CO-82-2 Burman gear lever rubber 1.20 1.00 183-X Pinion, ratchet, kickstarter 31.25 26.04 185-X Spring, kickstarter ratchet pinion 1.00 0.83 198-X-4 Spindle for kickstarter quadrant (pre-1949) 48.00 40.00 Burman kickstart rubber, enclosed end 1.50 1.25 194-X-26 115-X-1 CP non-folding kickstart lever, with rubber 32.00 26.67 315-X-1 Bolt fixing kickstarter 4.85 4.04 144-X-1 109-X-1 144-X-1 Nut for kickstarter fixing bolt 0.25 0.21 335-X Nut, domed, folding kickstart pedal 3.25 2.71 214-X Washer, dished spring, folding kickstart pedal nut 1.30 1.08 320-X Stop, rubber & metal sleeve, for kickstarter quadrant 3.50 2.92 * Burman B52 Gearbox 010957 Bolt, gearbox top fixing, with nut & washer, 1952-55 8.90 7.42 012999 Spacer, gearbox top fixing bolt, outside right, 1952-55 2.30 1.92 022509 Bolt, gearbox top fixing, with nut & washers, 1956 8.40 7.00 000318 Stud, gearbox bottom fixing, with nuts 3.50 2.92 21-10-1 Filler cap for B52 gearbox 6.50 5.42 12-7-6 Washer, fibre, for gearbox shell drain plug 0.20 0.17 12-5-4 Washer, fibre, for oil level plug 0.20 0.17 12-2-5 Washer, fibre, for under head of outer cover screws 0.15 0.13 21-5-1 Oil level plug for outer cover 3.10 2.58 14-2-3/4/5/6/7 Screws for B52 outer cover (set) 10.00 8.33 G-5-3 Gasket for Burman B52 inner gearbox cover 1.10 0.92 G-5-4 Gasket for Burman B52 outer gearbox cover 1.40 1.17 38-11-1 B52 ball bearing, for driving gear on mainshaft 32.50 27.08 38-7-1 B52 ball bearing, for mainshaft 5.00 4.17 27-12-2 B52 oil seal for driving gear bearing 2.00 1.67 39-12-1 Housing, for driving gear bearing oil seal 10.00 8.33 19-8-13 Bush, for mainshaft driving gear 8.50 7.08 19-8-15 Bush, for mainshaft third and layshaft second gears 13.30 11.08 27-7-5 B52 oil seal in cover bush for kickstarter spindle 1.50 1.25 27-4-2 Oil seal in cover bush for cam spindle 1.75 1.46 27-7-4 B52 oil seal in cover bush for control quadrant spindle 1.50 1.25 G-31-1 B52 16 teeth gearbox sprocket 25.50 21.25 B52 17 teeth gearbox sprocket 27.25 22.71
B52 18 teeth gearbox sprocket 27.65 23.04 B52 19 teeth gearbox sprocket 28.30 23.58 11-11-1 Nut fixing gearbox sprocket to main driving gear 8.15 6.79 12-11-1 Washer, lock, gearbox sprocket nut 5.00 4.17 28-12-16 Spacing collar, gearbox sprocket 4.50 3.75 018494 Water deflector, fits under 11-11-1 gearbox sprocket nut. Covers large hole in chaincase, 13.50 11.25 preventing ingress of water and mud. Originally fitted to 1952-56 competition models with B52 gearbox but also suitable for road models with B52 16-1-4 Pin, cotter, for selector spindle pegs 0.10 0.08 G-42-3 Plunger locating cam assembly 12.00 10.00 36-2-1 Spring, for cam assembly locating plunger 3.00 2.50 36-8-3 Spring, secondary, for control quadrant 3.50 2.92 G-47-1 Gear indicator, correct round type 5.00 4.17 36-4-1 Spring under gear indicator 1.00 0.83 11-2-3 Nut retaining gear indicator 0.75 0.63 10-2-2 Bolt clamping gear lever with nut & spring washer 1.50 1.25 11/12-2-1 G-48-1 Burman gear lever rubber 1.20 1.00 12-10-2 Roller race for clutch bearing chainwheel 11.60 9.67 18-2-1 Rollers for chainwheel bearing, (set of 24) 8.00 6.67 12-10-3 Washer for chainwheel bearing, thin 7.00 5.83 12-10-4 Washer for chainwheel bearing, thick 7.50 6.25 12-7-7 Washer, plain, for clutch centre retaining nut 0.90 0.75 12-7-5 Washer, lock, for clutch centre retaining nut 2.00 1.67 11-7-11 Nut retaining clutch centre 3.00 2.50 G-32-2 G-33-3 Cam-plates, fixed & moving, actuating clutch, pair 34.00 28.33 37-3-4 Rod, thrust, for clutch, 9 7/8" long (four plate clutch) 7.00 5.83 37-3-1 Rod, thrust, 10 3/16" long (five plate clutch) 7.00 5.83 17-3-2 Ball, steel, 5/16", for cam-plates & clutch thrust rod 0.10 0.08 35-3-4 Thrust dowel with washer & split pin, passes through both cam-plates 12.50 10.42 36-2-3 Spring for cam plate dowel 2.75 2.29 G-40-12 B52 clutch plate, friction, bonded 14.30 11.92 G-40-6 G-39-1 B52 clutch plate, plain steel, thin (0.040"), 1952-53 350cc only 6.30 5.25 G-39-4 B52 clutch plate, plain steel, thick (0.060"), 1952-53 500cc only & 1954-56 all models 7.50 6.25 25-7-3 Thrust cup/adjuster for pressure plate 4.75 3.96 11-7-8 Nut, lock, for pressure plate thrust cup/adjuster 4.40 3.67 36-6-1 Clutch spring 2.00 1.67 G-42-2 Cup for clutch spring 7.40 6.17 11-2-2 Adjusting nut for clutch spring 2.50 2.08 14-2-1 Stud for clutch spring, 4-plate clutch 2.75 2.29 14-2-8 Stud for clutch spring, 5-plate clutch 2.75 2.29 36-8-2 Spring, kickstarter ratchet pinion 1.00 0.83 G-20-1 Pinion, ratchet, kickstarter 31.25 26.04 11-7-10 Nut retaining ratchet driver to mainshaft 3.57 2.98 G-23-1 Spindle for kickstarter quadrant 33.80 28.17 G-45-3 Burman kickstart rubber, enclosed end 1.50 1.25 G-43-2 G-45-1 B52 non-folding kickstart lever, with rubber 32.00 26.67 10/11/12-4-1 Bolt fixing kickstarter 4.85 4.04 11-4-5 Nut, domed, folding kickstart pedal 3.25 2.71 12-6-4 Washer, dished spring, folding kickstart pedal nut 1.30 1.08 * AMC Gearbox 022509 Bolt, gearbox top fixing, with nut & washers 8.40 7.00 024228 Bolt, gearbox top fixing, 1958-on CS singles 5.50 4.58 000177 Washer, gearbox top fixing bolt 0.30 0.25 012999 Spacer, gearbox top fixing bolt, left & right, 1958-on CS singles 2.30 1.92 000318 Stud, gearbox bottom fixing, with nuts 3.50 2.92 024276 Stud, gearbox bottom fixing, 750cc models except P11, with nuts & washers 3.00 2.50
040030 Gasket for inner kick-start case 1.00 0.83 040055 Gasket for outer kick-start cover 1.15 0.96 040053 AMC gearbox inspection cover, plain 18.50 15.42 000450 Screw for inspection cover 0.10 0.08 040057 Gasket for gearbox inspection cover 1.30 1.08 040138 Drain plug, in shell 5.00 4.17 000577 Dowel locating kick-start case and kick-start cover (2 for inner, 2 for outer) 3.25 2.71 040064 Stud, in shell, for kick-start case 0.85 0.71 000271 Stud in shell, for kick-start case 0.75 0.63 000482 Screw, securing kick-start cover 0.50 0.42 000482A Screw, securing kick-start cover (NB turned to match original cheesehead dimensions exactly) 1.20 1.00 040115 Gear, first, layshaft, 28 teeth, with bush 94.00 78.33 040062 Bush for main driving gear (2 fitted) 4.50 3.75 040048 Bush for mainshaft second gear 9.45 7.88 040047 Bush for layshaft third gear 11.25 9.38 040046 Bush for layshaft first gear 9.00 7.50 040098 Ball bearing for main driving gear 31.75 26.46 040099 Ball bearing for mainshaft in kickstart case 23.00 19.17 040100 Ball bearing for layshaft in shell 5.00 4.17 040056 Bush, in shell, for camplate spindle and quadrant spindle 8.90 7.42 040132 Oil seal for main gear bearing 2.00 1.67 040129 Oil seal, O-ring for camplate spindle and quadrant assembly 0.20 0.17 040129Q Oil seal, for camplate spindle and quadrant assembly, improved design 0.50 0.42 040061 Bush, in kick-start case (inner), for footchange spindle 9.75 8.13 040058 Bush, in kick-start case cover, for kick-start spindle (outer), 1957-61 type for M- not MA- 8.00 6.67 040472 Bush, in kick-start case cover, for kick-start spindle (outer), 1962-on type for MA- not M- 12.50 10.42 040072 Bush, in kick-start case (inner), for kick-start spindle, 1957-61 type for M- not MA- 16.95 14.13 040473 Bush, in kick-start case (inner), for kick-start spindle, 1962-on type for MA- not M- 16.95 14.13 040063 Bush, in kick-start case cover (inner), for footchange spindle 5.60 4.67 040079 Oil seal, O-ring for ratchet spindle 0.20 0.17 040006 Oil seal, O-ring for footchange spindle 0.20 0.17 040006Q Oil seal, for footchange spindle, improved design (no need for modification to the 0.50 0.42 cover) 040005 Oil seal, O-ring for kickstarter 0.20 0.17 040005Q Oil seal, for kickstarter, improved design (no need for modification to the cover) 0.50 0.42 AMC 14 teeth gearbox sprocket. NB does not have threaded holes for 040076 plate, 21.00 17.50 not enough space in outer face. AMC 15 teeth gearbox sprocket 21.00 17.50 040407 AMC 16 teeth gearbox sprocket 21.00 17.50 040451 AMC 17 teeth gearbox sprocket 21.00 17.50 AMC 18 teeth gearbox sprocket 21.00 17.50 040480 AMC 19 teeth gearbox sprocket 21.00 17.50 040070 Nut fixing gearbox sprocket 6.00 5.00 040076 Plate locking gearbox sprocket nut 2.00 1.67 040131 Spacer for gearbox sprocket 12.00 10.00 000174 Washer, plain, for camplate or spindle 0.60 0.50 040136 Screw for camplate or spindle 3.30 2.75 040035 Shaft, for selector fork 14.00 11.67 040111 Gear, ratchet assembly. Comes with 040066 spindle 65.00 54.17 040078 Roller for knuckle pin 7.00 5.83 040038 Pawl spring for gear change 2.50 2.08 040103 Circlip, knuckle pin 0.30 0.25 040110 Carrier, pawl assembly. Includes 040002 carrier & 040067 pin 78.00 65.00 040067 Pin, for pawl carrier 8.00 6.67 040024 Pawl, footchange 20.30 16.92 040049 Circlip, footchange pawl 0.30 0.25
040066 Spindle for ratchet 15.32 12.77 040479 AMC gear change return spring, 1962-on. Improved version of 040075 3.50 2.92 (040075) 040135 Washer, gear change return spring 1.33 1.11 040052 Plate, stop, gear change 6.75 5.63 041400 Screw, gear change stop plate 3.25 2.71 041311B AMC gear lever pedal, British-made (supplied without bolt or rubber). Use for 29.50 24.58 040004 040086 AMC gear lever rubber 1.00 0.83 040105 Bolt clamping gear lever with nut & spring washer 1.50 1.25 040051 Gear indicator 3.75 3.13 040137 Bolt for gear indicator. Also use for 000348 oil level plug. 0.90 0.75 040034 Plunger for camplate 10.00 8.33 040442 Spring for camplate plunger. Also use for 040045. 1.80 1.50 (040045) 040036 Housing/bush for camplate plunger 10.50 8.75 040434 AMC folding kickstart lever, with bolt & rubber, superior quality British-made 117.50 97.92 040432 Nut, domed, fixing folding kickstart pedal to crank 3.25 2.71 040433 Washer, dished spring/belleville, kickstart pedal nut 1.30 1.08 040102 Bolt fixing kickstarter 4.50 3.75 033218 AMC kickstart rubber, open end 1.50 1.25 040114 040477 Kickstart axle, with 040146 bush. Suits both early & late return springs 98.50 82.08 040146 Bush for kickstart axle. Also suitable for 040032 10.60 8.83 040017 Pawl for kickstart axle 10.40 8.67 040033 Pin, kickstart axle pawl 2.00 1.67 040044 Spring, kickstart axle pawl 1.25 1.04 040069 Plunger, kickstart axle pawl 1.00 0.83 040041 Rivet, for kickstart cam or stop 2.20 1.83 040042 Stop, for kickstart axle 6.50 5.42 040071 Cam, for kickstart axle 1.30 1.08 040043 AMC kickstart return spring, 1957-61 type for M- not MA- 6.25 5.21 040475 AMC kickstart return spring, 1962-on type for MA- not M- 5.70 4.75 040023 Nut for mainshaft, kickstart end 3.30 2.75 040392 Clutch sprocket, pre-1960 type with bonded friction material, suitable for 040353 plain steel back plate only 105.00 87.50 040359 Clutch sprocket, solid type, suitable for 1959-on 040584 friction back plate only 86.50 72.08 040584 Clutch back plate, bonded type, suitable for 1959-on 040359 sprocket only 80.00 66.67 040351 Race plate for clutch 35.00 29.17 000075 Rollers for clutch (set of 15) 5.00 4.17 040367 Cage for rollers 20.00 16.67 040386/7 AMC clutch shock absorber rubbers, set: 3 large, 3 small 5.00 4.17 040386/7 AMC clutch shock absorber rubbers, set: 3 large, 3 small. British-made, more supple & 12.50 10.42 much better fit than cheaper version. 040363 Screw, shock absorber cover plate 0.75 0.63 040373 Nut retaining clutch 3.25 2.71 040374 Lock washer for clutch retaining nut 0.25 0.21 040391 AMC clutch plate, friction, bonded, double side, external lugs (pre-1960) 16.75 13.96 043192 AMC clutch plate, friction, bonded, double side, internal lugs (1959-on) 11.75 9.79 043193 AMC clutch plate, friction, bonded, single side, internal lugs (1959-on) 15.00 12.50 040355 AMC clutch plate, plain, internal lugs (pre-1960) 7.60 6.33 043191 AMC clutch plate, plain, external lugs (1959-on) 7.60 6.33 043443 (040354) Centre, shock absorber. Improved version of 040354, suitable for all Heavyweight models 61.75 51.46 040366 AMC clutch centre 57.00 47.50 040365 Pressure plate, bare 27.00 22.50 040365B Pressure plate, billet, bare 34.50 28.75 040360 Adjuster for clutch in pressure plate 5.75 4.79 040376 Nut for clutch adjuster 2.25 1.88 040389 AMC nut for clutch spring adjustment 2.50 2.08 040384 (043441) AMC clutch spring stud 5.00 4.17
040385 AMC clutch spring 2.50 2.08 040358 AMC clutch spring for 5-plate clutch 2.50 2.08 040388 Cup, clutch spring 8.50 7.08 040356 Nut fixing clutch stud to clutch centre 1.75 1.46 040084 Rod, clutch operating 7.75 6.46 040029 Clutch operating lever 17.75 14.79 040059 Body, clutch operating 22.40 18.67 040003 Lock ring for clutch body 7.00 5.83 23441 Tool removing clutch lock ring 17.50 14.58 040031 Ball, clutch operating 0.75 0.63 040060 Roller, clutch operating 5.00 4.17 040065 Sleeve, clutch operating roller 3.90 3.25 000457 Screw, clutch operating roller 2.30 1.92 Tool locking clutch. Has handle and internal & external lugs for engaging with centre & basket. Fits all AMC clutches (similar to Fig.51 in Workshop Manual). 20.50 17.08 040449 AMC clutch extractor tool 10.50 8.75 * Lightweight Gearbox For other LW gearbox parts, check HW AMC Gearbox section 012545 Ball bearing for mainshaft in inner case 14.30 11.92 041266 Bearing, roller, in shell for main driving gear 70.00 58.33 040006Q Oil seal for footchange & kickstart spindles 0.50 0.42 042158 Gasket for inner gearbox case 0.60 0.50 042159 Gasket for outer gearbox cover 0.60 0.50 042154 Gasket for gearbox inspection cover 0.60 0.50 000451 Screw for inspection cover 0.10 0.08 041085 Screws for gearbox outer cover, set of 6 11.00 9.17 041265 Nut, mainshaft bearing; nut retaining clutch centre 1.50 1.25 041398 Washer, lock, clutch retaining nut 0.20 0.17 041307 Bush for footchange ratchet shaft, in shell 3.50 2.92 042145 Bush for footchange, in outer cover 3.50 2.92 041327 Spring, footchange pawl 3.50 2.92 041311B Lightweight gear lever pedal (supplied without bolt or rubber), British-made 29.50 24.58 040086 AMC gear lever rubber 1.00 0.83 040043 Kickstart return spring 6.25 5.21 033218 AMC kickstart rubber, open end 1.50 1.25 041272 Washer, lock, gearbox sprocket nut 3.83 3.19 043192 AMC clutch plate, friction, bonded, double side, internal lugs 11.75 9.79 043193 AMC clutch plate, friction, bonded, single side, internal lugs 15.00 12.50 043191 AMC clutch plate, plain, external lugs 7.60 6.33 043342 Lightweight clutch plate, shouldered with external lugs, 350cc Lightweight models 15.00 12.50