ROFU 50BC Series Door Closers Specifications U.L. Listing All Yale 50 Series Door Closers with non-hold-open arms are listed by Underwriters Laboratories, Inc. for use on labeled fire doors. Tri-Pack Closer packed with brackets for regular arm, top jamb or parallel arm installation. Non-Handed Installs on doors of either hand or swing. Aluminum Alloy Shell Lightweight, with proven durability. Adjustable Closing/Sweep Speed Independent regulating valve; hex-key operated. Adjustable Latch Speed Independent regulating valve; hexkey operated. Adjustable Backcheck Cushioning Independent regulating valve; hex-key operated. Supplied Standard. Non-Critical Valves All control valves are non-critical; 1/8" hex-key operated. Non-Hold-Open Arm Supplied as standard. Finishes SB (689) Aluminum Sprayed, 313 (685) Dark Amber Sprayed, BL (691) Light Bronze Sprayed, 315 (693) Black Sprayed, GB (696) Satin Brass Sprayed, STAT (690) Dark Bronze Sprayed, SRI Prime Coat Corrosion Inhibitor. Options Anti-Gust Closer Increased opening forces at 45º and beyond to assure control in windy installation; size 5 closer, non-holdopen only; furnished with backcheck; 55A, PA55A or TJ55A. Hold-Open Arm Can be templated and adjusted for 90º to 180º hold-open; order 150 series. Adjustable Delayed Action Closing Delays closing at any point beyond 70º of door opening; for handicapped or elderly traffic, order 50DL Series; backcheck cushioning is not available in a delayed action closer. Low Profile Arm Requires only 1" clearance, for low ceilings or narrow top rails; non-hold-open only; order 250 or PA250 Series. Y ALE SECURITY GROUP 50BC Series Door Closer Sizing Chart for s Interior Suggested Max. Door Size Closer TJ PA & Corner Bracket 32" 52 52* 52 36" 53 38" 53 53* 42" 54 48" 54 54* 55 54" 55 53* 56 Exterior Suggested Max. Door Size Closer TJ PA & Corner Bracket 30" 52 52* 53 34" 53 53* 54 42" 54 54* 55 48" 55 55* 56 *The standard Yale 50 Series Tri-Pack Door Closer can be installed top jamb with reveals 0-3. For frame reveals 3-7 order TJ50 Series Door Closers.All dimensions for reference only. Door sizing information is based on installation on standard weight door, 7 0 high and 1-3/4" thick; hung on anti-friction hinges and operating under normal conditions. Doors in excess of 7 8 high or 1-3/4 thick, unusually heavy doors or doors subject to wind or draft conditions will generally require the next larger size from that shown in this chart. Doors templated or openings beyond 150º will require the next larger size closer from that shown in the chart. Ordering Information Application Prefix Option TJ - closer installs top jamb Defines the basic 50 Series Door Closer Determines Closer Size: 2, 3, 4, 5 or 6 TJ 152-A Determines the Arm Function 1 - Hold Open Arm 2 - Low Profile Arm Suffix: Determines Miscellaneous : 546 Toll Free: (800) 221-2052 Phone: (718) 622-8785 Fax: (718) 789-8346 http://www.mfsales.com e-mail: pilgrim@mfsales.com
Y ALE SECURITY GROUP 50BC Series Door Closer Regular Arm Hold-Open Arm 50-3 Arm assembly becomes No. 50-8 when 588 Soffit Bracket is added to adapt the standard arm for parallel arm mounting. 588 Soffit Bracket Use with Hold-Open Arm. Closer mounted on door top rail with arm jamb bracket to frame face. Dimensions (E) Closer Size 2,3,4,5,6 Non-Hold Open 1-3/8", Low Profile 1", Hold Open 1-5/8" Parallel Arm Corner Bracket 2350 Non-Hold-Open or Hold-Open permits closer mounting on stop side of door where other installations are not possible, clears most door holders. 2350 Corner Bracket fits all 50 Series closers. HINGE or PIVOT A 5/8 REF 5-1/2 292 Bull Nose Bracket Molded/Bull Nose Trim, Hold-Open 292 Bracket accommodates frame rabbets to 2" deep. C 2-5/8 9-3/4 7-1/8 * When templated for 100º door opening. Closer mounted on door top rail. Bracket on frame soffit. Dimensions (A) Without Drop Plate 5",With 214 Drop Plate 3-1/8" (C*) Template Position 7-1/4" Top Jamb 291A Bull Nose Bracket 291A Bracket Accommodates frame rabbets between 2" and " deep. 294 Hold Open Adapter Plate Replacement Hold-Open Adapter Plate for converting old installations with 2-1/2" hole-spacing bracket to the new hold-open bracket with 1-3/4" spacing. 294 Adapter Plate. Standard Parallel Arm Bracket, Non-Hold-Open supplied with Tri-Pack closer for parallel arm mounting. 289A Bracket. 214 Narrow Top Rail Drop Plate Narrow Top Rail permits closer mounting on as little as 2-5/8 top rail. 214 Drop Plate sizes 4, 5 & 6. Closer mounted on frame face, arm jamb bracket to top door rail. 50 Series Accessories 587 Top Jamb Plate Overhead Holder Clearance places centerline of arm jamb bracket 2-1/4" from top of door. 587 Plate. Overhead Holder-Extra Clearance places centerline of arm jamb bracket "from top of door. 214 Plate. Non-Hold-Open Arm 50-1 Arm assembly becomes No. 50-5 when 289A Soffit Bracket is substituted for the standard arm shoe. 289A Soffit Bracket Use with Non-Hold-Open Arm. 547
ROFU Overview Specifications The Yale 1900 Series Closers with non-hold open arms are U.L. Listed for self-closing fire doors. May be adjusted to comply with requirements of the Americans With disabilities Act (A.D.A.) and ANSI Standard A117.1. Parallel Arm One Size Aluminum Housing Closer is housed in special aluminum alloy shell selected for its ability to provide optimum performance. One body size provides simplified templating and installation. Adjustable Spring Power Clock type coil spring allows incremental adjustment of closer power to meet individual installation needs. The closing force can be increased by at least 50% over the minimum closing force for each closer size. A spanner wrench is provided with each closer for power adjustment. Adjustable Backcheck Cushioning An independent regulating valve is provided for increasing or decreasing the strength of the backcheck cushioning with a 1/8 hex-key. Non-Hold-Open Arms Supplied standard with closer. Arms are non-handed. Field Reversible Closer spring can be reversed to accommodate the hand of the installation when arms are non-handed. To save time and costs on the job site, it is recommended to order the closer for the proper hand of door. Finishes SB (689) Aluminum Sprayed, BL (691) Light Bronze Sprayed, 315 (693) Black Sprayed, GB (696) Satin Brass Sprayed, STAT (690) Dark Bronze Sprayed. Options Y ALE SECURITY GROUP 1900 Series Door Closer Hold-Open Arms Permit door to be held open at any point between 90º and 180º by using different closer mounting locations. Hold-open arms are non-handed for standard arm and corner bracket installations. Hold-open arms are handed for parallel arm and rigid parallel arm installations. Delayed Action Closing Closer s initial closing speed at the beginning of the closing cycle (from full open down to approximately 70º) is adjustable, allowing slow moving traffic to pass through the opening before the closer begins its normal closing speed. For standard arm non-hold-open closers only. Delayed action closers are handed. They are not available with backcheck cushioning. Parallel Rigid Arm For applications where heavy traffic and usage are expected. Supplied with a heavy duty arm and soffit bracket (PA Bracket).Available hold open and non-hold open. Ordering Information Application Prefix Type of Mounting None - Standard Arm PA - Parallel Arm PR - Rigid Parallel Arm Basic Series Number Determines the Arm Function 0 - Non-Hold Open 1 - Hold Open Arm Determines Closer Size: 2 (2/4), 3 (2/4), 4 (2/4), 5 (5/6) or 6 (5/6) Finish PA 19 0 2/4 DL SB Suffix: DL - Delayed Action (Regular Non-Hold-Open Arm Application Only) Door Size and List Number Max. Door Size Standard Arm Max.Door Size Type List Number Wood or Metal Function List Number Wood or Metal with Arm Function Interior Exterior Interior Exterior Corner Bracket Parallel Arm* 48" 36" 1902/4 NHO 42" 36" 1902/4 x Bracket PA1092/4 NHO 1912/4 HO 1912/4 x Bracket PA1912/4 HO 44" 1905/6 NHO 44" 1905/6 x Bracket PA1095/6 NHO 1915/6 HO 1915/6 x Bracket PA1915/6 HO *For Rigid Parallel Arm prefix the list number with PR. Door sizing information is based on installation on standard weight doors, 7 0 high x 1-3/4 thick; hung on anti-friction hinges and operating under normal conditions. NHO - Non-Hold Open Arm HO - Hold-Open 548 Toll Free: (800) 221-2052 Phone: (718) 622-8785 Fax: (718) 789-8346 http://www.mfsales.com e-mail: pilgrim@mfsales.com
Y ALE SECURITY GROUP 1900 Series Door Closer Regular Arm On standard installations the closer body is mounted to the door on the pull or hinge side with the arm bracket mounted to the frame face above the door. This installation provides optimum closer power and control for door openings to 135º where wall clearance permits. Hinge or Pivot 3-3/8 Parallel Arm The closer body is mounted to the door on the push or opposite to hinge side and the arm bracket is mounted to the frame soffit. Requires 289 Parallel Arm Bracket. Hinge or Pivot 5/8 7-1/2 Regular Arm 5 4 B 4-1/2 Corner Bracket On corner bracket installations the corner bracket and closer body are fastened to the frame soffit/stop on the push or opposite to hinge side of the door. The closer arm jamb bracket is mounted to the top rail of the door. Permits door openings to 180º, wall conditions permitting. Corner bracket installation is generally used where conditions prevent application of the closer body to the door. Requires 1950 Corner Bracket. NOTE: The use of a frame mounted closer bracket requires a door closer of the opposite hand from that of the door. Accessories C L Hinge or Pivot 4-7/8 289 Standard Non-Hold Open Arm Soffit Bracket Supplied standard with all non-hold open parallel arm closers. Requires minimum soffit/stop width of 1". (No. 891 spacer block may be used in conjunction with this bracket to provide arm clearance on blade stop frames. 1950 Corner Bracket For installations where there is no conflict with other door hardware or weatherstripping. Requires a minimum soffit/stop width of 1-3/8". 9-3/4 A 5/8 1-1/2 7-1/2 Rigid Parallel 7-5/8 Rigid Parallel Arm Closers feature a heavy duty forearm and a heavy duty soffit bracket for applications where heavy traffic and high usage are anticipated. The closer is mounted to the door s top rail on the push or opposite to hinge side and the arm bracket is mounted to the frame soffit/stop. The non-hold open arm is not handed. 5 4 7-1/2 964 Adjustable Bracket For installation on the push or opposite to hinge side of Gothic arched or circular top doors. This bracket is adjustable to accommodate virtually any frame radius. requires a minimum frame soffit/stop width of 2-1/2". C L Hinge or Pivot 974 Adjustable Bracket For installation on the pull or hinge side of Gothic arched or circular top doors. Bracket mounts on the door and raises the closer to permit the closer arm to clear the top of the door. The arm bracket mounts on the frame face. Base diameter is 3-5/8". Dimensions are given in inches unless otherwise noted. 9-3/4 9-3/4 549
ROFU 2300BC Series Economy Door Closer The 2300 Series Door Closer is a durable economically priced closer for use on both exterior and interior doors in commercial and industrial applications. It is ideal for use with narrow stile aluminum doors and frames.the 1-3/4" x 9-5/8" body size of the 2300 Series makes it especially popular as a replacement for many closers. The 2300 is a sized closer available in sizes 2, 3, 4 and 5. It is U.L. listed and backed by a five-year limited warranty. Backcheck as well as a friction hold open feature are available options.the 2300 is bi-packed for regular arm or top jamb installation. Parallel arm installation is available by ordering the optional 2289 PA Bracket. The 2300 Series Door Closer is available in the following finishes: SB (689) Aluminum Sprayed and 313 (695) Dark Amber Sprayed. Adjustable Backcheck Standard Non-handed Pinion shaft extends vertically through the closer body in both directions. This permits the closer to be positioned on either right or left hand door for all applications. A cap conceals the closer shaft not in use. Adjustable Sweep/Latch Speed A dual purpose regulating valve that permits adjustment of both sweep and latch speed. Non-Hold Open Arm Supplied as standard. U.L. Listing All Yale Series 2300 Door Closers with nonhold open arms are listed by Underwriters Laboratories, Inc. for use on labeled fire doors. Specifications ANSI/BHMA Federal Specifications:Yale 2300 Series Door Closer is an ANSI Grade 3 closer designed and manufactured to meet or exceed federal specifications. Sizing Chart for s Interior Doors Door Recommended Maximum Door Width Closer Size Inches Reg. Arm Top Jamb Para. Arm 2 34" 34" 32" 3 40" 40" 38" 4 48" 48" 46" 5 52" Exterior Doors Door Closer Size Y ALE SECURITY GROUP 2300BC Series Door Closer Recommended Maximum Door Width Inches Reg. Arm Top Jamb Para. Arm 2 30" 30" 28" 3 34" 34" 32" 4 40" 40" 36" 5 48" 48" 42" Options Hold Open Arm Can be templated and adjusted for 90º to 180º hold open. Order 2310 Series. 550 Toll Free: (800) 221-2052 Phone: (718) 622-8785 Fax: (718) 789-8346 http://www.mfsales.com e-mail: pilgrim@mfsales.com
Y ALE SECURITY GROUP 2300BC Series Door Closer Regular Arm 2-1/4 2-5/8 E 2289A Parallel Arm Bracket for Non-Hold Open Arms 4-7/8 * 9-5/8 *6-5/8 for 100º door opening Standard Soffit Plate: This soffit plate is supplied to permit parallel arm mounting. It can be mounted where the frame soffit is as narrow as 1". Minimum Ceiling Clearance Non-Hold Open 1-1/2" Top Jamb * 2-1/4 9-5/8 *6-5/8 for 100º door opening Hold Open 1-5/8" Minimum Ceiling Clearance Without Drop Plate 2-5/8" With 2388 Drop Plate 1-3/4" Minimum Top Rail 5/8 (16) Frame Stop Without Drop Plate 1-7/8" With 2388 Drop Plate 3-3/8" Parallel Arm * 2-1/4 9-5/8 *6-5/8 for 100º door opening 2-5/8 2-5/8 E E 2588 Parallel Arm Bracket for Hold-Open Arms Permits parallel arm mounting with Hold-Open arms. 2388 Drop Plate Top Jamb: for use when the door closer interferes 3-1/4 with the ceiling or the frame face is too narrow to mount closer body. This drop plate can be used to mount a closer on a frame face as narrow as 1-1/2" or less. Parallel Arm: for use where a narrow top rail prevents the closer from being mounted directly to the door surface.this drop plate can be used to mount a closer on a top rail as narrow as 2-5/8" or less. Ordering Information Defines the basic 2300 Series Door Closer Determines Closer Size: 2, 3, 4 or 5 2302 SB Determines the Arm Function 0 - Standard Non-Hold Open 9-3/4 Finish: SB (Silver Bronze) 313 (Duranotic) Minimum Top Rail 5/8 (16) Frame Stop Without Drop Plate-4 1/2" With 2388 Drop Plate 2-5/8" * Add 1/2 (13) for Hold Open Arm closers. 551
ROFU 3500 Series Door Closer Models 3501 3501BF (Barrier Free) 3501DL (Delayed Action) Spring Power Adjustment Nut Aluminum Alloy Shell Pinion Shaft Piston & Rack Backcheck Cushioning Regulating Valve Closing Speed Regulating Valve Latch Speed Regulating Valve Options Y ALE SECURITY GROUP 3500 Series Door Closer Adjustable Delayed Action Closing delays closing at any point beyond 70º of door opening; for handicapped or wheeled traffic; this feature is available along with backcheck cushioning for all 3000 Series Closers. Full Metal Cover available in sprayed or plated finishes, suffix M to the list number. Barrier-Free meets requirements of the ADA. Order 3501BF. American With Disabilities Act (A.D.A.) ANSI Standards The 3501BF Series door closers are designed to comply with requirements of the Americans With Disabilities Act (A.D.A.) and ANSI Standard A117.1. Delayed Action Closing Regulating Valve Non-handed installs on doors of either hand. Aluminum Alloy Shell lightweight, with proven durability. Rack & Pinion Operation assures smooth power transmission through entire opening and closing cycles. Adjustable Closing Speed independently regulating valve; hex-key operated. Adjustable Backcheck Cushioning independently regulating valve; hex-key operated. Non-critical Valves all control valves are non-critical; operated by a 1/8" hex-key. Positive Alignment Main-Arm Broach arm markings and pinion configuration help assure proper arm installation. Multi-size Power Adjustment for multi-size full feature closers the spring power is adjustable through a range of closer sizes: Normal Power Range Sizes 2 through 6, 3501 Series Barrier Free Power Range Sizes 1 through 4 3501BF Series Full Cover molded Tri-packed for regular, top jamb and parallel arm installation. Finishes SB (689) Aluminum Sprayed, 313 (695) Dark Amber Sprayed, BL (691) Light Bronze Sprayed, 315 (693) Black Sprayed, GB (696) Satin Brass Sprayed, STAT (690) Dark Bronze Sprayed. ANSI Specification -A156.4 Grade 1 U.L. Listing All Yale 3000 Series Door Closers with non-hold-open arms and all 3120 Series Holder/Stops with Stop only feature are listed by Underwriters Laboratories, Inc. for use on labeled fire doors. Ordering Information First Digit: Defines the basic 3000 Series Door Closer. Fourth Digit: Determines Closer Size: 1, 2, 3, 4, 5 or 6 (1-Adjustable Closer) 3501-DL Second Digit: Defines the basic feature Closer with/without cover Third Digit: Determines the Arm Function 0 - Non-Hold Open 1 - Hold Open Arm 2 - Holder/Stop 3 - Low Profile Arm Suffix: Determines Miscellaneous : X FINISH 552 Toll Free: (800) 221-2052 Phone: (718) 622-8785 Fax: (718) 789-8346 http://www.mfsales.com e-mail: pilgrim@mfsales.com
Y ALE SECURITY GROUP 3500 Series Door Closer Normal Power Closer Multi-size normal power range adjustment, sizes 2 through 6. Non-handed. Tri-packed for standard, parallel arm and TJ installations. 3501 Series Barrier Code Closer Multi-size barrier code power adjustment, sizes 1 through 4. Non-handed. Adjustable closing speed. Adjustable latch speed. Adjustable backcheck cushioning. Tri-pack installation. Optional Adjustable delayed action closing with adjustable backcheck. Regular Arm All dimensions listed are for non-hold open arm installation. C L HINGE 2-1/2 7 Top Jamb Parallel Arm G 7 G 1-3/4 All dimensions listed are for non-hold open arm installation. H H 2-1/8 2-1/8 Reveal 1-3/8 2-1/8 Typical Power Adjustments Maximum Door Size Number of Turns (360º) of Inches Adjustment Nut Power Range 2-6 Interior Exterior 30" 0 2 36" 2 4 42" 4 8 48" 7 11 Power Range 1-4 34" 1 5 36" 1 6 40" 2 7 46" 3 9 48" 4 Maximum number of 360º turns: 15 3-1/4 5-1/4 2-1/8 All dimensions listed are for non-hold open arm installation. Parallel Arm Bracket G 7-3/4 Soffit Plate used to convert the Standard Arm and Low Profile Arm. H 289A 6-1/4 553