GR10 ar Grating Grip Strut Grating Safe-T-Grid Grating ar Grating Sunshade Perf-O Grip Stair Treads Fiberglass Grating Molded lose Mesh ar Grating Ramp Fiberglass Grating Pultruded www.mcnichols.com 1-800-37-380 e-mail: sales@mcnichols.com Member Metals Service enter Institute
ob McNichols FONER McNIHOLS OMPANY was founded in 195 by the late Robert L. McNichols, whose hristian values established the organization s high ethical standards and strong commitment to customer satisfaction in every phase of the business relationship Service, Quality and Performance. Today, under the leadership of President Scott McNichols, we are building on a commitment of quality through our continual expansion of our service centers, adding diversity to product lines, and technology upgrades for our communications and processing systems. This combined with assistance McNichols family members: Scott, Jennifer, Gene, and Steve. ar Grating was used vertically as an attractive, high strength security fence for this resort. from a highly trained ustomer Service Specialist and Same ay Stock Shipment will meet your needs in the fastest, most efficient manner possible. We are proud that our nationwide service centers are ISO ertified. Our Quality Programs help insure that you receive quality products and the highest level of service. iverse Product Selection! omplete inventories are maintained at our service centers, so you will have what you need when you need it! Our grating product line carries the most popular styles in various sizes and metals including fiberglass. Stair treads and accessories are also available to complete your system requirements. We can also handle special requests! Serving You is our Number One Goal! Whether your requirements are large or small, our highly trained employees are committed to meeting your needs accurately and efficiently. Our 010 esigner atalog includes designer metals, textured metals, and special metal finishes. all for yours today! Local Service enter Phone Fax Location ATLANTA 770-499-1441 770-499-9559 1980 Shiloh Road NW ldg 6 #300, Kennesaw, GA 30144-647 ALTIMORE 301-36-000 301-36-0448 9070 Junction rive #M, Annapolis Junction, M 0701-1141 OSTON 978-663-5500 978-663-5508 33 High Street, North illerica, MA 0186-415 HARLOTTE 704-91-5 704-91-8 307 istribution enter rive #F, harlotte, N 869-43 HIAGO 847-635-5100 847-635-1115 51 Wille Road #, es Plaines, IL 60018-1861 ININNATI 513-731-8811 513-731-881 3470 E. Kemper Road, incinnati, OH 4541-007 LEVELAN 16-587-4000 16-587-4004 4889 NEO Parkway, leveland, OH 4418-3195 ALLAS 14-349-3150 14-553-859 3540 W. Miller Road #40, Garland, TX 75041-6014 HOSTON 81-443-8400 81-09-1999 16405 Air enter oulevard #100, Houston, TX 7703-5133 KANSAS ITY 913-310-0599 913-310-0119 15341 W. 100th Terrace, Lenexa, KS 6619-194 LOS ANGELES 56-91-3344 56-91-1015 14108 Arbor Place, erritos, A 90703-404 MINNEAPOLIS 651-633-88 651-633-8818 Fifth Avenue NW, New righton, MN 5511-337 NJ/NY Area 73-846-8333 73-846-5555 Home News Row, New runswick, NJ 08901-360 PHOENIX 60-35-9733 60-35-9734 555 W. Latham Street #7, Phoenix, AZ 85043-1601 SAN FRANISO 510-887-7778 510-887-7779 196 abot oulevard, Hayward, A 94545-1143 SEATTLE 53-939-4747 53-939-7809 11-A 9th Street NW, Auburn, WA 98001-431 TAMPA 813-43-1800 813-43-1888 9401 orporate Lake rive, Tampa, FL 33634-359 New! AMINISTRATION 813-8-388 813-87-1066 PO ox 30300, Tampa, FL 33630-3300 HEAQARTERS 50 N. Rocky Point rive Suite 950, Tampa, FL 33607-1447 Field Sales Office Phone Fax Field Sales Office Phone Fax FFALO 716-688-5005 716-688-553 MILWAKEE 414-570-1881 414-570-188 HARTFOR 860-953-3535 860-953-3636 E-mail: sales@mcnichols.com 000-010 McNIHOLS O. The Hole Story and McNIHOLS are registered trademarks of McNIHOLS O. All rights reserved. No part of this book may be reproduced in any form without permission. Printed in the.s.a. Please note that application photos reflected are typical of our type of products in use that can be supplied or have been supplied by McNIHOLS O. Some photos may depict uses designed, manufactured, fabricated or installed by others. New! NEW! SPANISH HOTLINE 1-800-37-91 1-813-87-4064 Fax ventas@mcnichols.com McNIHOLS ANAA 3-1750 The Queensway, Suite 444 Toronto, ON, M9 5H5 anada 1-800-37-380 905-51-4445 905-51-4447 Fax canada.sales@mcnichols.com W O R L W I E S E R V I E nited States aribbean 1-800-37-380 Mexico 001-800-37-380 International 1-813-43-1800 International Fax 1-813-87-4064 international.sales@mcnichols.com harge your order today!
VALE AE SERVIES When it comes to Fabrication Services - we are ready to assist with Hole Product selections and fabricate them to spec for your job requirements! Print Takeoffs/A Our A experts are trained to do takeoffs from your drawings or spec blueprints to provide you approval drawings, erection and/or field drawings as required. Please send your drawings or specifications by e-mail or overnight them for a quick quote. rawings Approval Erection Field Welding Our certified welders fabricate steel, aluminum, stainless and more. We also fabricate areas of gratings per your specifications with custom cutouts, banding and/or toe plates. Send your drawings or specifications by e-mail, fax, or overnight them for a fast quote! ut-to-size Whether you require cut-to-length panels, sheets, planks and/or rolls McNIHOLS can help. Our capabilities also include cut pieces and special shapes such as circles, cutouts and notches. Our nationwide service centers are equipped with a variety of specialized cutting equipment. Infill Panels McNIHOLS can fabricate infill panels to your specifications from variety of products with many patterns, openings and gauges. Where strength is a key factor, bar grating is often used vertically. Stair Treads See Page 10 We can fabricate more than 17 different styles of stair treads in a variety of sizes and material types. We are happy to assist you with the many style choices and options. Many sizes of GW welded series are in stock for immediate shipment. Galvanized Treads in Stock for Quick Shipment! Notches anding ircles Toe Plates Metal Finishes/Powder oating Since iron and steel can corrode in the environment, the most popular finish for them is galvanizing. We stock a variety of steel products in pre-galvanized and hot dip galvanized. We also offer a selection of stock welded bar grating with the durable GRATE-OAT powder coated finish please inquire. For quick shipment on GW & GW 15 treads order now! Galvanized Treads Powder oated Finishes We have a variety of infill panel and partition solutions. 010 We are proud to be a member of NAAMM. 1-800-37-380
ar grating on page 3! Fasteners Minimum quantity may apply. Hardware included with fastener. Please inquire for all others. AA Grating.........................., 5, 7-9, 1-13, 19-0 Aluminum Grating/Plank....................... 3, 5-9, 11-13, 15 ar Grating, Rectangular ar Welded....................... -4 lose Mesh Rectangular ar Grating......................... 8 IAMONAK Plank.................................. 13 Expanded Grating/atwalk................................. 9 Fasteners............................................... Fiberglass Grating..................................... 19-1 Flooring........................................ 9, 1-13, 19 GRATE-LOK Grating................................... 14 Gridsteel Grating....................................... 13 GRIP STRT Grating................................. 15-18 GRIP TIGHT Products (formerly known as Mebac )................... 13 Ladder Rungs..................................... 1-13, 18 Locked by Swaging Grating............................... 5-6 Mat/Pit Grating........................................... 9 Matting............................................... 13 Perf-O Grip Grating..................................... 11 Plank Grating................................... 7, 11-15, 18 Press-Locked Grating................................... 3, 8 Riveted Grating.......................................... 5 Stair Treads............................... 7, 10-1, 15-16, 18 Traction Tread Grating................................... 1 Trench Grating........................................... Gratings that meet the spacing requirements of the American isabilities Act (AA) are noted with this symbol. HOW TO ORER/SPEIFY Simply call 1-800-37-380, and we will be ready to help you with your needs. We can process your inquiry or order more quickly, if you have the following information available when you call. ONSIER: Fiberglass Grating - p.19 1. Application or use of product Grip Strut Grating - p.15. Physical requirements A. Loading. Environment. Percent of open area 3. Specify McNIHOLS Quality Grating or Flooring 4. Type: please specify type of grating. State item number if available. 5. Material: plain steel, aluminum, stainless steel, fiberglass, etc. 6. Finish: black powder coated, painted black, galvanized, special, if any 7. Quantity: number of panels, areas, planks, walkways, treads or rungs full size or cut pieces required 8. Height: bar, plank or panel height as applicable 9. Width: width of plank or pieces specify tolerances, if any 10. Length: length of plank or pieces specify tolerances, if any 11. Surface: plain, serrated, grit, grooved, if any 1. For Rectangular ar, I-ar or T-ar panels: indicate spacing between bearing bar centers and cross bar centers. 13. Indicate span: direction of bearing bars 14. Special Fabrication: banding requirements, lugs, bolt holes, etc., if any 15. Fasteners: type, size, hardware TO PLAE AN ORER ALL: 1-800-37-380 FAX: See inside front cover for nearest service center. TYPE FSSGF TYPE Z/J TYPE F TYPE MT TYPE GM TYPE Easy Install TYPE GG TYPE SSG TYPE M TYPE RT/RI TYPE GN TYPE G TYPE GFS Type FSSGF Stainless Steel grating fastener has a specially formed G-lip bottom which has a flat, bearing pad area facing up to Fiberglass structural members, protecting surfaces from puncture. Type Z/J Stainless 316 or 304 (1", 1-1/" or ") For Molded Fiberglass Grating to secure planks to support frames. No hardware. To order fastener and hardware specify Type J. (Type Z has no hardware.) Type F Stainless 316 (1", 1-1/" or ") For Molded Fiberglass end planks to join side bars that are butted end to end. Type MT Stainless Steel 316 (1", 1-1/", or ") For Pultruded Fiberglass T-ar Grating to secure planks to support frame using two adjacent bars for support. Specify bar spacing and height. NEW! Type GM Galvanized arbon Steel. sed to mount other devices to grating surface. 1/" x 3" stud with patented base that includes 1/" nut and plate which sits above the grating and is tightened down. Available in Stainless 316. Type Galvanized Steel, Aluminum, or Stainless Steel (specify). Saddle lip is a positive fastener for welded, press-locked and locked by swaging gratings with bearing bars spacing of 15/16" (A) or 1-3/16" (). -shaped fastener is placed over two main bearing bars and screwed to grating support. (Screw, nut, washer, etc. NOT included.) Type GG Galvanized, Stainless Steel or Aluminum (available for 1" to 5" bar height; 1/4" to 6" flange or structural member thickness specify requirement). Hold own Fastener to attach grating to structural shape in a horizontal plane. Standard GG fasteners are for grating with 7/8" to 1" gap between bearing bars (inquire for closer spacing). Type SSG Stainless Steel 316 grating fastener used to fasten close-mesh bar grating to structural shapes, where the structural flange is in a horizontal plane. Has unique narrow width to accommodate very narrow (3/8") grating slots. (Special order.) Type M Stainless 316 (1", 1-1/" or ") For Molded Fiberglass Grating to secure planks to support frame using two adjacent bars for support. Type RT/RI Stainless Steel 316 (any height) hold down fastener for Pultruded Fiberglass T-ar or I-ar grating that slides between two bars and holds the bottom flange down to support frame. Fastener is below walking surface. Specify bar spacing and type. NEW! Type GN Narrow Galvanized arbon Steel for fastening 15/16" spacing bar grating to structural shapes where structural flange is in a horizontal plane. (Special order.) Type G Galvanized or Stainless Steel. Hold own Fastener for smaller openings between two adjacent bars or plate to existing structure/frame. (ap screw not included.) Type GFS ast malleable iron body galvanized. esigned to fit bearing bar thicknesses 1/4", 3/16", and 1/8" at 1-3/16" centers. Stepped tail allows fastener to fit various bearing bar heights to -1/4" and beam flanges from 1/8"-3/4". (Screw included.) Type GFSS-1 (Not shown) has cast malleable iron body galvanized. racket of 14 gauge 304 Stainless Steel with one offset wing to fit spacing between bars 5/8" to 1-3/8". 30 Stainless Steel screw to accommodate up to 1-3/4" of grating depth. Serrated Grating.50" center to center Embed Angles add to the Grating life of your trench grating! Individual L-type angle/frame configurations that form - or 4-sided individual frames or 4-sided welded pour frames. Frames are to be embedded in concrete to form edges for grating applications. Grating surface is slip-resistant. Available for rectangular bearing bars from 1" x 1/8" to -1/" x 3/16". epth of grating required for a specified load will be 1/4" greater than that shown in load tables. Several other types of serrated grating available. Trench Grating with Embed Angle & Frames Embed Angle ar grating on page 3! Safe, secure bar grating is used as a pedestrian walkway over these railroad tracks Happy to have served you since 195! 1-800-37-380 010
GW Welded Series ONSTRTION: Welded bearing and 1/4" square twisted cross bars MATERIAL: Plain Steel Powder oated lack H Galvanized Steel Stainless Steel Type 304 (mill finish) sandblast optional HEIGHTS: 3/4" to -1/" WITHS: See panel width chart LENGTHS: 0' STOK or cut-to-size AR THIKNESS: 1/8" or 3/16" SERIES GW (19W4) GW- (19W) SGW (15W4) SGW-(15W) ar Spacing Welded Grating Stocked as GRATE OAT Powder oated earing ar Size Item No. #/SF Item No. #/SF Item No. #/SF Item No. #/SF 3/4" x 1/8" GW-75A 4.1 GW-75A- 5.0 SGW-75A 5.0 SGW-75A- 5.9 3/4" x 3/16" GW-75 5.8 GW-75-6.7 SGW-75 7. SGW-75-8.1 1" x 1/8" GW-100A 5. GW-100A- 6.1 SGW-100A 6.4 SGW-100A- 7.3 1" x 3/16" GW-100 7.5 GW-100-8.4 SGW-100 9.3 SGW-100-10. 1-1/4" x 1/8" GW-15A 6.3 GW-15A- 7. SGW-15A 7.9 SGW-15A- 8.8 1-1/4" x 3/16" GW-15 9.1 GW-15-10.0 SGW-15 11.3 SGW-15-1. 1-1/" x 1/8" GW-150A 7.4 GW-150A- 8.3 SGW-150A 9.3 SGW-150A- 10. 1-1/" x 3/16" GW-150 10.8 GW-150-11.7 SGW-150 13.5 SGW-150-14.4 1-3/4" x 3/16" GW-175 1.5 GW-175-13.4 SGW-175 15.6 SGW-175-16.5 " x 3/16" GW-00 14.1 GW-00-15.0 SGW-00 17.7 SGW-00-18.6-1/4" x 3/16" GW-5 15.8 GW-5-16.7 SGW-5 19.8 SGW-5-0.7-1/" x 3/16" GW-50 17.4 GW-50-18.3 SGW-50 1.9 SGW-50-.8 GW, SGW, GAA, G Series Panel Widths No. GW, GW- SGW, SGW- ars GAA, G G, G 1-3/8" 1-1/8" 3-9/16" -1/16" 4 3-3/4" 3" 5 4-15/16" 3-15/16" 6 6-1/8" 4-7/8" 7 7-5/16" 5-13/16" 8 8-1/" 6-3/4" 9 9-11/16" 7-11/16" 10 10-7/8" 8-5/8" 11 1-1/16" 9-9/16" 1 13-1/4" 10-1/" 13 14-7/16" 11-7/16" 14 15-5/8" 1-3/8" 4" ross ar enters 1-3/16" earing ar enters Measure from the center of one bar to the center of the adjacent bearing bar. McNIHOLS durable welded grating has GRATE OAT Powder oating. No. GW, GW- SGW, SGW- ars GAA, G G, G 15 16-13/16" 13-5/16" 16 18" 14-1/4" 17 19-3/16" 15-3/16" 18 0-3/8" 16-1/8" 19 1-9/16" 17-1/16" 0-3/4" 18" 1 3-15/16" 18-15/16" 5-1/8" 19-7/8" 3 6-5/16" 0-13/16" 4 7-1/" 1-3/4" 5 8-11/16" -11/16" 6 9-7/8" 3-5/8" 7 31-1/16" 4-9/16" No. GW, GW- SGW, SGW- ars GAA, G G, G 8 3-1/4" 5-1/" 9 33-7/16" 6-7/16" 30 34-5/8" 7-3/8" 31 35-13/16" 8-5/16" 3 9-1/4" 33 NOTE: 30-3/16" 34 WITH 31-1/8" AN 35 3-1/16" LENGTH 36 TOLER- 33" 37 ANE 33-15/16" 38 ±1/4" 34-7/8" 39 35-13/16" STOK SIZE Maximum width indicated. Wider areas will be made in two or more panels. GW & SGW panels are available up to 48" wide by special order. All other widths are cut-to size. educt 1/16" from width for 1/8" bearing bars. SERIES GAA (19P4) G (19P) G (15P4) G (15P) ar Spacing WE AN O FAST T TO SIZE! MATERIAL: Plain or H Galvanized, Painted Steel, Aluminum Stainless Steel - Mill Finish ONSTRTION: McNIHOLS Press-Locked Steel Grating cross bars are pressed into the bearing bars flush top under tremendous pressure laterally displacing 1/16" of cross bar material into the dovetail slot, assuring firm, rigid connections. eep cross bars are used for lateral support. The main bars are not cut, punched or otherwise deformed below the neutral axis and therefore can resist up to the yield stress for the full cross-section of the bars. earing ar Size Item No. #/SF Item No. #/SF Item No. #/SF Item No. #/SF 3/4" x 1/8" GAA-75A 4.4 G-75A 4.6 G-75A 4.8 G-75A 5.5 3/4" x 3/16" GAA-75 5.7 G-75 6.4 G-75 7.0 G-75 7.7 1" x 1/8" GAA-100A 5. G-100A 6.0 G-100A 6.4 G-100A 7. 1" x 3/16" GAA-100 7.5 G-100 8.3 G-100 9.3 G-100 10.1 1-1/4" x 1/8" GAA-15A 6.3 G-15A 7.1 G-15A 7.9 G-15A 8.7 1-1/4" x 3/16" GAA-15 9.1 G-15 9.9 G-15 11.3 G-15 1. 1-1/" x 1/8" GAA-150A 7.6 G-150A 8.7 G-150A 9.5 G-150A 10.6 1-1/" x 3/16" GAA-150 11.0 G-150 1.1 G-150 13.7 G-150 14.8 1-3/4" x 3/16" GAA-175 1.7 G-175 13.8 G-175 15.8 G-175 16.9 " x 3/16" GAA-00 14.3 G-00 15.4 G-00 17.9 G-00 19.0-1/4" x 3/16" GAA-5 16.0 G-5 17.1 G-5 0.0 G-5 1.1-1/" x 3/16" GAA-50 17.7 G-50 18.8 G-50.1 G-50 3. GW, GW-, GAA & G Series Steel earing ar Size 3/4" x 1/8" 3/4" x 3/16" 1" x 1/8" 1" x 3/16" 1-1/4" x 1/8" 1-1/4" x 3/16" GAA Press-Locked Series Not recommended for wheel traffic or barefoot pedestrian. Available by special order! Visit www.mcnichols.com for even more grating information LOA TALE SPAN (1-3/16" enter to enter ar Spacings) 1'-0" '-0" '-6" 3'-0" 3'-6" 4'-0" 4'-6" 5'-0" 5'-6" 6'-0" 7'-0" 8'-0" 141 355 7 158 116 89 70 nit Stress 18,000.05.099.155.4.304.398.50 Load Table on lbs per sq. inch 710 355 84 37 03 178 158 www.mcnichols.com.00.079.14.179.43.319.403 - niform Load- 131 533 341 37 174 133 105 Pounds per.05.099.155.4.304.397.50 Sq. Ft. 1066 533 46 355 304 66 37 - eflection.00.079.14.179.43.317.403 in inches 56 63 404 81 06 158 15 101 84 70 - oncentrated.019.075.116.168.8.98.378.465.566.668 Load-Pounds 163 63 505 41 361 316 81 53 30 11 per Ft. width.015.060.093.134.18.38.30.373.451.537 at mid span 3790 947 606 41 309 37 187 15 15 105.019.074.116.168.8.98.377.467.56.669 1895 947 758 63 541 474 41 379 345 316.015.060.093.134.18.38.30.37.451.537 3947 987 631 439 3 47 195 158 130 110 81.015.060.093.134.18.39.30.373.449.538.734 1973 987 789 658 564 493 439 395 359 39 8.01.048.074.107.146.191.4.98.361.49.584 591 1480 947 658 483 370 9 37 196 164 11.015.060.093.134.18.38.301.373.451.535.731 960 1480 1184 987 846 740 658 59 538 493 43.01.048.074.107.146.191.41.98.360.49.584 5684.01 84.010 856.01 463.010 11605.011 5803.009 15158.009 7579.007 19184.008 959.007 3684.007 1184.006 141 910 63 464 355 81 7 188 158 116 89 1-1/" x 1/8".050.078.11.15.198.5.310.376.447.608.796 141 1137 947 81 711 63 568 517 474 406 355.040.06.089.1.159.01.48.301.358.487.635 13 1364 947 696 533 41 341 8 37 174 133 1-1/" x 3/16".050.078.11.15.199.51.310.376.447.608.793 13 1705 141 118 1066 947 853 775 711 609 533.040.06.089.1.159.01.48.300.358.487.636 901 1857 189 947 75 573 464 384 3 37 181.043.067.096.130.170.15.66.3.383.5.680 1-3/4" x 3/16" 901 31 1934 1658 1451 189 1161 1055 967 89 75.034.053.077.104.136.17.13.57.306.417.545 3790 45 1684 137 947 749 606 501 41 309 37.037.058.084.114.149.189.33.8.335.456.596 " x 3/16" 3790 303 56 165 1895 1684 1516 1378 163 1083 947.030.047.067.091.119.151.186.5.68.365.476 4796 3070 13 1566 1199 947 767 634 533 39 300.033.05.074.101.13.168.07.50.98.406.530-1/4" x 3/16" 4796 3837 3197 741 398 13 1918 1744 1599 1370 1199.06.041.060.081.106.134.166.00.38.34.44 591 3790 63 1933 1480 1170 947 783 658 483 370-1/" x 3/16".030.047.067.091.119.151.186.5.68.365.477 591 4737 3947 3383 961 63 368 153 1974 169 1480.04.037.054.073.095.11.149.180.15.9.381 Spans in shaded area produce a deflection of 1/4" or less under a uniform load of 100 pounds per square foot. This deflection is recommended as the maximum to provide pedestrian comfort. It can be exceeded at the discretion of the engineer. To determine load for types shown below, multiply value above by the corresponding load ONVERSION TALEfactor. eflection under the factored loads will be same as shown in load table. Series S GW, S G W-, GM-1 GM- GM-3 GM-4 GM-5 G M G Q G, G G O G R G W H G V Load Factor 1.7.70.35 1.90 1.7 1.45 1.15 1.61.8.58 010 We do takeoffs on blueprints! 1-800-37-380
Heavy Weld Series Our Superior, urable STOK Powder oated Finish! ONSTRTION: Welded MATERIAL: Plain Steel In Stock! lack Powder oated Steel STOK - GH only HEIGHTS: 1" to 7" WITHS: See panel width chart LENGTHS: Please inquire AR THIKNESS: 1/4" (standard) AR SPAINGS: 5/16" or 3/8" (special) 1-3/16" GH Series 1-7/8" HW Series 1-3/8" HW Series -3/8" HWE Series HEAVY WEL PROT ETAILS SERIES GH (19W4) GH- (19W) earing ar Size Item No. #/SF Item No. #/SF 1" GH 100 9.8 GH 100-10.7 1-1/4" GH 15 1.0 GH 15-1.9 1-1/" GH 150 14.3 GH 150-15.1 1-3/4" GH 175 16.5 GH 175-17.4 " GH 00 18.7 GH 00-19.6-1/" GH 50 3. GH 50-4.0 HEAVY WEL PANEL WITHS ear. ars Series GH, GH earing ar Thickness Series HW earing ar Thickness 1/4" 5/16" 3/8" 1/4" 5/16" 3/8" 1-7/16" 1-1/" 1-9/16" 1-5/8" 1-11/16" 1-3/4" 3-5/8" -11/16" -3/4" 3" 3-1/16" 3-1/8" 4 3-13/16" 3-7/8" 3-15/16" 4-3/8" 4-7/16" 4-1/" 5 5" 5-1/16" 5-1/8" 5-3/4" 5-13/16" 5-7/8" 6 6-3/16" 6-1/4" 6-5/16" 7-1/8" 7-3/16" 7-1/4" 7 7-3/8" 7-7/16" 7-1/" 8-1/" 8-9/16" 8-5/8" 8 8-9/16" 8-5/8" 8-11/16" 9-7/8" 9-15/16" 10" 9 9-3/4" 9-13/16" 9-7/8" 11-1/4" 11-5/16" 11-3/8" 10 10-15/16" 11" 11-1/16" 1-5/8" 1-11/16" 1-3/4" 11 1-1/8" 1-3/16" 1-1/4" 14" 14-1/16" 14-1/8" 1 13-5/16" 13-3/8" 13-7/16" 15-3/8" 15-7/16" 15-1/" 13 14-1/" 14-9/16" 14-5/8" 16-3/4" 16-13/16" 16-7/8" 14 15-11/16" 15-3/4" 15-13/16" 18-1/8" 18-3/16" 18-1/4" 15 16-7/8" 16-15/16" 17" 19-1/" 19-9/16" 19-5/8" 16 18-1/16" 18-1/8" 18-3/16" 0-7/8" 0-15/16" 1" 17 19-1/4" 19-5/16" 19-3/8" -1/4" -5/16" -3/8" 18 0-7/16" 0-1/" 0-9/16" 3-5/8" 3-11/16" 3-3/4" 19 1-5/8" 1-11/16" 1-3/4" 5" 5-1/16" 5-1/8" 0-13/16" -7/8" -15/16" 6-3/8" 6-7/16" 6-1/" 1 4" 4-1/16" 4-1/8" 7-3/4" 7-13/16" 7-7/8" 5-3/16" 5-1/4" 5-5/16" 9-1/8" 9-3/16" 9-1/4" 3 6-3/8" 6-7/16" 6-1/" 30-1/" 30-9/16" 30-5/8" 4 7-9/16" 7-5/8" 7-11/16" 31-7/8" 31-15/16" 3" 5 8-3/4" 8-13/16" 8-7/8" 33-1/4" 33-5/16" 33-3/8" 6 9-15/16" 30" 30-1/16" 34-5/8" 34-11/16" 34-3/4" 7 31-1/8" 31-3/16" 31-1/4" 36" 36-1/16" 36-1/8" 8 3-5/16" 3-3/8" 3-7/16" GH and GH- Standard bearing 9 33-1/" 33-9/16" 33-5/8" bar thickness is 1/4". Please specify 30 34-11/16" 34-3/4" 34-13/16" if 5/16" or 3/8" thickness is 31 35-7/8" 35-15/16" 36" required. ear. Series HW Series HWE ars earing ar Thickness earing ar Thickness 1/4" 5/16" 3/8" 1/4" 5/16" 3/8" -1/8" -3/16" -1/4" -5/8" -11/16" -3/4" 3 4" 4-1/16" 4-1/8" 5" 5-1/16" 5-1/8" 4 5-7/8" 5-15/16" 6" 7-3/8" 7-1/4" 7-5/16" 5 7-3/4" 7-13/16" 7-7/8" 9-3/4" 9-13/16" 9-7/8" 6 9-5/8" 9-11/16" 9-3/4" 1-1/8" 1-3/16" 1-1/4" 7 11-1/" 11-9/16" 11-5/8" 14-1/" 14-9/16" 14-5/8" 8 13-3/8" 13-7/16" 13-1/" 16-7/8" 16-15/16" 17" 9 15-1/4" 15-5/16" 15-3/8" 19-1/4" 19-5/16" 19-3/8" 10 17-1/8" 17-3/16" 17-1/4" 1-5/8" 1-11/16" 1-3/4" 11 19" 19-1/16" 19-1/8" 4" 4-1/16" 4-1/8" 1 0-7/8" 0-15/16" 1" 6-3/8" 6-7/16" 6-1/" 13-3/4" -13/16" -7/8" 8-3/4" 8-13/16" 8-7/8" 14 4-5/8" 4-11/16" 4-3/4" 31-1/8" 31-3/16" 31-1/4" 15 6-1/" 6-9/16" 6-5/8" 33-1/" 33-9/16" 33-5/8" 16 8-3/8" 8-7/16" 8-1/" 35-7/8" 35-15/16" 36" 17 30-1/4" 30-5/16" 30-3/8" 18 3-1/8" 3-3/16" 3-1/4" 19 34" 34-1/16" 34-1/8" 0 35-7/8" 35-15/16" 36" on't forget fasteners p.! All other widths are cut-to-size. EXPLANATORY NOTES FOR TALES HW/HW/HWE Symbols and weights shown for gratings having cross bars spaced at 4" centers. For gratings having cross bars at " centers add suffix - to item number. Increase tabulated weight to 1.1# for the 1/4" HW bearing bar sizes and # for the 3/8" HW bearing bar sizes. Supplementary cross bars can be installed in pairs on the underside of gratings with depths of 3" or more, when specified. These additional bars provide extra load distribution and lateral stability to the carrying members. For short spans, one set located at mid-point. For greater spans, two or three pairs depending upon spacing of supports. Where gratings are subjected to extremely heavy loading conditions, or rolling loads at 90 degrees to bearing bars, further assurance of satisfactory performance can be obtained by trim banding the ends of panels. Such band bars are usually 1/4" thick and 1/" less than the depth of the grating and welded flush with the top of the grating. anding must be specified. Heavy Weld Series GH (19W4) Series GH- (19W) NOTE: GH and GH- is produced via the electroforge process. This grating is not normally used for standard floor layouts, but is usually selected by engineers for rolling or vehicular loads for narrow space work. Theoretical values based on F = 0,000 psi. E = 30,000 psi. gross section of bearing bar. SYMOL- SPAING Series HW (W4) Series HW- (W) Series HW (30W4) Series HW- (30W) Series HWE (38W4) Series HWE- (38W) earing SERIES GH and GH- SPAN Load Table arsize 1'-0" 1'-6" '-0" '-6" 3'-0" 3'-6" 4'-0" 4'-6" 5'-0" 5'-6" 6'-0" 6'-6" 7'-0" 7'-6" 8'-0" 1" x 1/4" 1-1/4" 1-1/" 1-3/4" " x 1/4" -1/" 3" x 1/4" 3-1/" 4" x 1/4" earing ar Size -1/" 3" 3-1/" 4" -1/" 3" 3-1/" 4" x1/4" -1/" 3" x 1/4" 3-1/" 4" x 1/4" 5615 495 1404 898 64 458 351 77 5 186 156 133 115 100 88.00.046.08.19.186.53.331.418.518.67.745.875 1.017 1.166 1.38 807 187 1404 113 936 80 70 64 561 510 468 43 401 374 351.016.037.066.103.149.0.64.335.413.500.596.699.811.930 1.059 877 3899 193 1404 975 716 548 433 351 90 44 08 179 156 137.016.037.066.103.149.0.64.335.413.500.596.700.810.931 1.058 4386 94 193 1754 146 153 1097 975 877 797 731 675 67 585 548.013.09.05.08.119.16.11.68.330.400.476.559.649.745.847 163 5614 3158 01 1404 1031 790 64 505 418 351 99 58 5 197.013.031.055.086.14.168.0.79.344.417.496.58.676.777.881 6316 411 3158 56 105 1805 1579 1404 163 1148 1053 97 90 84 790.011.04.044.068.099.135.176.3.75.333.397.466.540.60.706 17193 7641 498 751 1910 1404 1075 849 688 568 478 407 351 306 69.011.06.047.073.106.144.189.39.95.357.45.499.579.665.757 8597 5731 498 3439 866 456 149 1910 1719 1563 1433 133 18 1146 1075.009.01.037.059.085.115.151.191.36.86.340.399.463.531.605 456 9980 5614 3593 495 1833 1404 1109 898 74 64 53 458 399 351.010.03.041.064.093.16.165.09.58.31.37.437.506.581.66 118 7485 5614 4491 3743 308 807 495 46 041 1871 177 1604 1497 1404.008.018.033.051.074.101.13.167.06.50.97.349.405.465.59 35088 15595 877 5614 3899 864 193 1733 1404 1160 975 830 716 64 548.008.018.033.051.074.101.13.167.06.50.98.349.405.465.59 17544 11696 877 7018 5848 5013 4386 3899 3509 3190 94 699 506 339 193.006.014.06.041.059.081.105.134.165.00.38.79.34.37.43 5057 456 163 8084 5614 415 3158 495 01 1670 1404 1196 1031 898 789.006.015.07.043.06.084.110.139.17.08.48.91.337.387.441 563 1684 163 10105 841 718 6316 5614 5053 4593 411 3887 3609 3368 3158.005.01.0.034.049.067.088.111.137.166.198.33.70.310.353 6877 30565 17193 11004 7641 5614 498 3396 751 73 1910 168 1404 13 1075.005.013.03.036.053.07.094.119.147.178.1.49.89.33.378 34386 94 17193 13754 1146 985 8597 7641 6877 65 5731 590 491 4585 498.004.010.018.09.04.057.075.095.118.143.170.199.31.66.30 8985 399 456 1437 9981 7333 5614 4436 3593 969 495 16 1833 1597 1404.005.011.00.03.046.063.08.104.19.156.186.18.53.90.331 44913 994 456 17965 14971 183 18 9981 8983 8166 7485 6910 6416 5988 5614.004.009.016.05.037.050.066.083.103.15.148.174.0.3.64 HEAVY WEL 1/4" EARING AR LOA TAL E Wt Lbs Sq Ft SERIES HW EARING ARS 1-3/8" center to center 1'-0" 1'-6" '-0" '-6" 3'-0" 3'-6" 4'-0" 4'-6" 5'-0" 5'-6" 6'-0" 7'-0" 8'-0" 8499 1666 715 4560 3167 36 1781 1407 1140 94 79 58 445 0.6 1449 9500 715 5700 4750 4071 356 3167 850 591 375 036 1781 4.4 8.3 41041 1841 1060 6567 4560 3350 565 07 164 1356 1140 838 641 050 13680 1060 808 6840 5863 5130 4560 4104 3731 340 93 565 5587 4831 13967 8939 608 4561 349 759 35 1847 155 1140 873 7936 1863 13967 11174 931 7981 6984 608 5587 5079 4656 3991 349 7960 3474 1870 1169 8119 5967 4568 3608 93 416 030 1491 114 3. 36480 430 1840 1459 1160 1043 910 8107 796 6633 6080 511 4560 SERIES HW EARING ARS 1-7/8" center to center 1874 97 5468 3500 430 1786 1367 1080 875 73 608 446 34 15.9 10937 791 5468 4375 3646 315 734 430 187 1989 183 156 1367 31500 14000 7875 5040 3500 571 1969 1556 160 1041 875 643 49 18.8 15750 10500 7875 6300 550 4500 3938 3500 3150 864 65 50 1969 488 190591071 6861 4765 3501 680 118 1715 1418 1191 875 670 1.8 1441 14941071 8577 7147 616 5361 4765 488 3898 3574 3063 680 56004 488914001 8961 61 4574 3500 766 40 1850 1556 1143 875 4.7 800 18668140011101 9334 7999 7000 61 5600 509 4667 4000 3500 SERIES HWE EARING ARS -3/8" center to center 17186 7638 497 750 1910 1403 1074 849 687 568 477 351 69 1.5 8593 579 497 3437 864 455 148 1910 1719 156 143 18 1074 475011000 6188 3960 750 00 1547 1 990 818 688 505 387 14.8 1375 850 6188 4950 415 3536 3094 750 475 50 063 1768 1547 3369414975 843 5391 3744 750 106 1664 1348 1114 936 688 56 17.1 168471131 843 6739 5616 4813 41 3744 3369 3063 806 407 106 440041955611001 7041 4888 3593 750 173 1760 1454 1 896 688 19.3 001466811001 8801 7334 685 5501 4888 4400 4001 3667 3144 750 Our website now in English and Spanish! 1-800-37-380 010
More aluminum choices are shown on p.6! *" spacing also available SERIES (19SG4) GAL (19SG) GAL- (15SG4*) SGAL 11SG4 11SG 7SG4 7SG Locked by Swaging ar Spacing earing ar Size Item No. #/SF Item No. #/SF Item No. #/SF Item No. #/SF Item No. #/SF Item No. #/SF Item No. 1" x 1/8" GAL-100A 1.7 GAL-100A-.0 SGAL-100A.1 11SG4-100A.8 11SG-100A 3.1 7SG4-100A 4.3 7SG-100A 1" x 3/16" GAL-100.5 GAL-100-.8 SGAL-100 3.1 11SG4-100 4.1 11SG-100 4.4 7SG4-100 6.3 7SG-100 1-1/4" x 1/8" GAL-15A.1 GAL-15A-.4 SGAL-15A.8 11SG4-15A 3.5 11SG-15A 3.8 7SG4-15A 5.3 1-1/4" x 3/16" GAL-15 3.0 GAL-15-3.3 SGAL-15 3.8 11SG4-15 5.0 11SG-15 5.3 7SG4-15 7.8 7SG-15 1-1/" x 1/8" GAL-150A.5 GAL-150A-.8 SGAL-150A 3.1 11SG4-150A 4.1 11SG-150A 4.4 7SG4-150A 6.3 7SG-150A 1-1/" x 3/16" GAL-150 3.6 GAL-150-3.9 SGAL-150 4.5 11SG4-150 6.0 11SG-150 6.3 7SG4-150 9.3 7SG-150 1-3/4" x 3/16" GAL-175 4.1 GAL-175-4.4 SGAL-175 5. 11SG4-175 7. 11SG-175 7.5 7SG4-175 10.8 7SG-175 " x 3/16" GAL-00 4.7 GAL-00-5.0 SGAL-00 5.9 11SG4-00 7.9 11SG-00 8. 7SG4-00 1.3 7SG-00-1/4" x 3/16" GAL-5 5.3 GAL-5-5.6 SGAL-5 6.6 11SG4-5 8.9 11SG-5 9. 7SG4-5 13.8 7SG-5-1/" x 3/16" GAL-50 5.8 GAL-50-6.1 SGAL-50 7.3 11SG4-50 9.8 11SG-50 10.1 7SG4-50 15.3 7SG-50 ALMINM PLAIN STAINLESS 1" x 3/16" 19-SGS-100 7.0 19-SGS-100-7.6 15SGS-100 8.8 11SGS-100 11.7 11SGS-100-1.3 7-SGS-100 18.1 7-SGS-100-18.7 1-1/4" x 3/16" 19-SGS-15 8.6 19-SGS-15-9. 15SGS-15 10.8 11SGS-15 14.5 11SGS-15-15.1 7-SGS-15.5 7-SGS-15-3.1 1-1/" x 3/16" 19-SGS-150 10.3 19-SGS-150-10.9 15SGS-150 1.8 11SGS-150 17.3 11SGS-150-17.9 7-SGS-150 6.8 7-SGS-150-7.4 1-3/4" x 3/16" 19-SGS-175 11.9 19-SGS-175-1.5 15SGS-175 14.9 11SGS-175 0.1 11SGS-175-0.7 7-SGS-175 31. 7-SGS-175-31.8 " x 3/16" 19-SGS-00 13.5 19-SGS-00-14.1 15SGS-00 16.9 11SGS-00.9 11SGS-00-3.5 7-SGS-00 35.6 7-SGS-00-36. -1/4" x 3/16" 19-SGS-5 15.1 19-SGS-5-15.7 15SGS-5 19.0 11SGS-5 5.6 11SGS-5-6. 7-SGS-5 39.9 7-SGS-5-40.5-1/" x 3/16" 19-SGS-50 16.7 19-SGS-50-17.3 15SGS-50 1.0 11SGS-50 8.4 11SGS-50-9.0 7-SGS-50 44.3 7-SGS-50-44.9 1" x 3/16" 19-SGSS-100 7. 19-SGSS-100-7.8 15SGSS-100 9.0 11SGSS-100 1.0 11SGSS-100-1.6 7-SGSS-100 18.5 7-SGSS-100-1-1/4" x 3/16" 19-SGSS-15 8.8 19-SGSS-15-9.4 15SGSS-15 11.0 11SGSS-15 14.8 11SGSS-15-15.4 7-SGSS-15 3.0 7-SGSS-15-1-1/" x 3/16" 19-SGSS-150 10.5 19-SGSS-150-11.1 15SGSS-150 13.1 11SGSS-150 17.7 11SGSS-150-18.3 7-SGSS-150 7.4 7-SGSS-150-1-3/4" x 3/16" 19-SGSS-175 1.1 19-SGSS-175-1.7 15SGSS-175 15. 11SGSS-175 0.5 11SGSS-175-1.1 7-SGSS-175 31.9 7-SGSS-175- " x 3/16" 19-SGSS-00 13.8 19-SGSS-00-14.4 15SGSS-00 17.3 11SGSS-00 3.4 11SGSS-00-4.0 7-SGSS-00 36.4 7-SGSS-00- -1/4" x 3/16" 19-SGSS-5 15.5 19-SGSS-5-16.1 15SGSS-5 19.5 11SGSS-5 6.3 11SGSS-5-6.9 7-SGSS-5 41.1 7-SGSS-5- -1/" x 3/16" 19-SGSS-50 17.1 19-SGSS-50-17.7 15SGSS-50 1.5 11SGSS-50 9.1 11SGSS-50-9.7 7-SGSS-50 45.4 7-SGSS-50- Gratings that meet the spacing requirements of the American isabilities Act (AA) are noted with this symbol. Size of bearing bar may affect AA compliance. If you do not see the AA symbol, please inquire. #/SF 4.6 6.6 8.1 6.6 9.6 11.1 1.6 14.1 15.6 19.1 3.6 8.0 3.5 37.0 41.7 46.0 For industrial corrosion applications! Locked by Swaging Fast ut-to-size ONSTRTION: ross bars locked by swaging MATERIAL: Plain Steel (Galvanized, optional) Stainless Steel 304, 316 Aluminum (mill finish) HEIGHTS: 1" to -1/" WITHS: ' or 3' LENGTHS: 4' AR THIKNESS: 3/16" Steel, 3/16" or 1/8" Aluminum AR SPAINGS: 7/16" to 1-3/16" SRFAE: Smooth (stock) or serrated Not recommended for wheel traffic. Available by special order. earing ar Stability Suitable for Wheel Traffic This grating works well for platforms! ONSTRTION: Formed with cold driven rivets under hydraulic pressure MATERIAL: Plain Steel Aluminum LENGTH: 0' Available by special order. Riveted Grating - GO Series Steel Series Spacing & esign GM FF/ GQ FF/ 7" 7" 1-1/8" 3/4" GO FF/ GR FF/ 3-1/" 3-1/" 1-1/8" 3/4" GWH GV 5" 7" FF/ 1-5/8" FF/ -5/16" earing GM GO GQ GR GWH GV ar Size Item No. #/SF Item No. #/SF Item No. #/SF Item No. #/SF Item No. #/SF Item No. #/SF 3/4" x 1/8" GM-75A 6.5 GO-75A 7.0 GQ-75A 9.0 GR-75A 7.9 GWH-75A 4.9 GV-75A 3.7 3/4" x 3/16" GM-75 8.0 GO-75 8.5 GQ-75 10.4 GR-75 9.7 GWH-75 5.9 GV-75 4.5 1" x 1/8" GM-100A 7.5 GO-100A 8.0 GQ-100A 10.5 GR-100A 11.1 GWH-100A 5.7 GV-100A 4.7 1" x 3/16" GM-100 9.0 GO-100 9.5 GQ-100 1.5 GR-100 13. GWH-100 7.0 GV-100 5.7 1-1/4" x 1/8" GM-15A 8.5 GO-15A 9.0 GQ-15A 1.0 GR-15A 1.6 GWH-15A 6.5 GV-15A 5.4 1-1/4" x 3/16" GM-15 10.5 GO-15 11.1 GQ-15 14.7 GR-15 15.3 GWH-15 8.1 GV-15 6.7 1-1/" x 1/8" GM-150A 9.5 GO-150A 10.1 GQ-150A 13.5 GR-150A 14. GWH-150A 7.3 GV-150A 6.0 1-1/" x 3/16" GM-150 1.0 GO-150 1.5 GQ-150 16.8 GR-150 17.4 GWH-150 9. GV-150 7.5 1-3/4" x 3/16" GM-175 13.5 GO-175 14.0 GQ-175 18.8 GR-175 19.4 GWH-175 10.4 GV-175 8.3 " x 3/16" GM-00 16.0 GO-00 17.0 GQ-00.9 GR-00 3.3 GWH-00 1.3 GV-00 9.8-1/4" x 3/16" GM-5 17.5 GO-5 18.5 GQ-5 5.0 GR-5 5.4 GWH-5 13.3 GV-5 10.7-1/" x 3/16" GM-50 19.0 GO-50 0.0 GQ-50 7.1 GR-50 7.8 GWH-50 14.4 GV-50 11.6 010 Our ordering process is efficient and easy! 1-800-37-380 Rivet earing ar Truss design is safe and sturdy! Reticuline or crimp bar
High Strength-to-Weight Ratio Minimum eflection Installation Ease Resistant to hemical onditions Aluminum Grating GAL SGAL Rectangular ar GIA SGIA I-ar More hoices on p.5! SFT Rectangular ar Flush Top ONSTRTION: GAL, SGAL, GIA, SGIA: Locked by Swaging SFT, SFT-: Press-Locked MATERIAL: Aluminum* *If alloy is critical to application, please specify when ordering. HEIGHTS: 1" to -1/" available WITHS: 4" or 36" GAL, GIA - Now in 39.394" width! LENGTHS: 4' AR THIKNESS: 1/8" or 3/16" Not recommended for wheel traffic or barefoot pedestrian. Available by special order! Fast ut-to- Size Fasteners p.! ALMINM GRATING WITHS 3/16" earing ars Rectangular ar I-ar No SFT, SFT-, GAL SGAL, SGAL- ars GAL-, GAA, G G, G GIA, GIA- SGIA 1-3/8" 1-1/8" 1-7/16" 1-3/16" 3-9/16" -1/16" -5/8" -1/8" 4 3-3/4" 3" 3-13/16" 3" 5 4-15/16" 3-15/16" 5" 3-15/16" 6 6-1/8" 4-7/8" 6-3/16" 4-13/16" 7 7-5/16" 5-13/16" 7-3/8" 5-3/4" 8 8-1/" 6-3/4" 8-9/16" 6-11/16" 9 9-11/16" 7-11/16" 9-3/4" 7-9/16" 10 10-7/8" 8-5/8" 10-15/16" 8-1/" 11 1-1/16" 9-9/16" 1-1/8" 9-7/16" 1 13-1/4" 10-1/" 13-5/16" 10-5/16" 13 14-7/16" 11-7/16" 14-1/" 11-1/4" 14 15-5/8" 1-3/8" 15-11/16" 1-3/16" 15 16-13/16" 13-5/16" 16-7/8" 13-1/16" 16 18" 14-1/4" 18-1/16" 14" 17 19-3/16" 15-3/16" 19-1/4" 14-15/16" 18 0-3/8" 16-1/8" 0-7/16" 15-13/16" 19 1-9/16" 17-1/16" 1-5/8" 16-3/4" 0-3/4" 18" -13/16" 17-5/8" 1 3-15/16" 18-15/16" 4" 18-9/16" 5-1/8" 19-7/8" 5-3/16" 19-1/" 3 6-5/16" 0-13/16" 6-3/8" 0-3/8" 4 7-1/" 1-3/4" 7-9/16" 1-5/16" 5 8-11/16" -11/16" 8-3/4" -1/4" 6 9-7/8" 3-5/8" 9-15/16" 3-3/16" 7 31-1/16" 4-9/16" 31-1/8" 4-1/16" 8 3-1/4" 5-1/" 3-5/16" 5" 9 33-7/16" 6-7/16" 33-1/" 5-15/16" 30 34-5/8" 7-3/8" 34-11/16" 6-13/16" 31 35-13/16" 8-5/16" 35-7/8" 7-3/4" 3 educt 1/16" 9-1/4" 8-11/16" lose 33 from widths 30-3/16" 9-9/16" 34 Mesh shown for 31-1/8" 30-1/" 35 1/8" bearing 3-1/16" p.8 31-7/16" 36 bars. 33" Inquire on 3-5/16" 37 33-15/16" number 33-1/4" of bars 38 34-7/8" 34-3/16" STOK for 39.394" 39 35-13/16" wide 35-1/16" 40 grating 36" I-ar Aluminum Rectangular ar SERIES GAL (19SG4) GAL- (19SG) SGAL (15SG4) SGAL- (15SG) SFT* SFT-* ar Spacing earing # # # # # # ar Size Item No. SF Item No. SF Item No. SF Item No. SF Item No. SF Item No. SF 1" x 1/8" GAL-100A 1.7 GAL-100A-.0 SGAL-100A.1 SGAL-100A-.4 SFT-100A 1.9 SFT-100A-.3 1" x 3/16" GAL-100.5 GAL-100-.8 SGAL-100 3.1 SGAL-100-3.4 SFT-100.7 SFT-100-3.1 1-1/4" x 1/8" GAL-15A.1 GAL-15A-.4 SGAL-15A.8 SGAL-15A- 3.1 SFT-15A.3 SFT-15A-.7 1-1/4" x 3/16" GAL-15 3.0 GAL-15-3.3 SGAL-15 3.8 SGAL-15-4.1 SFT-15 3.3 SFT-15-3.7 1-1/" x 1/8" GAL-150A.5 GAL-150A-.8 SGAL-150A 3.1 SGAL-150A- 3.4 SFT-150A.8 SFT-150A- 3. 1-1/" x 3/16" GAL-150 3.6 GAL-150-3.9 SGAL-150 4.5 SGAL-150-4.8 SFT-150 4.0 SFT-150-4.4 1-3/4" x 3/16" GAL-175 4.1 GAL-175-4.4 SGAL-175 5. SGAL-175-5.5 SFT-175 4.6 SFT-175-5.0 " x 3/16" GAL-00 4.7 GAL-00-5.0 SGAL-00 5.9 SGAL-00-6. SFT-00 5.3 SFT-00-5.7-1/4" x 3/16" GAL-5 5.3 GAL-5-5.6 SGAL-5 6.6 SGAL-5-6.9 SFT-5 5.8 SFT-5-6. -1/" x 3/16" GAL-50 5.8 GAL-50-6.1 SGAL-50 7.3 SGAL-50-7.6 SFT-50 6.5 SFT-50-6.9 SERIES GIA GIA- SGIA SGIA- SFT Series Press-Locked 1" GIA-100 1.9 GIA-100-.1 SGIA-100.3 SGIA-100-.5 grating is available by 1-1/4" GIA-15.3 GIA-15-.5 SGIA-15.8 SGIA-15-.9 special order with bearing bar spacings of 7/16", 11/16" 1-1/" GIA-150.6 GIA-150-.8 SGIA-150 3. SGIA-150-3.4 or 15/16". 1-3/4" GIA-175 3.0 GIA-175-3.3 SGIA-175 3.7 SGIA-175-3.9 GAL Series is available by " GIA-00 3.4 GIA-00-3.7 SGIA-00 4. SGIA-00-4.4 special order in spacings of -1/4" GIA-5 3.8 GIA-5-4.0 SGIA-5 4.6 SGIA-5-4.9 7/16", 1/", and 11/16". -1/" GIA-50 4.0 GIA-50-4. SGIA-50 4.9 SGIA-50-5.1 Please see page 5. ALMINM GRATING LOA TALE SERIES: GAL, GAL-, GIA, GIA-, SFT, SFT-, GAA & G earing 1-3/16" EARING AR ENTERS ar Size 1" x 1/8" 1" x 3/16" or 1" I-bar 1-1/4" x 1/8" 1-1/4" x 3/16" or 1-1/4" I-bar 1-1/" x 1/8" 1-1/" x 3/16" or 1-1/" I-bar 1-3/4" x 3/16" or 1-3/4" I-bar " x 3/16" or " I-bar -1/4" x 3/16" or -1/4" I-bar -1/" x 3/16" or -1/" I-bar Span 1'0" '0" '6" 3'0" 3'6" 4'0" 4'6" 1684 41 69 187 137 105 83.036.144.5.34.439.574.77 84 41 337 81 41 11 187.09.115.180.59.353.46.583 56 63 404 81 06 158 15.036.144.5.34.440.576.730 163 63 505 41 361 316 81.09.115.180.59.353.461.584 5'0" 5'6" 6'0" 631 658 41 9 15 164 130 105 87 73.09.115.180.59.353.459.583.718.871 1.035 1316 658 56 439 376 39 9 63 39 19.03.09.144.08.8.369.466.576.696.88 3947 987 63 439 3 47 195 158 130 110 81.09.115.180.59.353.461.583.70.868 1.040 1.419 1974 987 789 658 564 493 439 395 359 39 8.03.09.144.07.8.368.467.576.697.830 1.19 3790 947 606 41 309 37 187 15 15 105 77 59.04.096.150.16.94.384.486.60.74.86 1.171 1.530 1895 947 758 63 541 474 41 379 345 316 71 37.019.077.10.173.35.307.389.480.58.691.94 1.9 5684 141 909 63 464 355 81 7 188 158 116 89.04.096.150.16.94.384.487.599.76.865 1.176 1.539 84 141 1137 947 81 711 63 568 517 474 406 355.019.077.10.173.35.307.389.480.581.69.941 1.8 7737 1934 138 860 63 484 38 309 56 15 158 11.01.08.19.185.5.39.417.514.63.741 1.009 1.318 3868 1934 1547 189 1105 967 860 774 703 645 553 484.016.066.103.148.0.63.333.41.498.593.807 1.054 10106 56 1617 113 85 63 499 404 334 81 06 158.018.07.113.16.1.88.364.450.544.649.881 1.153 5053 56 01 1684 1444 163 113 1011 919 84 7 63.014.058.090.130.176.30.9.360.436.518.706.9 1790 3197 046 141 1044 799 63 51 43 355 61 00.016.064.100.144.196.56.34.400.484.576.784 1.05 6395 3197 558 13 187 1599 141 179 1163 1066 914 799.013.051.080.115.157.05.59.30.387.461.68.819 15790 3947 56 1754 189 987 780 63 5 439 3 47.014.058.090.130.176.30.9.360.436.519.705.93 7895 3947 3158 63 56 1974 1754 1579 1435 1316 118 987.01.046.07.104.141.184.33.88.348.415.565.737 Signature service that exceeds expectations! 1-800-37-380 010 aution: When designing with serrated grating these loads should be reduced by the factors called out for serrated. Theoretical values based on f = 1,000 psi, E = 10,000,000 psi, gross section of bearing bar. = safe uniform load, lb./sq. ft. = deflection in inches = safe concentrated load, lb./ft. of grating width at mid span Note: The carrying capacity of a piece of grating subjected to a concentrated load over only a portion of its width is determined by the stiffness of both the bearing bars & the cross bars, and therefore varies with the type of grating used. To determine carrying capacity of gratings subject to such loadings, please call us for information. ONVERSION TALE Aluminum SGAL, SGAL- Locked by Swaging Locked by Swaging TO ETERMINE LOA FOR SERIES OTHER THAN SHOWN AOVE MLTIPLY TALE VALE Y LOA FATOR. NOTE: EFLETION NER FATORE LOAS REMAINS AS SHOWN IN TALE. GM-4, SGIA, SGIA- 11SG, GM GR SERIES G, G GM-1 GM- GM-3 11SG4 GM-5 GO GQ GWH LOA FATOR 1.7.7.35 1.9 1.7 1.45 1.15 1.61.8 span Press-Locked NOTE: Spans listed in shaded area produce a deflection of 1/4" or less under a uniform load of 100 pounds per square foot. This deflection is recommended as the maximum to provide pedestrian comfort. span 7'0" hart on Website span 8'0"
TOP VIEW LENGTH (SPAN IRETIONS) 1" 3" 1" Extruded H Plank ONNETING WE RAISE TRANSVERSE RI (TYP.) 4" 19" 3 This product is easily cut-to-size. H30 Series Style Rectangular Punched EN VIEWS Style - Rectangular pset Pattern Style - Square pset Pattern Style A - Rectangular Plain Pattern Style - Square Plain Pattern Standard Fastening Method EN ANING is recommended on shop assembled panels. It is advisable that shop assembled widths not exceed 3' 0" long (span direction). H RS SLOT - 1-1/" TRS. Height Ped Span Inches 3/4" 39" H0 1" 49" H30 1-1/4" 58" H40 1-1/" 67" H50 1-3/4" 75" H60 " 83" H70-1/4" 91" H80-1/" 97" H90 H RS SLOT - 3/4" TRS. ALMINM PLANK H & H RS SERIES ALMINM H & H RS Series Product etails Pattern Rectangular Square H RS 3/4" trs. H RS 1-1/" trs. Item# Height #/SF #/SF #/SF #/SF H0 3/4" 1.8.0.03.11 H30 1"..4.43.51 H40 1-1/4".8 3.0 3.03 3.11 H50 1-1/" 3.4 3.6 3.63 3.71 H60 1-3/4" 4.0 4. 4.3 4.31 H70 " 4.5 4.7 4.73 4.81 H80-1/4" 5.0 5.3 5.33 5.41 H90-1/" 5.5 5.7 5.73 5.81 STOK lear Span '0" '6" 3'0" 3'6" 4'0" 4'6" 5'0" 5'6" 6'0" 6'6" 7'0" 8'0" 435 78 193 14 108 85 69 = safe uniform load, lb./sq.ft..11.37.34.465.608.770.950 = safe concentrated load, lb/ft 435 348 90 48 17 193 174 of grating width at mid span.11.190.73.371.485.614.760 = deflection in inches 833 533 370 7 08 164 133 110 9.14.193.79.380.496.68.775.938 1.117 833 666 555 476 416 370 333 30 77.099.155.3.304.396.50.60.748.891 LOA TALE Loads and deflections given in this table are theoretical, and are based on a unit stress of 1,000 psi. 1464 936 650 478 366 89 34 193 16 138 119 91.107.167.41.38.48.54.669.810.964 1.131 1.31 1.714 1464 1171 976 836 73 650 585 53 488 450 418 366.085.133.19.6.34.433.535.647.771.904 1.049 1.371 167 1387 963 707 541 48 346 86 40 05 176 135.090.141.03.77.36.458.566.684.815.956 1.109 1.449 167 1734 1445 138 1083 963 867 788 7 666 619 541.07.113.163.1.89.366.45.547.651.764.887 1.157 99 1915 1330 977 748 591 478 395 33 83 44 187.078.13.177.41.315.398.49.595.708.83.964 1.60 99 394 1995 1710 1496 1330 1197 1088 997 90 855 748.06.098.141.19.51.318.393.476.566.664.771 1.007 3975 544 1766 198 993 785 636 55 441 376 34 48.069.108.156.1.77.351.433.54.64.73.849 1.109 3975 3180 650 71 1987 1766 1590 1445 135 13 1135 993.055.086.14.169.1.80.346.419.499.586.679.887 5109 370 70 1668 177 1009 817 675 567 483 417 319.061.095.137.187.44.309.38.46.550.646.749.979 5109 4087 3406 919 554 70 043 1858 1703 157 1459 177.048.076.110.149.195.47.305.370.440.517.599.783 5971 381 654 1949 149 1179 955 789 663 565 487 373.055.086.14.169.1.79.345.418.497.584.677.884 5971 4777 3981 341 985 654 388 171 1990 1837 1706 149.044.069.099.135.176.3.76.334.398.467.541.707 NOTE: Spans in the shaded area produce a deflection 1/4" or less under a uniform load of 100 lbs./sq. ft. This is the maximum deflection to afford pedestrian comfort. The actual Ped (pedestrian) Span under this condition is shown in load table for each size of grating. Style Rectangular pset Pattern-STOK ONSTRTION: Extruded Plank MATERIAL: Aluminum HEIGHTS: 1", 1-1/" STOK 3/4", 1-1/4", 1-3/4", ", -1/4", -1/" OPEN AREA: 37% - H30 Series WITHS: 6" (or tackwelded to 36" width) LENGTHS: 0' STOK 4' or 6' (special order) SRFAE: Rectangular Punched STOK (Solid, square or round holes by special order) Interlocking sides channel available in H30 (1" high only) STAIR TREAS: Available with standard carrier plates and nosing. When plank portion of the tread is not an even multiple of 6", the remaining portion is made up by slitting a 6" plank. H RS Series with 45 Angle Slot Punched with 45º angle.5" x.70" slot on 3/4" or 1-1/" centers. HEIGHTS: 3/4" - -1/" OPEN AREA: 3/4" centers 15% OA 1-1/" centers 8% OA Special Order High Strength Lightweight Economical onsider as an alternative to lose Mesh Grating! Not recommended for wheel traffic. ONSTRTION: Extruded T-ars with cross bars locked by swaging Treads available MATERIAL: Aluminum Please inquire. HEIGHTS: 1", 1-1/4", 1-1/", " WITHS: 36-1/4" (T-66).5156" spacing 36-9/16" (T-940).475" spacing LENGTH: 4' STOK SRFAE: Groove or GRIP TIGHT Other bar sizes and spacing available ask us! Extruded T-ar Series Height crossbar EN VIEW Item No. Open Item No. Open Height T-66 #/SF Area T-940 #/SF Area 1".66.5615.7 47.%.940.475 3.0 0.8% 1-1/4".5615 3.3 47.%.475 4. 0.8% 1-1/".5615 3.6 47.%.475 4.4 0.8% ".5615 4.1 47.%.475 5.0 0.8% STOK For pedestrian traffic T-940 1-1/4" Height Shown 010 elivery that meets your needs! 1-800-37-380
lose Mesh ONSTRTION: MATERIAL: HEIGHTS: Good Ventilation Need fasteners? See p. Press-Locked lose Spacings Available Easy Access Some AA hoices Rectangular ar Press-Locked Aluminum Plain Steel Stainless Steel 304 (mill finish) 3/4" to -1/" (see chart above right) See chart at right SERIES GM-5 (13P4) GM-4 (11P4) GM-3 (10P4) GM- (8P4) GM-1 (7P4) lose Mesh Steel ar Spacing earing ar Size Item No. #/SF Item No. #/SF Item No. #/SF Item No. #/SF Item No. #/SF 3/4" x 1/8" GM-5-75A 5.5 GM-3-75A 6.9 GM--75A 8.6 3/4" x 3/16" GM-5-75 7.8 GM--75 1.3 GM-4-75 9.0 GM-1-75 13.7 1" x 1/8" GM-5-100A 7.1 GM-3-100A 9.0 GM--100A 11.5 1" x 3/16" GM-5-100 10. GM-4-100 11.9 GM--100 16.5 GM1-100 18.1 1-1/4" x 1/8" GM-5-15A 8.9 GM-3-15A 11. GM--15A 14. 1-1/4" x 3/16" GM-5-15 1.7 GM-4-15 14.8 GM--15 0.7 GM-1-15.6 1-1/" x 1/8" GM-5-150A 10.8 GM-3-150A 13.5 GM--150A 17. 1-1/" x 3/16" GM-5-150 15.3 GM-4-150 17.8 GM--150 5.0 GM-1-150 7. 1-3/4" x 3/16" GM-5-175 17.8 GM-4-175 0.8 GM--175 9.4 GM-1-175 31.6 " x 3/16" GM-5-00 0.5 GM-4-00 3.8 GM--00 33. GM-1-00 36. -1/4" x 3/16" GM-5-5.7 GM-4-5 6.5 GM--5 37.3 GM-5-5 40.1-1/" x 3/16" GM-5-50 5.0 GM-4-50 9.3 GM--50 41.1 STOK lose Mesh Alternative See SAFE-T-GRI Plank p.7 GM SERIES PANEL WITHS NO. OF GM-1 GM- GM-3 GM-4 GM- 5 ARS *3/16" *3/16" *1/8" *3/16" *1/8" *3/16" 10 4-1/8" 4-11/16" 5-3/4" 6-3/8" 7-7/16" 7-1/" 11 4-9/16" 5-3/16" 6-3/8" 7-1/16" 8-1/4" 8-5/16" 1 5" 5-11/16" 7" 7-3/4" 9-1/16" 9-1/8" 13 5-7/16" 6-3/16" 7-5/8" 8-7/16" 9-7/8" 9-15/16" 14 5-7/8" 6-11/16" 8-1/4" 9-1/8" 10-11/16" 10-3/4" 15 6-5/16" 7-3/16" 8-7/8" 9-13/16" 11-1/" 11-9/16" 16 6-3/4" 7-11/16" 9-1/" 10-1/" 1-5/16" 1-3/8" 17 7-3/16" 8-3/16" 10-1/8" 11-3/16" 13-1/8" 13-3/16" 18 7-5/8" 8-11/16" 10-3/4" 11-7/8" 13-15/16" 14" 19 8-1/16" 9-3/16" 11-3/8" 1-9/16" 14-3/4" 14-13/16" 0 8-1/" 9-11/16" 1" 13-1/4" 15-9/16" 15-5/8" 1 8-15/16" 10-3/16" 1-5/8" 13-15/16" 16-3/8" 16-7/16" 9-3/8" 10-11/16" 13-1/4" 14-5/8" 17-3/16" 17-1/4" 3 9-13/16" 11-3/16" 13-7/8" 15-5/16" 18" 18-1/16" 4 10-1/4" 11-11/16" 14-1/ " 16" 18-13/16" 18-7/8" 5 10-11/16" 1-3/16" 15-1/8" 16-11/16" 19-5/8" 19-11/16 " 6 11-1/8" 1-11/16" 15-3/4" 17-3/8" 0-7/16" 0-1/" 7 11-9/16" 13-3/16" 16-3/8" 18-1/16" 1-1/4" 1-5/16" 8 1" 13-11/16" 17" 18-3/4" -1/16" -1/8" 9 1-7/16" 14-3/16" 17-5/8" 19-7/16" -7/8" -15/16" 30 1-7/8" 14-11/16" 18-1/4" 0-1/8" 3-11/16" 3-3/4" 31 13-5/16" 15-3/16" 18-7/8" 0-13/16" 4-1/" 4-9/16" 3 13-3/4" 15-11/16" 19-1/" 1-1/" 5-5/16" 5-3/8" 33 14-3/16" 16-3/16" 0-1/8" -3/16" 6-1/8" 6-3/16" 34 14-5/8" 16-11/16" 0-3/4" -7/8" 6-15/16" 7" 35 15-1/16" 17-3/16" 1-3/8" 3-9/16" 7-3/4" 7-13/16" 36 15-1/" 17-11/16" " 4-1/4" 8-9/16" 8-5/8" 37 15-15/16" 18-3/16" -5/8" 4-15/16" 9-3/8" 9-7/16" 38 16-3/8" 18-11/16" 3-1/4" 5-5/8" 30-3/16" 30-1/4" 39 16-13/16" 19-3/16" 3-7/8" 6-5/16" 31" 31-1/16" 40 17-1/4" 19-11/16" 4-1/" 7" 31-13/16" 31-7/8" 41 17-11/16" 0-3/16" 5-1/8" 7-11/16" 3-5/8" 3-11/16" 4 18-1/8" 0-11/16" 5-3/4" 8-3/8" 33-7/16" 33-1/" 43 18-9/16" 1-3/16" 6-3/8" 9-1/16" 34-1/4" 34-5/16" 44 19" 1-11/16" 7" 9-3/4" 35-1/16" 35-1/8" 45 19-7/16" -3/16" 7-5/8" 30-7/16" 46 19-7/8" -11/16" 8-1/4" 31-1/ 8" Meets the spacing requirements of the American isabilities Act. NO. OF GM-1 GM- GM-3 GM-4 ARS *3/16" *3/16" *1/8" *3/16" 47 0-5/16" 3-3/16" 8-7/8" 31-13/16" 48 0-3/4" 3-11/16" 9-1/" 3-1/" 49 1-3/16" 4-3/16" 30-1/8" 33-3/16" 50 1-5/8" 4-11/16" 30-3/4" 33-7/8" 51-1/16" 5-3/16" 31-3/8" 34-9/16" 5-1/" 5-11/16" 3" 35-1/4" 53-15/16" 6-3/16" 3-5/8" 54 3-3/8" 6-11/16" 33-1/4" 55 3-13/16" 7-3/16" 33-7/8" 56 4-1/4" 7-11/16" 34-1/" 57 4-11/16" 8-3/16" 35-1/8" 58 5-1/8" 8-11/16" 35-3/4" 59 5-9/16" 9-3/16" 60 6" 9-11/16" 61 6-7/16" 30-3/16" 6 6-7/8" 30-11/16" 63 7-5/16" 31-3/16" 64 7-3/4" 31-11/16" 65 8-3/16" 3-3/16" 66 8-5/8" 3-11/16" 67 9-1/16" 33-3/16" 68 9-1/" 33-11/16" 69 9-15/16" 34-3/16" 70 30-3/8" 34-11/16" 71 30-13/16" 35-3/16" 7 31-1/4" 35-11/16" 73 31-11/16" WITHS: LENGTH: 1' AR THIKNESS: 3/16" or 1/8" AR SPAINGS: 1/4" to 5/8" NOTE: No wheel traffic or barefoot pedestrian. Field cutting not recommended. Mill finish stainless appearance may not be esthetically suitable for all applications. Sandblasting results in a dark gray brushed appearance and is available by special order. 74 3-1/8" 75 3-9/16" 76 33" 77 33-7/16" 78 33-7/8" 79 34-5/16" 80 34-3/4" 81 35-3/16" 8 35-5/8" 83 36-1/16" Standard Press Locked Grating can be found on p.3 All other panel widths shown are cut-to-size. *Indicates bearing bar thickness For loading information refer to pages 3 & 6. hart shows maximum panel width. Information available for widths over 7 bars. For wider areas, grating will be made in two or more panels. Pedestrian friendly steps of close mesh grating add to the industrial feel of this museum. lose mesh bar grating works well as a protective cover for this building heat vent. lose mesh grating is used to drain this beach deck area. We are ISO ertified! 1-800-37-380 010
GRATING & ATWALK PROT ETAILS Style atwalk Fixed Span Load Table lear Span 3# Steel 3.14# Steel 4# Steel # Aluminum #/SF esign Sizes Opening Sizes Strand Size SW LW SWO LWO Thickness (Simple support) 4" 36" 48" lear Span 4" 36" 48" 75 100 500 165 60.50.0 4.7#.45.45.50 75 165 75 Steel 400 5 100.50.50.50.50.40.50 375 150 50 600 175 100.50.40.50 5#.40.40.50 375 155 75 Steel 540 310 140.50.50.50.45.50.50 350 150 50 800 300 115.40.45.50 6.5#.0.50.40 440 0 100 Steel 800 300 150.50.50.50.0.40.40 50 100 50 4.50# 300 150 100.50.50.50 Stainless.17.19.1 Width Overall Thickness Meshes Per Foot SW LW measurements are approximate and subject to mill tolerance % Open Area Standard Sheet Size SW x LW arbon Steel.00#.00# 1.5" 5.33" 1.000" 3.60".135".30".460" 10.5 77% Please Inquire 3.00# 3.00# 1.33" 5.33".940" 3.44".183".64".540" 9.5 60% 4' & 6' x 8' & 10' & 1' 10' x 6' 3.14# 3.14#.00" 6.00" 1.65" 4.88".50".31".656" 6 69% 4' & 6' x 8' & 10' 10' x 6' 4.00# 4.00# 1.33" 5.33".940" 3.44".15".300".618" 9.5 55% 4', 5' & 6' x 8' & 10' 10' x 6' 4.7# 4.7# 1.41" 4.00" 1.000".88".50".300".65" 8.5 3 58% 4' & 6' x 8' & 10' 10' x 6' 5.00# 5.00# 1.33" 6.5# 6.5# 1.41" 5.33" 5.33".813" 3.38".813" 3.38".50".31".331".350".655".715" 9 8.5.5.5 50% 50% 4', 5' & 6' x 8' & 10' & 1' 10' x 6' 4' & 6' x 8' & 10' 10' x 6' Aluminum.00#.00# 1.33" 5.33".940" 3.44".50".387".730" 9.5 48% 4' x 8' & 5' x 10' & 1' Stainless Steel Type 304 4.50# 4.50# 1.41" 4.00" 1.00".88".50".300".65" 8.5 3 58% 4' x 10' We have inventory to meet your application needs for shipment today! 4" AMPLIGRIP FLOORING LOA TALE Item No. SPAN '-0" '-6" 3'-0" 3'-6" 01 5.00 4.000 17.000 1.5#/sf.50".1.155.185 130.000 70.000 5.00 6.000 0.96".#/sf.1.155.185.15 The figures shown are panels, simply supported without angle surround. = niform Load atwalk Grating Load Table Steel lear Span 3" 30" 35" 4" 47" 54" 60" 50 lbs./lf 3.00 3.14 3.0 3.14 3.0 3.14 3.0 3.14 3.0 3.14 4.0 4.7 5.0 6.5 100 lbs./lf 3.00 3.14 3.0 3.14 3.0 3.14 4.0 4.7 5.0 6.5 7.0 7.0 150 lbs./lf 3.00 3.14 4.0 4.7 4.0 4.7 5.0 6.5 6.5 7.0 00 lbs./lf 3.00 3.14 4.0 4.7 4.7 5.0 6.5 7.0 7.0 50 lbs./lf 4.00 5.0 5.0 7.0 istance between 4.7 6.5 supports measured from inside edge of 4.00 5.0 6.5 300 lbs./lf 4.7 6.5 one support to inside edge of next support. 4.00 6.5 7.0 350 lbs./lf 4.7 The concentrated load deflections for the above selection chart do not exceed the 1/4" maximum deflection, and the generally accepted recommendation for normal pedestrian comfort. = eflection Attractive urable Lightweight Trouble Free Easy to Install Grating/atwalk Expanded grating/catwalk provides workers safe, secure footing on this sign walkway. STOK LIST - GRATING & ATWALK Style Stock Size.00# Aluminum 4' x 8' 3.00# Steel 4' x 8', 6' x 10' 3.14# Steel 4' x 8', 6' & 4' x 10' 4.00# Steel 4' x 8' & 10' 4.7# Steel 4' x 8' & 10', 10' x 3' 4.50# Stainless 4' x 10' 5.00# Steel 4' x 8' 6.5# Steel 4' x 8' 01 Item 01 =.50" Item 0 =.96".40" EN VIEW 0.15" 3.450" 1.350" TOP VIEW ONSTRTION: Extruded Shape MATERIAL: Aluminum 6063 T5 High Tensile HEIGHTS:.50" or.96" WITH: 4" LENGTH: 0' SPEIAL ORER Mat Grating-5# SF M Series 1" Pit Grating-7# SF P Series 1" Flange 5/8" Flange 1-1/8" SETION A (EN VIEW) SETION A Shown with optional flange (TOP VIEW) X' A A IRETION OF TRAFFI Y' 1" Stainless steel flange shown is not standard Please specify when ordering (1.4# linear ft.) Stainless Steel 304, Aluminum, ronze.15" -.145" slot opening.071" x.177" wires, 90 relief angle earing ars 1" or " centers Electric resistance welded joints 300# load per square foot (pit grating) Information is available on optional Sub-frame and pan. SPEIAL ORER Mat Grating M Series 5#/SF Pit Grating P Series 7#/SF SS Frame 1.4#/LF With Without Size Sub-Frame Sub-Frame X Y ode ode 6' 4' M46 MG46 8' 4' M48 MG48 8' 4' P48 PG48 6' 4' P46 PG46 4' ' P4 PG4 ' ' P PG 8' 1' P18 PG18 4' 1' P14 PG14 Mat & Pit Grating Self leaning! Meets the spacing requirements AA. 010 on't forget the fasteners! 1-800-37-380
More tread styles p. 1, 17-18 End views for welded, press locked and swaged treads. Width 1-1/4" Grating TYPE A-STANAR orrugated Angle Nosing For aluminum treads only H Aluminum Stair Tread Extruded Plank p.7 ø 7/16" 1-1/8" im. A 7/16" x 1-7/16" slot Aluminum = -1/4" = 3" Steel = 1-3/4" = -1/" GRIP TIGHT (formerly known as Mebac ) nosing for welded treads. ontact us for more information! TYPE -STANAR heckered Plate Nosing For welded, press-locked steel treads TYPE -STANAR ast Abrasive Nosing Available in aluminum Steel is special order PERF-O GRIP Stair Tread More information p.11 Aluminum I-AR p.6 SAFE-T-GRI Stair Tread Extruded T-ar Series p.7 GRIP STRT Stair Tread More information p.15 FOR WELE, PRESS-LOKE, AN ALMINM TREAS GW/GAA/GAL SGW/G/SGAL GIA SGIA 1-3/16" c/c.. 15/16" c/c.. 1-3/16" c/c.. 15/16" c/c.. Width A Width A Width A Width A 5" -1/" 6" -1/" 5-1/16" -1/" 6-1/16" -1/" 6-3/16" -1/" 6-15/16" 4-1/" 6-1/4" -1/" 7" 4-1/" 7-3/8" 4-1/" 7-7/8" 4-1/" 7-7/16" 4-1/" 7-15/16" 4-1/" 8-9/16" 4-1/" 8-3/4" 4-1/" 8-5/8" 4-1/" 8-13/16" 4-1/" 9-3/4" 7" 9-11/16" 7" 9-13/16" 7" 9-3/4" 7" 10-15/16" 7" 10-5/8" 7" 11" 7" 10-11/16" 7" 1-1/8" 7" 11-1/" 7" 1-3/16" 7" 11-9/16" 7" Aluminum Steel REOMMENE EARING AR SIZES Rectangular ar 1-3/16" T I-ar 1-3/16" T earing ar Size Maximum Tread Length* Plain Serrated 1" x 3/16" '-4" 1" '-4" 1-1/4" x 3/16" '-10" '-7" 1-1/4" '-10" 1-1/" x 3/16" 3'-6" 3'-" 1-1/" 3'-6" 1-3/4" x 3/16" 4'-3" 3'-10" 1-3/4" 4'-3" 3/4" x 3/16" '-4" 1" x 3/16" 3'-5" '-10" 1-1/4" x 3/16" 4'-8" 4'-" 1-1/" x 3/16" 5'-6" 5'-3" earing ar Size Tread Length* *Maximum tread length based on 300 lb. concentrated load on front 5 in. of tread at center of tread length. Expanded Metal Treads TRATION TREA Stair Tread More information p.1 GRATE-LOK Stair Tread More information p.14 NEW! SPANISH HOTLINE! 1-800-37-91 1-813-87-4064 Fax ventas@mcnichols.com NOTE: Fiberglass grating will not provide lateral stiffness for stairs, struts and bracing should be provided on bottom flange of stringers. See p.19 for fiberglass resin information. HEAVY TY Stair Treads arbon Steel, or Galvanized Lengths 16" to 48" NITREA Stair Treads MS I-6015-T MS T-500-T Fiberglass Pultruded I- or T-ar MATERIAL: Pultruded polyester LENGTHS: Please advise resin RESIN: SPF HEIGHT: 1" or 1-1/" I-ar OLORS: Yellow or green " T-ar only SRFAE: Gritted or WITHS: I-ar 11" T-ar 1" Non-grit Max Span for 300 at Midspan Style MS I-6010-T MS I-6015-T MS T-500-T MS R-150-T 1/8" eflection or less 1/4" eflection or less 9" 37" 40" 5" 47" 59" 31" 38" MS R-150-T Fiberglass Molded Rectangular MATERIAL: Molded polyester resin HEIGHT: 1-1/" x 6" mesh WITHS: 7-5/8", 9-1/8", 10-5/8" LENGTHS: 1", 18", 4", 30", 36", 4" RESIN: SGF OLOR: Gray, Green SRFAE: Grit; non-grit See p.19-0 for more information on Fiberglass Gratings and Treads. Molded Fiberglass Stair Tread overs p.19! Nosings for Stair Treads and Landings - Stair treads and landing are produced by attaching a " deep nosing to the leading edge. This gives added strength and rigidity to the area that takes impact and abuse. In addition, the nosing provides more surface area for skid resistance, wear and better visibility. Gray stair treads with yellow nosing are available at additional cost. EN VIEW SPEIAL ORER Expanded Metal Treads Item Approx. Overall 1/4" eflect. No. Size A Ship Wt. Thickness Safe Load NITREA Stair Treads 4# 8-1/" x 4" 4-1/" 10.7# " 1000# 4# 8-1/" x 30" 4-1/" 1.9# " 95# 5# 9-3/4" x 30" 7" 16.# -1/8" 950# HEAVY TY Stair Treads 4# 8-1/" x 4" 4-1/" 1.8# -7/16" 1650# 4# 8-1/" x 30" 4-1/" 15.6# -7/16" 1100# 5# 9-3/4" x 30" 6" 18.6# -5/8" 105# We have the stair treads you need! 1-800-37-380 010
PERF-O GRIP Plank PERF-O GRIP Walkway Plank Walkway Treads 3/3" 3/3" 1" (Edge Margin) 1" " 7/16" 6", 3", 38" 4", 30", 36" PERF-O GRIP Plank 13 Ga. Steel LOA TALE lear Span Width #/LF Height '0" '6" 3'0" 3'6" 4'0" 4'6" 5'0" 5'6" 6'0" 7'0" 8'0" 9'0" 10'0" 11'0" 1'0" 008 187 895 659 505 400 35 69 7 168 130 103 85 70 60 0.05 0.08 0.11 0.15 0.0 0.5 0.31 0.38 0.45 0.6 0.8 1.04 1.30 1.57 1.90 5".6 1-1/" 836 670 559 481 41 375 338 308 84 44 16 194 176 16 150 0.04 0.06 0.09 0.1 0.16 0.0 0.5 0.30 0.36 0.49 0.65 0.83 1.04 1.7 1.5 1536 984 685 504 387 306 49 06 174 19 100 79 65 55 46 0.05 0.07 0.11 0.14 0.19 0.4 0.9 0.36 0.43 0.58 0.77 0.98 1. 1.51 1.81 7" 3.0 1-1/" 914 731 609 5 457 406 366 33 305 63 3 08 190 174 16 0.04 0.06 0.08 0.1 0.15 0.19 0.4 0.9 0.34 0.47 0.61 0.78 0.98 1.0 1.44 1965 1473 104 754 578 458 371 307 59 19 147 118 96 80 68 0.03 0.06 0.08 0.11 0.14 0.18 0.3 0.7 0.33 0.44 0.58 0.74 0.9 1.13 1.36 7" 3.3 " 1369 1096 913 783 685 609 548 498 456 391 344 308 79 57 37 0.03 0.05 0.07 0.09 0.1 0.15 0.18 0. 0.6 0.35 0.47 0.59 0.74 0.90 1.08 963 745 517 380 91 30 187 154 19 95 73 58 46 38 3 0.04 0.08 0.11 0.15 0.19 0.4 0.30 0.36 0.43 0.59 0.77 0.98 1.0 1.44 1.71 10" 3.5 1-1/" 855 684 645 554 485 431 388 353 33 77 4 16 191 176 16 0.03 0.05 0.09 0.1 0.15 0.19 0.4 0.9 0.35 0.47 0.61 0.78 0.95 1.16 1.39 1735 1110 771 568 435 344 81 3 196 144 110 88 70 60 50 0.04 0.06 0.08 0.11 0.15 0.18 0.3 0.8 0.33 0.45 0.59 0.75 0.91 1.14 1.34 10" 3.9 " 197 1038 865 741 648 645 584 53 489 4 368 37 97 67 45 0.0 0.04 0.05 0.08 0.10 0.15 0.18 0. 0.6 0.36 0.47 0.60 0.79 0.89 1.06 669 655 456 336 58 04 166 138 117 87 67 54 44 37 31 0.03 0.07 0.10 0.13 0.17 0. 0.7 0.33 0.40 0.55 0.7 0.9 1.16 1.43 1.68 1" 4.3 1-1/" 960 819 684 588 516 460 416 380 349 303 68 41 18 198 18 0.03 0.05 0.08 0.11 0.14 0.18 0. 0.6 0.3 0.44 0.58 0.74 0.91 1.11 1.3 1510 966 671 493 378 99 43 01 170 16 97 77 63 53 45 1" 4.6 " 0.03 0.05 0.07 0.10 0.13 0.16 0.0 0.5 0.9 0.40 0.53 0.68 0.85 1.03 1.5 144 1154 961 86 756 673 608 555 509 440 388 349 317 91 70 0.0 0.04 0.06 0.08 0.10 0.13 0.16 0.0 0.3 0.3 0.4 0.54 0.67 0.8 0.99 714 457 317 33 179 14 116 96 8 60 45 36 9 4 1 18" 5.7 1-1/" 0.04 0.07 0.10 0.13 0.17 0.1 0.6 0.3 0.39 0.5 0.68 0.86 1.05 1.7 1.56 964 771 64 551 495 481 434 397 366 314 74 43 0 199 183 0.03 0.04 0.07 0.09 0.1 0.17 0.1 0.6 0.31 0.4 0.55 0.69 0.85 1.03 1.3 107 686 476 350 68 1 173 143 11 90 69 55 44 36 31 18" 6.0 " 0.03 0.05 0.07 0.10 0.13 0.16 0.0 0.4 0.9 0.40 0.53 0.67 0.8 0.98 1.19 145 116 968 830 76 645 581 58 509 470 411 366 39 99 74 0.0 0.03 0.05 0.06 0.09 0.1 0.14 0.17 0. 0.3 0.4 0.53 0.65 0.79 0.94 PERF-O GRIP Walkway 11 Ga. Steel LOA TALE 4" 30" ± 1/16" 11.8 13.6 5" 5" A±1/16" PLANK EN VIEW 1-1/" 90 ±1 or " ±1/16" ± 1/16" WALKWAY EN VIEW A 1/16" (Raised Surface Width) PLANK TOP VIEW 1" 5"±1/8" 5751 3681 556 1878 1438 1136 90 760 639 469 359 84 30 190 160 0.0 0.0 0.04 0.05 0.06 0.08 0.10 0.1 0.14 0.19 0.5 0.31 0.39 0.47 0.56 9504 7603 6336 5431 475 44 380 3456 3168 715 376 11 1901 178 1584 0.01 0.01 0.0 0.03 0.04 0.05 0.06 0.07 0.08 0.11 0.15 0.19 0.3 0.8 0.34 3868 475 1719 163 967 764 619 511 430 316 4 191 155 18 107 0.01 0.0 0.03 0.04 0.05 0.06 0.08 0.10 0.1 0.16 0.0 0.6 0.3 0.39 0.46 9534 767 6356 5448 4767 437 3813 3467 3178 74 383 119 1907 1733 1589 0.01 0.01 0.0 0.03 0.04 0.05 0.06 0.07 0.08 0.11 0.15 0.19 0.3 0.8 0.33 PERF-O GRIP Plank Width etails 5" 7" 10" 1" 18" 4" 30" A 4-15/16" 6-15/16" 9-15/16" 11-15/16" 17-15/16" 3-15/16" 9-15/16" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 9/3" 7/16" 1/4" 13/3" 19/3" 1/" 31/3" 4-3/8" 6-1/16" 9-7/16" 11-1/8" 16-3/4" -5/16" 8" Walkway meets OSHA requirements for toeboards on elevated structures. (Edge Margin) ONSTRTION: Plank with large debossed holes and perforated buttons. MATERIAL: Plank: Slip Resistant Surface Easy Installation Variety of Widths/Heights Large Open Area High Load apacity Surface Lessens Worker Fatigue 11 or 13 ga. Galvanized Steel 11 or 13 ga. Plain Steel (special) 16 ga. Stainless Steel 304 (special).15" Aluminum 505-H3 11 ga. Galvanized Steel Walkway: HEIGHTS: Plank: Walkway: WITHS: Plank: 5", 7", 10", 1", 18" (4" & 30" special) Walkway: 4", 30", 36" LENGTHS: 1-1/", " (3" or 4" special) 5" depth Plank: 1' (longer by special order) Walkway: 1' OPEN 38% of surface area AREA: depending on product size Information on 36" walkway is available ask us! PERF-O GRIP Stair Tread Fast, Easy Installation MATERIAL: 11 or 13 ga. Galv. Steel 11 or 13 ga. HRPO Steel HEIGHTS: 1-1/" or " WITHS: 5", 7", 10", 1" LENGTHS: 4", 30", 36" Information on end plate is available. 010 heck out testimonials on website. 1-800-37-380
Flooring Plank Tread Rungs TRATION TREA Flooring - Standard Pattern TRATION TREA Plank Skid resistant buttons 1/8" R See chart below. rain Hole Pattern Special Order 1/8" drain holes every 3rd row, holes and dimples same as standard pattern. Other alternative patterns available. 1-1/" or " (Typ) 90 o (Typ) 13/16" (Typ) A (Spaces @ 5/8" each) end Radius (See Note) Traction Tread Plank WITH A 7" 6-7/8" 15/16" 8 10" 9-7/8" 7/8" 13 1" 11-7/8" 15/16" 16 end Radius: 1/16" - 13 ga. steel 1/8" - 11 ga. steel and.15" aluminum Slip Resistant uttons hoice for Industrial Floors Safe Walking-Working Surface Pedestrian Traffic AA ompliant FLOORING PROT ETAILS TYPE MATERIAL #/SF Traction Tread.156*.375.13 11 ga. HRPO 5.0 Traction Tread.156*.375.176 13 ga. HRPO 3.8 Traction Tread.156*.375.154 16 ga. HRPO.5 Traction Tread.156*.375.19.15 Alum. 1.6 *imension shown represents hole diameter at bottom of material. iameter at top for Traction Tread flooring will be greater. Size on any dimension for any style may vary, minimum of range is shown. All dimensions subject to mill tolerance. TRATION TREA Stair Tread MATERIAL: 11, 13 ga. HRPO Steel 11, 13 ga. Galv. Steel.15" Aluminum505-H3 HEIGHTS: 1-1/" or " LENGTHS: 4", 30", and 36" Product Width Nominal 7" 4" 10" 7" 1" 9" Nominal Height 1-1/" 19/3" 1-3/16" " 7/3" 1-11/16" 1-1/" 19/3" 1-3/16" " 7/3" 1-11/16" 1-1/" 19/3" 1-3/16" " 7/3" 1-11/16" TRATION TREA Ladder Rungs arrier Plate imensions 7/16" x 1-3/4" slot o 7/16" Width EN VIEW 3/4" MATERIAL: Flooring: Plank: 11, 13, 16 ga. HRPO Steel.15" Aluminum 505-H3 16 ga. Stainless Steel 304 (special) 11 or 13 ga. HRPO Steel 11 or 13 ga. Galv. Steel.15" Aluminum 505-H3 Ladder Rungs: 11 or 13 ga. HRPO Steel 11 or 13 ga. Galv. Steel.15" Aluminum 505-H3 16 ga. Stainless Steel 304 (special) See charts HEIGHTS: LENGTHS: Flooring: 10' Plank: 10' or 1' Ladder Rungs: 4' or 5' WITHS: Flooring: 36" Plank & Rungs: See charts GRIP STRT plank and TRATION TREA 4-row Ladder Rungs were used to make this safe, strong truck platform. uttons Help Meet OSHA Standards Ladder Rung - 13 GA. LOA TALE SPAN ROWS WITH HEIGHT #LF '-0" 3'-0" 4'-0" 680 40 30 1-1/4" 1-1/" 1.#lf.10.180.430 3 1-5/8" 1-1/8" 1.3#lf 495 340 50.110.0.510 885 60 450 4-1/4" 1-1/" 1.5#lf.080.160.370 NOTE: Values are based on concentrated load placed at mid-span with a safety factor of.0 Ladder Rung -.15" ALMINM LOA TALE 1-1/4" 1-1/".5#lf 3 1-5/8" 1-1/8".5#lf 4-1/4" 1-1/".7#lf 659 407 310.40.360.870 479 39 4..440 1.03 856 600 436.16.350.750 NOTE: The data for aluminum ladder rung represents estimates. TRATION TREA treads were used to fabricate this stadium stairway. We can track your shipment! 1-800-37-380 010
Formerly known as Mebac Non Sparking Non-orrosive Slip Resistant Low Maintenance High Strength to Weight MATERIAL: Floor Plate: Aluminum oxide grit on steel. Steel base material may be supplied either painted or galvanized. SPEIAL ORER HEIGHTS: Floor Plate: 1/4", 3/8", 1/" WITHS & LENGTHS: Floor Plate: 4' x 10' sheet Precast Nosing: Type -3E - 1/4" x 3" x 0' Type -4E - 1/4" x 4" x 0' More floor plates see p.1, 19 WHAT IS GRIP TIGHT? Aluminum oxide grit is bonded to a metal base using a metal bonding agent. Surface can be specified on either a steel on steel, aluminum on aluminum, aluminum on steel, or aluminum on galvanized steel base. Steel based products are finished with a standard shop coat of paint applied to the underside surface. A galvanized finish can be applied over the entire surface when a steel bonding agent is specified. GRIP TIGHT products come in 4 grades of slip resistant coatings. McNIHOLS offers the most aggressive. All grades/profiles of GRIP TIGHT products exceed the minimum.60.o.f. required by many municipalities. Please visit www.mcnichols.com for more information on our GRIP TIGHT products. ONSTRTION: Extruded plank with punched or solid surface MATERIAL: Aluminum 6061-T6 HEIGHTS: 3/4", 1", 1-1/4", 1-1/", 1-3/4", " WITHS: 6" or 1" LENGTH: 1' iamondback Solid plank shown connected to a punched plank by ovetail interlock joining lengths together to form integral, wider panels. eckplate Plank SPEIAL ORER iamondback eckplate Plank GRIP TIGHT Precast Type -3E Nosing & Tread Nosing GRIP TIGHT Ladder Rung - over or Solid 1/4" thick Aluminum on Aluminum 3" x 0' 4" x 0' available ask for details! 3/16" x 1-1/4" See p. 10 overs Aluminum on galvanized 3/4" or 1" x 10' STOK ars are 3/4" or 1" square Aluminum on Steel SPEIAL ORER 6" x 1' Lightweight End plates available SPEIAL ORER EN VIEW 1.11" iamondback Treadplate Flooring Aluminum-on-Steel GRIP TIGHT Floor Plate Load Per Square Foot in Pounds To determine the maximum deflection for the limited allowable load, divide the deflection coefficient by the plate thickness. EXAMPLE: eflection for a 1/" thick plate, 3'-0" span, at 593 lbs. per sq. foot = 0.149 (deflection coefficient) 0.50" (plate thickness) =.98". Thickness added to base metal 1/16" to 3/16" coating weight.48# per square foot. Theoretical Weight Per Steel Plate Thickness- SF in lbs. Inches 7.7# 3/16 10.# 1/4 15.3# 3/8 0.4# 1/ 5.3# 5/8 30.6# 3/4 35.7# 7/8 40.8# 1 eflection coefficient: E =9,000,000 (Weight of Plate Included) SPAN 1'-0" 1'-6" '-0" '-6" 3'-0" 3'-6" 4'-0" 4'-6" 5'-0" 5'-6" 6'-0" 6'-6" 7'-0" 7'-6" 8'-0" 750 333 188 10 83 61 47 1333 593 333 13 148 109 83 66 53 3000 1333 750 480 333 45 188 148 10 99 83 71 61 5333 370 1333 853 593 435 333 63 13 176 148 16 109 95 83 8333 3703 084 1333 96 680 51 41 333 75 3 197 170 148 130 1000 5333 3000 190 1333 980 750 593 480 397 333 84 45 13 188 16330 758 4088 613 1815 1333 10 807 653 540 454 387 333 90 55 1333 9481 5333 3413 370 1741 1333 1053 853 705 593 505 35 379 333.017.037.066.104.149.03.65.335.414.501.596.700.810.931 1.058 Section Modulus Per Ft. of Width.070.15.81.500.781 1.15 1.531.000.36" New! EZ Grip Texture Surface EN VIEW SPEIAL ORER ONSTRTION: Interlocking Panels HEIGHT:.36" LENGTH: 1' Edgeband available 1" Edgeband "A" "" Treadplate #LF Solid 1.97 Punched 1.59 Edgeband A.16 Edgeband.19 iamondback Ladder Rungs Low Maintenance Quick rainage Non-orrosive ONSTRTION: 1" x 1" interlocking flexible tiles with 5/16" open grid pattern of 16 uniform squares MATERIAL: Polypropylene and rubber HEIGHT: 5/8" thick OLORS: lack, yellow, or gray - stock WEIGHT:.70 lb. each OPTIONAL: Edge borders, corners and marking buttons Supports Linings Retards orrosion Lengthens Lining Life MATERIAL: Plain Steel Tight clinch style furnished unless otherwise specified. 1 ga. (Heavy uty Applications) 14 ga. (Medium uty Applications) (stock) Stainless Steel 1 gauge (Heavy uty/high Temperatures) 14 gauge (Medium uty/high Temperatures) (where 410SS is specified, low carbon.08 max will be supplied) STANAR TYPE EPTH: 3/4" STOK 1" or 1-1/4" (special order) SIZE: 3' x 10' OPEN AREA: 1 gauge - 81% 14 gauge - 87% WEIGHT: 1 gauge: 3/4" = 3.3# 1" = 5.1# 14 gauge: 3/4" =.78# 1" = 4.0# Rungs can be provided with (as shown here) radius ends on a special order basis. Supports a 450# load with a safety factor of 4. When ordering cut-to-size consider symmetry of pattern. ONSTRTION: Solid or Punched, radius or square end cut HEIGHT/WITH: 1.39" x 1.75" LENGTH: 1' or cut-to-size THIKNESS: 1.09" WEIGHT: Solid -.78#/LF Punched -.74#/LF FINISH: Mill - Standard Anodized or Polished Available 010 hoose from our vast inventory! 1-800-37-380
New solid deck available please inquire. Easy Install Slip Resistant Interlock or Plank Styles Self leaning orrosion Resistant Smooth Surface Style Female/Male FM Traction Grip Surface Style Male/Male MM Interlocking feature Hold own lamp J olt Filler Plank GRATE-LOK planks with Traction Grip surface were used to make this rooftop walkway safe for workers. MATERIAL: Plain Steel 18 or 14 ga. mill galvanized Loading before fabrication information Plain Steel 16 ga. mill available galvanized before fabrication by special order HEIGHTS: 1-1/", -1/", 3" or 4" WITHS: 6", 9", or 1" (3" solid filler plank available, FM interlock only) LENGTHS: 1' 0' or 4' (-1/", 3" or 4" heights only) Special lengths to order SRFAE: Traction grip MG Smooth MS View treads on p.10 GRATE-LOK Grating Plank - Product etail PLANK 1-1/" HEIGHT -1/" HEIGHT 3" HEIGHT 4" HEIGHT Gauge Width % Open atalog No. #/LF atalog No. #/LF atalog No. #/LF atalog No. #/LF 1" 45% MG-11518.9 MG-1518 3.7 MG-13018 3.9 MG-14018 4. 1" 45% MS-11518.9 18 9" 43% MG-91518.3 MG-9518 3. MG-93018 3.3 MG-94018 3.7 18 9" 43% MS-9518 3. 6" 39% MG-61518 1.9 MG-6518.6 MG-63018.8 MG-64018 3. 1" 43% MG-11516 3.5 MG-1516 4.6 16 9" 41% MG-91516.9 MG-9516 3.9 6" 37% MG-61516.3 MG-6516 3. 1" 40% MG-11514 4. MG-1514 5.6 MG-13014 5.9 MG-14014 6.5 1" 40% MS-13014 5.9 14 9" 38% MG-91514 3.5 MG-9514 4.8 MG-93014 5.1 MG-94014 5.6 6" 35% MG-61514.7 MG-6514 4.0 MG-63014 4.3 MG-64014 4.8 18 3" Solid MG-3518 1.9 MG-33018.1 MG-34018.4 16 3" Solid MG-3516.3 MG-33016.5 MG-34016.9 14 3" Solid MG-3514.8 MG-33014 3.1 MG-34014 3.5 11/16" TOP VIEW.750" Typ. 11/16".750" 1.500" Stock items shown may have FF - Female/Female, FM - Female/Male, or MM - Male/Male flange option, please inquire. STOK EN VIEWS MM Male/Male 1-1/" Height Also available as FM & FF Leg configuration differs from -1/", 3" or 4" Heights MM Male/Male -1/", 3" or 4" Heights FM Female/Male FF Female/Female GRATE-LOK planks are used for safe walkways on this communication tower. Panel edge 3" SIE VIEW 6" 6" 3" ownload all our cats! 1-800-37-380 010 Panel edge TOP VIEW ETAIL Width A 6" 5.9375" 4.56" 3.81" 9" 8.9375" 7.56" 6.81" 1" 11.9375" 10.56" 9.81" Tolerances + / - 1/16"
HOW TO ORER/SPEIFY Simply call 1-800-37-380, and we will be ready to help you with your order. We can process your inquiry or order more quickly, if you have the following information ready when you call. ONSIER: 1. Application or use of product. Physical requirements A. loading. open area. slip resistance PLEASE SPEIFY: 3. McNIHOLS GRIP STRT Safety Grating 4. Quantity: number of pieces or planks required 5. Material: Pre-Galvanized Steel 14 or 1 gauge Plain Steel 14 or 1 ga. Aluminum 505.080" thick (1 ga.) or.100" (10 ga.) Stainless Steel-Type 304 16 ga. Stainless Steel-Type 316L 16 ga. (special) 6. Width: Ladder Rung* -1/" 1-iamond* * Also available as reverse diamond by special order. Plank 4-3/4" -iamond 7" 3-iamond 9-1/" 4-iamond 11-3/4" 5-iamond 18-3/4" 8-iamond 4" 10-iamond Walkway 4" 10-iamond 7. Height: Ladder Rung 1-1/8" Plank 1-1/", ", -1/" or 3" Walkway 4-1/" depth (all heights are not available for all gauges/widthsplease inquire) 8. Length: 10' or 1' or cut to size (special lengths to order up to 4' maximum) 9. Surface: Serrated standard, non-serrated special 10. Special requirements or fabrication (i.e., flat stock, forming, reconditioned material, etc.), 11. Specify any required accessories such as clamps, splice plates, etc. 1. atalog number - generally 5-6 digits, may have a prefix or suffix 1st numeral denotes number of diamonds to width or plank 3= 3-diamond (301) 5= 5-diamond (501) 10 = 10-diamond (10451 in this case the first numerals) nd & 3rd numeral denote heightplank or depth-walkway 0 = " height and so on 15 = 1-1/" height 45 = 4-1/" depth (walkway only) 4th and 5th numeral denote gauge 16 = stainless steel 14 = gauge steel galv or plain Prefix: T = Stair Tread H = Heavy uty Suffix: N = Tread with Abrasive Nosing = lack (plain steel) A = Aluminum S = Stainless Steel Type 304 SL = Stainless Steel Type 316L = Walkway 1 = galvanized steel or plain steel or.080" thick aluminum 10 = aluminum.100" thick (10 ga.) Example: 301 = 3-iamond Plank " height 1 ga. galvanized steel TO PLAE AN ORER ALL: 1-800-37-380 FAX: Inside front cover for nearest service center. GRIP STRT Standard Tread For the safest walking/working surfaces! More information on GRIP STRT treads p.16 3 diamond Plank Walkway Treads Rungs GRIP STRT Plank Non-serrated surface SPEIAL ORER 5 diamond 4' length available please inquire! STOK LIST ATALOG NO. IAMON WITH HEIGHT PRE-GALVANIZE -14 GA.-SERRATE 11014 Rung* 1-1/" 1-1/8" 1514* 4-3/4" 1-1/" 014* 4-3/4" " 31514* 3 7" 1-1/" 3014* 3 7" " 41514* 4 *Also available 9-1/" 1-1/" 4014 4 in arbon 9-1/" " 51514* 5 Steel-add 11-3/4" 1-1/" to catalog 5014* 5 11-3/4" " number 5514* 5 when ordering. 11-3/4" -1/" 81514* 8 18-3/4" 1-1/" 8014* 8 18-3/4" " 10014* 10 4" " 104514- Walkway 10 4" 4-1/" PRE-GALVANIZE -1 GA.-SERRATE 151* 4-3/4" 1-1/" 01 4-3/4" " 3151* 3 7" 1-1/" 301* 3 7" " 4151* 4 9-1/" 1-1/" 401* 4 9-1/" " 451* 4 9-1/" -1" 4301* 4 SAME 9-1/" 3" 5151* 5 AY 11-3/4" 1-1/" 501* 5 STOK 11-3/4" " 551* 5 SHIPMENT 11-3/4" -1/" 5301* 5 11-3/4" 3" 8151* 8 18-3/4" 1-1/" 801* 8 18-3/4" " 851 8 18-3/4" -1/" 8301 8 18-3/4" 3" 1001* 10 4" " 10301 10 4" 3" 10451- Walkway 10 4" 4-1/" ALMINM.080" GA.- TYPE 505 SERRATE 01-A** 4-3/4" " 301-A** 3 **Also available in.100" 7" " 4151-A 4 thickness 9-1/" 1-1/" 401-A** 4 Aluminumchange 9-1/" " 451-A** 4 last 9-1/" -1/" digits in catalog number to 5151-A 5 11-3/4" 1-1/" 501-A** 5 10A when 11-3/4" " 8151-A 8 ordering. 18-3/4" 1-1/" 801-A 8 18-3/4" " STAINLESS -16 GA.-TYPE 304-SERRATE 4016-S 4 9-1/" " 5016-S 5 11-3/4" MATERIAL: 1 or 14 ga. Plain Steel mill galvanized Aluminum.080" or.100" ga. 505-H3 Plain Steel 1 or 14 ga. Stainless Steel 16 ga. Type 304 (Type 316L by special order) HEIGHTS: Plank 1-1/", ", -1/" or 3" Walkway 4-1/" depth WITHS: Plank 4-3/4", 7", 9-1/", 11-3/4", 18-3/4" or 4" Walkway: 4" LENGTHS: 10', 1' or cut-to-size or special lengths 5/16" Height ± 1/16" 1-1/8" 9/16" 7/8" ± 1/8" 90 ± -1/ Plank End View Plank Top View 11/16" 1-7/8" 1-7/8" 7/16" 7/16" Plank Width GRIP STRT Walkway 1" 4-1/" depth ± 1/16" 5/16" Safer Serrated Surface Maintenance-Free Open esign High Load apacity Walkway End View 90 ± -1/ Long Life Fast, Economical Installation Versatile in Application Walkway Width 1-7/8" 5/8" 11/16" 10 diamond 5/8" 010 e safe with GRIP STRT. 1-800-37-380
GRIP STRT Stair Treads 3 diamond 4 diamond Standard 1-3/4" x 7/16" slot 5/16" 7/16"O hole A Abrasive Nosing GRIP STRT Stair Treads Product ata Steel, Aluminum and Stainless Steel STANAR WITH ARASIVE NOSING A A 4-3/4" (-ia.) 1-1/" " 3/4" 1" -5/8" -5/8" 7" 1-1/" 3/4" 3-3/8" 8-1/8" 1-1/" 3/4" 4-1/" (3-ia.) " 1" 3-3/8" (3-ia.) " 1" 4-1/" 9-1/" 1-1/" 3/4" 5-7/8" 10-1" 1-1/" 3/4" 6-7/8" (4-ia.) " 1" 5-7/8" (4-ia.) " 1" 6-7/8" 11-3/4" 1-1/" 3/4" 8-1/8" (5-ia.) " 1" 8-1/8" Stainless Steel not available in -iamond and 3-iamond widths. A,,, dimensions have a tolerance of +/- 1/16" Standard Sizes and Recommended Spans Span Height Standard With Abrasive Nosing -14 Ga. atalog # Size atalog # Size p 1-1/" T-1514 -ia. - 4-3/4" to T-31514 3-ia. - 7" T-31514-N 8-1/8" 48" T-41514 4-ia. - 9-1/" T-41514-N 10-1/" T-51514 5-ia. - 11-3/4" p " T-014 -ia. - 4-3/4" to T-3014 3-ia. - 7" T-3014-N 8-1/8" 48" T-4014 4-ia. - 9-1/" T-4014-N 10-1/" T-5014 5-ia. - 11-3/4" ALMINM -.080" p " T-301-A 3-ia. - 7" T-301-A-N 8-1/8" to T-401-A 4-ia. - 9-1/" T-401-A-N 10-1/" 36" T-501-A 5-ia. - 11-3/4" STAINLESS - Type 304-16 Gauge p to " T-4016-S 4-ia. - 9-1/" 36" T-5016-S 5-ia. - 11-3/4" Recommendations are based on approx. min. loads of 300 lb. concentrated; 100 lb. uniform. Specific performance criteria may vary by municipality/building code body and should be locally checked prior to finalizing specifications. GRIP STRT Stair Treads Load Table Load data below takes eccentric loads into consideration. Although load values include allowances for normal impact conditions and usual pedestrian traffic, be sure to make provisions in the structural design for special uses and loads involving unusual impact forces or vibratory forces. Load-carrying capacity of stair treads increases as side channel height and gauge of material increases. -iamond 3-iamond 4-iamond 5-iamond Steel Gauge 14 14 14 14 Span Ht. '0" 1-1/" 1191 47 761 443 549 435 434 45 " 1978 783 16 737 911 604 71 573 '6" 1-1/" 764 378 645 470 481 476 369 45 " 168 611 810 590 584 578 463 566 3'0" 1-1/" 53 315 340 300 45 300 194 300 " 88 54 563 49 407 483 3 473 4'0" " 498 394 318 37 30 364 18 356 IA. 3 IA. 4 IA. 4 IA. 5 IA. 5 IA. Material Alum. Alum. Alum. Stainless Alum. Stainless Gauge.080".080".080" 304.080" 304 Span Ht. 'O" " 138 56 86 503 607 481 610 483 396 388 394 386 '6" " 850 40 551 40 388 39 390 387 53 388 5 381 3'0" " 590 350 383 335 70 37 71 33 176 31 175 319 4'0" " 33 63 15 5 15 45 15 44 99 41 98 41 Intermediate stringer is recommended for spans over 4' 7/3" GRIP STRT -IAMON PLANK (4-3/4" WITH) LOA TALE Material 14 ga. 1 ga. ALM. ALLOY 505 1 ga..080" 14 ga. 1 ga. ALM. ALLOY 505 1 ga..080" Height in. (mm) 1-1/ -1/ 1-1/ -1/ 1-1/ -1/* 1-1/ -1/ 1-1/ -1/ 3 (76.) 1-1/* -1/* #/LF (Kg/m).3 (3.4).6 (3.87).8 (4.17) 3. (4.76) 3.6 (5.36) 4.0 (5.95).85 (1.6).9 (1.37) 1.00 (1.48) 3.0 (4.46) 3. (4.76) 3.5 (5.1) 4.1 (6.10) 4.5 (6.70) 4.9 (7.9) 5. (7.74) 1.06 (1.58) 1.15 (1.71) 1.4 (1.85) atalog lear Span Number '-0" '-6" 3'-0" 3'-6" 4'-0" 4'-6" 5'-0" 5'-6" 6'-0" 6'-6" 7'-0" 7'-6" 8'-0" 9'-0" 10'-0" 11'-0" 1-0" 134 849 591 435 334 65 15 179 151 1514.06 54.10 40.14 351.0 301.6 65.3 36.40 13.49 195.58 179 How to read p.17.05.08.11.16.0.6.3.39.47 198 1409 980 71 553 438 356 95 48 1 184 161 14 113 93 014.06.09.13.17.3.9.35.43.51.60.70.81.9 1.18 1.47 870 697 58 499 438 390 35 31 95 73 55 39 5 01 183.04.07.10.14.18.3.8.34.41.48.56.65.74.94 1.18 5 1616 114 87 634 50 408 338 85 44 11 184 163 139 106 88 75 514.04.06.08.11.14.18.3.7.33.38.45.51.59.75.94 1.14 1.38 998 800 667 573 50 447 404 368 338 313 9 73 57 31 10 193 178.03.04.06.09.11.15.18..6.31.36.41.47.60.75.9 1.10 1751 113 78 576 443 351 86 37 00 17 149 131 116 151.07.11.15.1.7.35.43.5.6.74.86.99 1.14 693 556 464 399 350 313 83 58 38 1 06 194 183.05.08.1.17..8.34.4.50.59.69.79.91 79 1790 145 917 703 557 453 375 317 71 35 05 181 145 119 99 85 01.05.08.11.16.0.6.3.39.46.55.63.73.84 1.07 1.34 1.64 1.98 1105 886 739 635 557 496 448 409 376 348 35 305 87 58 35 16 01.04.06.09.1.16.1.6.31.37.44.51.59.67.86 1.07 1.31 1.58 4179 676 1860 1368 1049 830 673 557 469 400 346 30 66 11 17 143 11 51.04.06.09.13.17.1.6.3.38.44.51.59.67.86 1.07 1.30 1.55 1654 134 1104 948 830 739 666 606 557 515 479 448 41 376 341 31 88.03.05.07.10.13.17.1.5.30.35.41.47.54.69.85 1.04 1.4 998 639 443 36 48 196 159 131 110 94 51-A.10.15..31.40.51.63.76.90 1.08 395 316 63 6 197 175 157 143 131 11.08.1.18.5.3.41.50.61.73.85 1463 937 650 478 366 89 34 194 16 138 119 01-A.08.13.18.5.33.4.5.63.74.87 1.0 579 463 386 331 90 57 3 11 19 177 165.06.10.15.0.7.34.4.51.59.69.80 199 1407 977 718 550 434 35 91 44 08 179 156 137 51-A.07.10.15.1.8.35.43.53.63.74.85.98 1.1 870 696 580 497 435 387 348 316 90 68 49 3 18.05.08.1.17..8.35.4.50.59.68.78.89 Load Table Symbols: -uniform load (lbs./sf) -concentrated load (lb.) -deflection (inches) GRIP STRT 3-IAMON PLANK (7" WITH) LOA TALE 899 577 40 69 7 180 147 1 103 31514.06.10.14.0.6.33.40.49.59 54 41 351 30 65 37 14 196 180.05.08.11.16.1.6.3.39.47 149 957 665 490 376 98 4 01 169 145 15 110 97 77 63 3014.06.09.13.17.3.9.35.43.51.61.71.81.93 1.19 1.49 871 697 58 500 439 391 353 3 96 75 56 40 6 03 185.04.07.10.14.18.3.8.34.41.48.56.65.74.95 1.19 171 1097 763 56 431 34 77 30 194 166 144 16 111 89 73 61 5 3514.04.06.08.11.14.18.3.7.33.39.45.5.59.76.94 1.16 1.40 999 800 668 574 503 448 405 369 340 315 93 75 59 33 1 195 181.03.04.06.09.11.15.18..6.31.36.41.47.61.76.93 1.1 1189 763 53 39 301 39 195 16 137 118 10 90 79 3151.07.11.15.1.7.35.43.5.63.74.87 1.00 1.15 694 556 465 400 35 314 84 60 40 3 08 196 185.05.08.1.17..8.34.4.50.59.69.80.9 1896 116 846 63 478 379 308 56 16 185 160 140 14 99 8 68 58 301.05.08.11.16.0.6.3.39.47.55.64.74.85 1.08 1.36 1.67.01 1106 886 740 636 558 498 450 410 378 350 37 307 89 60 38 19 03.04.06.09.1.16.1.6.31.37.44.51.59.68.87 1.09 1.33 1.61 836 1817 163 99 71 564 457 379 319 7 35 06 181 144 118 98 83 351.04.06.09.13.17.1.6.3.38.44.5.59.68.86 1.07 1.31 1.57 1654 135 1105 948 831 740 667 608 558 516 481 450 43 378 343 314 90.03.05.07.10.13.17.1.5.30.35.41.47.54.69.86 1.05 1.5 3587 98 1597 1174 900 71 578 478 403 344 97 59 8 181 148 13 104 3301.04.06.08.11.14.18..7.3.38.44.51.58.74.9 1.1 1.34 1868 1675 1397 1199 1050 935 843 767 705 65 606 567 533 476 431 395 364.03.04.06.09.11.14.18..6.30.35.41.46.59.73.83 1.07 667 443 301 1 168 133 108 3151-A.10.15..31.40.51.63 395 316 63 6 197 175 157.08.1.18.5.3.41.50 993 636 441 34 48 196 159 131 110 93 80 301-A.08.13.18.5.33.4.5.63.74.86 1.00 579 463 386 331 90 57 3 11 19 177 165.06.10.15.0.7.34.4.51.59.69.80 149 955 663 487 373 95 39 197 166 141 1 106 93 351-A.07.10.15.1.8.35.43.53.63.74.85.98 1.1 81 696 580 497 435 387 348 316 90 68 49 3 18.05.08.1.17..8.35.4.50.59.68.78.89 GRIP STRT plank was used for stair treads on this equipment. GRIP STRT plank grating was used as a protective platform over equipment. Fabrication Services Available. 1-800-37-380 010 hart Notes: 1) Spans in shaded area produce deflection of 1/4" or less under uniform load of 100 lbs./sf ) *Indicates items available by special order only
GRIP STRT 4-IAMON PLANK (9-1/" WITH) LOA TALE Material 14 ga.. 1 ga ALM. ALLOY 505 1 ga..080" STAIN- LESS. 304 16 ga 14 ga. 1 ga. ALM. ALLOY 505 1 ga..080" STAIN- LESS 304 16 ga. Height in. (mm) 1-1/ -1/* 1-1/ -1/ 3 (76.) 1-1/* -1/* 3* (76.) 1-1/ -1/ 1-1/ -1/ 3 (76.) 1-1/* -1/* 3* (76.) #/LF (Kg/m) 3.6 (5.36) 3.8 (5.65) 4.1 (6.10) 5.0 (7.44) 5.4 (8.04) 5.7 (8.48) 6.1 (9.08) 1.8 (1.90) 1.37 (.03) 1.46 (.17) 1.55 (.30) 3. (4.76) 4. (6.5) 4.4 (6.55) 4.7 (6.99) 5.9 (8.78) 6. (0.3) 6.6 (9.8) 7.0 (10.4) 1.49 (.) 1.59 (.36) 1.67 (.48) 1.75 (.60) 3.7 (5.51) atalog lear Span Number '-0" '-6" 3'-0" 3'-6" 4'-0" 4'-6" 5'-0" 5'-6" 6'-0" 6'-6" 7'-0" 7'-6" 8'-0" 9'-0" 10'-0" 11'-0" 1' 663 46 96 19 168 134 109 90 77 41514.06.10.14.0.6.33.41.50.59 55 41 35 303 66 38 15 197 18.05.08.11.16.1.6.33.40.47 1100 705 491 36 78 0 179 148 15 107 93 81 7 58 47 4014.06.09.13.17.3.9.36.43.5.61.71.8.94 1.0 1.51 730 698 583 501 440 39 354 33 98 76 58 4 8 05 187.04.07.10.14.18.3.8.35.41.49.57.66.75.96 1.0 16 809 563 415 318 5 05 170 144 13 106 93 8 66 54 45 4514.04.06.08.11.14.18.3.8.33.39.45.5.60.76.95 1.17 730 730 669 574 504 449 406 370 341 316 95 77 61 35 14 197.0.04.06.09.1.15.18..6.31.36.4.48.61.76.94 906 581 405 98 9 18 148 13 104 89 77 67 60 4151.07.11.16.1.8.36.44.54.64.76.89 1.0 1.17 718 575 481 413 363 34 9 67 46 8 13 00 189.06.09.13.17.3.9.35.43.5.61.71.8.94 1398 896 64 460 353 80 8 189 160 137 119 104 9 74 61 51 43 401.05.08.11.16.0.6.3.39.47.55.65.75.85 1.10 1.38 1.69.03 1107 887 741 637 559 499 451 41 380 353 39 309 9 64 41 06.04.06.09.1.16.1.6.31.37.44.5.60.68.88 1.10 1.35 1.63 090 1339 931 685 55 416 338 80 36 01 174 15 134 107 87 73 6 451.04.06.09.13.17.1.6.3.38.44.5.60.68.87 1.07 1.3 1.58 1400 135 1106 949 83 741 668 609 559 518 48 45 45 380 345 316 93.03.05.07.10.13.17.1.5.30.35.41.48.54.69.85 1.05 1.7 644 1694 1177 866 664 55 46 353 97 54 19 19 169 134 110 91 77 4301.04.06.08.11.14.18..7.3.38.44.51.58.74.9 1.1 1.35 1400 1400 1398 100 1105 936 844 769 706 653 608 569 535 478 434 397 367.0.04.06.09.11.15.18..6.31.35.41.47.59.74.90 1.08 499 319 163 14 98 4151-A.10.15..31.40.51 395 316 63 6 197 175.08.1.18.5.3.41 73 468 35 39 183 145 117 97 81 69 401-A.08.13.18.5.33.4.5.63.74.87 568 463 386 331 90 57 3 11 19 177.06.10.15.0.7.34.4.51.59.69 1099 704 489 359 75 17 176 145 1 104 90 78 69 451-A.07.10.15.1.8.35.43.53.63.74.85.98 1.1 568 568 568 497 435 387 348 316 90 68 49 3 18.03.07.1.17..8.35.4.50.59.68.78.89 1350 864 600 441 338 67 16 179 150 18 110 96 84 4301-A.06.09.14.19.5.31.39.47.56.66.77.88 1.00 568 568 568 568 535 475 48 389 356 39 305 85 67.0.05.09.14.0.5.31.38.45.53.61.70.80 70 46 3 38 183 145 118 98 83 71 59 4016-S.05.08.11.16.0.6.3.39.47.55.61 570 457 38 39 89 58 34 14 197 184 165.04.06.09.1.16.1.6.31.38.44.49 536 344 40 177 136 108 88 74 6.06.10.14.0.6.33.41.50.60 51514 55 4 353 304 67 39 16 198 183.05.08.1.16.1.6.33.40.48 890 571 397 93 5 178 145 10 10 87 76 66 59 47 5014.06.09.13.17.3.9.36.43.5.61.71.83.95 1.1 707 699 584 50 440 393 355 34 99 77 59 43 30 07.04.07.10.14.18.3.9.35.4.49.57.66.76.97 101 655 456 336 58 04 166 138 116 100 86 76 67 54 44 5514.04.06.08.11.14.18.3.8.33.39.45.5.60.77.96 707 707 669 575 505 450 407 371 34 317 96 78 6 36 16.0.04.06.09.1.15.18..6.31.36.4.48.6.77 710 456 318 35 181 144 117 98 83 71 6 55 49 5151.07.11.15.1.8.35.44.53.64.76.89 1.03 1.18 695 558 467 40 354 317 87 63 44 7 13 01 190.05.08.1.17..8.35.43.51.60.71.8.95 1131 75 505 37 86 7 185 154 130 111 97 85 75 60 50 4 501.05.08.11.16.0.6.3.39.47.56.65.75.86 1.11 1.39 1.70 1107 888 74 638 561 501 453 414 38 355 33 31 95 66 43 4.04.06.09.1.16.1.6.31.38.44.5.60.69.89 1.11 1.36 1691 1083 753 554 45 337 73 6 151 141 13 109 87 71 59 59 50 551.04.06.09.13.17.1.6.3.38.45.5.60.68.87 1.09 1.33 1.60 1115 1115 1106 950 833 74 669 610 561 519 484 453 46 38 347 319 95.0.04.07.10.13.17.1.5.30.36.41.48.55.70.87 1.06 1.8 138 1370 95 701 537 45 345 86 41 06 178 155 137 109 89 74 63 5031.04.06.08.11.14.18..7.3.38.44.51.58.74.93 1.13 1.36 1115 1115 1115 1115 105 937 845 770 707 654 609 570 537 480 436 399 369.0.03.05.08.11.15.18..6.31.36.41.47.60.74.90 1.09 403 55 179 13 100 5151-A.10.15..31.40 395 316 63 6 197.08.1.18.5.3 59 379 63 193 148 117 95 78.08.13.18.5.33.4.5.63 501-A 466 466 386 331 90 57 3 11.05.10.15.0.7.34.4.51 hart Notes: 889 569 395 90 176 14 118 99 84 73 63 1) Spans in shaded area 551-A.07.10.15.1.8.35.43.53.63.74.85.98 produce deflection of 1/4" or less under uniform load of 100 lbs./ft 466 466 466 466 435 387 348 316 90 68 49 3.0.05.10.16..8.35.4.50.59.68.78 ) *indicates items available 951 699 485 357 73 16 175 144 11 103 89 78 68 by special order 5301-A.05.09.14.19.5.31.39.47.56.66.77.88 1.00 466 466 466 466 466 466 48 389 356 39 305 85 67.0.04.07.11.17.4.31.38.45.53.61.70.80 583 374 61 19 148 118 96 80 68 58 48 5016-S.05.08.11.16.0.6.3.39.47.56.61 464 458 33 330 90 59 35 15 199 185 165.03.06.09.1.16.1.6.3.38.45.49 hart Notes: 1) Spans in shaded area produce deflection of 1/4" or less under uniform load of 100 lbs./ft ) *indicates items available by special order Loading available for.100" gauge and Stainless 316L please inquire. GRIP STRT 5-IAMON PLANK (11-3/4" WITH) LOA TALE More information about GRIP STRT Products and our many other Safety Gratings is available on our website, www.mcnichols.com! Load Table Symbols: -uniform load (lbs./ft. ) -concentrated load (lb.) -deflection (inches) Loading available for.100" gauge and Stainless 316L please inquire. Fig.1 deflection () Fig. Fig.3 deflection () Load Table Explanation LOA LOA LOA s deflection ( s ) The following information refers to Regular GRIP STRT Safety Grating hereinafter referred to as grating. HOW TO REA LOA TALES To select size of grating, determine load, clear span and deflection requirements. Having this information, select from the appropriate load tables to find the appropriate plank to meet job requirements. FOR EXAMPLE: If you require a clear span of 4'0", concentrated load of 300# at.05" maximum deflection and have chosen regular GRIP STRT, you would verify the following: 8-iamond GRIP STRT 18-3/4" wide, -1/" height, 1 gauge steel will carry a load of 416# at a 0.18" deflection. This is one size to do the job. Other sizes will carry more load if necessary. For more economical selection, choose the greatest width that will support the load consistent with the job requirements and choose deeper channels rather than heavier steel gauges. Grating will generally carry similar concentrated loads, tabulated in pounds at mid-span, for a given span, material gauge and height, regardless of width. The uniform load tables are tabulated in lb./sq. ft., which accounts for the difference in load capacity shown for various widths. eflection is in inches. To ensure the safety of the tabulated loads, two aspects of grating strength must be considered. The first consideration is transverse bending in the grating surface, which is referred to as strut flexure. This occurs when the grating is loaded with either a uniform load or a mid-width concentrated load, and the struts (grating surface) deflect relative to the side channels. To determine the allowable strut loads, samples of each plank material and thickness were tested for each plank width. (see Fig. 3). The data resulting from these tests was used to prepare strut loading tables for regular GRIP STRT which give allowable loads and deflections considering strut flexure only. These allowable strut and rung loads have been incorporated in the Product Selection esign Tables. The second aspect of the grating strength is channel flexure. This occurs when the channels at midspan of the grating deflect relative to support points. To verify the performance of the side channels, samples were loaded with concentrated and uniform loads at different spans. To approximate the most severe condition, there were no attachments between the channels and the supports. In cases where spans are shorter, channels deeper and grating wider, strut flexure becomes more critical. With the exception of 8- and 10- iamond regular GRIP STRT, it can be assumed that both side channels effectively support the concentrated load, and the grating surface deflection is negligible. ased upon these assumptions, the following values found in the load table have been determined: If grating surface deflection should be considered when selecting a product to meet a particular specification, then the deflection of the mid-width of the grating, relative to the side channels, can be calculated using both the data in the Strut Loading Tables and the Load/eflection onversion formula. All load tables show maximum loads, based upon actual load tests. NIFORM LOA () application to all grating: Maximum load(lb/ft ) permitted by flexural stress in side rail or grating strut, whichever is lower, applied to entire grating area (fullwidth by clear-span) between supports. ONENTRATE LOA () application to all walkways/planks: Maximum load(lb) permitted by flexural stress in side rail or grating strut, whichever is lower, applied transversely to total width of grating at mid-span and assumed to be carried equally by both side rails. ONENTRATE LOA ( S ) application to grating surface struts of all walkways/planks: Maximum load (lb/ft) permitted by flexural stress in grating strut, applied longitudinally to a 1-ft. length of grating at midwidth. EFLETION () in all walkways/planks: eflection (in) corre- walkways/planks: eflection (in) STRT EFLETION ( S ) in all sponding to maximum load () or corresponding to maximum concentrated strut load (s), permitted () permitted by flexural stress in side rail or grating strut, whichever by flexural stress in grating surface is lower, applied as defined in strut, applied longitudinally to a Figs. 1 or, and 3. 1-ft. length of grating at midwidth. 010 We sell all grating in all material types! 1-800-37-380
GRIP STRT 8-IAMON PLANK (18-3/4" WITH) LOA TALE Height #/LF Material in.(mm) (Kg/m) 1-1/ 6.1 (9.1) 6.3 14 ga. (9.4) -1/ 6.6 (9.8) 81514 8014 8514 1-1/ 8.5 8151 (1.6) 8.9 801 (13.) 1 ga. ALM. ALLOY 505 1 ga..080" 14 ga. 1 ga. -1/ 9. 851 (13.7) 3 9.6 8301 (76.) (14.3) lear Span '-0" '-6" 3'-0" 3'-6" 4'-0" 4'-6" 5'-0" 5'-6" 6'-0" 6'-6" 7'-0" 7'-6" 8'-0" 9'-0" 10'-0"11'-0" 1'-0" 337 17 151 11 86 69 56 47.33.7.6.9.33.38.45.55 63 11 178 153 135 11 110 101.16.15.15.16.17.19..5 540 358 50 184 14 113 9 76 65 55 48 4.48.37.34.3.34.38.43.50.58.66.77.87 437 349 9 51 0 198 179 164 15 141 13 14.4.1.0.19.0.1.3.6.9.3.36.40 540 411 86 11 16 19 105 87 74 63 55 48 43.46.39.35.8.7.8.31.35.39.44.50.57.64 450 40 335 87 5 5 05 188 173 161 151 14 134.4..0.19.19.19.0.1.3.4.7.9.3 446 87 01 148 115 91 75 63 53 46 40.7...6.3.39.47.56.67.80.9 359 80 35 03 179 161 146 135 15 117 110.1.1.1.14.16.19..6.30.35.40 710 456 318 35 181 144 117 98 83 71 6 54 48.31.5.3.5.8.31.37.44.51.60.68.79.90 554 444 371 319 8 53 9 10 194 181 169 160 151.17.15.14.15.16.17.19..5.8.3.36.40 810 680 473 348 67 1 17 143 10 103 89 78 69 55 45.33.31.7.6.7.9.3.37.4.49.55.63.7.90 1.1 800 663 553 475 416 371 334 307 8 6 44 9 16 194 177.3.0.18.18.18.18.19.1.3.5.8.31.34.41.50 810 810 598 440 337 67 17 180 15 130 11 98 87 69 57 47 40.3.35.30.7.6.8.31.34.39.43.49.56.6.78.96 1.17 1.40 800 800 699 600 56 468 4 385 353 37 307 88 71 43 1 03 189..3..0.0.0.0.1..4.6.8.31.37.44.5.61 53 16 11 83 1-1/*.11 8151-A.49.40.39.44 (3.13) 198 158 13 113.4...4 308 37 165 11 93 73 59 49 *.0 801-A.54.50.44.44.47.53.61.71 (3.7) 90 3 193 166 145 19 116 106.3.8.7.7.8.30.3.36 308 308 48 18 139 110 89 74 6 53-1/*.9 851-A.51.57.54.49.50.5.57.65.73.83 (3.40) 350 348 90 49 18 194 174 158 145 134.37.39.35.33.33.34.35.37.40.43 308 308 308 3 171 135 109 90 76 65 56 49 3*.39 8301-A.50.54.6.54.5.5.56.61.68.76.86.96 (76.) (3.55) 350 350 350 306 68 38 14 195 178 165 153 143.37.38.41.38.37.37.37.39.40.43.46.50 300 300 8 168 18 10 8 68 57 49 4 7.4 10014.46.48.4.38.38.41.44.49.55.6.70 (11.0) 400 400 343 94 57 9 06 187 17 158 147.34.35.3.30.9.9.30.31.33.35.37 300 300 300 64 0 160 130 107 90 77 66 58 51 40 3 7.9 103014.4.43.46.44.39.36.35.36.39.44.45.49.54.65 (76.) (11.8) 400 400 400 400 400 360 34 95 70 49 3 16 03 180.33.33.34.35.37.35.33.33.3.3.33.34.35.38 475 416 89 1 16 18 104 86 7 6 53 46 10.4 1001.40.39.33.31.31.34.38.44.48.56.63.71 (15.5) 650 50 434 37 35 89 60 37 17 00 186 174.6..19.0.0.1..3.5.8.31.34 475 475 475 39 300 37 19 159 133 114 98 85 75 59 48 3 11.1 (76.) (16.5) atalog Number hart Notes: 1) Spans in shaded area produce deflection of 1/4" or less under uniform load of 100 lbs.ft ) * indicates items available by special order Load Table Symbols: -uniform load (lbs./ft. ) -concentrated load (lb.) -deflection (in.) GRIP STRT 10-IAMON PLANK ( 4" WITH) LOA TALE 10301.38.39.4.38.36.34.35.37.39.43.47.5.58.70.85 900 900 800 686 600 534 480 437 400 369 343 30 300 67 40.34.35.33.9.7.6.6.6.6.7.9.30.3.36.41 GRIP STRT 10-IAMON WALKWAY (4" WITH) LOA TALE 300 300 300 300 300 63 13 176 148 16 109 95 83 66 53 43 4-1/ 8.9 104514-.41.41.4.45.48.47.4.40.40.41.43.45.47.55.64.75 14 ga. epth (13.) Walkway 400 400 400 400 400 400 400 400 400 400 380 355 333 96 66 4.3.33.33.33.34.35.36.38.39.41.4.41.41.4.44.47 475 475 475 475 475 40 340 81 36 01 173 151 133 105 85 70 59 4-1/ 1.5 10451-.37.37.38.40.43.43.39.37.37.37.39.41.44.51.59.69.80 1 ga. epth (18.6) Walkway 900 900 900 900 900 900 850 773 709 654 607 567 531 47 45 387 354.34.34.35.35.36.37.37.35.34.33.33.33.33.35.37.40.44 Ladder Rungs 1-iamond Rung STOK Reverse iamond Rungs iamonds can also run the opposite direction by special order. ONSTRTION: hannel with diamonds formed in the web. Also available with reverse diamonds diamonds run opposite way by special order. MATERIAL: 14 ga. galvanized or plain steel HEIGHT: 1-1/8" (Reverse iamond 1-5/8") LENGTH: 10' or cut-to-length (Reverse iamond 3-1/8" long) WITH: -1/" (Reverse iamond 1-5/8") WEIGHT: 1.13#/LF SAFETY FATOR: 1.5 (steel) One diamond GRIP STRT Ladder Rungs offer slip resistant surface! Their unique serrated design provides high traction footing in all directions. utouts & notching available! 1-800-37-380 010 Heavy uty GRIP STRT Plank High Strength-to-Weight Ratio Slip Resistant Surface Handrail rackets Available Open esign Long Life atwalk available in 4' spans! Splice Plates Available MATERIAL: 10 ga. Plain Steel mill galvanized before fabrication (9 & 11 ga. special order) 10 ga. Plain Steel (unpainted & oiled steel) HEIGHTS: Plank: ", -1/", 3", 4" Walkway: 5" depth WITHS: Plank: 9-1/4", 13-3/4", 3-1/4", 7-3/4", 36" Walkway: 4", 30", 36" LENGTHS: 10' or 1' stock lengths or cut-to-size Walkways available up to 4' by special order OPEN AREA: 5% Heavy uty GRIP STRT Safety Grating Products offer the advantages of Regular GRIP STRT Safety Grating but are designed for applications of greater than ordinary load and/or longer span. asic design is the same, but diamond openings are larger and metal is thicker. Heavy uty Grating Products are available in many of the same configurations, materials and finishes as Regular GRIP STRT Safety Grating. Heavy uty GRIP STRT Grating Products include: planks, walkways and stair treads.
Molded Square Series Molded Rectangular Series MS S-100 Non-grit shown MS R-100 Non-grit surface shown MATERIAL: Molded fiberglass shapes made from a polyester or vinyl ester resin matrix PATTERN: Molded Square or Rectangular Series (stock) HEIGHTS: Square 1", 1-1/" or " Rectangular 1" or 1-1/" WITHS: Square 3', 4', or 5' Rectangular 3' or 4' LENGTHS: 8', 10', 1' MOLE MINI-GRI MS M-150 iagram M Molded Mini-Grid Grating MS M-150 McNIHOLS MOLE SQARE iagram S MOLE RETANGLAR iagram R iagram S - Molded Square MS S-100 1.00" 1.50" 1.50" TOP VIEW 1.50".480".1969" SIE 1.00" 1.50".36" 1.50".75" MATERIAL: Molded vinyl ester or polyester fiberglass rovings PATTERN: Square mesh - Top: 3/4" mesh; IN STOK! ottom: 1-1/" mesh HEIGHT: 1-1/" high WITH: 4' x 1' panel WEIGHT: 4.4# sq. ft. SRFAE: Grit RESIN/OLOR: SGF - Green OPEN AREA: 44% RESINS/ SVF - Orange or ark Gray OLORS: SPF - Green or Yellow SGF - Yellow, Green, ark Gray SFF - Light Gray Optional colors available by special order SRFAE: oncave Grit surface also available hemical resistance information is available. Molded Product etails Series Number Height Mesh #SF Open Area MS S-100 1" 1-1/" x 1-1/".60# 70% MS S-150 1-1/" 1-1/" x 1-1/" 3.80# 70% MS S-00 " " x " 4.00# 7% MS M-150 1-1/" Top: 3/4" x 3/4" ottom: 1-1/" x 1-1/" 4.40# 44% MS R-100 1" 1" x 4".80# 69% MS R-150 1-1/" 1-1/" x 6" 3.75# 67% iagram M - Molded Mini-Grid MS M-150 1.50".756".75".1969" TOP VIEW SIE 1.50" 1.50".3543" iagram R - Molded Rectangular 1.00".756" MS R-100 EXTREN Structural Shapes & Plate ONSTRTION/MATERIAL: ombination of fiberglass reinforcements and thermosetting polyester, vinyl ester, or thermal cure resin system. Additional resin information is available. RESINS/OLORS: 55 SPF - Gray; ustom available. Fire retardant isophthalic polyester resin system with V inhibitor unless noted. Visit mcnichols.com for more detail. 1.00" 4.00" FiberglassTreads p.10!.36" 1.00" 1.00" Molded Tread overs MATERIAL: Molded fiberglass WITHS: 9", 10" THIKNESS: 1/8" LENGTHS: 1' RESIN: SGF OLOR: Gray with yellow nosing SRFAE: Grit We have information on chemical resistance. T O P.3150" SIE.3937" How to Order/Specify Simply call 1-800-37-380, and we will be ready to help you with your needs. We can process your inquiry or order more quickly if you have the following information available when you call. ONSIER: 1. Application or use of product. Physical requirements A. Loading. Environment. Percent of open area 3. McNIHOLS Fiberglass Grating 4. Style (molded or pultruded) and resin a. Molded: rectangular or square, bar height and spacing b. Pultruded: bar configuration (I, T, or Rectangular), bar size, and spacing of bearing bars and cross bars as applicable 5. Resin-please see product information. 6. Span-width x length (width is the measurement from end to end of the cross rod. Length is always the bearing bar length. Not applicable for square molded patterns. 7. olor: see product information. Molded or Pultruded Resin Selection Guide Resin/Type SPF Polyester SVF Vinyl ester SGF Polyester SFF Polyester SPH Phenolic NFR Various omposites haracteristics Isophthalic polyester resin is fire retardant and meets the requirements for lass 1 flame rating of 5 or less per ASTM E-84. Vinyl ester resin is fire retardant and meets the requirements for lass 1 flame rating of 5 or less per ASTM E-84. Orthophthalic polyester architectural grade resin is fire retardant and meets the requirements for lass 1 flame rating of 5 or less per ASTM E-84. Isophthalic polyester resin food grade is fire retardant and meets the requirements for lass flame rating of 30 or less per ASTM E-84. Phenolic resin is fire retardant and meets the lass 1 flame rating of 5 or less per ASTM E-84. Has flame spread index of 10 and smoke index of 10. Pultruded Only Special Order This designation of non-fire retardant indicates that the composite is non-fire retardant. Pultruded Floor Plate Fire Retardant Lightweight orrosion Resistant High Strength ost Effective Many thicknesses available! ONSTRTION/MATERIAL: Pultruded fiberglass polyester solid floor plate THIKNESSES/WEIGHTS: 1/8" - 1.41#SF STOK 1/" - 4.68#SF SPEIAL 3/16" - 1.71#SF SPEIAL 5/8" - 5.79#SF SPEIAL 1/4" -.34#SF STOK 3/4" - 6.94#SF SPEIAL 3/8" - 3.54#SF SPEIAL 1" - 9.7#SF SPEIAL TO PLAE AN ORER ALL: 1-800-37-380 FAX: See inside front cover for nearest service center. SIZE: 4' x 8' panels RESIN: SPF OLOR: Gray SRFAE: Fine grit (standard) medium or coarse grit (optional) 010 Service, Quality, and Performance. 1-800-37-380
Pultruded I-ar MS I-4015 with grit Pultruded I-ar Phenolic Grating Ask us! MS I-6015 without grit Pultruded T- ar NEW! Meets Requirements for VG Act! MS I-4010 with grit MS I-6515 with grit Fire Retardant Non onductive orrosion Resistant MATERIAL: Pultruded fiberglass shapes made from polyester or vinyl ester (special) resin with 3 piece cross rod assembly PATTERN: HEIGHTS: 1", or 1-1/" WITHS: 3', 4', or 5' I-ar shaped bearing bars with perpendicular cross bar rods placed every 6" (1" special) Pultruded I-ar is manufactured with a high percentage of glass within the laminate, providing durability, extremely high unidirectional strength and stiffness. V coating available by special order. MS I-ar Series earing ar Size Series Number #/SF A Open Area Width EN VIEW 1.00" x.60" 1.50" x.60" 1.00" x.60" MS I-4010 MS I-4015 MS I-6010 3.40# 4.0#.40# 1.00" 1.00" 1.50".40".40".90".40".40".90" 40% 40% 60% 1.50" x.60" MS I-6015 3.00# 1.50".90".90" 60% A 1.50" x.60" MS I-6515.70# 1.71" 1.11" 1.11" 65% A = enter to center of bearing bars = Spacing between bearing bar top flanges = Spacing between bearing bar bottom flanges MATERIAL: Pultruded fiberglass shape made from polyester or vinyl ester resin matrix PATTERN: T-ar with perpendicular cross bars 6" cross bars standard (1" special) HEIGHTS: 1", 1-1/", or " STOK Pultruded T-ar Series Width hemical resistance information for resins is available ask us! LENGTHS: 8', 10', 1', 0' RESIN/ SPF - Yellow or gray (stock) OLORS: SVF - Yellow or gray (special) NEW! SPH - Phenolic rown (special) SRFAE: Gritted or Plain LOAING: Inside ack over or mcnichols.com Fiberglass Treads p.10! STOK WITHS: 3', 4' or 5' LENGTHS: 8', 10', 1', 0' RESINS/ SPF (stock) Yellow or gray OLORS: SVF (special) Yellow or gray SPW White White - non fire-retardant MS T-1810 SRFAE: With grit Other resins available! earing ar Size Item Number #/SF A Open Area.00" x 1.00" MS T-170 4.8# 1.0".00".600" 17% 1.50" x 1.00" MS T-5015 1.9#.00" 1.000" 1.65" 50% MS T-170 with grit EN VIEW Wide T-ar Series A.00" x 1.00" MS T-500 3.1#.00" 1.000" 1.400" 50% earing ar Size Item Number #/SF A Open Area Pultruded T- ar Width 1.00" x 1.65" MS T-110.8# 1.85".5" 1.350" 1% H Rectangular ar MS T-500 with grit Lighter uty Rectangular ar Available Ask us! MSH R-605 with grit Height Pultruded Fiberglass Heavy uty Rectangular ar is designed to take heavy wheel traffic. ue to the variety of wheel types and loading contact our ustomer Service Specialists to determine the type of heavy duty grating required. Heavy uty Rectangular ar MSH Series Height 1.00" x 1.65" MS T-1810.6#.00".375" 1.500" 18% A 1.00" x 1.65" MS T-3810.1#.6".995".10" 38% EN VIEW A = enter to center of bearing bars = Spacing between bearing bar top flanges = Spacing between bearing bar bottom flanges earing Series Open ar Size Number #/SF A Area Width Special 1.00" x.60" MSH R-6010 4.90# 1.50".90".90" 60% Order! 1.5" x.60" MSH R-601 5.90# 1.50".90".90" 60% 1.50" x.60" MSH R-6015 7.00# 1.50".90".90" 60% 1.75" x.60" MSH R-6017 8.00# 1.50".90".90" 60%.00" x.60" MSH R-600 9.00# 1.50".90".90" 60%.5" x.60" MSH R-60 10.10# 1.50".90".90" 60% EN VIEW A.50" x.60" MSH R-605 11.10# 1.50".90".90" 60% A = enter to center of bearing bars = Spacing between bearing bar top flanges = Spacing between bearing bar bottom flanges We read blueprints & fabricate to spec! 1-800-37-380 010
1" 18" 4" 30" 36" SPAN 1" 18" 4" 30" 36" 4" 48" 54" MS S-100 1" Ht. MS S-00 " Ht. Molded Square LOA TALE 50 100 150 00 50 300 400 500 <.010 <.010 <.010 <.010 <.010 <.010 <.010.010 4000 <.010 <.010 <.010 <.010 <.010.010.013.016 000 <.010 <.010.01.016.00.04.03.040 1813 <.010 <.010.013.017.01.06.034.043 1360.010.01.031.04.05.063.083.104 960 <.010.017.05.033.04.050.067.083 960.03.046.069.09.114.137.183.9 640.015.09.044.059.073.088.117.146 800.044.089.133.177..66.355.444 453.04.047.071.095.118.14.189.37 680.08.164.45.37.409.491.654 331 LOA Molded Square Load Tables SPAN LOA TALE LOA 50 100 150 00 50 300 400 500 SPAN For All Load Tables on this Page is concentrated load lbs/ft of width is deflection under concentrated load is uniform load lbs/ft is deflection under uniform load 1" 18" 4" 30" 36" 4" 48" SAFE LOA 5:1 SAFETY FATOR <.010 <.010.013.017.01.05.034.04 1360 <.010.014.00.07.034.041.054.068 680.01.041.06.08.103.13.164.05 666.0.044.066.088.110.131.175.19 500.064.18.19.56.30.384.51.640 380.051.10.154.05.56.307.409.51 380.155.309.464.619 40.099.198.97.396.495.594 300.318.635 1-1/" x 1-1/" 160.169.339.508.677 square mesh 40 MS S-150 1-1/" Ht. Molded Square LOA TALE SAFE LOA 5:1 SAFETY FATOR LOA 50 100 150 00 50 300 400 500 <.010 <.010 <.010 <.010 <.010.011.014.018 310 <.010 <.010 <.010.011.014.017.03.08 1560 <.010.014.01.08.036.043.057.071 1386 <.010.015.03.030.038.046.061.076 1040.01.04.063.084.104.15.167.09 780.017.033.050.067.084.100.134.167 780.047.094.141.188.35.83.377.471 496.030.060.090.11.151.181.41.301 60.096.19.88.384.480.576 347.051.10.154.05.56.307.410.51 50.175.350.55 51.080.160.40.30.400.480.641.801 440.87.573 1-1/" x 1-1/" 170.115.9.344.459.573.688 square mesh 340 SAFE LOA 5:1 SAFETY FATOR.037.075.11.150.187.4.99.374 580.135.70.405.541 60.054.108.16.16.70.34.43.541 50.10.40.630 " x " 04.075.149.4.98.373.448.597 square mesh 460 MS T-500 " Ht. Pultruded T-ar SAFE LOA LOA TALE :1 SAFETY SPAN LOA 100 00 300 400 500 750 1000 000 3000 4000 5000 6000 7000 8000 FATOR.000.001.001.001.00.003.004.007.011.014.018.01.05.08 11333 1".001.001.00.00.003.004.006.011.017.03.08.034.040.045 5666.00.003.005.007.009.013.017.035.05.070.087.104.1.139 7536 18".00.004.006.007.009.014.019.037.056.074.093.111.130.148 5666.005.011.016.01.07.040.054.107.161.14.68.31.375.49 5666 4".004.009.013.017.01.03.043.086.19.171.14.57.300.343 5666.013.06.038.051.064.096.18.56.384.51.640 366 30".008.016.05.033.041.061.08.164.46.37.409.491.573.655 4534.06.05.078.104.130.195.60.50 519 36".014.08.04.055.069.104.139.77.416.555.694 3778.047.095.14.190.37.356.474 1850 4".0.043.065.087.108.163.17.433.650 338.079.158.38.317.396.594 1417 48" NOTE: When 100.03.063.095.17.158.38.317.634 pounds per square 834 54" 60".15.50.374.499.64 foot uniform load is 110 placed upon a 64".044.089.133.178..333.444 simple span, it will 519.188.375.563.751 produce a deflection 907 of 1/4" at midspan..060.10.180.40.300.450.601 67.7.544 749 66".079.158.37.316.395.593 Longer spans available 060 SPAN 1" 18" 4" 30" 36" 4" SPAN 1" 18" 4" 30" 36" 4" 48" SAFE LOA LOA TALE :1 SAFETY SPAN LOA 100 00 300 400 500 750 1000 000 3000 4000 5000 6000 7000 FATOR 1" 18" 4" 30" 36" 4" 48" 54" SAFE LOA MS R-100 1" Ht. Molded Rectangular LOA TALE 5:1 SAFETY LOA 50 100 150 00 50 300 400 500 FATOR <.010 <.010 <.010.011.014.017.0.08 1960 <.010 <.010.013.018.0.07.035.044 980.01.05.037.049.06.074.099.13 960.013.06.039.053.066.079.105.131 70.037.074.11.149.186.3.98.37 560.030.060.089.119.149.179.38.98 560.088.176.64.35.440.58 336.056.113.169.5.8.338.451.563 40.176.353.59 40.094.188.8.376.470.564 360.316.63 1" x 4" 183.144.89.433.577 rectangular mesh 30 MS R-150 1-1/" Ht. Molded Rectangular LOA TALE SAFE LOA 5:1 SAFETY LOA 50 100 150 00 50 300 400 500 FATOR <.010 <.010 <.010 <.010.011.014.018.03 47 <.010 <.010.011.015.018.0.09.037 136 <.010.018.07.035.044.053.071.089 171.010.019.08.038.047.057.076.095 184.019.038.056.075.094.11.150.188 956.015.030.045.060.075.090.10.150 956.039.078.117.156.195.33.311.389 587.05.050.075.100.15.150.00.50 734.071.143.14.85.357.48 385.038.076.114.15.190.8.304.381 578.16.5.378.504.630 370.058.115.173.30.88.346.461 47.07.414.61 1-1/" x 6" 184.083.160.48.331.414.497 rectangular mesh 368 MS I-6015 1-1/" Ht. Pultruded I-ar.001.001.00.003.003.005.006.013.019.06.03.038.045 17601.001.003.003.009.007.0.00.006.006.018.015.043.003.009.010.07.0.065.004.005.008.010.01.015.03.030.013.016.04.03.037.046.069.091.09.037.055.073.086.108.161.15.00.061.065.183.146.430.031.091.097.74.0.646.041.11.19.366.93.051.15.16.457.366.061.07.18.1.194.6.549.640.439.51 8800 783 5867 4400 4400 773.014.08.041.055.069.103.138.76.413.551 We an 3467 ut to.044.087.131.175.18.37.436 1896 Size!.03.047.070.093.116.175.33.466 845.079.036.159.07.38.109.317.396.595.145.181.7.36 NOTE: When 100 pounds per square foot uniform load is placed upon a 56" simple 1361 381.133.66.400.533.666 span, it will produce a deflection 1017.053.107.160.13.66.400.533 of 1/4" at midspan. 033.11.4.633 777 Longer spans available.075.150.5.300.375.563 1748 SAFPLANK Fiberglass Plank System Low conductivity Fire retardant Low maintenance Interlocking Non-sparking ONSTRTION/MATERIAL: omposite of fiberglass reinforcements (glass and mat) and a V inhibited thermoset resin system. SAFEK Fiberglass ecking also available! Slotted SAFPLANK 010 We support Green uild! 1-800-37-380