PowerGen TM Product Catalog

PowerGen TM Product Catalog Milbank 4801 Deramus Ave., Kansas City, MO 64120 877.483.5314 milbankworks.com

2 ABOUT MILBANK About Milbank Energy at Work Milbank provides the tools that empower life. We enable the amazing in countless everyday ways through our thoughtfully designed products and collaborative ingenuity. More than a manufacturing company, we are an active and engaged contributor in the movement and utility of energy. We are energy at work. As a third-generation family-owned business, Milbank has been engineering and manufacturing electrical supplies, equipment and solutions for use by utilities, contractors, distributors and OEMs since its founding in 1927. Today, Milbank s meter mounting equipment is the standard by which all others are measured. Our meter sockets and electrical enclosures can be found on homes, schools, businesses, factories, roadways, RV parks, arenas, and airports across North America. Much like the baseball bat that transfers the player s energy to the ball, Milbank provides the technology that moves power.

Table of Contents PowerGen TM Product Catalog 3 Table of Contents Standby Generator Systems 8 & 10kW 4-5 12kW 6-7 17 & 20kW 8-9 30 & 35kW 10-11 45 & 48kW 12-13 60 & 62kW 14-15 Transfer Switches 16-19 Portable Generators 5500-7500W 20-21 Contractor & Distributor Benefits 22-23 Electric Vehicle Supply Equipment (EVSE) Wall-Mounted Charging Dock 24 Pedestal Charging Station 25 Technical Specifications 8-20kW 26-27 30-60kW 28-29 Transfer Switches 30-33 5500-7500W 34-35 EVSE 36 Milbank PowerGen TM Team 37

4 8 & 10kW 8 & 10kW Home Standby Generators Models 8kW 1 MG08001 Keep essential appliances powered with the 8kW 1 generator connected to pre-selected circuits. 10kW 1 MG10002 Power the essentials and more with the 10kW 1 paired with Milbank s automatic transfer switch. Utilizing our Power Management Technology, the automatic transfer switch allows for flexible management of electricity and appliances - all while using a smaller, more fuel-efficient generator. Features More Power in a Smaller Generator The compact 8 1 and 10kW 1 standby generator is one of the most powerful units of its kw class with higher power output per square inch of its footprint providing backup electricity to more of your household appliances. Homeowner Safety & Protection We take protection to a whole new level - the 8kW 1 and 10kW 1 come with an external, automatic gas shut-off valve, low pressure regulator and a thermally-protected fuel system which automatically shuts down the unit during an emergency (not found on any other competing generator in its class). Comprehensive Warranty Both the 8kW 1 and 10kW 1 units include a three-year, comprehensive parts and labor warranty 2. At Milbank, we stand behind our products (for more than 85 years!), making it easy for our customers to work with us. Flexible Placement 3 Tested against the tough National Fire Protection Agency 37 standard, Milbank 8 1 & 10kW 1 standby generators can be placed as close as 18 from the home providing more placement options in your yard* perfect for tight lot lines. Durable Enclosure & Base Our enclosures are made from the same rust-resistant, durable Galvanneal steel that is found in the automotive industry and features an automotive-grade paint process which results in protection against chipping and abrasions. Our enclosures and base can endure temperatures of more than double that of aluminum and plastic. Innovative Airflow Technology With the engine and alternator intakes located in the rear, front ventilation pushes the heat and carbon monoxide away from the house - protecting homes, shrubs and landscaping from damage. Easy Wireless Monitoring - Simple, trouble-free monitoring is a reality with our optional Basic Wireless Monitor (sold separately). 3 YEAR WARRANTY 1 This generator is rated in accordance with UL (Underwriters Laboratories) 2200 (stationary engine generator assemblies) and CSA (Canadian Standards Association) standard C22.2 No. 100-04 (motors and generators). 2 Warranty details are available at milbankworks.com. 3 Installations must strictly comply with all applicable codes, industry standards, laws, regulations and provided installation manual. Running engines give off carbon monoxide, an odorless, colorless, poisonous gas so it is important to keep exhaust gas away from any windows, doors, ventilation intakes or crawl spaces. The installation manual contains specific instructions related to generator placement in addition to NFPA 37, including the requirement that carbon monoxide detectors be installed and maintained in your home. Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the product described at any time without notice or obligation. Other Generator/Automatic Transfer switch manufacturers products are not compatible with Milbank Home Generator Systems.

8 & 10kW Home Standby Accessories 5 8 & 10kW Maintenance kit Complete with special UL air filter, pre-cleaner, spark plugs, oil filter and synthetic oil. 8kW MG080022 10kW MG101222 wireless router MG623501 A signal enhancement to overcome obstructions. Recommended for applications with distances of 100 feet or more. wireless monitor MG626401 Easy, trouble-free monitoring is a reality with the new Milbank Basic Wireless Monitor. Place the wireless monitor in your home and know your generator is working without ever having to go outside. Cold weather kit 8kW MG626201 - Dual Oil Heater Complete with a dual oil heater and battery warmer - both thermostatically controlled to heat up when the temperature drops, ensuring smooth starting and engine operation. Tested at -25ºF. 10kW MG111102 Complete with an oil heater and battery warmer - both thermostatically controlled to heat up when the temperature drops, ensuring smooth starting and engine operation. Tested at -25ºF.

612kW 12kW Home Standby Generators Models 12kW 1 MG12002 Bigger isn t always better - especially when it comes to whole-house power. Ideal for small- to medium-sized homes, the 12kW 1 generator can intuitively power the whole house when paired with a Milbank automatic transfer switch. Features Streamlined, Space-Saving Design Its vertical, sleek design allows for a smaller footprint than most other generators in its class. The compact 12kW ¹ profile blends in beautifully with your home s exterior and landscaping, much like your central air conditioner. Comprehensive Warranty 2 The 12kW ¹ unit includes a four-year limited warranty 2 - one of the best comprehensive parts and labor warranties in the industry. At Milbank, we stand behind our products (for more than 85 years!), making it easy for our customers to work with us. Flexible Placement 3 Tested against tough National Fire Protection Agency standards, Milbank 12kW ¹ standby generator can be placed as close as 18 from the home, providing more placement options in your yard - perfect for tight lot lines. Homeowner Safety & Protection We take protection to a whole new level - the 12kW 1 comes with an external, automatic gas shut-off valve, low pressure regulator and a thermally-protected fuel system which automatically shuts down the unit during an emergency (not found on any other competing generator in its class). Power Management Technology Partner with an automatic transfer switch to manage up to two load-dependent air conditioner units providing true whole-house power with a smaller, more affordable generator. Durable Enclosure & Base Our enclosures are made from the same rust-resistant, durable Galvanneal steel that is found in the automotive industry and features an automotive-grade paint process which results in protection against chipping and abrasions. Our enclosures and base can endure temperatures of more than double that of aluminum and plastic. 4 YEAR WARRANTY 1 This generator is rated in accordance with UL (Underwriters Laboratories) 2200 (stationary engine generator assemblies) and CSA (Canadian Standards Association) standard C22.2 No. 100-04 (motors and generators). 2 Warranty details are available at milbankworks.com. 3 Installations must strictly comply with all applicable codes, industry standards, laws, regulations and provided installation manual. Running engines give off carbon monoxide, an odorless, colorless, poisonous gas so it is important to keep exhaust gas away from any windows, doors, ventilation intakes or crawl spaces. The installation manual contains specific instructions related to generator placement in addition to NFPA 37, including the requirement that carbon monoxide detectors be installed and maintained in your home. Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the product described at any time without notice or obligation. Other Generator/Automatic Transfer switch manufacturers products are not compatible with Milbank Home Generator Systems.

12kW Home Standby Accessories 7 12kW Maintenance kit MG121822 Complete with special UL air filter, pre-cleaner, spark plugs, oil filter and synthetic oil. Cold weather kit MG111102 Complete with an oil heater and battery warmer - both thermostatically controlled to heat up when the temperature drops, ensuring smooth starting and engine operation. Tested at -25ºF.

8 17 & 20kW 17 & 20kW Home Standby Generators Models 17kW 1 MG17001 20kW 1 MG20003 Innovative and intelligent, the 17 1 & 20kW 1 deliver the high performance homeowners expect. The unique airflow technology coupled with sounddampening compressed fiberglass make these some of the quietest generators in the industry, a diplomatic choice to keep neighbors happy. Features Built for High-Performance These units are built with the extremely reliable Briggs & Stratton Commercial Grade Vanguard Engine. Proven in applications around the world, Vanguard s OHV technology provides superior balance, low vibration and emissions, and better fuel economy. Our electronic governors also provide stable, consistent power for sensitive electronics and today s most advanced appliances. Comprehensive Warranty 2 Both the 17kW 1 and 20kW 1 units include a four-year limited warranty 2 - one of the best comprehensive parts and labor warranties in the industry. At Milbank, we stand behind our products (for more than 85 years!), making it easy for our customers to work with us. Durable Enclosure & Base Our enclosures are made from the same rust-resistant, durable Galvanneal steel that is found in the automotive industry and features an automotive-grade paint process which results in protection against chipping and abrasions. Our enclosures and base can endure temperatures of more than double that of aluminum and plastic. Ideal for medium- to large-sized homes Homeowner Safety & Protection We take protection to a whole new level - the 17kW 1 and 20kW 1 come with an external, automatic gas shutoff valve, low pressure regulator and a thermallyprotected fuel system which automatically shuts down the unit during an emergency (not found on any other competing generator in its class). These units also feature a corrugated metal fuel hose for safer operation. Flexible Placement 3 Tested against the tough National Fire Protection Agency 37 standard, Milbank 17 1 & 20kW 1 standby generators can be placed as close as 18 from the home providing more placement options in your yard* perfect for tight lot lines. Innovative Airflow Technology This feature provides better efficiency and longer life, and makes the 17 1 & 20kW 1 our quietest generators. With the engine and alternator intakes located in the rear, front ventilation pushes the heat and carbon monoxide away from the house - protecting homes, shrubs and landscaping from damage. 4 YEAR WARRANTY 1 This generator is rated in accordance with UL (Underwriters Laboratories) 2200 (stationary engine generator assemblies) and CSA (Canadian Standards Association) standard C22.2 No. 100-04 (motors and generators). 2 Warranty details are available at milbankworks.com. 3 Installations must strictly comply with all applicable codes, industry standards, laws, regulations and provided installation manual. Running engines give off carbon monoxide, an odorless, colorless, poisonous gas so it is important to keep exhaust gas away from any windows, doors, ventilation intakes or crawl spaces. The installation manual contains specific instructions related to generator placement in addition to NFPA 37, including the requirement that carbon monoxide detectors be installed and maintained in your home. Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the product described at any time without notice or obligation. Other Generator/Automatic Transfer switch manufacturers products are not compatible with Milbank Home Generator Systems.

17 & 20kW Home Standby Accessories 9 17 & 20kW maintenance kit MG151822 Complete with special UL air filter, pre-cleaner, spark plugs, oil filter and synthetic oil. Wireless monitor MG622901 Easy, trouble-free monitoring is a reality with the new Milbank Basic Wireless Monitor. Place the wireless monitor in your home and know your generator is working without ever having to go outside. cold weather kit MG623101 Complete with a dual oil heater and battery warmer - both thermostatically controlled to heat up when the temperature drops, ensuring smooth starting and engine operation. Tested at -25ºF. wireless router MG623501 A signal enhancement to overcome obstructions. Recommended for applications with distances of 100 feet or more transfer switch MG4002001 The dual 400 amp / split 200 amp automatic transfer switch replaces the need for two 200 Amp transfer switches in a standard split 400A service home with two 200 Amp distribution panels. See page 17 for more details. Only available with MG20003, MG35001, MG45001 and MG60001.

10 30 & 35kW 30 & 35 kw Commercial Standby Generators models 30kW 1 MG30208 [3ø] 30kW 1 Three-Phase 208V 35kW 1 MG35001 Ideal for large homes and businesses with increasing electrical demands. features Durable Outdoor Enclosure Galvaneal steel provides years of rust-resistant, outdoor protection - perfect for extreme weather conditions. Premier Commercial Warranty Compared to other one- and two-year commercial warranties, Milbank offers a four-year limited warranty 2 that includes parts and labor. It s one of the most comprehensive warranties in the commercial standby power industry. Industrial-Grade GM Vortec TM Engine This world class four-cylinder GM Vortec TM engine operates at 1800 RPM - quieter and more fuelefficient than 3600 RPM engines. Longer Product Life A commercial generator is a big investment. Designed with a longer life span, Milbank s commercial units have lower engine/ alternator speeds and limited temperature rise. Power Management Technology Used with our single-phase, liquid-cooled generators, Milbank s automatic transfer switch comes standard with our patented power management technology managing up to (2) load-dependent air conditioner units while keeping critical home or business applications powered. (For more information on our Power Management Technology, see page 16). Three-Phase Automatic Transfer Switches Used with our three-phase generators, Milbank offers DynaGen and GE Zenith automatic transfer switches that switch at high speeds for today s most critical loads. For more details on our threephase transfer switches please see our specs pages 30-31. 4 YEAR WARRANTY 1 This generator is rated in accordance with UL (Underwriters Laboratories) 2200 (stationary engine generator assemblies) and CSA (Canadian Standards Association) standard C22.2 No. 100-04 (motors and generators). 2 Warranty details are available at milbankworks.com. Installations must strictly comply with all applicable codes, industry standards, laws, regulations and provided installation manual. Running engines give off carbon monoxide, an odorless, colorless, poisonous gas so it is important to keep exhaust gas away from any windows, doors, ventilation intakes or crawl spaces. The installation manual contains specific instructions related to generator placement in addition to NFPA 37, including the requirement that carbon monoxide detectors be installed and maintained in your home. Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the product described at any time without notice or obligation. Other Generator/Automatic Transfer switch manufacturers products are not compatible with Milbank Home Generator Systems.

30 & 35kW Commercial Standby Accessories 11 30 & 35kW maintenance kit 30kW [3ø] MG300022 35kW MG300022 Complete with special UL air filter, pre-cleaner, spark plugs, oil filter and synthetic oil. Engine block heater 30kW MG624101 35kW MG624101 Designed for maximum engine performance, engine block heaters keep engines warm, allowing for faster and easier startups in cold weather. Milbank 35KW, 45kW and 60kW standby generators are tested to start at -20ºF using this kit. Each kit includes an engine block heater and bracket. transfer switch MG4002001 The dual 400 amp / split 200 amp automatic transfer switch replaces the need for two 200 Amp transfer switches in a standard split 400A service home with two 200 Amp distribution panels. See page 17 for more details. Only available with MG20003, MG35001, MG45001 and MG60001.

12 45 & 48kW 45 & 48kW Commercial Standby Generators models 45kW 1 MG450001 48kW 1 MG450208 [3ø] 48kW 1 Three-Phase 208V Ideal for large homes and businesses with increasing electrical demands. features Durable Outdoor Enclosure Galvaneal steel provides years of rust-resistant, outdoor protection - perfect for extreme weather conditions. Premier Commercial Warranty Compared to other one- and two-year commercial warranties, Milbank offers a four-year limited warranty 2 that includes parts and labor. It s one of the most comprehensive warranties in the commercial standby power industry. Industrial-Grade GM Vortec TM Engine This world class eight-cylinder GM Vortec TM engine operates at 1800 RPM - quieter and more fuelefficient than 3600 RPM engines. Longer Product Life A commercial generator is a big investment. Designed with a longer life span, Milbank s commercial units have lower engine/ alternator speeds and limited temperature rise. Power Management Technology Used with our single-phase, liquid-cooled generators, Milbank s automatic transfer switch comes standard with our patented power management technology managing up to (2) load-dependent air conditioner units while keeping critical home or business applications powered. (For more information on our Power Management Technology, see page 16). Three-Phase Automatic Transfer Switches Used with our three-phase generators, Milbank offers DynaGen and GE Zenith automatic transfer switches that switch at high speeds for today s most critical loads. For more details on our three-phase transfer switches please see the specifications on pages 30-31. 4 YEAR WARRANTY 1 This generator is rated in accordance with UL (Underwriters Laboratories) 2200 (stationary engine generator assemblies) and CSA (Canadian Standards Association) standard C22.2 No. 100-04 (motors and generators). 2 Warranty details are available at milbankworks.com. Installations must strictly comply with all applicable codes, industry standards, laws, regulations and provided installation manual. Running engines give off carbon monoxide, an odorless, colorless, poisonous gas so it is important to keep exhaust gas away from any windows, doors, ventilation intakes or crawl spaces. The installation manual contains specific instructions related to generator placement in addition to NFPA 37, including the requirement that carbon monoxide detectors be installed and maintained in your home. Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the product described at any time without notice or obligation. Other Generator/Automatic Transfer switch manufacturers products are not compatible with Milbank Home Generator Systems.

45 & 48kW Commercial Standby Accessories 13 45 & 48kW maintenance kit 45kW MG450022 48kW [3ø] MG450022 Complete with special UL air filter, pre-cleaner, spark plugs, oil filter and synthetic oil. Engine block heater 45kW MG624201 48kW [3ø] MG624201 Designed for maximum engine performance, engine block heaters keep engines warm, allowing for faster and easier startups in cold weather. Milbank 35KW, 45kW and 60kW standby generators are tested to start at -20ºF using this kit. Each kit includes an engine block heater and bracket. transfer switch MG4002001 The dual 400 amp / split 200 amp automatic transfer switch replaces the need for two 200 Amp transfer switches in a standard split 400A service home with two 200 Amp distribution panels. See page 17 for more details. Only available with MG20003, MG35001, MG45001 and MG60001.

14 60 & 62kW 60 & 62kW Commercial Standby Generators models 60kW 1 MG60001 62kW 1 MG60208 [3ø] 62kW 1 Three-Phase 208V Ideal for large homes and businesses with increasing electrical demands. features Durable Outdoor Enclosure Galvaneal steel provides years of rust-resistant, outdoor protection - perfect for extreme weather conditions. Premier Commercial Warranty Compared to other one- and two-year commercial warranties, Milbank offers a four-year limited warranty 2 that includes parts and labor. It s one of the most comprehensive warranties in the commercial standby power industry. Industrial-Grade GM Vortec TM Engine This world class eight-cylinder GM Vortec TM engine operates at 1800 RPM - quieter and more fuelefficient than 3600 RPM engines. Longer Product Life A commercial generator is a big investment. Designed with a longer life span, Milbank s commercial units have lower engine/ alternator speeds and limited temperature rise. Power Management Technology Used with our single-phase, liquid-cooled generators, Milbank s automatic transfer switch comes standard with our patented power management technology managing up to (2) load-dependent air conditioner units while keeping critical home or business applications powered. (For more information on our Power Management Technology, see page 16). Three-Phase Automatic Transfer Switches Used with our three-phase generators, Milbank offers DynaGen and GE Zenith automatic transfer switches that switch at high speeds for today s most critical loads. 4 YEAR WARRANTY 1 This generator is rated in accordance with UL (Underwriters Laboratories) 2200 (stationary engine generator assemblies) and CSA (Canadian Standards Association) standard C22.2 No. 100-04 (motors and generators). 2 Warranty details are available at milbankworks.com. Installations must strictly comply with all applicable codes, industry standards, laws, regulations and provided installation manual. Running engines give off carbon monoxide, an odorless, colorless, poisonous gas so it is important to keep exhaust gas away from any windows, doors, ventilation intakes or crawl spaces. The installation manual contains specific instructions related to generator placement in addition to NFPA 37, including the requirement that carbon monoxide detectors be installed and maintained in your home. Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the product described at any time without notice or obligation. Other Generator/Automatic Transfer switch manufacturers products are not compatible with Milbank Home Generator Systems.

60 & 62kW Commercial Standby Accessories 15 60 & 62kW maintenance kit 60kW MG450022 62kW [3ø] MG450022 Complete with special UL air filter, pre-cleaner, spark plugs, oil filter and synthetic oil. Engine block heater 60kW MG624201 62kW [3ø] MG624201 Designed for maximum engine performance, engine block heaters keep engines warm, allowing for faster and easier startups in cold weather. Milbank 35KW, 45kW and 60kW standby generators are tested to start at -20ºF using this kit. Each kit includes an engine block heater and bracket. transfer switch MG4002001 The dual 400 amp / split 200 amp automatic transfer switch replaces the need for two 200 Amp transfer switches in a standard split 400A service home with two 200 Amp distribution panels. See page 17 for more details. Only available with MG20003, MG35001, MG45001 and MG60001.

16 Transfer switches Transfer Switches Power Management Technology Milbank s automatic transfer switch and Power Management Technology can intelligently manage electrical loads. This technology is driving the industry in meeting NEC 702 standards, allowing homeowners access to whole-house managed power - all with a smaller, more efficient generator system, saving time and money on installation. features Patented Power Management Technology During a power outage, most people think they have to go without central air conditioning to weather the storm. Keep your cool with patented MG2003992 computer controlled transfer switches featuring our Power Management Technology that manages up to two central air conditioners while safeguarding against power overload. The size of your generator dictates the level of comfort provided by this feature. 12kW One 4 Ton AC 17kW Two 4 Ton ACs 20kW Two 5 Ton ACs MANAGEMENT TECHNOLOGY 3 YEAR WARRANTY How it works Our power management system intelligently monitors the load the generator is providing when utility power is lost and waits until enough power is available to start higher wattage loads. When higher wattage appliances (most common is central air conditioning systems) want to start up, they send a signal to the automatic transfer switch. By using a set of current transformers, we can monitor the load the generator is producing to the home. If the generator exceeds a predetermined capacity, the transfer switch will prevent these higher wattage loads from starting and check back every five minutes until enough power is available. Upgrade your system with Milbank s load control center (MG0501440) to further expand the generator s range and performance. In addition to the automatic transfer switch, the load control center will automatically prioritize and manage four additional high-demand 240V loads. MG0501440 Installers are required to review local codes prior to installation to determine if a transfer switch with separate disconnect is required. All installations must strictly comply with all applicable codes, industry standards, laws and regulations, and installation manual. Improper installation will void all warranties. Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the product described at any time without notice or obligation. Other Generator/Automatic Transfer switch manufacturers products are not compatible with Milbank Home Generator Systems.

Transfer Switches Dual 200 Amp / Split 400 Amp 17 Transfer switches model MG4002001 The Milbank Dual 200 Amp / Split 400 Amp Transfer Switch replaces the need for two 200 Amp transfer switches in standard split 400A service homes with two 200A distribution panels. It s a convenient and affordable solution to manage whole-house backup power for larger homes and businesses. features First In Its Class Never seen before automatic transfer switch technology only compatible with Milbank generators. Easy Installation The system uses one less transfer switch requiring less wiring, less time and expenses than typical installations. Plus factory pre-wired generator power distribution inside the transfer switch simplifies installation. Smaller Footprint Combining two automatic transfer switches into one, the Dual 200 Amp Transfer Switch / Split 400 Amp results in a smaller, cleaner looking installation for your customer. MG4002001 only sold with MG20003, MG35001, MG45001 and MG60001 3 YEAR WARRANTY See specifications on page 29. *Review local codes to determine if a transfer switch with separate service entrance disconnect is required. Installers are required to review local codes prior to installation to determine if a transfer switch with separate disconnect is required. All installations must strictly comply with all applicable codes, industry standards, laws and regulations, and installation manual. Improper installation will void all warranties. Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the product described at any time without notice or obligation. Other Generator/Automatic Transfer switch manufacturers products are not compatible with Milbank Home Generator Systems.

18 Transfer switches Transfer Switches DynaGen Milbank offers DynaGen and GE transfer switches for three-phase standby generator systems and single phase generator systems where applicable. DynaGen s Vigilant Series automatic transfer switch is designed to automatically transfer critical loads in the event of a power outage. It consists of a simple, rugged design while maintaining the flexibility required to meet the needs of residential, commercial and light industrial applications. DynaGen switches include a 5-year limited warranty. features Corrosion Protection The enclosure on the DynaGen automatic transfer switches is made from duplex coated, galvanized G90 grade steel and meets American society for Testing and Materials (ASTM) standard A653. The service life of the galvanized steel enclosures is more than twice that of regular steel. Externally Accessible Controls The user-friendly interface gives you full control of the exerciser clock, allowing users to set a specific time or day in which to perform a test for a load or no load condition. Note: MG070033 must be ordered with a DynaGen switch for compatibility. 5 YEAR WARRANTY Installers are required to review local codes prior to installation to determine if a transfer switch with separate disconnect is required. All installations must strictly comply with all applicable codes, industry standards, laws and regulations, and installation manual. Improper installation will void all warranties. Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the product described at any time without notice or obligation. Other Generator/Automatic Transfer switch manufacturers products are not compatible with Milbank Home Generator Systems.

Transfer Switches GE Zenith 19 Transfer switches Built for residential and light commercial applications, GE Zenith transfer switches provide a continuous source of power for critical loads by automatically transferring power from the utility to the back up generator. Designed for emergency standby applications, they incorporate a double-throw, mechanically interlocked contactor mechanism. features ZTX & ZTG Series Ideal for residential, commercial and light industrial applications. Sizes 200, 400 & 600 Amp Nema 3R, 120/208V. GE Zenith Microprocessor Equipped with the MX150 microprocessor panel which controls the operation and display status of the transfer switch s position, timers, and available sources. *Review local codes to determine if a transfer switch with separate service entrance disconnect is required. Installers are required to review local codes prior to installation to determine if a transfer switch with separate disconnect is required. All installations must strictly comply with all applicable codes, industry standards, laws and regulations, and installation manual. Improper installation will void all warranties. Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the product described at any time without notice or obligation. Other Generator/Automatic Transfer switch manufacturers products are not compatible with Milbank Home Generator Systems.

20 5500-7500W 5500-7500W Portable Generators From campsite to job site, from tent to trailer, and all points in between, Milbank s rugged, dependable portable generators put the power in your hands to get the job done. From 5500W to 7500W, trust in Milbank s comprehensive line of EPA compliant portable generator solutions to deliver power when you want it, wherever you need it. 3 YEAR WARRANTY EPA COMPLIANT features The Complete Package Includes everything you need in one box to hit the ground running wheel kit, handle kit (some assembly required), oil, funnel, and tool kit Quiet Operation The Pulse Flo muffler allows us to boast one of the quietest generators on the market Exclusive VR System Voltage regulated power protection for all your electronic needs Iron Sleeved Engine Our engine sleeves are made with cast iron for long lasting durability and low maintenance Simplified Operator Control Center Clean, simple and easy to use to harness the power you need, when you need it. 3-Year Limited Parts & Labor Warranty - One of the best comprehensive parts and labor warranties in the industry. Running engines give off carbon monoxide, an odorless, colorless, poisonous gas so it is important to keep exhaust gas away from any windows, doors, ventilation intakes or crawl spaces. Not for indoor use. Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the product described at any time without notice or obligation.

5500-7500W Portable Generators 21 5500-7500W MANUAL START 5500W MPG55003 6000W MPG6000S STORM UNIT + Comes with a 25 twist lock, 10 gauge, 30 amp power cord for added convenience ELECTRIC START 6500W MPG6500E 7000W MPG70002E 7500W MPG75002E Running engines give off carbon monoxide, an odorless, colorless, poisonous gas so it is important to keep exhaust gas away from any windows, doors, ventilation intakes or crawl spaces. Not for indoor use. Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the product described at any time without notice or obligation.

22 contractor benefits Contractor Benefits Authorized Generator Technician Certification BECOME A MILBANK AUTHORIZIED GENERATOR TECHNICIAN AUTHORIZED GENERATOR TECHNICIAN Become an Authorized Generator Technician with Milbank s certification class. This 8-hour technical course provides electrical contractors with the knowledge needed to install and perform warranty repairs on Milbank home standby generator units. This hands-on certification training allows contractors to experience a simulated power outage and generator startup process, view live sequence and industry-leading power management technology, and understand Milbank s live load management and load shedding capabilities. Milbank s generator certification class is required for any licensed electrical contractor who would like to be authorized to perform field repairs under Milbank s warranty policies and procedures. This certification is not required for installing Milbank home generator systems or performing routine maintenance. Contact Chad Palmer, Technical Services Specialist, or your local electrical distributor for more information.

Distributor Benefits Milbank OneSERT 23 distributor benefits The next natural disaster affecting your area is not a matter of IF, it s a matter of WHEN. And when that time comes, you need immediate world-class service. That s why Milbank offers OneSERT, your One-Stop Emergency Response Team to get you the product you need, when you need it. During normal business hours 8 a.m. - 5 p.m. CST - call our office at 816-410-7346. A single call to 800-227-5564 sets the OneSERT team in motion: After-hours call support 24 hours per day, 365 days per year Single point of contact to coordinate all aspects of the order Expedited product availability Optional solutions on product applications Fast, reliable service When a natural disaster strikes your area, put the country s leading manufacturer of meter sockets and related products on your team. Call Milbank s OneSERT emergency line at 800-227- 5564 or milbankworks.com/onesert. Note: this program as well as emergency portable generator stock (pictured below) is available only to our current electrical distributors. During Hurricane Sandy & Hurricane Irene, Milbank was able to react quickly and shipped thousands of portable generators to our electrical distributors across the country! Milton Milbankian 800-227 - 5564

24 Wall-mounted charging dock Wall-Mounted Charging Docks Electric Vehicle Supply Equipment (EVSE) Milbank s level II electric vehicle car charger delivers a full charge to an electric vehicle (EV) or plug-in electric vehicle (PHEV) in just a few hours. With AC power, electricity is transferred from the charging station to the car s on-board charger. This space-saving, wall-mounted design is ideal for a home garage - owners can conveniently charge vehicles while sleeping, enjoying a meal or spending time with friends and family. models Wall-Mount MEVSE-RS features Industry standard SAE J1772 connector Auto restart in event of power outage or ground fault Americans with Disabilities Act (ADA) compliant installation Integrated cable stowage Underwriters Laboratory (UL) listed Breakaway safety cable Optional pedestal mount Weather-resistant NEMA 4 enclosure 3-year warranty (parts) 3 YEAR WARRANTY

Pedestal Charging Stations Electric Vehicle Supply Equipment (EVSE) 25 pedestal charging station Milbank s industrial-grade enclosure is ideal for EV fleet operations. With secure, lockable cabinets, you can control the use of your charging stations. models Pedestal CPEV0111JSW1 features MEVSE-RS features plus: Secure, lockable cabinet to prevent theft and vandalism In-use front door allowing user to close and lock the access door while charging the EV or PHEV Lockable back service panel to allow only the contractor access for installation and service Dual feed lugs for loop feeding multiple units 40A 2P breaker disconnect included inside the back panel for power shutdown Pre-wired at the factory for easy installation Optional pad mount base installed in concrete for pedestal attachment, eliminating the need for drilling/installing anchor bolts Dual pedestal Custom design pedestal 3 YEAR WARRANTY

26 8-20kW Model Number Technical Specifications 8-20kW MG08001 8kW MG10002 10kW Watts LP/NG 8,000W (LP) / 7,200W (NG) 10,000W (LP) / 9,000W (NG) Main Breaker (Amps) 35 50 Amps LP/NG 33.3 / 29.9 41.7 / 37.5 Voltage 120/240V AC, Single Phase, 1.0 pf 120/240V AC, Single Phase, 1.0 pf Alternator Brushed Brushed Harmonic Distortion Less than 5% Less than 5% Voltage Regulation Automatic Automatic Fuel Type Propane (LP), Natural Gas Propane (LP), Natural Gas Sound Rating (at 7 Meters) 76.8 db 72.3 db Full Pressure Lubrication Yes Yes Overcrank Protection Yes Yes Dimensions (in inches: L x W x H) 28 x 24.4 x 35.1 28 x 24.4 x 35.1 Weight (Generator Only) 252 272 Orientation Vertical Vertical Limited Warranty* 3 year P/L (limited) 3 year P/L (limited) NFPA-37 Compliant Yes Yes Cold Weather Kit MG626201(sold separately) MG111102 (sold separately) Maintenance Kit MG080022 (sold separately) MG101222 (sold separately) Turnkey Extras Included Hour Meter, Battery Charger, Steel Base, External Automatic Shut-off Valve, Low Pressure Regulator, Thermally Protected Fuel System and Synthetic Oil Fuel Characteristics Fuel Consumption LP (at 1 2 load) Fuel Consumption NG (at 1 2 load) Fuel Consumption LP (at full load) Fuel Consumption NG (at full load) Battery Requirements 37.6 Ft 3 /Hr 1.04 Gal/Hr 94,000 BTU 94 Ft 3 /Hr 94,000 BTU 56.4 Ft 3 /Hr 1.57 Gal/Hr 141,000 BTU 121 Ft 3 /Hr 121,000 BTU 42.8 Ft 3 /Hr 1.18 Gal/Hr 107,000 BTU 111 Ft 3 /Hr 111,000 BTU 65.6 Ft 3 /Hr 1.82 Gal/Hr 164,000 BTU 169 Ft 3 /Hr 169,000 BTU Volts (standard/cold start) 12 Volt DC 12 Volt DC Minimum AMPS (standard/cold start) 540 CCA / 800 CCA 540 CCA / 800 CCA Type Wet Lead Acid Wet Lead Acid Terminal Hardware Top Post Type Top Post Type Dimensions (Max) BCI size 26 or 51 (BCI size 24 cold start, less than 32 F) BCI size 26 or 51 (BCI size 24 cold start, less than 32 F) Engine Specifications Engine 500 cc Briggs & Stratton Intek 570 cc Briggs & Stratton Commercial Vanguard V-Twin Cylinders 1 Cylinder - 4 Cycle 2 Cylinder - 4 Cycle Operating RPM 3600 3600 California Compliant Yes Yes These generators are rated in accordance with UL 2200 and CSA Standard C22.2 No. 100-04. Fuel consumption rates are estimated based on normal operating conditions. Generator operation may be greatly affected by elevation and the cycling operation of multiple electrical appliances - fuel flow rates may vary depending on these factors. Installations must strictly comply with all applicable codes, industry standards, laws and regulations, installation manual. Other Generator/ Automatic Transfer Switch manufacturers products are not compatible with Milbank Home Generator Systems. Improper installation voids all warranty. Milbank reserves the right to make changes in specifications and features shown without

Technical Specifications 8-20kW MG12002 12kW MG17001 17kW MG20003 20kW 12,000W (LP) / 10,800W (NG) 17,000W (LP) / 15,300W (NG) 20,000W (LP) / 18,000W (NG) 60 80 100 50 / 45 71 / 63.9 83.3 / 74.9 120/240V AC, Single Phase, 1.0 pf 120/240V AC, Single Phase, 1.0 pf 120/240V AC, Single Phase, 1.0 pf Brushed Brushed Brushed Less than 5% Less than 5% Less than 5% Automatic Automatic Automatic Propane (LP), Natural Gas Propane (LP), Natural Gas Propane (LP), Natural Gas 74.5 db 69.1 db, 3600 RPM, per ISO 3744 69.1 db, 3600 RPM, per ISO 3744 Yes Yes Yes Yes Yes Yes 34.6 x 39.4 x 38.5 48 x 34 x 31 48 x 34 x 31 535 484 500 Vertical Horizontal Horizontal 4 year P/L (limited) 4 year P/L (limited) 4 year P/L (limited) Yes Yes Yes MG111102 (sold separately) MG623101 (sold separately) MG623101 (sold separately) MG121822 (sold separately) MG151822 (sold separately) MG151822 (sold separately) Hour Meter, Battery Charger, Steel Base, External Automatic Shut-off Valve, Low Pressure Regulator, Thermally Protected Fuel System and Synthetic Oil, Wired Remote Status Monitor Hour Meter, Battery Charger, Steel Base, External Automatic Shut-off Valve, Low Pressure Regulator, Thermally Protected Fuel System and Synthetic Oil 27 8-20kW 51 Ft 3 /Hr 1.42 Gal/Hr 127,000 BTU 119.46 Ft 3 /Hr 119,460 BTU 85.32 Ft 3 /Hr 2.37 Gal/Hr 213,000 BTU 197 Ft 3 /Hr 197,000 BTU 74 Ft 3 /Hr 2.06 Gal/Hr 185,000 BTU 170 Ft 3 /Hr 170,000 BTU 118 Ft 3 /Hr 3.28 Gal/Hr 295,000 BTU 248 Ft 3 /Hr 248,000 BTU 83 Ft 3 /Hr 2.31 Gal/Hr 207,500 BTU 187 Ft 3 /Hr 187,000 BTU 135 Ft 3 /Hr 3.75 Gal/Hr 337,500 BTU 260 Ft 3 /Hr 260,000 BTU 12 Volt DC 12 Volt DC 12 Volt DC 600 CCA 540 CCA / 630 CCA 540 CCA / 630 CCA Absorbed Glass Mat Wet Lead Acid Wet Lead Acid M6 Hardware Top Post Type Top Post Type 5.5 W x 9 L x 8.9 H (including posts) BCI size 26 (BCI size 75 cold start, less than 32 F) BCI size 26 (BCI size 75 cold start, less than 32 F) 803 cc Briggs & Stratton Professional Series TM V-Twin 993 cc Briggs & Stratton Commercial Vanguard V-Twin 2 Cylinder - 4 Cycle 2 Cylinder - 4 Cycle 2 Cylinder - 4 Cycle 3600 3600 3600 Yes Available Fall 2013 Available Summer 2013 notice or discontinue the product described at any time without notice or obligation. Current model available is 15kW CARB.

28 30-60kW Model Number Technical Specifications 30-60kW MG30208 30kW [3ø] MG35001 35kW Watts LP/NG 30,000W (LP) / 30,000W (NG) 35,000W (LP) / 32,000W (NG) Main Breaker (Amps) 125 175 Amps LP/NG 104 / 104 145 / 133 Voltage 120/208V AC, Three Phase,.8 pf (139/240 3ø available by quote) 120/240V AC, Single Phase, 1.0 pf Alternator Brushless Brushless Harmonic Distortion Less than 5% Less than 5% Voltage Regulation Automatic Automatic Fuel Type Propane (LP), Natural Gas Propane (LP), Natural Gas Sound Rating (at 7 Meters) 65dB 65dB Full Pressure Lubrication Yes Yes Overcrank Protection Yes Yes Dimensions (in inches: L x W x H) 84.4 x 39.5 x 42.5 84.4 x 39.5 x 42.5 Weight (Generator Only) 1,470 1,470 Orientation Horizontal Horizontal Limited Warranty* 4 year P/L (limited) 4 year P/L (limited) NFPA-37 Compliant No No Engine Block Heater MG624101 (sold separately) MG624101 (sold separately) Maintenance Kit MG300022 (sold separately) MG300022 (sold separately) Turnkey Extras Included Fuel Characteristics Fuel Consumption LP (at 1 2 load) Fuel Consumption NG (at 1 2 load) Fuel Consumption LP (at full load) Fuel Consumption NG (at full load) Battery Requirements Hour Meter, Battery Charger, and API SL 10W-30 Oil 106 Ft 3 /Hr 2.8 Gal/Hr 265,000 BTU 263 Ft 3 /Hr 263,000 BTU 168 Ft 3 /Hr 4.4 Gal/Hr 420,000 BTU 431 Ft 3 /Hr 431,000 BTU Hour Meter, Battery Charger, and API SL 10W-30 Oil 117 Ft 3 /Hr 3.1 Gal/Hr 292,900 BTU 282 Ft 3 /Hr 282,000 BTU 186 Ft 3 /Hr 4.9 Gal/Hr 465,100 BTU 458 Ft 3 /Hr 458,800 BTU Volts (standard/cold start) 12 Volt DC 12 Volt DC Minimum AMPS (standard/cold start) 650 CCA 650 CCA Type VRLA (Valve Regulated Lead Acid) VRLA (Valve Regulated Lead Acid) Terminal Hardware Top Post Type Top Post Type Dimensions (Max) 7.5 x 11.25 x 10.0 7.5 x 11.25 x 10.0 Engine Specifications Engine GM Vortec TM 3.0L Industrial Powertrain GM Vortec TM 3.0L Industrial Powertrain Cylinders Inline 4 Cylinder, 4-Cycle Inline 4 Cylinder, 4-Cycle Operating RPM 1800 1800 California Compliant Yes Yes These generators are rated in accordance with UL 2200 and CSA Standard C22.2 No. 100-04. Fuel consumption rates are estimated based on normal operating conditions. Generator operation may be greatly affected by elevation and the cycling operation of multiple electrical appliances - fuel flow rates may vary depending on these factors. Installations must strictly comply with all applicable codes, industry standards, laws and regulations, installation manual. Other Generator/Automatic Transfer Switch manufacturers products are not compatible with Milbank Home Generator Systems. Improper installation voids all warranty. Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the product described at any time without notice or obligation.

Technical Specifications 30-60kW MG450001 45kW MG450208 48kW [3ø] MG60001 60kW MG60208 62kW [3ø] 45,000W (LP) / 45,000W (NG) 48,000W (LP) / 45,000W (NG) 60,000W (LP) / 55,000W (NG) 62,000W (LP) / 55,000W (NG) 225 200 300 225 187.5 / 187.5 167 / 156 220 / 229 215/ 191 120/240V AC, Single Phase, 1.0 pf 120/208V AC, Three Phase,.8 pf (139/240 3ø available by quote) 120/240V AC, Single Phase, 1.0 pf 120/208V AC, Three Phase,.8 pf (139/240 3ø available by quote) Brushless Brushless Brushless Brushless v Less than 5% Less than 5% Less than 5% Automatic Automatic Automatic Automatic Propane (LP), Natural Gas Propane (LP), Natural Gas Propane (LP), Natural Gas Propane (LP), Natural Gas 66dB 65dB 66dB 66dB Yes Yes Yes Yes Yes Yes 98.4 x 39.5 x 44.5 98.4 x 39.5 x 44.5 98.4 x 39.5 x 4 4.5 98.4 x 39.5 x 4 4.5 1,890 1,890 2,120 2,120 Horizontal Horizontal Horizontal Horizontal 4 year P/L (limited) 4 year P/L (limited) 4 year P/L (limited) 4 year P/L (limited) No No No No MG624201 (sold separately) MG624201 (sold separately) MG624201 (sold separately) MG624201 (sold separately) MG450022 (sold separately) MG450022 (sold separately) MG450022 (sold separately) MG450022 (sold separately) Hour Meter, Battery Charger, and API SL 10W-30 Oil Hour Meter, Battery Charger, and API SL 10W-30 Oil Hour Meter, Battery Charger, and API SL 10W-30 Oil Hour Meter, Battery Charger, and API SL 10W-30 Oil 29 30-60kW 173 Ft 3 /Hr 4.5 Gal/Hr 432,500 BTU 183 Ft 3 /Hr 4.8 Gal/Hr 462,500 BTU 200 Ft 3 /Hr 5.2 Gal/Hr 500,000 BTU 200 Ft 3 /Hr 5.2 Gal/Hr 500,000 BTU 429 Ft 3 /Hr 429,000 BTU 429 Ft 3 /Hr 429,000 BTU 463 Ft 3 /Hr 463,000 BTU 463 Ft 3 /Hr 463,000 BTU 294 Ft 3 /Hr 7.7 Gal/Hr 735,000 BTU 314 Ft 3 /Hr 8.2 Gal/Hr 785,000 BTU 345 Ft 3 /Hr 9 Gal/Hr 862,500 BTU 345 Ft 3 /Hr 9 Gal/Hr 862,500 BTU 717 Ft 3 /Hr 717,000 BTU 717 Ft 3 /Hr 717,000 BTU 788 Ft 3 /Hr 788,000 BTU 788 Ft 3 /Hr 788,000 BTU 12 Volt DC 12 Volt DC 12 Volt DC 12 Volt DC 650 CCA 650 CCA 650 CCA 650 CCA VRLA (Valve Regulated Lead Acid) VRLA (Valve Regulated Lead Acid) VRLA (Valve Regulated Lead Acid) VRLA (Valve Regulated Lead Acid) Top Post Type Top Post Type Top Post Type Top Post Type 7.5 x 11.25 x 10.0 7.5 x 11.25 x 10.0 7.5 x 11.25 x 10.0 7.5 x 11.25 x 10.0 GM Vortec TM 5.0L Industrial Powertrain GM Vortec TM 5.0L Industrial Powertrain GM Vortec TM 5.7L Industrial Powertrain GM Vortec TM 5.7L Industrial Powertrain 8 Cylinder, 4-Cycle 8 Cylinder, 4-Cycle 8 Cylinder, 4-Cycle 8 Cylinder, 4-Cycle 1800 1800 1800 1800 Yes Yes Yes Yes

30 Transfer Switches Technical Specifications Transfer Switches Model Number MG0503120 MG1003162 MG1003002 MG2003002 MG1003992 Compatible generator units MG08001 MG10002 MG08001 MG10002 MG12002 MG17001 MG20003 MG08001 MG10002 MG12002 MG17001 MG20003 MG08001 MG10002 MG12002 MG17001 MG20003 MG08001 MG10002 MG12002 MG17001 MG20003 Phase Single Phase 240V Single Phase 240V Single Phase 240V Single Phase 240V Single Phase 240V Limited Warranty 3 Years 3 Years 3 Years 3 Years 3 Years Circuits 12 16 Whole House Whole House Whole House Amps 50A 100A 200A 200A 100A Service entrance disconnect No No No No Yes Dimensions (L x W x H) 14.25 x 6 x 21 14 x 6 x 24 12" x 6" x 16" 12 x 6 x 22 16 x 7 x 22 Weight 29 lbs. 39 lbs. 24 lbs. 37 lbs. 38 lbs. Common features 120/240 Voltage, 2 Poles, 60Hz NEMA 3R Enclosure, UL 1008 Listed Power management No Patented Power Management Technology Included *Must order part #MG07033 to be compatible (contact Milbank sales office for questions). **Can only be ordered with a home standby generator. Installer is required to review local codes prior to installation to determine if a transfer switch with separate service disconnect is required. All installations must strictly comply with all applicable codes, industry standards, laws and regulations, installation manual. Other Generator/Automatic Transfer Switch manufacturers products are not compatible with Milbank Home Generator Systems. Improper installation voids all warranty. Milbank reserves the right to make changes in specifications and features shown without notice or discontinue the product described at any time without notice or obligation.