nvil-strut Price Sheet S-3.11C Effective: March 28, 2011 Cancels Price Sheet S.06.10C of June 28, 2010 FOR THE MOST CURRENT PRODUCT/PRICING INFORMTION ON NVIL PRODUCTS, PLESE VISIT OUR WEBSITE T WWW.NVILINTL.COM FREIGHT LLOWNCE: ll prices quoted F.O.B. our Distribution Centre, Simcoe, Ontario; lberta; Quebec or freight equalized thereon; with full freight allowed on 1,000 lbs. or $1,500 to recognized delivery points in Canada. ll shipments will be made from the nearest distribution centre via the least expensive mode, unless otherwise instructed. Whenever a buyer selects a more expensive method for shipment, or alternate distribution centre, the difference in transportation costs will be for the buyer s account. NOTE: ll orders are accepted on the basis of prices in effect at the time of shipment. On orders recieved for cartoned items in less than carton (not container) quantities, we reserve the right to adjust to the next carton quantity above the number of pieces shown on the order. NOTICE: To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. GENERL Upc numbers and SPIN commodity identification numbers are available upon request. To obtain current ISO certifications, listings, and other approvals, visit nvil s Web site at www.anvilintl.com. pricing is subject to change without notice. Go to nvil s Web site for the most current list price information, or contact your local nvil representative. LOSS OR DMGE CLIMS: ll goods are shipped at buyer s risk. Shipments should be carefully examined upon delivery and before the carrier s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods. NTIONL TOLL FREE HOTLINE 800-661-8998 www.anvilintl.com
nvil-strut Price List Sheet # S-3.11C 1. CONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Seller s products. No waiver, alteration or modification of these terms and conditions whether on Buyer s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller. 2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on Seller s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no backcharge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay. 3. WRRNTY: Seller warrants for one year from the date of shipment Seller s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller examination shall disclose to its satisfaction that the products are defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price of the defective products only and no allowance will be made for labor or expense of repairing or replacing defective products or workmanship of damage resulting from the same. Seller warrants the products which it sells of other manufacturers to the extent of the warranties of their respective makers. Where engineering design or fabrication work is supplied. Buyer s acceptance of Seller s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller s product warranty. THIS IS SELLER S SOLE WRRNTY. SELLER MKES NO OTHER WRRNTY OF NY KIND, EXPRESSED OR IMPLIED ND LL IMPLIED WRRNTIES OF MERCHNTBILITY ND FOR PRTICULR PURPOSE WHICH EXCEED SELLER S FORESTTED OBLIGTION RE HEREBY DISCLIMED BY SELLER ND EXCLUDED FROM THIS WRRNTY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or products. This warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller s factory, in any manner: (b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives. 4. SELLER S LIBILITY: Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under Warranty above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer. 5. RETURNS: Seller cannot accept return of any products unless its written permission has been first obtained, in which case same will be credited subject to the following (a) ll material returned must, on its arrival at Seller s Plant, be found to be in first-class condition; if not, cost of putting in saleable condition will be deducted from credit memoranda; (b) handling charge deduction of twenty-five percent (25%) will be made from all credit memoranda issued for material returned; (c) Transportation charges, if not prepaid will be deducted from credit memoranda. 6. SHIPMENTS: ll products sent out will be carefully examined, counted and packed. The cost of any special packing or special handling caused by Buyer s requirements or requests shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment. Claims for products damaged or lost in transit should be made on the carrier, as Seller s responsibility ceases, and title passes, on delivery to the carrier. 7. SPECIL PRODUCTS: Orders covering special or nonstandard products are not subject to cancellation except on such terms as Seller may specify on application. 8. PRICES ND DESIGNS: Prices and designs are subject to change without notice. ll prices are F.O.B. Point of shipment, unless otherwise stated. 9. TXES: The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be paid by Buyer unless Buyer provides Seller with an exemption certificate acceptance to the taxing authorities. 10. NUCLER PLNTS: Where the products, engineering design or fabrication is for nuclear plant applications. Buyer agrees (a) to take all necessary steps to add Seller as an insured under the merican Nuclear Insurers (NI) pool and under the Mutual tomic Energy Reinsurance Pool (MERP) for property damage and liability insurance and if necessary steps could have been taken, but are not taken, Buyer shall hold Seller harmless against all such losses which could have been thus covered (b) Buyer agrees to hold Seller harmless with respect to any personal injury (or death), property damage or other loss in a nuclear incident which is caused directly or indirectly by defective design, material, workmanship furnished by Seller (or which could be so covered but with respect to which Buyer has elected to self-insure), and further agrees to waive subrogation by its carriers of such insurance against Seller, and (c) as to nuclear hazards for which Buyer cannot obtain insurance coverage, the liability of Seller for any personal injury (or death), property damage or other loss directly caused by defective design, material, or workmanship furnished by Seller shall not exceed the value at the time of the loss occurrence. 11. MINIMUM INVOICE: Domestic: $100 plus transportation. International: $500 plus transportation. 12. TERMS: Cash, net 30 days unless otherwise specified. NOTE: ll orders are accepted on the basis of prices in effect at the time of shipment. NOTICE: The prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. FREIGHT LLOWNCE: ll prices quoted F.O.B. our Distribution Centre, Simcoe, Ontario; lberta; Quebec or freight equalized thereon; with full freight allowed on 1,000 lbs. or $1,500 to recognized delivery points in Canada. ll shipments will be made from the nearest distribution centre via the least expensive mode, unless otherwise instructed. Whenever a buyer selects a more expensive method for shipment, or alternate distribution centre, the difference in transportation costs will be for the buyer s account. 2 www.anvilintl.com Revised:
Table of Contents Terms and Conditions...2 Pictorial Index... 4 13 Channels... 14 18 Channel Nuts & Hardware... 18 22 Fittings... 23 42 Pipe and Conduit Supports... 43 51 Klo-Shure... 52 54 Concrete Inserts... 55 56 Specialty Strut... 57 63 Index... 64 67 CODE PRODUCT CODES PRODUCT CTEGORY Channels 1100S, 1200S, 619, Cushion Clamps, SNS, SRS B C D E F Other Pipe Clamps Channel Nuts General Fittings Hardware Concrete Inserts Klo-Shure TO OUR VLUED CUSTOMERS nvil-strut products are carefully designed and manufactured to the listed STD.s, as applicable. However, nvil-strut reserves the right to revise product design without notification. nvil-strut products included in this catalog are intended for installation and service only as described or specified herein. Care should be exercised by installers and end-users to install, use and maintain these products properly to avoid any possible on-the-job accidents. Prices subject to change without notice.
Pictorial Index nvil-strut Price List Sheet # S-3.11C CHNNELS S 100 Channel Size: 1⁵/₈" x 3¹/₄" x 12 G. S 100EH Channel with Elongated Holes Size: 1⁵/₈" x 3¹/₄" x 12 G. ⁹/₁₆" x 1¹/₈" Elongated Holes on 2" Centers. S 100KO Channel with Knock Outs Size: 1⁵/₈" x 3¹/₄" x 12 G. ⁷/₈" Knock Outs on 6" Centers. S 100H Channel with Holes Size: 1⁵/₈" x 3¹/₄" x 12 G. ⁹/₁₆" Holes on 1⁷/₈" Centers. S 100S Channel with Long Slots Size: 1⁵/₈" x 3¹/₄" x 12 G. ¹³/₃₂" x 3" Slots on 4" Centers S 100BTB Welded Channel Size: 1⁵/₈" x 6¹/₂" x 12 G. Two Pcs. S 100 Welded Back-to-Back. Page 14 Page 14 Page 14 Page 14 Page 14 Page 14 S 150 Channel Size: 1⁵/₈" x 2 ⁷/₁₆" x 12 G. S 150EH Channel with Elongated Holes Size: 1⁵/₈" x 2 ⁷/₁₆" x 12 G. ⁹/₁₆" x 1¹/₈" Elongated Holes on 2" Centers. S 150KO Channel with Knock Outs Size: 1⁵/₈" x 2 ⁷/₁₆" x 12 G. ⁷/₈" Knock Outs on 6" Centers. S 150H Channel with Holes Size: 1⁵/₈" x 2 ⁷/₁₆" x 12 G. ⁹/₁₆" Holes on 1⁷/₈" Centers. S 150S Channel with Long Slots Size: 1⁵/₈" x 2 ⁷/₁₆" x 12 G. ¹³/₃₂" x 3" Slots on 4" Centers S 150BTB Welded Channel Size: 1⁵/₈" x 4⁷/₈" x 12 G. Two Pcs. S 150 Welded Back-to-Back. Page 14 Page 14 Page 14 Page 14 Page 14 Page 14 S 200 Channel Size: 1⁵/₈" x 1⁵/₈" x 12 G. S 200EH Channel with Elongated Holes Size: 1⁵/₈" x 1⁵/₈" x 12 G. ⁹/₁₆" x 1¹/₈" Elongated Holes on 2" Centers. S 200KO Channel with Knock Outs Size: 1⁵/₈" x 1⁵/₈" x 12 G. ⁷/₈" Knock Outs on 6" Centers. S 200H Channel with Holes Size: 1⁵/₈" x 1⁵/₈" x 12 G. ⁹/₁₆" Holes on 1⁷/₈" Centers. S 200S Channel with Long Slots Size: 1⁵/₈" x 1⁵/₈" x 12 G. ¹³/₃₂" x 3" Slots on 4" Centers S 200H3 Channel with Holes on all Three Sides Size: 1⁵/₈" x 1⁵/₈" x 12 G. ⁹/₁₆" Holes on all three sides are on 1⁷/₈" Centers. Page 15 Page 15 Page 15 Page 15 Page 15 Page 15 S 200BTB Welded Channel Size: 1⁵/₈" x 3 ¹/₄" x 12 G. Two Pcs. S 200 Welded Back-to-Back. S 200STS Welded Channel Size: 1⁵/₈" x 3 ¹/₄" x 12 G. Two Pcs. S 200 Welded Back-to-Back. S 200BTS Welded Channel Size: 1⁵/₈" x 3 ¹/₄" x 12 G. Two Pcs. S 200 Welded Side-to-Back. S 200STSR Welded Channel Size: 1⁵/₈" x 3 ¹/₄" x 12 G. Two Pcs. S 200 Welded Side-to-Opposite Side. S 200BTBS Welded Channel Size: 1⁵/₈" x 3 ¹/₄" x 12 G. Three Pcs. S 200 Welded Side-to-Side. S 200BTBF3 Welded Channel Size: 1⁵/₈" x 4⁷/₈" x 12 G. Three Pcs. S 200 Welded. Page 15 Page 15 Page 15 Page 15 Page 15 Page 15 4 S 210 Channel Size: 1⁵/₈" x 1⁵/₈" x 14 G. S 210EH Channel with Elongated Holes Size: 1⁵/₈" x 1⁵/₈" x 14 G. ⁹/₁₆" x 1¹/₈" Elongated Holes on 2" Centers. S 210KO Channel with Knock Outs Size: 1⁵/₈" x 1⁵/₈" x 14 G. ⁷/₈" Knock Outs on 6" Centers. www.anvilintl.com S 210H Channel with Holes Size: 1⁵/₈" x 1⁵/₈" x 14 G. ⁹/₁₆" Holes on 1⁷/₈" Centers. S 210S Channel with Long Slots Size: 1⁵/₈" x 1⁵/₈" x 14 G. ¹³/₃₂" x 3" Slots on 4" Centers S 210BTB Welded Channel Size: 1⁵/₈" x 3¹/₄" x 14 G. Two Pcs. S 210 Welded Back-to-Back. Page 16 Page 16 Page 16 Page 16 Page 16 Page 16 Revised:
nvil-strut Price List Sheet # S-3.11C CHNNELS (continued) S 300 Channel Size: 1⁵/₈" x 1³/₈" x 12 G. S 300EH Channel with Elongated Holes Size: 1⁵/₈" x 1³/₈" x 12 G. ⁹/₁₆" x 1¹/₈" Elongated Holes on 2" Centers. S 300KO Channel with Knock Outs Size: 1⁵/₈" x 1³/₈" x 12 G. ⁷/₈" Knock Outs on 6" Centers. S 300H Channel with Holes Size: 1⁵/₈" x 1³/₈" x 12 G. ⁹/₁₆" Holes on 1⁷/₈" Centers. S 300S Channel with Long Slots Size: 1⁵/₈" x 1³/₈" x 12 G. ¹³/₃₂" x 3" Slots on 4" Centers S 300BTB Welded Channel Size: 1⁵/₈" x 2 ³/₄" x 12 G. Two Pcs. S 300 Welded Back-to-Back. Page 16 Page 16 Page 16 Page 16 Page 16 Page 16 S 400 Channel Size: 1⁵/₈" x 1" x 12 G. S 400EH Channel with Elongated Holes Size: 1⁵/₈" x 1" x 12 G. ⁹/₁₆" x 1¹/₈" Elongated Holes on 2" Centers. S 400KO Channel with Knock Outs Size: 1⁵/₈" x 1" x 12 G. ⁷/₈" Knock Outs on 6" Centers. S 400H Channel with Holes Size: 1⁵/₈" x 1" x 12 G. ⁹/₁₆" Holes on 1⁷/₈" Centers. S 400S Channel with Long Slots Size: 1⁵/₈" x 1" x 12 G. ¹³/₃₂" x 3" Slots on 4" Centers S 400BTB Welded Channel Size: 1⁵/₈" x 2" x 12 G. Two Pcs. S 400 Welded Back-to-Back. Page 17 Page 17 Page 17 Page 17 Page 17 Page 17 S 500 Channel Size: 1⁵/₈" x ¹³/₁₆" x 14 G. S 500EH Channel with Elongated Holes Size: 1⁵/₈" x ¹³/₁₆" x 14 G. ⁹/₁₆" x 1¹/₈" Elongated Holes on 2" Centers. S 500H Channel with Holes Size: 1⁵/₈" x ¹³/₁₆" x 14 G. ⁹/₁₆" Holes on 1⁷/₈" Centers. S 500S Channel with Long Slots Size: 1⁵/₈" x ¹³/₁₆" x 14 G. ¹³/₃₂" x 3" Slots on 4" Centers. S 500BTB Welded Channel Size: 1⁵/₈" x 1⁵/₈" x 14 G. Two Pcs. S 500 Welded Back-to-Back. Page 17 Page 17 Page 17 Page 17 Page 17 S 520 Channel Size: 1⁵/₈" x ¹³/₁₆" x 12 G. S 520EH Channel with Elongated Holes Size: 1⁵/₈" x ¹³/₁₆" x 12 G. ⁹/₁₆" x 1¹/₈" Elongated Holes on 2" Centers. S 520H Channel with Holes Size: 1⁵/₈" x ¹³/₁₆" x 12 G. ⁹/₁₆" Holes on 1⁷/₈" Centers. S 520S Channel with Long Slots Size: 1⁵/₈" x ¹³/₁₆" x 12 G. ¹³/₃₂" x 3" Slots on 4" Centers. S 520BTB Welded Channel Size: 1⁵/₈" x 1⁵/₈" x 12 G. Two Pcs. S 520 Welded Back-to-Back. Page 18 Page 18 Page 18 Page 18 Page 18 S 560 Channel Size: 1⁵/₈" x ¹³/₁₆" x 16 G. S 560EH Channel with Elongated Holes Size: 1⁵/₈" x ¹³/₁₆" x 16 G. ⁹/₁₆" x 1¹/₈" Elongated Holes on 2" Centers. S 707 Metal Raceway Closure Strip For all 1⁵/₈" Width Channels. (10' Length) S 707P Metal Painted Closure Strip For all 1⁵/₈" Width Channels. (10' Length) Page 18 Page 18 Page 18 Page 18 www.anvilintl.com Revised: 5
nvil-strut Price List Sheet # S-3.11C CHNNEL NUTS S NS Clamping Nut without Spring S SS Clamping Nut with Short Spring S RS Clamping Nut with Regular Spring Use with all 1⁵/₈" wide channel Use with S 400 and S 500 Use with S 200, S 210 and S 300 S LS Clamping Nut with Long Spring Use with S 100 & S 150 S TG Top Grip Nut with Spring on Top Use with all 1⁵/₈" wide channel S 517 Stud Nut with RS Spring Page 19 Page 19 Page 19 Page 19 Page 20 Page 20 CHNNEL HRDWRE S 3281 Double Conveyer djusting Nut Use with all 1⁵/₈" wide channel S 83 Hexagon Nut Fig. 135 Rod Coupling Fig. 146 Continuous Threaded Rod S 203 Linked Eyelet with Stud S 209 Flat Washer Page 20 Page 20 Page 21 Page 21 Page 21 Page 22 S 211 Lock Washer S 230 Fender Washer S 6075 Slotted Hex Head Machine Screw S 6108 Square Nut S 3500 Seismic Rod Stiffener S 6024 Hex Head Cap Screw Page 22 Page 22 Page 22 Page 22 Page 21 Page 22 CLMPS ND CCESSORIES S 85 Rod or Insulator Support Fig. 86 Clamp with Lock Nut Fig. 93 Top Beam "C" Clamp Size range ³/₈" - ¹/₂" Fig. 94 Top Beam "C" Clamp Size range ⁵/₈" - ³/₄" Fig. 95 Clamp with Lock Nut S 135X Light Duty Beam Clamp Page 23 Page 23 Page 23 Page 23 Page 23 Page 23 S 684 Beam Clamp S 685 Beam Clamp S 686 Beam Clamp S 855 ngular "C" Beam Clamp S 855 1 - Use with S 200 and S 210 S 855 2 - Use with S 500 S 858 Heavy Duty Suspension Rod Beam Clamp Safety nchor Strap S 871 sold separately S 865 Wide Throat Heavy Duty Beam Clamp Safety nchor Strap S 871 sold separately Page 27 Page 27 Page 27 Page 32 Page 32 Page 32 6 www.anvilintl.com Revised:
nvil-strut Price List Sheet # S-3.11C CLMPS & CCESSORIES (continued) S 871 Safety nchor Strap (For Heavy Duty Beam Clamps) S 907 "I" Beam Clamp S 998 "I" Beam Clamp S 2623 Swivel dapter Includes Cup Point Set Screw. Includes Set Screw. Use with S 2622 Beam Clamp S 2651 Beam Clamp S 2656 "U" Bolt Beam Clamp with Hook Page 32 Page 33 Page 35 Page 38 Page 39 Page 40 S 2657 Double "U" Bolt Beam Clamp Page 40 PLTES S 601 Two Hole Splice Plate S 602 Three Hole Splice Plate S 617 Three Hole Swivel Plate S 620 Two Hole Connecting Plate S 712 Cross Plate S 714 "T" Plate Page 23 Page 23 Page 24 Page 25 Page 28 Page 28 S 715 "T" Plate - 90 S 718 Flat ngle Plate S 719 Four Hole Corner Plate S 888 Four Hole Splice Plate S 619 Square Washer S 2504 Square Washer with Channel Guide Page 28 Page 28 Page 28 Page 32 Page 24 Page 36 SPLICE CLEVIS S 631 Two Hole Splice Clevis Fig. 644 Two Hole Splice Clevis Fig. 629 Three Hole Splice Clevis Fig. 645 Three Hole Splice Clevis Fig. 616 Four Hole Splice Clevis S 646 Four Hole Splice Clevis Use with S 200 & S 210 Use with S 500 & S 520 Use with S 200 & S 210 Use with S 500 & S 520 Use with S 200 & S 210 Use with S 500 Page 25 Page 25 Page 25 Page 25 Page 24 Page 25 "U" SUPPORTS S 613 "U" Support Use with S 200, S 210 and S 500BTB S 679 "U" Support Use with S 100, S 200BTB and S 210BTB S 710 "U" Support S 929 "U" Support S 978 "U" Support Use with S 300 Use with S 500 & S 520 Use with S 400 S 2119 "U" Connector Page 24 Page 27 Page 28 Page 34 Page 34 Page 35 www.anvilintl.com Revised: 7
nvil-strut Price List Sheet # S-3.11C "U" SUPPORTS (continued) S 2648 "U" Support S 687 Slotted "U" Support S 721 "U" Support S 678 Three Hole "U" Support S 733 Six Hole "U" Support S 735 Eight Hole "U" Support Use with S 150 Use with S 200 & S 210. IUse with S 100, S 200BTB and S 210BTB Use with S 150BTB Use with S 200 & S 210 Use with S 200BTB Page 39 Page 27 Page 28 Page 27 Page 29 Page 29 "Z" SUPPORTS S 609 Two Hole Offset "Z" Support S 611 "Z" Support Use with S 200, S 210 and S 500BTB S 612 "Z" Support S 711 "Z" Support S 928 "Z" Support S 2601 "Z" Support Use with S 400 Use with S 300 Use with S 500 & S 520 Use with S 150 Page 24 Page 24 Page 24 Page 28 Page 34 Page 38 NGLE FITTINGS & CONNECTORS S 603 Two Hole End ngle S 604 Two Hole Corner ngle S 624 Two Hole Closed ngle Connector S 633 Two Hole Open ngle Connector S 763, S 764 Slotted djustment Corner ngle S 806 Two Hole ngle with Impressions on Both Legs Page 23 Page 23 Page 25 Page 25 Page 29 Page 30 S 921 One Hole ngle S 2144 Corner ngle S 2520 Two Hole djustment ngle S 2545 Slotted 90 ngle Fig. 605 Three Hole Corner ngle S 606 Three Hole Corner ngle Page 33 Page 35 Page 37 Page 37 Page 23 Page 23 S 745 Three Hole Corner ngle S 3049 Two Hole Slotted 90 Corner Connector S 607 Four Hole Corner ngle S 781 Four Hole Open ngle Connector S 793 Four Hole Closed ngle Connector S 614 Four Hole Joint Corner Connector Page 29 Page 41 Page 23 Page 30 Page 30 Page 24 S 615 Four Hole Shelf Joint ngle Connector S 689 djustable Double Slotted Corner Connector S 748 Four Hole Corner Joint Connector S 927 Five Hole Corner Connector S 744 Flat Corner Connector S 750 Four Hole Corner Connector Page 24 Page 27 Page 29 Page 33 Page 29 Page 29 8 www.anvilintl.com Revised:
nvil-strut Price List Sheet # S-3.11C NGLE FITTINGS & CONNECTORS (continued) S 2190 Flat Corner Connector S 747 Symmetrical Four Hole Connector S 854 Flat Connector S 925 Symmetrical Three Hole Joint Connector S 2112 Cross Connector S 665 Four Hole Double Corner Connector Page 35 Page 29 Page 32 Page 33 Page 35 Page 26 S 720 RH & LH ngle Plate Connector S 922 RH & LH Two Hole Single Corner ngle Connector S 923 Five Hole Two ngle Connector S 2128 RH & LH Six Hole Corner Connector S 666 Six Hole Double Corner Connector S 821 Eight Hole Double ngle Connector Page 28 Page 33 Page 33 Page 35 Page 26 Page 31 S 667 Eight Hole Double Corner Connector S 913 Ten Hole Two ngle Clevis Connector S 668 Six Hole Three ngle Connector S 669 Twelve Hole Three ngle Clevis Connector S 2560, S 2561 Conduit Connector Fitting ssembly S 3060 Offset Connector Page 26 Page 33 Page 26 Page 26 Page 37 Page 41 S 9402 Two Hole Hinge Connector S 9403 Three Hole Hinge Connector S 9404 Four Hole Hinge Connector S 677 Cup Support for Standard Single Strut Use with S 200 and S 210 S 993 Inside Clevis S 2401 thru S 2403 Ladder Rung Page 42 Page 42 Page 42 Page 27 Page 34 Page 36 BRCKETS S 651 Reversible Strut Bracket S 661 T1 Strut Bracket (Slot Up) S 661 T2 Strut Bracket (Slot Down) S 708 Single Channel Bracket Support Use with S 200, S 210 and S 500BTB S 732 Shelf Bracket S 809 Double Channel Bracket Page 25 Page 26 Page 26 Page 28 Page 28 Page 31 S 825 RH/LH Pipe xle Support S 838 RH/LH 6" thru 30" Shelf Bracket S 926 Strut Brace S 2404 thru S 2408 Wall Ladder Bracket S 2421 45 Stair Tread Support S 2422 34½ Stair Tread Support Page 31 Page 31 Page 33 Page 36 Page 36 Page 36 www.anvilintl.com Revised: 9
nvil-strut Price List Sheet # S-3.11C BRCKETS (continued) S 3164 Double Channel Bracket Support S 3373 Universal ngle Bracket S 2627 Spacer Clevis S 2654 & S 2654 Column ttachment Page 41 Page 41 Page 38 Page 39 POST BSES S 2064 Double Column Post Base Use with S 100, S 200BTB, S 200STS, S 200BTS and S 200STR Channel S 3013 Single Column Post Base Use with S 200 and S 210 Channel S 3025 Post Base Use with S 200 and S 210 Channel S 3029 Double Column Post Base Use with all 3 1 / 4 " Channels S 3033 Post Base Use with S 200 and S 210 Channel S 3040 Post Base Use with S 200 and S 210 Channel Page 35 Page 40 Page 40 Page 40 Page 40 Page 40 S 3064 Double Column Post Base Use with all 3¼" Channels S 3064 SQ Double Column Post Base Use with all 3¼" Channels S 9400 djustable Base Page 41 Page 41 Page 42 TROLLEYS & CCESSORIES DISCONTINUED DISCONTINUED S 2521 Two Wheel Trolley Use with s 200 Channel S 2522 Four Wheel Trolley Use with S 200 Channel S 2524 Two Wheel Light Duty Trolley S 2525 Four Wheel Light Duty Trolley Use with S 200 and S 210 Channel. S 2528 Trolley Beam Standard Support Use with S 200 and S 210 Channel S 2528-1 Trolley Beam Standard Support Page 37 Page 37 Page 37 Page 37 PIPE & CONDUIT SUPPORTS S 51 Right ngle Pipe or Conduit Clamp Fig. 67 Pipe or Conduit Hanger Fig. 69 Swivel Ring Hanger Fig. 137 "U" Bolt with Nuts Long Tangent S 270 Conduit Clamp S 1450 One Hole Clamp for O.D. Tubing Page 43 Page 43 Page 43 Page 43 Page 43 Page 47 10 www.anvilintl.com Revised:
nvil-strut Price List Sheet # S-3.11C PIPE & CONDUIT SUPPORTS (continued) S 3101 thru S 3115 One Piece Cable and Conduit Clamp S 3126 Hold Down Clamp S 1000 EMT Conduit Clamps S 1100 Rigid Steel Conduit Clamps S 1200 O.D. O.D. Tubing Clamp S 1300 Universal Pipe Clamp Now only offered in Pre-ssembled Now only offered in Pre-ssembled Now only offered in Pre-ssembled Now only offered in Pre-ssembled Page 48 Page 49 Page 44 Page 45 Page 45 & 46 Page 47 S 815 (6" to 18" Pipe) Double Roller Pipe Support S 1901 (1" to 8" Pipe) Pipe Roller Support S 1902 Pipe Roller Support S 1911 Pipe Roller Support S 2631 Swing Gate Fixture Hanger Use with S 200, S 210, S 300, S 400 and S 500 Channels S 2631D Swing Gate Fixture Hanger Use with S 100, S 150, S 200BTB and S 210BTB Channels Page 44 Page 48 Page 48 Page 48 Page 39 Page 39 DISCONTINUED S 3138 Parallel Pipe Clamp S 3792 Cushion Strip S 004 OD thru S 106P Cushion Clamp ssembly Klo-Shure Insulation Coupling Clevis Hanger/Ring Hanger Klo-Shure Strut Mounted Insulation Couplings with Strut Clamp Klo-Shure Strut Mounted Insulation Couplings w/ non Metallic Strut Clamp Page 49 Page 50 Pages 50 & 51 Pages 52 & 53 Page 54 CONCRETE INSERTS DISCONTINUED Fig. 152 Screw Concrete Insert Fig. 284 Concrete Deck Inserty Fig. 285 Light Concrete Insert S 349 Continuous Concrete Insert with or without Closure Strip and End Cap Installed S 449 Continuous Concrete Insert with or without Closure Strip and End Cap Installed S 6151 Plastic Closure Strip Page 55 Page 55 Page 55 Page 55 Page 55 Page 56 END CPS S 653 Type "B" End Cap nchor Use with S 349 Insert S 654 Type "B" End Cap nchor Use with S 449 Insert S 655, S 656 Type "" End Cap Use with S 200 Channel. Use with S 300 Channel and S 349 Insert S 901, S 902 Type "" End Cap Use with S 100 and S 400 Channel S 930 Type "" End Cap Use with S 500 Channel Page 56 Page 56 Page 26 Page 33 Page 34 www.anvilintl.com Revised: 11
nvil-strut Price List Sheet # S-3.11C END CPS (continued) S 2511 End Cap with Knockout S 6153 Safety End Cap S 2511 1 Use with S 100. S 2511 2 Use with S 200 and S 210. S 2511 3 Use with S 300 S 6153 1 Use with S 100. S 6153 2 Use with S 200 and S 210. S 6153 3 Use with S 300. S 6153 5 Use with S 500 Page 36 Page 42 SPECILTY STRUT (Stainless Steel Zinc Trivalent Chromium Hot Dipped Galvanized) S 200 SS/ZTC/HG Channel Size: 1⁵/₈" x 1⁵/₈" x 12 G S 200EH SS/ZTC/HG Channel with Elongated Holes Size: 1⁵/₈" x 1⁵/₈" x 12 G. ⁹/₁₆" x 1¹/₈" Elongated Holes on 2" Centers S 200BTB SS/ZTC/HG Welded Channel Size: 1⁵/₈" x 3¹/₄" x 12 G. Two Pcs. S 200 Welded Back-to-Back. S 200BTB EH SS/ZTC/HG Welded Channel Size: 1⁵/₈" x 3¹/₄" x 12 G. Two Pcs. S 200EH Welded Back-to-Back. ⁹/₁₆" x 1¹/₈" Elongated Holes on 2" Centers S 210 SS/ZTC/HG Channel Size: 1⁵/₈" x 1⁵/₈" x 14 G S 210EH SS/ZTC/HG Channel with Elongated Holes Size: 1⁵/₈" x 1⁵/₈" x 14 G. ⁹/₁₆" x 1¹/₈" Elongated Holes on 2" Centers Page 57 Page 57 Page 57 Page 57 Page 57 Page 57 S 210BTB SS/ZTC/HG Welded Channelp Size: 1⁵/₈" x 3¹/₄" x 14 G. Two Pcs. S 210 Welded Back-to-Back S 500 SS/ZTC/HG Channel Size: 1⁵/₈" x 1¹³/₁₆" x 14 G S 500EH SS/ZTC/HG Channel with Elongated Holes Size: 1⁵/₈" x ¹³/₁₆" x 14 G. ⁹/₁₆" x 1¹/₈" Elongated Holes on 2" Centers S 500BTB SS/ZTC/HG Welded Channel Size: 1⁵/₈" x 1⁵/₈" x 14 G. Two Pcs. S 500 Welded Back-to-Back. Page 57 Page 57 Page 57 Page 57 S NS SS/ZTC Clamping Nut without Spring S RS SS/ZTC Clamping Nut with Regular Spring S 3500 ZTC Seismic Rod Stiffener S 619 SS/ZTC Square Washer S 601 ZTC Two Hole Splice Plate S 602 ZTC Three Hole Splice Plate Use with all 1⁵/₈" wide channel Use with S 200, S 210 and S 300 Page 58 Page 58 Page 63 Page 59 Page 58 Page 58 S 712 ZTC Cross Plate S 714 ZTC "T" Plate S 718 ZTC Flat ngle Plate S 888 ZTC Four Hole Splice Plate S 616 ZTC Four Hole Splice Clevis Use with S 200 & S 210 S 613 ZTC "U" Support Use with S 200, S 210 and S 500BTB Page 60 Page 60 Page 60 Page 60 Page 58 Page 58 12 www.anvilintl.com Revised:
nvil-strut Price List Sheet # S-3.11C SPECILTY STRUT (Stainless Steel Zinc Trivalent Chromium Hot Dipped Galvanized) continued S 679 ZTC "U" Support S 929 ZTC "U" Support S 611 ZTC "Z" Support S 928 ZTC "Z" Support S 603 ZTC Two Hole End ngle S 604 ZTC Two Hole Corner ngle Use with S 100, S 200BTB and S 210BTB Use with S 500 & S 520 Use with S 200, S 210 and S 500BTB Use with S 500 & S 520 Page 60 Page 60 Page 58 Page 60 Page 58 Page 58 S 624 ZTC Two Hole Closed ngle Connector S 633 ZTC Two Hole Open ngle Connector S 605 ZTC Three Hole Corner ngle S 606 ZTC Three Hole Corner ngle S 607 ZTC Four Hole Corner ngle S 720 ZTC RH & LH ngle Plate Connector Page 59 Page 59 Page 58 Page 58 Page 58 Page 60 S 922 RH & LH ZTC Two Hole Single Corner ngle Connector S 665 ZTC Four Hole Double Corner Connector S 923 ZTC Five Hole Two ngle Connector S 666 ZTC Six Hole Double Corner Connector S 821 ZTC Eight Hole Double ngle Connector S 667 ZTC Eight Hole Double Corner Connector Page 60 Page 60 Page 60 Page 60 Page 60 Page 60 S 913 ZTC Ten Hole Two ngle Clevis Connector S 668 ZTC Six Hole Three ngle Connector S 669 ZTC Twelve Hole Three ngle Clevis Connector S 651 ZTC Reversible Strut Bracket S 809 ZTC Double Channel Bracket S 3373 ZTC Universal ngle Bracket Page 60 Page 60 Page 60 Page 59 Page 60 Page 63 S 3033 ZTC Post Base Use with S 200 and S 210 Channel S 3064 ZTC Double Column Post Base Use with all 3¹/₄" Channels S 2651 ZTC Beam Clamp S 1100 SS/ZTC Rigid Steel Conduit Clamps Now only offered in Pre-ssembled S 1200 SS/ZTC O.D. Tubing Clamp Now only offered in Pre-ssembled Page 63 Page 63 Page 63 Page 61 Page 62 www.anvilintl.com Revised: 13
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C S 100 Channel S 100 Part No. Description S 100S channel Std. Pkg. in Ft. Per 100 Feet PL GR PG S 100 10 Channel 300 305.00 $2,718.00 $2,718.00 $2,257.00 S 100 20 Channel 600 305.00 $2,718.00 $2,718.00 $2,257.00 S 100EH 10 S 100EH 20 S 100H 10 S 100H 20 S 100S 10 S 100S 20 S 100KO 10 S 100KO 20 Channel w/elongated Holes Channel w/elongated Holes Channel w/holes Channel w/holes Channel w/long Slots Channel w/long Slots Channel w/knock Out Channel w/knock Out 9 16" x 1 1 8" Elongated Holes on 2" Centers 300 300.00 $2,257.00 $2,355.00 $2,257.00 9 16" x 1 1 8" Elongated Holes on 2" Centers 600 300.00 $2,257.00 $2,355.00 $2,257.00 9 16" Holes on 1 7 8" Centers 300 300.00 $2,453.00 $2,453.00 $2,453.00 9 16" Holes on 1 7 8" Centers 600 300.00 $2,453.00 $2,453.00 $2,453.00 13 32" x 3" Slots on 4" Centers 300 300.00 $2,816.00 $3,185.00 $2,781.00 13 32" x 3" Slots on 4" Centers 600 300.00 $2,816.00 $3,185.00 $2,781.00 7 8" Knock Out on 6" Centers 300 305.00 $2,816.00 $3,185.00 $2,781.00 7 8" Knock Out on 6" Centers 600 305.00 $2,816.00 $3,185.00 $2,781.00 S 100BTB 10 Welded Channel (1) Two pieces S 100 Welded Back to Back 150 610.00 $5,345.00 $5,993.00 $5,723.00 S 100BTB 20 Welded Channel (1) Two pieces S 100 Welded Back to Back 200 610.00 $5,345.00 $5,993.00 $5,723.00 S 150 Channel S 150 Part No. Description Std. Pkg. in Ft. Per 100 Feet PL GR PG S 150 10 Channel 400 247.00 $1,717.00 $1,815.00 $1,717.00 S 150 20 Channel 800 247.00 $1,717.00 $1,815.00 $1,717.00 S 150EH 10 S 150EH 20 S 150H 10 S 150H 20 S 150S 10 S 150S 20 S 150KO 10 S 150KO 20 S 100EH S 150EH S 100H S 150H Channel w/elongated Holes Channel w/elongated Holes Channel w/holes Channel w/holes Channel w/long Slots Channel w/long Slots Channel w/knock Out Channel w/knock Out S 150S S 100KO S 150KO S 100BTB S 150BTB 1 5 8" x 3 1 4" x 12 Ga. unless otherwise noted. (1) 1 5 8" x 6 1 2" x 12 Ga. 1 5 8" x 2 7 16" x 12 Ga. unless otherwise noted. (1) 1 5 8" x 4 7 8" x 12 Ga. 9 16" x 1 1 8" Elongated Holes on 2" Centers 400 242.00 $1,717.00 $1,815.00 $1,717.00 9 16" x 1 1 8" Elongated Holes on 2" Centers 800 242.00 $1,717.00 $1,815.00 $1,717.00 9 16" Holes on 1 7 8" Centers 400 242.00 $1,815.00 $1,815.00 $1,815.00 9 16" Holes on 1 7 8" Centers 800 242.00 $1,815.00 $1,815.00 $1,815.00 13 32" x 3" Slots on 4" Centers 400 242.00 $2,532.00 $2,781.00 $2,321.00 13 32" x 3" Slots on 4" Centers 800 242.00 $2,532.00 $2,781.00 $2,321.00 7 8" Knock Out on 6" Centers 400 247.00 $2,532.00 $2,781.00 $2,321.00 7 8" Knock Out on 6" Centers 800 247.00 $2,532.00 $2,781.00 $2,321.00 S 150BTB 10 Welded Channel (1) Two pieces S 150 Welded Back to Back 200 484.00 $3,926.00 $5,182.00 $4,319.00 S 150BTB 20 Welded Channel (1) Two pieces S 150 Welded Back to Back 400 484.00 $3,926.00 $5,182.00 $4,319.00 14 www.anvilintl.com
Price List...Sheet # S-3.11C S 200 Channel S 200 Part No. Description channel S 200BTS Std. Pkg. in Ft. Per 100 Feet PL GR PG S 200 10 Channel 500 190.00 $893.00 $893.00 $893.00 S 200 20 Channel 500 190.00 $893.00 $893.00 $893.00 S 200EH 10 Channel w/elongated Holes 9 16" x 1 1 8" Elongated Holes on 2" Centers 500 185.00 $893.00 $893.00 $893.00 S 200EH 20 Channel w/elongated Holes 9 16" x 1 1 8" Elongated Holes on 2" Centers 500 185.00 $893.00 $893.00 $893.00 S 200H 10 S 200H 20 S 200S 10 S 200S 20 S 200KO 10 S 200KO 20 Channel w/holes Channel w/holes Channel w/long Slots Channel w/long Slots Channel w/knock Out Channel w/knock Out 9 16" Holes on 1 7 8" Centers 500 186.00 $1,031.00 $1,031.00 $1,031.00 9 16" Holes on 1 7 8" Centers 500 186.00 $1,324.00 $1,031.00 $1,031.00 13 32" x 3" Slots on 4" Centers 500 185.00 $1,031.00 $1,031.00 $1,031.00 13 32" x 3" Slots on 4" Centers 500 185.00 $1,031.00 $1,031.00 $1,031.00 7 8" Knock Out on 6" Centers 500 190.00 $1,590.00 $1,590.00 $1,590.00 7 8" Knock Out on 6" Centers 500 190.00 $1,590.00 $1,590.00 $1,590.00 S 200BTB 10 Welded Channel (1) Two pieces S 200 Welded Back to Back 250 380.00 $2,110.00 $2,110.00 $2,110.00 S 200BTB 20 Welded Channel (1) Two pieces S 200 Welded Back to Back 300 380.00 $2,110.00 $2,110.00 $2,110.00 S 200BTS 10 Welded Back-to-Side Two pieces S 200 Welded Back to Side 250 380.00 $3,189.00 $3,435.00 $3,681.00 S 200BTS 20 Welded Back-to-Side Two pieces S 200 Welded Back to Side 300 380.00 $3,189.00 $4,161.00 $3,681.00 S 200STS 10 Welded Side-to-Side Two pieces S 200 Welded Side to Side 250 380.00 $3,189.00 $3,435.00 $3,878.00 S 200STS 20 Welded Side-to-Side Two pieces S 200 Welded Side to Side 300 380.00 $3,189.00 $3,435.00 $3,878.00 S 200STSR 10 S 200STSR 20 S 200EH S 200H Welded Side-to-Opposite Side Welded Side-to-Opposite Side S 200S S 200KO S 200BTB Two pieces S 200 Welded Side to Opposite Side Two pieces S 200 Welded Side to Opposite Side For Stainless Steel, Zinc Tri-valent Chromium and Hot Dipped Galvanized, refer to page 57 in the Specialty Strut Section. S 200STS S 200STSR 1 5 8" x 1 5 8" x 12 Ga. unless otherwise noted. (1) 1 5 8" x 3 1 4" x 12 Ga. unless otherwise noted. 250 380.00 $2,146.00 $3,435.00 $3,189.00 300 380.00 $2,146.00 $3,435.00 $3,189.00 Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel Technical Data Specialty Strut www.anvilintl.com 15
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C S 210 Channel S 210 Part No. S 300 Channel S 300 Part No. Description S 210H S 300H S 210S S 300S channel Std. Pkg. in Ft. Per 100 Feet PL GR PG S 300 10 Channel 500 170.00 $1,031.00 $1,031.00 $1,031.00 S 300 20 Channel 500 170.00 $1,031.00 $1,031.00 $1,031.00 S 300EH 10 S 300EH 20 S 300H 10 S 300H 20 S 300S 10 S 300S 20 S 300KO 10 S 300KO 20 Description S 300EH Channel w/elongated Holes Channel w/elongated Holes Channel w/holes Channel w/holes Channel w/long Slots Channel w/long Slots Channel w/knock Out Channel w/knock Out S 300KO S 300BTB 9 16" x 1 1 8" Elongated Holes on 2" Centers 500 165.00 $1,031.00 $1,031.00 $1,178.00 9 16" x 1 1 8" Elongated Holes on 2" Centers 500 165.00 $1,031.00 $1,031.00 $1,178.00 9 16" Holes on 1 7 8" Centers 500 165.00 $1,376.00 $1,705.00 $1,510.00 9 16" Holes on 1 7 8" Centers 500 165.00 $1,376.00 $1,705.00 $1,510.00 13 32" x 3" Slots on 4" Centers 500 165.00 $1,376.00 $1,705.00 $1,510.00 13 32" x 3" Slots on 4" Centers 500 165.00 $1,376.00 $1,705.00 $1,510.00 7 8" Knock Out on 6" Centers 500 170.00 $1,376.00 $1,760.00 $1,532.00 7 8" Knock Out on 6" Centers 500 170.00 $1,376.00 $1,760.00 $1,532.00 S 300BTB 10 Welded Channel (1) Two pieces S 300 Welded Back to Back 250 340.00 $2,617.00 $3,314.00 $2,969.00 S 300BTB 20 Welded Channel (1) Two pieces S 300 Welded Back to Back 300 340.00 $2,617.00 $3,314.00 $2,969.00 Std. Pkg. in Ft. Per 100 Feet PL GR PG S 210 10 Channel 500 141.00 $678.00 $716.00 $678.00 S 210 20 Channel 500 141.00 $678.00 $716.00 $678.00 S 210EH 10 Channel w/elongated Holes 9 16" x 1 1 8" Elongated Holes on 2" Centers 500 137.00 $678.00 $716.00 $678.00 S 210EH 20 Channel w/elongated Holes 9 16" x 1 1 8" Elongated Holes on 2" Centers 500 137.00 $678.00 $716.00 $678.00 S 210H 10 S 210H 20 S 210S 10 S 210S 20 S 210KO 10 S 210KO 20 S 210EH Channel w/holes Channel w/holes Channel w/long Slots Channel w/long Slots Channel w/knock Out Channel w/knock Out S 210KO S 210BTB 9 16" Holes on 1 7 8" Centers 500 137.00 $1,246.00 $1,246.00 $1,246.00 9 16" Holes on 1 7 8" Centers 500 137.00 $1,246.00 $1,246.00 $1,246.00 13 32" x 3" Slots on 4" Centers 500 137.00 $1,246.00 $1,246.00 $1,246.00 13 32" x 3" Slots on 4" Centers 500 137.00 $1,246.00 $1,246.00 $1,246.00 7 8" Knock Out on 6" Centers 500 141.00 $1,284.00 $1,673.00 $1,403.00 7 8" Knock Out on 6" Centers 500 141.00 $1,284.00 $1,673.00 $1,403.00 S 210BTB 10 Welded Channel (1) Two pieces S 210 Welded Back to Back 250 282.00 $2,699.00 $3,238.00 $2,807.00 S 210BTB 20 Welded Channel (1) Two pieces S 210 Welded Back to Back 300 282.00 $2,699.00 $3,238.00 $2,807.00 For Stainless Steel, Zinc Tri-valent Chromium and Hot Dipped Galvanized, refer to page 57 in the Specialty Strut Section. 1 5 8" x 1 5 8" x 14 Ga. unless otherwise noted. (1) 1 5 8" x 3 1 4" x 14 Ga. 1 5 8" x 1 3 8" x 12 Ga. unless otherwise noted. (1) 1 5 8" x 2 3 4" x 12 Ga. 16 www.anvilintl.com
Price List...Sheet # S-3.11C S 400 Channel S 400 Part No. S 400EH Description S 400H S 400S channel S 400KO S 400BTB Std. Pkg. in Ft. Per 100 Feet 1 5 8" x 1" x 12 Ga. unless otherwise noted. (1) 1 5 8" x 2" x 12 Ga. PL GR PG S 400 10 Channel 500 146.00 $835.00 $883.00 $835.00 S 400 20 Channel 500 146.00 $835.00 $883.00 $835.00 S 400EH 10 S 400EH 20 S 400H 10 S 400H 20 S 400S 10 S 400S 20 S 400KO 10 S 400KO 20 Channel w/elongated Holes Channel w/elongated Holes Channel w/holes Channel w/holes Channel w/long Slots Channel w/long Slots Channel w/knock Out Channel w/knock Out 9 16" x 1 1 8" Elongated Holes on 2" Centers 500 141.00 $835.00 $883.00 $835.00 9 16" x 1 1 8" Elongated Holes on 2" Centers 500 141.00 $835.00 $883.00 $835.00 9 16" Holes on 1 7 8" Centers 500 141.00 $1,241.00 $1,619.00 $1,295.00 9 16" Holes on 1 7 8" Centers 500 141.00 $1,241.00 $1,619.00 $1,295.00 13 32" x 3" Slots on 4" Centers 500 141.00 $1,241.00 $1,619.00 $1,295.00 13 32" x 3" Slots on 4" Centers 500 141.00 $1,241.00 $1,619.00 $1,295.00 7 8" Knock Out on 6" Centers 500 146.00 $1,268.00 $1,673.00 $1,430.00 7 8" Knock Out on 6" Centers 500 146.00 $1,268.00 $1,673.00 $1,430.00 S 400BTB 10 Welded Channel (1) Two pieces S 400 Welded Back to Back 250 292.00 $2,509.00 $3,238.00 $2,699.00 S 400BTB 20 Welded Channel (1) Two pieces S 400 Welded Back to Back 300 292.00 $2,509.00 $3,238.00 $2,699.00 Pipe/Conduit Supports Fittings Nuts & Hardware Channel Klo-Shure S 500 Channel S 500 S 500EH S 500H S 500S S 500BTB Part No. Description Std. Pkg. in Ft. Per 100 Feet PL GR PG S 500 10 Channel 500 97.00 $471.00 $530.00 $471.00 S 500 20 Channel 500 97.00 $471.00 $530.00 $471.00 S 500EH 10 Channel w/elongated Holes 9 16" x 1 1 8" Elongated Holes on 2" Centers 500 87.00 $471.00 $530.00 $471.00 S 500EH 20 Channel w/elongated Holes 9 16" x 1 1 8" Elongated Holes on 2" Centers 500 87.00 $471.00 $530.00 $471.00 S 500H 10 S 500H 20 S 500S 10 S 500S 20 Channel w/holes Channel w/holes Channel w/long Slots Channel w/long Slots 1 5 8" x 13 16" x 14 Ga. unless otherwise noted. (1) 1 5 8" x 1 5 8" x 14 Ga. 9 16" Holes on 1 7 8" Centers 500 87.00 $903.00 $903.00 $903.00 9 16" Holes on 1 7 8" Centers 500 87.00 $903.00 $903.00 $903.00 13 32" x 3" Slots on 4" Centers 500 87.00 $903.00 $903.00 $903.00 13 32" x 3" Slots on 4" Centers 500 87.00 $903.00 $903.00 $903.00 S 500BTB 10 Welded Channel (1) Two pieces S 500 Welded Back to Back 250 194.00 $2,159.00 $2,591.00 $2,159.00 S 500BTB 20 Welded Channel (1) Two pieces S 500 Welded Back to Back 300 194.00 $2,159.00 $2,591.00 $2,159.00 Concrete Inserts Specialty Strut Technical Data For Stainless Steel, Zinc Tri-valent Chromium and Hot Dipped Galvanized, refer to page 57 in the Specialty Strut Section. www.anvilintl.com 17
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C S 520 Channel S 520 S 520EH S 520H S 520S S 520BTB Part No. S 707 Raceway Closure Strip S 707 Part No. Description S 707P Description channel Std. Pkg. in Ft. Per 100 Feet GR PG GREY WHITE S 707 10 Metal Raceway Closure Strip 500 47.00 $560.00 $403.00 - - S 707P 10 Metal Painted Closure Strip 500 10.00 $167.00 - $167.00 $167.00 Std. Pkg. in Ft. Per 100 Feet PL GR PG S 520 10 Channel 500 128.00 $736.00 $785.00 $981.00 S 520 20 Channel 500 128.00 $736.00 $785.00 $736.00 S 520EH 10 S 520EH 20 S 520H 10 S 520H 20 S 520S 10 S 520S 20 Channel w/elongated Holes Channel w/elongated Holes Channel w/holes Channel w/holes Channel w/long Slots Channel w/long Slots 9 16" x 1 1 8" Elongated Holes on 2" Centers 500 123.00 $736.00 $785.00 $736.00 9 16" x 1 1 8" Elongated Holes on 2" Centers 500 123.00 $736.00 $785.00 $736.00 9 16" Holes on 1 7 8" Centers 500 123.00 $1,214.00 $1,593.00 $1,268.00 9 16" Holes on 1 7 8" Centers 500 123.00 $1,214.00 $1,593.00 $1,268.00 13 32" x 3" Slots on 4" Centers 500 118.00 $1,214.00 $1,593.00 $1,268.00 13 32" x 3" Slots on 4" Centers 500 118.00 $1,214.00 $1,593.00 $1,268.00 S 520BTB 10 Welded Channel (1) Two pieces S 520 Welded Back to Back 250 256.00 $2,375.00 $3,212.00 $2,591.00 S 520BTB 20 Welded Channel (1) Two pieces S 520 Welded Back to Back 300 256.00 $2,375.00 $3,212.00 $2,591.00 S 560 Channel S 560 Part No. Description Std. Pkg. in Ft. Per 100 Feet 1 5 8" x 13 16" x 12 Ga. unless otherwise noted. (1) 1 5 8" x 1 5 8" x 12 Ga. PL GR PG S 560 10 Channel 500 82.00 $656.00 $713.00 $638.00 S 560 20 Channel 500 82.00 $656.00 $713.00 $638.00 S 560EH 10 S 560EH 20 S 560EH Channel w/elongated Holes Channel w/elongated Holes 1 5 8" x 13 16" x 16 Ga. unless otherwise noted. 9 16" x 1 1 8" Elongated Holes on 2" Centers 500 79.00 $779.00 $848.00 $638.00 9 16" x 1 1 8" Elongated Holes on 2" Centers 500 79.00 $779.00 $848.00 $638.00 For all 1 5 8" Width Channels (10' Length) 18 www.anvilintl.com
Price List...Sheet # S-3.11C clamping Nuts S LS S NS S RS S SS Description Part No. Size Std. Pkg. channel nuts & hardware Clamping Nut with Long Spring (1) S LS 1 4" x 20 50 7.00 $439.00 C Clamping Nut with Long Spring (1) S LS 3 8" x 16 50 10.00 $476.00 C Clamping Nut with Long Spring (1) S LS 1 2" x 13 50 12.00 $506.00 C Clamping Nut with Long Spring (1) S LS 5 8" x 11 50 15.00 $714.00 C Clamping Nut with Long Spring (1) S LS 3 4" x 10 50 14.00 $839.00 C Clamping Nut without Spring (4) S NS #10 x 24 100 7.00 $326.00 Clamping Nut without Spring (4) S NS 1 4" x 20 100 6.00 $128.00 Clamping Nut without Spring (4) S NS 5 16" 18 100 6.00 $265.00 Clamping Nut without Spring (4) S NS 3 8" x 16 100 9.00 $157.00 Clamping Nut without Spring (4) S NS 1 2" x 13 100 11.00 $216.00 Clamping Nut without Spring (4) S NS 5 8" x 11 100 15.00 $295.00 Clamping Nut without Spring (4) S NS 3 4" x 10 100 13.00 $579.00 Clamping Nut without Spring (4) S NS 7 8" x 10 100 14.00 $716.00 Clamping Nut without Spring (4) S NS 1 2" x 13 100 14.00 $216.00 Clamping Nut without Spring (4) S NS 5 8" x 11 100 14.00 $396.00 Clamping Nut without Spring (4) S NS 3 4" x 10 100 8.00 $506.00 Clamping Nut with Regular Spring (2) S RS #8 x 32 100 7.00 $453.00 Clamping Nut with Regular Spring (2) S RS #10 x 24 100 7.00 $406.00 Clamping Nut with Regular Spring (2) S RS #10 x 32 100 7.00 $429.00 Clamping Nut with Regular Spring (2) S RS 1 4" x 20 100 7.00 $138.00 Clamping Nut with Regular Spring (2) S RS 5 16" 18 100 7.00 $353.00 Clamping Nut with Regular Spring (2) S RS 3 8" x 16 100 10.00 $167.00 Clamping Nut with Regular Spring (2) S RS 1 2" x 13 100 12.00 $216.00 Clamping Nut with Regular Spring (2) S RS 5 8" x 11 100 16.00 $314.00 Clamping Nut with Regular Spring (2) S RS 3 4" x 10 100 14.00 $736.00 Clamping Nut with Regular Spring (2) S RS 7 8" x 9 100 14.00 $1,284.00 Clamping Nut with Short Spring (3) S SS #8 x 32 100 7.00 $378.00 C Clamping Nut with Short Spring (3) S SS #10 x 24 100 7.00 $378.00 C Clamping Nut with Short Spring (3) S SS #10 x 32 100 7.00 $1,037.00 C Clamping Nut with Short Spring (3) S SS 1 4" x 20 100 7.00 $177.00 C Clamping Nut with Short Spring (3) S SS 5 16" 18 100 7.00 $393.00 C Clamping Nut with Short Spring (3) S SS 3 8" x 16 100 10.00 $186.00 C Clamping Nut with Short Spring (3) S SS 1 2" x 13 100 9.00 $196.00 C Clamping Nut with Short Spring (3) S SS 5 8" x 11 100 12.00 $618.00 C Sold in full box only. For Stainless Steel and Zinc Tri-valent Chromium, refer to page 58 in the Specialty Strut Section. (1) Use with S 100 and S 150 Channel. (2) Use with S 200, S 210 and S 300 Channel. (3) Use with S 400 and S 500 Channel. (4) Use with all 1 5 8" Wide Channels. EG Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel www.anvilintl.com 19
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C Nuts S TG Hexagon Nut S 83 S 517 Description Part No. Size Std. Pkg. Description Part No. Size Std. Pkg. channel nuts & hardware Top Grip Nut with Spring on Top (1) S TG 1 4" x 20 100 7.00 $343.00 C Top Grip Nut with Spring on Top (1) S TG 3 8" x 16 100 10.00 $413.00 C Top Grip Nut with Spring on Top (1) S TG 1 2" x 13 100 8.00 $422.00 C Top Grip Nut with Spring on Top (1) S TG 5 16" x 18 100 6.00 $422.00 C Stud Nut with RS Spring S 517 1 4" x 1" 100 8.00 $746.00 C Stud Nut with RS Spring S 517 1 4" x 1 1 4" 100 8.00 $756.00 C Stud Nut with RS Spring S 517 1 4" x 1 1 2" 100 9.00 $776.00 C Stud Nut with RS Spring S 517 1 4" x 2" 100 9.00 $815.00 C Stud Nut with RS Spring S 517 3 8" x 1" 100 13.00 $943.00 C Stud Nut with RS Spring S 517 3 8" x 1 1 4" 100 14.00 $963.00 C Stud Nut with RS Spring S 517 3 8" x 1 1 2" 100 14.00 $1,001.00 C Stud Nut with RS Spring S 517 3 8" x 2" 100 15.00 $1,021.00 C Stud Nut with RS Spring S 517 1 2" x 1" 100 15.00 $1,148.00 C Stud Nut with RS Spring S 517 1 2" x 1 1 4" 100 16.00 $1,168.00 C Stud Nut with RS Spring S 517 1 2" x 1 1 2" 100 17.00 $1,178.00 C Stud Nut with RS Spring S 517 1 2" x 2" 100 19.00 $1,227.00 C Double Conveyor djusting Nut (1) S 3281 3 8" 50 17.00 $1,178.00 C Sold in full box only. (1) Use with all 1 5 8" Channel. Hexagon Nut S 83 1 4" 500 - $23.00 D Hexagon Nut S 83 3 8" 500 - $37.00 D Hexagon Nut S 83 1 2" 100 4.00 $45.00 D Hexagon Nut S 83 5 8" 50 7.00 $103.00 D Hexagon Nut S 83 3 4" 50 12.00 $177.00 D Sold in full box only. S 3281 EG EG 20 www.anvilintl.com
Price List...Sheet # S-3.11C Rods Fig. 135 Fig. 146 Description Part No. Size Rod Coupling Fig. 135 Continuous Threaded Rod Fig. 146 channel nuts & hardware Load Rating Std. Pkg. For prices, see nvil International Pipe Hanger List Price Sheet For prices, see nvil International ll Thread Rod Price Sheet EG Channel Nuts & Hardware Fittings Linked Eyelet with Stud S 203 Description Part No. Size Seismic Rod Stiffener S 3500 Description Part No. Size Std. Pkg. Seismic Rod Stiffener S 3500 3 8" 5 8" 25 16.00 $1,717.00 C Max Load Std. Pkg. Linked Eyelet with Stud S 203 3 8" 610 100 27.00 $3,249.00 D Linked Eyelet with Stud S 203 1 2" 610 50 45.00 $3,416.00 D Sold in full box only. For Zinc Tri-valent Chromium, refer to page 63 in the Specialty Strut Section. EG EG Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Technical Data www.anvilintl.com 21
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C Washers, Screws and Nuts S 209 S 211 S 230 S 6075 S 6108 S 6024 Description Part No. Size Std. Pkg. channel nuts & hardware Flat Washer S 209 1 4" 200 - $19.00 D Flat Washer S 209 3 8" 100 2.00 $30.00 D Flat Washer S 209 1 2" 100 4.00 $57.00 D Flat Washer S 209 5 8 100 8.00 $91.00 D Flat Washer S 209 3 4 100 11.00 $157.00 D Lock Washer S 211 1 4" 100 50.00 $26.00 D Lock Washer S 211 3 8" 100 100.00 $30.00 D Lock Washer S 211 1 2" 100 200.00 $47.00 D Fender Washer S 230 1 4" 100 3.00 $30.00 D Fender Washer S 230 3 8" 100 3.00 $34.00 D Fender Washer S 230 1 2" 100 3.00 $36.00 D Slotted Hex Head Machine Screw S 6075 1 4" x 3 4" 100 2.00 $81.00 D Slotted Hex Head Machine Screw S 6075 5 16" x 1" 100 3.00 $92.00 D Slotted Hex Head Machine Screw S 6075 5 16" x 1 1 4" 100 3.00 $200.00 D Slotted Hex Head Machine Screw S 6075 5 16" x 1 1 2" 100 3.00 $120.00 D Slotted Hex Head Machine Screw S 6075 3 8" x 1 1 4" 100 5.00 $176.00 D Square Nut S 6108 1 4" 100 - $54.00 D Square Nut S 6108 5 16" 100 2.00 $58.00 D Square Nut S 6108 3 8" 100 3.00 $81.00 D Square Nut S 6108 1 2" 100 6.00 $176.00 D Hex Head Cap Screw S 6024 1 4" x 3 4" 100 2.00 $85.00 D Hex Head Cap Screw S 6024 1 4" x 1" 100 2.00 $85.00 D Hex Head Cap Screw S 6024 1 4" x 1 1 4" 100 2.00 $125.00 D Hex Head Cap Screw S 6024 1 4" x 1 1 2" 100 2.00 $135.00 D Hex Head Cap Screw S 6024 3 8" x 3 4" 100 4.00 $85.00 D Hex Head Cap Screw S 6024 3 8" x 1" 100 4.00 $117.00 D Hex Head Cap Screw S 6024 3 8" x 1 1 4" 100 5.00 $89.00 D Hex Head Cap Screw S 6024 3 8" x 1 1 2" 100 6.00 $100.00 D Hex Head Cap Screw S 6024 3 8" x 2" 100 7.00 $129.00 D Hex Head Cap Screw S 6024 1 2" x 3 4" 100 8.00 $172.00 D Hex Head Cap Screw S 6024 1 2" x 1" 100 9.00 $140.00 D Hex Head Cap Screw S 6024 1 2" x 1 1 4" 100 10.00 $161.00 D Hex Head Cap Screw S 6024 1 2" x 1 1 2" 100 12.00 $205.00 D Hex Head Cap Screw S 6024 1 2" x 1 3 4" 100 13.00 $227.00 D Hex Head Cap Screw S 6024 1 2" x 2" 100 14.00 $261.00 D Sold in full box only. EG 22 www.anvilintl.com
Price List...Sheet # S-3.11C Rod or Insulator Support B Description S 85 Part No. fittings Rod Size (In.) B Load Rating Std. Pkg. Rod or Insulator Support S 85 1 4 1 ¹ 8 1 1 4 150 50 23.00 $272.00 D Rod or Insulator Support S 85 3 8 2 2 350 25 95.00 $926.00 D Rod or Insulator Support S 85 1 2 2 5 8 2 1 2 400 25 195.00 $1,625.00 D Sold in full box only. Clamps Fig. 86 Fig. 93 Fig. 94 Fig. 95 S 135X Description Part No. Size Range Clamp with Lock Nut Fig. 86 3 8" thru 3 4" Rod Size (In.) Std. Pkg. Top Beam C Clamp Fig. 93 3 8" thru 1 2" For prices, see nvil International D Top Beam C Clamp Fig. 94 5 8" thru 3 4" Pipe Hanger List Price Sheet D Clamp with Lock Nut Fig. 95 3 8" thru 3 4" D Light Duty Beam Clamp (1) S 135X 1 4 50 14.00 $1,914.00 D (1) Load Rating = 75 Splice Plates and ngles EG EG D Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel S 601 S 602 S 603 S 604 S 605 S 606 S 607 Description Part No. Std. Pkg. GR EG Two Hole Splice Plate (1) S 601 50 38.00 $785.00 $491.00 D Three Hole Splice Plate S 602 25 50.00 $903.00 $638.00 D Two Hole End ngle (1) S 603 50 38.00 $491.00 $471.00 D Two Hole Corner ngle (1) S 604 50 38.00 $491.00 $471.00 D Three Hole Corner ngle (1) S 605 25 58.00 $1,158.00 $1,109.00 D Three Hole Corner ngle (1) S 606 25 58.00 $927.00 $815.00 D Four Hole Corner ngle (1) S 607 25 78.00 $903.00 $883.00 D Sold in full box only. For Zinc Tri-valent Chromium, refer to page 58 in the Specialty Strut Section. (1) For load rating, see nvil Strut Engineering Catalog, page 92. Specialty Strut Technical Data www.anvilintl.com 23
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C Supports S 609 S 611 S 612 S 613 fittings Description Part No. Std. Pkg. GR EG Two Hole Offset Z Support S 609-25 38.00 $1,178.00 $937.00 D Z Support (1) S 611-50 55.00 $1,266.00 $1,099.00 D Z Support (2) S 612 1" 50 47.00 $1,423.00 $982.00 D U Support (1) S 613 1 5 8" 25 88.00 $1,865.00 $1,658.00 D (1) Use with S 200, S 210 and S 500BTB. (2) Use with S 400. For Zinc Tri-valent Chromium, refer to page 58 in the Specialty Strut Section. Connectors and Clevises S 614 S 615 S 616 S 617 Description Part No. Std. Pkg. GR EG Four Hole Joint Corner ngle S 614 25 103.00 $3,715.00 $2,078.00 D Five Hole Shelf Joint ngle S 615 10 135.00 $2,699.00 $2,281.00 D Four Hole Splice Clevis (1) (2) S 616 10 265.00 $3,386.00 $3,465.00 D Three Hole Swivel Plate S 617 25 75.00 $1,625.00 $1,625.00 D Two Hole Swivel Plate S 618 50 55.00 $1,068.00 $1,570.00 D (1) Sold in full box only. (2) Use with S 200 and S 210. For Zinc Tri-valent Chromium, refer to page 58 in the Specialty Strut Section. Square Washers S 619 Bolt Size Description Part No. Std. Pkg. GR EG Square Washer S 619 1 4 100 18.00 $226.00 $206.00 Square Washer S 619 3 8 100 18.00 $226.00 $206.00 Square Washer S 619 1 2 100 17.00 $226.00 $206.00 Square Washer S 619 5 8 100 16.00 $442.00 $216.00 Square Washer S 619 3 4 100 15.00 $442.00 $265.00 Square Washer S 619 7 8 100 14.00 PO $285.00 Sold in full box only. For Stainless Steel and Zinc Tri-valent Chromium, refer to page 59 in the Specialty Strut Section. 24 www.anvilintl.com
Price List...Sheet # S-3.11C Splice Plates and ngles fittings S 620 S 624 S 629 S 631 S 633 S 644 S 645 S 646 Description Part No. ngle Std. Pkg. GR EG Two Hole Connecting Plate S 620-50 35.00 $1,129.00 $933.00 D Two Hole Closed ngle Connector S 624 37 1 2º 25 58.00 $1,395.00 $1,395.00 D Two Hole Closed ngle Connector S 624 45º 25 58.00 $1,462.00 $908.00 D Two Hole Closed ngle Connector S 624 52 1 2º 25 58.00 $1,395.00 $1,395.00 D Two Hole Closed ngle Connector S 624 60º 25 58.00 $1,395.00 $1,395.00 D Two Hole Closed ngle Connector S 624 67 1 2º 25 58.00 $1,395.00 $1,395.00 D Two Hole Closed ngle Connector S 624 75º 25 58.00 $1,395.00 $1,395.00 D Two Hole Closed ngle Connector S 624 82 1 2º 25 58.00 $1,395.00 $1,395.00 D Three Hole Splice Clevis (2) S 629-20 197.00 $3,456.00 $2,464.00 D Two Hole Splice Clevis (2) S 631-25 128.00 $1,701.00 $1,701.00 D Two Hole Open ngle Connector (1) S 633 82 1 2º 25 58.00 $1,364.00 $1,079.00 D Two Hole Open ngle Connector (1) S 633 75º 25 58.00 $1,364.00 $1,079.00 D Two Hole Open ngle Connector (1) S 633 67 1 2º 25 58.00 $1,364.00 $1,079.00 D Two Hole Open ngle Connector (1) S 633 60º 25 58.00 $1,364.00 $1,079.00 D Two Hole Open ngle Connector (1) S 633 52 1 2º 25 58.00 $1,364.00 $1,079.00 D Two Hole Open ngle Connector (1) S 633 45º 25 58.00 $1,276.00 $839.00 D Two Hole Open ngle Connector (1) S 633 37 1 2º 25 58.00 $1,364.00 $1,079.00 D Two Hole Open ngle Connector (1) S 633 30º 25 58.00 $1,364.00 $1,192.00 D Two Hole Open ngle Connector (1) S 633 22 1 2º 25 58.00 $1,364.00 $1,192.00 D Two Hole Open ngle Connector (1) S 633 15º 25 58.00 $1,364.00 $1,192.00 D Two Hole Open ngle Connector (1) S 633 7 1 2º 25 58.00 $1,364.00 $1,192.00 D Two Hole Splice Clevis (3) S 644-20 85.00 $2,503.00 $2,287.00 D Three Hole Splice Clevis (3) S 645-10 130.00 $3,092.00 $2,779.00 D Four Hole Splice Clevis (4) S 646-10 176.00 $2,797.00 $2,192.00 D (1) Sold in full box only. (2) Use with S 200 and S 210. (3) Use with S 500 and S 520. (4) Use with S 500. For Zinc Tri-valent Chromium, refer to page 59 in the Specialty Strut Section. Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel Reversible Strut S 651 Description Part No. Uniform Load Std. Pkg. GR EG Reversible Strut Bracket S 651 6" 1200 BULK 185.00 $5,419.00 $5,154.00 D Reversible Strut Bracket S 651 12" 600 BULK 293.00 $6,184.00 $5,987.00 D Reversible Strut Bracket S 651 18" 400 10 401.00 $7,029.00 $6,430.00 D Reversible Strut Bracket S 651 24" 300 BULK 509.00 $8,148.00 $6,930.00 D Sold in full box only. For Zinc Tri-valent Chromium, refer to page 59 in the Specialty Strut Section. Specialty Strut Technical Data www.anvilintl.com 25
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C Type End Cap S 655, S 656 Description Part No. Std. Pkg. fittings Pg Type End Cap S 655 100 11.00 $189.00 D Type End Cap S 656 100 15.00 $189.00 D Use with S 200 Channel. Use with S 300 Channel and S 349 Insert. Strut Brackets S 661 T1 Description Part No. Connectors S 665 S 666 S 667 S 668 S 669 Description Part No. Std. Pkg. (1) Uniform Load Std. Pkg. Gr Eg Strut Bracket (Slot Up) S 661 T1 6" 1600 BULK 191.00 $8,972.00 D Strut Bracket (Slot Up) S 661 T1 12" 800 BULK 292.00 $6,618.00 D Strut Bracket (Slot Up) S 661 T1 18" 600 BULK 436.00 $13,321.00 D Strut Bracket (Slot Up) S 661 T1 24" 450 BULK 536.00 $9,896.00 D Strut Bracket (Slot Down) S 661 T2 6" 1600 BULK 191.00 $4,434.00 D Strut Bracket (Slot Down) S 661 T2 12" 800 BULK 292.00 $5,480.00 D Strut Bracket (Slot Down) S 661 T2 18" 600 BULK 436.00 $8,246.00 D Strut Bracket (Slot Down) S 661 T2 24" 450 BULK 536.00 $8,195.00 D (1) Mounted on 12 Ga. Channel S 661 T2 Four Hole Double Corner Connector S 665 25 76.00 $1,697.00 $1,586.00 D Six Hole Double Corner Connector S 666 25 115.00 $3,023.00 $3,023.00 D Eight Hole Double Corner Connector S 667 10 155.00 $3,641.00 $3,023.00 D Six Hole Three ngle Connector S 668 10 113.00 $2,650.00 $2,455.00 D Twelve Hole Three ngle Clevis Connector S 669 10 230.00 $4,345.00 $4,345.00 D For Zinc Tri-valent Chromium, refer to page 60 in the Specialty Strut Section. GR 26 www.anvilintl.com
Price List...Sheet # S-3.11C Supports S 677 S 678 S 679 fittings Description Part No. Std. Pkg. Supports and Clamps S 687 S 689 Description Part No. C to C Std. Pkg. GR EG Slotted U Support (1) S 687 7 1 4" 4 1 8" 10 105.00 $2,192.00 $2,192.00 D Slotted U Support (1) S 687 B 8 1 2" 5 3 8" 10 120.00 $2,419.00 $2,419.00 D Slotted U Support (1) S 687 C 10 3 8" 7 1 4" 10 130.00 $2,607.00 $2,607.00 D djustable Double Slotted Corner Connector S 689 6 5 8" 4" 10 190.00 $3,691.00 $3,515.00 D djustable Double Slotted Corner Connector S 689 B 8 5 8" 6" 10 242.00 $3,741.00 $3,741.00 D (1) Use with S 200 and S 210. GR EG Cup Support for Standard Single Strut (1) S 677-25 76.00 $2,229.00 $2,229.00 D Three Hole U Support (2) S 678-10 197.00 $3,062.00 $2,758.00 D U Support (3) S 679 3 1 4 25 128.00 $2,404.00 $2,192.00 D (1) Use with S 200 and S 210. (2) Use with S 150BTB. (3) Use with S 100, S 200BTB, and S 210BTB. For Zinc Tri-valent Chromium, refer to page 60 in the Specialty Strut Section. Clamps S 684 S 685 S 686 Description Part No. Load Rating Std. Pkg. GR EG Beam Clamp (1) S 684 500 25 94.00 $2,669.00 $2,078.00 D Beam Clamp (1) S 685 450 20 63.00 $2,002.00 $2,002.00 D Beam Clamp (2) (3) S 686 600 (4) 50 26.00 $726.00 $520.00 D (1) Includes cup point and set screw. (2) Order S 6024 1 2" x 1 1 2" separately. (3) Sold in full box only. (4) Load Rating when used with 12 Ga. Channel. 14 Ga. Channel is 500 lbs. C to C C to C Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel www.anvilintl.com 27
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C Supports and Plates fittings S 708 S 710 S 711 S 712 S 714 S 715 S 718 S 719 S 720 S 721 Description Part No. Std. Pkg. Gr Eg Single Channel Bracket Support (1) S 708 20 235.00 $7,706.00 $6,282.00 D U Support (2) S 710 25 84.00 $1,815.00 $1,510.00 D Z Support (2) S 711 25 53.00 $1,521.00 $1,172.00 D Cross Plate S 712 10 105.00 $2,600.00 $2,343.00 D T Plate (4) S 714 25 80.00 $1,933.00 $1,285.00 D T Plate 90º ngle S 715 20 71.00 $1,851.00 $3,023.00 D Flat ngle Plate (4) S 718 50 58.00 $1,482.00 $883.00 D Four Hole Corner Plate S 719 20 80.00 $1,549.00 $1,549.00 D Right Hand ngle Plate Connector S 720 RH 25 55.00 $1,625.00 $1,625.00 D Left Hand ngle Plate Connector S 720 LH 25 55.00 $1,625.00 $1,625.00 D U Support (3) S 721 25 105.00 $2,380.00 $2,380.00 D (1) Use with S 200, S 210 and S 500BTB. (2) Use with S 300. (3) Use with S 100, S 200BTB, and S 210BTB. (4) Sold in full box only. For Zinc Tri-valent Chromium, refer to page 60 in the Specialty Strut Section. Shelf Bracket S 732 Description Part No. B Uniform Load Std. Pkg. Shelf Bracket S 732 8" 6" 800 BULK 168.00 $5,939.00 D Shelf Bracket S 732 10" 6" 800 BULK 202.00 $6,282.00 D Shelf Bracket S 732 12" 6" 900 BULK 258.00 $16,127.00 D Shelf Bracket S 732 14" 6" 900 BULK 292.00 $7,215.00 D Shelf Bracket S 732 16" 6" 1200 BULK 381.00 $9,374.00 D Shelf Bracket S 732 18" 6" 1200 BULK 416.00 $9,914.00 D Shelf Bracket S 732 20" 6" 1200 BULK 461.00 $15,408.00 D Mounted on 12 Ga. Channel B Gr 28 www.anvilintl.com
Price List...Sheet # S-3.11C Supports S 733 S 735 Description Part No. Std. Pkg. fittings Gr Eg Six Hole U Support (1) S 733 10 171.00 $4,345.00 $4,345.00 D Eight Hole U Support (2) S 735 10 257.00 $5,102.00 $5,102.00 D (1) Use with S 200, S 210. (2) Use with S 200BTB. Channel Nuts & Hardware Fittings Connectors S 744 S 745 Slotted djustment Corner ngle S 763, S 764 S 747 S 748 Description Part No. Std. Pkg. Description Part No. C To End Std. Pkg. Gr Eg Flat Corner Connector S 744 25 70.00 $1,360.00 $1,360.00 D Three Hole Corner ngle (1) S 745 50 58.00 $1,442.00 $1,188.00 D Symmetrical Four Hole Connector S 747 20 105.00 $2,267.00 $2,267.00 D Four Hole Corner Joint Connector S 748 25 105.00 $1,890.00 $1,890.00 D Four Hole Corner Connector S 750 20 105.00 $3,788.00 $2,474.00 D (1) For load rating, see nvil Strut Engineering Catalog, page 92. C to End S 750 Gr Eg Slotted djustment Two Hole Corner ngle S 763 4 7 8" 2 1 2" 25 65.00 $1,433.00 $1,334.00 D Slotted djustment Corner ngle S 764 6 7 8" 4 1 2" 25 85.00 $1,775.00 $1,775.00 D Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports www.anvilintl.com 29
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C ngle Connectors S 781 fittings Description Part No. ngle Std. Pkg. Gr Eg Four Hole Open ngle Connector S 781 7 1 2 25 78.00 $1,405.00 $1,405.00 D Four Hole Open ngle Connector S 781 15 25 78.00 $1,405.00 $1,405.00 D Four Hole Open ngle Connector S 781 22 1 2 25 78.00 $1,405.00 $1,405.00 D Four Hole Open ngle Connector S 781 30 25 78.00 $1,405.00 $1,405.00 D Four Hole Open ngle Connector S 781 37 1 2 25 78.00 $1,405.00 $1,405.00 D Four Hole Open ngle Connector S 781 45 25 78.00 $1,405.00 $1,412.00 D Four Hole Open ngle Connector S 781 52 1 2 25 78.00 $1,405.00 $1,405.00 D Four Hole Open ngle Connector S 781 60 25 78.00 $1,405.00 $1,405.00 D Four Hole Open ngle Connector S 781 67 1 2 25 78.00 $1,405.00 $1,405.00 D Four Hole Open ngle Connector S 781 75 25 78.00 $1,405.00 $1,405.00 D Four Hole Open ngle Connector S 781 82 1 2 25 78.00 $1,405.00 $1,405.00 D Four Hole Closed ngle Connector S 793 37 1 2 25 100.00 $1,962.00 $1,962.00 D Four Hole Closed ngle Connector S 793 45 25 100.00 $1,962.00 $1,962.00 D Four Hole Closed ngle Connector S 793 52 1 2 25 100.00 $1,962.00 $1,962.00 D Four Hole Closed ngle Connector S 793 60 25 100.00 $1,962.00 $1,962.00 D Four Hole Closed ngle Connector S 793 67 1 2 25 100.00 $1,962.00 $1,962.00 D Four Hole Closed ngle Connector S 793 75 25 100.00 $1,962.00 $1,962.00 D Four Hole Closed ngle Connector S 793 82 1 2 25 100.00 $1,962.00 $1,962.00 D Two Hole ngle S 806 S 793 Description Part No. Std. Pkg. Gr Eg Two Hole ngle with Impressions on both legs S 806 50 40.00 $1,462.00 $981.00 D 30 www.anvilintl.com
Price List...Sheet # S-3.11C Brackets, Connectors and Supports fittings S 809 S 821 S 825 S 838 B 2 " C 1 " Channel Nuts & Hardware Description Part No. Uniform Load Std. Pkg. Gr Eg Double Channel Bracket (1) S 809 12" 2000 BULK 502.00 $12,614.00 $9,717.00 D Double Channel Bracket (1) S 809 18" 1300 BULK 692.00 $15,000.00 $10,602.00 D Double Channel Bracket (1) S 809 24" 1000 BULK 882.00 $17,637.00 $13,489.00 D Double Channel Bracket (1) S 809 30" 800 BULK 1072.00 $20,072.00 $25,179.00 D Double Channel Bracket (1) S 809 36" 650 BULK 1262.00 $23,332.00 $24,531.00 D Eight Hole Double ngle Connector S 821 - - 10 150.00 $5,291.00 $5,291.00 D Right Hand Pipe xle Support S 825 RH - 2500 10 220.00 $4,534.00 $4,907.00 D Left Hand Pipe xle Support S 825 LH - 2500 10 220.00 $4,534.00 $4,907.00 D RH/LH Shelf Bracket (2) S 838 6" 275 25 58.00 $1,890.00 $1,890.00 D RH/LH Shelf Bracket (2) S 838 8" 275 25 83.00 $2,895.00 $2,078.00 D RH/LH Shelf Bracket (2) S 838 10" 275 25 114.00 $2,699.00 $2,267.00 D RH/LH Shelf Bracket (2) S 838 12" 275 25 149.00 $2,455.00 $2,455.00 D RH/LH Shelf Bracket (2) S 838 14" 275 25 174.00 $2,796.00 $2,796.00 D RH/LH Shelf Bracket (2) S 838 16" 275 20 225.00 $3,099.00 $3,099.00 D RH/LH Shelf Bracket (2) S 838 18" 275 20 255.00 $4,574.00 $3,439.00 D RH/LH Shelf Bracket (2) S 838 20" 275 20 295.00 $3,780.00 $3,780.00 D RH/LH Shelf Bracket (2) S 838 22" 275-361.00 $4,422.00 $4,422.00 D RH/LH Shelf Bracket (2) S 838 24" 275-396.00 $4,761.00 $4,761.00 D RH/LH Shelf Bracket (2) S 838 26" 275-456.00 $5,178.00 $5,178.00 D RH/LH Shelf Bracket (2) S 838 28" 275-479.00 $5,555.00 $5,555.00 D RH/LH Shelf Bracket (2) S 838 30" 275-544.00 $6,008.00 $6,008.00 D (1) Mounted on 12 Ga. Channel. (2) Uniform Load Rating 275 lbs. When Mounted on 12 Ga. Channel. For Zinc Tri-valent Chromium, refer to page 60 in the Specialty Strut Section. Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Technical Data www.anvilintl.com 31
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C Connectors and Clamps S 854 S 855 S 858 S 865 Description Part No. Length fittings Load Rating Std. Pkg. Gr Eg Five Hole Flat Connector S 854 5 3 8-25 148.00 $3,288.00 $3,288.00 D ngular I Beam Clamp (1) (4) S 855 1-500 25 107.00 $1,972.00 $1,619.00 D ngular I Beam Clamp (2) (4) S 855 2-500 25 98.00 $1,972.00 $2,192.00 D Heavy Duty Suspension Rod Beam Clamps (3) S 858 1 4" x 20 650 10 67.00 - $3,543.00 D Heavy Duty Suspension Rod Beam Clamps (3) S 858 5 16" x 18 650 10 67.00 - $3,543.00 D Heavy Duty Suspension Rod Beam Clamps (3) S 858 3 8" x 16 1100 10 67.00 - $3,788.00 D Heavy Duty Suspension Rod Beam Clamps (3) S 858 1 2" x 13 1600 10 130.00 - $4,457.00 D Heavy Duty Suspension Rod Beam Clamps (3) S 858 5 8" x 11 2400 10 160.00 - $7,066.00 D Heavy Duty Suspension Rod Beam Clamps (3) S 858 3 4" x 10 2400 10 160.00 - $7,066.00 D Wide Throat Heavy Duty Beam Clamp (3) S 865 1 4" x 20 800 10 151.00 - $0.00 D Wide Throat Heavy Duty Beam Clamp (3) S 865 3 8" x 16 1300 10 195.00 - $4,534.00 D Wide Throat Heavy Duty Beam Clamp (3) S 865 1 2" x 13 1900 10 225.00 - $5,232.00 D (1) Use with S 200, and S 210. (2) Use with S 500. (3) Includes Set Screw (Safety nchor Strap S 871 to be ordered separately according to length required.) (4) Sold in full box only. Safety nchor Strap S 871 Description Part No. Length Std. Pkg. Safety nchor Strap S 871 9" BULK 33.00 $540.00 D Safety nchor Strap S 871 12" BULK 48.00 $589.00 D Safety nchor Strap S 871 15" BULK 57.00 $736.00 D (For Heavy Duty Beam Clamps.) Use with S 858, and S 865. (Cannot be used with 5 8" Rod Size Beam Clamps and larger.) Four Hole Splice Plate S 888 Description Part No. Std. Pkg. EG gr eg Four Hole Splice Plate S 888 25 78.00 $1,227.00 $835.00 D Five Hole Splice Plate S 889 50 94.00 $1,747.00 $1,747.00 D Sold in full box only. For Zinc Tri-valent Chromium, refer to page 60 in the Specialty Strut Section. 32 www.anvilintl.com
Price List...Sheet # S-3.11C Type End Cap S 901, S 902 fittings Description Part No. Std. Pkg. Type End Cap S 901 1" 100 11.00 $189.00 D Type End Cap S 902 3 1 4" 100 22.00 $199.00 D Use with S 100 and S 400 Channel PG Channel Nuts & Hardware Fittings I Beam Clamp S 907 Description Part No. D Load Rating Std. Pkg. GR EG I Beam Clamp S 907 1 4" 3 8 x 16 x 1 1 2 500 50 26.00 $1,510.00 $1,510.00 D Includes Cup Point Set Screw. Connectors and ngles S 913 D S 921 S 922 S 923 S 925 Description Part No. Std. Pkg. S 926 GR EG Ten Hole Two ngle Clevis Connector S 913 10 193.00 $5,291.00 $5,291.00 D One Hole ngle S 921 3 7 8" 25 61.00 $1,178.00 $1,178.00 D One Hole ngle S 921 B 5 7 8" 25 84.00 $1,521.00 $1,521.00 D One Hole ngle S 921 C 7 7 8" 25 107.00 $1,619.00 $1,619.00 D One Hole ngle S 921 D 9 7 8" 25 130.00 $1,914.00 $1,914.00 D Two Hole Single Corner ngle Connector S 922 RH 20 60.00 $1,775.00 $1,775.00 D Two Hole Single Corner ngle Connector S 922 LH 20 60.00 $1,775.00 $1,775.00 D Five Hole Two ngle Connector S 923 25 93.00 $2,307.00 $2,192.00 D Symmetrical Three Hole Joint Connector S 925 25 70.00 $1,247.00 $1,247.00 D Strut Brace S 926 12" 15 160.00 $3,189.00 $2,963.00 D Strut Brace S 926 18" 10 218.00 $4,143.00 $2,385.00 D Strut Brace S 926 24" BULK 280.00 $3,141.00 $4,117.00 D Five Hole Corner Connector S 927 10 154.00 $3,400.00 $3,553.00 D For Stainless Steel and Zinc Tri-valent Chromium, refer to page 60 in the Specialty Strut Section. S 927 Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports www.anvilintl.com 33
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C Supports fittings Description Part No. Std. Pkg. Type End Cap S 930 Description Part No. Std. Pkg. PG Type End Cap S 930 200 5.00 $189.00 D Use with S 500 Channel GR EG Z Support S 928 13 16" 50 47.00 $937.00 $937.00 D U Support S 929 13 16" 25 71.00 $1,739.00 $1,739.00 D Use with S 500 and S 520. For Zinc Tri-valent Chromium, refer to page 60 in the Specialty Strut Section. Supports and Clevises S 929 Description Part No. Std. Pkg. GR EG U Support (1) S 978 1" 20 71.00 $1,360.00 $1,360.00 D Inside Clevis S 993 4" 25 78.00 $1,322.00 $1,322.00 D Inside Clevis S 993 5" 25 89.00 $1,436.00 $1,521.00 D Inside Clevis S 993 6" 25 101.00 $1,586.00 $1,586.00 D Inside Clevis S 993 7" 25 112.00 $1,662.00 $1,662.00 D Inside Clevis S 993 8" 20 124.00 $1,814.00 $1,814.00 D (1) Use with S 400 S 928 S 978 S 993 34 www.anvilintl.com
Price List...Sheet # S-3.11C I Beam Clamp D Description Part No. D fittings Load Rating Std. Pkg. I Beam Clamp S 998 3 8" 1 2 x 13 x 1 1 2 500 25 83.00 $1,653.00 D Includes Set Screw. S 998 EG Channel Nuts & Hardware Fittings Double Column Post Base S 2064 Description Part No. Std. Pkg. GR EG Double Column Post Base S 2064 5 311.00 $11,288.00 $11,288.00 D Use with S 100, S 200BTB, S 200STS, S 200BTS and S 200STSR Connectors S 2119 S 2112 S 2128 S 2190 Description Part No. Std. Pkg. GR EG Seven Hole Cross Connector S 2112-10 240.00 $5,102.00 $5,102.00 D U Connector (1) S 2119 1 5 8" 25 95.00 $2,811.00 $2,758.00 D Right Hand Six Hole Corner Connector S 2128 RH - 10 119.00 $2,078.00 $2,078.00 D Left Hand Six Hole Corner Connector S 2128 LH - 10 119.00 $2,078.00 $2,078.00 D Corner ngle S 2144 3" 25 49.00 $968.00 $968.00 D Corner ngle S 2144 3 1 2" 25 54.00 $1,021.00 $1,021.00 D Corner ngle S 2144 4" 25 61.00 $1,077.00 $1,077.00 D Flat Corner Connector S 2190-20 150.00 $3,386.00 $3,386.00 D (1) Use with S 200 and S 210. S 2144 Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports www.anvilintl.com 35
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C Ladder and Stair Supports S 2401 S 2403 fittings S 2404 S 2408 S 2421 S 2422 Description Part No. B Std. Pkg. GR HG Ladder Rung S 2401 12" - 10 186.00 $2,740.00 $2,740.00 D Ladder Rung S 2402 15" - 20 221.00 $2,835.00 $2,835.00 D Ladder Rung S 2403 18" - 20 254.00 $3,174.00 $3,174.00 D Wall Ladder Bracket S 2404 2 3 8" 6" 10 113.00 $1,966.00 $1,966.00 D Wall Ladder Bracket S 2405 4 3 8" 8" 10 164.00 $2,646.00 $2,646.00 D Wall Ladder Bracket S 2406 6 3 8" 10" 10 216.00 $3,400.00 $3,400.00 D Wall Ladder Bracket S 2407 8 3 8" 12" 10 267.00 $3,704.00 $3,704.00 D Wall Ladder Bracket S 2408 10 3 8" 14" 10 318.00 $4,157.00 $4,157.00 D 45 Stair Tread Support S 2421 - - 20 220.00 $4,725.00 $4,725.00 D 37 1 2 Stair Tread Support S 2422 - - 25 213.00 $4,345.00 $4,345.00 D Square Washers S 2504 Description Part No. SIze Std. Pkg. End Cap with Knock Out S 2511 Description Part No. B Std. Pkg. End Cap with Knock Out (1) S 2511 1 3 1 4" 1 3 4" 50 31.00 $1,001.00 D End Cap with Knock Out (2) S 2511 2 1 5 8" 1 3 4" 50 27.00 $869.00 D End Cap with Knock Out (3) S 2511 3 1 5 8" 1 3 4" 50 26.00 $1,001.00 D (1) Use with S 100. (2) Use with S 200 and S 210. (3) Use with S 300 GR EG Square Washer with Channel Guide S 2504 1 4" 100 18.00 $589.00 $442.00 D Square Washer with Channel Guide S 2504 3 8" 100 18.00 $589.00 $442.00 D Square Washer with Channel Guide S 2504 1 2" 100 17.00 $589.00 $442.00 D Sold in full box only. B B EG 36 www.anvilintl.com
Price List...Sheet # S-3.11C Two Hole djustment ngle S 2520 Description Part No. Std. Pkg. fittings GR EG Two Hole djustment ngle S 2520 25 42.00 $1,473.00 $1,374.00 D Trolleys Description S 2521 Part No. Load Rating Std. Pkg. GR EG Two Wheel Trolley (1) S 2521 300 20 46.00 - $8,246.00 D Four Wheel Trolley (1) S 2522 600 10 110.00 - $14,077.00 D Trolley Beam Standard Support (2) S 2528 600 10 102.00 $2,835.00 $2,835.00 D Trolley Beam Joint Support (2) S 2528-1 2500 10 220.00 $3,704.00 $3,704.00 D (1) Use with S 200. (2) Use with S 200 and S 210 Channels. S 2522 S 2528 S 2528-1 Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel Slotted 90 ngle S 2545 Description Part No. Std. Pkg. GR EG Slotted 90 ngle S 2545 50 38.00 $982.00 $982.00 D Conduit Connector Fitting ssembly S 2560, S 2561 Description Part No. Use With Std. Pkg. Conduit Connector Fitting ssembly S 2560 1 2" Conduit 50 36.00 $869.00 D Conduit Connector Fitting ssembly S 2561 3 4" Conduit 25 36.00 $954.00 D EG Concrete Inserts Specialty Strut Technical Data www.anvilintl.com 37
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C Type End Cap S 2580 Description Part No. Std. Pkg. fittings EG Type End Cap S 2580 100 18.00 $199.00 D Z Support Description Part No. Std. Pkg. Use with S 150. S 2601 GR HG Z Support S 2601 2 7 16" 25 67.00 $1,717.00 $1,247.00 D Swivel dapter Description Spacer Clevis S 2627 2 " Use with S 2622 Beam Clamp. 2 " 4 " 1 21 /32 " 7 /8 8" " Dia. Dia. S 2623 Part No. Load Rating Description Part No. Std. Pkg. Std. Pkg. Swivel dapter S 2623 300 50 31.00 $835.00 D Spacer Clevis S 2627 25 24.00 $1,223.00 D EG EG 38 www.anvilintl.com
Price List...Sheet # S-3.11C Hangers S 2631 Description Part No. Size fittings Load Rating Std. Pkg. S 2631 Swing Gate Fixture Hanger (1) S 2631 9 16" 90 20 27.00 $1,276.00 D S 2631 D Swing Gate Fixture Hanger (2) S 2631 D 9 16" 90 20 33.00 $1,658.00 D (1) Use with S 200, S 210, S 300, S 400 and S 500. (2) Use with S 100, S 150, S 200BTB and S 210BTB. EG Channel Nuts & Hardware Fittings U Supports Description Part No. Std. Pkg. Use with S 150. GR EG U Support S 2648 2 7 16" 25 108.00 $2,192.00 $2,522.00 D Beam Clamp S 2651 Description S 2648 Part No. Load Rating Std. Pkg. Beam Clamp (1) S 2651 T1 1000 25 80.00 $1,178.00 D Beam Clamp (2) S 2651 T2 1000 25 80.00 $1,276.00 D Sold in full box only. For Zinc Tri-valent Chromium, refer to page 63 in the Specialty Strut Section. (1) Use with S 200, S 210, S 300, S 400, S 500 and S 520. (2) Use with S 100, S 150 and S 200BTB. Column ttachment S 2654 Description Part No. Slip Rating Std. Pkg. EG GR EG Column ttachment (1) S 2654 800 25 41.00 $5,015.00 $4,045.00 D Column ttachment (2) S 2654 800 25 41.00 $5,015.00 $4,045.00 D (1) Use with S 200. (2) Use with S 500. Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports www.anvilintl.com 39
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C Beam Clamps S 2656 S 2657 Description Part No. Std. Pkg. fittings U Bolt Beam Clamp with Hook (1) S 2656 T1 6 10 130.00 $3,586.00 D U Bolt Beam Clamp with Hook (1) S 2656 T1 12 10 142.00 $4,171.00 D U Bolt Beam Clamp with Hook (2) S 2656 T2 6 10 141.00 $3,726.00 D U Bolt Beam Clamp with Hook (2) S 2656 T2 12 10 153.00 $4,393.00 D Double U Bolt Beam Clamp (1) S 2657 T1 6 10 204.00 $6,680.00 D Double U Bolt Beam Clamp (1) S 2657 T1 12 10 210.00 $6,909.00 D Double U Bolt Beam Clamp (2) S 2657 T2 6 10 226.00 $7,332.00 D Double U Bolt Beam Clamp (2) S 2657 T2 12 10 232.00 $6,909.00 D Note: Specify 6" or 12" Max Flange Width. (1) Use with S 200, S 210, S 300, S 400, S 500 and S 520. (2) Use with S 100, S 150 and S 200BTB. Post Bases S 3013 S 3025 S 3029 S 3033 S 3040 Description Part No. Std. Pkg. EG GR EG Single Column Post Base (1) S 3013 10 307.00 $5,232.00 $4,466.00 D Single Column Post Base (1) S 3013 SQ 5 307.00 $5,742.00 $4,466.00 D Single Column Post Base (1) S3013FL 10 307.00 $0.00 $0.00 D Post Base (1) (3) S 3025 10 358.00 $5,203.00 $5,203.00 D Post Base (1) (3) S 3025 FL 10 358.00 $5,055.00 $4,565.00 D Double Column Post Base (2) S 3029 5 325.00 $5,669.00 $5,669.00 D Post Base (1) (3) S 3033 10 373.00 $5,399.00 $5,399.00 D Post Base (1) (3) S 3033 SQ 10 373.00 $5,693.00 $5,399.00 D Post Base (1) S 3040 10 297.00 $6,380.00 $6,380.00 D (1) Use with S 200 and S 210. (2) Use with all 3 1 4" Channels. (3) Sold in full box only. For Zinc Tri-valent Chromium, refer to page 63 in the Specialty Strut Section. 40 www.anvilintl.com
Price List...Sheet # S-3.11C Connectors S 3049 S 3060 fittings Description Part No. Std. Pkg. Double Column Post Base GR EG Two Hole Slotted 90 Corner Connector S 3049-25 66.00 $3,152.00 $1,276.00 D Offset Connector S 3060 4" 25 81.00 $1,322.00 $1,322.00 D Offset Connector S 3060 5" 25 92.00 $1,873.00 $1,436.00 D Offset Connector S 3060 6" 25 104.00 $1,586.00 $1,586.00 D Offset Connector S 3060 7" 25 115.00 $1,625.00 $1,625.00 D Offset Connector S 3060 8" 25 127.00 $2,613.00 $1,701.00 D Pipe/Conduit Supports Fittings Nuts & Hardware Channel S 3064 Description Part No. Std. Pkg. GR EG Double Column Post Base S 3064 10 408.00 $7,176.00 $7,181.00 D Double Column Post Base S3064SQ 10 408.00 $7,181.00 $7,181.00 D Use with all 3 1 4" Channels. For Zinc Tri-valent Chromium, refer to page 63 in the Specialty Strut Section. Supports and Brackets S 3164 S 3373 Description Part No. Std. Pkg. GR EG Double Channel Bracket Support (1) S 3164 10 273.00 $7,706.00 $7,706.00 D Universal ngle Bracket (2) S 3373 10 134.00 $3,936.00 $2,797.00 D (1) Use with all 3 1 4" Channels. (2) For load rating, see nvil Strut Engineering Catalog, page 92. For Zinc Tri-valent Chromium, refer to page 63 in the Specialty Strut Section. Technical Data Specialty Strut Concrete Inserts Klo-Shure www.anvilintl.com 41
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C Safety End Caps S 6153 djustable Base Description Part No. Std. Pkg. fittings Description Part No. Size Std. Pkg. S 9400 red white GR EG Safety End Cap (1) S 6153 1 100 - $1,561.00 $1,561.00 D Safety End Cap (2) S 6153 2 50 2.00 $1,031.00 $1,031.00 D Safety End Cap (3) S 6153 3 100 2.00 $1,487.00 $1,487.00 D Safety End Cap (4) S 6153 5 100 2.00 $1,148.00 $1,148.00 D (1) Use with S 100. (2) Use with S 200 and S 210. (3) Use with S 300. (4) Use with S 500. djustable Base S 9400 10 307.00 $6,920.00 $8,295.00 D Double djustable Base S 9401 5 497.00 $0.00 $12,758.00 D Hinge Connectors S 9402 S 9403 S 9404 Description Part No. Hole Diameter B Std. Pkg. Two Hole Hinge Connector S 9402 1 2" 15 90.00 $15,215.00 D Two Hole Hinge Connector S 9402 5 8" 15 88.00 $7,629.00 D Two Hole Hinge Connector S 9402 3 4" 15 86.00 $7,862.00 D Three Hole Hinge Connector S 9403 1 2" 15 108.00 $15,215.00 D Three Hole Hinge Connector S 9403 5 8" 15 107.00 $8,094.00 D Three Hole Hinge Connector S 9403 3 4" 15 106.00 $8,325.00 D Four Hole Hinge Connector S 9404 1 2" 10 126.00 $16,294.00 D EG 42 www.anvilintl.com
Price List...Sheet # S-3.11C Right ngle Pipe or Conduit Clamp S 51 Description Part No. Size Std. Pkg. Right ngle Pipe or Conduit Clamp Sold in full box only. pipe & conduit support EG S 51 3 8" 50 25.00 $1,263.00 D S 51 1 2" 50 41.00 $1,223.00 D S 51 3 4" 50 42.00 $1,278.00 D S 51 1" 50 47.00 $1,409.00 D S 51 1 1 4" 50 54.00 $1,583.00 D S 51 1 1 2" 50 57.00 $1,771.00 D S 51 2" 50 85.00 $2,569.00 D S 51 2 1 2" 50 106.00 $3,185.00 D S 51 3" 25 110.00 $3,463.00 D S 51 3 1 2" 50 128.00 $4,463.00 D S 51 4" 50 140.00 $4,852.00 D Pipe/Conduit Supports Fittings Nuts & Hardware Channel Hangers and U Bolts Fig. 67 Conduit Clamp S 270 Description Part No. Size Std. Pkg. Conduit Clamp Fig. 69 Fig. 137 Description Part No. Size Range Pipe or Conduit Hanger Fig. 67 1 2" thru 6" Swivel Ring Hanger Fig. 69 1 2" thru 4" U Bolts with Nuts Long Tangent Fig. 137 1 2" thru 4" For prices, see nvil International Pipe Hanger List Price Sheet EG S 270 3 8" 1 2" 50 6.00 $196.00 D S 270 3 4" 50 8.00 $226.00 D S 270 1" 50 9.00 $598.00 D S 270 1 1 4" 25 11.00 $320.00 D S 270 1 1 2" 25 19.00 $466.00 D S 270 2" 50 27.00 $591.00 D Technical Data Specialty Strut Concrete Inserts Klo-Shure www.anvilintl.com 43
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C (6" to 16" Pipe) Double Roller Pipe Support S 815 6-16 Description pipe & conduit support Part No. Load Rating Std. Pkg. EG HG (6" to 16" Pipe) Double Roller Pipe Support S 815 6-16 1500 5 680.00 $18,105.00 - D Order nuts and bolts separately EMT Conduit Clamp pre-assembled S 1000S Description Part No. Size O.D. Size Pre-ssembled EMT Conduit Clamps Now only offered in Pre-ssembled Load Rating Std. Pkg. EG S 1000S 1 2" 0.707 400 100 11.00 $191.00 B S 1000S 3 4" 0.922 400 100 12.00 $191.00 B S 1000S 1" 1.163 600 100 15.00 $226.00 B S 1000S 1 1 4" 1.51 600 100 18.00 $295.00 B S 1000S 1 1 2" 1.74 800 50 29.00 $314.00 B S 1000S 2" 2.197 800 50 33.00 $413.00 B 44 www.anvilintl.com
Price List...Sheet # S-3.11C rigid steel Conduit Clamps pre-assembled S 1100S Description Part No. Size O.D. Size Pre-ssembled Rigid Steel Conduit and Pipe Clamps pipe & conduit support Now only offered in Pre-ssembled Load Rating Std. Pkg. EG S 1100S 3 8" 0.675 400 100 10.00 $211.00 S 1100S 1 2" 0.840 400 100 11.00 $211.00 S 1100S 3 4" 1.050 600 100 15.00 $211.00 S 1100S 1 1.315 600 100 17.00 $231.00 S 1100S 1 1 4" 1.660 600 100 19.00 $275.00 S 1100S 1 1 2" 1.900 800 50 29.00 $363.00 S 1100S 2" 2.375 800 50 34.00 $393.00 S 1100S 2 1 2" 2.875 800 50 40.00 $491.00 S 1100S 3 3.500 800 50 47.00 $530.00 S 1100S 3 1 2" 4.000 1000 25 62.00 $570.00 S 1100S 4" 4.500 1000 25 67.00 $697.00 S 1100S 5" 5.563 1000 25 80.00 $953.00 S 1100S 6" 6.625 1000 25 102.00 $1,262.00 S 1100S 8" 8.625 1000 25 110.00 $1,487.00 S 1100S 10" 10.750 1000 10 130.00 $2,273.00 S 1100S 12" 12.750 1000 10 170.00 $3,254.00 lso for IMC and GRC. Sold in full box only. For Stainless Steel and Zinc Tri-valent Chromium, refer to page 61 in the Specialty Strut Section. Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel O.D. Tubing Clamp pre-assembled S 1200S Now only offered in Pre-ssembled Description Part No. Size Tube Load Std. Size Rating Pkg. EG Copper Plated S 1200S 1 4" 1 8" 400 100 8.00 $186.00 PO S 1200S 3 8" 1 4" 400 100 8.00 $186.00 $235.00 S 1200S 1 2" 3 8" 400 100 8.00 $186.00 $255.00 S 1200S 5 8" 1 2" 400 100 10.00 $186.00 $275.00 S 1200S 3 4" 5 8" 400 100 11.00 $186.00 PO S 1200S 7 8" 3 4" 400 100 12.00 $196.00 $314.00 S 1200S 1" 7 8" 600 100 14.00 $245.00 PO Pre-ssembled O.D. Tubing Clamp S 1200S 1 1 8" 1" 600 100 15.00 $275.00 $333.00 S 1200S 1 1 4" 1 1 8" 600 100 16.00 $279.00 PO S 1200S 1 3 8" 1 1 4" 600 100 17.00 $295.00 $449.00 S 1200S 1 1 2" 1 3 8" 600 100 18.00 $314.00 PO S 1200S 1 5 8" 1 1 2" 600 100 19.00 $333.00 $496.00 S 1200S 1 3 4" 1 5 8" 800 50 29.00 $432.00 PO S 1200S 1 7 8" 1 3 4" 800 50 28.00 $451.00 PO S 1200S 2" 1 7 8" 800 50 31.00 $471.00 PO Sold in full box only. For Stainless Steel and Zinc Tri-valent Chromium, refer to page 62 in the Specialty Strut Section. Concrete Inserts Specialty Strut Technical Data www.anvilintl.com 45
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C O.D. Tubing Clamp (continued) pipe & conduit support Description Part No. Size Tube Load Std. Size Rating Pkg. EG Copper Plated S 1200S 2 1 8" 2" 800 50 32.00 $491.00 $716.00 S 1200S 2 1 4" 2 1 8" 800 50 33.00 $501.00 PO S 1200S 2 3 8" 2 1 4" 800 50 34.00 $501.00 PO S 1200S 2 1 2" 2 3 8" 800 50 35.00 $520.00 PO S 1200S 2 5 8" 2 1 2" 800 50 37.00 $540.00 $866.00 S 1200S 2 3 4" 2 5 8" 800 50 38.00 $560.00 PO S 1200S 2 7 8" 2 3 4" 800 50 40.00 $579.00 PO S 1200S 3" 2 7 8" 800 50 41.00 $756.00 PO S 1200S 3 1 8" 3" 800 50 43.00 $756.00 $976.00 S 1200S 3 1 4" 3 1 8" 800 50 45.00 $756.00 PO S 1200S 3 3 8" 3 1 4" 800 50 46.00 $756.00 PO S 1200S 3 1 2" 3 3 8" 800 50 47.00 $832.00 PO S 1200S 3 5 8" 3 1 2" 800 25 56.00 $908.00 $1,211.00 S 1200S 3 3 4" 3 5 8" 800 25 58.00 $908.00 PO S 1200S 3 7 8" 3 3 4" 1000 25 60.00 $1,021.00 PO S 1200S 4" 3 7 8" 1000 25 62.00 $1,035.00 PO S 1200S 4 1 8" 4" 1000 25 62.00 $1,096.00 $1,405.00 S 1200S 4 1 4" 4 1 8" 1000 25 64.00 $1,153.00 PO S 1200S 4 3 8" 4 1 4" 1000 25 66.00 $1,172.00 PO S 1200S 4 1 2" 4 3 8" 1000 25 67.00 $1,209.00 PO S 1200S 4 5 8" 4 1 2" 1000 25 70.00 $1,228.00 PO S 1200S 4 3 4" 4 5 8" 1000 25 72.00 $1,247.00 PO S 1200S 4 7 8" 4 3 4" 1000 25 73.00 $1,247.00 PO S 1200S 5" 4 7 8" 1000 25 74.00 $1,247.00 PO S 1200S 5 1 8" 5" 1000 25 76.00 $1,266.00 PO Pre-ssembled O.D. Tubing Clamp S 1200S 5 1 4" 5 1 8" 1000 25 77.00 $1,266.00 PO S 1200S 5 3 8" 5 1 4" 1000 25 78.00 $1,266.00 PO S 1200S 5 1 2" 5 3 8" 1000 25 79.00 $1,360.00 PO S 1200S 5 5 8" 5 1 2" 1000 25 88.00 $1,586.00 PO S 1200S 5 3 4" 5 5 8" 1000 25 90.00 $1,662.00 PO S 1200S 5 7 8" 5 3 4" 1000 25 92.00 $1,662.00 PO S 1200S 6" 5 7 8" 1000 25 94.00 $1,701.00 PO S 1200S 6 1 8" 6" 1000 25 96.00 $1,737.00 PO S 1200S 6 1 4" 6 1 8" 1000 25 98.00 $1,737.00 PO S 1200S 6 3 8" 6 1 4" 1000 25 99.00 $1,795.00 PO S 1200S 6 1 2" 6 3 8" 1000 25 100.00 $2,002.00 PO S 1200S 6 5 8" 6 1 2" 1000 25 102.00 $2,002.00 PO S 1200S 6 3 4" 6 5 8" 1000 25 104.00 $2,078.00 PO S 1200S 6 7 8" 6 3 4" 1000 25 106.00 $2,078.00 PO S 1200S 7" 6 7 8" 1000 25 108.00 $2,078.00 PO S 1200S 7 1 8" 7" 1000 25 110.00 $2,173.00 PO S 1200S 7 1 4" 7 1 8" 1000 25 112.00 $2,173.00 PO S 1200S 7 3 8" 7 1 4" 1000 25 114.00 $2,173.00 PO S 1200S 7 1 2" 7 3 8" 1000 25 116.00 $2,173.00 PO S 1200S 7 5 8" 7 1 2" 1000 25 117.00 $2,173.00 PO S 1200S 7 3 4" 7 5 8" 1000 25 119.00 $2,380.00 PO S 1200S 7 7 8" 7 3 4" 1000 25 121.00 $2,380.00 PO S 1200S 8" 7 7 8" 1000 25 123.00 $2,380.00 PO S 1200S 8 1 8" 8" 1000 25 125.00 $3,506.00 PO S 1200S 8 1 4" 8 1 8" 1000 25 126.00 $2,649.00 PO S 1200S 8 3 8" 8 1 4" 1000 25 128.00 $2,729.00 PO S 1200S 8 1 2" 8 3 8" 1000 25 129.00 $2,763.00 PO S 1200S 8 5 8" 8 1 2" 1000 25 130.00 $2,763.00 PO Sold in full box only. For Stainless Steel and Zinc Tri-valent Chromium, refer to page 62 in the Specialty Strut Section. 46 www.anvilintl.com
Price List...Sheet # S-3.11C Universal Pipe Clamp S 1300S Description Part No. Size O.D. Size Pre-ssembled Universal Clamp For EMT, IMC, GC, Pipe or O.D. Tube One Hole Clamp for O.D. Tubing pipe & conduit support Now only offered in Pre-ssembled Load Rating Std. Pkg. S 1300S 1 2" 0.706 to 0.840 250 100 10.00 $191.00 B S 1300S 3 4" 0.922 to 1.050 400 100 11.00 $211.00 B S 1300S 1" 1.163 to 1.315 400 100 12.00 $231.00 B S 1300S 1 1 4" 1.510 to 1.660 400 100 18.00 $250.00 B S 1300S 1 1 2" 1.740 to 1.900 500 50 20.00 $373.00 B S 1300S 2" 2.197 to 2.375 500 100 22.00 $403.00 B EG Pipe/Conduit Supports Fittings Nuts & Hardware Channel S 1450 Description Part No. Size Std. Pkg. One Hole Clamp for O.D. Tubing Use with 1 5 8" Wide Channel. S 1450 1 4" 100 4.00 $264.00 B S 1450 3 8" 100 5.00 $264.00 B S 1450 1 2" 100 6.00 $264.00 B S 1450 5 8" 100 8.00 $287.00 B S 1450 3 4" 100 9.00 $287.00 B S 1450 7 8" 50 10.00 $287.00 B S 1450 1" 50 11.00 $303.00 B EG Klo-Shure Concrete Inserts Specialty Strut Technical Data www.anvilintl.com 47
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C Roller Supports pipe & conduit support S 1901 S 1902 S 1911 Description Part No. Size Load Rating Std. Pkg. ( 1 2" 4" Pipe) Pipe Roller Support S 1901 - - 500 10 125.00 $7,608.00 D ( 1 2" 8" Pipe) Pipe Roller Support S 1902 1" 2" 6 3 4" 750 10 299.00 $7,263.00 D ( 1 2" 8" Pipe) Pipe Roller Support S 1902 2 1 2" 3 1 2" 7 1 2" 750 10 304.00 $7,263.00 D ( 1 2" 8" Pipe) Pipe Roller Support S 1902 4" 6" 8 1 2" 750 10 311.00 $7,460.00 D ( 1 2" 8" Pipe) Pipe Roller Support S 1902 8" 9 9 16" 750 10 319.00 $7,608.00 D Pipe Roller S 1911 2" 3 1 2" - 950 25 160.00 $8,590.00 D Pipe Roller S 1911 4" 6" - 950 20 215.00 $9,326.00 D Pipe Roller S 1911 8" 10" - 950-525.00 $16,570.00 D Pipe Roller S 1911 12" 14" - 950-1025.00 $37,541.00 D For dimension recommendations, see chart in the nvil Strut Engineering Catalog on page 87. One Piece Cable and Conduit Clamp S 3101 S 3115 Description Part No. Size Std. Pkg. One Piece Cable and Conduit Clamp S 3101 3 8" 100 6.00 $2,375.00 D One Piece Cable and Conduit Clamp S 3102 1 2" 100 7.00 $1,452.00 D One Piece Cable and Conduit Clamp S 3103 3 4" 100 12.00 $1,452.00 D One Piece Cable and Conduit Clamp S 3104 1" 100 15.00 $1,521.00 D One Piece Cable and Conduit Clamp S 3105 1 1 4" 100 19.00 $1,570.00 D One Piece Cable and Conduit Clamp S 3106 1 1 2" 100 20.00 $3,867.00 D One Piece Cable and Conduit Clamp S 3107 1 3 4" 100 25.00 $1,429.00 D One Piece Cable and Conduit Clamp S 3108 2" 100 35.00 $5,134.00 D One Piece Cable and Conduit Clamp S 3109 2 3 8" 75 41.00 $5,517.00 D One Piece Cable and Conduit Clamp S 3110 2 3 4" 75 60.00 $2,208.00 D One Piece Cable and Conduit Clamp S 3111 3 1 4" 75 64.00 $2,877.00 D One Piece Cable and Conduit Clamp S 3112 3 3 4" 50 91.00 $3,410.00 D One Piece Cable and Conduit Clamp S 3113 4" 40 100.00 $3,546.00 D One Piece Cable and Conduit Clamp S 3114 4 3 8" 30 115.00 $3,725.00 D One Piece Cable and Conduit Clamp S 3115 4 3 4" DISCONTINUED EG EG 48 www.anvilintl.com
Price List...Sheet # S-3.11C Hold Down Clamp S 3126 Description Part No. Size Hold Down Clamp pipe & conduit support Load Rating Std. Pkg. S 3126 1 2" 500 50 23.00 $832.00 B S 3126 3 4" 500 50 26.00 $908.00 B S 3126 1" 500 25 31.00 $982.00 B S 3126 1 1 4" 500 25 35.00 $1,001.00 B S 3126 1 1 2" 500 25 39.00 $1,040.00 B S 3126 2" 1000 25 94.00 $1,586.00 B S 3126 2 1 2" 1000 25 114.00 $1,737.00 B S 3126 3" 1000 25 133.00 $2,022.00 B S 3126 3 1 2" 1000 10 152.00 $2,305.00 B S 3126 4" 1000 BULK 176.00 $2,455.00 B S 3126 5" 1000 BULK 198.00 $3,212.00 B S 3126 6" 1000 BULK 225.00 $3,780.00 B EG Pipe/Conduit Supports Fittings Nuts & Hardware Channel Parallel Pipe Clamp S 3138 Description Part No. Size Parallel Pipe Clamp Load Rating Std. Pkg. S 3138 3 8" 300 50 27.00 $1,115.00 B S 3138 1 2" 300 50 29.00 $1,134.00 B S 3138 3 4" 300 50 30.00 $1,190.00 B S 3138 1" 400 50 31.00 $1,228.00 B S 3138 1 1 4" 400 50 38.00 $1,322.00 B S 3138 1 1 2" 500 50 40.00 $1,625.00 B S 3138 2" 500 25 47.00 $1,701.00 B S 3138 2 1 2" 500 25 66.00 $1,890.00 B S 3138 3" 500 25 78.00 $2,002.00 B S 3138 3 1 2" 500 25 87.00 $2,192.00 B S 3138 4" 500 25 90.00 $2,380.00 B EG Technical Data Specialty Strut Concrete Inserts Klo-Shure www.anvilintl.com 49
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C Cushion Strip S 3792 Description Part No. pipe & conduit support Std. Pkg. Ft. / Box Cushion Strip S 3792 20 253.00 $27,205.00 D Service Temperature 50 F to 275 F. Cushion Clamp ssembly S 004OD S 106P Pipe Series Description Part No. Pipe size Std. Pkg. EPDM EG/ZD Cushion Clamp ssembly S 009P 1 4" Pipe 25 13.00 $746.00 Cushion Clamp ssembly S 011P 3 8" Pipe 25 14.00 $776.00 Cushion Clamp ssembly S 014P 1 2" Pipe 25 15.00 $815.00 Cushion Clamp ssembly S 017P 3 4" Pipe 20 17.00 $873.00 Cushion Clamp ssembly S 021P 1" Pipe 20 19.00 $971.00 Cushion Clamp ssembly S 027P 1 1 4" Pipe 20 35.00 $1,364.00 Cushion Clamp ssembly S 030ODP 1 1 2" Pipe 20 39.00 $1,846.00 Cushion Clamp ssembly S 038ODP 2" Pipe 10 47.00 $2,366.00 Cushion Clamp ssembly S 046ODP 2 1 2" Pipe 5 55.00 $3,013.00 Cushion Clamp ssembly S 056ODP 3" Pipe 5 55.00 $0.00 Cushion Clamp ssembly S 064ODP 3 1 2" Pipe 5 88.00 $6,086.00 Cushion Clamp ssembly S 072ODP 4" Pipe 5 110.00 $8,030.00 Cushion Clamp ssembly S 089P 5" Pipe 5 130.00 $12,793.00 Cushion Clamp ssembly S 106P 6" Pipe 5 140.00 $17,398.00 Sold in full box only. Service Temperature: -65 F to 275 F. 50 www.anvilintl.com
Price List...Sheet # S-3.11C Cushion Clamp ssembly S 004OD S 106P pipe & conduit support Tube Series Description Part No. O.D. Size Std. Pkg. EG/ZD Cushion Clamp ssembly S 004OD 1 4" 25 10.00 $579.00 Cushion Clamp ssembly S 006ODN 3 8" 25 11.00 $579.00 Cushion Clamp ssembly S 008ODN 1 2" 25 13.00 $579.00 Cushion Clamp ssembly S 010ODN 5 8" 25 14.00 $598.00 Cushion Clamp ssembly S 012ODN 3 4" 25 14.00 $678.00 Cushion Clamp ssembly S 014ODN 7 8" 25 15.00 $795.00 Cushion Clamp ssembly S 016OD 1" 25 17.00 $815.00 Cushion Clamp ssembly S 018ODN 1 1 8" 20 18.00 $923.00 Cushion Clamp ssembly S 020OD 1 1 4" 20 18.00 $971.00 Cushion Clamp ssembly S 022ODN 1 3 8" 20 20.00 $1,099.00 Cushion Clamp ssembly S 024OD 1 1 2" 20 33.00 $1,168.00 Cushion Clamp ssembly S 026ODN 1 5 8" 20 35.00 $1,462.00 Cushion Clamp ssembly S 028OD 1 3 4" 20 37.00 $1,364.00 Cushion Clamp ssembly S 032OD 2" 10 41.00 $1,462.00 Cushion Clamp ssembly S 034OD 2 1 8" 10 46.00 $2,110.00 Cushion Clamp ssembly S 040OD 2 1 2" 10 49.00 $2,434.00 Cushion Clamp ssembly S 042OD 2 5 8" 5 51.00 $2,335.00 Cushion Clamp ssembly S 048OD 3" 5 57.00 $3,081.00 Cushion Clamp ssembly S 050OD 3 1 8" 5 60.00 $3,081.00 Cushion Clamp ssembly S 058OD 3 5 8" 5 70.00 $3,966.00 Cushion Clamp ssembly S 066OD 4 1 8" 5 94.00 $5,997.00 Cushion Clamp ssembly S 082OD 5 1 8" 5 125.00 $30,286.00 Cushion Clamp ssembly S 098OD 6 1 8" 5 130.00 $20,119.00 Sold in full box only. Service Temperature: -65 F to 275 F. Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel Technical Data www.anvilintl.com 51
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C klo-shure Klo-Shure Strut Mounted Insulation Couplings with Strut Clamp Klo-Shure Strut Mounted parts include the Klo-Shure Coupling, clamp halves with welded fastener and locknut. Used by permission. Description Klo-Shure Strut Mounted Coupling for 3 8" wall insulation Klo-Shure Strut Mounted Coupling for 1 2" wall insulation Part No. Klo-Shure ID C thickness Overall Dimension B Std. Pkg. Per 100 Pieces S 23025 1 4" ID 1.12 - $971.00 F S 23037 3 8" ID 1.25 - $1,070.00 F S 23050 1 2" ID 1.37 - $1,217.00 F S 23062 5 8" ID 1.50 - $1,316.00 F S 23075 3 4" ID 1.62 - $1,442.00 F S 23087 7 8" ID 1.75 - $1,550.00 F S 23100 1" ID 1.87 - $1,747.00 F S 23112 1 1 8" ID 2.00 - $1,846.00 F S 23137 1 3 8" ID 2.25 - $2,070.00 F S 23162 1 5 8" ID 2.50 - $2,886.00 F S 23212 2 1 8" ID 3.00 - $3,268.00 F S 24037 3 8" ID 1.50 - $1,316.00 F S 24050 1 2" ID 1.62 - $1,442.00 F S 24062 5 8" ID 1.75 - $1,550.00 F S 24075 3 4" ID 1.87 - $1,747.00 F S 24087 7 8" ID 2.00 - $1,846.00 F S 24100 1" ID 2.12 - $1,944.00 F S 24112 1 1 8" ID 2.25 - $2,070.00 F S 24137 1 3 8" ID 2.50 - $2,886.00 F S 24162 1 5 8" ID 2.75 - $3,112.00 F S 24212 2 1 8" ID 3.25 - $4,082.00 F S 24262 2 5 8" ID 3.75 - $5,437.00 F S 24312 3 1 8" ID 4.25 - $5,674.00 F S 24362 3 5 8" ID 4.75 - $7,941.00 F S 24412 4 1 8" ID 5.25 - $10,287.00 F Note: Klo-Shure ID equals copper tube OD. Chart indicates coupling sizes currently available from Klo-Shure. Service temperature -65 F to 275 F. 52 www.anvilintl.com
Price List...Sheet # S-3.11C klo-shure Klo-Shure Strut Mounted Insulation Couplings with Strut Clamp Description Klo-Shure Strut Mounted Coupling for 3 4" wall insulation Klo-Shure Strut Mounted Coupling for 1" wall insulation Klo-Shure Strut Mounted Coupling for 1 1 2" wall insulation Part No. Klo-Shure ID Overall Dimension Std. Pkg. Per 100 Pieces S 26025 1 4" ID 1.87 - $1,747.00 F S 26037 3 8" ID 2.00 - $1,846.00 F S 26050 1 2" ID 2.12 - $1,944.00 F S 26062 5 8" ID 2.25 - $2,070.00 F S 26075 3 4" ID 2.37 - $2,474.00 F S 26087 7 8" ID 2.50 - $2,866.00 F S 26112 1 1 8" ID 2.75 - $3,112.00 F S 26137 1 3 8" ID 3.00 - $3,268.00 F S 26162 1 5 8" ID 3.25 - $4,082.00 F S 26212 2 1 8" ID 3.75 - $5,437.00 F S 26262 2 5 8" ID 4.25 - $5,674.00 F S 26312 3 1 8" ID 4.75 - $7,941.00 F S 26362 3 5 8" ID 5.25 - $10,287.00 F S 26412 4 1 8" ID 5.75 - $16,438.00 F S 28062 5 8" ID 2.75 - $3,112.00 F S 28087 7 8" ID 3.00 - $3,268.00 F S 28112 1 1 8" ID 3.75 - $4,082.00 F S 28137 1 3 8" ID 3.50 - $4,181.00 F S 28162 1 5 8" ID 3.75 - $5,437.00 F S 28212 2 1 8" ID 4.25 - $5,585.00 F S 28262 2 5 8" ID 4.75 - $7,941.00 F S 28312 3 1 8" ID 5.25 - $10,287.00 F S 28362 3 5 8" ID 5.75 - $16,438.00 F S 29037 3 8" ID 3.50 10 $0.00 F S 29050 1 2" ID 3.62 10 $0.00 F S 29062 5 8" ID 3.75 10 $0.00 F S 29087 7 8" ID 4.00 10 $0.00 F S 29112 1 1 8" ID 4.25 10 $0.00 F S 29137 1 3 8" ID 4.50 10 $0.00 F S 29162 1 5 8" ID 4.75 10 $0.00 F S 29212 2 1 8" ID 5.25 10 $0.00 F S 29312 3 1 8" ID 6.25 10 $0.00 F Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel Note: Klo-Shure ID equals copper tube OD. Chart indicates coupling sizes currently available from Klo-Shure. Service temperature -65 F to 275 F. Technical Data www.anvilintl.com 53
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C klo-shure Klo-Shure Strut Mounted Insulation Couplings with Non Metallic Strut Clamp Klo-Shure lock top Strut Mounted parts include the Klo-Shure Coupling halves with non metal clamps. Used by permission. Description Klo-Shure Strut Mounted Coupling (Non Metallic) for 1 2" wall insulation Klo-Shure Strut Mounted Coupling (Non Metallic) for 3 4" wall insulation Klo-Shure Strut Mounted Coupling (Non Metallic) for 1" wall insulation Part No. Klo-Shure ID Overall Dimension Std. Pkg. Note: Klo-Shure ID equals copper tube OD. Chart indicates coupling sizes currently available from Klo-Shure. Service temperature -65 F to 275 F. Per 100 Pieces S 4050-PC 1 2" ID 1.62 25 $0.00 F S 4062-PC 5 8" ID 1.75 25 $0.00 F S 4087-PC 7 8" ID 2.00 25 $0.00 F S 4112-PC 1 1 8" ID 2.25 25 $0.00 F S 4137-PC 1 3 8" ID 2.50 25 $0.00 F S 4162-PC 1 5 8" ID 2.75 25 $0.00 F S 4212-PC 2 1 8" ID 3.25 25 $0.00 F S 6062-PC 5 8" ID 2.25 25 $0.00 F S 6087-PC 7 8" ID 2.50 25 $0.00 F S 6112-PC 1 1 8" ID 2.75 25 $0.00 F S 6137-PC 1 3 8" ID 3.00 25 $0.00 F S 8087-PC 7 8" ID 3.00 25 $0.00 F S 8112-PC 1 1 8" ID 3.25 25 $0.00 F S 8137-PC 1 3 8" ID 3.50 25 $0.00 F S 8162-PC 1 5 8" ID 3.75 25 $0.00 F S 8212-PC 2 1 8" ID 4.25 25 $0.00 F S 8262-PC 2 5 8" ID 4.75 25 $0.00 F 54 www.anvilintl.com
Price List...Sheet # S-3.11C Concrete Inserts Fig. 152 Fig. 285 Description Part No. Screw Concrete Insert (1) Fig. 152 Light Concrete Insert Fig. 285 (1) Specify Rod size. Size Range 3 8" thru 7 8". concrete inserts For prices, see nvil International Pipe Hanger List Price Sheet Channel Nuts & Hardware Fittings Continuous Concrete Inserts Description S 349 End Cap S 449 Continuous Concrete Insert with Closure Strip and End Cap Installed Continuous Concrete Insert with Foam and End Cap installed Continuous Concrete Insert without Closure Strip or End Cap Continuous Concrete Insert with Closure Strip and End Cap Installed Continuous Concrete Insert with Foam and End Cap installed Continuous Concrete Insert without Closure Strip or End Cap Part No. End Cap Dimensions Closure Strip Std. Pkg. Per 100 Feet PL PG S 349 CS/EC 10 1 5 8" x 1 3 8" x 12 Ga. 20 1793.00 $2,119.00 $2,202.00 E S 349 CS/EC 20 1 5 8" x 1 3 8" x 12 Ga. 20 3570.00 $2,141.00 $2,224.00 E S 349 F/EC 10 1 5 8" x 1 3 8" x 12 Ga. 10 188.00 $2,141.00 $2,224.00 E S 349 F/EC 20 1 5 8" x 1 3 8" x 12 Ga. 20 188.00 $2,160.00 $2,244.00 E S 349 W/O 10 1 5 8" x 1 3 8" x 12 Ga. 20 178.00 $1,993.00 $2,056.00 E S 349 W/O 20 1 5 8" x 1 3 8" x 12 Ga. 20 178.00 $2,014.00 $2,035.00 E S 449 CS/EC 10 1 5 8" x 1" x 12 Ga. 20 1519.00 $2,035.00 $2,141.00 E S 449 CS/EC 20 1 5 8" x 1" x 12 Ga. 20 3026.00 $2,056.00 $2,160.00 E S 449 F/EC 10 1 5 8" x 1" x 12 Ga. 10 162.00 $2,141.00 $2,224.00 E S 449 F/EC 20 1 5 8" x 1" x 12 Ga. 20 162.00 $2,160.00 $2,244.00 E S 449 W/O 10 1 5 8" x 1" x 12 Ga. 20 1507.00 $1,889.00 $1,950.00 E S 449 W/O 20 1 5 8" x 1" x 12 Ga. 20 3014.00 $1,909.00 $1,931.00 E Load rating 2,000 lbs. per 12" section, based upon concrete compressive strength of 2500 3000 PSI. Custom lengths available upon request. Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Technical Data www.anvilintl.com 55
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C End Cap nchor S 653 Description Part No. Std. Pkg. concrete inserts Type B End Cap nchor (1) S 653 50 18.00 $490.00 D Type B End Cap nchor (2) S 654 50 18.00 $490.00 D Concrete Deck Insert Fig. 284 Description Part No. Concrete Deck Insert Fig. 284 For prices, see nvil International Pipe Hanger List Price Sheet Size Range 3 8" thru 5 8" S 654 (1) Use With S 349 Insert. (2) Use With S 449 Insert. S 6151 Plastic Closure Strip S 6151 Description Part No. Std. Pkg. Plastic Closure Strip S 6151 10 100 47.00 $175.00 Use with all continuous inserts 10 ft. length PL PG 56 www.anvilintl.com
Price List...Sheet # S-3.11C S 200 Channel S 200 Part No. S 200 EH S 200 BTB Description specialty strut Std. Pkg. in Ft. Per 100 Feet SS ZTC HG S 200 10 SS/ZTC/HG Channel (1) 500 190.00 $3,435.00 $1,324.00 $1,815.00 S 200 20 SS/ZTC/HG Channel (1) 500 190.00 $3,435.00 $1,374.00 $1,815.00 S 200EH 10 SS/ZTC/HG Channel w/elongated Holes (1) (3) 500 185.00 $3,435.00 $1,031.00 $1,815.00 S 200EH 20 SS/ZTC/HG Channel w/elongated Holes (1) (3) 500 185.00 $3,435.00 $1,031.00 $1,815.00 S 200BTB 10 SS/ZTC/HG Welded Channel Solid (2) (4) 250 380.00 $7,608.00 $3,730.00 $4,122.00 S 200BTB 20 SS/ZTC/HG Welded Channel Solid (2) (4) 300 380.00 $7,608.00 $3,730.00 $4,122.00 S 200 BTB EH 10 SS/ZTC/HG Welded Channel w/elongated Holes (2) (3) (5) - 380.00 $0.00 $3,730.00 $0.00 S 200 BTB EH 20 SS/ZTC/HG Welded Channel w/elongated Holes (2) (3) (5) - 380.00 $0.00 $3,730.00 $0.00 SS - Type 304 Stainless. (1) 1 5 8" x 1 5 8" x 12 Ga. (2) 1 5 8" x 3 1 4" x 12 Ga. (3) 9 16" x 1 1 8" Elongated Holes on 2" Centers. (4) Two pieces S 200 Welded Back to Back. (5) Two pieces S 200EH Welded Back to Back. S 210 Channel 1 5 8" x 1 5 8" x 14 Ga. Pipe/Conduit Supports Fittings Nuts & Hardware Channel S 210 Part No. S 210 EH S 210 BTB Description Std. Pkg. in Ft. Per 100 Feet SS ZTC HG S 210 10 SS/ZTC/HG Channel (1) 500 141.00 $2,895.00 $1,178.00 PO S 210 20 SS/ZTC/HG Channel (1) 500 141.00 $2,895.00 $1,227.00 PO S 210EH 10 SS/ZTC/HG Channel w/elongated Holes (1) (3) 500 137.00 $2,895.00 $864.00 PO S 210EH 20 SS/ZTC/HG Channel w/elongated Holes (1) (3) 500 137.00 $2,895.00 $864.00 PO S 210BTB 10 SS/ZTC/HG Welded Channel (2) (4) 250 282.00 $6,625.00 PO PO S 210BTB 20 SS/ZTC/HG Welded Channel (2) (4) 300 282.00 $6,625.00 PO PO SS - Type 304 Stainless. (1) 1 5 8" x 1 5 8" x 14 Ga. (2) 1 5 8" x 3 1 4" x 14 Ga. (3) 9 16" x 1 1 8" Elongated Holes on 2" Centers. (4) Two pieces S 210 Welded Back to Back. S 500 Channel S 500 Part No. S 500 EH S 500 BTB Description Std. Pkg. in Ft. Per 100 Feet 1 5 8" x 13 16" x 14 Ga. SS ZTC HG S 500 10 SS/ZTC/HG Channel (1) 500 97.00 $2,209.00 $835.00 $933.00 S 500 20 SS/ZTC/HG Channel (1) 500 97.00 $2,209.00 $883.00 $933.00 S 500EH 10 SS/ZTC/HG Channel w/elongated Holes (1) (3) 500 87.00 $2,209.00 $678.00 $933.00 S 500EH 20 SS/ZTC/HG Channel w/elongated Holes (1) (3) 500 87.00 $2,209.00 $678.00 $933.00 S 500BTB 10 SS/ZTC/HG Welded Channel (2) (4) 250 194.00 $5,154.00 $3,013.00 $2,257.00 S 500BTB 20 SS/ZTC/HG Welded Channel (2) (4) 300 194.00 $5,154.00 $3,013.00 $2,257.00 SS - Type 304 Stainless. (1) 1 5 8" x 13 16" x 14 Ga. (2) 1 5 8" x 1 5 8" x 14 Ga. (3) 9 16" x 1 1 8" Elongated Holes on 2" Centers. (4) Two pieces S 500 Welded Back to Back. Technical Data Specialty Strut Concrete Inserts Klo-Shure www.anvilintl.com 57
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C Clamping Nuts S NS S RS S SS specialty strut Description Part No. Size Std. Pkg. Clamping Nut Without Spring (1) Clamping Nut With Regular Spring (2) Clamping Nut with Short Spring SS ZTC S NS 1 4" x 20 100 6.00 $1,667.00 $298.00 S NS 3 8" x 16 100 9.00 $1,746.00 $309.60 S NS 1 2" x 13 100 11.00 $1,825.00 $295.00 S NS 5 8" x 11 100 15.00 $0.00 $0.00 S NS 3 4" x 10 100 16.00 $0.00 $266.00 S RS 1 4" x 20 100 7.00 $1,227.00 $245.00 S RS 3 8" x 16-10.00 $1,570.00 $255.00 S RS 1 2" x 13-12.00 $1,717.00 $295.00 S RS 5 8" x 11 100 15.00 $0.00 $0.00 S RS 3 4" x 10 100 14.00 $0.00 $0.00 S SS 1 4" x 20 100 6.00 PO $242.00 C S SS 3 8" x 16 - - PO $328.00 C SS-Type 316 Stainless. Hot Dipped Galvanized available upon request. (1) Use with all 1 5 8" Wide Channel. (2) Use with S200, S210 and S300 Channel Plates and ngles S 601 S 602 S 603 S 604 S 605 S 606 S 607 S 611 S 613 S 616 Description Part No. Std. Pkg. Two Hole Splice Plate (1) S 601 50 38.00 $481.00 D Three Hole Splice Plate S 602 25 54.00 $827.00 D Two Hole End ngle (1) S 603 50 38.00 $510.00 D Two Hole Corner ngle (1) S 604 50 38.00 $510.00 D Three Hole Corner ngle (1) S 605 25 58.00 $815.00 D Three Hole Corner ngle (1) S 606 25 58.00 $913.00 D Four Hole Corner ngle (1) S 607 25 78.00 $963.00 D Z Support (2) S 611 50 55.00 $1,255.00 D U Support (2) S 613 25 88.00 $1,473.00 D Four Hole Splice Clevis (3) S 616 10 265.00 $3,494.00 D (1) For load rating, see nvil Strut Engineering Catalog, page 92. (2) Use with S 200, S 210 and S 500 BTB. (3) Use with S 200 and S 210. ZTC 58 www.anvilintl.com
Price List...Sheet # S-3.11C Square Washer 1 5 /8 " 1 5 /8 " S 619 Bolt Bolt Size Size specialty strut Channel Nuts & Hardware Description Part No. Std. Pkg. Square Washer SS - Type 304 Stainless ngle Connectors reversible strut 4 5 /8 " S 624 9 /16 " dia. holes S 200 S 651 Description Part No. Reversible Strut Bracket Mounted on 12 Ga. Channel S 633 SS ZTC S 619 1 4" 100 18.00 PO $303.00 S 619 3 8" 100 18.00 $1,607.80 $196.00 S 619 1 2" 100 17.00 $1,607.80 $206.00 S 619 5 8" 100 16.00 $1,607.80 $226.00 S 619 3 4" 100 15.00 $0.00 $275.00 S 646 Description Part No. ngle Std. Pkg. Uniform Load Std. Pkg. Two Hole Closed ngle Connector S 624 45 25 58.00 $1,403.00 D Two Hole Open ngle Connector S 633 45 25 58.00 $981.00 D Four Hole Splice Clevis S 646-10 176.00 $3,299.00 D ZTC S 651 12" 600 BULK 293.00 $6,940.00 D S 651 18" 400 BULK 401.00 $9,228.00 D S 651 24" 300 BULK 509.00 $9,094.00 D ZTC Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings www.anvilintl.com 59
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C Connectors S 665 S 720 Description S 666 S 667 S 668 S 669 S 679 S 745 specialty strut Part No. Uniform Load Std. Pkg. Four Hole Double Corner Connector S 665 25 76.00 $1,550.00 D Six Hole Double Corner Connector S 666 25 115.00 $1,962.00 D Eight Hole Double Corner Connector S 667 10 155.00 $2,699.00 D Six Hole Three ngle Connector S 668 10 113.00 $2,699.00 D Twelve Hole Three ngle Clevis Connector S 669 10 230.00 $3,023.00 D U Support (1) S 679 25 128.00 $1,825.00 D Beam Clamp S 686-26.00 $759.00 D Cross Plate S 712 10 105.00 $1,825.00 D T Plate S 714 25 80.00 $1,717.00 D Flat ngle Plate S 718 50 58.00 $1,364.00 D RH ngle Plate Connector S 720 RH 25 55.00 $2,110.00 D LH ngle Plate Connector S 720 LH 25 55.00 $2,110.00 D Three Hole Corner ngle S 745-58.00 $836.00 D Double Channel Bracket 12" S 809 2000 (3) - 502.00 $14,028.00 D Double Channel Bracket 18" S 809 1300 (3) - 692.00 $18,405.00 D Double Channel Bracket 24" S 809 1000 (3) - 882.00 $19,627.00 D Eight Hole Double ngle Connector S 821 10 150.00 $2,699.00 D Four Hole Splice Plate S 888 25 78.00 $1,091.00 D Ten Hole Two ngle Clevis Connector S 913 10 193.00 $3,396.00 D RH Two Hole Single Corner ngle Connector S 922 RH 20 60.00 $1,865.00 D LH Two Hole Single Corner ngle Connector S 922 LH 20 60.00 $1,865.00 D Five Hole Two ngle Connector S 923 25 93.00 $1,923.00 D Z Support (2) S 928 50 47.00 $1,354.00 D U Support (2) S 929 25 71.00 $1,473.00 D S 686 S 809 S 821 S 888 S 913 S 922 S 923 S 928 S 929 (1) Use with S 100, S 200 BTB, S 210 BTB. (2) Use with S 500 and S 520. (3) Uniform Load Mounted on 12 Ga. Channel. S 712 S 714 S 718 ZTC 60 www.anvilintl.com
Price List...Sheet # S-3.11C Conduit Clamps pre-assembled S 1100 S Description Part No. Size Pre-ssembled Rigid Steel Conduit Clamps specialty strut Now only offered in Pre-ssembled O.D. Size Load Rating Std. Pkg. SS ZTC S 1100S 1 2" 0.840 400 100 11.00 $1,119.00 $466.00 S 1100S 3 4" 1.050 600 100 15.00 $1,188.00 $491.00 S 1100S 1" 1.315 600 100 17.00 $1,295.00 $515.00 S 1100S 1 1 4" 1.660 600 100 19.00 $1,442.00 $525.00 S 1100S 1 1 2" 1.900 800 50 29.00 $2,375.00 $550.00 S 1100S 2" 2.375 800 50 34.00 $2,630.00 $574.00 S 1100S 2 1 2" 2.875 800 50 40.00 $2,905.00 $682.00 S 1100S 3" 3.500 800 50 47.00 $3,238.00 $751.00 S 1100S 3 1 2" 4.000 1000 25 62.00 $4,516.00 $1,173.00 S 1100S 4" 4.500 1000 25 67.00 $5,242.00 $1,212.00 S 1100S 5" 5.563 1000 25 80.00 $0.00 $2,115.00 S 1100S 6" 6.625 1000 25 102.00 $0.00 $2,273.00 S 1100S 8" 8.625 1000 25 1300.00 $0.00 $2,307.00 S 1100S 10" 12.750 1000 25 1430.00 $0.00 $3,401.60 lso for IMC and GRC. SS - Type 304 Stainless. Sold in full box only. Hot Dipped Galvanized and luminum available upon request. Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel Technical Data Specialty Strut Concrete Inserts www.anvilintl.com 61
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data Price List...Sheet # S-3.11C O.D. Tubing Clamp pre-assembled S 1200 S O.D. Tubing Clamp Description Part No. Size O.D. Tubing Clamp SS - Type 304 Stainless specialty strut Now only offered in Pre-ssembled Tube Size Load Rating Std. Pkg. SS ZTC S 1200S 1 4" 1 8" 400 100 8.00 $936.00 $403.00 S 1200S 3 8" 1 4" 400 100 8.00 $967.00 $413.00 S 1200S 1 2" 3 8" 400 100 9.00 $997.00 $417.00 S 1200S 5 8" 1 2" 400 100 10.00 $1,027.00 $422.00 S 1200S 3 4" 5 8" 400 100 11.00 $1,088.00 - S 1200S 7 8" 3 4" 400 100 12.00 $1,147.00 $451.00 S 1200S 1" 7 8" 600 100 14.00 $1,420.00 - S 1200S 1 1 8" 1" 600 100 15.00 $1,450.00 $471.00 S 1200S 1 1 4" 1 1 8" 600 100 16.00 $1,540.00 $491.00 S 1200S 1 3 8" 1 1 4" 600 100 17.00 $1,555.00 - S 1200S 1 1 2" 1 3 8" 600 100 18.00 $1,615.00 - S 1200S 1 5 8" 1 1 2" 600 100 19.00 $1,661.00 $491.00 S 1200S 1 3 4" 1 5 8" 800 50 29.00 $2,582.00 - S 1200S 1 7 8" 1 3 4" 800 50 28.00 $2,673.00 $864.00 S 1200S 2" 1 7 8" 800 50 31.00 $2,763.00 - S 1200S 2 1 8" 2" 800 50 32.00 $2,929.00 $883.00 S 1200S 2 1 4" 2 1 8" 800 50 33.00 $2,959.00 - S 1200S 2 3 8" 2 1 4" 800 50 34.00 $3,035.00 $893.00 S 1200S 2 1 2" 2 3 8" 800 50 35.00 $3,126.00 - S 1200S 2 5 8" 2 1 2" 800 50 37.00 $3,186.00 $913.00 S 1200S 2 3 4" 2 5 8" 800 50 38.00 $3,307.00 - S 1200S 2 7 8" 2 3 4" 800 50 40.00 $3,367.00 $0.00 S 1200S 3" 2 7 8" 800 50 41.00 $3,428.00 - S 1200S 3 1 8" 3" 800 50 43.00 $3,488.00 $953.00 S 1200S 3 1 4" 3 1 8" 800 50 45.00 $3,579.00 - S 1200S 3 3 8" 3 1 4" 800 50 46.00 $3,685.00 - S 1200S 3 1 2" 3 3 8" 800 50 47.00 $3,744.00 - S 1200S 3 5 8" 3 1 2" 800 25 56.00 $4,862.00 $1,962.00 S 1200S 3 3 4" 3 5 8" 800 25 58.00 $4,893.00 - S 1200S 3 7 8" 3 3 4" 1000 25 60.00 $4,983.00 - S 1200S 4" 3 7 8" 1000 25 62.00 $5,089.00 - S 1200S 4 1 8" 4" 1000 25 62.00 $5,165.00 $2,012.00 S 1200S 4 1 4" 4 1 8" 1000 25 64.00 $5,225.00 $0.00 S 1200S 4 3 8" 4 1 4" 1000 25 66.00 $5,331.00 $0.00 S 1200S 4 1 2" 4 3 8" 1000 25 67.00 $5,481.00 $0.00 62 www.anvilintl.com
Price List...Sheet # S-3.11C Beam Clamp S 2651 Description Part No. specialty strut Load Rating Std. Pkg. Beam Clamp (1) S 2651 T1 3 3 8" 1000 25 80.00 $1,619.00 D Beam Clamp (2) S 2651 T2 5" 1000 25 80.00 $1,668.00 D (1) Use with S 200, S 210, S 300, S 400, S 500, S 520. (2) Use with S 100, S 150, and S 200BTB. ZTC Channel Nuts & Hardware Fittings Post Bases and ngle Brackets S 3033 S 3064 S 3373 Description Part No. Std. Pkg. Post Base (1) S 3033 10 373.00 $5,399.00 D Post Base (1) S 3033 SQ 10 373.00 $0.00 D Double Column Post Base (2) S 3064 10 408.00 $6,136.00 D Universal ngle Bracket (3) S 3373 25 134.00 $2,037.00 D (1) Use with S 200 and S 210. (2) Use with all 3 1 4" Channels. (3) For load rating, see nvil Strut Engineering Catalog, page 92. Seismic Rod Stiffener S 3500 Description Part No. Size Std. Pkg. ZTC ZTC Seismic Rod Stiffener S 3500 3 8" - 5 8" 25 16.00 $1,717.00 C Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports www.anvilintl.com 63