Homepage > Producten > Luchtroosters > Lijnroosters > Pureline18 PURELINE18 PARTICULARLY SLIM DIFFUSER FACE, AVAILABLE IN NUMEROUS VARIANTS FOR MANY DIFFERENT INSTALLATION SITUATIONS Slot diffusers with 18 mm diffuser face (nominal width) and adjustable air control elements Nominal length 600 2000 mm (length of air control element 100 mm), 1 or 2 slots Volume flow rate range 5 84 l/s or 17 302 m³/h Individually adjustable air control elements for horizontal, angled or vertical air discharge One-way or alternating air discharge meets individual local requirements Uniform air pattern reduces contamination of the ceiling due to the induction of room air Air control elements have grooves that allow for precise positioning Optional equipment and accessories Attractive appearance due to extruded aluminium sections with anodised finish or powder coating Symmetric or asymmetric position of plenum box Plenum box with lining End plates, end angles, corner sections Different looks due to choice of black, grey or white air control elements
APPLICATION Application Type PureLine18 slot diffusers are used as supply air or extract air devices in comfort zones Particularly unobtrusive diffuser due to its sleek design Installation into suspended ceilings For room heights up to 4 m (lower edge of suspended ceiling) For suspended ceilings; suitable for restricted ceiling voids due to the low overall height of the plenum box Suitable for continuous linear arrangement Adjustable air control elements allow for horizontal, angled or vertical air discharge Mixed flow system with one-way or alternating air discharge, can be adapted to the building structure High induction results in a rapid reduction of the temperature difference and airflow velocity (supply air variant) For variable and constant volume flows For supply air to room air temperature differences from 10 to +10 K Special characteristics Uniform air pattern reduces contamination of the ceiling due to the induction of room air Horizontal, angled or vertical air discharge by means of manually adjustable air control elements Comfortable indoor air climate due to high induction and rapid reduction of temperature differences and airflow velocities High-quality look thanks to anodised extruded aluminium sections (E6-C-0, natural colour) or powder coating (RAL CLASSIC colour) Diffuser face has been optimised for maximum volume flow rate at low sound power levels Suitable for continuous linear arrangement Nominal sizes L : 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, N
1900, 2000 mm Diffuser face also available in intermediate sizes DESCRIPTION Variants PL18-*: 1 or 2 slots PL18-*-DF: Diffuser face with spring clip PL18-*-DS: Diffuser face with extended border (B00) and screw fixing PL18-*-PB: Plenum box for screw fixing PL18-*-PF: Diffuser face and plenum box, non-detachable fixing PL18-*-SF: Diffuser face and plenum box, detachable fixing PL18-*-CS: Corner section Position of plenum box on the front diffuser Central position On the left (LE) On the right (RI) Plenum box variant Symmetric position of plenum box, side entry spigot (HS) Symmetric position of plenum box, top entry spigot (VS) Asymmetric position of plenum box, side entry spigot (HA) Construction Diffuser face finish Anodised, E6-C-0, natural colour P1: Powder-coated RAL 9010, pure white, gloss level 50% P1: Powder-coated RAL 9006, white aluminium, gloss level 30% P1: Powder-coated in any other RAL CLASSIC colour, gloss level 70% Attachments
D: Damper blade for volume flow rate balancing LS: Lip seal L: Internal insulation EP: Two end plates EA: Two end angles Single diffusers are factory fitted with end plates or end angles. Accessories EP: Two end plates EA: Two end angles For a continuous linear arrangement the end plates or end angles have to be ordered separately and fitted by others. Construction features Spigot suitable for circular ducts to EN 1506 or EN 13180 4 suspension points for on-site installation (by others) The manually adjustable air control elements have grooves that make it easier to adjust the elements and lock them in the required position Spigot with groove for lip seal (if accessory with lip seal has been ordered) Diffuser face sizes from 600 to 2000 mm, in increments of 1 mm Plenum boxes are only available in nominal lengths Materials and surfaces Diffuser face made from extruded aluminium sections Air control elements made of ABS plastic, UL 94, V-0, flame retardant Plenum box made of galvanised sheet steel End plates and end angles made of aluminium Lip seal made of rubber Lining is mineral wool with vinyl closed cell foam Diffuser face with anodised finish, E6-C-0, natural colour P1: Powder-coated, RAL CLASSIC colour Air control elements similar to RAL 9005, black G: Air control elements similar to RAL 9006, grey W: Air control elements similar to RAL 9010, white
Mineral wool Where the mineral wool comes into contact with air, it is faced with glass fibre fabric as a protection against abrasion due to airflow velocities up to 20 m/s To EN 13501, fire rating class A1, non-combustible RAL quality mark RAL-GZ 388 Biosoluble and hence hygienically safe according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EC Inert to fungal and bacterial growth Standards and guidelines Sound power level of the air-regenerated noise measured according to EN ISO 5135 Maintenance Maintenance-free as construction and materials are not subject to wear Inspection and cleaning to VDI 6022 TECHNISCHE INFORMATIE Function, Technical data, Quick sizing, Specification text, Order code FUNCTION Functional description Slot diffusers direct the air from air conditioning systems into the room, either horizontally, at an angle or vertically. The resulting airflow induces high levels of room air, thereby rapidly reducing the airflow velocity and the temperature difference between supply air and room air. The result is a mixed flow ventilation in comfort zones, with good overall room ventilation, creating only very little turbulence in the occupied zone.
Type PureLine18 slot diffusers are factory fitted with manually adjustable air control elements. The air pattern can be adjusted to meet different local requirements. Air discharge is one-way or alternating horizontal. Other patterns: heating mode with vertical air discharge; angled air discharge. The supply air to room air temperature difference may range from 10 to +10 K. A damper blade (optional) simplifies volume flow rate balancing for commissioning. To give rooms an aesthetic, uniform look, PureLine18 diffusers may also be used for extract air. Schematic illustration of PL18-*-SF
1 Diffuser face, 1 slot or 2 slots 2 Adjustable air control element 3 Screw fixing 6 Neck 7 Plenum box 8 Suspension lug 9 Spigot Optional
4 End plate 5 End angle 10 Lip seal Damper blade for volume flow rate balancing Alternating horizontal air discharge
Alternating angled air discharge (AS) Setting of the air control elements
Air discharge: horizontal left Setting of the air control elements
Air discharge: horizontal right Alternating angled air discharge Alternating angled air discharge (AS)
Setting of the air control elements
Air discharge: angled right Setting of the air control elements
Air discharge: angled left Vertical air discharge Vertical air discharge (V)
Setting of the air control elements
Air discharge: vertical One-way horizontal air discharge to the left One-way horizontal left (HL)
Setting of the air control elements
Air discharge: horizontal left One-way horizontal air discharge to the right One-way horizontal right (HR)
Setting of the air control elements
Air discharge: horizontal right TECHNICAL DATA Nominal length 600 2000 mm, in increments of 100 mm Number of slots 1 or 2 Minimum volume flow rate, with Δt = 10 K z 5 l/s or 17 m³/h Maximum volume flow rate, with L 50 db(a) 84 l/s or 302 m³/h WA Supply air to room air temperature difference 10 to +10 K QUICK SIZING Quick sizing tables provide a good overview of the volume flow rates and corresponding sound power levels and differential pressures. Exact values for all parameters can be determined with our Easy Product Finder design programme. Up to nominal length 1500 mm, sizing includes one spigot; from length 1600 mm, two spigots are required. PL18-1, supply air, alternating horizontal air discharge, sound power level and total differential pressure Nominal length Nominal length V V Damper blade position 0 45 90 D = 78 D = 98 D = 78 D = 98 D = 78 D = 98 Δpt LWA Δpt LWA Δpt LWA Δpt LWA Δpt LWA Δpt LWA Nominal length l/s m³/h Pa db(a) Pa db(a) Pa db(a) Pa db(a) Pa db(a) Pa db(a) 600 5 17 4 <15 3 <15 5 <15 4 <15 8 <15 5 <15 10 38 15 29 14 26 21 29 16 26 35 29 22 26 600 16 58 34 40 31 38 49 41 37 38 81 41 50 38 22 78 62 49 57 46 88 49 67 46 148 49 91 46 6 20 4 <15 3 <15 6 <15 4 <15 10 <15 6 <15
700 12 42 14 29 13 26 22 29 16 26 39 30 23 27 700 18 63 32 40 28 38 49 41 35 38 89 41 51 38 24 85 57 48 51 46 88 49 63 46 159 49 91 46 800 6 23 4 <15 3 <15 6 <15 4 <15 12 <15 7 <15 13 46 14 29 12 27 23 30 16 27 44 30 24 27 800 19 69 31 40 27 38 51 41 35 38 98 41 54 38 26 92 54 48 47 46 91 49 61 46 173 49 94 46 900 7 26 4 <15 4 <15 7 <15 5 <15 14 <15 7 <15 14 50 14 30 12 27 25 30 16 27 50 31 26 28 900 21 75 30 41 25 38 54 41 35 38 109 41 57 38 28 99 52 48 44 46 95 49 61 46 190 49 99 46 1000 8 29 4 <15 4 <15 8 <15 5 <15 16 <15 8 <15 15 54 14 30 11 27 27 30 17 28 56 31 28 28 1000 22 80 29 41 24 38 57 41 35 38 119 41 60 38 29 105 51 48 41 45 99 49 60 46 206 49 104 46 1100 9 32 5 <15 4 <15 9 <15 6 <15 19 <15 10 <15 16 58 14 30 11 28 29 31 17 28 62 31 30 28 1100 24 85 29 41 23 38 60 41 36 38 130 42 64 38 31 111 50 48 39 45 104 49 61 46 224 49 109 46 10 35 5 <15 4 <15 10 15 6 <15 22 16 11 <15 1200 17 62 14 31 11 28 31 31 18 28 69 32 33 29
1200 25 90 29 41 23 38 64 41 37 38 143 42 68 39 33 117 50 48 38 45 109 49 62 46 243 49 115 46 1300 11 38 5 16 4 <15 11 16 6 <15 25 17 12 <15 18 66 15 31 11 28 34 32 19 29 77 32 36 29 1300 26 95 30 41 22 38 69 41 38 38 156 42 73 39 34 123 50 48 37 45 116 49 64 46 263 49 123 46 1400 11 41 6 16 4 <15 13 17 7 <15 29 17 13 <15 19 70 15 31 11 28 36 32 20 29 84 32 39 29 1400 27 99 30 41 22 38 73 41 39 38 168 42 77 39 36 128 50 48 36 45 121 49 65 46 281 49 129 46 1500 12 44 6 17 4 <15 14 18 8 <15 33 18 15 15 20 74 16 32 11 29 40 32 21 29 93 33 42 30 1500 29 104 31 41 22 38 78 42 41 39 183 42 83 39 37 134 51 48 36 45 129 49 67 46 304 49 137 46 1600 13 47 4 <15 3 <15 6 <15 4 <15 12 <15 7 <15 24 86 12 30 11 28 20 31 14 28 38 31 21 28 1600 35 125 25 41 22 38 42 41 29 38 80 41 44 39 46 164 43 48 37 46 72 49 49 46 138 49 75 46 1700 14 49 4 <15 3 <15 7 <15 5 <15 13 <15 7 <15 25 90 12 31 10 28 21 31 14 28 40 31 22 28 36 130 25 41 21 38 43 41 28 38 84 42 45 39 1700
47 170 42 48 36 46 74 49 48 46 144 49 77 46 1800 15 52 4 <15 4 <15 7 15 5 <15 14 16 7 <15 26 94 12 31 10 28 22 31 14 28 43 32 23 29 1800 37 135 25 41 21 38 44 41 29 38 89 42 46 39 49 176 41 48 35 46 75 49 48 46 151 49 79 46 1900 15 55 4 15 4 <15 8 16 5 <15 15 16 8 <15 27 98 12 31 10 28 22 31 14 29 46 32 24 29 1900 39 140 24 41 20 38 46 41 29 38 93 42 48 39 51 182 41 48 34 46 77 49 48 46 158 49 81 46 2000 16 58 4 16 4 <15 8 16 5 <15 16 17 8 <15 28 101 12 31 10 28 23 32 14 29 48 32 24 29 2000 40 144 24 41 20 38 47 41 29 38 97 42 49 39 52 187 40 48 33 45 78 49 48 46 164 49 82 46 PL18-2, supply air, alternating horizontal air discharge, sound power level and total differential pressure Nominal length Nominal length V V Damper blade position 0 45 90 D = 98 D = 123 D = 98 D = 123 D = 98 D = 123 Δpt LWA Δpt LWA Δpt LWA Δpt LWA Δpt LWA Δpt LWA Nominal length l/s m³/h Pa db(a) Pa db(a) Pa db(a) Pa db(a) Pa db(a) Pa db(a) 600 10 35 4 <15 4 <15 6 <15 4 <15 11 <15 6 <15 19 67 13 28 11 26 21 29 15 26 37 30 21 27 600 27 98 28 39 24 36 46 40 31 37 81 41 46 38 36 130 49 47 42 44 79 48 54 45 141 49 79 45
700 11 41 4 <15 4 <15 7 <15 5 <15 13 <15 7 <15 21 74 13 29 11 26 23 30 15 27 43 31 23 27 700 30 108 27 39 22 36 48 40 31 37 90 41 48 38 39 141 46 47 38 44 82 48 52 44 155 49 82 45 800 13 47 5 <15 4 <15 9 <15 5 <15 16 16 9 <15 23 81 13 29 11 26 25 31 15 27 49 32 25 28 800 32 116 26 39 21 36 51 40 31 37 100 42 51 38 42 151 44 47 35 43 85 48 51 44 169 49 85 45 900 15 52 5 15 4 <15 10 16 6 <15 20 18 10 <15 25 89 14 30 10 27 28 31 16 27 56 32 28 28 900 35 125 26 39 20 36 54 41 31 37 111 42 54 38 45 161 44 46 33 43 90 48 52 44 185 49 90 45 1000 16 58 6 16 4 <15 12 18 7 <15 24 19 12 15 27 95 14 30 10 27 30 32 17 28 64 33 30 29 1000 37 133 27 39 19 36 58 41 32 37 123 42 58 38 47 170 43 46 31 43 95 48 52 44 201 49 95 45 1100 18 64 6 18 4 <15 13 19 7 15 28 20 13 16 28 102 14 31 10 27 33 32 18 28 71 34 33 29 1100 39 140 27 39 19 36 62 41 33 37 134 42 62 38 49 178 43 46 30 43 100 48 53 44 216 49 100 45 19 70 7 19 5 15 15 20 8 16 33 22 15 18 1200
30 109 15 31 10 28 36 33 19 29 79 34 36 30 1200 41 147 27 40 18 36 66 41 34 37 146 43 66 38 52 186 43 46 29 43 105 48 54 44 232 49 105 45 1300 21 76 7 20 5 16 17 21 9 17 38 23 17 19 32 115 16 31 10 28 40 33 20 29 88 35 39 30 1300 43 155 28 40 18 36 71 41 36 37 158 43 71 39 54 194 44 46 29 43 112 48 56 44 249 49 111 45 1400 23 81 8 21 5 17 20 22 10 18 44 24 20 20 34 121 17 32 11 28 43 33 21 30 97 35 43 31 1400 45 161 29 40 18 36 75 41 37 37 170 43 75 39 56 201 45 46 28 42 117 48 57 44 265 49 117 45 1500 24 87 8 22 5 18 22 23 11 19 50 25 22 21 35 128 17 32 11 29 47 34 22 30 106 35 46 31 1500 47 168 30 40 18 36 80 42 39 38 183 43 80 39 58 208 46 46 28 42 123 48 59 44 281 49 123 45 1600 26 93 5 17 4 <15 9 18 5 <15 16 19 9 15 42 152 12 31 9 28 22 32 13 28 43 33 22 29 1600 59 211 22 40 17 37 42 41 25 37 83 42 42 38 75 270 36 47 28 44 68 48 41 44 135 49 68 45 27 99 5 18 4 <15 9 19 6 15 18 20 9 16 1700 44 159 12 31 9 28 23 32 14 28 46 33 23 29
61 218 22 40 17 37 43 41 25 37 87 42 43 38 1700 77 278 35 46 27 43 70 48 41 44 140 49 69 45 1800 29 105 5 18 4 15 10 20 6 16 20 21 10 17 46 165 12 31 9 28 24 32 14 29 49 34 24 30 1800 63 226 22 40 17 37 45 41 26 37 92 42 45 38 80 287 35 46 26 43 72 48 41 44 147 49 72 45 1900 31 111 5 19 4 16 11 20 6 17 22 22 11 18 48 172 12 31 9 28 25 33 14 29 52 34 25 30 1900 65 234 22 40 16 37 46 41 26 38 96 43 46 39 82 295 35 46 26 43 74 48 41 44 153 49 73 45 2000 32 116 6 20 4 16 12 21 7 17 24 22 12 18 50 178 12 32 9 28 26 33 15 29 56 34 26 30 2000 67 240 22 40 16 37 48 41 26 38 100 43 48 39 84 302 34 46 25 43 75 48 41 44 159 49 75 45 SPECIFICATION TEXT Slot diffusers of Type PL18, with individually manually adjustable air control elements and 1 or 2 slots. Air discharge can be alternating horizontal, alternating angled, vertical, one-way horizontal to the left or one-way horizontal to the right. The slot diffusers are intended to be installed in suspended ceilings and are suitable for supply air and extract air. Ready-toinstall component which consists of a diffuser face with a choice of black, grey or white air control elements. Variants with plenum box have 1 or 2 spigots; symmetrically positioned plenum boxes may have side entry or top entry spigots, while asymmetrically positioned plenum boxes have only side entry spigots. The plenum boxes are fitted with 4 suspension lugs.
The diffuser face fixing can be detachable or non-detachable. Spigots are suitable for circular ducts according to EN 1506 or EN 13180. The sound power level of air-regenerated noise is measured according to EN ISO 5135. Special characteristics Uniform air pattern reduces contamination of the ceiling due to the induction of room air Horizontal, angled or vertical air discharge by means of manually adjustable air control elements Comfortable indoor air climate due to high induction and rapid reduction of temperature differences and airflow velocities High-quality look thanks to anodised extruded aluminium sections (E6-C-0, natural colour) or powder coating (RAL CLASSIC colour) Diffuser face has been optimised for maximum volume flow rate at low sound power levels Suitable for continuous linear arrangement Materials and surfaces Diffuser face made from extruded aluminium sections Air control elements made of ABS plastic, UL 94, V-0, flame retardant Plenum box made of galvanised sheet steel End plates and end angles made of aluminium Lip seal made of rubber Lining is mineral wool with vinyl closed cell foam Diffuser face with anodised finish, E6-C-0, natural colour P1: Powder-coated, RAL CLASSIC colour Air control elements similar to RAL 9005, black G: Air control elements similar to RAL 9006, grey W: Air control elements similar to RAL 9010, white Mineral wool Where the mineral wool comes into contact with air, it is faced with glass fibre fabric as a protection against abrasion due to airflow velocities up to 20 m/s To EN 13501, fire rating class A1, non-combustible RAL quality mark RAL-GZ 388 Biosoluble and hence hygienically safe according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EC Inert to fungal and bacterial growth
Construction Diffuser face finish Anodised, E6-C-0, natural colour P1: Powder-coated RAL 9010, pure white, gloss level 50% P1: Powder-coated RAL 9006, white aluminium, gloss level 30% P1: Powder-coated in any other RAL CLASSIC colour, gloss level 70% Technical data Nominal length: 600 2000 mm, in increments of 100 mm Number of slots: 1 or 2 Minimum volume flow rate, with Δt = 10 K: 5 l/s or 17 m³/h Maximum volume flow rate, with L 50 db(a): 84 l/s or 302 m³/h Supply air to room air temperature difference: 10 to +10 K z WA Sizing data V [m³/h] Δp [Pa] t Air-regenerated noise L [db(a)] WA This specification text describes the general properties of the product. Texts for variants can be generated with our Easy Product Finder design programme. ORDER CODE Order example: PL18-1-S-PF-HS/1200x1200x98/1
Number of slots 1 System Supply air Variant Diffuser face fixed to the plenum box, non-detachable Plenum box variant Symmetric position of plenum box, side entry spigot Nominal size Diffuser face 1200 mm, plenum box 1200 mm, spigot diameter 98 mm No. of spigots 1 Damper blade for volume flow rate balancing Without Lip seal Without Lining Without Position of plenum box Central position Air pattern Alternating horizontal Extended border Without End pieces Without Surface Anodised, E6-C-0, natural colour Colour of air control elements Black Order example: PL18-2-S-SF-HS/1200x1000x123/2-D-LS-L-LE/AS/B00/EA/P1-RAL 9010/W
Number of slots 2 System Supply air Variant Diffuser face fixed to the plenum box, detachable Plenum box variant Symmetric position of plenum box, side entry spigot Nominal size Diffuser face 1200 mm, plenum box 1000 mm, spigot diameter 123 mm No. of spigots 2 Damper blade for volume flow rate balancing With Lip seal With Lining With Position of plenum box Left side Air pattern Alternating angled Extended border With End pieces With end angle Surface Powder-coated RAL 9010, pure white, gloss level approx. 50% Colour of air control elements White Order example: PL18-2-S-DF/1200/V/B00/EP/P1-RAL 9006/G
Number of slots 2 System Supply air Variant Diffuser face with extended border and spring clip Plenum box variant No plenum box Nominal size Diffuser face 1200 mm No. of spigots Without Damper blade for volume flow rate balancing Without Lip seal Without Lining Without Position of plenum box No plenum box Air pattern Vertical Extended border With extended border End pieces With end plate Surface Powder-coated RAL 9006, white aluminium, gloss level approx. 30% Colour of air control elements Grey Order example: PL18-2- -CS/150x300x90/B00/RAL 9016
Number of slots 2 Variant Corner section Dimensions Leg length E: 150 mm; leg length F: 300 mm; 90 angle Extended border With extended border (B00) Surface P1: Powder-coated RAL 9016, traffic white, gloss level approx. 70% Type PureLine18 Slot diffuser Damper blade for volume flow rate balancing No entry: none Number of slots 1 1 slot 2 2 slots System D LS With damper blade Lip seal No entry: none With lip seal S E Supply air Extract air Plenum box lining No entry: none Variant L With DF DS Diffuser face with extended border (B00) and spring clip Diffuser face with extended border (B00) and fixing screws Position of plenum box No entry: centre Plenum box LE RI Left side Right side PB PF Plenum box only Diffuser face fixed to the plenum box, non-detachable Air pattern (100 mm air control element) SF Diffuser face fixed to the plenum box, detachable (only with B00) Plenum box variant AS HL No entry: alternating horizontal Alternating angled Horizontal left
HS Symmetric position of plenum box, side entry spigot HR Horizontal right VS Symmetric position of plenum box, top entry spigot V Vertical HA Asymmetric position of plenum box, side entry spigot Extended border Nominal size [mm] No entry: none Diffuser face x Plenum box x Spigot diameter B00 With (B00) Nominal size LN 600 700 800 900 1000 EP EA End pieces No entry: none End plate End angle 1100 1200 1300 1400 Surface No entry: anodised, E6-C-0, natural colour P1 Powder-coated, specify RAL CLASSIC colour 1500 1600 1700 1800 1900 2000 W G Colour of air control elements No entry: similar to RAL 9005, black Similar to RAL 9010, white Similar to RAL 9006, grey Plenum box LN 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000
Spigot diameter ØD 78 With 1 slot 98 With 1 or 2 slots 123 With 2 slots No. of spigots 1 1 spigot 2 2 spigot Type Dimensions [mm] PureLine18 Slot diffuser E 100 to 300 mm (in increments of 1 mm) Number of slots 1 1 slot 2 2 slots System Note: no entry required Variant F 100 to 300 mm (in increments of 1 mm) W 45 to 175 (in increments of 1 ) Extended border No entry: none B00 With (B00) Surface No entry: anodised, E6-C-0, natural colour CS Corner section P1 Powder-coated, specify RAL CLASSIC colour Colour of air control elements No entry: similar to RAL 9005, black W Similar to RAL 9010, white G Similar to RAL 9006, grey Variants, Dimensions and weight
VARIANTS Asymmetrically positioned plenum box DIMENSIONS AND WEIGHT Nominal length
Nominal length L₁ mm 600 600 700 700 800 800 900 900 1000 1000 1100 1100 1200 1200 1300 1300 1400 1400 1500 1500 1600 1600 1700 1700 1800 1800 1900 1900 2000 2000 Variant
With extended border Variant P Variant mm PL18-1 38 PL18-2 55 Dimensions [mm] Nominal length L₁ L₃ 600 600 595 700 700 695 800 800 795 900 900 895 1000 1000 995 1100 1100 1095 1200 1200 1195 1300 1300 1295 1400 1400 1395 1500 1500 1495 1600 1600 1595 1700 1700 1695 1800 1800 1795 1900 1900 1895 2000 2000 1995
Variant Variant B3 H4 R M A O PL18-1-HS / HA 70 120 100 18 110 PL18-2-HS / HA 100 150 115 35 140 PL18-1-VS 138 150 18 178 PL18-2-VS 138 150 35 178 PL18-1-PF-HA 54 PL18-2-PF-HA 67 PL18-1-SF-HA 50 PL18-2-SF-HA 63 Variant Variant D C PL18-1 78 42 98 50 PL18-2 98 50 123 48 Weights
Plenum box variant Diffuser face Variant kg/m PL18-1 0.5 PL18-2 0.8 Plenum box HS/HA PL18-1 2.4 PL18-2 3.4 Plenum box VS PL18-1 2.9 PL18-2 2.8 Total weight = weight of diffuser face + weight of plenum box Variant Variant Variant Without extended border With extended border P mm PL18-1 18 38 PL18-2 35 55 E F W Min. entry value 100 100 45 Max. entry value 300 300 175 Variant
Without extended border With extended border Variant P Variant mm PL18-1 18 38 PL18-2 35 55 End angles on both ends Without end piece
PL18-1 profile PL18-2 profile
PL18-1/B00 profile
PL18-2/B00 profile
PL18-1-*-DF (diffuser face with spring clip)
PL18-2-*-DF (diffuser face with spring clip)
Plenum box with side entry spigot (HS / HA)
Plenum box with top entry spigot (VS)
Plenum box fixing points
Spigot arrangement
* only with construction VS Note: Plenum box with choice of 1 spigot or 2 spigots. PL18-*-HS (symmetric position of plenum box, side entry spigot)
Illustration shows PL18-1-HS PL18-*-HA (asymmetric position of plenum box, side entry spigot)
Illustration shows PL18-1-HA PL18-*-VS (symmetric position of plenum box, top entry spigot)
Illustration shows PL18-1-VS PL18-*-CS
End plate EP
Profile without extended border End plate EP
Profile with extended border End angle EA Profile without extended border End angle EA
Profile with extended border Installation examples, Installation details, Commissioning, Basic information and nomenclature
INSTALLATION EXAMPLES PL18-1/.../B00, installation in continuous ceilings Anodised, E6-C-0, natural colour INSTALLATION DETAILS Installation and commissioning For room heights up to 4 m (lower edge of suspended ceiling) Flush ceiling installation Horizontal or vertical duct connection If (L₃+ 5) < L, the plenum box can be positioned to the left, to the right or in the centre. 1 For a continuous linear arrangement connect the diffusers with alignment plates If necessary, carry out volume flow rate balancing with the damper blade Fixing material for fixing the slot diffusers is to be provided by others
These are only schematic diagrams to illustrate installation details. PL plenum box, positioned on the left, in the centre, on the right Suspension
PL18-DF spring clip fixing If ceiling thickness is > 9 mm PL18-DF spring clip fixing If ceiling thickness is 9 mm Continuous ceiling
Rectangular panels
PL18 with detachable diffuser face fixing
Continuous linear arrangement
Each slot diffuser (without end pieces) is supplied with two alignment plates Fitting corner sections
COMMISSIONING Volume flow rate balancing When several diffusers are connected to just one volume flow controller, it may be necessary to balance the volume flow rates. Slot diffusers with plenum box and damper blade (variant -D): The damper blade can be adjusted even after the diffuser face has been installed. Volume flow rate balancing
Home Contacten Imprint Leverings- en betalingsvoorwaarden Privacy Disclaimer 17-01-2018 TROX Nederland B.V.
Homepage > Producten > Luchtroosters > Lijnroosters > Pureline18 Move the air control element near the spigots in such a way that it is possible to insert a screw driver BASIC INFORMATION AND NOMENCLATURE Principal dimensions ØD [mm] Outer diameter of the spigot L₁ [mm] Length of diffuser without end pieces L₃ [mm] Length of plenum box P [mm] Width of diffuser face with extended border, if any B₃ [mm] Width of plenum box H₃ [mm] Height of slot diffuser with plenum box, from the lower edge of the suspended ceiling to the upper edge of the plenum box Y [mm] Neck extension The neck length results from a fixed length plus the neck extension A [mm] Position of the spigot, defined by the distance of the spigot centre line to the lower edge of the suspended ceiling C [mm] Length of the spigot m [kg] Home Contacten Imprint Leverings- en betalingsvoorwaarden Privacy Disclaimer 17-01-2018 TROX Nederland B.V.
Homepage > Producten > Luchtroosters > Lijnroosters > Pureline18 Weight Nomenclature L [db(a)] WA A-weighted sound power level of air-regenerated noise V [m³/h] and [l/s] Volume flow rate Δt [K] z Supply air to room air temperature difference, i.e. supply air temperature minus room temperature Δp [Pa] t Total differential pressure A [m²] eff Effective air discharge area All sound power levels are based on 1 pw. Home Contacten Imprint Leverings- en betalingsvoorwaarden Privacy Disclaimer 17-01-2018 TROX Nederland B.V.
Homepage > Producten > Luchtroosters > Lijnroosters > Pureline18 TROX Nederland B.V. Online-Services Service-Hotlines Orderstatus (My TROX-NET) Uw contactpersoon Online service contact formulier Aanvraag prijslijst TROX klimaat TROX Nederland B.V. Tel.: +31 (0)183 767 300 Fax : +31 (0)183 767 399 Contact Veersteeg 11, 4212 LR Spijk Postbus 225, 4200 AE Gorinchem Tel.: +31 (0)183 767300 Fax.: +31 (0)183 767399 Email: trox@trox.nl Levertijden: productietijd+2 werkdagen Home Contacten Imprint Leverings- en betalingsvoorwaarden Privacy Disclaimer 17-01-2018 TROX Nederland B.V.