NB: models, Codes and Specifications may be subject to change without notice. SECTION A OIL PILOT CONTROLS SVM400 ** NEW ** SV10 SV20 SV30 SVP500 SV40 SV50/51 SV60 SV70 Valve Series PAGE HYDRAULIC PILOT VALVES SVM400 Series...... A 46 SV10 Series...... A 48 SV20 Series...... A 49 SV30 Series...... A 50 SV40 Series...... A 52 SV60 Series...... A 53 SV70 Series...... A 54 CURVE OPTIONS FOR SV Series...... A 55 SV50 Series...... A 56 SVP500 Series...... A 57 CONTROLLER HANDLES...... A 64 NB: models, Codes and Specifications may be subject to change without notice.
HYDRAULIC PILOT VALVES SVM400 Series Monoblock Dual Axis Joystick Hydraulic Pilot Valve with 1 lever and 4 workports for simultaneous operation of 2 valve sections. Type MIN L/MIN MAX L/MIN Max Max Back Press on T SVM400/01B/01W-M001A 5 20 100 3 The above unit is fitted with spring Curve Kit 001A = 5.8 to 22 - Please refer to Page A53 for other available Spring Curve Kits. TYPE - 01 TYPE - 09 TYPE - 16 Spring return in neutral position. Cross movement selector. Movement detection on each port. A46 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
SVM400 OPTIONS The pictures below show the rubber boot configurations available for the SVM400 series pilot operated valve, relative to the different handle options. Series 10 - optional handles W: Without switches X: With upper spring return push-button Z: With upper detent push-button Y: With 3 position spring return rocker switch K: With upper protected spring return push-button T: With 3 position detent rocker switch Series 40 - optional handles H: Fitted with up to 8 microswitch push-button, with rocker switch and dead man switch. HW: Fitted with up to 4 push-buttons (400mA types), with dead man switch. HT: Fitted with up to 4 push-buttons (5A types), with rocker switch, dead man switch and ON/OFF switch. HZ: With potentiometer, fitted with up to 2 microswitch push-button, dead man and ON/OFF switch. April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A47
SV10 Series HYDRAULIC PILOT VALVES Monoblock Single Axis Joystick Hydraulic Pilot Valve with 1 lever and 2 work ports. For Handle Options - Please refer to page A57. Image: SV10 Type Max Back Min Max. Max Press on T L/MIN L/MIN The above unit is fitted with spring Curve Kit 001A = 5.8 to 22 - Please refer to Page A53 for other available Spring Curve Kits. SV10-B/01G-001A-001A 5 15 100 64 3 A48 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
HYDRAULIC PILOT VALVES SV20 Series Monoblock Hydraulic Pilot Valve with 2 levers and 4 work ports. For Handle Options - Please refer to page A63. Image: SV20 Type Max Back Min Max. Max Press on T L/MIN L/MIN The above unit is fitted with spring Curve Kit 001A = 5.8 to 22 - Please refer to Page A49 for other available Spring Curve Kits. SV20-B/01G-001A-X4 5 15 100 64 3 April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A49
SV30 Series HYDRAULIC PILOT VALVES Sectional Hydraulic Pilot Valves with 3 to 7 levers. For Handle Options - Please refer to page A63. Image: SV30 Type SV30/3-B/01G-001A-X6 SV30/4-B/01G-001A-X8 SV30/5-B/01G-001A-X10 SV30/6-B/01G-001A-X12 SV30/7-B/01G-001A-X14 MIN Max. Press on A Max L/MIN L/MIN Max Back Press on T 5 15 100 64 3 The above unit is fitted with spring Curve Kit 001A = 5.8 to 22 - Please refer to Page A53 for other available Spring Curve Kits. A50 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
CONTROL OPTIONS for SV10, SV20, SV30 STANDARD 01 Control - Spring centred to neutral position. (STANDARD) 03 Control - With friction (stop in any position) and neutral sensing. 05 Control - Detent in position 1, spring centred to neutral position. 06 Control - Detent in position 2, spring centred to neutral position. 07 Control - Detent in position 1 and 2, spring centred to neutral position. 02 Control Detent in neutral, lift to release. 10 Control - With friction (stop in any position). Detent in neutral, lift to release. 11 Control - Detent in positions 1 and 2. Detent in neutral, lift to release. For pricing and technical information please contact one of our sales staff. April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A51
SV40 Series HYDRAULIC PILOT VALVES Monoblock Hydraulic Pilot Valve with 2 foot pedals and 2 work ports. Image: SV40 Min Max. Max Max Back Press on T L/MIN L/MIN SV40-B/001C-001C 5 15 100 64 3 The above unit is fitted with spring Curve Kit 001C = 5.8 to 22 - Please refer to Page A55 for other available Spring Curve Kits. A52 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
HYDRAULIC PILOT VALVES SV60 Series Monoblock Hydraulic Pilot Valve with 2 foot pedals and 2 work ports. Image: SV60 Max Back Min Max. Max Press on T L/MIN L/MIN SV60-B/001C 5 15 100 64 3 The above unit is fitted with spring Curve Kit 001C = 5.8 to 22 - Please refer to Page A55 for other available Spring Centre Kits. April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A53
SV70 Series HYDRAULIC PILOT VALVES SV70 - Monoblock Unit with screw adjustable knobs 1 x work port. SV71 - Monoblock Unit with push button 1 x work port. Image: SV70 Type SV70-B/001C SV71-B/001C Max Back Min Max. Max Press on T L/MIN L/MIN 5 15 100 64 3 The above unit is fitted with spring Curve Kit 001C = 5.8 to 22 - Please refer to Page A55 for other available Spring Centre Kits. SV70 SV71 A54 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
CURVE OPTIONS FOR SV Series 0... Pressure control curves with STEP. TYPE PRESSUE STROKE mm TYPE PRESSURE STROKE mm A B C D A B C D 001 5.8 22 1.8 8.5 037 5 21 1.2 6.5 002 6 22.5 2 6.5 038 22 37 1 8.5 003 5.5 28.5 1 8.5 039 2 8 0.5 6.5 004 4.9 18.9 1 8.5 040 6.6 20.7 1 8.5 005 15.1 27.4 1.2 6.5 041 8 20.7 1.8 8.5 007 6 37 1 8.5 042 2 13 1 8.5 008 9.8 26 1.8 8.5 043 3.2 11.7 1.8 8.5 010 3.25 47 1 8.5 044 5.8 22.5 1.6 7.2 012 6 21.7 2 6.3 048 7 22.1 1.2 7.5 013 5 12 1 8.5 053 8 22.3 1 8.5 014 3.2 17.2 2 8.5 056 3.2 17.2 1 8.5 016 6 21.7 2 6.3 057 1 13 1.8 8.5 017 5 12 1 8.5 061 1.5 8.5 1 8.5 018 5.9 12.9 1 8.5 064 0.5 18.4 1.8 8.5 019 0.5 11.4 1.8 8.5 065 2 20.5 1 8.5 020 4.3 15.2 1 8.5 068 2 27.5 1 8.5 021 6 16.3 1.6 7.2 069 3 10.5 0.5 8.5 022 1 8 1 8.5 070 5.8 22.4 1 8.5 023 2 11.5 1 8.5 073 4 18 1 8.5 024 5.8 19 1.8 7.5 074 5 25 2 7.8 025 5.8 19 0.9 6.5 075 5 15 1 8.5 026 6.5 14 1 8.5 077 5 26.9 1.2 8.5 027 3 9 2 8.5 080 4 11 1 8.5 028 5 21 1.1 8.7 081 8 14.5 1 7.5 029 2 11.5 2 8.5 082 8 22.2 1 8.5 030 0 13 0.5 8.5 083 0 64 1.5 8.5 031 5.8 19 1.6 7.2 084 5.7 24.2 1 8.5 032 3.4 29.4 1 8.5 085 6 25 0.9 8.5 033 5.8 19 1 8.5 086 4 16.5 0.8 7.5 1... Pressure control curves without STEP. TYPE PRESSUE STROKE mm TYPE PRESSURE STROKE mm A B C D A B C D 101 4.4 19.8 0.4 9 136 5.8 23 1.8 9 103 6 30 2 9 150 8 15 2 9 104 8.2 55 1 9 151 0 40 1 5.4 105 2 8 2 9 152 3 23 0.9 9 106 6 40 0.9 9 154 2 15 0.9 9 107 4 19.4 0.4 9 162 0.7 30 1 9 111 5.5 25.5 0.9 9 163 1.4 11.5 1 9 113 5 21.7 1.2 9 166 4.3 15 1.6 9 114 4 10 2 9 167 5 18 2 9 128 0 64 2 9 169 9.8 21 1.1 7.4 134 5.8 23 1.6 9 175 5 16 1 9 135 5.8 23 0.9 9 178 6.5 17.8 1.1 7 179 6.5 17 1.1 9 April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A55
SV50 Series HYDRAULIC PILOT VALVES Monoblock Hydraulic Pilot Valve with 2 way rocker pedal. Image: SV50 Type Min Max. Max Max Back Press on T SV50-B/001C-001C SV51-B/001C-001C L/MIN L/MIN 5 15 100 64 3 The above unit is fitted with spring Curve Kit 001C = 5.8 to 22 - Please refer to Page A55 for other available Spring Curve Kits. ANGLED ROCKER PEDAL - SV51 A56 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
HYDRAULIC PILOT VALVES SVP500 Series Monoblock Hydraulic Pilot Valve with Rocker, Foot Pedal and 2 work ports. Image: SVP500 Type SVP500-B/01-P051BX2 SVP510-B/01-P051BX2 Min Max. Max Press on P Max Back Press on T L/MIN L/MIN 5 15 100 64 3 The above unit is fitted with spring Curve Kit 001C = 5.8 to 22. SVP510 Monoblock angled rocker pedal SVP500 April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A57
A58 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004