H1 AI NOZZLES & OUN GILLES Table of Contents AI NOZZLES & OUN GILLES PN This round punkah nozzle features a surface mounting frame. PN This round punkah nozzle features a stub duct mounting frame. PN This round punkah nozzle features a stub duct mounting frame for smaller duct work. PN2P This product features a surface mounting frame with two round punkah nozzles. PN4P This product features a surface mounting frame with four round punkah nozzles. PNLP This product features a layin Tbar frame with one round punkah nozzle. KJET This round jet nozzle mounts to a ceiling tile and supplies a nonadjustable jet of air. CN, CN These concentric ring nozzles feature a stub duct mounting frame for smaller duct work CNP, CNP These products feature a surface mounting frame with two round concentric ring nozzles. CNLP, CNLP This product features a layin Tbar frame with one round concentric ring nozzle, These round single and double deflection grilles feature a concealed mounting frame., These round single and double deflection grilles feature a round duct adapter frame., These round single and double deflection grilles feature a duct reducing mounting frame for smaller duct work. PN Series Introduction & imensional Information...H13 eference Chart & Performance ata...h1 Engineering Specifications...H11 KJET, KJETA Introduction...H112 imensional Information...H113 eference Chart... H113 Performance ata...h114 Engineering Specifications...H116 CN, CN Series Introduction & imensional Information...H117 eference Chart...H123 Performance ata...h124 Engineering Specifications...H129, Series Introduction & imensional Information...H131 eference Chart...H134 Performance ata...h13 Engineering Specifications...H139 EGC Series Introduction & imensional Information...H141 eference Chart...H144 Performance ata...h14 Engineering Specifications...H149 KJET This round jet nozzle mounts to a ceiling tile and supplies a nonadjustable jet of air. EGC These round eggcrate grilles feature a round duct adapter. CN, CN These concentric ring nozzles feature a surface mounting frame. EGC These round eggcrate grilles feature a duct reducing mounting frame for smaller duct work. CN, CN These concentric ring nozzles feature a stub duct mounting frame. EGC These round eggcrate grilles feature a duct reducing mounting frame for smaller duct work. KUEGE 212 H12 www.kruegerhvac.com Excellence in Air istribution
AI NOZZLES & OUN GILLES H1, ound Single, ouble eflection Introduction:, esigned for surface mount applications, this high capacity series of architectural grilles provide an air stream that can be fully adjusted from a concentrated jet to a robust, widespread air pattern. MOELS Aluminum, ound Single eflection, Concealed Mount Aluminum, ound ouble eflection, Concealed Mount FEATUES Aluminum construction. ound single () or double () deflection airfoil blade grille with 1 blade spacing. Easy finger tip adjustment. For use in surface mount applications. Flex duct mounting frame available. Concealed mounting system standard. FINISHES Standard finish is #7 Silver Metallic. Optional finishes available., imensional Information *Shown without concealed mounting ring. 1/2 (13) (Face & Side View), FACE AN SIE VIEWS, FACE AN SIE VIEWS *Shown without concealed mounting ring. 1 (2) 1/2 (13) 1 (2) BLAE AI NOZZLES & OUN GILLES 1 (2) P MINUS 1 (2) P MINUS 2 9/16 (6) 2 9/16 (6) KUEGE 212, IMENSIONAL ETAILS, IMENSIONAL ETAILS Nominal P Nominal P 6 6" (12) 1/4'' (21) 6 6" (12) 1/4'' (21) '' (23) 1 1/4'' (26) '' (23) 1 1/4'' (26) 1 1'' (24) 12 1/4'' (311) 1 1'' (24) 12 1/4'' (311) 12 12'' (3) 14 1/4'' (362) 12 12'' (3) 14 1/4'' (362) 14 14'' (36) 16 1/4'' (413) 14 14'' (36) 16 1/4'' (413) 16 16'' (46) 1 1/4'' (464) 16 16'' (46) 1 1/4'' (464) 1 1'' (47) 2 1/4'' (14) 1 1'' (47) 2 1/4'' (14) 2 2'' () 22 1/4'' (6) 2 2'' () 22 1/4'' (6) 22 22'' (9) 24 1/4'' (616) 22 22'' (9) 24 1/4'' (616) 24 24'' (61) 26 1/4'' (667) 24 24'' (61) 26 1/4'' (667) NOTE: imensions in parentheses are mm. Providing You With Air istribution Solutions H131
H1 AI NOZZLES & OUN GILLES, ound Single, ouble eflection Introduction:, esigned to fit cleanly over the end of spiral or round duct work, this high capacity series of grilles feature an integrated round duct adaptor, which works great in exposed duct applications. MOELS Aluminum, ound Single eflection, ound Adaptor Aluminum, ound ouble eflection, ound Adaptor AI NOZZLES & OUN GILLES (Face & Side View), imensional Information 1 (2) FEATUES Aluminum construction. ound single () or double () deflection airfoil blade grille with 1 blade spacing. Easy finger tip adjustment. For use in exposed duct mount applications. Frame slides cleanly over end of exposed duct. FINISHES Standard finish is #7 Silver Metallic. Optional finishes available., FACE AN SIE VIEWS, FACE AN SIE VIEWS 1 (2) 1 (2) 1 (2) BLAE 1 (2) 1 (2) P C PLUS 1/ (3) C PLUS 1/ (3) 3 1/16 3 1/16, IMENSIONAL ETAILS, IMENSIONAL ETAILS Nominal * Core C P NOTES: imensions in parentheses are mm. * The nominal size is 2 (1) smaller than the duct size to which it mounts. Example: A size 1 mounts on a 12 (3) duct. H132 6 7/'' (149) '' (23) 1/4'' (21) 7 7/'' (2) 1'' (24) 1 1/4'' (26) 1 9 7/'' (21) 12'' (3) 12 1/4'' (311) 12 11 7/'' (32) 14'' (36) 14 1/4'' (362) 14 13 7/'' (32) 16'' (46) 16 1/4'' (413) 16 1 7/'' (43) 1'' (47) 1 1/4'' (464) 1 17 7/'' (44) 2'' () 2 1/4'' (14) 2 19 7/'' () 22'' (9) 22 1/4'' (6) 22 21 7/'' (6) 24'' (61) 24 1/4'' (616) 24 23 7/'' (66) 26'' (66) 26 1/4'' (667) www.kruegerhvac.com Excellence in Air istribution Nominal * Core C P 6 7/'' (149) '' (23) 1/4'' (21) 7 7/'' (2) 1'' (24) 1 1/4'' (26) 1 9 7/'' (21) 12'' (3) 12 1/4'' (311) 12 11 7/'' (32) 14'' (36) 14 1/4'' (362) 14 13 7/'' (32) 16'' (46) 16 1/4'' (413) 16 1 7/'' (43) 1'' (47) 1 1/4'' (464) 1 17 7/'' (44) 2'' () 2 1/4'' (14) 2 19 7/'' () 22'' (9) 22 1/4'' (6) 22 21 7/'' (6) 24'' (61) 24 1/4'' (616) 24 23 7/'' (66) 26'' (66) 26 1/4'' (667) KUEGE 212
AI NOZZLES & OUN GILLES H1, ound Single, ouble eflection Introduction:, This series of grilles feature an integrated round duct reducer designed to fit cleanly inside the end of spiral or round duct runs, which makes it a great choice for exposed duct applications. MOELS Aluminum, ound Single eflection, ound educer Aluminum, ound ouble eflection, ound educer FEATUES Aluminum construction. ound single () or double () deflection airfoil blade grille with 1 blade spacing. Easy finger tip adjustment. For use in exposed duct mount applications. Frame slides cleanly into end of exposed duct. FINISHES Standard finish is #7 Silver Metallic. Optional finishes available., imensional Information (Face & Side View), FACE AN SIE VIEWS, FACE AN SIE VIEWS 1 (2) 1 (2) 1 (2) AI NOZZLES & OUN GILLES 1 (2) P MINUS 1/ (3) 1 (2) P MINUS 1/ (3) 1 (2) BLAE 2 13/16 (71) 3 13/16 (97) 2 13/16 (71) 3 13/16 (97) KUEGE 212, IMENSIONAL ETAILS, IMENSIONAL ETAILS Nominal P Nominal P 6 6" (12) 1/4'' (21) 6 6" (12) 1/4'' (21) '' (23) 1 1/4'' (26) '' (23) 1 1/4'' (26) 1 1'' (24) 12 1/4'' (311) 1 1'' (24) 12 1/4'' (311) 12 12'' (3) 14 1/4'' (362) 12 12'' (3) 14 1/4'' (362) 14 14'' (36) 16 1/4'' (413) 14 14'' (36) 16 1/4'' (413) 16 16'' (46) 1 1/4'' (464) 16 16'' (46) 1 1/4'' (464) 1 1'' (47) 2 1/4'' (14) 1 1'' (47) 2 1/4'' (14) 2 2'' () 22 1/4'' (6) 2 2'' () 22 1/4'' (6) 22 22'' (9) 24 1/4'' (616) 22 22'' (9) 24 1/4'' (616) 24 24'' (61) 26 1/4'' (667) 24 24'' (61) 26 1/4'' (667) NOTE: imensions in parentheses are mm. Providing You With Air istribution Solutions H133
H1 AI NOZZLES & OUN GILLES, Series ound Single, ouble eflection,,,,, Series eference Chart AIFLOW VS. NC:,,,,, AI NOZZLES & OUN GILLES Airflow (CFM) 4 46 44 42 4 3 36 34 32 3 2 26 24 22 2 1 16 14 12 1 6 4 2 2 22 24 26 2 3 32 34 36 3 4 Sound Level, NC Nominal 24 22 2 1 16 14 12 1 6 H134 www.kruegerhvac.com Excellence in Air istribution KUEGE 212
,,, Supply Performance ata AI NOZZLES & OUN GILLES H1, Series ound Single, ouble eflection KUEGE 212 IP ATA:,,, Area Vel. Air Flow egrees 1egrees 3egrees Pt Throw Pt Throw Pt Throw NC Octave Band in ft 2 FPM CFM WG ft WG ft WG ft 2 3 4 6 7 6.196.34 1.4 12.7 14 1.6 16 1.39 1 1.766 2 2.1 22 2.63 24 3.139 49 9.37 9 13 2.47 11 1.67 7 1 16 3 2 919 1.146 16 2 2.17 1 1 2.269 13 16 23 16 43 37 32 27 23 14 122 24.26 19 23 32.333 17 21 29.479 1 19 26 26 49 44 41 37 34 2 131 3.46 21 2 36.2 19 23 33.74 17 21 3 3 3 49 4 4 43 39 13 36.3 23 2 39.746 21 2 36 1.74 19 23 32 41 7 4 4 1 4 2 17.44 12 19 2.6 11 16 2. 9 14 23 33 23 13 6 3.12 21 2 36.164 1 23 33.236 16 21 3 14 44 36 3 26 2 121 42.27 2 3 43.329 22 27 39.473 2 2 3 27 4 41 3 34 27 177.43 2 34 49.1 2 31 44.793 23 2 4 36 1 46 44 4 17 63.6 3 37 2.724 27 33 47 1.41 2 3 43 41 4 1 49 47 3.2 17 2 36.67 14 22 33.97 12 19 3 36 26 17 11 72 47.131 26 32 4.16 23 29 41.242 2 26 37 1 4 3 31 27 21 11 1193 6.246 31 37 3.31 2 34 4.44 2 31 43 27 1 4 41 37 34 26 146.373 34 42 9.47 31 3 3.67 2 34 4 34 1 4 4 42 37 13 1.3 3 47 66.746 34 42 6 1.74 31 3 4 42 6 6 2 1 4 1 4.4 1 27 42. 16 24 3.3 14 2 34 36 2 1 796 62.11 29 37 2.141 2 33 47.22 21 3 43 13 44 36 29 24 1 13.23 3 43 61.26 32 39.374 29 3 24 1 44 39 3 3 22 193 12.439 42 2 74.62 3 47 67.9 3 43 6 3 4 2 4 46 41 174 14.1 4 7.7 41 7 1.1 37 4 64 42 6 6 2 47 62 6. 23 3 1.7 2 3 46.11 17 26 42 39 29 19 13 19 7.116 34 44 62.149 29 39 6.214 2 36 1 46 3 31 26 2 93 1.167 39 4 67.214 3 43 61.3 3 39 21 43 37 32 27 1 141 1.364 47 2.467 43 2 74.671 39 47 67 3 7 2 49 46 43 37 16 1.491 1 62.629 46 6.9 42 1 72 4 6 6 4 1 4 44 3 7. 2 3 7.64 22 33 2.92 19 2 47 39 29 1 12 717 1.9 34 47 66.114 29 42 6.164 2 3 4 11 44 36 2 22 16 13 14.174 4 7.223 41 7.321 3 4 64 23 1 44 3 34 29 19 1362 19.321 2 64 91.411 47 2.91 43 3 74 34 7 2 4 44 41 34 1649 23.47 71 1.62 2 64 9.67 47 2 4 61 6 4 1 4 44 66 1.6 3 4 66.71 26 3 6.12 22 33 4 41 31 21 1 736 13.94 39 3 7.12 33 4 6.173 29 43 61 12 46 37 29 24 17 96 16.142 4 9 3.12 41 3 7.262 3 4 6 2 42 36 31 2 1 137 24.333 9 73 13.427 4 66 93.614 49 6 4 3 3 49 46 42 36 1699 3. 66 1 114.64 6 73 13.92 4 66 93 42 62 6 3 46 12.2 32 4 72.67 2 41 6.97 24 36 9 41 31 21 14 734 16.93 43 9 3.119 37 3 7.172 32 4 6 13 47 3 3 24 1 917 2.146 3 66 93.17 46 6 4.26 4 4 76 21 1 43 37 32 27 16 1193 26.246 61 7 16.31 6 96.44 61 7 3 6 4 41 37 29 16 34.421 7 6 121.39 63 7 11.776 7 7 99 4 61 6 4 47 42 69 1.6 36 4 1.72 31 47 73.13 27 4 66 42 32 22 16 7 2.99 4 66 93.127 42 6 4.13 36 4 76 14 4 39 31 26 2 94 2.1 6 74 14.199 2 67 94.26 4 6 22 2 4 39 34 2 1 1327 3.3 71 7 123.39 64 79 111.61 71 11 3 9 3 49 4 42 3 116 4.39 76 93 132.1 69 4 119.733 62 76 1 39 62 6 4 47 41 73 1.7 4 6.73 34 1.1 3 44 72 43 33 23 17 76 24.11 3 72 12.13 46 6 92.16 39 9 3 1 49 4 32 27 2 96 3.1 66 1 114.22 7 73 13.291 49 66 93 23 3 46 39 3 29 19 1274 4.21 76 93 132.36 69 4 119.1 62 76 1 34 9 3 49 4 41 33 129 4.4 3 12 144.1 7 92 13.746 6 3 11 4 62 7 4 1 4 42 NOTES: NC values are based on octave band 2 7 sound power levels minus a room absorption 1dB, re 1 12 Watts. ash in space denotes a NC value less than 1. ata was obtained from tests conducted in accordance with ANSI/ASHAE Standard 7. Throw values are given for terminal velocities of 1, 1, and FPM (.7,., and.2 m/s). Throw data assumes a free jet. For entrained jets, throw increases by approximately 3%. AI NOZZLES & OUN GILLES Providing You With Air istribution Solutions H13
H1 AI NOZZLES & OUN GILLES, Series ound Single, ouble eflection,,, Supply Performance ata AI NOZZLES & OUN GILLES METIC ATA:,,, Area Vel. Air Flow egrees 1egrees 3egrees Pt Throw Pt Throw Pt Throw NC Octave Band cm m 2 m/s L/s Pa m Pa m Pa m 2 3 4 6 7 1.1 2.32 2.1 3.73 36.99 41.13 46.164 1.23 6.24 61.292 2.33 43 9.1 2.7 4. 6. 11.6 2.3 3..4 16. 2. 3. 4.9 3 2 4.67 36.4 4.9 6.. 46.6 4.4.4 7.7 67. 4. 4.9 7. 16 43 37 32 27 23 14 6.22 113 64.7.7 6.9 9. 2..1 6.3.9 119.2 4.6.7. 26 49 44 41 37 34 2 7.7 142 11.1 6.3 7. 11. 129.4.7 7. 9.9 16.2.2 6.3 9. 3 3 49 4 4 43 39 9.32 17 14.1 6.9. 12. 1. 6.3 7.7 1.9 267.3.7 6.9 9. 41 7 4 4 1 4 2. 3 1. 3..7.4 13.9 3.2 4.9 7.6 2. 2. 4.2 6.9 33 23 13 4.37 142 31.9 6.3 7.7 11. 4..6 7. 9.9.7 4. 6.3 9. 14 44 36 3 26 2 6.19 21 64. 7. 9.2 13. 2. 6..3 11. 117.9 6.2 7. 1.7 27 4 41 3 34 27.1 26 17.2.6 1. 14. 137.2 7.7 9. 13.4 197.4 7..6 12.1 36 1 46 44 4 9.1 297 14.7 9.2 11.2 1.9 1.2.3 1.2 14.4 29.2 7. 9.2 13. 41 4 1 49 47 2. 142 13.1.1 7.6 11. 16.7 4.4 6. 9.9 24.1 3..6 9. 36 26 17 11 4.43 224 32.7. 9.7 13. 41.9 6.9. 12. 6.3 6.. 11.3 1 4 3 31 27 21 11 6.6 37 61.3 9.3 11.4 16.1 7..4 1.3 14.6 112.9 7.6 9.3 13.2 27 1 4 41 37 34 26 7.46 37 92.9 1.3 12.6 17.9 11.9 9.3 11.4 16.2 171.1. 1.4 14.6 34 1 4 4 42 37 9.32 472 14.1 11. 14.1 2. 1. 1.4 12. 1.1 267.3 9. 11.6 16.4 42 6 6 2 1 4 2.9 19 11.2..3 12.6 14.3 4. 7.2 11.4 2.6 4.1 6.2 1.4 36 2 1 4. 29 27.3.7 11.2 1. 3. 7. 1.1 14.3.4 6.4 9.2 12.9 13 44 36 29 24 1. 41.6 1.6 13. 1.4 64. 9.6 11. 16.7 93.1.7 1.7 1.1 24 1 44 39 3 3 22.9 9 19.3 12.9 1. 22.4 14. 11.7 14.3 2.2 21.4 1.6 12.9 1.3 3 4 2 4 46 41 9.6 661 137.1 13.7 16.7 23.7 17.7 12.4 1.1 21.4 22.7 11.2 13.7 19.4 42 6 6 2 47 2. 23 13.6 7.1 1.6 1. 17.4 6.1 9.1 14. 2.1.3 7.9 12.7 39 29 19 13 4.16 413 2.9 1.3 13.2 1.7 37..9 12. 16.9 3.3 7.7 1. 1.3 1 46 3 31 26 2 4.99 496 41.6 11. 14. 2. 3.3 1.7 13.1 1. 76.7 9.2 11.9 16. 21 43 37 32 27 1 7.37 732 9.7 14.4 17.6 24.9 116.2 13. 1.9 22. 167.2 11. 14.4 2.4 3 7 2 49 46 43 37.6 122.4 1. 19. 26. 16.7 14. 17.2 24.3 22. 12.7 1. 22. 4 6 6 4 1 4 44 2.73 34 12. 7.7 11. 17.3 16. 6.6 9.9 1.7 22.9.7.6 14.2 39 29 1 12 3.64 472 22.1 1.2 14.1 2. 2.4. 12. 1.1 4. 7.6 11.4 16.4 11 44 36 2 22 16.1 661 43.4 13.7 16.7 23.7.6 12.4 1.1 21.4. 1.7 13.7 19.4 23 1 44 3 34 29 19 6.92 97 79.9 1.9 19. 27.6 12.4 14.4 17.6 24.9 147.3 13. 16. 22.6 34 7 2 4 44 41 34.37 1 117.1 17. 21.4 3.3 1. 1. 19.4 27.4 21. 14.3 17.6 24. 4 61 6 4 1 4 44 2. 472 13. 9. 13.6 2. 17.7 7. 11.7 1.1 2. 6.7 1.1 16.4 41 31 21 1 3.74 614 23.4 11. 16.1 22. 29.9 1.1 14.6 2.6 43..7 13.1 1.7 12 46 37 29 24 17 4.6 7 3.4 14. 17.9 2.3 4.3 12. 16.2 22.9 6.2 1. 14.6 2.7 2 42 36 31 2 1 7. 116 3. 1.1 22.1 31.3 16.3 16.4 2. 2.3 12.9 14. 1.1 2.6 3 3 49 46 42 36.63 1416 124.4 2. 24. 34.6 19.3 1.1 22.2 31.3 229.2 16.4 2.1 2.4 42 62 6 3 46 2. 66 13.1 9.7 14.6 21.9 16.7.4 12.6 19. 24.1 7.2 1. 17.9 41 31 21 14 3.73 7 23.2 13. 17.9 2.3 29.7 11.2 16.2 22.9 42. 9.6 14. 2.7 13 47 3 3 24 1 4.66 944 36.3 16.2 2. 2.3 46. 14. 1.1 2.6 66. 12.1 16.4 23.2 21 1 43 37 32 27 16 6.6 1227 61.3 1.6 22. 32.2 7. 16. 2.6 29.2 112.9 1.2 1.7 26.4 3 6 4 41 37 29 7.92 16 14. 21.3 26.1 36.9 134.3 19.3 23.6 33.4 193.1 17.4 21.4 3.2 4 61 6 4 47 42 2.9 7 13.9 11. 16. 24. 17. 9. 14.2 22.2 2.7.2 12.3 2.1 42 32 22 16 3. 944 24. 14.7 2. 2.3 31.7 12.7 1.1 2.6 4.6 1.9 16.4 23.2 14 4 39 31 26 2 4.1 11 3.7 1.3 22.4 31.6 49.6 1. 2.2 2.6 71.3 13.6 1.3 2.9 22 2 4 39 34 2 1 6.74 162 7.9 21.6 26. 37.4 97.2 19. 23.9 33.9 139. 17.7 21.7 3.6 3 9 3 49 4 42 3 7.7 1 99.1 23.1 2.3 4. 126.9 2.9 2.6 36.2 12.6 1.9 23.2 32. 39 62 6 4 47 41 2.91 14.2 12.1 1.1 26. 1.1 1.4 1.6 24.3 26.1 9. 13. 22. 43 33 23 17 3. 1133 2.2 16.1 21.9 31. 32.3 13.9 19. 2. 46.4 12. 17.9 2.4 1 49 4 32 27 2 4. 1416 39.4 2. 24. 34.6.4 17.4 22.2 31.3 72. 1. 2.1 2.4 23 3 46 39 3 29 19 6.47 1 7. 23.1 2.3 4. 9.6 2.9 2.6 36.2 12.9 1.9 23.2 32. 34 9 3 49 4 41 33 7.77 226 1. 2.3 31. 43. 129.1 22.9 2. 39.7 1.6 2.7 2.4 3.9 4 62 7 4 1 4 42 NOTES: NC values are based on octave band 2 7 sound power levels minus a room absorption 1dB, re 1 12 Watts. ash in space denotes a NC value less than 1. ata was obtained from tests conducted in accordance with ANSI/ASHAE Standard 7. Throw values are given for terminal velocities of 1, 1, and FPM (.7,., and.2 m/s). Throw data assumes a free jet. For entrained jets, throw increases by approximately 3%. KUEGE 212 H136 www.kruegerhvac.com Excellence in Air istribution
, Supply Performance ata AI NOZZLES & OUN GILLES H1, ound Single, ouble eflection KUEGE 212 IP ATA:, Area Nom. Vel. Air Flow egrees 1egrees 3egrees Pt Throw Pt Throw Pt Throw NC Octave Band in ft 2 in FPM CFM WG ft WG ft WG ft 2 3 4 6 7.349 6 1.4 12.7 1 14 1.6 12 16 1.39 14 1 1.766 16 2 2.1 1 22 2.63 2 24 3.139 22 26 3.64 24 2 9.19 9 13 2.2 11 1.3 7 1 16 3 2 17 1.77 16 2 2.9 1 1 2.141 13 16 23 16 43 37 32 27 23 14 69 24.136 19 23 32.17 17 21 29.21 1 19 26 26 49 44 41 37 34 2 61 3.213 21 2 36.273 19 23 33.393 17 21 3 3 3 49 4 4 43 39 132 36.36 23 2 39.392 21 2 36.64 19 23 32 41 7 4 4 1 4 321 17.3 12 19 2.3 11 16 2. 9 14 23 33 23 13 3.7 21 2 36.111 1 23 33.16 16 21 3 14 44 36 3 26 2 7 42.17 2 3 43.224 22 27 39.322 2 2 3 27 4 41 3 34 27 19.293 2 34 49.37 2 31 44.39 23 2 4 36 1 46 44 4 116 63.34 3 37 2.492 27 33 47.7 2 3 43 41 4 1 49 47 32 3.42 17 2 36.4 14 22 33.77 12 19 3 36 26 17 11 6 47.1 26 32 4.13 23 29 41.194 2 26 37 1 4 3 31 27 21 11 2 6.197 31 37 3.22 2 34 4.363 2 31 43 27 1 4 41 37 34 26 119.29 34 42 9.32 31 3 3. 2 34 4 34 1 4 4 42 37 1274 1.466 3 47 66.97 34 42 6.9 31 3 4 42 6 6 2 1 4 374 4.4 1 27 42.2 16 24 3.74 14 2 34 36 2 1 62.9 29 37 2.126 2 33 47.11 21 3 43 13 44 36 29 24 1 796.12 3 43 61.233 32 39.33 29 3 24 1 44 39 3 3 22 117 12.393 42 2 74.4 3 47 67.72 3 43 6 3 4 2 4 46 41 1311 14.493 4 7.632 41 7.99 37 4 64 42 6 6 2 47 43 6.3 23 3 1.6 2 3 46.9 17 26 42 39 29 19 13 627 7.113 34 44 62.14 29 39 6.2 2 36 1 46 3 31 26 2 73 1.163 39 4 67.2 3 43 61.3 3 39 21 43 37 32 27 1 1111 1.3 47 2.44 43 2 74.63 39 47 67 3 7 2 49 46 43 37 129 1.47 1 62.612 46 6.1 42 1 72 4 6 6 4 1 4 44 42 7.2 2 3 7.66 22 33 2.9 19 2 47 39 29 1 12 66 1.92 34 47 66.11 29 42 6.17 2 3 4 11 44 36 2 22 16 793 14.11 4 7.231 41 7.333 3 4 64 23 1 44 3 34 29 19 176 19.333 2 64 91.426 47 2.613 43 3 74 34 7 2 4 44 41 34 133 23.47 71 1.624 2 64 9.9 47 2 4 61 6 4 1 4 44 49 1.6 3 4 66.77 26 3 6.111 22 33 4 41 31 21 1 96 13.12 39 3 7.131 33 4 6.1 29 43 61 12 46 37 29 24 17 734 16.1 4 9 3.19 41 3 7.2 3 4 6 2 42 36 31 2 1 1124 24.363 9 73 13.46 4 66 93.66 49 6 4 3 3 49 46 42 36 1376 3.44 66 1 114.697 6 73 13 1.2 4 66 93 42 62 6 3 46 4 12.9 32 4 72.76 2 41 6.11 24 36 9 41 31 21 14 67 16.16 43 9 3.13 37 3 7.19 32 4 6 13 47 3 3 24 1 7 2.16 3 66 93.212 46 6 4.34 4 4 76 21 1 43 37 32 27 16 62 1.134 4 62.171 41 6.246 36 1 72 17 49 41 34 2 22 11 129 34.477 7 6 121.611 63 7 11.79 7 7 99 4 61 6 4 47 42 47 1.66 36 4 1.4 31 47 73.121 27 4 66 42 32 22 16 637 2.117 4 66 93.149 42 6 4.21 36 4 76 14 4 39 31 26 2 796 2.12 6 74 14.233 2 67 94.336 4 6 22 2 4 39 34 2 1 111 3.37 71 7 123.47 64 79 111.6 71 11 3 9 3 49 4 42 3 1274 4.466 76 93 132.97 69 4 119.9 62 76 1 39 62 6 4 47 41 49 1.69 4 6. 34 1.126 3 44 72 43 33 23 17 61 24.122 3 72 12.16 46 6 92.22 39 9 3 1 49 4 32 27 2 14 3.19 66 1 114.244 7 73 13.31 49 66 93 23 3 46 39 3 29 19 16 4.339 76 93 132.434 69 4 119.624 62 76 1 34 9 3 49 4 41 33 133 4.4 3 12 144.62 7 92 13.9 6 3 11 4 62 7 4 1 4 42 NOTES: NC values are based on octave band 2 7 sound power levels minus a room absorption 1dB, re 1 12 Watts. ash in space denotes a NC value less than 1. ata was obtained from tests conducted in accordance with ANSI/ASHAE Standard 7. Throw values are given for terminal velocities of 1, 1, and FPM (.7,., and.2 m/s). Throw data assumes a free jet. For entrained jets, throw increases by approximately 3%. AI NOZZLES & OUN GILLES Providing You With Air istribution Solutions H137
H1 AI NOZZLES & OUN GILLES, ound Single, ouble eflection, Supply Performance ata AI NOZZLES & OUN GILLES METIC ATA:, Area Nom. Vel. Air Flow egrees 1egrees 3egrees Pt Throw Pt Throw Pt Throw NC Octave Band cm m 2 cm m/s L/s Pa m Pa m Pa m 2 3 4 6 7 2.32 1 2.1 2 3.73 2 36.999 3 41.13 36 46.164 41 1.23 46 6.24 1 61.292 6 66.342 61 1.31 43 4. 2.7 4. 6. 6.1 2.3 3..4. 2. 3. 4.9 3 2 2.63 19.1 4.9 6.. 24. 4.4.4 7.7 3.2 4. 4.9 7. 16 43 37 32 27 23 14 3. 113 34..7 6.9 9. 43..1 6.3.9 62.6 4.6.7. 26 49 44 41 37 34 2 4.3 142 3.1 6.3 7. 11. 6..7 7. 9.9 97..2 6.3 9. 3 3 49 4 4 43 39.24 17 76.2 6.9. 12. 97.6 6.3 7.7 1.9 14.4.7 6.9 9. 41 7 4 4 1 4 1.63 3 7.4 3..7.4 9.4 3.2 4.9 7.6 13.6 2. 4.2 6.9 33 23 13 2. 142 21.7 6.3 7.7 11. 27..6 7. 9.9 39.9 4. 6.3 9. 14 44 36 3 26 2 3.96 21 43. 7. 9.2 13..7 6..3 11..1 6.2 7. 1.7 27 4 41 3 34 27.13 26 72..6 1. 14. 93.3 7.7 9. 13.4 134.2 7..6 12.1 36 1 46 44 4.7 297 9.6 9.2 11.2 1.9 122..3 1.2 14.4 176.2 7. 9.2 13. 41 4 1 49 47 1.94 142 1..1 7.6 11. 13.4 4.4 6. 9.9 19.3 3..6 9. 36 26 17 11 3.7 224 26.2. 9.7 13. 33.6 6.9. 12. 4.3 6.. 11.3 1 4 3 31 27 21 11 4.21 37 49.1 9.3 11.4 16.1 62..4 1.3 14.6 9.4 7.6 9.3 13.2 27 1 4 41 37 34 26.1 37 74.3 1.3 12.6 17.9 9.2 9.3 11.4 16.2 136.9. 1.4 14.6 34 1 4 4 42 37 6.47 472 116.1 11. 14.1 2. 14.7 1.4 12. 1.1 214. 9. 11.6 16.4 42 6 6 2 1 4 1.9 19 1...3 12.6 12. 4. 7.2 11.4 1. 4.1 6.2 1.4 36 2 1 2.97 29 24..7 11.2 1. 31.4 7. 1.1 14.3 4.1 6.4 9.2 12.9 13 44 36 29 24 1 4.4 41 4.3 1.6 13. 1.4. 9.6 11. 16.7 3.4.7 1.7 1.1 24 1 44 39 3 3 22.94 9 97.9 12.9 1. 22.4 12. 11.7 14.3 2.2 1. 1.6 12.9 1.3 3 4 2 4 46 41 6.66 661 122.9 13.7 16.7 23.7 17.4 12.4 1.1 21.4 226.4 11.2 13.7 19.4 42 6 6 2 47 2.1 23 13.2 7.1 1.6 1. 16.9 6.1 9.1 14. 24.4.3 7.9 12.7 39 29 19 13 3.19 413 2.1 1.3 13.2 1.7 36..9 12. 16.9 1. 7.7 1. 1.3 1 46 3 31 26 2 3.2 496 4. 11. 14. 2. 1.9 1.7 13.1 1. 74.6 9.2 11.9 16. 21 43 37 32 27 1.64 732.3 14.4 17.6 24.9 113.1 13. 1.9 22. 162.7 11. 14.4 2.4 3 7 2 49 46 43 37 6. 119.1 1. 19. 26. 12. 14. 17.2 24.3 219.4 12.7 1. 22. 4 6 6 4 1 4 44 2.16 34 12.9 7.7 11. 17.3 16. 6.6 9.9 1.7 23..7.6 14.2 39 29 1 12 2. 472 22.9 1.2 14.1 2. 29.4. 12. 1.1 42.3 7.6 11.4 16.4 11 44 36 2 22 16 4.3 661 4. 13.7 16.7 23.7 7.6 12.4 1.1 21.4 2. 1.7 13.7 19.4 23 1 44 3 34 29 19.47 97 2. 1.9 19. 27.6 16.1 14.4 17.6 24.9 12.6 13. 16. 22.6 34 7 2 4 44 41 34 6.62 1 121.4 17. 21.4 3.3 1.4 1. 19.4 27.4 223.6 14.3 17.6 24. 4 61 6 4 1 4 44 2.33 472 1.1 9. 13.6 2. 19.3 7. 11.7 1.1 27.7 6.7 1.1 16.4 41 31 21 1 3.3 614 2.4 11. 16.1 22. 32.6 1.1 14.6 2.6 46.9.7 13.1 1.7 12 46 37 29 24 17 3.73 7 3. 14. 17.9 2.3 49.4 12. 16.2 22.9 71. 1. 14.6 2.7 2 42 36 31 2 1.71 116 9.3 1.1 22.1 31.3 11.7 16.4 2. 2.3 166. 14. 1.1 2.6 3 3 49 46 42 36 6.99 1416 13. 2. 24. 34.6 173. 1.1 22.2 31.3 249.6 16.4 2.1 2.4 42 62 6 3 46 2.31 66 14. 9.7 14.6 21.9 19..4 12.6 19. 27.3 7.2 1. 17.9 41 31 21 14 3. 7 26.3 13. 17.9 2.3 33.7 11.2 16.2 22.9 4. 9.6 14. 2.7 13 47 3 3 24 1 3. 944 41.1 16.2 2. 2.3 2.7 14. 1.1 2.6 7. 12.1 16.4 23.2 21 1 43 37 32 27 16 3.47 33.3 14.6 19. 26. 42.7 12.6 17.2 24.3 61.4 1. 1. 22. 17 49 41 34 2 22 11 6. 16 11. 21.3 26.1 36.9 12.2 19.3 23.6 33.4 219. 17.4 21.4 3.2 4 61 6 4 47 42 2.43 7 16.3 11. 16. 24. 2.9 9. 14.2 22.2 3.1.2 12.3 2.1 42 32 22 16 3.24 944 29. 14.7 2. 2.3 37.2 12.7 1.1 2.6 3. 1.9 16.4 23.2 14 4 39 31 26 2 4. 11 4.4 1.3 22.4 31.6.1 1. 2.2 2.6 3.6 13.6 1.3 2.9 22 2 4 39 34 2 1.66 162.9 21.6 26. 37.4 113.9 19. 23.9 33.9 163. 17.7 21.7 3.6 3 9 3 49 4 42 3 6.47 1 116.1 23.1 2.3 4. 14.7 2.9 2.6 36.2 214. 1.9 23.2 32. 39 62 6 4 47 41 2.4 17.1 12.1 1.1 26. 21.9 1.4 1.6 24.3 31. 9. 13. 22. 43 33 23 17 3.31 1133 3.4 16.1 21.9 31. 3.9 13.9 19. 2..9 12. 17.9 2.4 1 49 4 32 27 2 4.14 1416 47.4 2. 24. 34.6 6.7 17.4 22.2 31.3 7.4 1. 2.1 2.4 23 3 46 39 3 29 19.2 1 4.3 23.1 2.3 4. 1. 2.9 2.6 36.2 1.3 1.9 23.2 32. 34 9 3 49 4 41 33 6.62 226 121.4 2.3 31. 43. 1. 22.9 2. 39.7 223.7 2.7 2.4 3.9 4 62 7 4 1 4 42 NOTES: NC values are based on octave band 2 7 sound power levels minus a room absorption 1dB, re 1 12 Watts. ash in space denotes a NC value less than 1. ata was obtained from tests conducted in accordance with ANSI/ASHAE Standard 7. Throw values are given for terminal velocities of 1, 1, and FPM (.7,., and.2 m/s). Throw data assumes a free jet. For entrained jets, throw increases by approximately 3%. KUEGE 212 H13 www.kruegerhvac.com Excellence in Air istribution
AI NOZZLES & OUN GILLES H1,, Suggested Specification & Configuration Series ound Single eflection 1. SEIES: (XXXXXX) Aluminum, ound Single eflection, Concealed Mount Aluminum, ound Single eflection, ound Adaptor Aluminum, ound Single eflection, ound educer 2. SIZE: (XX) * 6 6 Unit Unit 1 1 Unit 12 12 Unit 14 14 Unit 16 16 Unit 1 1 Unit 2 2 Unit 22 22 Unit 24 24 Unit 3. FINISH: (XX) 1 Mill 36 Black 44 British White Bright White 61 Gray Prime 7 Silver Metallic 99 Custom Color * Unit and duct sizes are not the same for model. The single deflection round supply grille shall be a Krueger model. This grille must have individually adjustable of.227 and a minimum thickness of no less than.62. The flange of the shall be made of aluminum and have a minimum thickness of.72. A foam gasket on the reverse side of the flange shall be provided by the manufacturer. The single deflection round supply grille shall have a concealed mounting system that includes a separate duct mounting ring. Screw holes on the face of the unit are not acceptable. The single deflection round supply grille shall be a Krueger model. This grille must have individually adjustable of.227 and a minimum thickness of no less than.62. The flange of the shall be made of aluminum and have a minimum thickness of.72. The single deflection round supply grille shall slide cleanly over the end of exposed duct work and be secured with screws provided by the manufacturer. The screws shall mount to the side of the grille. Screw holes on the face of the unit are not acceptable. The single deflection round supply grille shall be a Krueger model. This grille must have individually adjustable of.227 and a minimum thickness of no less than.62. The flange of the shall be made of aluminum and have a minimum thickness of.72. The single deflection round supply grille shall slide cleanly into end of exposed duct work and be secured with screws provided by the manufacturer. The screws shall mount to the side of the grille. Screw holes on the face of the unit are not acceptable. AI NOZZLES & OUN GILLES PEFOMANCE The manufacturer shall provide published performance data for the grille. The grille shall be tested in accordance to the data standards at the time of product introduction or ANSI/ ASHAE Standard 7. KUEGE 212 SAMPLE CONFIGUATION: 1 44 FINISH The paint finish shall be #7 Silver Metallic and be a PSeries Powder Coating finish, baked at 4 F for 7 minutes. The paint thickness shall be 1. 2.2 mils, pencil hardness per ASTM 3363 of H 2H, crosshatch adhesion per ASTM 339 of 4B, impact per ASTM 2794 of direct and reverse impact range of 4 to 16 in/lb depending on formulation, salt spray per ASTM B117 of 1 hours, humidity per ASTM 2247 of 1 hours and water soak per ASTM 72 of hours. Providing You With Air istribution Solutions H139
H1 AI NOZZLES & OUN GILLES Series ound ouble eflection,, Suggested Specification & Configuration AI NOZZLES & OUN GILLES The double deflection round supply grille shall be a Krueger model. This grille must have individually adjustable of.227 and a minimum thickness of no less than.62. The flange of the shall be made of aluminum and have a minimum thickness of.72. A foam gasket on the reverse side of the flange shall be provided by the manufacturer. The double deflection round supply grille shall have a concealed mounting system that includes a separate duct mounting ring. Screw holes on the face of the unit are not acceptable. The double deflection round supply grille shall be a Krueger model. This grille must have individually adjustable of.227 and a minimum thickness of no less than.62. The flange of the shall be made of aluminum and have a minimum thickness of.72. The double deflection round supply grille shall slide cleanly over the end of exposed duct work and be secured with screws provided by the manufacturer. The screws shall mount to the side of the grille. Screw holes on the face of the unit are not acceptable. The double deflection round supply grille shall be a Krueger model. This grille must have individually adjustable of.227 and a minimum thickness of no less than.62. The flange of the shall be made of aluminum and have a minimum thickness of.72. The double deflection round supply grille shall slide cleanly into end of exposed duct work and be secured with screws provided by the manufacturer. The screws shall mount to the side of the grille. Screw holes on the face of the unit are not acceptable. 1. SEIES: (XXXXXXX) Aluminum, ound ouble eflection, Concealed Mount Aluminum, ound ouble eflection, ound Adaptor Aluminum, ound ouble eflection, ound educer 2. SIZE: (XX) * 6 6 Unit Unit 1 1 Unit 12 12 Unit 14 14 Unit 16 16 Unit 1 1 Unit 2 2 Unit 22 22 Unit 24 24 Unit 3. FINISH: (XX) 1 Mill 36 Black 44 British White Bright White 61 Gray Prime 7 Silver Metallic 99 Custom Color * Unit and duct sizes are not the same for model. PEFOMANCE The manufacturer shall provide published performance data for the grille. The grille shall be tested in accordance to the data standards at the time of product introduction or ANSI/ ASHAE Standard 7. FINISH The paint finish shall be #7 Silver Metallic and be a PSeries Powder Coating finish, baked at 4 F for 7 minutes. The paint thickness shall be 1. 2.2 mils, pencil hardness per ASTM 3363 of H 2H, crosshatch adhesion per ASTM 339 of 4B, impact per ASTM 2794 of direct and reverse impact range of 4 to 16 in/lb depending on formulation, salt spray per ASTM B117 of 1 hours, humidity per ASTM 2247 of 1 hours and water soak per ASTM 72 of hours. SAMPLE CONFIGUATION: 1 44 H14 www.kruegerhvac.com Excellence in Air istribution KUEGE 212