IAPMO RESEARCH AND TESTING, INC. 5001 E. Philadelphia Street, Ontario, CA 91761-2816 (909) 472-4100 Fax (909) 472-4244 www.iapmort.org CERTIFICATE OF LISTING IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. The most updated information on this Certificate of Listing is available online at pld.iapmo.org Effective : June 2017 - Rev. 7/20/2017 - Void After: June 2018 Product: EPA WaterSense High Efficiency Lavatory Faucets File No. 5672 Issued To: CHUNG CHENG FAUCET CO., LTD. 279 HSING HO ROAD WANG TYAN VILLAGE, TATU HSIANG TAICHUNG R.O.C. TAIWAN Identification: Each product shall be marked per the marking requirements of the applicable performance standard. The product packaging shall bear the EPA WaterSense label. Characteristics: Lavatory faucets manufactured in compliance with the applicable requirements of the EPA WaterSense High Efficiency Lavatory Faucet Specification. To be installed in accordance with the manufacturer's installation instructions. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory s compliance to the applicable requirements of ISO/IEC 17025. Products are in compliance with the following standard(s): EPA WaterSense High Efficiency Lavatory Faucet Specification (version 1.0, 10-1-07 edition) This listing period is based upon the last date of the month indicated on the Effective and Void After shown above. Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc. Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.
MODELS: Certification 6/8/2008 CCF, KOSPAK W10X- 6/8/2008 CCF, KOSPAK W11X- 6/8/2008 CCF, KOSPAK W23X- 6/8/2008 CCF, KOSPAK W24X- 6/8/2008 CCF, KOSPAK W29X- 6/8/2008 CCF, KOSPAK W31X- 6/8/2008 CCF, KOSPAK W33X- 6/8/2008 CCF, KOSPAK W37X- 6/8/2008 CCF, KOSPAK W40X- 6/8/2008 CCF, KOSPAK W41X- 6/8/2008 CCF, KOSPAK W42X- 6/8/2008 CCF, KOSPAK W46X- 6/8/2008 CCF, KOSPAK W47X- 6/8/2008 CCF, KOSPAK W64X- 6/8/2008 CCF, KOSPAK W69X- 1) POSITION 1ST & 2ND X REPRESENT FOR HANDLES (AA-ZZ) 2) POSITION 3RD & 4TH X USE ALPHABET TO REPRESENT ESCUTCHEON (AA-ZZ) IF WITHOUT ESCUTCHEON USE "00" TO REPLACE 3) POSITION 5TH & 6TH ALPHABET TO REPRESENT SPOUT (AA-ZZ) ALTERNATED TO MATCH POSITION 1ST & 2ND 4) POSITION 7TH X REPRESENT pop-up 5) POSITION 8TH & 9TH X REPRESENT finish AB: Antique Brass CP: Chrome Plated CB: Chrome/Polished Brass CT: Chrome/PVD GC: Gun Metal/Chrome GM: Gun Metal GT: Gun Metal/Titanium IB: Ivory/Polished Brass IC: Ivory/Chrome IV: Ivory PB: Polished Brass SA: Satin Nickel/Chrome SC: Satin Chrome SE: Satin Chrome/Chrome SN: Satin Nickel ST: Satin Nickel/Titanium TI: PVD 9/3/2010 CCF, KOSPAK WN11X- C2-9/3/2010 CCF, KOSPAK WN11X- W2- The 1st and 2nd can be replaced with CA, CB, CC, CD, CR, CS, EA, EA, EB, EC, ED, EF, EJ, EL, EN,EP, ER, EW, EX, EX, EZ, FC, FE, FF, FG, GA, GB, GC, GG, KQ, or LF indicating the handle style. The 3rd and 4th can be replaced with AC or AI indicating the escutcheon style. The 5th and 6th can be replaced with PW or PX indicating the spout style. The 8th X is being replaced with C or W indicating the combined valve style. The 9th X is being replaced with 2 indicating the combined pipe style. The 10th and 11th can be replaced with AB, CP, CB, CT, IV, IB, IC, PB, SN, ST, SA, TI, GM, 9/3/2010 CCF, KOSPAK WN23XW- 9/3/2010 CCF, KOSPAK WN23XC- Page 2 of 8
The 1st and 2nd can be replaced with CA, CB, CC, CD, CR, CS, EA, EA, EB, EC, ED, EF, EJ, EL, EN, EP, ER, EW, EX, EX, EZ, FC, FE, FF, FG, GA, GB, GC, GG, KQ, or LF indicating the handle style. The 3rd and 4th can be replaced with CC, CI, CJ, CN, CT, CY or CZ indicating the escutcheon style. The 5th and 6th can be replaced with GA, GF, or GP indicating the spout style. The 8th X is being replaced with C or W indicating the combined valve style. The 9th and 10th can be replaced with AB, CP, CB, CT, IV, IB, IC, PB, SN, ST, SA, TI, GM, 9/3/2010 CCF, KOSPAK WN24XW- 9/3/2010 CCF, KOSPAK WN24XC- The 1st and 2nd can be replaced with CA, CB, CC, CD, CR, CS, EA, EA, EB, EC, ED, EF, EJ, EL, EN, EP, ER, EW, EX, EX, EZ, FC, FE, FF, FG, GA, GB, GC, GG, KQ, or LF indicating the handle style. The 3rd and 4th can be replaced with AC, or AI indicating the escutcheon style. The 5th and 6th can be replaced with PW, or PX indicating the spout style. The 8th X is being replaced with C or W indicating the combined valve style. The 9th and 10th can be replaced with AB, CP, CB, CT, IV, IB, IC, PB, SN, ST, SA, TI, GM, 9/3/2010 CCF, KOSPAK WN26XW- 9/3/2010 CCF, KOSPAK WN26XC- The 1st and 2nd can be replaced with CA, CB, CC, CD, CR, CS, EA, EA, EB, EC, ED, EF, EJ, EL, EN, EP, ER, EW, EX, EX, EZ, FC, FE, FF, FG, GA, GB, GC, GG, KQ, or LF indicating the handle style. The 3rd and 4th can be replaced with CA, or CL indicating the escutcheon style. The 5th and 6th can be replaced with (Brass AB, AD, or AQ) and (stainless steel SA, SB, or SC) indicating the spout style. The 8th X is being replaced with C or W indicating the combined valve style. The 9th and 10th can be replaced with AB, CP, CB, CT, IV, IB, IC, PB, SN, ST, SA, TI, GM, 9/3/2010 CCF, KOSPAK WN41XA- 9/3/2010 CCF, KOSPAK WN41XB- 9/3/2010 CCF, KOSPAK WN42XA- 9/3/2010 CCF, KOSPAK WN42XB- The 1st and 2nd ** can be replaced with IA, IB, IC, ID, IE, IF, IG, IH, II, IJ, IK, IL, IM, IN, IP, IQ, IR, IS, IT, IU, IY, or JC indicating the handle style. The 3rd and 4th ** can be replaced with EA, EE, EH, or EI indicating the escutcheon style. The 5th and 6th ** can be replaced with PL, PM, or PN indicating the spout style. The 7th * can be replaced with A, B or N indicating the combined Pop-up style. The 8th * can be replaced with A or B indicating the combined ball valve style. The 9th and 10th ** can be replaced with AB, CP, CB, CT, IV, IB, IC, PB, SN, ST, SA, TI, GM, 3/6/2009 CCF, KOSPAK WN37X-A- 3/6/2009 CCF, KOSPAK WN37X-B- Page 3 of 8
The 1st and 2nd ** can be replaced with VA, TW, TJ, TI, TG, TF or TE indicating the handle style. The 3rd and 4th ** can be replaced with GD, HG, HB and HH indicating the escutcheon style. The 5th and 6th ** can be replaced with (RV, RR and RY) with A body or (PF, PH and PG) with B body indicating the spout style. The 8th X is being replaced with A or B indicating the body style. The 9th and 10th ** can be replaced with AB, CP, CB, CT, IV, IB, IC, PB, SN, ST, SA, TI, GM, GC, GT, SC, and SE indicating the finish "AB": Antique Brass "CP": Chrome Plated "CB": Chrome/Polished Brass "CT": Chrome/PVD "IV": Ivory "IB": Ivory/Polished Brass "IC": Ivory/Chrome "PB": Polished Brass "SN": Satin Nickel "ST": Satin Nickel/Titanium "SA": Satin Nickel/Chrome "TI": PVD "GM": Gun Metal "GC": Gun Metal/Chrome "GT": Gun Metal/Titanium "SC": Satin Chrome "SE": Satin Chrome/Chrome 9/3/2010 CCF, KOSPAK WN29X- The 1st and 2nd can be replaced with CA, CB, CC, CR, EA, EB, EC, ED, EF, EJ, EK, EL, EM, EN, EP, ER, EW, EX, EZ, FC, FE, FF, FG, GA, GB, GC, GG, PB, PF, PH, PK, PN, PR, PT, PU, PX, PZ, QC, QF, QM, QN, QQ, QS, QT, QU, QW, QY, QZ, KR, or LF indicating the handle styles. The 3rd and 4th can be replace with OO for escutcheons. (The 3rd and 4th can be replaced with PA, PE, or PF indicating the escutcheon style with N83B only. The 5th and 6th can be replaced with (Brass CB, or CJ) and (stainless steel SD, or SE) indicating the spout style. The 8th and 9th can be replaced by AB, CP, CB, CT, IV, IB, IC, PB, SN, ST, SA, TI, GM, GC, GT, SC, SE indicting the finish. ADDITIONAL COMPANIES: Banner International, LLC Certification 7/20/2017 BANNER 10X-D 7/20/2017 BANNER 10X-DB 7/20/2017 BANNER 10X-DLP 7/20/2017 BANNER 401 7/20/2017 BANNER 401-GD 7/20/2017 BANNER 401-LP 7/20/2017 BANNER H401 7/20/2017 BANNER H401-GD 7/20/2017 BANNER H401-LP 7/20/2017 BANNER 301 7/20/2017 BANNER 301-B 7/20/2017 BANNER 301-LP 7/20/2017 BANNER 301-M 7/20/2017 BANNER 301-BM 7/20/2017 BANNER 301-LPM Page 4 of 8
7/20/2017 BANNER 301-W 7/20/2017 BANNER 301-WB 7/20/2017 BANNER 301-WB-LP 7/20/2017 BANNER 31X 7/20/2017 BANNER 31X-B 7/20/2017 BANNER 31X-LP 7/20/2017 BANNER 181 7/20/2017 BANNER 181-WB 7/20/2017 BANNER 18XHA-CL 7/20/2017 BANNER 181HA-M 7/20/2017 BANNER 181HA-WB 7/20/2017 BANNER C18XHA 7/20/2017 BANNER 191 7/20/2017 BANNER 191-M 7/20/2017 BANNER 19XHA-CL 7/20/2017 BANNER 69X-B 7/20/2017 BANNER 69X-C 7/20/2017 BANNER 69X-X 7/20/2017 BANNER 70XBAR-B 7/20/2017 BANNER 31XCDA-B-CL 7/20/2017 BANNER 31XCDA-LP-CL 7/20/2017 BANNER T21X-B 7/20/2017 BANNER T21X 7/20/2017 BANNER 35X-B 7/20/2017 BANNER 35X-XWB 7/20/2017 BANNER 60X-B 7/20/2017 BANNER 60X-C 7/20/2017 BANNER 60X-X 7/20/2017 BANNER 70X-B 7/20/2017 BANNER 85X-B 7/20/2017 BANNER 85X-C 7/20/2017 BANNER 89X-B 7/20/2017 BANNER 50X 7/20/2017 BANNER 50X-B 7/20/2017 BANNER 50X-GD 7/20/2017 BANNER 50X-LP 7/20/2017 BANNER 55X 7/20/2017 BANNER 55X-B 7/20/2017 BANNER 55X-LP 7/20/2017 BANNER 52X-B 7/20/2017 BANNER 11X-DB 7/20/2017 BANNER 11XCL-B 7/20/2017 BANNER C11X-B 7/20/2017 BANNER 67X-B 7/20/2017 BANNER 67X-C 7/20/2017 BANNER 77X-SB 7/20/2017 BANNER 77X-SWB 7/20/2017 BANNER 95X-B 7/20/2017 BANNER 95X-C 7/20/2017 BANNER 70XWS-B 7/20/2017 BANNER 70XWSK-SB 7/20/2017 BANNER SH52X-B 7/20/2017 BANNER 90X-B Page 5 of 8
NOTE: The following finishes are denoted on BANNER faucet models by using these number codes in place of "X" where shown above: 1 = Chrome 6 = Brushed Nickel 2 = Polished Brass 7 = PVD 3 = Antique Brass 8 = Brushed Nickel/PVD 4 = Chrome/Polished Brass Comb. 9 = Vintage Bronze 5 = White/Chrome Comb. NOTE: The above BANNER models are complete with handles or are available with various handle options by placing the following suffix after the above model numbers: A = Acrylic M = Metal handle B = Brass Lever Handle O = Oak Lever Handle C = Ceramic Lever Handle X = Cross Handle CL = Large Contemporary Lever Handle LE = Large Euro Rope Handle E = Euro Rope Handle XW = White Cross Handle L = Contemporary Lever Handle WB = Wristblade Handle NOTE: The above BANNER models are available in various packaging. Faucets are available in show packaging or color boxes unless denoted with the following prefixes before the above model numbers. B = Plain Box Package TP = Trac-Pack Package C = Clam Shell Package WB = White Box Package MH = Manufactured Housing Package Kissler & Co. Inc. Certification 7/13/2017 DOMINION 77-1005 7/13/2017 DOMINION 77-1006 7/13/2017 DOMINION 77-1105 7/13/2017 DOMINION 77-1106 7/13/2017 DOMINION 77-1180 7/13/2017 DOMINION 77-1181 7/13/2017 DOMINION 77-1185 7/13/2017 DOMINION 77-1190 7/13/2017 DOMINION 77-1191 7/13/2017 DOMINION 77-1626 7/13/2017 DOMINION 77-1631 7/13/2017 DOMINION 77-1632 7/13/2017 DOMINION 77-1903 7/13/2017 DOMINION 77-1910 7/13/2017 DOMINION 77-2180 7/13/2017 DOMINION 77-2181 7/13/2017 DOMINION 77-3005 7/13/2017 DOMINION 77-3006 7/13/2017 DOMINION 77-3007 7/13/2017 DOMINION 77-3190 7/13/2017 DOMINION 77-3191 7/13/2017 DOMINION 77-3291 7/13/2017 DOMINION 77-3293 7/13/2017 DOMINION 77-3302 7/13/2017 DOMINION 77-3303 7/13/2017 DOMINION 77-3390 7/13/2017 DOMINION 77-3391 7/13/2017 DOMINION 77-3400 7/13/2017 DOMINION 77-4105 Page 6 of 8
7/13/2017 DOMINION 77-4300 7/13/2017 DOMINION 77-4305 7/13/2017 DOMINION 77-5505 7/13/2017 DOMINION 77-5700 7/13/2017 DOMINION 77-5705 7/13/2017 DOMINION 77-7712 7/13/2017 DOMINION 77-7717 Strehl LLC Certification PLL4280--LF PBBA3200--LF PBBL3280--LF PBLA2200--LF PBLL2280--LF LA2200--LF LL2230--LF BA3200--LF BL3270--LF BL3230--LF BL3230-6--LF PBL3280--LF PLL2280--LF PBLA4200--LF PBLL4280--LF LL42310--LF LL42310-LP--LF LA4200-LP--LF LL4240-LP--LF LL423014-LP-- LF LL4230-LP--LF LL423014--LF LL42311--LF LL4260--LF LL4116-LP--LF Page 7 of 8
LL4116B-LP--LF LL4116B--LF LL4119-LP--LF LL4110-LP--LF LA4100-LP--LF LL4120-LP--LF LL4111-LP--LF Finishes -: CP: Chrome Plate AB: Antique Brass GM: Gun Metal IV: Ivory SN: Satin Nickel Page 8 of 8