Greenheck Quick Delivery

Greenheck Quick Delivery Greenheck Quick Delivery Stock & Quick uild Catalog Volume 25 Stock & Quick uild Catalog This catalog is being sent to you on behalf of: Volume 25

Roof & Sidewall Mounted G and G................. 4-8 CUE, CW, CUE and CW...... 10-15 USGF................. 16-17 LD, LDP, L and LP......... 18-20 E and S................ 21 RDU, RU and RUMO....... 22-23 TUD, TU-L/H and TU-C... 24-26 SF.................... 27 RSF and RSFP.............. 28 RE2, RS2, RCE3, RCS3, RE, RS, RCE, RCS............... 29-31 Utility and Centrifugal SFD and SF............. 70-73 - Utility Fan Typical Installations........ 73 SWD................. 74-75 SW................. 76-80 CSW, IDW and FDW......... 81 SCW-FRP................ 82 Centrifugal Fans - Selection Guide....... 83 2 Gravity Ventilators GRS, GRSF, FGI, FGR and RGU... 32-33 Radial lowers & Plenum IPO, IPW and IP............. 84 Plenum...................... 85 ir Circulators and Mancoolers IC and ICO.............. 34-35 MCY and MC.............. 36 Laboratory Exhaust Systems Vektor -H............... 86-87 Inline, Ceiling & Sidewall Exhaust SP and CSP............. 38-41 - Discharge ccessories......... 42-43 - Hanging Vibration Isolators......... 44 - Ceiling Radiation Dampers......... 44 - Filters and Grilles.............. 44 CF and DF............. 46-47 SQ and SQ............. 48-52 - Options and ccessories.......... 51 - Side Discharge................ 52 - Multiple Discharge Positions........ 53 - Filter ox and Insulated Housings...... 53 TC.................. 54-55 QEI-L and QEI-I/II.......... 56-57 TDI, TI-C and TI-FS....... 58-59 V.................... 60 SE, SS, SCE, SCS, SE, SS, SCE, SCS................ 62-68 - Options and ccessories.......... 64 CF.................... 69 Kitchen Ventilation Systems Type I Grease Hoods.............. 88 Grease Extraction - Filtration Options...... 89 Type II Heat and Condensate Hoods...... 89 Controls and Energy Management....... 90 External Supply Plenums............ 91 Fire Suppression................. 91 Energy Recovery Ventilators ERV and ERVe............ 92-93 MiniVent-450 and 750.......... 94 Packaged Rooftop Ventilation RV and RVE............... 95

Make-Up ir Systems DGK, DG, DGX - Direct Gas-Fired.. 96-98 IGK, IG, IGX - Indirect Gas-Fired... 99-101 KSFD and KSF - Untempered.. 102-103 Indoor ir Handlers VFCD and VFC........... 104-105 LFC and MSCF........... 106-107 Custom Coils Replacement and OEM Coils..........108 Louvers Stationary Louvers................116 Thinline Louvers.................117 Sightproof Louvers...............117 Combination Louver/Damper Louvers......118 djustable Louvers...............118 Wind-Driven Rain Louvers............119 Florida Product pproved............119 Miami-Dade Qualified Louvers & Penthouses..119 coustical Louvers...............120 Fabricated Louvers...............120 rick Vents....................121 Louver Penthouses...............121 - Louver Qualifications and Licenses......122 - Options and ccessories...........123 - Louver Finishes................123 3 Dampers Life Safety Products Ceiling Radiation Dampers..........110 Fire Dampers.................110 Smoke Dampers...............111 Combination Fire Smoke Dampers......111 Control Dampers ir Measuring Dampers............112 Insulated Thermally roken Control Dampers 112 Volume Control Dampers...........113 Face and ypass Dampers..........113 Manual alancing Dampers..........113 Remote alancing Dampers.........113 Heavy Duty/Industrial Control Dampers....114 ackdraft and Relief Dampers ackdraft Dampers..............114 Heavy Duty/Industrial ackdraft Dampers..114 arometric Relief Dampers..........115 Pressure Relief Damper............115 ccess Doors.................115 Marine Dampers................115 ccessories Mounting Options Utility, Centrifugal and Industrial Fans....124 Inline Centrifugal Fans.............124 Roof Curbs, Extensions & Equipment Supports 125 Electrical ccessories..............126 Coatings.................. 127-128 Representative Directory United States Representatives...... 129-133 Canada Representatives.............134 International Representatives....... 135-137 Index Index................ 138-139 What is a QR Code? QR is short for Quick Response. QR code, like the one on the right, is designed to be scanned by a camera on a smartphone or tablet. QR codes in our Quick Delivery catalog take you to a web page on greenheck.com with associated product information such as catalogs, instruction manuals (IOMs), specifications and drawings. To scan QR Codes you first need to download a QR Code reader app to your device. Suggested FREE readers include: iphone RedLaser, Quick Scan or QR Code Reader ndroid RedLaser, QR Droid or QR Code Reader Launch the app, then follow on-screen instructions. Using the on-screen framing guide, squarely line up the camera with the QR code and hold it steady. When the app has recognized the QR code, it will launch your Web browser and to take you to the designated web page. The app requires an internet connection and your normal data plan charges apply. www.greenheck.com

G, G Roof & Sidewall Mounted 4 UL/cUL 705 Power Ventilators E40001 - G and G UL/cUL Listed 705 is standard on In Stock models Greenheck Fan Corporation certifies that the G and G shown herein are licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and Publication 311 and comply with the requirements of the MC Certified Ratings Program. G-060 through 095, 099 through 143 G-071 through 200, 240 and 300 G-097 and 098 163 and 203 G-220, 260, 330 through 540 High Pressure G 101HP through 360HP est vailable Program In Stock G Direct Drive and G elt Drive Centrifugal downblast fans are designed for clean air exhaust applications requiring roof mounting. Standard Construction G G Housing - aluminum Wheel - backward-inclined, aluminum irdscreen - galvanized Corrosion-resistant fasteners NEM-1 disconnect switch all bearing motor - 1/4 hp and larger Double-studded vibration isolators Three speed motor - sizes 060 through 095 Lifting lugs djustable motor pulley Options and ccessories Stock G G Vari-Green motor - 80% turndown, 85% efficient vailable as standard on select sizes Damper Hinged curb cap with cables Roof curb Roof curb accessories - seals, adaptors, extensions Speed control irdscreen - aluminum, stainless steel Tie-down points NEM rated disconnect switch Dual drives Relubricatable bearings Decorative or protective powder coating Certified for high wind and seismic applications UL/cUL Listed Power Ventilators UL/cUL Listed Power Ventilators for Smoke Control Systems Select sizes and models with the Vari-Green motor are available in stock. Dimensions for G, G C* Nominal Sq. s Damper Roof Curb Roof Opening C* 1¾ inch 060, 065, 070, 075 17 19 3 8 12 1 8 8 17 10 1 2 080, 085, 090, 095 17 21 3 4 14 5 8 10 17 12 1 2 071, 081, 091, 097, 098, 099, 101, 103, 121, 123 19 24 3 8 23 3 4 12 19 14 1 2 131, 133 19 28 3 8 23 3 4 12 19 14 1 2 141, 143, 161, 163 22 28 3 8 23 3 4 16 22 18 1 2 180, 183, 200, 203 30 35 1 2 28 18 30 20 1 2 220, 240 34 42 3 4 31 1 2 24 34 26 1 2 260, 300 40 50 36 30 40 32 1 2 330, 360 46 58 3 4 38 1 2 36 46 38 1 2 420 52 65 1 4 44 42 52 44 1 2 480 58 73 3 4 47 1 4 48 58 50 1 2 500, 540 64 83 50 3 4 54 64 56 1 2 ll dimensions are in inches. Dimension given is the inside dimension of the curb cap. *May be greater depending on motor. www.greenheck.com Centrifugal Roof Exhaust Fans For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

Performance for G 060 065 070 075 080 085 090 095 Quick CFM / Static Pressure in inches wg Max In Stock Motor Max Sones uild Fan HP hp @.25 est 0.125.25.375.5.625.75.875 1 RPM Direct Drive vailable 138 73 1/200 1050 0.01 1.7* 170 125 1/100 1300 0.01 2.9* G-060-DGEX-QD 203 166 120 1/60 1550 0.02 3.7 226 193 155 101 1/6 1725 0.02 4.7 187 110 1/100 1050 0.01 2.2* 231 178 92 1/60 1300 0.01 2.7 G-065-DGEX-QD 276 232 176 96 1/30 1550 0.02 4.3 307 268 223 160 1/6 1725 0.03 5.7 253 179 1/100 1050 0.01 2.7* 314 257 171 1/60 1300 0.02 2.6 G-070-DGEX-QD 374 327 274 190 1/30 1550 0.03 4.7 416 375 329 270 1/6 1725 0.04 6.3 297 200 1/80 1050 0.01 3.6* 367 293 195 1/50 1300 0.02 3.5 G-075-DGEX-QD 438 377 309 214 1/25 1550 0.04 4.9 487 432 374 306 1/6 1725 0.05 6.2 335 249 134 1/40 1050 0.02 4.2 415 348 272 174 1/30 1300 0.03 5.5 G-080-DGEX-QD 495 439 379 314 237 1/20 1550 0.06 7.2 551 501 449 392 332 260 1/6 1725 0.08 8.9 398 307 179 1/40 1050 0.02 4.3 493 420 340 233 1/30 1300 0.04 5.3 G-085-DGEX-QD 588 528 464 394 308 168 1/20 1550 0.06 7.4 654 602 544 486 419 340 222 1/6 1725 0.09 9.3 G-085-VG6X-QD 520 420 293 1/40 1050 0.02 4.2 644 565 478 373 1/25 1300 0.05 5.5 G-090-DGEX-QD 768 701 633 557 473 338 1/15 1550 0.08 7.4 855 794 735 671 600 522 1/6 1725 0.11 9.4 717 570 389 1/30 1050 0.04 4.5 888 780 640 493 184 1/12 1300 0.07 6.4 G-095-DGEX-QD 1059 969 863 745 623 474 1/8 1550 0.12 8.8 1179 1098 1013 903 800 688 554 279 1/6 1725 0.16 11.2 G-095-VG6X-QD *Sones displayed are at greatest wg shown with cfm Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings include the effects of a birdscreen. The sound ratings shown are loudness values in hemispherical sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : Free inlet hemispherical sone levels. 5 G, G

G, G 6 Performance for G, G 071 & 097 081 & 098 091 & 099 101 & 103 121 & 123 131 & 133 141 & 143 161 & 163 180 & 183 200 & 203 220 240 Quick CFM / Static Pressure in inches wg Max In Stock Motor Max Sones uild Fan HP hp @.25 est 0.25.375.5.625.75 1 1.25 1.5 RPM elt Drive Direct Drive vailable 187 101 1/8 860 0.016 2.7 248 187 152 109 1/6 1140 0.039 5.1 274 220 188 157 114 1/4 1256 0.051 6.5 G-071-4X-QD-R2 376 339 316 297 273 250 205 1/4 1725 0.13 11.2 G-071-4X-QD-R3 431 261 1/8 860 0.023 3.4 571 460 396 283 1/6 1140 0.056 6.1 629 530 476 410 294 1/4 1256 0.075 7.7 G-081-4X-QD-R2 864 793 756 719 679 640 527 1/4 1725 0.19 12.3 G-081-4X-QD-R3 652 400 1/8 860 0.032 4.5 864 687 590 457 1/6 1140 0.074 7.6 952 793 707 614 483 1/4 1256 0.10 9.3 G-091-4X-QD-R2 1307 1192 1135 1076 1013 949 806 515 1/4 1725 0.26 13.4 G-099-VG4X-QD 729 473 1/8 860 0.036 2.9 966 805 702 507 1/6 1140 0.085 5.7 G-103-X-QD 1187 1052 990 909 810 634 1/4 1400 0.16 8.9 G-101-4X-QD-R3 G-103-X-QD 1462 1351 1298 1250 1193 1126 955 1/4 1725 0.29 11.5 G-103-VG4X-QD 1526 1419 1368 1321 1270 1209 1065 793 1/3 1800 0.33 12.5 G-101-LMDX-QD 1043 796 580 1/8 860 0.062 5.2 1383 1213 1112 993 831 1/6 1140 0.14 8.4 G-123-X-QD 1692 1557 1484 1404 1315 1214 907 1/4 1395 0.26 12.3 G-121-4X-QD 1880 1759 1696 1629 1555 1475 1289 974 1/3 1550 0.36 14.3 2093 1984 1928 1871 1810 1743 1600 1426 1180 1/2 1725 0.50 17.0 G-121-LMDX-QD G-123-X-QD G-123-VG5X-QD 1221 962 727 1/8 860 0.074 6.3 1618 1444 1340 1211 1031 1/6 1140 0.17 9.6 G-133-X-QD 1866 1718 1637 1545 1435 1305 1/4 1315 0.26 12.5 G-131-4X-QD 2044 1911 1838 1759 1674 1571 1299 1/3 1440 0.35 15.1 2391 2279 2219 2158 2020 1946 1857 1654 1312 1/2 1685 0.56 16.3 G-133-X-QD 2448 2338 2281 2220 2159 2089 1935 1746 1474 3/4 1725 0.60 16.7 G-131-LMDX-QD G-133-VG7X-QD 1595 1304 1085 1/4 860 0.13 6.6 G-141-4X-QD 2115 1905 1792 1660 1488 1233 1/3 1140 0.31 10.4 2523 2347 2259 2166 2062 1943 1602 1/2 1360 0.53 13.9 G-141-5X-QD 2875 2719 2644 2566 2487 2396 2191 1910 1297 3/4 1550 0.79 17.4 G-143-VG7X-QD 3200 3059 2991 2923 2853 2782 2619 2427 2184 1 1725 1.09 20 G-141-LMDX-QD 2540 2145 1913 1596 1/4 860 0.26 9.6 2791 2434 2236 2010 1692 1/3 945 0.34 11.5 3367 3072 2922 2761 2587 2382 1808 1/2 1140 0.60 14.9 3692 3422 3289 3149 2997 2838 2444 3/4 1250 0.79 17.0 G-161-LMDX-QD 4062 3815 3694 3571 3444 3304 3007 2609 2073 1 1375 1.05 19.6 4652 4437 4330 4225 4118 4007 3769 3512 3198 1 1 2 1575 1.57 25 2839 2469 2213 1882 1/4 730 0.26 7.2 3150 2832 2624 2375 2053 1/3 810 0.35 8.7 3655 3388 3234 3052 2844 2601 1/2 940 0.55 12.0 4102 3867 3742 3596 3432 3252 2811 3/4 1055 0.77 14.9 G-180-LMDX-QD 4608 4401 4290 4179 4046 3900 3575 3178 2499 1 1185 1.10 17.8 5191 5010 4913 4814 4716 4599 4344 4052 3713 1 1 2 1335 1.57 21 5677 5514 5425 5336 5246 5155 4938 4699 4426 2 1460 2.05 24 3320 2637 2089 1/4 600 0.26 7.3 3680 3085 2706 2087 1/3 665 0.35 8.5 4261 3744 3477 3141 2643 1/2 770 0.55 10.7 4759 4289 4068 3811 3504 3085 3/4 860 0.77 12.9 G-200-LMDX-QD 5340 4927 4720 4520 4285 4015 3240 1 965 1.09 15.4 6032 5682 5473 5301 5124 4925 4450 3751 1 1 2 1090 1.57 18.9 6640 6336 6145 5969 5813 5651 5274 4829 4177 2 1200 2.09 23 3799 3132 2542 1/4 500 0.26 7.9 4179 3629 3158 2526 1/3 550 0.35 8.9 4863 4403 4120 3702 3208 1/2 640 0.55 12.1 Not 5395 4990 4762 4459 4077 3633 3/4 710 0.75 14.4 vailable 6079 5732 5530 5326 5049 4716 3929 1 800 1.07 16.1 6801 6501 6323 6142 5960 5723 5122 4401 1 1 2 895 1.50 18.8 7485 7212 7062 6898 6734 6568 6107 5548 4883 2 985 2.00 23 4223 3188 2036 1/4 460 0.27 5.7 4637 3761 3060 1/3 505 0.35 6.9 5371 4666 4195 3562 2112 1/2 585 0.55 9.1 6060 5449 5094 4636 4073 3127 3/4 660 0.79 11.8 6702 6158 5861 5507 5077 4567 1 730 1.06 14.3 7575 7092 6844 6574 6261 5901 5002 1 1 2 825 1.54 17.7 8355 7916 7700 7467 7215 6933 6240 5388 3707 2 910 2.06 21 G-240-LMDX-QD Not vailable Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings include the effects of a birdscreen. The sound ratings shown are loudness values in hemispherical sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : Free inlet hemispherical sone levels.

Performance for G Quick CFM / Static Pressure in inches wg Max In Stock Motor Max Sones uild Fan HP hp @.25 est 0.25.375.5.625.75 1 1.25 1.5 RPM elt Drive vailable 4714 3393 2010 1/4 365 0.26 8.6 5231 4095 3296 1/3 405 0.35 10.3 6005 5063 4484 3745 2322 1/2 465 0.54 10.4 260 6716 5898 5413 4869 4190 3008 3/4 520 0.75 11.3 7491 6775 6363 5912 5418 4826 1 580 1.04 13.0 8588 7979 7637 7274 6884 6474 5465 3608 1 1 2 665 1.57 15.8 9493 8938 8652 8335 8001 7649 6878 5916 4236 2 735 2.13 18.3 10784 10292 10055 9794 9514 9225 8606 7932 7157 3 835 3.12 22 5912 4340 1/3 365 0.35 5.7 6803 5537 4641 1/2 420 0.53 7.0 7694 6616 5955 5095 3/4 475 0.77 9.6 300 8585 7640 7094 6456 5668 4195 1 530 1.07 12.2 9719 8907 8446 7952 7388 6721 1 1 2 600 1.55 14.9 G-300-LMDX-QD 10772 10060 9648 9228 8773 8269 7025 2 665 2.12 17.7 12311 11704 11357 10997 10629 10242 9369 8293 6437 3 760 3.17 21 14416 13898 13639 13335 13028 12716 12073 11379 10536 5 890 5.09 28 6643 4308 1/3 275 0.31 5.2 7850 6036 4757 1/2 325 0.52 7.4 8937 7410 6480 5257 3/4 370 0.76 9.2 330 10024 8713 7927 7050 5937 1 415 1.07 11.3 11232 10087 9425 8706 7919 6966 1 1 2 465 1.51 14.0 12319 11294 10719 10085 9420 8696 6472 2 510 2.00 16.6 14251 13376 12908 12408 11864 11307 10081 8536 3 590 3.09 21 16908 16185 15798 15408 14987 14564 13624 12640 11538 5 700 5.17 27 8693 6756 5001 1/2 325 0.56 6.8 9763 8109 7013 3/4 365 0.79 8.9 10966 9558 8686 7641 1 410 1.12 11.9 360 12304 11085 10360 9568 8607 7096 1 1 2 460 1.59 14.8 13507 12431 11795 11096 10368 9473 2 505 2.10 17.3 15513 14614 14077 13523 12917 12289 10813 3 580 3.18 22 18322 17560 17179 16711 16243 15774 14710 13535 12119 5 685 5.24 29 9890 6365 1/2 240 0.50 4.9 11332 8698 3/4 275 0.76 5.6 12568 10320 8672 1 305 1.03 7.5 420 14217 12411 11102 9463 1 1 2 345 1.50 10.8 15659 14043 12983 11787 10108 2 380 2.00 13.3 17925 16540 15792 14790 13764 12502 3 435 3.00 17.8 21222 20081 19459 18826 18046 17162 15254 12312 5 515 4.98 23 24725 23765 23243 22709 22166 21621 20104 18585 16590 7 1 2 600 7.88 30 12020 6529 1/2 200 0.54 7.3 13523 9500 3/4 225 0.77 7.6 15025 11662 8820 1 250 1.06 8.6 480 17129 14379 12517 9587 1 1 2 285 1.58 10.7 18631 16135 14589 12656 2 310 2.02 12.2 21636 19548 18385 17010 15420 13507 3 360 3.21 16.4 25543 23801 22868 21883 20799 19550 16604 5 425 5.22 23 29149 27623 26860 26016 25153 24290 22106 19517 7 1 2 485 7.78 31 17245 12242 1 214 1.04 8.7 19743 15481 12983 1 1 2 245 1.57 11.0 21677 17857 15752 2 269 2.08 13.2 500 24820 21627 19752 17903 15284 3 308 3.11 16.9 29494 26834 25429 23831 22310 20688 5 366 5.24 21 33764 31467 30265 29015 27607 26276 23486 7 1 2 419 7.88 27 37068 34991 33900 32805 31625 30342 27917 25310 10 460 10.41 32 18143 12632 1 205 1.04 8.1 20798 16229 12673 1 1 2 235 1.57 10.5 22922 18963 16439 2 259 2.11 11.9 540 26197 22870 20831 18610 3 296 3.14 15.3 31064 28492 26810 25115 21376 5 351 5.24 19.9 35578 33552 32075 30612 27519 24274 7 1 2 402 7.87 26 39118 37435 36109 34766 32131 29134 26111 10 442 10.46 32 44694 43221 42332 41157 38813 36503 33869 31293 26758 15 505 15.60 40 Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings include the effects of a birdscreen. The sound ratings shown are loudness values in hemispherical sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : Free inlet hemispherical sone levels. 7 G, G

G, G 8 Performance for High Pressure G CFM / Static Pressure in inches wg Motor HP Max Fan RPM.5.75 1 1.25 1.5 1.75 2 2.25 2.5 772 702 622 515 313 1/4 2025 0.26 13.3 Max hp Sones @.5 Quick uild est vailable 101HP 875 814 748 674 574 406 1/3 2229 0.35 14.8 1032 982 928 869 807 735 639 497 1/2 2550 0.52 17.4 1009 903 774 592 1/4 1500 0.26 13.1 141HP 1151 1064 959 833 668 1/3 1655 0.35 15.0 1366 1294 1218 1127 1033 901 753 1/2 1900 0.53 19.0 1598 1536 1472 1407 1328 1248 1163 1045 919 3/4 2170 0.79 22 1380 1139 589 1/4 1095 0.26 9.0 1606 1416 1149 1/3 1210 0.35 10.6 161HP 1938 1789 1619 1399 1032 1/2 1390 0.53 13.3 2275 2150 2016 1868 1704 1447 1034 3/4 1580 0.79 16.7 2551 2442 2325 2200 2066 1917 1714 1452 987 1 1740 1.05 20 1759 1/4 845 0.26 9.1 2114 1686 1/3 935 0.35 10.3 2601 2316 1920 1/2 1075 0.53 12.9 180HP 3088 2880 2610 2277 1711 3/4 1225 0.78 16.3 3485 3296 3095 2840 2540 2059 1 1350 1.05 19.5 4076 3909 3744 3576 3353 3119 2827 2407 1 1 2 1540 1.56 25 4560 4414 4263 4114 3964 3764 3560 3340 3037 2 1700 2.11 30 2809 2331 1424 1/2 895 0.53 11.4 3409 3050 2602 1857 3/4 1020 0.78 14.1 200HP 3885 3584 3243 2804 2136 1 1125 1.04 16.9 4569 4343 4070 3770 3416 3000 2278 1 1 2 1285 1.57 21 5114 4919 4692 4442 4169 3856 3492 3004 2250 2 1415 2.07 24 5982 5812 5642 5448 5233 5004 4767 4496 4196 3 1625 3.16 32 3215 2440 1/2 680 0.53 9.4 3973 3424 2643 3/4 775 0.79 12.0 220HP 4532 4083 3536 2648 1 850 1.04 15.0 5400 5060 4660 4185 3602 1 1 2 975 1.57 18.7 6076 5794 5459 5082 4649 4136 3346 2 1075 2.10 23 7100 6858 6611 6316 6009 5649 5263 4812 4265 3 1230 3.15 28 3475 2693 1/2 685 0.53 9.4 4247 3740 2964 3/4 780 0.78 12.7 240HP 4860 4434 3915 3105 1 860 1.05 15.9 5751 5392 5010 4562 3958 1 1 2 980 1.55 22 6474 6154 5826 5468 5062 4555 3763 2 1080 2.08 27 7610 7333 7053 6767 6469 6146 5775 5364 4776 3 1240 3.14 31 3602 1/2 495 0.53 10.3 4662 3600 3/4 565 0.77 11.8 5398 4652 3309 1 620 1.04 13.4 300HP 6542 5954 5269 4221 1 1 2 710 1.55 17.2 7460 6943 6402 5737 4800 2 785 2.10 20 8746 8328 7870 7394 6892 6150 5245 3 895 3.11 25 10688 10351 10006 9621 9233 8831 8429 7903 7255 5 1065 5.24 44 6576 1 435 1.02 10.8 8432 7000 1 1 2 500 1.56 13.4 360HP 9681 8589 6998 2 550 2.06 16.0 11616 10772 9767 8525 6006 3 630 3.11 20 14487 13711 13002 12220 11282 10239 8513 5 750 5.26 27 16918 16236 15568 14946 14315 13544 12676 11761 10368 7 1 2 855 7.82 35 Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings include the effects of a birdscreen. The sound ratings shown are loudness values in hemispherical sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : Free inlet hemispherical sone levels.

efficient air Save energy with Vari-Green motors. The world s best-performing fans just got even more efficient and cost-effective thanks to Greenheck s high-efficiency Vari-Green EC motor that can be specified on Greenheck centrifugal rooftop fans, sidewall fans, utility, and inline exhaust and supply fans. The low maintenance, direct-drive Vari-Green motor can operate at 80% turndown of full speed as compared to 30% turndown for standard industry PSC motors. y achieving a wider range of variable speeds, the Vari-Green motor can perform at lower RPMs saving 20%-70% of the energy costs required by PSC motors and extending bearing life. Greenheck s new Vari-Green motor also can help earn LEED building credits under Prerequisite Two: Minimum Energy Performance and Credit One: Optimize Energy Performance. For better air, specify Greenheck fans. To find out more about our Vari-Green motor, watch a video at greenheck.com/library. Learn more at greenheck.com 715.359.6171 greenheck.com Fans & Ventilators Centrifugal & Vane xial Fans Energy Recovery Ventilators Packaged Ventilation Systems Make-up ir Units Kitchen Ventilation Systems Dampers Louvers Lab Exhaust Systems Coils Scan code to learn more about Greenheck s Vari-Green motor.

CUE, CW, CUE, CW 10 CUE, CUE CW, CW UL/cUL 705 Power Ventilators E40001 - CUE, CW, CUE, CW UL/cUL 762 Power Ventilators for Restaurant Exhaust ppliances - size 099 and up - MH11745 - CUE, CW, CUE, CW UL/cUL Power Ventilators for Smoke Control Systems - MH17511 - CUE UL/cUL Listed 705 is standard on In Stock CW models. UL/cUL Listed 762 is standard on In Stock CUE, CW, CUE models. Greenheck Fan Corporation certifies that the CUE, CW, CUE and CW shown herein are licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and Publication 311 and comply with the requirements of the MC Certified Ratings Program. est vailable Program CUE-099 through 121, 141 through 180 CW-065 through 095, 101, 121 and 141 In Stock CUE-101 through 121, 141 through 200, 240 & 300 High Pressure CUE 141HP, 180HP and 240 HP ll CUE, CW 060 through 200 CUE-099, 131, 220, 360 through 480 ll CW 099 through 300 High Pressure CUE, CW 141HP through 180HP High Pressure CUE 101HP, 161HP, 200HP, 220HP, 300HP and 360HP High Pressure CW 101HP through 300HP Extended Pressure CUE 161XP through 360XP CUE, CW Direct Drive and CUE, CW elt Drive Centrifugal upblast or sidewall fans are designed for clean or contaminated air exhaust applications requiring roof or wall mounting. Standard Construction CUE CW CUE CW Housing fully-welded to curb cap with drain trough Wheel - backward-inclined, aluminum One piece windband - aluminum irdscreen - galvanized Corrosion-resistant fasteners NEM-1 disconnect switch all bearing motor - 1/4 hp and larger Double-studded vibration isolators Mounting plate Three speed motor - sizes 060 through 095 Lifting lugs djustable motor pulley Options and ccessories Stock CUE CW CUE CW Vari-Green motor - 80% turndown, 85% efficient vailable as standard on select sizes Damper - not for use in grease applications Hinged curb cap with cables - NFP required Roof curb - NFP requires vented roof curb Roof curb accessories - seals, adaptors, extensions Grease trap and drain connection - NFP required Speed control Wall grille irdscreen - aluminum Clean-out port - NFP required Windband extension Tie-down points NEM rated disconnect switch Non-stick coating on wheel Heat baffle Dual drives Relubricatable bearings Decorative or protective powder coating Certified for high wind applications Certified for seismic applications UL/cUL Listed Power Ventilators UL/cUL Listed Power Ventilators for Restaurant Exhaust ppliances UL/cUL Listed Power Ventilators for Smoke Control Systems. Excludes 099, 300HP, 161-300XP Select sizes and models with the Vari-Green motor are available in stock. www.greenheck.com Centrifugal Upblast Exhaust Fans www.greenheck.com Sidewall Exhaust Fans For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

CUE, CUE CW, CW C* 1¾ inch Dimensions for CUE, CUE C* Nominal Sq. s Damper^ Roof Curb Roof Opening 060, 065, 070, 075 17 18 3 8 13 1 2 8 17 10 1 2 080, 085, 090 19 21 13 3 8 10 19 12 1 2 095 19 21 15 1 4 10 19 12 1 2 099, 101, 121, 131 19 24 7 8 28 1 4 12 19 14 1 2 141, 161 22 28 7 8 29 3 4 16 22 18 1 2 180, 200 30 35 3 8 28 5 8 18 30 20 1 2 220, 240 34 42 3 4 33 7 8 24 34 26 1 2 300 40 50 36 30 40 32 1 2 360 46 56 11 16 39 1 8 36 46 38 1 2 420 52 65 3 16 44 3 4 42 52 44 1 2 480 58 74 3 16 48 1 8 48 58 50 1 2 Dimensions for CW, CW C* Nominal Sq. s Damper^ Wall Opening CUE, CW, CUE, CW C* 060, 065, 070, 075 14 3 4 18 3 8 13 1 2 8 8 1 2 080, 085, 090 17 7 8 21 13 3 8 10 10 1 2 095 17 7 8 21 15 1 4 10 10 1 2 099, 101, 121, 131 19 3 4 24 7 8 28 1 4 12 12 1 2 141, 161 22 1 8 28 7 8 29 3 4 15 15 1 2 180, 200 27 3 4 35 3 8 28 5 8 17 17 1 2 220, 240 31 1 4 42 25 32 33 7 8 20 20 1 2 300 38 3 8 50 36 25 25 1 2 ll dimensions are in inches. Dimension given is the inside dimension of the curb cap. *May be greater depending on motor. ^Dampers should not be used in grease applications. 11 Performance for CUE, CW 060 065 070 075 080 085 090 095 Quick CFM / Static Pressure in inches wg Max In Stock Motor Max Sones uild Fan HP hp @.25 est 0.125.25.375.5.625.75.875 1 RPM Direct Drive vailable 133 81 1/200 1050 0.01 1.7* 165 126 70 1/100 1300 0.01 2.5 197 164 128 1/60 1550 0.02 4.0 219 188 159 118 1/6 1725 0.029 5.3 180 109 1/100 1050 0.01 2.2* 223 170 97 1/60 1300 0.02 2.9 CW-065-DGEX-QD 266 222 172 95 1/30 1550 0.03 4.1 296 257 215 160 1/6 1725 0.039 5.0 250 171 1/100 1050 0.01 2.6* 309 255 152 1/60 1300 0.02 2.5 CW-070-DGEX-QD 369 325 269 160 1/30 1550 0.03 4.7 411 371 326 258 1/6 1725 0.036 6.4 287 188 1/80 1050 0.01 3.4* 356 279 185 1/50 1300 0.02 3.4 CW-075-DGEX-QD 424 359 291 204 1/25 1550 0.04 4.9 472 413 355 289 1/6 1725 0.055 6.1 325 247 133 1/40 1050 0.02 4.2 403 343 272 173 1/30 1300 0.03 5.5 CW-080-DGEX-QD 480 431 376 314 235 1/20 1550 0.05 7.2 534 491 444 390 333 257 1/6 1725 0.07 8.6 389 305 182 1/40 1050 0.02 4.3 481 416 340 235 1/30 1300 0.04 5.3 CW-085-DGEX-QD 574 520 461 395 312 161 1/20 1550 0.06 7.4 639 591 540 484 421 344 224 1/6 1725 0.08 8.6 549 451 306 1/40 1050 0.03 4.2 680 600 517 391 1/25 1300 0.05 5.5 CW-090-DGEX-QD 811 744 677 604 501 347 1/15 1550 0.09 7.5 903 842 782 722 652 553 420 1/6 1725 0.12 8.8 711 570 381 1/30 1050 0.04 4.5 880 774 641 484 199 1/12 1300 0.07 6.4 CW-095-DGEX-QD 1049 964 861 747 616 442 1/8 1550 0.12 8.5 1167 1093 1005 905 802 680 525 279 1/6 1725 0.17 10.5 *Sones displayed are at greatest wg shown with cfm CUE, CW: Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : Free inlet hemispherical sone levels.

CUE, CW, CUE, CW 12 Performance for CUE, CW, CUE, CW 099 101 121 131 141 161 180 200 Quick CFM / Static Pressure in inches wg Max In Stock Motor Max Sones uild Fan HP HP @.25 est 0.25.375.5.625.75 1 1.25 1.5 RPM elt Drive Direct Drive vailable 628 376 1/8 860 0.03 4.3 833 665 565 408 1/6 1140 0.07 6.3 1260 1156 1100 1041 981 918 759 1/4 1725 0.25 13.4 CUE-099-VG4G-QD 732 481 1/8 860 0.04 1.3 970 806 707 1/6 1140 0.09 6.5 1413 1313 1251 1189 1125 1056 861 1/4 1660 0.26 12.0 CUE-101-4G-QD CUE-101-VG4G-QD 1468 1373 1315 1255 1195 1129 970 1/4 1725 0.29 12.5 CW-101-VG4G-QD 1549 1459 1406 1350 1293 1234 1106 900 1/3 1820 0.35 13.4 1015 781 581 1/8 860 0.06 5.6 1346 1180 1091 981 833 1/6 1140 0.14 8.2 1665 1528 1463 1398 1315 1224 965 1/4 1410 0.26 12.2 CUE-121-LMDG-QD 1824 1699 1639 1580 1518 1441 1262 990 1/3 1545 0.34 14.0 2037 1923 1869 1816 1763 1710 1571 1406 1176 1/2 1725 0.48 16.7 CUE-121-VG5G-QD CW-121-VG5G-QD 1180 914 675 1/8 860 0.07 7.7 1564 1379 1280 1144 964 1/6 1140 0.17 11.8 1790 1629 1547 1458 1340 1201 1/4 1305 0.26 13.9 1968 1822 1749 1671 1586 1479 1198 1/3 1435 0.35 15.1 2258 2130 2066 2002 1935 1865 1686 1458 1/2 1646 0.52 17.4 2366 2244 2183 2122 2061 1994 1838 1646 1365 3/4 1725 0.60 18.4 1558 1264 1034 1/8 860 0.12 7.1 2001 1793 1667 1515 1318 998 1/4 1105 0.26 10.6 2192 2006 1896 1773 1628 1443 1/3 1210 0.34 11.7 2518 2362 2271 2174 2068 1949 1643 1/2 1390 0.52 14.2 CUE-141-5G-QD 2808 2671 2594 2509 2422 2329 2110 1823 1349 3/4 1550 0.72 17.5 CUE-141-VG7G-QD CW-141-VG7G-QD 3124 3005 2936 2865 2789 2711 2539 2339 2085 1 1725 1.00 22 CUE-141-LMDG-QD 2472 2126 1918 1680 1/4 860 0.25 9.9 2774 2477 2300 2109 1893 1584 1/3 965 0.35 11.5 3191 2941 2796 2641 2475 2297 1770 1/2 1110 0.54 14.2 CUE-161-LMDG-QD 3277 3035 2896 2745 2587 2421 1983 3/4 1140 0.58 14.8 CUE-161-VG7G-QD 3996 3806 3698 3584 3464 3340 3078 2785 2394 1 1390 1.05 20 4959 4806 4729 4646 4554 4463 4269 4070 3855 2 1725 2.01 29 2815 2448 2143 1763 1/4 745 0.26 8.1 3098 2759 2525 2257 1867 1/3 820 0.34 10.0 3249 2922 2732 2474 2171 1/2 860 0.40 11.1 3306 2982 2809 2551 2265 1827 3/4 875 0.42 11.8 CUE-180-VG7G-QD 3551 3243 3115 2879 2654 2363 1/2 940 0.52 13.1 CUE-180-LMDG-QD 4061 3786 3666 3554 3345 3141 2652 3/4 1075 0.78 15.8 4307 4045 3927 3822 3679 3470 3072 2477 1 1140 0.93 16.5 5138 4913 4811 4710 4620 4532 4232 3912 3537 1 1 2 1360 1.58 22 5648 5443 5345 5254 5163 5082 4921 4598 4313 2 1495 2.10 27 3403 2675 2144 1/4 605 0.26 6.8 3740 3096 2699 2073 1/3 665 0.35 8.3 4275 3718 3413 3048 2518 1/2 760 0.52 11.1 4837 4346 4093 3815 3498 3084 3/4 860 0.75 14.9 CUE-200-LMDG-QD 5400 4958 4742 4508 4254 3985 3169 1 960 1.04 13 6187 5798 5610 5421 5217 5006 4529 3861 1 1 2 1100 1.57 23 6412 6036 5855 5674 5479 5283 4837 4276 3445 2 1140 1.74 24 CUE, CW: Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : Free inlet hemispherical sone levels. CUE, CW: Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : Free inlet hemispherical sone levels

Performance for CUE, CW Quick CFM / Static Pressure in inches wg Max In Stock Motor Max Sones uild Fan HP hp @.25 est 0.25.375.5.625.75 1 1.25 1.5 RPM elt Drive vailable 3784 2896 2268 1/4 475 0.26 6.7 4142 3357 2845 1/3 520 0.34 7.7 4779 4124 3736 3279 1/2 600 0.52 10.2 220 5457 4893 4581 4234 3836 3383 3/4 685 0.78 13.7 6014 5502 5239 4944 4620 4258 1 755 1.04 16.6 6890 6443 6220 5987 5729 5453 4835 4111 1 1 2 865 1.57 19.6 7607 7202 7000 6799 6580 6347 5844 5261 4602 2 955 2.11 24 4216 3188 2162 1/4 465 0.26 6.3 4623 3717 3134 1/3 510 0.34 7.3 5303 4540 4093 3565 1/2 585 0.52 9.5 240 6074 5461 5052 4659 4202 3524 3/4 670 0.79 12.8 CUE-240-LMDG-QD 6663 6133 5764 5409 5037 4618 1 735 1.04 15.5 7660 7184 6947 6615 6304 6002 5282 1 1 2 845 1.57 18.6 8431 7985 7798 7536 7233 6953 6375 5706 4324 2 930 2.10 23 5940 4464 1/3 365 0.34 5.7 6835 5660 4820 1/2 420 0.52 7.5 7811 6844 6231 5440 3/4 480 0.77 9.9 300 8625 7772 7245 6636 5879 1 530 1.05 12.2 9845 9127 8705 8226 7708 7084 1 1 2 605 1.55 15.7 CUE-300-LMDG-QD 10822 10193 9808 9411 8968 8495 7271 2 665 2.07 18.6 12449 11904 11607 11273 10939 10554 9743 8756 7352 3 765 3.15 23 14727 14266 14036 13788 13505 13223 12614 11963 11191 5 905 5.21 32 8631 6755 5256 1/2 320 0.52 6.0 9845 8299 7286 5767 3/4 365 0.78 8.5 360 10789 9426 8556 7575 1 400 1.02 11.1 12408 11281 10587 9814 8979 7809 1 1 2 460 1.55 15.8 CUE only 13621 12602 12022 11359 10647 9878 2 505 2.06 19.8 15644 14769 14306 13783 13218 12597 11287 9381 3 580 3.13 23 18611 17884 17504 17115 16711 16236 15243 14187 12985 5 690 5.26 28 10416 7304 1/2 245 0.53 6.1 11904 9418 7419 3/4 280 0.78 7.1 12966 10781 9272 1 305 1.02 8.0 420 14879 13050 11925 10562 8273 1 1 2 350 1.54 10.1 16367 14731 13791 12701 11391 9246 2 385 2.05 12.4 CUE only 18706 17316 16532 15691 14740 13652 10151 3 440 3.07 16.0 22319 21220 20560 19904 19218 18497 16795 14802 5 525 5.20 22 25508 24604 24027 23451 22876 22295 21023 19561 17884 7 1 2 600 7.77 29 12240 7688 1/2 200 0.53 5.3 13770 10132 3/4 225 0.76 6.6 15300 12248 9988 1 250 1.04 8.2 480 17442 14991 13240 11154 1 1 2 285 1.55 10.0 19278 17116 15719 14033 11996 2 315 2.09 11.8 CUE only 22032 20222 19142 17848 16410 14749 3 360 3.12 16.1 26010 24521 23679 22764 21766 20556 17922 5 425 5.12 21 29988 28697 28051 27291 26497 25704 23674 21437 18846 7 1 2 490 7.85 27 CUE, CW: Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : Free inlet hemispherical sone levels. 13 CUE, CW, CUE, CW

CUE, CW, CUE, CW 14 Performance for High Pressure CUE, CW, CUE, CW Quick CFM / Static Pressure in inches wg Max In Stock Motor Max Sones uild Fan HP hp @.5 est.5.75 1 1.25 1.5 1.75 2 2.25 2.5 RPM elt Drive vailable 761 693 615 522 346 1/4 2045 0.26 13.9 101HP 860 804 737 665 579 456 1/3 2250 0.35 14.4 1014 969 919 861 799 735 655 550 323 1/2 2580 0.53 16.8 1016 920 798 642 1/4 1465 0.26 14.2 141HP 1146 1063 965 846 704 1/3 1605 0.34 15.3 1363 1292 1219 1137 1042 924 800 1/2 1845 0.52 17.1 CUE-141HP-LMDG-QD 1592 1536 1473 1409 1341 1262 1178 1073 965 3/4 2110 0.78 19.9 1487 1252 1/4 1065 0.26 11.1 1697 1504 1252 1/3 1165 0.34 12.9 161HP 2053 1897 1724 1513 1/2 1340 0.52 14.2 2433 2301 2165 2015 1855 1638 3/4 1535 0.79 18.1 2722 2611 2488 2365 2228 2082 1899 1664 1 1690 1.05 21 1799 1/4 845 0.26 9.6 2104 1688 1/3 925 0.35 10.8 2581 2323 1933 1/2 1065 0.53 14.1 180HP 3063 2868 2626 2286 1854 3/4 1215 0.79 15.4 CUE-180HP-LMDG-QD 3441 3261 3075 2839 2523 2156 1 1335 1.04 19.0 4035 3884 3728 3574 3376 3135 2859 2534 1 1 2 1530 1.57 24 4495 4369 4226 4085 3945 3768 3575 3325 3061 2 1685 2.09 28 2779 2317 1/2 880 0.52 10.7 3397 3067 2637 3/4 1010 0.79 14.7 200HP 3851 3561 3242 2806 1 1110 1.04 17.1 4558 4312 4055 3789 3433 2944 1 1 2 1270 1.56 22 5110 4898 4674 4436 4195 3880 3515 2 1400 2.09 25 5943 5775 5581 5385 5182 4971 4760 4476 4189 3 1600 3.13 29 3151 2405 1/2 680 0.51 9.7 3902 3427 2716 3/4 780 0.78 13.4 220HP 4459 4075 3578 2863 1 860 1.05 15.0 5281 4988 4642 4220 3674 2825 1 1 2 985 1.57 19.1 5920 5678 5390 5061 4679 4210 3573 2 1085 2.09 23 6895 6684 6469 6217 5950 5637 5283 4885 4374 3 1240 3.13 27 3405 2607 1/2 675 0.52 9.4 4233 3704 2940 3/4 775 0.78 13.1 240HP 4812 4367 3846 3025 1 850 1.04 14.5 5737 5387 4988 4539 4006 1 1 2 975 1.56 18.4 CUE-240HP-LMDG-QD 6404 6112 5775 5407 4990 4550 3625 2 1070 2.08 22 7513 7280 7016 6730 6410 6090 5709 5326 4722 3 1230 3.16 26 3639 1/2 485 0.52 7.9 4788 3651 3/4 555 0.77 10.4 5549 4731 1 610 1.03 12.4 300HP 6741 6149 5390 1 1 2 700 1.57 16.0 7613 7107 6535 5814 4684 2 770 2.09 18.6 9014 8603 8150 7678 7062 6353 3 885 3.15 23 10909 10570 10222 9855 9455 9054 8533 8002 7330 5 1045 5.21 35 7003 1 440 1.03 10.8 8765 7539 1 1 2 505 1.57 15.3 360HP 10029 9046 7766 2 555 2.08 17.2 11934 11157 10276 9171 7329 3 635 3.12 21 14688 14086 13434 12734 11922 10973 9593 5 755 5.24 28 17129 16631 16105 15544 14933 14315 13565 12738 11789 7 1 2 865 7.89 33 CUE, CW: Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : Free inlet hemispherical sone levels. CUE, CW: Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : Free inlet hemispherical sone levels.

Performance for Extended Pressure CUE 161XP 240XP 300XP CFM / Static Pressure in inches wg 1 1.25 1.5 1.75 2 2.5 3 3.5 4 Motor HP Max Fan RPM Max hp Sones @ 1 1322 1116 726 1/2 1750 0.52 12.1 1684 1552 1392 1161 777 3/4 2005 0.78 15.0 1946 1834 1713 1578 1395 634 1 2205 1.04 17.5 2339 2250 2155 2056 1946 1676 1221 1 1 2 2525 1.56 22 1613 1321 792 1/2 1195 0.53 11.6 2079 1886 1645 1350 3/4 1365 0.78 13.6 2424 2256 2079 1865 1630 1 1500 1.04 15.9 2939 2815 2671 2523 2366 1975 1336 1 1 2 1720 1.57 21 3333 3222 3109 2980 2847 2566 2202 1706 2 1895 2.10 24 3927 3830 3733 3634 3535 3305 3063 2787 2461 3 2165 3.12 29 2958 2273 3/4 900 0.79 12.2 3619 3167 2538 1 990 1.05 14.6 4511 4201 3833 3384 2773 1 1 2 1130 1.56 18.9 5182 4930 4648 4321 3943 2705 2 1245 2.08 22 6199 5983 5768 5532 5286 4695 3886 3 1425 3.14 27 7643 7464 7284 7102 6920 6528 6091 5587 4951 5 1690 5.24 36 4020 3225 1 760 1.05 11.1 Quick uild est vailable 5243 4740 4112 3208 1 1 2 870 1.57 13.6 360XP 6081 5679 5216 4657 3949 2 955 2.08 15.4 7351 7050 6724 6354 5930 4905 3 1095 3.13 19.2 9113 8881 8635 8382 8125 7502 6764 5867 4286 5 1300 5.24 26 10699 10496 10294 10091 9871 9429 8907 8340 7673 7 1 2 1490 7.90 33 CUE: Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : Free inlet hemispherical sone levels. 15 CUE, CW, CUE, CW

USGF USGF elt Drive Severe duty centrifugal upblast fans are designed for exhausting highly contaminated air in roof mounted applications. Standard Construction Housing - heavy-gauge steel Housing fully welded to curb cap with drain trough Wheel - backward-inclined, heavy-gauge steel Non-stick coating on wheel One piece windband - steel Corrosion-resistant fasteners 16 UL/cUL 762 Power Ventilators for Restaurant Exhaust ppliances - MH11745 - USGF, USGF-HP UL/cUL Power Ventilators for Smoke Control Systems - MH17511- USGF, USGF-HP UL/cUL Listed 762 is standard on USGF, USGF-HP models. Greenheck Fan Corporation certifies that the USGF shown herein is licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and Publication 311 and comply with the requirements of the MC Certified Ratings Program. NEM-3R disconnect switch - NFP required ssembled hinged base - NFP required Clean-out port - NFP required all bearing motor - 1/4 hp and larger Dual drives Relubricatable bearings Heat baffle Double-studded vibration isolators Lifting lugs djustable motor pulley Permatector protective powder coating Options and ccessories Damper - not for use in kitchen applications Stock est vailable Program Roof curb - NFP requires vented roof curb Roof curb accessories - seals, adaptors, extensions Grease trap and drain connection - NFP required Windband extension Tie-down points NEM rated disconnect switch Decorative or protective powder coating Certified for high wind and seismic applications UL/cUL Listed Power Ventilators for Smoke Control Systems Dimensions for USGF C* C* Nominal Sq. s Roof Curb Roof Opening 1¾ inch 140, 160 26 28 7 8 29 3 4 26 18 1 2 180, 200 30 35 3 8 28 5 8 30 20 1 2 ll dimensions are in inches. Dimension given is the inside dimension of the curb cap. *May be greater depending on motor. www.greenheck.com Centrifugal Upblast Exhaust Fans For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

Performance for USGF 140 160 180 CFM / Static Pressure in inches wg Max Motor Max Sones Quick uild Fan 0.25.375.5.625.75 1 1.25 1.5 HP hp @.25 RPM est vailable 2001 1793 1667 1515 1318 998 1/4 1105 0.26 10.6 2192 2006 1896 1773 1628 1443 1/3 1210 0.34 11.7 2518 2362 2271 2174 2068 1949 1643 1/2 1390 0.52 14.2 2889 2757 2683 2602 2518 2430 2225 1968 1568 3/4 1595 0.79 18.5 3125 3005 2936 2865 2789 2711 2539 2339 2085 1 1725 1.00 22 2515 2177 1974 1744 1365 1/4 875 0.26 10.1 2774 2477 2300 2109 1893 1584 1/3 965 0.35 11.5 3191 2941 2796 2641 2475 2297 1770 1/2 1110 0.54 14.2 3636 3426 3301 3172 3036 2894 2583 2163 3/4 1265 0.79 17.7 3996 3806 3698 3584 3464 3340 3078 2785 2394 1 1390 1.05 21 2815 2448 2143 1763 1/4 745 0.26 8.1 3098 2759 2525 2257 1867 1/3 820 0.34 10.0 3551 3243 3115 2879 2654 2363 1/2 940 0.52 13.1 4061 3786 3666 3554 3345 3141 2652 3/4 1075 0.78 15.8 4477 4224 4108 4005 3904 3703 3336 2841 1 1185 1.04 17.1 5138 4913 4811 4710 4620 4532 4232 3912 3537 1 1 2 1360 1.58 22 5648 5443 5345 5254 5163 5082 4921 4598 4313 2 1495 2.10 27 3403 2675 2144 1/4 605 0.26 6.7 3740 3096 2699 2073 1/3 665 0.35 8.1 4275 3718 3413 3048 2518 1/2 760 0.52 10.9 200 4922 4439 4192 3922 3626 3240 3/4 875 0.79 15.2 5400 4958 4742 4508 4254 3985 3169 1 960 1.04 17.7 6187 5798 5610 5421 5217 5006 4529 3861 1 1 2 1100 1.57 23 6806 6451 6279 6108 5933 5748 5350 4892 4289 2 1210 2.09 23 Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : Free inlet hemispherical sone levels. 17 USGF Performance for High Pressure USGF 140HP 160HP 180HP CFM / Static Pressure in inches wg Max Motor Max Sones Quick uild Fan.5.75 1 1.25 1.5 1.75 2 2.25 2.5 HP hp @.5 RPM est vailable 1016 920 798 642 1/4 1465 0.26 14.2 1146 1063 965 846 704 1/3 1605 0.34 15.2 1363 1292 1219 1137 1042 924 800 1/2 1845 0.52 17.0 1592 1536 1473 1409 1341 1262 1178 1073 965 3/4 2110 0.78 19.8 1487 1252 1/4 1065 0.26 11.0 1697 1504 1252 1/3 1165 0.34 12.8 2053 1897 1724 1513 1/2 1340 0.52 14.4 2433 2301 2165 2015 1855 1638 3/4 1535 0.79 18.1 2722 2611 2488 2365 2228 2082 1899 1664 1 1690 1.05 21 1799 1/4 845 0.26 9.5 2104 1688 1/3 925 0.35 10.8 2581 2323 1933 1/2 1065 0.53 13.8 3063 2868 2626 2286 1854 3/4 1215 0.79 15.0 3441 3261 3075 2839 2523 2156 1 1335 1.04 18.7 4005 3853 3696 3538 3338 3089 2807 2479 1 1 2 1530 1.54 23 4495 4369 4226 4085 3945 3768 3575 3325 3016 2 1685 2.09 27 2779 2317 1/2 880 0.52 10.5 3397 3067 2637 3/4 1010 0.79 14.5 200HP 3851 3561 3242 2806 1 1110 1.04 16.9 4558 4312 4055 3789 3433 2944 1 1 2 1270 1.56 22 5110 4898 4674 4436 4195 3880 3515 2 1400 2.09 24 5943 5775 5581 5385 5182 4971 4760 4476 4189 3 1600 3.13 29 Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : Free inlet hemispherical sone levels.

LD, LDP, L, LP 18 LDP, LP est vailable Program LD, L UL/cUL 705 Power Ventilators E40001 - LD, LDP, L and LP Greenheck Fan Corporation certifies that the LD, LDP, L and LP shown herein are licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and Publication 311 and comply with the requirements of the MC Certified Ratings Program. LD, LDP Direct Drive and L, LP elt Drive Centrifugal downblast fans are designed for clean air exhaust applications requiring roof mounting. Standard Construction LD LDP L LP Housings with hinged hoods - Fabra hood style, galvanized Housings with hinged hoods - Louvered penthouse, extruded aluminum Wheel - backward-inclined, aluminum irdscreen - galvanized Corrosion-resistant fasteners NEM-1 disconnect switch all bearing motor - 1/4 hp and larger Double-studded vibration isolators Three speed motor - sizes 60 through 95 djustable motor pulley Options and ccessories Stock LD LDP L LP Vari-Green motor - 80% turndown, 85% efficient vailable as standard on select sizes Damper Roof curb Roof curb accessories - seals, adaptors, extensions irdscreen - aluminum Fabra hood - aluminum Tie-down points NEM rated disconnect switch Dual drives Relubricatable bearings Decorative or protective powder coating Certified for high wind UL/cUL Listed Power Ventilators Select sizes and models with the Vari-Green motor are available in stock. LD, L LDP, LP Dimensions for LD, LDP, L, LP Sq. Fabra Hood Style LD, LP Louver Style LDP, LP C D E C D Nominal Sq. s Damper Roof Opening D D 60, 65, 70, 75 17 22 27 13 2 23 23 13 1 2 8 10 1 2 80, 85, 90, 95 19 28 27 16 4 25 25 16 1 2 10 12 1 2 100, 120 22 30 27 18 4 28 28 18 1 2 12 14 1 2 E 1¾ in. 10 22 28 39 17 3 1 4 28 38 1 2 17 12 14 1 2 14 26 35 39 18 4 32 40 17 16 18 1 2 Side view C 18 30 40 39 21 4 1 2 36 46 24 1 2 18 20 1 2 21 30 43 51 23 6 36 46 24 1 2 18 20 1 2 24 34 45 1 2 51 23 1 2 6 3 4 40 49 1 2 23 1 2 24 26 1 2 30 40 50 63 26 5 8 8 1 2 46 58 26 1 2 30 32 1 2 36 46 60 63 32 5 8 9 3 4 51 3 4 63 34 3 8 36 38 1 2 42 52 70 5 8 75 37 3 8 11 1 2 58 70 1 2 38 1 4 42 44 1 2 48 58 70 3 8 87 41 1 2 11 5 8 64 76 1 2 40 3 8 48 50 1 2 54 64 79 1 2 87 45 3 8 12 1 2 70 83 1 2 43 5 8 54 56 1 2 ll dimensions are in inches. Dimension given is the inside dimension of the curb cap. www.greenheck.com Centrifugal Roof Exhaust Fans For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

Performance for LD, LDP CFM / Static Pressure in inches wg 0.125.25.375.5.625.75.875 Motor HP Max Fan RPM Motor Watts Max hp Sones @.25 Quick uild est vailable 60 202 164 119 1/60 1590^ 51 W 3.8 65 274 238 187 129 1/30 1680^ 70 W 5.1 70 360 314 257 188 1/30 1665^ 73 W 5.4 75 400 351 290 222 122 1/25 1620^ 79 W 4.7 80 481 413 342 258 165 1/20 1550^ 115 W 7.6 85 576 490 403 291 182 1/20 1500^ 120 W 7.3 90 819 714 608 485 361 1/15 1550^ 92 W 8.3 95 1052 942 825 695 552 396 1/8 1550^ 160 W 10.4 766 568 1/8 860.029 5.3* 100 1016 879 709 493 1/6 1140.068 10.4 1538 1457 1360 1256 1142 1024 891 724 1/4 1725.240 14.2 921 702 1/8 860.043 5.3* 120 1221 1072 886 664 1/6 1140.099 10.0 1848 1762 1652 1540 1412 1286 1142 979 1/4 1725.350 19.3 ^s run data. *Sones displayed are at greatest wg shown with cfm. Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings include the effects of a birdscreen. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : Free inlet hemispherical sone levels. 19 LD, LDP, L, LP

LD, LDP, L, LP 20 Performance for L, LP 10 14 18 21 24 30 36 42 48 CFM / Static Pressure in inches wg 0.25.375.5.625.75 1 1.25 1.5 Motor HP Max Fan RPM Max hp 1446 1331 1280 1220 1142 1064 1/4 1611 0.28 10.7 1587 1480 1432 1385 1327 1254 1112 1/3 1767 0.36 12.6 2004 1807 1681 1534 1351 1/4 1066 0.28 9.4 Sones @.25 2200 2019 1920 1797 1657 1487 1/3 1170 0.36 11.1 2525 2372 2289 2199 2092 1979 1692 1/2 1343 0.55 13.8 2847 2474 2214 1925 1/4 755 0.28 7.4 3115 2778 2563 2324 2047 1/3 826 0.36 8.9 3578 3292 3136 2936 2729 2498 1/2 949 0.55 12.0 4091 3847 3711 3575 3398 3218 2822 3/4 1085 0.82 15.5 4302 4073 3943 3814 3664 3493 3140 2674 1 1141 0.96 16.7 5185 4997 4898 4790 4683 4576 4311 4025 3719 1 1 2 1375 1.67 22 5505 5328 5239 5138 5037 4936 4714 4446 4176 2 1460 2.00 24 3609 2938 2457 1/4 595 0.28 7.8 3948 3371 2970 2354 1/3 651 0.36 8.8 4531 4056 3741 3390 2909 1/2 747 0.55 11.2 5186 4790 4553 4261 3954 3608 3/4 855 0.82 14.4 5452 5087 4858 4602 4313 4019 2894 1 899 0.96 15.4 6532 6260 6068 5877 5691 5451 4965 4395 1 1 2 1077 1.65 21 7278 7034 6890 6712 6542 6375 5954 5517 5013 2 1200 2.28 25 4449 3451 2491 1/4 462 0.28 6.3 4892 4043 3433 1/3 508 0.36 7.4 5604 4917 4441 3899 1/2 582 0.55 9.4 6423 5828 5505 5062 4589 3984 3/4 667 0.83 12.7 7068 6531 6252 5912 5503 5073 1 734 1.10 15.3 7578 7080 6820 6560 6190 5799 4909 1 1 2 787 1.36 17.4 8763 8333 8114 7889 7664 7377 6713 5995 2 910 2.10 24 6221 4729 1/3 366 0.37 5.9 7156 5939 5076 1/2 421 0.55 7.4 8210 7196 6567 5777 3/4 483 0.83 10.7 8992 8079 7559 6946 6162 1 529 1.10 12.9 10284 9507 9073 8605 8068 7434 1 1 2 605 1.64 15.7 11338 10639 10257 9863 9419 8933 7737 2 667 2.19 18.6 11950 11287 10935 10562 10184 9722 8701 7032 3 703 2.57 20 14194 13635 13356 13062 12747 12432 11728 10951 9965 5 835 4.33 26 8884 6937 1/2 315 0.55 6.3 10153 8570 7487 3/4 360 0.83 8.9 11196 9816 8911 7775 1 397 1.10 12.1 12804 11668 10949 10127 9209 7552 1 1 2 454 1.66 15.4 14073 13064 12442 11760 11004 10173 2 499 2.20 17.6 16132 15287 14790 14229 13649 12989 11534 3 572 3.32 22 19121 18419 18041 17621 17165 16683 15636 14494 12970 5 678 5.52 29 10827 7772 1/2 247 0.55 5.5 12405 9965 7932 3/4 283 0.83 7.1 13632 11521 10057 1 311 1.10 8.7 15605 13887 12733 11417 9401 1 1 2 356 1.66 12.1 17183 15667 14715 13626 12382 10481 2 392 2.21 14.9 19637 18378 17605 16740 15786 14735 3 448 3.30 20 22574 21500 20887 20214 19480 18651 16871 14331 5 515 5.01 24 12824 7629 1/2 199 0.56 7.0 14563 10741 3/4 226 0.83 7.5 16046 12787 10092 1 249 1.10 9.2 18365 15612 13896 11357 1 1 2 285 1.66 11.1 20234 17779 16397 14665 11934 2 314 2.22 13.4 23134 21041 19878 18650 17134 15069 3 359 3.31 17.2 27065 25383 24354 23363 22317 21159 18029 5 420 5.31 23 19267 13895 1 206 1.12 8.7 Quick uild est vailable 21980 17983 14194 1 1 2 235 1.66 11.3 54 24131 20831 17904 2 258 2.21 13.0 27685 25030 23122 20394 16072 3 296 3.34 15.2 32736 30514 29312 27766 25487 22974 5 350 5.50 20 37506 35583 34583 33500 32150 30332 26018 7 1 2 401 8.29 26 Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings include the effects of a birdscreen. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : Free inlet hemispherical sone levels.

UL/cUL 705 Power Ventilators E40001 - E, S UL/cUL Listed 705 is standard on E, S models. est vailable Program D Greenheck Fan Corporation certifies that the E and S shown herein are licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and Publication 311 and comply with the requirements of the MC Certified Ratings Program. Dimensions for E, S C D C 1¾ in. Nominal Sq. s Recommended Roof Opening 10 19 24 5 8 15 1 2 5 1 2 14 1 2 12 22 28 5 8 16 1 2 6 1 4 14 1 2 14 22 28 5 8 16 1 2 6 1 4 16 1 2 16 26 35 1 4 17 1 4 6 1 4 18 1 2 18 30 35 1 4 17 1 4 6 1 4 20 1 2 20 24 34 42 17 1 2 6 1 4 26 1 2 ll dimensions are in inches. E and S Direct Drive xial downblast fans are designed for clean air exhaust or supply applications requiring roof mounting. The propeller provides efficient airflow at low static pressures. Standard Construction Housing - aluminum Propeller - aluminum irdscreen - galvanized Corrosion-resistant fasteners NEM-1 disconnect switch all bearing motor - 1/4 hp and larger Options and ccessories Damper Roof curb Roof curb accessories - adaptors, extensions Speed control irdscreen - aluminum NEM rated disconnect switch Decorative or protective powder coating Performance for E CFM / Static Pressure in inches wg Max Motor Max Sones Fan 0.1.125.25.375.5.75 1 HP hp @ 0 RPM 10 550 475 465 347 255 189 1/8 1750 0.05 9.6 12 1014 853 803 376 144 1/6 1140 0.06 5.1 1556 1460 1437 1291 1055 672 386 1/4 1750 0.18 9.0 14 1601 1381 1311 925 626 273 1/6 1140 0.12 8.2 2457 2332 2298 2093 1875 1603 1244 716 1/2 1750 0.41 16.8 16 1999 1817 1764 1418 904 682 1/6 1140 0.14 10.5 3068 2958 2928 2771 2590 2339 1686 1257 1/2 1750 0.48 17.9 18 2982 2713 2645 2264 1669 1276 499 1/3 1140 0.35 11.7 4578 4395 4349 4141 3908 3660 2935 2327 1 1750 1.05 28 20 3871 3606 3531 3100 2301 1925 1/2 1140 0.38 11.3 5943 5785 5745 5507 5260 5007 4246 3295 1 1 2 1750 1.17 23 24 5091 4782 4703 4277 3813 3279 2252 1/2 1140 0.63 17.2 6042 5714 5626 5137 4619 4146 3136 2028 1 1140 1.17 19.8 Performance certified is for installation type : Free inlet, Free outlet. Performance ratings include the effects of a birdscreen. The sound ratings shown are loudness values in fan sones at a distance of 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : Free inlet hemispherical sone levels. Performance for S Stock CFM / Static Pressure in inches wg Max Motor Max Sones Fan 0.1.125.25.375.5.75 1 HP hp @ 0 RPM 10 503 413 401 343 280 188 1/8 1750 0.05 7.9 12 929 835 813 595 415 1/4 1750 0.07 9.6 1444 1412 1400 1203 953 641 1/4 1750 0.15 11.4 14 2041 1940 1912 1742 1567 1380 1018 1/4 1750 0.25 16.1 2586 2442 2395 2176 1971 1799 1380 1/2 1750 0.46 20 16 2353 2229 2195 2008 1819 1597 1121 1/2 1750 0.29 20 2920 2826 2802 2602 2376 2188 1693 1200 3/4 1750 0.52 21 18 3906 3739 3690 3454 3228 2990 2454 3/4 1750 0.76 30 4247 4110 4076 3846 3526 3259 2724 1 1750 0.97 31 20 3488 3202 3125 2715 2315 1847 1/2 1140 0.34 16.7 5355 5181 5137 4886 4648 4408 3830 3272 1 1 2 1750 1.14 29 24 4569 4289 4215 3841 3392 2958 1/2 1140 0.50 24 5742 5401 5315 4929 4556 4131 3066 1 1140 1.09 29 Performance certified is for installation type : Free inlet, Free outlet. Performance ratings include the effects of a birdscreen. The sound ratings shown are loudness values in fan sones at a distance of 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : Free inlet hemispherical sone levels. 21 E, S For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative. www.greenheck.com Hooded Propeller Exhaust and Supply Fans

RDU, RU, RUMO 22 est vailable Program RU 5 Days 1¾ in. C F RUMO 2¼ in. D** UL/cUL 705 Power Ventilators E40001 - RU, RUMO and RDU UL/cUL Power Ventilators for Smoke Control Systems - MH17511 - RUMO Greenheck Fan Corporation certifies that the RDU, RU and RUMO shown herein are licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and Publication 311 and comply with the requirements of the MC Certified Ratings Program. E C D* RDU Direct Drive and RU, RUMO elt Drive xial upblast fans are designed to discharge high volumes of clean or contaminated air up and away from the building. Standard Construction RU RUMO RDU Housing - galvanized steel with fully-assembled butterfly dampers and damper stops Curb cap and drive assembly sizes 18 through 48 - galvanized steel sizes 54 and 60 - painted steel Propeller - aluminum Propeller - fabricated steel Corrosion-resistant fasteners all bearing motor - 1/4 hp and larger Relubricatable bearings djustable motor pulley Options and ccessories Stock RU RUMO RDU Roof curb Roof curb accessories - seals, adaptors, extensions Guards - inlet, outlet Propeller - aluminum utterfly dampers - aluminum Magnetic damper latches Motorized damper lifters Fusible link damper lifters Tie-down points NEM rated disconnect switch Lube lines Dual drives elt tube Decorative or protective powder coating Certified for seismic applications High temperature option UL/cUL Listed Power Ventilators UL/cUL Listed Power Ventilators for Smoke Control Systems RU Dimensions Nominal Sq. s D* Recommended C E F Curb Cap ID 1, 2 3 Roof Opening 20 30 27 1 4 24 15 23 1 4 9 1 32 26 1 2 24 34 31 1 8 26 15 1 2 16 3 4 27 3 8 9 7 16 30 1 2 30 40 37 3 8 30 15 1 2 16 3 4 34 3 4 9 7 8 36 1 2 36 46 43 1 2 33 16 3 4 16 3 4 40 7 8 9 7 8 42 1 2 42 52 49 5 6 38 19 3 8 23 7 8 46 3 4 11 3 4 48 1 2 48 58 56 40 19 3 8 23 7 8 52 3 4 11 3 4 54 1 2 54 66 1 2 62 5 8 45 19 1 4 26 7 8 61 1 4 11 1 2 63 60 72 1 2 68 3 4 48 21 1 4 27 66 1 4 15 69 *Dimension may vary depending on motor. RUMO Dimensions Nominal Sq. s Recommended Roof Opening Curb Cap ID C D** 20 29 1 2 27 1 4 43 1 2 19 3 4 26 24 33 1 2 31 1 8 45 5 6 17 1 2 30 30 39 1 2 37 3 8 51 3 4 19 1 2 36 36 45 1 2 43 1 2 55 19 1 2 42 42 51 1 2 49 5 6 59 5 8 19 5 8 48 48 57 1 2 56 63 5 6 21 3 4 54 54 66 62 5 8 70 5 8 22 3 4 62 1 2 60 72 68 3 4 75 23 68 1 2 ll dimensions are in inches. **s 42 through 60 with High Temperature Option will be 5 inches larger. www.greenheck.com Propeller Tube xial Fans For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

Level CFM / Static Pressure in inches wg Motor HP Fan RPM Max HP Sones @ F Quick uild 0.1.125.2.25.375.5.625.75 1 est vailable Performance for RU Levels 1L, 2L, 3L Levels 1H, 2H, 3H 20 1L 5235 4740 4616 1/2 1084 0.60 19.3 2L 5994 5562 5453 5107 4854 3/4 1241 0.90 23 5 Days 1L 6791 6158 5984 5271 1/2 808 0.60 18.2 24 2L 7766 7230 7078 6544 6126 3/4 924 0.90 22 5 Days 3L 8900 8344 8197 7746 7426 6325 1 1135 1.20 24 1L 11108 9822 9534 8651 7844 3/4 695 0.90 18 30 2L 15407 14512 14272 13551 13148 12089 2 964 2.41 30 5 Days 3L 17745 17032 16854 16267 15864 14831 3 1154 3.61 38 1L 15364 13924 13461 11891 1 551 1.23 20 36 2L 19323 18312 17991 16893 16058 13839 3 693 2.44 29 5 Days 3L 26246 25323 25092 24418 23979 22727 21093 5 976 6.01 61 42 2L 32495 30966 30584 39505 28793 26363 23522 17009 14105 5 718 6.00 39 3L 31814 30614 30314 29314 28605 26594 24279 5 775 6.02 43 5 Days 48 2L 37987 36250 36154 34810 33838 30758 28240 22667 5 594 6.00 30 3L 44597 42992 42590 41272 40287 37706 35203 32951 29650 7 1 2 690 9.01 45 5 Days 54 2L 45751 43351 42675 40511 38535 34407 7 1 2 508 6.43 34 3L 56220 54100 53570 51903 50444 46970 42530 30918 27190 10 609 12.00 50 5 Days 60 3L 64325 61731 61082 58266 56176 50976 10 504 12.00 43 5 Days 20 1H 4295 4098 4041 3807 3669 3229 1/2 1443 0.60 21 2H 4917 4745 4702 4528 4392 4086 3663 3/4 1652 0.90 24 5 Days 1H 7382 7106 7037 6708 6491 6058 3/4 1351 0.90 26 24 2H 8070 7818 7755 7505 7286 6856 6410 1 1477 1.20 32 5 Days 3H 8358 8016 7931 7653 7458 6975 6435 5723 4403 1 1460 1.20 28 1H 10942 10328 10165 9637 9279 8280 7021 1 963 1.20 26 30 2H 13783 13295 13173 12795 12515 11811 11071 10226 9315 2 1213 2.40 34 5 Days 3H 16466 16019 15907 15572 15355 14848 14335 13804 13225 11816 3 1471 3.60 50 1H 16440 15419 15194 14454 13829 11825 1 1 2 806 1.80 28 36 2H 20683 19845 19636 19100 18742 17603 16144 14425 3 1014 3.60 41 5 Days 3H 23827 23350 23230 22872 22633 21893 21036 20140 19259 17598 5 1401 6.00 66 42 3H 28701 27935 27743 27168 26759 25703 24539 23290 21671 5 1011 6.01 57 5 Days 48 3H 40049 38999 38737 37950 37415 36025 34563 32887 31091 27128 7 1 2 876 9.01 51 5 Days 54 3H 52094 50898 50598 49701 49059 46997 44746 42298 40045 35352 10 811 12.00 54 5 Days 60 3H 58475 56842 56434 55141 54119 51563 48865 46076 43082 35057 10 673 12.00 48 5 Days Performance for RUMO 20 1L 4797 4139 3979 1/2 1060 0.55 18.3 2L 5494 4909 4775 4270 3/4 1214 0.83 22 5 Days 1L 6541 5823 5626 4981 4485 3/4 809 0.64 19 24 2L 7139 6509 6308 5776 5332 3/4 883 0.83 22 5 Days 3L 7826 7227 7094 6619 6223 1 1089 1.10 23 1L 10038 8806 8593 7542 1 696 0.91 18 30 2L 13455 12662 12435 11751 11279 9930 2 933 2.20 28 5 Days 3L 15678 14878 14675 14056 13569 12533 3 1109 3.30 36 1L 14800 13414 13080 11645 10569 1 1 2 551 1.24 20 36 2L 18614 17474 17215 16418 15687 13643 3 693 2.46 29 5 Days 3L 24355 23447 23219 22534 22076 20835 19334 5 943 5.50 49 42 2L 29635 28435 28136 27002 26190 23993 21646 18927 15694 5 701 5.50 38 3L 29671 28277 27924 26856 26137 24236 21824 5 750 5.50 42 5 Days 48 2L 34761 33231 32809 31238 30166 27319 24091 5 587 5.50 29 3L 40135 38636 38262 36897 35865 33133 30523 27663 21517 7 1 2 676 8.25 40 5 Days 54 3L 51679 49064 48379 46225 44762 40723 36435 10 591 11.00 46 5 Days 60 3L 61784 58273 57265 53754 51778 45990 10 493 11.00 40 5 Days 20 1H 3937 3559 3475 3224 1/2 1393 0.55 19.6 2H 4506 4163 4090 3870 3724 3332 3/4 1594 0.83 23 5 Days 1H 6540 6164 6065 5770 5530 4900 3/4 1259 0.83 24 24 2H 7153 6809 6722 6452 6272 5694 5096 1 1377 1.10 29 5 Days 3H 7163 6802 6707 6409 6207 5652 4968 1 1370 1.10 26 1H 10221 9462 9265 8683 8300 1 929 1.10 26 30 2H 12839 12243 12092 11621 11307 10546 9632 2 1167 2.20 32 5 Days 3H 15223 14771 14657 14306 14044 13387 12712 12008 11284 3 1420 3.30 49 1H 15501 14410 14136 13283 12677 10846 1 1 2 784 1.65 27 36 2H 19534 18669 18453 17802 17368 16187 14947 13188 3 988 3.30 39 5 Days 3H 22439 21999 21888 21558 21337 20541 19655 18786 17884 15849 5 1343 5.51 61 42 3H 26600 25642 25403 24693 24222 22921 21530 20309 18595 14836 5 960 5.50 53 5 Days 48 3H 37206 35989 35684 34792 34269 32960 31240 29257 27086 20829 7 1 2 842 8.25 47 5 Days 54 2H 38905 36804 36257 34588 33184 29443 5 585 5.50 34 3H 48021 46673 46336 45325 44533 42431 40246 37975 35307 10 776 11.00 50 5 Days 60 3H 55174 53408 52967 51583 50458 47622 44727 41352 37354 26609 10 650 11.00 46 5 Days Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : Free inlet hemispherical sone levels. Levels 1L, 2L, 3L Levels 1H, 2H, 3H 23 RDU, RU, RUMO

TUD, TU-L/H, TU-C 24 est vailable Program UL/cUL 705 Power Ventilators E40001 - TUD and TU Greenheck Fan Corporation certifies that the TUD and TU-C shown herein are licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and comply with the requirements of the MC Certified Ratings Program. Greenheck Fan Corporation certifies that the TU-L and TU-H shown herein are licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and Publication 311 and comply with the requirements of the MC Certified Ratings Program. TUD Direct Drive and TU-L/H, TU-C elt Drive Tube axial upblast roof exhaust fans are designed to efficiently remove and disperse contaminated air. They are best suited for exhausting relatively clean, dry and cool air. The TU-L/H is available with high temperature options that meet IRI, SCCI, or can be UL Listed as a Power Ventilator for Smoke Control Systems. TU-L/H High Temperature Options Option I 200 F (93 C) to 500 F (260 C) Continuous Operation Option II 500 F (260 C) for minimum of 4 hours Option III 1000 F (538 C) for minimum of 15 minutes Option IV UL Listed Power Ventilators for Smoke Control Systems Performance TUD capacities range from 2,800 to 46,000 cfm and up to 1 in. wg of static pressure. TU-L/H capacities range from 4,000 to 60,000 cfm and up to 1 in. wg of static pressure. TU-C capacities range from 2,800 to 74,000 cfm and up to 1.25 in. wg of static pressure. Standard Construction TUD TU-L/H TU-C Heavy-gauge curb cab, tubular housing and windband Propeller - cast aluminum airfoil Propeller - fabricated steel Polished steel shaft Corrosion-resistant fasteners Cast iron pillow block bearings Minimum bearing life of L 10 40,000 hours djustable motor plate utterfly backdraft damper - steel, aluminum Extended lube lines Permatector protective powder coating Options and ccessories Stock TUD TU-L/H TU-C Roof curb Curb seal Guards - inlet, outlet Magnetic damper latches Fusible link damper lifter ccess door - bolted, hinged Tie-down points NEM-1 or NEM-3R disconnect switch Shaft seal earings with high temperature grease and zerk fittings Decorative or protective powder coating UL/cUL Listed Power Ventilators www.greenheck.com Propeller Tube xial Fans For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

TUD D C Dimensions for TUD C D Nominal Sq. s Recommended Roof Opening 18 26 44 21 1 4 25 20 1 2 20 30 46 1 8 22 3 8 27 1 4 20 1 2 24 34 48 1 2 22 1 8 31 1 8 26 1 2 30 40 53 3 4 24 1 2 37 3 8 32 1 2 36 46 56 3 8 24 5 8 43 1 2 38 1 2 TUD, TU-L/H, TU-C 42 52 66 7 8 30 1 4 49 7 8 44 1 2 TU-L/H TU-C D 2½ in. 48 58 69 1 8 32 1 2 56 50 1 2 Dimensions for TU-L/H, TU-C C D Nominal Sq. s Recommended Roof Opening 18 26 48 1 4 25 1 2 25 20 1 2 20 30 51 1 2 27 3 4 27 1 4 20 1 2 24 34 52 3 4 26 3 8 31 1 8 26 1 2 C 30 40 56 3 4 27 1 2 37 3 8 32 1 2 36 46 64 3 8 32 5 8 43 1 2 38 1 2 42 52 71 34 1 4 49 7 8 44 1 2 25 2½ in. 48 58 76 3 4 40 56 50 1 2 54 64 86 3 4 44 62 5 8 50 1 2 60 70 93 3 4 48 1 8 68 3 4 50 1 2 ll dimensions are in inches. Performance for TUD 18 20 24 30 36 42 Min/Max RPM Max hp 1140 0.36 3221 2739 CFM / Static Pressure in inches wg Quick uild 0.125.25.5.75 1 est vailable 1725 1.08 4584 4348 4108 3536 1140 0.59 4448 3989 1725 1.89 5568 5267 4926 4187 860 0.37 5090 4038 1140 1.14 7383 6740 6072 1725 3.33 10695 10288 9901 9073 8095 7603 860 1.15 10898 9636 8215 1140 2.27 13691 12762 11812 9695 1725 5.44 18144 17485 16789 15137 13450 11405 860 3.29 19008 17401 15604 1140 5.44 22914 21960 20736 18177 14977 1725 11.31 29680 28872 28042 26197 24193 22056 680 2.33 21959 19186 15981 860 3.36 25086 23084 20771 14921 1140 10.98 36814 35197 33468 30373 25503 680 3.37 30936 27426 23440 48 860 5.38 36360 33983 31147 24197 1140 10.95 46455 44268 42243 38672 32978 26099 Performance certified is for installation type : Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories).

TUD, TU-L/H, TU-C 26 Performance for TU-L/H 24L 24H 30L 30H 36L 36H 42L 42H 48L 48H 54L 54H 60L 60H Min/Max RPM Max hp Sones @ 0 CFM / Static Pressure in inches wg 0.125.25.5.75 1 830 0.47 16.4 5229 4378 1085 1.05 27 6836 6241 5394 1120 0.61 23 5670 5110 4535 1935 3.14 48 9796 9449 9122 8508 7825 7061 645 0.65 15.8 8200 6783 1090 3.12 39 13858 13112 12294 800 0.61 20 7918 6962 5792 1635 5.24 62 16183 15750 15299 14317 13275 12097 525 0.93 15.2 12231 10169 790 3.16 27 18406 17049 15724 675 0.77 21 10993 9732 7998 1275 5.20 59 20764 20131 19479 18046 16295 14107 460 1.29 14.6 17129 14337 735 5.24 32 27370 25873 24085 505 0.92 17.7 14272 12245 9526 1030 7.83 55 29110 28201 27270 25161 22788 19954 355 1.29 15.2 20588 16453 645 7.76 37 37406 35385 33208 450 1.29 23 19561 17102 13778 905 10.45 65 39340 38238 37083 34465 31348 27882 335 1.85 19.3 27858 22274 595 10.39 53 49480 46830 43652 400 1.67 22 25557 22388 18005 845 15.71 75 53989 52493 51021 48133 44364 40101 315 2.39 19.7 32132 515 10.46 47 52534 48396 380 2.14 23 31149 27225 21706 735 15.57 68 60249 57945 56057 52062 47485 40615 Quick uild est vailable Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : free inlet fan sone levels. Performance for TU-C 18 20 24 30 36 42 48 54 60 Min/Max RPM Max hp CFM / Static Pressure in inches wg 0.125.25.5.75 1 1400 0.40 2980 2745 2235 1.65 4758 4616 4469 4136 3779 3368 1265 0.40 3679 3358 2980 2190 2.09 6369 6202 6016 5606 5158 4559 1015 0.43 5242 4696 4059 1975 3.13 10199 9979 9683 9072 7743 6894 820 0.49 7864 6807 5588 1810 5.23 17358 16899 16423 15453 13379 12150 745 0.65 11255 9741 7659 1700 7.85 25682 25052 24415 23061 19932 17982 595 0.94 14015 12285 1345 11.0 31680 30983 30285 28687 25203 22811 495 1.16 17450 15218 12027 1170 15.4 41246 40397 39549 37606 33275 30576 475 2.24 28091 24924 20807 1000 21.0 59138 57763 56388 53191 45765 40271 415 2.15 32356 27799 22312 950 26.0 74069 72236 70403 66236 57694 52483 Quick uild est vailable Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories).

UL/cUL 705 Power Ventilators E40001 - SF UL/cUL Listed 705 is standard on In Stock models. Greenheck Fan Corporation certifies that the SF shown herein is licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and Publication 311 and comply with the requirements of the MC Certified Ratings Program. Dimensions for SF SF-110 through 118 SF-120 C D E E est vailable Program In Stock 5 Days D C Nominal Sq. s Recommended Roof Opening 110 30 25 21 1 16 22 1 1 2 16 1 2 112 34 32 1 16 27 3 8 29 1 4 2 20 1 2 115 34 32 1 16 27 3 8 29 1 4 2 26 1 2 118 40 36 1 16 31 1 16 32 2 32 1 2 120 46 48 1 16 44 1 16 35 13 16 2 1 8 38 1 2 ll dimensions are in inches. SF elt Drive Centrifugal supply fans are designed to draw filtered untempered air from one side of the housing. Standard Construction Housing - galvanized steel Wheel - forward-curved, galvanized, double-width Cover and weatherhood - removable Corrosion-resistant fasteners NEM-1 disconnect switch Filters - one-inch aluminum, washable all bearing motor - 1/4 hp and larger Double-studded vibration isolators Lifting lugs djustable motor pulley Options and ccessories Damper Roof curb Roof curb accessories - adaptors, extensions Duct adaptor NEM rated disconnect switch Dual drives UL/cUL Listed Power Ventilators Performance for SF 110 112 115 118 120 Stock CFM Quick RPM / Static Pressure in inches wg Max Sones uild HP @.25 est.125.25.5 1 1.25 1.5 2 2.5 3 vailable In Stock 820 432 549 0.08 11.9 1180 525 616 780 0.26 11.2 1540 632 707 844 1082 1192 0.66 11.7 1900 745 809 927 1140 1238 1328 1.02 14.1 5 Days SF-110-LMDX-QD 2260 859 920 1023 1210 1.05 17.6 2620 977 1032 1.04 22 1250 390 483 0.11 12.6 1750 459 549 682 0.31 12.7 2250 549 615 745 0.61 14.9 2750 647 698 810 990 1077 1.21 19.9 5 Days SF-112-LMDX-QD 3250 748 790 880 1063 1.54 23 3750 849 888 962 1.50 27 1300 316 407 546 0.34 8.9 2000 387 463 586 781 861 934 1.23 9.0 2700 479 534 642 821 898 970 1098 2.12 11.2 3400 577 621 712 870 942 1011 1.91 16.5 5 Days SF-115-LMDX-QD 4100 677 717 785 935 2.04 21 4800 780 815 1.96 26 2500 294 359 466 0.57 9.4 3700 376 426 516 664 734 800 1.67 10.1 4900 466 508 582 713 772 828 932 1034 4.46 14.5 6100 563 594 661 775 828 878 973 1059 5.08 20 5 Days SF-118-LMDX-QD 7300 662 688 744 846 895 939 4.63 27 8500 760 786 831 5.10 34 4000 275 325 414 553 612 1.41 13.2 6000 363 403 472 594 647 695 788 871 4.28 19.6 8000 462 491 550 649 698 744 828 903 975 8.14 23 10000 564 588 635 726 766 803 880 952 1020 9.77 29 5 Days 12000 668 689 725 806 844 879 9.46 39 14000 772 791 10.11 51 Performance certified is for installation type : Free inlet, Ducted outlet. Power rating (hp) does not include transmission losses. Performance ratings include the effects of filters. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : Free inlet hemispherical sone levels. 27 SF For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative. www.greenheck.com Centrifugal Supply Fans

RSF, RSFP 28 RSF est vailable Program RSF 5 Days UL/cUL 705 Power Ventilators E40001 - RSF, RSFP Greenheck Fan Corporation certifies that the RSF and RSFP shown herein are licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and comply with the requirements of the MC Certified Ratings Program. Dimensions for RSF sq. sq. C 2 C 1 /2 in. Nominal Sq. s Recommended Roof Opening Damper 90 26 35 1 8 23 1 4 15 12 100 30 41 1 8 23 1 4 17 14 120 34 47 1 8 27 1 4 21 18 150 40 53 1 8 31 1 4 23 20 180 46 61 1 8 34 1 4 29 26 200 52 73 1 8 39 1 4 33 30 ll dimensions are in inches. RSFP L Dimensions for RSFP sq. RSFP L sq. CL 2 CL 1 /2 in. Nominal Sq. s Recommended Roof Opening Damper 90 26 31 7 8 25 3 8 15 12 100 30 35 7 8 25 3 8 17 14 120 34 39 7 8 29 3 8 21 18 150 40 45 7 8 33 3 8 23 20 180 46 51 7 8 35 3 8 29 26 200 52 58 3 16 40 3 8 33 30 ll dimensions are in inches. RSF and RSFP elt Drive Centrifugal supply fans are designed to draw filtered untempered air from all four sides of the housing. Standard Construction RSF RSFP Housing - galvanized steel Housing - louvered penthouse, extruded aluminum Wheel - forward-curved, steel, double-width Insulated removable cover with quick release latches Corrosion-resistant fasteners Filters - one-inch aluminum, washable all bearing motor - 1/4 hp and larger Double-studded vibration isolators djustable motor pulley Options and ccessories Stock RSF RSFP Damper Roof curb Roof curb accessories - seals, adaptors, extensions Duct adaptor Tie-down points NEM rated disconnect switch Dual drives Decorative or protective powder coating Certified for high wind and seismic applications UL/cUL Listed Power Ventilators Performance for RSF, RSFP CFM RPM / Static Pressure in inches wg.125.25.5.75 1 1.25 1.5 1.75 2 Max HP Sones @.25 Quick uild est vailable 700 447 575 0.06 5.6 1020 533 639 818 971 0.24 8.5 90 1340 640 724 880 1017 1142 1256 0.53 9.1 1660 754 826 958 1082 1194 1301 0.72 10.4 5 Days 1980 873 935 1048 1159 0.74 12.2 2300 995 1048 0.78 14.7 700 377 504 0.05 4.2 1240 476 572 733 875 0.27 6.3 100 1780 605 679 813 931 1040 1143 1239 0.77 11.3 2320 747 807 917 1020 1116 1204 1291 1371 1450 1.40 13.9 5 Days 2860 898 945 1040 1127 1212 1293 1.54 16.4 3400 1053 1089 1.54 19.8 1150 330 430 0.09 5.0 1840 409 487 622 737 0.41 8.5 120 2530 506 569 682 781 874 958 1.04 11.7 3220 615 664 760 847 930 1005 1079 1148 1.79 14.9 5 Days 3910 728 766 849 927 997 1069 2.06 19.2 4600 845 877 2.09 21 1625 274 362 0.13 7.6 2665 340 410 524 0.47 9.7 150 3705 425 477 576 659 739 813 1.54 13.1 4745 517 560 642 719 785 850 913 972 2.84 16.7 5 Days 5785 612 649 715 785 849 2.94 22 6800 708 739 3.14 26 2450 241 317 0.20 4.7 4040 310 363 459 544 0.96 7.5 180 5630 394 434 510 579 647 711 768 2.64 11.8 7220 478 516 581 639 691 747 799 852 4.35 17.0 5 Days 8810 570 601 654 710 758 803 5.19 23 10400 666 687 5.19 27 2900 200 266 0.20 3.9 5180 261 307 389 462 525 1.40 6.3 200 7460 341 374 438 497 553 603 654 700 744 4.06 11.2 9740 428 452 503 553 600 644 687 729 768 5.90 17.0 5 Days 12020 518 538 578 619 660 698 737 7.44 24 14300 609 626 7.66 31 Performance certified is for installation type : Free inlet, Ducted outlet. Power rating (hp) does not include transmission losses. Performance ratings include the effects of one-inch aluminum filters. The MC Certified Ratings Seal applies to air performance only. www.greenheck.com Centrifugal Supply Fans For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

est vailable Program 5 Days Shown with tall base option. UL/cUL 705 Power Ventilators E40001 - RE2, RS2, RCE3, RCS3, RE, RS, RCE, RCS Greenheck Fan Corporation certifies that the RE2, RS2, RCE3, RCS3, RE, RS, RCE, RCS shown herein are licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and Publication 311 and comply with the requirements of the MC Certified Ratings Program. RE2, RS2, RCE3, RCS3 Direct Drive and RE, RS, RCE, RCS elt Drive Hooded roof fans are designed to exhaust or supply high volumes of air from commercial and industrial buildings. Interlocking fabra hood design consists of four material thicknesses at each rib location ensuring strength in severe conditions. Some models are available as filtered or reversible. Standard Construction Direct Drive RE2 RS2 RCE3 RCS3 elt Drive RE RS RCE RCS Hood and base - galvanized steel Propeller - cast aluminum Propeller - fabricated steel irdscreen - galvanized Corrosion-resistant fasteners Filters - two-inch aluminum, washable (RF, RCF, RPRF, RPDRF) all bearing motor - 1/4 hp and larger Relubricatable bearings djustable motor pulley Options and ccessories Stock RE2 RS2 RCE3 RCS3 RE RS RCE RCS Damper Roof curb Roof curb accessories - seals, adaptors, extensions Tall base with access door Hood and base - aluminum Hood insulation Safety guards Wiring - pigtails Lube lines Tie-down points and lifting lugs NEM rated disconnect switch Dual drives Decorative or protective powder coating Certified for high wind and seismic applications UL/cUL Listed Power Ventilators 29 RE2, RS2, RCE3, RCS3, RE, RS, RCE, RCS T TD W C D Dimensions Direct Drive s 18-54 elt Drive s 20-72 Fan Panel Sq. Standard ase Tall ase Standard Hood Filtered Hood C D T TD W x L W x L Damper Sq. Roof Opening Sq. 18 28 1 4 13 23 10 40 1 4 27 1 4 48 x 51 18 20 1 2 Tall ase Option 2½ in. 20 30 1 4 16 27 11 44 1 4 28 1 4 54 x 51 54 x 51 20 22 1 2 24 34 1 4 18 29 11 46 1 4 28 1 4 66 x 63 66 x 63 24 26 1 2 L 30 40 1 4 20 34 14 51 1 4 31 1 4 75 x 75 78 x 87 30 32 1 2 36 46 1 4 22 39 1 2 17 1 2 56 3 4 34 3 4 88 x 87 94 x 87 36 38 1 2 42 52 1 4 24 42 1 2 18 1 2 59 3 4 35 3 4 86 x 99 93 x 99 42 44 1 2 48 58 1 4 24 43 1 2 19 1 2 60 3 4 36 3 4 93 x 111 112 x 111 48 50 1 2 54 64 1 4 26 1 2 49 22 1 2 66 1 4 39 3 4 112 x 111 124 x 123 54 56 1 2 Tall ase Option 60 70 1 4 26 1 2 50 23 1 2 67 1 4 40 3 4 124 x 123 136 x 135 60 62 1 2 72 82 1 2 29 53 24 70 1 4 41 1 4 136 x 135 136 x 147 72 74 1 2 ll dimensions are in inches. For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative. www.greenheck.com Hooded Propeller Exhaust and Supply Fans

RE2, RS2, RCE3, RCS3, RE, RS, RCE, RCS 30 Number Code The model number system is designed to completely identify the fan. The correct code letters must be specified to designate belt drive with exhaust, supply or filtered supply air configurations. The remainder of the model number is determined by the size and performance. Performance for RE2 Exhaust Hooded Roof Propeller elt Drive R - Fabricated Propeller RC - Cast Propeller (Level 3 only) E - Exhaust S - Supply F - Filtered Supply Level of Construction 1, 2, 3 CFM / Static Pressure in inches wg 0.1.125.2.25.375.5.625.75 1 R E - 2 L 24-7 Motor HP Motor HP 4 = 1/4 15 = 1½ 75 = 7½ 3 = 1/3 20 = 2 100 = 10 5 = 1/2 30 = 3 150 = 15 7 = 3/4 50 = 5 200 = 20 10 = 1 Fan Propeller Type L - Low H - High Fan RPM Max HP Sones @ F Quick uild est vailable 18 3386 2996 2886 2557 2378 1720 1/3 1160 0.39 16.9 3981 3765 3711 3553 3444 3146 2787 2390 1857 1373 1/2 1750 0.58 24 5 Days 20 3970 3574 3474 3089 2809 2126 1/3 1160 0.39 18.9 6483 6222 6157 5936 5774 5338 4911 4495 3955 2613 1 1 2 1750 1.87 36 5 Days 5761 5091 4880 4303 3832 2238 1/2 860 0.57 20 24 7340 6909 6772 6370 6116 5412 4579 1 1160 1.15 26 5 Days 8958 8723 8665 8489 8355 7991 7598 7157 6658 5501 2 1750 2.22 42 30 11552 10704 10497 9821 9289 7635 5280 4396 1 1 2 860 1.80 33 12763 12327 12219 11885 11552 10706 9843 8931 7789 5540 2 1160 2.31 34 5 Days 36 14330 13477 13241 12532 12053 10674 9238 7414 5518 2870 1 1 2 860 1.70 32 17695 17217 17098 16739 16434 15589 14632 13650 12637 10360 3 1160 3.51 41 5 Days 42 24809 24003 23801 23188 22562 20827 19325 17993 16421 12586 5 860 5.75 42 5 Days 48 30865 29709 29420 28491 27794 26120 24429 22624 20654 16320 5 860 5.89 54 5 Days 54 36939 34858 34325 32693 31655 28940 26112 23257 20185 14004 5 690 5.77 53 41470 40161 39834 38758 37868 35722 33672 31561 29317 24635 7 1 2 860 8.67 55 5 Days Performance for RCE3 Exhaust CFM / Static Pressure in inches wg 0.1.125.2.25.375.5.625.75 1 Motor HP Fan RPM Max HP Sones @ F Quick uild est vailable 20 4289 3954 3857 3520 3319 2393 2037 1369 722 1/2 1160 0.58 16.8 5547 5343 5292 5125 5011 4730 4430 4085 3408 2690 1 1750 1.21 29 5 Days 5278 4692 4531 4020 3515 1734 790 1/3 860 0.37 14 24 8028 7553 7419 6982 6683 5916 4996 3091 2248 1 1160 1.20 23 5 Days 9652 9360 9287 9061 8901 8523 8192 7795 7372 6379 2 1750 2.41 39 30 9883 8802 8568 7840 7302 4215 1 860 1.15 20 12868 12202 12037 11541 11136 10061 9091 7917 5544 2654 2 1160 2.41 28 5 Days 36 16244 14958 14614 13167 11879 7823 5353 3370 2 860 2.35 29 21911 20994 20756 19993 19413 17563 15139 11778 9457 6158 5 1160 5.76 44 5 Days 42 19575 17650 17067 15425 14385 10580 5867 2 690 2.33 24 22468 21128 20720 19447 18603 16393 14043 10986 7237 3 860 3.31 32 5 Days 48 26494 24087 23315 21222 19772 13442 8960 3 690 3.45 28 34013 31658 31127 29379 28063 24292 18161 15030 11775 7 1 2 860 7.80 42 5 Days 54 36212 33116 32365 30348 29048 25306 21143 14888 5 690 5.59 46 42298 40107 39559 38113 37160 34639 31463 28305 25033 16045 7 1 2 860 8.37 55 5 Days Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings include the effects of a birdscreen. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : free inlet hemispherical sone levels.

Performance for RE Levels 1L, 2L, 3L Exhaust Level CFM / Static Pressure in inches wg 0.1.125.2.25.375.5.625.75 1 Motor HP Fan RPM Max HP Sones @ F Quick uild est vailable 20 1L 4525 4180 4095 3825 3562 1/2 1025 0.60 16.9 2L 5169 4866 4791 4569 4409 3807 3135 2341 1759 3/4 1171 0.90 21 5 Days 1L 6418 5895 5767 5191 4813 3/4 809 0.68 16.6 24 2L 7045 6567 6450 5991 5636 4721 3650 2683 3/4 888 0.90 19.2 5 Days 3L 7329 7010 6926 6672 6503 6082 5502 4640 1 1278 1.20 26 1L 9938 8931 8653 7789 6795 1 696 0.95 19.8 30 2L 12337 11537 11329 10675 10214 8597 6789 5337 3697 1 1 2 864 1.81 28 5 Days 3L 11661 11122 10987 10573 10241 9412 8026 6430 5042 3449 1 1 2 996 1.80 30 1L 13614 12080 11667 10425 9480 1 551 1.21 17.7 36 2L 17123 15884 15591 14644 13986 12256 10416 7791 5177 2 693 2.40 27 5 Days 3L 19176 18498 18329 17814 17453 16516 15416 13927 12092 7865 3 922 3.61 37 42 3L 28038 27244 27046 26394 25859 24522 23097 21119 19272 13887 5 868 6.01 39 5 Days 48 3L 33135 31849 31527 30562 29743 27622 25451 23022 19395 15045 5 690 6.02 32 5 Days 54 3L 44393 42564 42106 40659 39669 37113 34363 31450 27707 21765 7 1 2 650 9.27 39 5 Days 60 3L 56645 54544 53978 52124 50801 47250 43881 40629 36745 27742 10 582 12.1 43 5 Days 72 3L 82283 79119 78328 75876 74199 69854 65283 60221 54396 42796 15 508 18.0 52 5 Days Performance for RE Levels 1H, 2H, 3H Exhaust Level CFM / Static Pressure in inches wg 0.1.125.2.25.375.5.625.75 1 Motor HP Fan RPM Max HP Sones @ F Quick uild est vailable 20 1H 4015 3778 3721 3549 3422 3104 2733 2094 1/2 1348 0.60 24 2H 4617 4410 4359 4209 4109 3837 3560 3244 2638 3/4 1550 0.90 31 5 Days 1H 5407 5101 5003 4698 4473 3945 1/2 1152 0.60 29 24 2H 6153 5884 5817 5560 5383 4901 4430 3759 3144 1986 3/4 1311 0.90 34 5 Days 3H 7019 6706 6628 6367 6193 5766 5313 4800 3901 2764 1 1461 1.20 29 1H 8717 8072 7899 7361 6992 5871 4176 3/4 895 0.90 23 30 2H 10958 10462 10329 9915 9632 8907 8114 7084 5500 4359 1 1 2 1125 1.80 34 5 Days 3H 12938 12452 12331 11960 11712 11029 10290 9534 8799 7147 2 1239 2.41 36 1H 13075 11644 11361 10574 9946 7949 5287 1 679 1.20 19.2 36 2H 16484 15209 14985 14311 13893 12777 11342 9566 7133 2 856 2.40 34 5 Days 3H 21459 21027 20919 20595 20380 19848 19309 18381 17651 15848 5 1357 6.01 55 42 2H 28151 27191 26951 26113 25492 23950 22791 21431 20004 16721 7 1 2 907 6.87 79 3H 26074 25040 24812 24222 23791 22526 21581 20362 19109 16508 5 898 6.01 37 5 Days 48 2H 32802 31467 31134 29729 28991 27388 25394 23296 20980 16755 5 734 6.05 49 3H 35819 34711 34434 33592 32994 31499 30055 28614 27145 24209 7 1 2 842 9.01 45 5 Days 54 2H 37837 35990 35477 33902 32810 29925 26992 24138 20503 12878 7 1 2 562 6.27 72 3H 45490 44279 43977 43103 42593 41317 39704 38024 36651 32982 10 795 12.0 61 5 Days 60 2H 43719 41547 41005 39377 38264 35387 32285 29285 25738 14495 7 1 2 559 7.00 39 3H 52948 51154 50706 49366 48472 46186 43809 41335 38757 33604 10 677 12.0 49 5 Days 72 3H 74799 72929 72461 71059 70066 67088 64146 61218 58111 50925 15 606 18.0 59 5 Days 31 RE2, RS2, RCE3, RCS3, RE, RS, RCE, RCS Performance for RCE Level 3H Exhaust Level CFM / Static Pressure in inches wg 0.1.125.2.25.375.5.625.75 1 Motor HP Fan RPM Max HP Sones @ F Quick uild est vailable 24 3H 8669 8332 8259 8041 7885 7481 7075 6588 6049 4420 1 1 2 1605 1.80 37 5 Days 30 3H 14501 14023 13903 13522 13262 12616 11935 11188 10361 8625 3 1476 3.61 41 5 Days 36 3H 22572 21982 21835 21366 21050 20257 19438 18573 17639 15808 5 1591 6.01 50 5 Days 42 3H 27358 26462 26238 25557 25095 23913 22668 21413 20072 16964 5 1238 6.01 47 5 Days 48 3H 37602 36431 36143 35380 34871 33292 31648 30046 28305 24604 7 1 2 1299 9.01 67 5 Days 54 3H 45235 44052 43757 42870 42285 40822 39428 38072 36508 32833 10 968 12.0 56 5 Days 60 3H 51863 50294 49902 48734 47965 46050 44255 42335 40041 34764 10 814 12.0 49 5 Days 72 3H 77955 75436 74807 72914 71576 68231 64867 61125 56486 47522 15 714 18.0 56 5 Days Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings include the effects of a birdscreen. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : free inlet hemispherical sone levels.

GRS, GRSF, FGI, FGR, RGU 32 Gravity Ventilators GRS FGI, FGR RGU GRSF est vailable Program GRS-8 through 30 In stock GRSF-10 and 12 GRS-36 through 48 GRSF-8, 15 through 24 FHI, FGR 8 x 8 through 72 x 180 5 Days RGU-18 through 60 GRS, GRSF, FGI, FGR and RGU Gravity ventilators are designed to relieve or take in air via building pressure. s buildings become pressurized, they will relieve the air from the building and as they come under a negative pressure, they will allow air into the building. Standard Construction GRS GRSF FGI, FGR Housing - spun aluminum GRS s 8 thru 24 Dia. C D 1¾ GRS s 30 thru 48 Dimensions for GRS, GRSF Dia. C D 1¾ C D E Dia. GRSF with Optional Flashing Flange s 8 thru 24 Throat rea (ft 2 ) 8 19 20 1 2 7 1 4 1 1 2 20 1 4 8 1 4 0.37 10 19 20 1 2 7 3 4 2 20 1 4 10 1 4 0.57 12 22 29 10 3 1 2 23 1 4 12 1 4 0.82 15 22 29 10 3 1 2 23 1 4 14 1 4 1.12 16 26 29 11 4 1 4 27 1 4 16 1 4 1.45 18 30 35 1 2 9 3 4 1 3 4 31 1 4 20 1 4 1.83 20 30 35 1 2 11 1 4 3 3 4 31 1 4 20 1 4 2.25 24 34 38 1 4 11 4 35 1 4 24 1 2 3.24 30 40 48 18 3 4 5 7 16 30 1 2 5.03 36 46 56 3 4 21 1 4 6 36 1 2 7.29 42 52 63 1 4 24 1 4 6 1 4 42 1 2 9.77 48 58 72 26 1 4 6 1 2 48 1 2 12.83 ll dimensions are in inches. Dia. E RGU Housing - fabra hood, galvanized or aluminum Housing - upblast, galvanized irdscreen - galvanized Corrosion-resistant fasteners utterfly dampers - galvanized, aluminum Options and ccessories Stock GRS GRSF FGI, FGR RGU Damper Roof curb Roof curb accessories - adaptors, extensions Damper lifters - fusible link, motorized irdscreen - aluminum Insect screen Insulation - 1 2 or 1-inch Filters - 2-inch aluminum, washable (FGI) Tie-down points 12-inch high base Decorative or protective powder coating Certified for high wind applications D C www.greenheck.com Gravity Intake and Relief Ventilators For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

Performance for GRS, GRSF CFM / Total Pressure Drop in inches wg Quick uild.04.06.08.1.15.2.25.3.35 est vailable In Stock 8 Relief 231 282 326 365 446 516 576 631 682 Intake 178 218 252 282 345 398 445 488 527 GRS-8-QD 10 Relief 331 406 468 524 641 741 828 907 980 GRS-10-QD Intake 279 342 395 442 541 624 698 765 826 GRSF-10-QD 12 Relief 468 573 662 740 907 1047 1171 1282 1385 GRS-12-QD Intake 400 490 566 633 775 895 1001 1097 1184 GRSF-12-QD 15 Relief 663 811 937 1048 1283 1481 1656 1814 1960 Intake 553 677 782 874 1071 1237 1383 1515 1636 GRS-15-QD 16 Relief 870 1065 1230 1375 1685 1945 2175 2382 2573 Intake 742 908 1049 1173 1436 1658 1854 2031 2194 GRS-16-QD 18 Relief 1060 1298 1499 1676 2052 2370 2649 2902 3135 Intake 901 1104 1274 1425 1745 2015 2253 2468 2665 GRS-18-QD 20 Relief 1284 1572 1815 2029 2486 2870 3209 3515 3797 Intake 1096 1343 1550 1733 2123 2452 2741 3002 3243 GRS-20-QD 24 Relief 1879 2301 2657 2971 3638 4201 4697 5145 5558 Intake 1542 1888 2180 2438 2985 3447 3854 4222 4560 GRS-24-QD 30 Relief 2281 2794 3226 3607 4418 5101 5703 6247 6748 Intake 2013 2465 2847 3183 3898 4501 5032 5512 5954 GRS-30-QD 36 Relief 3279 4016 4637 5184 6349 7331 8197 8979 9699 Intake 2921 3577 4130 4618 5656 6531 7301 7998 8639 42 Relief 4672 5722 6607 7387 9047 10447 11680 12795 13820 Intake 3911 4791 5532 6185 7574 8746 9779 10712 11570 48 Relief 6211 7607 8783 9820 12027 13888 15527 17009 18372 Intake 5139 6294 7268 8126 9952 11491 12848 14074 15201 GRS-8 through 24 have a one-piece cover and shroud. ccess is gained through the removal of screws. GRS-30 through 48 have a removable cover, separate from the shroud, to facilitate maintenance and servicing of dampers. 33 GRS, GRSF, FGI, FGR, RGU Performance for FGI, FGR Intake (per square foot of throat area) Static Pressure Drop Relief (per square foot of throat area) Static Pressure Drop Ducted.030.047.071.089.119.149.024.043.060.084.107.136 Non-Ducted.053.085.127.158.212.267.042.075.105.146.186.236 Hood Intake Velocity 235 297 364 406 470 527 Throat Velocity 475 600 735 820 950 1065 420 560 660 780 880 990 RGU with Curb Cap 1¾ in. Curb Cap Dimensions for RGU C E Curb Cap Recommended Roof Opening 18 25 22 20 1 4 18 1 2 28 22 20 27 1 4 24 21 1 4 20 1 2 30 24 24 31 1 8 26 24 24 1 2 34 28 30 37 3 8 30 26 3 4 30 5 8 40 34 36 43 1 2 33 29 1 4 36 5 8 46 40 42 48 7 8 38 34 1 4 42 3 4 52 46 48 56 40 34 1 4 48 1 2 58 52 54 62 5 8 45 40 1 4 55 66 1 2 60 60 68 3 4 48 43 1 8 61 72 1 2 66 ll dimensions are in inches. RGU without Curb Cap E C Performance for RGU Throat rea (ft 2 ) CFM / Total Pressure Drop in inches wg Minimum CFM Required to Open Dampers 0.1 0.2 0.3 0.4 0.5 0.6 0.7 luminum Galvanized 18 1.83 1460 2065 2530 2921 3265 3577 3864 2750 3520 20 2.26 1825 2581 3162 3651 4081 4471 4830 3170 4090 24 3.24 2800 3959 4851 5601 6260 6859 7409 3950 5220 30 5.03 4781 6759 8281 9562 10687 11709 12648 6050 7130 36 7.22 7602 10749 13168 15206 16995 18620 20113 7620 10980 42 9.85 10290 14548 17823 20580 23002 25201 27222 11050 13550 48 12.83 14142 19994 24494 28284 31612 34635 37412 12820 16420 54 16.50 18508 26155 32041 36999 41352 45306 48940 21430 21430 60 20.29 24031 33981 41630 48071 53727 58863 63585 24820 24820 Values shown in gray are not recommended.

IC, ICO ir Circulators and Mancoolers IC and ICO Direct Drive ir circulator fans are non-oscillating and oscillating direct-driven two-speed fans designed for air movement in humid and demanding applications and are suitable for spot cooling and recirculating air in factories, warehouses, manufacturing facilities, and garages. Fan heads utilize a vertical locking tilt adjustment for directing air where it is needed. required mounting accessory is to be purchased separately. Performance IC capacities range from 3,055 to 9,704 cfm. ICO capacities range from 3,055 to 9,612 cfm. 34 UL/cUL 507 E33599 - IC and ICO UL/cUL Listed 507 is standard on In Stock models. est vailable Program Standard Construction Propeller - three-bladed, aluminum OSH compliant polyester powder-coated wire guard Totally enclosed air over permanent split capacitor motor Factory-wired, 10 foot power cord with 3-conductor plug Pull chain switch all bearings Maximum ambient temperature of 104 F Oscillating units sweep through 45 or 90 arc Options and ccessories Pedestal mount Pedestal wheel kit Wall/post/ceiling mount bracket Suspension mount bracket (IC) I-beam mount bracket In Stock IC - Non-Oscillating ICO - Oscillating Dimensions for IC, ICO Propeller Diameter Propeller Diameter Non-Oscillating Oscillating IC-20 20 23 12 1 4 ICO-20 20 23 16 1 4 IC-24 24 27 12 1 4 ICO-24 24 27 16 1 4 IC-30 30 33 14 1 4 ICO-30 30 33 19 ll dimensions are in inches. www.greenheck.com Circulator and Mancooler Fans For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

Performance for IC, ICO HP RPM Voltage Non-Oscillating, 2-speed IC-20 IC-24 IC-30 Operating mps Operating Watts CFM (F) ir Velocity (FPM) 10 ft. 20 ft. 40 ft. 60 ft. 1/4 750 115 0.66 100 3055 585 375 156 100 1/4 1075 115 0.94 130 4700 900 580 240 155 1/3 750 115 2.30 250 3800 670 465 190 100 1/3 1075 115 3.40 410 6100 970 570 230 120 1/2 750 115 3.10 350 8712 1110 700 290 170 1/2 1075 115 3.70 370 9704 1190 750 310 180 Oscillating, 2-speed ICO-20 ICO-24 ICO-30 1/4 750 115 0.51 57 3055 585 375 156 100 1/4 1075 115 2.30 170 4700 900 580 240 155 1/2 750 115 3.30 360 4460 710 325 145 60 1/2 1075 115 4.70 490 6400 1020 410 185 80 1/2 750 115 2.60 290 8674 1130 650 310 160 1/2 1075 115 4.10 410 9612 1220 710 340 175 In Stock IC-20-4-J1-QD IC-24-3-J1-QD IC-30-5-J1-QD ICO-20-4-J1-QD ICO-24-5-J1-QD ICO-30-5-J1-QD IC, ICO ccessories Pedestal and Pedestal Wheel Kit Pedestal Pedestal is designed to station non-oscillating and oscillating air circulator fans. It is constructed of PED-CG72-QD steel with pre-punched mounting holes and is UL Pedestal Wheel Kit Listed when used with Greenheck s air circulator PED-WK-QD fans. The wheel kit accommodates the pedestal to provide easy movement of a fan. oth the pedestal and the wheel kit brackets have a gray polyester powder coating. djustable for circulator heights of 42 to 72 inches 35 33 inch diameter Mounting rackets Wall, Post, Ceiling Mounting brackets are designed to mount non-oscillating and oscillating air circulator fans from walls, posts, ceiling beams, rafters or columns to provide multidirectional airflow. ccessories have KT-WPC-100-QD pre-punched mounting holes and are UL Listed when used with Greenheck's air circulator fans. The Suspension suspension bracket is not intended for use with oscillating circulators. The wall/post/ceilings bracket KT-SPN-100-QD includes a small swivel bracket allowing circulators to pivot from left to right and is not recommended l-eam for use with oscillating circulators when ceiling mounted. The I-beam bracket includes a removable yoke adapter to add additional length if required. KT-IM-100-QD 33 KT-WPC KT-SPN 21 8 2 1 8 KT-IM 13½ 12 1 8 5 11 14½ 14 15¼ 17 8 21 8 ll dimensions are in inches. 12½ 7 8 7 8 6 1 17 8 ¾ 11 9 25 8

MCY, MC 36 MC est vailable Program MCY Greenheck Fan Corporation certifies that the MC shown herein are licensed to bear the MC seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and comply with the requirements of the MC Certified Ratings Program. MCY and MC Direct Drive Tube axial fans are designed for applications where localized air direction and circulation are required. Mancoolers increase comfort levels in high temperature work environments, cool processes and equipment, remove smoke and fumes and generate a barrier for insects. These fans are also effective in destratifying air. Warm air accumulated at the ceiling level can be directed toward the floor and hot spots can be dissipated. Destratifying reduces energy costs and directs air where it is needed. Multiple mancoolers can also be used as part of a general plant ventilation system to improve air quality and general comfort. Performance Capacities range from 3,000 to 33,000 cfm with guards and 3,400 to 37,000 cfm without guards. Standard Construction Heavy gauge continuously welded scroll Tapered airfoil blades - aluminum Guards - OSH Options and ccessories Casters (MC) NEM rated disconnect switch Extended motor wiring Multiple mounting arrangements Permatector protective powder coating Inlet bells Decorative or protective powder coating Mancooler Mounting rrangements and Dimensions MCY Yoke Mount This mounting arrangement allows the fan to be mounted on vertical or horizontal beams. irflow direction is unlimited. The fan housing can rotate 360 within the yoke, which can also rotate 360 on its axis. MC ase Mount The base mount allows the fan to be mounted directly to floors, walls or ceilings. Fans can be rotated a full 360. The caster mounted option (shown right) allows even the largest size fans to be portable. Multiple Mancooler Installation Multiple mancoolers can be used as part of a general plant ventilation system to improve air quality and individual comfort. In the winter, they can move hot air from the ceiling to the floor and break up hot spots generated by unit heaters. (see diagram) Sidewall Supply Fans D D Sidewall Exhaust C C Fans MCY - Yoke Mount* C D Unit Weight MC - ase Mount C D Unit Weight 18 27 36 18 25½ 140 18 26 28 22 17 120 20 29 39 19 27 160 20 28 29 23 17½ 140 24 33 42 19 28½ 190 24 32 33 28 19½ 170 30 39 49 21 32 240 30 38 40 28 23 220 36 45 55 21 35½ 350 36 45 47 34 27 330 42 51 64 27 41 600 42 51 53 40 30 590 48 58 70 27 43 660 48 58 60 42 33½ 660 ll dimensions are in inches. To ensure proper installation, beam or other structure fan is to be mounted on must be capable of supporting fan weight. Weights (lbs.) shown include the motor weight for the maximum frame size motor. Columns,, and C have been rounded up to the nearest inch. *Yoke mount shown without guards. www.greenheck.com Circulator and Mancooler Fans For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

1 2 3 4 5 6 7 8 9 11 10 12 offi ce work Company-wide clean, quiet air. 1 2 3 4 5 6 7 8 9 10 11 12 Modular Small Cabinet Fan High-Temperature Roof Upblast Fan Louvered Gravity Ventilator Energy Recovery Ventilator Centrifugal Inline Fan Spun luminum Roof Exhaust Propeller Roof Upblast Fan ir-to-ir Energy Recovery Equipment Screen Inline Cabinet Fan with Damper Ceiling Exhaust Fan Combination Fire/Smoke Damper When do office workers notice their ventilation equipment? When they feel stuffy or uncomfortable. When fan noise disrupts their meeting. When they experience a change of climate from one room to the next. t Greenheck, we ensure that your contributions to comfort and productivity in the workplace will go unnoticed. We do it by manufacturing a complete line of ventilation products so you can design an integrated, balanced air system that delivers value with quick, cost-saving installation; energy efficiency; quiet operation; and comfort. You ll never achieve such performance by mixing and matching HVC brands. Our extensive testing ensures that you can select more products with certifications from MC, UL, ETL, HRI and CS than from any other manufacturer. Engineering expertise and industry knowledge deliver value you can depend on every day. Got an office job? Contact your Greenheck representative today. Learn more at greenheck.com/4office Fans & Ventilators Centrifugal & Vane xial Fans Energy Recovery Ventilators Packaged Ventilation Systems Make-up ir Units Kitchen Ventilation Systems Dampers Louvers Lab Exhaust Systems Coils 715.359.6171 greenheck.com Scan code to learn more about office system ventilation.

SP, CSP 38 Inline, Ceiling and Sidewall Exhaust SP CSP UL/cUL 507 - E33599 - Ceiling Exhaust Fans SP-390 and smaller and SP- are UL/cUL Listed for above bathtub/shower with GFCI branch protected circuit. SP-C is UL/cUL Listed UL/cUL Listed 507 is standard on In Stock models. Greenheck Fan Corporation certifies that the SP shown herein is licensed to bear the MC seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and MC Publication 311 and comply with the requirements of the MC Certified Ratings Program. UL/cUL 507 - Cabinet Fans - E33599 CSP- and CSP- are UL/cUL Listed. UL/cUL Listed 507 is standard on In Stock models. Greenheck Fan Corporation certifies that the CSP shown herein is licensed to bear the MC seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and comply with the requirements of the MC Certified Ratings Program. SP-C50 SP-50 through 200 SP-50 through 1550 SP-80-VG, SP-80L-VG SP-110-VG, SP-110L-VG CSP-110 through 200 CSP-110 through 1550 CSP-1750 through 3600 est vailable are 115 volt. est vailable Program In Stock SP and CSP Direct Drive Centrifugal ceiling and inline fans are designed for clean air applications where low sound levels are desired. SP Ceiling CSP Inline Standard Construction C VG Housing - galvanized steel Housing - low profile Housing - insulated Wheel - forward-curved ccess panel Electrical disconnect Electrical knockouts Electrical junction box Mounting brackets ackdraft damper Flanges - inlet and outlet Designer grille - up through size 390 luminum grille - sizes 410 and larger Grille assembly - SP80 and 110-VG only Lighted grille assembly - SP-80L and 110L-VG only SP Ceiling CSP Inline Options and ccessories Stock C VG Discharge accessory - transitions vailable as standard on select sizes Discharge accessories - roof, wall Electrical accessories - speed control, motion detector, time delay Transformer Switches - 1 or 2 function Firestat Isolators - hanging Grille - decorative, stainless steel, aluminum Lighted grille - SP-, sizes 50 thru 390 SP-, sizes 50 thru 200 - ulbs - incandescent, compact fluorescent - Lens - frosted, prismatic Filters Ceiling radiation damper Contractor 4 Packs - housing and motor packs separate Motor - 50 or 60 Hz (select sizes) - 115 or 277 volt (select sizes) Select sizes and models with the Vari-Green motor are available in stock. www.greenheck.com Ceiling and Cabinet Fans For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

C SP-C E D SP- E D C C SP-50-90 3 15 /16 in. E D SP, CSP 1/2 in. SP-110 thru 510 SP-710 & 780 SP-700, SP-900 thru 1550 SP-80, 80L-VG SP-110, 110L-VG C E D C E D C E D C E D Inlet FxG Dimensions for SP C D Outlet E Grille * SP-C50 7 1 2 7 1 2 3 5 8 3 1 5 8 9 1 4 x 9 SP-50, SP-70, SP-80, SP-90, SP-110, SP-150, SP-200 13 7 8 11 1 2 7 6 1 1 4 14 7 8 x 13 1 4 SP-50, SP-70, SP-90 13 1 4 10 5 8 9 6 6 14 7 8 x 13 1 4 SP-110, SP-125, SP-190 13 1 4 10 5 8 9 8 6 14 7 8 x 13 1 4 SP-200, SP-250, SP-290, SP-390 14 11 7 8 11 1 4 8 8 14 7 8 x 13 1 4 SP-410, SP-510 18 14 3 8 14 1 2 8 8 19 3 8 x 16 3 8 SP-700 23 5 8 11 5 8 11 5 8 19 1 2 8 25 1 8 x 13 1 2 SP-710, SP-780 18 14 3 8 14 1 2 10 8 19 3 8 x 16 3 8 SP-900, SP-1050, SP-1410, SP-1550 23 3 4 14 3 8 14 1 2 18 3 4 8 25 x 16 3 8 SP-80-VG, SP-80L-VG 10 1 2 11 3 4 7 5 8 6 8 1 2 13 x 13 3 4 SP-110-VG, SP-110L-VG 10 1 2 11 3 4 7 5 8 6 4 13 x 13 3 4 ll dimensions are in inches. * Grille dimensions are for the designer grille except on model SP-C50 where the dimensions are shown for the decorative grille and the SP-VG models where the dimensions are for the grille assembly. CSP-110-200 D (diameter) Dimensions for CSP C E CSP-110-510 G F E D C D E F G C CSP-700-3600 G F Inlet E D C 39 CSP-110, CSP-150, CSP-200 13 7 8 11 1 2 7 6 1 1 4 13 1 2 3 1 4 CSP-110, CSP-125, CSP-190 13 1 4 10 5 8 9 8 6 12 9 1 4 CSP-200, CSP-250, CSP-290, CSP-390 14 11 7 8 11 1 4 8 8 12 7 8 10 CSP-410, CSP-510 18 14 3 8 14 1 2 8 8 16 7 8 13 1 4 CSP-700 23 5 8 11 5 8 11 5 8 19 1 2 8 22 5 8 10 1 2 CSP-710, CSP-780 18 14 3 8 14 1 2 10 8 16 7 8 13 1 4 CSP-900, CSP-1050, CSP-1410, CSP-1550 23 3 4 14 3 8 14 1 2 18 3 4 8 22 5 8 13 1 4 CSP-1750, CSP-2150 35 14 3 4 14 3 4 28 6 32 3 4 13 CSP-3600 45 1 2 16 1 2 16 1 2 40 11 43 1 4 14 5 8 ll dimensions are in inches.

SP, CSP 40 Performance for SP Quick Energy Star RPM *mps *Watts Sones CFM / Static Pressure in inches wg uild In Stock @ 0 in. est Qualified 0.1.125.25.375.5.625.75 1 vailable SP-C50 1680 0.80 46.0 3.0 52 49 49 47 44 38 29 SP-C50-QD SP-50 625 0.50 37.8 1.2 67 54 51 40 29 SP-50-QD SP-70 675 0.53 45.1 1.2 77 71 68 57 49 39 SP-70-QD SP-80 900 0.60 54.3 2.0 87 80 78 68 61 54 44 30 SP-80-QD SP-90 700 0.65 49.7 1.5 101 89 88 75 59 45 30 SP-90-QD SP-110 950 1.14 80.2 1.5 133 114 110 97 95 94 91 85 51 SP-110-QD SP-150 1050 1.70 128 2.5 160 156 155 154 152 149 147 138 92 SP-150-QD SP-200 1100 2.20 172 3.5 197 195 194 191 187 184 181 166 128 SP-200-QD SP-50 700 0.31 18.3 0.5 76 51 48 31 SP-50-QD SP-70 850 0.27 20.2 0.8 83 70 67 42 SP-70-QD SP-90 900 0.34 29.4 0.8 99 88 84 61 25 SP-90-QD SP-110 950 0.58 48.7 0.8 119 110 106 88 SP-110-QD SP-125 1100 0.62 52.5 0.9 135 123 121 104 SP-125-QD SP-190 1400 1.30 113 2.5 216 197 192 167 133 SP-190-QD SP-200 900 0.43 48.2 1.4 247 225 220 196 172 142 105 67 SP-200-QD SP-250 1000 0.77 83.1 2.5 272 251 246 227 210 185 157 119 SP-250-QD SP-290 1050 0.72 80.7 2.5 315 293 287 257 231 207 175 124 SP-290-QD SP-390 1350 1.34 135 4.5 410 395 391 368 345 325 307 279 SP-390-QD SP-410 1000 1.74 121 3.5 443 413 405 351 306 SP-410-QD SP-510 1070 3.30 224 5.0 557 512 501 439 392 325 SP-510-QD SP-700 1100 3.20 350 5.0 757 730 723 700 679 649 613 560 396 SP-700-QD SP-710 1080 4.40 285 6.0 752 714 701 653 588 486 320 SP-710-QD SP-780 1600 3.30 348 8.5 812 782 775 741 704 665 625 581 SP-780-QD SP-900 950 4.00 285 4.0 955 907 896 841 773 701 SP-900-QD SP-1050 1095 6.30 420 6.0 1125 1059 1043 964 885 796 662 SP-1050-QD SP-1410 1450 7.40 786 10.0 1455 1415 1404 1353 1307 1262 1218 1174 SP-1410-QD SP-1550 1610 8.60 818 10.5 1607 1558 1558 1506 1449 1407 1369 1323 SP-1550-QD SP-80-VG 935 0.10 6.1 <0.3 80 80 80 80 78 64 37 SP-80-VG-QD SP-80L-VG 980 0.80 6.7 <0.3 80 80 80 79 79 70 37 SP-80L-VG-QD SP-110-VG 940 0.20 8.4 <0.3 110 110 110 109 100 62 28 SP-110-VG-QD SP-110L-VG 980 0.90 9.3 0.3 110 110 110 110 93 57 22 SP-110L-VG-QD *mp and watt draw are approximate and may vary based on motor manufacturer. Performance certified is for installation type : Free inlet, Ducted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft. (1.5 m) in a spherical free field calculated per nnex of MC 311. Values are for installation type : free inlet spherical sone levels. Ratings are based on 10 ft. of insulated duct. Products that earn the ENERGY STR prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the U.S. Environmental Protection gency and the U.S. Department of Energy. Fans that are ENERGY STR qualified include: SP-50, 70, 80 and 90 SP-50, 70, 90, 110, 125, 190, 200, 250, 290 and 410 SP-80, 80L, 110, 110L-VG

Performance for CSP Quick RPM *mps *Watts Sones CFM / Static Pressure in inches wg uild @ 0 in. est 0.125.25.375.5.75 1 vailable In Stock CSP-110 950 1.14 80.0 1.5 103 100 98 97 96 86 CSP-110-QD CSP-150 1050 1.70 129 2.0 151 149 148 144 146 135 CSP-150-QD CSP-200 1100 2.20 173 3.0 186 184 182 181 179 170 CSP-200-QD CSP-110 950 0.62 48.7 0.8 124 110 102 77 CSP-110-QD CSP-125 1100 0.63 52.5 1.1 138 124 114 91 CSP-125-QD CSP-190 1400 1.10 100 2.0 215 198 180 159 121 CSP-190-QD CSP-200 900 0.43 48.2 0.6 254 226 203 178 145 70 CSP-200-QD CSP-250 1000 0.79 82.7 0.9 266 241 221 205 187 132 CSP-250-QD CSP-290 1050 0.71 80.7 1.1 318 292 265 248 229 144 CSP-290-QD CSP-390 1350 1.33 140 2.0 412 397 382 363 339 309 CSP-390-QD CSP-410 1000 1.87 135 1.5 447 403 364 317 217 CSP-410-QD CSP-510 1070 3.11 217 2.5 545 506 464 405 324 CSP-510-QD CSP-700 1100 3.20 350 2.0 766 752 739 726 702 635 418 CSP-700-QD CSP-710 1080 4.40 325 2.5 737 688 635 567 475 CSP-710-QD CSP-780 1600 3.77 405 3.0 813 777 742 707 672 603 527 CSP-780-QD CSP-900 950 4.87 328 1.4 908 841 782 715 631 CSP-900-QD CSP-1050 1095 6.65 455 2.5 1182 1093 1013 922 832 CSP-1050-QD CSP-1410 1450 7.80 822 3.5 1584 1533 1483 1439 1395 1293 1181 CSP-1410-QD CSP-1550 1610 8.32 830 5.0 1672 1604 1543 1484 1427 1307 1172 CSP-1550-QD CSP-1750 1130 6.60 550 5.0 1842 1749 1619 1464 1284 772 CSP-2150 1100 7.80 735 5.0 2249 2156 2044 1900 1701 1114 CSP-3600 1100 7.10 1330 5.0 3778 3622 3460 3280 3091 2551 1750 *mp and watt draw are approximate and may vary based on motor manufacturer. Performance certified is for installation type D: Ducted inlet, Ducted outlet. Performance ratings include the effects of a backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft. (1.5 m) in a spherical free field calculated per nnex of MC 311. Values shown are for installation type D: ducted inlet spherical sone levels. Ratings do not include the effect of duct end correction. The MC Certified Ratings Seal applies to air performance only. 41 SP, CSP

Discharge ccessories for SP and CSP 42 Discharge ccessories for SP and CSP RJ-4 and RJ-6x9 RJ Pitched Roof Cap Steel construction with black enamel finish Integral flashing flange uilt-in birdscreen and damper RJ-4 E D For use with SP-C, SP-, SP- SP-VG CSP-, CSP- C50, 50-80 80, 80L C C D E Throat 11 9 1 4 8 1 4 5 5 16 4 1 2 4 in. dia. RJ-6 x 9 90-200 50-390 18 3 4 14 1 4 14 1 2 10 3 8 6 1 2 6 x 9 110, 110L RJ-10 x 10 410-1050 18 1 2 27 1 2 15 3 4 23 5 8 9 1 2 10 x 10 ll dimensions are in inches. WC Round Connection Hooded Wall Cap luminum construction - aluminum finish For outside wall applications uilt-in birdscreen (not available on WC-4) and damper For use with SP-C, SP-, SP- SP-VG CSP-, CSP- WL Wall Louvered Discharge RJ-10x10 nodized aluminum grille E uilt-in damper Not recommended for exterior applications exposed to severe weather conditions. n external wall louver is recommended for such applications. E C D E WC-4 C50 6 1 2 6 4 2 3 4 5 WC-6 50-200 50-190 8 8 6 4 1 8 5 80, 80L, 110, 110L WC-8 200-510 11 11 8 5 1 8 3 1 2 ll dimensions are in inches. WL-10 x 3 For use with SP-C, SP-, SP- SP-VG CSP-, CSP- C50 50-200 50-290 80, 80L, 110, 110L C E E C D E 12 5 1 4 10 7 3 4 3 1 2 WL-18 x 6 390-1550 19 3 4 8 18 9 6 ll dimensions are in inches. D C D D C VE rick Vent 3½ (89) 27 8 (73) 6½ (165) 5 1 8 (42) 10 (254) 3 3 8 (86) 5 8 (130) 11½ (292) EL-10x3 Elbow Discharge with Grille 93 8 (238) Designed for installation under roof eaves Painted steel louvered grille uilt-in damper For SP-C/SP-/SP-, sizes 50-290 For SP-80, 80L, 110, 110L-VG For CSP-/CSP-, sizes 110-290 WC Square/Rectangular Connections Hooded Wall Cap Steel construction with black enamel finish For outside wall applications uilt-in birdscreen and damper WC-10 x 3 Designed for installation in masonry walls nodized aluminum construction uilt-in aluminum mesh insect screen VE808 ll dimensions are in inches (millimeters). For use with SP-C, SP-, SP- SP-VG CSP-, CSP- C50 50-200 50-290 80, 80L, 110, 110L For use with SP-C, SP-, SP- SP-VG CSP-, CSP- C50 50-200 50-290 80, 80L, 110, 110L 8 C D E F G 5 1 2 12 3 4 3 1 2 10 1 4 11 1 8 4 1 4 5 WC-8 x 8 390-510 10 1 4 10 1 4 8 1 4 8 1 4 8 1 4 6 3 4 5 WC-18 x 8 700-1550 10 1 4 20 1 4 8 1 4 18 1 4 18 1 4 6 3 4 5 ll dimensions are in inches. C 8 1 8 7 3 4 4 VE128 390-510 12 7 3 4 4 VE157 700-1050 15 5 8 7 3 4 4 ll dimensions are in inches. C D G E F

Discharge ccessories for SP and CSP RCC-7 Weathertight aluminum construction Integral birdscreen uilt-in curb cap Requires roof curb RCC-7 Dia. D For use with SP-C, SP-, SP- SP-VG CSP-, CSP- Curb Cap C50 50-200 50-390 80, 80L, 110, 110L GRS ll aluminum exterior construction Galvanized steel internal supports Integral birdscreen uilt-in curb cap Requires roof curb C D Dia. 15 12 10 6 3 8 7 GRS-10 410-710 19 20 1 2 7 3 4 2 10 1 4 GRS-12 780-1050 22 29 10 3 1 2 12 1 4 GRS-16 1410-2150 26 29 11 4 1 4 16 5 16 GRS-20 3600 30 35 1 2 11 1 4 3 3 4 20 5 16 ll dimensions are in inches. C 1½ in. RDC Round Duct Connector Replaces the standard square discharge duct connector and damper. Uses existing mounting holes Galvanized steel construction RDC-6 includes a damper RDC-8 does not include a damper For use with SP-, CSP- Dia. RDC-6 110-190 6 RDC-8 200-510 8 ll dimensions are in inches. 473324 6x4 Transition Duct Reducer Reduces duct from 6 to 4 inches. Durable plastic construction For use with SP-, SP- CSP-, CSP- 50-200 473324 50-90 110-190* ll dimensions are in inches. *Used in conjunction with RDC-6 Dia. D 32 (157) (114) C 6 32 (157) 1¾ in. RDC-6 RDC-8 RFC-7 Weathertight aluminum construction Integral birdscreen uilt-in flashing flange RFC-7 C Dia. D Flashing Flange For use with SP-C, SP-, SP- SP-VG CSP-, CSP- C50 50-200 50-390 80, 80L, 110, 110L GRSF ll aluminum exterior construction Galvanized steel internal supports Integral birdscreen uilt-in flashing flange C D Dia. 18 12 10 6 3 8 7 GRSF-10 410-710 23 20 1 2 7 3 4 2 10 1 4 GRSF-12 780-1050 26 29 10 3 1 2 12 1 4 GRSF-16 1410-2150 30 29 11 4 1 4 16 5 16 GRSF-20 3600 34 35 1 2 11 1 4 3 3 4 20 5 16 ll dimensions are in inches. 30 20 10 9 8 7 6 5 4 3 2 Dia. ccessory Pressure Drops The chart below can be used with all of the discharge accessories shown on these two pages. Specific pressure drop values for these accessories must be included in total system calculations for proper fan selection. CFM x 100.01.02.03.04.05.06.07.08.09.10.2.3.4.5.6 1 Pressure Drop in Inches of Water Gauge bove accessories tested with 4 feet of inlet duct D C WL-18x6 RJ-10x10 VE-157 WC-18x8 VE-128 WC-8x8 WC-8 WC-10x3 WC-6 RJ-6x9 EL-10x3 WL-10x3 VE-808 RFC-7 RCC-7 43 Discharge ccessories for SP and CSP

Isolators, Ceiling Radiation Dampers, Filters, Grilles 44 Hanging Vibration Isolators Vibration isolator kits are available for suspended installations. Kits include all hardware necessary to mount one unit, with the exception of 1/4-20 threaded rod to be supplied by others. Fan mounting brackets include prepunched mounting holes for ease of installation. Ceiling Radiation Dampers Filters SP The Greenheck SP- and SP- ceiling radiation dampers are UL/ cul Classified, rated at three to four hours fire resistance, and are available on all SP- and SP- fans and fan/ light combinations. This design saves space by allowing the dampers to be mounted directly beneath the fan. Designer Grille Filter Stainless Steel or luminum Grille 50-200 4 1 2 15 5 8 50-190 5 1 2 14 5 8 200-390 6 3 4 15 1 2 410-510, 710-780 9 1 4 19 5 8 700 5 1 2 25 1 8 900-1050, 1410-1550 9 1 4 25 3 8 1750, 2150 9 1 4 36 3 4 3600 9 1 4 48 5 8 ll dimensions are in inches. Filter rea (ft 2 ) SP-50-200, 200-390 F-200 F-220 0.911 SP-50-190 F-200 F-210 0.739 SP-410-510 SP-710-780 Not F-250 1.518 vailable SP-900-1550 F-260 2.078 Mesh Filter SP Grille Resistance in w.c..12.10.08.06.04.02.00 1/4-20 hanging support rod by others SP CRD Length Width Height 50-190 310 13 1 2 11 1 8 3 50-200 200-390 320 14 3 8 12 1 4 3 410-510 710-780 350 18 7 16 14 15 16 3-700 700 24 3 16 12 1 4 3 900-1550 360 24 3 16 14 15 16 3 SP Part # Length Width Height 80, 80L, 110, 110L 453096 11 5 8 10 3 4 3 ll dimensions are in inches. Fans used in most applications, even where air is not excessively dirty, will collect airborne dirt on wheels and motors over time. ccumulations of dirt on the fan wheel will sharply reduce performance and cause imbalance. Dirt buildup on the motor can cause it to overheat. ll of these conditions will shorten the life of the fan. To help reduce this accumulation, washable aluminum mesh filters are available to Filter Loss Chart trap dirt before it enters the fan. These filters should be regularly cleaned to.24 maintain performance. The Filter Loss Chart shows the effect the filter will.22 have on performance. To determine the added resistance, divide the desired.20 cfm by the filter area (ft 2 ). This will give FPM. Use this with the filter loss chart.18 to determine the added resistance..16 In addition to reducing dirt accumulations on the motor and wheel, filters also.14 reduce sound levels. 0 1 2 3 4 5 6 7 8 9 Velocity FPM x 100 Grilles for SP Designer Standard on 50-200, 50-390 White polystyrene finish. With or without motion detector or time delay. Decorative Optional on 50-200, 50-390 White plastic finish, with or without light, motion detector or time delay. Lighted grille optional with prismatic or frosted lens. Stainless Steel Optional on 50-200, 50-390 Polished stainless steel finish. luminum Standard on 410-1550 Optional on 50-200, 50-390 White enamel finish.

1 2 3 4 6 5 1 6 6 14 13 12 10 11 6 7 7 9 1 8 15 8 school support Complete, cost-effective air systems. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Energy Recovery Ventilator Roof Upblast Louvered Gravity Ventilator Equipment Screen Laboratory Exhaust System Spun luminum Roof Exhaust Hooded Gravity Ventilator Centrifugal Inline Fan Ceiling Exhaust Fan Louver Intake Damper Utility Fan Make-Up ir Unit Upblast Roof Exhaust Kitchen Hood School air control needs are complex and interrelated. When you equip for all applications classrooms, labs, kitchen, cafeteria, pool, auditorium, gym mixing and matching HVC brands is not a value proposition. Greenheck products are designed to work together in complete, integrated systems that deliver value quick, cost-saving installation; energy efficiency; quiet operation; comfort for staff and students; and results that school boards love. Our extensive testing ensures that you can select more products with certifications from MC, UL, ETL, HRI and CS than from any other manufacturer. Engineering expertise and industry knowledge deliver value you can depend on, every school day. Contact your Greenheck representative today. Learn more at greenheck.com/4schools Fans & Ventilators Centrifugal & Vane xial Fans Energy Recovery Ventilators Packaged Ventilation Systems Make-up ir Units Kitchen Ventilation Systems Dampers Louvers Lab Exhaust Systems Coils 715.359.6171 greenheck.com Scan code to learn more about school system ventilation.

CF, DF 46 est vailable Program 3 Days CF UL/cUL 705 Power Ventilators E40001 - CF with TEFC motors E40001 - DF with TEFC motors DF Greenheck Fan Corporation certifies that the CF shown herein is licensed to bear the MC seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and comply with the requirements of the MC Certified Ratings Program. Greenheck Fan Corporation certifies that the DF shown herein is licensed to bear the MC seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and Publication 311 and comply with the requirements of the MC Certified Ratings Program. CF and DF elt Drive Centrifugal duct fans are designed for clean air inline exhaust or supply applications. Standard Construction CF DF Housing - galvanized steel Housing - low profile Housing - square Drive frame secured to housing Wheel - forward-curved, galvanized steel Motor and scroll - mounted to drive frame ccess door - bolted, removable (CF-108/208 and larger, all DF) ccess door - hinged (CF-106, 107, 206 and 207) Corrosion-resistant fasteners NEM-1 disconnect switch all bearing motor - 1/4 hp and larger Double-studded vibration isolators Flanges - inlet and outlet djustable motor pulley Options and ccessories CF DF Damper Isolators Insulation Filter box* - filters are throwaway (pleated) or permanent (aluminum mesh) Mixing box NEM rated disconnect switch Dual drives Multiple discharge positions* Decorative or protective powder coating UL/cUL Listed Power Ventilators *see page 53 for additional information D INLET OPENING F C C 2 in. E 1 in. E W DMPER OUTLET OPENING H 1 in. Dimensions for CF Top horizontal discharge C E F 106 20 23 1 4 11 12 6 107 23 29 13 15 8 108 26 32 16 18 10 110 32 36 19 24 12 112 36 42 23 28 14 206 34 23 1 4 11 26 6 207 38 29 13 30 8 208 44 32 16 36 10 210 48 36 19 40 12 212 58 42 23 50 14 ll dimensions are in inches. Dimensions for DF ottom horizontal discharge C Damper Outlet Opening (W x H) Inlet Opening (D x E) 80 23 1 4 18 1 2 15 7 8 9 3 4 x 8 7 8 15 3 16 x 12 11 16 90 24 1 4 21 1 4 18 3 4 12 1 4 x 10 1 2 18 1 4 x 15 7 8 100 26 1 4 22 3 4 20 3 4 13 3 4 x 11 7 8 19 3 4 x 17 7 8 120 33 27 1 4 22 3 4 16 x 13 3 8 24 1 8 x 19 7 8 150 34 3 4 32 5 8 27 3 4 19 1 8 x 16 3 8 28 5 8 x 23 7 8 180 40 1 4 41 3 4 31 3 4 22 1 2 x 18 7 8 37 1 2 x 27 7 8 200 50 1 4 49 1 4 39 3 4 23 1 8 x 25 1 4 45 1 8 x 36 ll dimensions are in inches. www.greenheck.com Centrifugal Inline Fans For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

Performance for CF 106 107 108 110 112 206 207 208 210 212 CFM RPM / Static Pressure in inches wg Max Sones Quick uild.125.25.375.5.625.75 1 1.25 1.5 1.75 HP @.25 est vailable 230 834 1036 1219 1392 1547 1687 0.05 4.9 410 1202 1335 1465 1586 1701 1811 2024 2219 2416 2599 0.22 6.2 590 1635 1724 1815 1908 2000 2089 2259 2420 0.28 8.4 3 Days 770 2086 2153 2223 0.34 11.1 360 596 726 851 0.05 5.0 630 882 962 1038 1111 1188 1260 1411 0.22 6.8 900 1201 1258 1313 1369 1423 1476 1577 1686 1787 1597 0.59 9.2 3 Days 1170 1531 1575 1619 1662 1703 1747 1832 0.76 12.3 890 651 748 840 924 1008 1084 1223 0.27 5.2 1250 848 916 985 1054 1121 1185 1305 1423 1531 1630 0.67 6.8 1610 1057 1110 1164 1217 1270 1324 1429 0.72 9.3 3 Days 1850 1200 1247 1292 1339 0.78 11.0 1140 586 671 750 819 882 941 1053 1151 0.36 6.4 1700 817 863 916 975 1031 1084 1181 1269 1349 1430 0.84 8.8 1980 941 976 1017 1063 1113 1164 1257 1342 1420 1494 1.08 10.4 3 Days 2260 1066 1092 1128 1163 1204 1248 1.00 12.5 1410 543 608 667 720 770 821 915 1004 1088 1166 0.65 9.9 2130 760 808 852 895 937 976 1049 1118 1183 1251 1.13 13.7 2850 990 1025 1061 1095 1128 1161 1224 1284 1.66 19.4 3 Days 3330 1146 1176 1206 1237 1266 1.95 24 740 1128 1285 1416 1533 1639 1747 0.22 8.0 950 1362 1494 1616 1725 1823 1915 2084 2252 2407 0.48 8.8 1160 1612 1719 1826 1927 2023 2110 0.51 10.4 3 Days 1300 1783 1877 1972 0.49 11.8 760 623 742 867 0.09 6.2 1210 858 946 1028 1103 1176 1257 1411 0.38 8.5 1660 1116 1185 1250 1313 1373 1430 1539 1649 1763 1875 0.93 11.6 3 Days 2260 1474 1527 1.03 16.7 1150 541 669 0.10 6.0 1840 721 817 903 984 1061 1132 0.55 9.7 2530 929 1000 1071 1138 1201 1261 1377 1489 1592 1.30 11.5 3 Days 3450 1222 1274 1326 1379 1430 1.53 16.1 1660 501 590 676 755 0.23 6.1 2485 665 734 796 854 915 972 1077 1188 0.87 11.1 3310 839 898 950 999 1046 1091 1179 1267 1351 1429 1.67 13.4 3 Days 4410 1078 1128 1174 1215 1253 1291 2.05 17.7 2810 549 608 665 718 767 813 902 994 1077 1.22 8.2 3950 729 773 814 857 899 938 1012 1082 1148 1209 2.12 12.2 5090 916 950 985 1018 1049 1082 1148 1210 1269 1324 3.27 17.3 3 Days 5850 1043 1073 1103 1133 1162 1189 3.05 21 Performance certified is for installation type D: Ducted inlet, Ducted outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The MC Certified Ratings Seal applies to air performance only. Performance for DF 80 90 100 120 150 180 CFM RPM / Static Pressure in inches wg Max Sones Quick uild.125.25.375.5.75 1 1.5 2 2.5 3 HP @.25 est vailable 400 546 717 0.03 4.7 700 772 857 949 1051 1244 0.15 6.4 1000 1024 1100 1165 1220 1348 1490 1762 0.50 9.4 1300 1287 1351 1409 0.50 14.0 800 465 584 689 0.09 4.1 1140 569 660 748 827 975 0.26 6.0 1820 805 874 934 991 1106 1213 1409 1.00 11.2 2500 1077 1112 1.02 17.4 1000 413 521 615 0.12 5.0 1400 498 581 660 735 869 0.33 6.1 2000 666 710 768 826 937 1041 1231 1.05 9.9 2600 851 872 907 948 0.99 14.7 1600 370 456 535 604 726 0.37 6.3 2500 504 554 608 666 771 866 1033 1.33 9.6 3400 677 689 721 766 847 930 1.44 14.8 4000 796 802 814 1.54 18.6 2500 374 406 457 517 0.42 7.0 3160 449 483 508 544 637 714 1.00 9.7 4480 611 637 664 685 720 770 902 1010 3.15 16.5 5800 780 797 816 2.91 24 5080 358 400 439 479 553 621 738 2.19 10.8 6700 450 480 513 544 603 662 770 868 954 4.85 17.9 8320 546 570 594 621 671 717 814 5.00 21 9400 612 632 654 675 722 5.00 24 6000 304 340 377 413 480 538 1.77 13.1 9000 425 449 473 498 546 596 689 770 846 7.11 17.6 200 3 Days 12000 553 571 589 607 644 680 754 827 896 961 11.92 25 15000 682 697 712 726 756 783 843 899 14.90 35 Performance certified is for installation type D: Ducted inlet, Ducted outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) from the test inlet duct in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type D: ducted inlet, ducted outlet. Ratings do not include the effects of duct end correction. 3 Days 3 Days 3 Days 3 Days 3 Days 3 Days 47 CF, DF

SQ, SQ 48 UL/cUL 705 Power Ventilators E40001 - SQ and SQ Greenheck Fan Corporation certifies that the SQ and SQ shown herein are licensed to bear the MC seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and MC Publication 311 and comply with the requirements of the MC Certified Ratings Program. SQ-75 through 120 and 140 SQ-70 through 120, 140 through 180 and 240 SQ-60 through 70, 130 and 160 SQ-130 and 200 High Pressure SQ-130HP through 240HP SQ-300 through 420 High Pressure SQ-300HP and 360HP C SQ SQ SQ UL/cUL Listed 705 is standard on In Stock models. est vailable Program In Stock 3 Days SQ C SQ Direct Drive and SQ elt Drive Centrifugal inline fans are designed for clean air exhaust or supply applications. Standard Construction Select sizes and models with the Vari-Green motor are available in stock. Dimensions for SQ, SQ D* SQ SQ Housing - galvanized Wheel - backward-inclined, aluminum ccess panel - bolted, removable Corrosion-resistant fasteners NEM-1 disconnect switch all bearing motor - 1/4 hp and larger Three speed motor - sizes 60 through 95 djustable motor plate Flanges - inlet and outlet djustable motor pulley Options and ccessories Stock SQ SQ Sq. C D* SQ-60-75 13 12 8 7 8 SQ-80-95 16 15 11 7 8 SQ-70-90 21 15 11 7 8 12 1 2 SQ/SQ-100 21 17 13 7 8 12 1 2 SQ/SQ-120 21 19 15 7 8 12 1 2 SQ/SQ-130 21 21 17 7 8 12 1 2 SQ/SQ-140 22 23 19 7 8 12 1 2 SQ/SQ-160 26 26 22 7 8 13 3 8 SQ-180 28 28 23 7 8 13 3 4 SQ-200 32 32 27 7 8 16 SQ-240 34 39 34 7 8 19 SQ-300 38 46 41 7 8 18 SQ-360 42 52 47 7 8 18 SQ-420 50 58 53 7 8 18 ll dimensions are in inches. *Dimension may be greater depending on motor Vari-Green motor - 80% turndown, 85% efficient vailable as standard on select sizes Damper luminum housing Motor cover Guards - inlet, outlet Speed control Isolators - external Insulation - housing and motor cover Filter box* - slide out NEM rated disconnect switch Dual drives Relubricatable bearings Multiple discharge positions* Decorative or protective powder coating Certified for seismic applications UL/cUL Listed Power Ventilators *see page 53 for additional information www.greenheck.com Centrifugal Inline Fans For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

Performance for SQ 60 65 70 75 80 85 90 95 100 120 130 140 CFM / Static Pressure in inches wg Max Quick uild Motor Max Sones Fan HP hp @.125 est 0.125.25.375.5.625.75 1 1.5 RPM vailable In Stock 126 63 1/140 1050.007 1.8 156 109 37 1/80 1300.013 2.5 186 145 105 31 1/40 1550.022 4.0 207 170 136 85 1/6 1725.030 5.0 154 79 1/100 1050.009 1.9 191 137 52 1/50 1300.017 2.9 228 184 128 46 1/30 1550.028 4.0 254 216 170 111 1/6 1725.040 5.7 212 118 1/100 1050.009 1.5 262 190 77 1/50 1300.018 3.3 313 252 189 67 1/30 1550.030 5.1 348 295 240 171 1/6 1725.040 6.6 241 146 1/100 1050.011 2.8 298 224 133 1/50 1300.021 3.7 SQ-75-DGEX-QD 356 294 229 137 1/30 1550.035 5.4 396 341 285 223 1/6 1725.050 8.0 306 225 104 1/40 1050.017 3.6 378 312 244 140 1/20 1300.032 5.4 SQ-80-DGEX-QD 451 394 342 280 201 1/12 1550.055 7.3 503 451 405 350 294 219 1/6 1725.080 8.5 SQ-80-VG6X-QD 357 272 142 1/40 1050.018 3.9 442 377 298 185 1/20 1300.034 5.3 SQ-85-DGEX-QD 528 474 413 343 254 1/12 1550.057 7.4 588 540 488 429 362 1/6 1725.080 8.6 500 369 188 1/50 1050.021 3.9 619 519 397 245 1/25 1300.040 5.4 SQ-90-DGEX-QD 738 654 564 457 334 1/10 1550.068 7.5 821 748 669 579 481 366 1/6 1725.090 8.8 SQ-90-VG6X-QD 623 475 274 1/30 1050.031 4.5 771 659 522 352 1/15 1300.059 6.7 SQ-95-DGEX-QD 919 829 720 603 461 276 1/8 1550.100 9.3 1024 948 850 751 641 507 1/6 1725.140 11.0 725 611 1/8 860.030 3.7 961 881 785 657 1/6 1140.071 6.5 SQ-100-X-QD 1454 1402 1349 1292 1227 1156 1077 830 1/4 1725.250 12.4 SQ-100-VG4X-QD 971 843 704 1/8 860.059 4.1 1287 1189 1094 992 873 692 1/6 1140.140 7.2 1948 1883 1818 1754 1692 1628 1562 1416 1/2 1725.480 14.1 SQ-120-VG5X-QD 1180 1048 890 1/8 860.078 5.2 1564 1471 1366 1248 1104 865 1/4 1140.180 8.3 2368 2307 2247 2174 2105 2038 1961 1791 3/4 1725.630 17.6 1637 1487 1316 1033 1/8 860.130 6.2 2170 2061 1942 1818 1666 1446 1121 1/3 1140.300 10.5 2855 2772 2690 2598 2506 2412 2307 2029 3/4 1500.680 15.6 SQ-140-VG7X-QD 3283 3212 3139 3065 2985 2905 2825 2645 2085 1 1725 1.03 19.7 2506 2334 2147 1913 1605 1/4 860.240 7.7 3322 3194 3061 2922 2773 2587 2388 1808 1/2 1140.560 13.4 160 3788 3600 3562 3415 3320 3198 3033 2685 1 1300.840 15.0 5027 4942 4856 4772 4683 4596 4504 4312 3845 2 1725 1.95 25 Performance certified is for installation type : Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : free inlet hemispherical sone levels. 49 SQ, SQ

SQ, SQ 50 Performance for SQ 70 80 90 CFM / Static Pressure in inches wg Motor HP Max Fan RPM Max hp Sones @.25.125.25.5.75 1 1.25 1.5 1.75 2 405 384 331 273 212 142 1/4 1972 0.26 19.1 450 431 387 335 282 224 161 1/3 2172 0.35 21 521 504 468 426 380 334 287 232 176 1/2 2486 0.52 25 720 687 613 524 424 1/4 1833 0.26 16.9 799 769 704 630 545 452 269 1/3 2018 0.35 19.5 924 897 842 784 716 643 563 445 1/2 2310 0.52 23 1065 1041 995 945 894 835 773 705 635 3/4 2645 0.79 28 965 914 798 654 437 1/4 1694 0.26 15.8 1072 1028 926 808 657 1/3 1866 0.35 17.3 1239 1202 1118 1024 917 789 638 1/2 2136 0.52 21 1429 1396 1326 1249 1167 1073 976 844 707 3/4 2445 0.79 25 1579 1549 1488 1420 1347 1271 1186 1097 987 1 2691 1.05 28 Quick uild est vailable In Stock SQ-70-4X-QD SQ-80-4X-QD SQ-90-4X-QD 1265 1207 1088 917 1/4 1609 0.26 15.0 1405 1352 1247 1110 939 1/3 1772 0.35 16.4 100 1623 1577 1484 1396 1262 1119 1/2 2029 0.52 19.6 SQ-100-LMDX-QD 1871 1830 1749 1668 1591 1472 1358 1197 3/4 2323 0.79 23 2066 2029 1956 1882 1810 1734 1626 1522 1402 1 2556 1.05 26 1471 1392 1226 1020 1/4 1367 0.26 11.0 1636 1564 1418 1252 1027 1/3 1506 0.35 12.5 120 1892 1830 1703 1571 1423 1241 1/2 1724 0.52 15.7 2183 2129 2020 1908 1791 1663 1518 1307 3/4 1974 0.78 19.1 SQ-120-LMDX-QD 2413 2364 2264 2164 2062 1953 1836 1712 1553 1 2172 1.05 23 2779 2737 2651 2563 2475 2387 2294 2198 2093 1 1 2 2490 1.58 30 1652 1563 1328 958 1/4 1293 0.26 11.6 1838 1754 1568 1299 1/3 1424 0.35 13.3 130 2126 2050 1908 1714 1468 1121 1/2 1630 0.52 15.6 2448 2389 2266 2128 1949 1740 1462 3/4 1866 0.78 19.5 2702 2655 2537 2426 2286 2117 1926 1686 1319 1 2053 1.05 22 3112 3074 2971 2877 2777 2659 2514 2359 2189 1 1 2 2355 1.58 28 1927 1810 1538 1/4 1076 0.26 10.7 2142 2039 1807 1463 1/3 1185 0.35 11.9 2476 2392 2197 1979 1636 1/2 1356 0.52 13.9 140 2858 2787 2626 2449 2253 1964 1447 3/4 1553 0.79 16.0 SQ-140-LMDX-QD 3159 3094 2953 2798 2635 2451 2177 1752 1 1709 1.05 18.0 3633 3576 3461 3330 3193 3050 2894 2705 2457 1 1 2 1956 1.57 23 4009 3958 3856 3741 3622 3494 3365 3225 3078 2 2153 2.10 30 2373 2209 1759 1/4 873 0.26 8.6 2643 2504 2150 1/3 962 0.35 9.6 3061 2944 2665 2301 1/2 1101 0.52 12.1 160 3538 3436 3212 2946 2611 2071 3/4 1261 0.78 15.1 3911 3818 3628 3402 3146 2815 2311 1 1387 1.04 17.5 SQ-160-LMDX-QD 4503 4422 4259 4079 3880 3656 3389 3055 2566 1 1 2 1588 1.56 22 4973 4899 4751 4603 4425 4240 4037 3802 3528 2 1748 2.09 27 5713 5648 5519 5390 5260 5103 4946 4774 4596 3 2001 3.14 38 3051 2845 2217 1/3 791 0.35 10.9 3546 3366 2928 2175 1/2 905 0.52 12.1 4109 3955 3616 3179 2432 3/4 1037 0.79 14.2 180 4549 4412 4127 3760 3290 2523 1 1141 1.04 16.1 SQ-180-LMDX-QD 5242 5128 4878 4610 4281 3884 3332 1 1 2 1306 1.57 19.5 5790 5686 5463 5236 4964 4662 4298 3814 3106 2 1437 2.09 22 6656 6566 6377 6179 5981 5744 5485 5216 4866 3 1645 3.14 28 3315 3018 2042 1/3 660 0.34 11.2 3867 3624 3036 1/2 756 0.52 12.0 4484 4285 3812 3239 3/4 865 0.79 13.7 200 4972 4796 4391 3916 3203 1 952 1.05 15.5 5741 5587 5253 4874 4452 3878 1 1 2 1090 1.56 18.9 6350 6210 5920 5597 5233 4836 4316 2 1200 2.09 22 7314 7192 6948 6677 6396 6076 5753 5379 4862 3 1375 3.15 27 Performance certified is for installation type : Free inlet, Ducted outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : free inlet hemispherical sone levels.

Performance for SQ Quick CFM / Static Pressure in inches wg Max Motor Max Sones uild Fan HP hp @.25 est.125.25.5.75 1 1.25 1.5 1.75 2 RPM vailable In Stock 5269 4833 3685 1/2 569 0.51 11.8 6132 5768 4946 3/4 651 0.78 13.9 6816 6498 5782 4884 1 717 1.03 15.9 240 7935 7680 7086 6425 5604 1 1 2 826 1.59 19.5 SQ-240-LMDX-QD 8720 8488 7960 7384 6756 5889 2 903 2.09 22 10048 9845 9409 8936 8421 7881 7219 6268 3 1034 3.14 27 11973 11802 11460 11070 10671 10245 9804 9345 8797 5 1225 5.22 40 7693 7033 4827 3/4 449 0.78 11.6 8598 7982 6450 1 494 1.04 13.8 10022 9469 8363 6662 1 1 2 566 1.57 16.6 300 11129 10636 9676 8418 2 623 2.09 19.0 3 Days 12862 12446 11588 10703 9547 7803 3 713 3.13 23 15380 15041 14307 13604 12860 11957 10839 9309 5 845 5.23 27 17693 17396 16776 16124 15526 14888 14171 13273 12242 7 1 2 967 7.85 33 10039 9008 1 376 1.04 12.5 11720 10872 8980 1 1 2 431 1.55 14.7 13018 12323 10736 8489 2 474 2.09 16.6 360 15081 14544 13112 11627 9553 3 543 3.12 19.6 3 Days 18041 17587 16511 15327 14081 12560 5 643 5.19 27 20802 20407 19615 18505 17515 16475 15153 13704 7 1 2 737 7.84 31 22967 22607 21888 21011 19986 19146 18195 16996 15786 10 811 10.45 34 15275 14340 12132 2 389 2.09 12.3 17704 16910 15188 12941 3 445 3.12 19.5 420 21244 20625 19231 17747 15850 13154 5 528 5.24 24 3 Days 24459 23950 22762 21502 20206 18533 16581 7 1 2 604 7.84 30 27237 26778 25749 24660 23491 22322 20793 19111 16873 10 670 10.71 37 Performance certified is for installation type : Free inlet, Ducted outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : free inlet hemispherical sone levels. 51 SQ, SQ SQ and SQ Options and ccessories Hanging Vibration Isolator - HVI (Hanging rods supplied by others) ackdraft Damper WD-330 Inlet Guard ase Vibration Isolator VI Motor Cover

SQ, SQ 52 Performance for High Pressure SQ CFM / Static Pressure in inches wg Max Motor Max Sones Quick uild Fan.5.75 1 1.25 1.5 1.75 2 2.5 3 HP hp @.5 RPM est vailable 1014 884 670 1/4 1520 0.26 11.4 1161 1048 930 700 1/3 1674 0.35 12.4 130HP 1380 1294 1192 1091 925 680 1/2 1916 0.52 14.6 1621 1555 1477 1388 1297 1203 1033 3/4 2194 0.78 19.2 1808 1749 1685 1614 1532 1448 1369 1080 1 2414 1.04 22 2108 2056 2005 1950 1888 1825 1750 1608 1421 1 1 2 2770 1.56 27 1449 1281 1058 1/3 1453 0.35 13.3 1742 1607 1456 1264 800 1/2 1664 0.52 16.5 140HP 2057 1954 1832 1701 1548 1363 3/4 1905 0.79 19.7 2298 2211 2108 1998 1878 1741 1581 1 2096 1.05 24 2676 2603 2525 2437 2339 2244 2134 1882 1381 1 1 2 2399 1.57 30 2973 2907 2841 2768 2688 2599 2512 2319 2088 2 2641 2.10 33 1844 1533 1/3 1116 0.35 8.6 2237 2020 1731 1305 1/2 1277 0.52 10.8 2664 2497 2299 2050 1720 3/4 1462 0.79 14.1 160HP 2986 2845 2688 2497 2269 1993 1601 1 1609 1.05 17.8 3488 3377 3248 3115 2954 2773 2570 2013 1 1 2 1842 1.56 25 3881 3780 3676 3555 3434 3290 3135 2763 2248 2 2027 2.09 28 4499 4411 4322 4234 4129 4024 3918 3660 3351 3 2321 3.14 36 2636 2364 1984 1/2 1083 0.57 12.1 3169 2964 2724 2406 1945 3/4 1249 0.87 14.7 180HP 3428 3247 3032 2782 2458 1513 1 1332 1.06 16.3 3931 3782 3614 3423 3212 2944 2622 1 1 2 1498 1.51 19.9 4425 4298 4158 4003 3833 3648 3429 2859 2 1664 2.07 24 5155 5050 4938 4816 4691 4545 4396 4058 3620 3 1913 3.14 33 2724 2258 1/2 880 0.52 12.8 3327 3003 2556 3/4 1009 0.78 15.6 200HP 3787 3495 3179 2732 1 1111 1.05 16.9 4466 4235 3979 3716 3379 2808 1 1 2 1271 1.57 18.8 4998 4803 4578 4344 4108 3802 3409 2 1399 2.09 21 5823 5659 5489 5291 5089 4883 4669 4089 2894 3 1602 3.15 26 4643 4149 3492 1 820 1.04 15.2 5552 5159 4721 4161 1 1 2 939 1.57 18.1 240HP 6251 5909 5533 5128 4609 3727 2 1033 2.09 20 7336 7046 6747 6419 6073 5714 5209 3 1183 3.13 25 8848 8657 8405 8152 7897 7614 7327 6721 5790 5 1402 5.24 33 10232 10066 9896 9675 9455 9234 9007 8512 7987 7 1 2 1605 7.84 43 6610 6001 5168 3452 1 1 2 694 1.53 16.5 7641 7151 6556 5799 4740 2 777 2.15 19.3 300HP 9492 9142 8746 8281 7752 7130 6393 3 934 3.74 26 3 Days 11297 11010 10710 10371 10006 9601 9149 8055 6257 5 1091 5.95 29 12489 12228 11966 11681 11372 11047 10677 9853 8840 7 1 2 1196 7.85 30 7012 6115 4672 1 1 2 545 1.55 17.6 8000 7272 6410 4868 2 600 2.09 18.4 360HP 9463 8955 8277 7528 6453 4479 3 687 3.12 19.5 11576 11150 10740 10198 9593 8954 8138 4978 5 815 5.20 21 3 Days 13487 13108 12740 12382 11939 11443 10909 9748 7674 7 1 2 933 7.86 27 14975 14631 14286 13957 13631 13240 12806 11838 10796 10 1026 10.46 33 Performance certified is for installation type : Free inlet, Ducted outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : free inlet hemispherical sone levels. Side Discharge The side discharge option provides several advantages from removing a system effect problem, to increasing performance and even reducing installation labor. The most notable is reducing system effect. Refer to Figure 1. It shows the air being discharged into the corner. It will take several duct lengths before the airflow becomes laminar or smooth again after making the turn. In Figure 2, the fan is placed in the corner using a side discharge. In this configuration the airflow pattern at discharge is smooth and supports a more predictable system. Remember the duct length on the discharge side should be approximately two to three wheel diameters to achieve catalog performance. Fan Figure 1 Fan Figure 2

Multiple Discharge Positions CF fans are available with either top horizontal or upblast discharge positions. DF fans have been designed for horizontal mounting and are standard with a bottom horizontal discharge. Optional top horizontal discharge is also available. SQ and SQ fans are available with right side discharge, left side discharge, inline discharge positions, or a combination of right, left and inline positions. Filter ox Filter boxes incorporate a V-bank design constructed of galvanized steel. Filters are available in 1 or 2 inch throwaway (pleated) or permanent (washable aluminum mesh). Side access panels are standard for easy maintenance. DF CF Discharge Positions Top Horizontal Upblast Fan ccess Panel DF Discharge Positions ottom Horizontal Top Horizontal SQ and SQ Discharge Positions Right Side Left Side Inline Combination ll dimensions are in inches. The K dimension equals the length of fan and filter box combined. K Filter ox ccess Panel K Filter No. of Filters 80 49 3 4 16 x 20 2 90 54 7 8 20 x 25 2 100 51 7 8 20 x 20 2 120 63 9 16 12 x 25 4 150 62 1 16 16 x 20 8 180 75 3 8 20 x 25 6 200 85 1 4 16 x 25 12 53 Discharge Positions, Filter ox, Insulated Housing Slanted Filter CF K Mixing ox Filter ox Fan Filter No. of Filters Single Double K Single Double Single Double Fan Fan Fan Fan Fan Fan 106 206 45 1 2 16 x 20 20 x 20 1 1 107 207 52 16 x 20 16 x 20 1 2 108 208 56 16 x 20 16 x 20 2 4 110 210 61 20 x 20 20 x 20 2 4 112 212 65 16 x 20 20 x 25 4 4 For slide-out filter box information, refer to CF catalog. Double V-ank Filter luminum Mesh Filter SQ, SQ SQ K Filter No. of Filters 60-75 22 1 8 10 x 12 1 80-95 45 5 8 14 x 25 1 100 47 1 4 16 x 20 2 120 52 3 16 16 x 25 2 130 46 3 8 20 x 20 2 140 52 3 8 20 x 25 2 160 51 3 8 20 x 20 4 K SQ K Filter No. of Filters 70-80 - 90 50 5 8 14 x 25 1 100 47 1 4 16 x 20 2 120 52 3 16 16 x 25 2 130-130HP 46 3 8 20 x 20 2 140-140HP 52 3 8 20 x 25 2 160-160HP 51 3 8 20 x 20 4 180-180HP 55 1 16 20 x 25 4 200-200HP 66 11 16 12 x 25 3 16 x 25 3 240-240HP 68 7 8 20 x 25 4 16 x 25 4 300-300HP 72 1 8 20 x 25 8 360-360HP 79 1 4 16 x 25 10 20 x 25 5 420 93 1 8 16 x 25 5 20 x 25 10 Insulated Housing The interior of the fan housing and filter box can be lined with a fiberglass duct liner for noise reduction and condensation control. The duct liner can be utilized to reduce radiated noise from inline fan housings. It is recommended for applications when fans are placed in acoustically sensitive locations. The duct liner also reduces the noise radiating from the inlet and outlet of the fan.

TC 54 UL/cUL 705 Power Ventilators E40001 - TC UL 762 Power Ventilators for Restaurant Exhaust ppliances - MH11745 - TC Construction Standard With UL 762 Greenheck Fan Corporation certifies that the TC shown herein is licensed to bear the MC seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and Publication 311 and comply with the requirements of the MC Certified Ratings Program. est vailable Program 15 Days TC elt Drive Tubular centrifugal inline fans are the ideal choice for installations with straight-through airflow in ducted systems. The centrifugal wheels used in this design provide higher efficiencies and lower sound levels than axial type inline fans when used in medium pressure ducted systems. These fans can be mounted in any position from horizontal to vertical, allowing installation in the smallest possible space at the lowest installation cost. lso available in roof supply and roof exhaust configurations. Performance Capacities range from 360 to 24,000 cfm and up to 4.5 in. wg of static pressure. Standard Construction Housing - continuously welded, steel Wheel - backward-inclined, aluminum Flanges - inlet and outlet with mounting holes luminum rub ring Options and ccessories ll aluminum construction Motor cover elt guard Guards - inlet, outlet Companion flanges - inlet, outlet Inlet vane damper Isolators - base, hanging Easy access construction - bolted Inspection door - bolted, hinged Minimum bearing life of L 10 80,000 hours (verage life - L 50 400,000 hours) Spark resistant construction Extended lube lines Permatector protective powder coating Inspection section with removable access panel NEM rated disconnect switch Dual drives Mounting rails Decorative or protective powder coating UL/cUL Listed Power Ventilators UL Listed Power Ventilators for Restaurant Exhaust ppliances D* Maximum with Motor Cover H C E Dimensions for TC C D* E H 9 23 21 5 8 13 1 4 21 3 4 17 5 8 18 3 8 10 23 21 5 8 13 1 4 21 3 4 17 5 8 18 3 8 12 23 21 5 8 13 1 4 21 3 4 17 5 8 18 3 8 13 24 1 2 23 5 8 13 7 8 23 1 4 19 20 3 8 16 28 1 2 27 5 8 16 1 8 26 21 7 8 24 3 8 18 31 33 5 8 18 3 8 29 1 4 26 1 8 30 3 8 22 35 1 2 39 5 8 22 1 2 33 3 4 30 1 2 36 3 8 24 42 45 3 4 24 5 8 37 1 4 34 3 4 42 1 2 30 48 1 2 52 3 4 29 1 2 42 3 4 42 48 1 2 36 54 59 1 4 31 3 4 47 1 4 46 3 4 55 ll dimensions are in inches. *Dimension may vary depending on motor. www.greenheck.com Tubular Centrifugal Fans For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

Performance for TC Level CFM Sones @.125 RPM / Static Pressure in inches wg Quick uild.125.25.5 1 2 3 4 est vailable 360 5.3 846 999 1260 1 840 11.0 1688 1752 1882 2142 2629 9 560 8.6 1379 1480 1686 2059 2671 2 1040 18.0 2431 2482 2590 2810 3251 3648 4027 480 4.9 858 1011 1253 1 960 9.7 1441 1541 1716 2023 2506 10 700 8.3 1359 1453 1630 1966 2560 2 1500 18.4 2754 2797 2883 3063 3398 3721 4026 700 6.2 853 958 1158 1518 1 1600 13.4 1729 1781 1886 2084 2436 12 900 5.8 1009 1119 1315 1648 2182 2 1650 13.6 1715 1767 1887 2127 2534 2903 3233 600 4.1 660 792 1019 1 1800 11.2 1552 1613 1729 1935 2293 13 1200 5.6 964 1048 1206 1479 1961 2 2000 12.8 1510 1565 1669 1868 2217 2531 2836 1000 3.7 507 612 802 1 3750 18.5 1491 1530 1599 1725 1956 16 1800 6.7 777 843 969 1208 1616 2 3600 16.4 1456 1486 1553 1686 1939 2188 2416 1500 4.3 486 568 724 1 4200 14.6 1139 1175 1244 1366 1599 18 2100 10.1 696 752 857 1045 1369 2 4200 19.9 1302 1331 1391 1505 1715 1906 2090 1600 3.2 388 477 1 4400 10.9 831 869 943 1082 1340 22 3000 7.7 574 620 705 863 1127 2 5500 16.5 987 1015 1069 1167 1353 1525 1682 2500 3.3 355 416 536 1 7500 19.1 865 892 946 1045 1212 24 4900 10.2 520 555 623 743 949 2 8400 20 849 871 914 994 1145 1283 1407 3750 4.4 293 343 1 9750 15.0 629 655 704 788 940 30 5600 8.1 427 461 527 644 844 2 10400 18.5 746 765 803 877 1017 1142 1259 5600 5.4 273 311 379 1 12800 19.1 545 565 603 673 796 36 9600 12.9 397 420 467 556 721 2 15600 19.0 620 635 664 722 837 943 1045 Performance certified is for installation type : Free inlet, Ducted outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : free inlet fan sone levels. 55 TC

QEI-L, QEI-I/II 56 QEI-L, QEI-I/II ll sizes Patented QEI US Patent No. 7048499 China (P.R.) Patent No. CN1294361C Mexico Patent No. 243465 UL/cUL 705 Power Ventilators E40001 - QEI-L, QEI-I/II UL/cUL 762 Power Ventilators for Restaurant Exhaust ppliances - MH11745 - QEI-I/II UL/cUL Power Ventilators for Smoke Control Systems MH17511 - QEI-I/II Greenheck Fan Corporation certifies that the QEI-L and QEI-I/II shown herein are licensed to bear the MC seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and MC Publication 311 and comply with the requirements of the MC Certified Ratings Program. MC Licensed Sound and ir Performance is found in Greenheck s QEI-L, QEI, and QEID catalog, 00.CVI.1018 R8 10-2013 est vailable Program QEI-L, QEI-I/II elt Drive Mixed flow fans are for use in commercial and industrial applications that demand quiet, efficient and reliable air movement. Typical applications include office buildings, concert halls, libraries, parking garages, educational facilities and dormitories. s can be used in exhaust, supply, and return-air, clean or contaminated air ventilation installations with continuous airstream temperatures up to 200 F. Units may be ceiling hung or floor mounted. Performance QEI-L capacities range from 700 to 40,000 cfm and up to 5 in. wg of static pressure. QEI-I/II capacities range from 500 to 115,000 cfm and up to 8.5 in. wg of static pressure. Standard Construction Housing - continuously welded, steel Minimum bearing life of L 10 80,000 hours (verage life - L 50 400,000 hours) Wheel - mixed flow with steel blades Straightening vanes Universal mounting system (sizes 9-27) ccess door - bolted Final assembly vibration analysis Slip-fit collar for duct connection Extended lube lines elt guard Permatector protective powder coating Options and ccessories Totally enclosed belt guard Copper lube lines Motor cover Roof upblast options available (sizes 9-54) Guards - inlet, outlet Decorative or protective powder coating Flanges - inlet, outlet UL/cUL Listed Power Ventilators Isolators - base, hanging UL/cUL Listed Power Ventilators for elt tube Restaurant Exhaust ppliances NEM rated disconnect switch UL/cUL Listed Power Ventilators for Mounting rails Smoke Control Systems - horizontal and all vertical applications Universal Mounting Universal QEI fans can be mounted vertically (ceiling hung or base mount) for either upward or downward airflow. Optional mounting rails are suggested for any vertical installation. s 9-27 One configuration for base mounting or ceiling hung applications. llows for field rotation of motor position. s 30-60 vailable in horizontal and vertical configurations. Horizontal applications allow for field rotation of motor position. Optional Mounting Rails Vertical Ceiling Hung Horizontal ase Mount Motor Positions determined from the discharge end G H Horizontal ase Mount Horizontal ase Mount with motor at C or G position C G F E Horizontal Ceiling Hung Horizontal Ceiling Hung D C Optional Mounting Rails Horizontal Ceiling Hung with motor at C or G position Vertical Mounting Vertical mounting configurations, upblast or downblast, are provided with heavy-duty steel brackets welded to both ends. These brackets permit either floor or ceiling mounting on the same unit. Optional mounting rails are suggested for any vertical installation for sizes 9-27. Vertical ase Mount Vertical Upblast www.greenheck.com Mixed Flow Fans For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

Mixed Flow - QEI-L, QEI-I/II The mixed flow fan is a quiet, highly efficient alternative for inline ventilation. The unique axial/centrifugal hybrid wheel design captures the highly efficient straight-through airflow of vane axials and the lower sound levels of tubular centrifugal fans to provide an energy efficient product that won t be a distraction in your ventilation system. Flexible Universal Mounting System allows for field rotation of motor location. ll motors are mounted on adjustable pivot bases for easy adjustments. Sealed belt guard protects personnel and minimizes air leakage around motor shaft. QEI-L, QEI-I/II Permatector coating is an industrial grade, electrostatic powder paint. Provides a durable, long lasting finish for interior or exterior applications. Extended collar on inlet and outlet allow for quick and easy slip-fit duct connections to ductwork or plenum wall. Flexible Sleeve Integral, spun inlet cone provides even airflow into the wheel in ducted or non-ducted applications and helps to reduce system effects associated with uneven duct velocity profiles. Mixed flow wheels are designed with single-thickness, cambered blades to maximize free area and efficiency. Tight wheel to cone tolerances further improve the mechanical efficiency. erodynamically designed straightening vanes improve performance by converting kinetic energy of swirling air into useful static pressure. Fan Duct Cast, flange-mounted bearings are air-handling quality and use concentric bore locking systems for smooth operation. earings are selected for a minimum L 10 life in excess of 80,000 hours at the maximum fan class RPM. (verage life - L 50 400,000 hours) 57 irflow Profiles Centrifugal Fan: Two 90 deflections, before airflow exits the fan. xial Fan: Straight-through, nearly linear airflow. Mixed Flow QEI Fan: Slight airflow defection from straight-through. Lower Sound Power, etter Sound Quality The sound quality of the QEI is as beneficial to low sound design as is the reduced overall sound power. The sound chart compares units of similar outer tube diameters at an operating point of 20,000 cfm with 1.5 inches wg of static pressure (Ps). Tubular centrifugals (green) have dominant tones in the 63 Hz through 250 Hz octave bands, while vane axials (red) have more mid to high frequency sound. The QEI does not have a dominant tone. bystander would hear a more bland sound that is quieter than a tubular centrifugal or vane axial. Sound Power, d Typical Tubular Centrifugal Typical Vane xial QEI 100 90 80 70 60 62 125 250 500 1000 2000 4000 8000 Frequency, Hz

TDI, TI-C, TI-FS 58 pplications: Clean ir Fume Exhaust Spark Resistant Construction pplications: Clean ir Fume Exhaust Spark Resistant Construction pplications: Industrial Space Contaminated ir High Temperature Process UL/cUL Emergency Smoke TDI Direct Drive TDI direct drive tube axial fans are best suited for applications moving relatively clean, dry and cool air in commercial and industrial applications. Performance Capacities range from 2,100 to 48,400 cfm and up to 0.875 in. wg of static pressure. TI-C elt Drive TI-C belt drive is a good selection where the motor must be mounted out of the airstream. Used with temperatures up to 200 F or contaminated air. Three levels of construction available. Performance Capacities range from 1,400 to 96,000 cfm and up to 1.25 in. wg of static pressure. TI-FS elt Drive TI-FS belt drive fans have motors out of the airstream. They are a good choice for clean or contaminated airstreams with temperatures up to 400 F. Three levels of construction available. Performance Capacities range from 3,900 to 76,000 cfm and up to 4 in. wg of static pressure. est vailable Program UL/cUL 705 Power Ventilators E40001 - TDI and TI-C UL/cUL Power Ventilators for Smoke Control Systems MH17511 - TI-FS Greenheck Fan Corporation certifies that the TDI and TI-C shown herein are licensed to bear the MC seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and comply with the requirements of the MC Certified Ratings Program. Greenheck Fan Corporation certifies that the TI-FS shown herein is licensed to bear the MC seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and Publication 311 and comply with the requirements of the MC Certified Ratings Program. Standard Construction TDI TI-C TI-FS Housing - continuously welded, steel Cast aluminum hub and blades - airfoil Fabricated steel hub and blades - airfoil elt tube and bearing cover Minimum bearing life of L 10 80,000 hours Universal mounting system Extended lubrication lines Permatector protective powder coating Options and ccessories TDI TI-C TI-FS Motor cover Guards - inlet, outlet elt guard Companion flanges Isolators - base, hanging, spring Easy access construction - bolted Inspection door - bolted, hinged Inspection section with removable access panel NEM rated disconnect switch Mounting rails Shaft seal Inlet bell Decorative or protective powder coating Continuous Duty High Temperature UL/cUL Listed Power Ventilators UL/cUL Power Ventilators for Smoke Control Systems www.greenheck.com Tube xial Fans For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

irflow E O.D. I.D. C Dimensions for TDI, TI-C, TI-FS TDI Level 3 TI-C Level 3 TI-FS Levels 3 and 4 C D C D E C D E (ID) (OD) (C) (ID) (OD) (C) (ID) (OD) (C) 18 18 3 8 21 1 16 19 3 4 18 18 18 3 8 21 5 8 19 3 4 22 21 3 4 3H24 23 26 243 8 27 5 8 25 3 4 20 20 3 8 23 1 16 21 3 4 19 20 20 3 8 23 5 8 21 3 4 22 23 3 4 4H24 28 28 24 24 3 8 27 1 16 25 3 4 19 24 24 3 8 27 5 8 25 3 4 23 26 3H30 24 29 1 303 8 33 5 4 8 32 30 30 3 8 33 9 16 32 21 30 30 3 8 33 5 8 32 24 29 1 4 4H30 33 32 3 4 36 36 3 8 39 9 16 38 21 36 36 3 8 39 5 8 38 29 33 3 4 3H36 29 33 3 363 8 39 5 4 8 38 TDI, TI-C, TI-FS 42 42 1 2 45 3 4 44 3 16 27 42 42 1 2 45 3 4 44 1 4 30 37 1 4 4H36 34 35 1 4 D 48 48 1 2 52 3 4 50 3 4 27 48 48 1 2 52 3 4 50 3 4 33 40 1 2 3H42 30 37 1 421 2 45 3 4 44 1 4 4 54 55 59 1 4 57 1 4 37 1 2 47 1 4 4H42 39 40 ll dimensions are in inches. 60 61 65 1 4 63 1 4 40 50 3 4 3H48 481 2 52 3 4 50 3 4 33 40 1 2 ID = Inside Diameter OD = Outside Diameter C = olt Center 4H48 44 45 1 2 3H54 37 1 55 59 1 4 57 1 2 47 1 4 4 4H54 48 49 1 4 Performance for TDI Level 3 lades Pitch Min/Max RPM CFM / Static Pressure in inches wg 0.125.25.5.75.875 18 06-30 1140 3566 3230 06-34 1725 5873 5657 5417 4748 20 03-35 1140 4758 4103 3279 04-29 1725 7018 6682 6354 5594 06-30 860 6215 5391 4313 24 06-35 1140 9028 8398 7667 06-31 1725 12599 12226 11837 10922 9919 9380 06-33 860 12478 11175 9659 30 06-30 1140 15599 14762 13793 04-28 1725 20633 19895 19174 17717 15818 06-39 860 21839 20153 18236 36 06-30 1140 26098 24952 23759 21095 04-26 1725 33394 32488 31582 29765 27576 26395 06-35 680 24214 21392 18361 42 06-25 860 27069 25358 23243 17849 06-35 1140 40594 39128 37337 34109 06-30 680 32194 28973 24774 48 06-24 860 38105 35525 32712 25851 06-21 1140 48407 46587 44918 41348 Performance certified is for installation type : Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories). 59 Performance for TI-C Level 3 3L18 3M18 3H18 3H20 3H24 3H30 3H36 3H42 3H48 3H54 3H60 Min/Max CFM / Static Pressure in inches wg RPM.125.25.5.75 1 1.25 1890 1914 1659 3000 3225 3103 2825 2427 1868 1253 1610 2171 1937 2710 3874 3758 3502 3209 2832 1189 2698 2331 2290 5583 5450 5152 4781 4358 1056 3126 2618 2225 7186 7032 6673 6234 5761 5483 977 4931 4223 1990 10858 10619 10085 9422 8718 7926 848 7473 6405 1815 17648 17222 16278 15321 14327 13167 763 10388 8620 1710 25929 25301 23973 22609 21122 19364 594 13266 10728 1326 32585 31815 30334 28652 26506 23892 490 16808 14083 1024 38804 37720 35371 33046 30421 25718 476 27099 23391 910 56134 54567 51229 47707 42975 507 37656 33757 970 76735 74906 71249 67412 62911 57746 Performance certified is for installation type : Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories). Performance for TI-FS Levels 3 and 4 Min/Max CFM / Static Pressure in inches wg RPM.125.5 1.5 2 3 4 3L24 971 5425 3H24 1988 9990 9416 6827 4L24 1122 5439 4H24 2707 12829 11825 11228 9161 5907 3L30 794 8256 3H30 1834 14545 13838 11006 4L30 870 7653 4H30 2306 20075 18271 17201 13614 9546 3L36 660 11834 3H36 1476 23800 22460 16514 4L36 782 11824 4H36 1824 27723 25857 24376 20432 13643 3L42 611 16553 3H42 1271 26614 25157 17430 4L42 689 15343 4H42 1607 33454 30713 29526 24753 15561 3L48 479 18483 3H48 1039 30969 28139 4L48 795 29849 4H48 1509 47501 44702 42568 37957 30148 3L54 423 25121 3H54 999 48511 46357 35171 4L54 675 39677 4H54 1337 61340 57710 56126 48925 36972 Performance certified is for installation type : Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories).

V 60 rrangement 9 Class I s 18-48 UL/cUL 705 Power Ventilators E40001 - V Greenheck Fan Corporation certifies that the V shown herein is licensed to bear the MC seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and comply with the requirements of the MC Certified Ratings Program. MC Licensed ir Performance is found in Greenheck s Vane xial Performance Supplement, 00.CVI.N004 R3 8-2011 est vailable Program D V elt Drive Vane axial fans feature the advantages of final system balancing, motor access, manually adjustable blade pitch, economical future upgrading, and the capability to operate in airstream temperatures up to 200 F. Performance Capacities range from 2,000 to 70,000 cfm and up to 7 in. wg of static pressure. Standard Construction Housing - continuously welded, steel Cast aluminum hub and blades Straightening vanes Final assembly vibration analysis Extended lubrication lines Permatector protective powder coating Options and ccessories Motor cover Guards - inlet, outlet elt guard Companion flanges - inlet, outlet Inlet/outlet cone Isolators Inspection section NEM rated disconnect switch Inlet bell Horizontal or vertical mounting options Decorative or protective powder coating UL/cUL Listed Power Ventilators Mounting Options Horizontal Mounting Legs Heavy-gauge steel support legs welded to the fan are punched to accept neoprene or spring vibration isolators. Optional Inlet ell Vane xial Fan irflow C Optional Inlet/Outlet Cone Horizontal Suspension rackets rackets welded to the fan housing for horizontal ceiling hung applications are punched to accept hanging neoprene or spring isolators. Dimensions for V C D 18 18 3 8 21 3 4 13 1 2 32 20 20 3 8 23 3 4 15 32 24 24 3 8 27 3 4 17 1 2 36 30 30 3 8 33 3 4 21 1 4 40 36 36 3 8 39 3 4 25 40 42 42 1 2 47 29 44 48 48 1 2 53 34 48 ll dimensions are in inches. Vertical ase or Suspension rackets rackets welded to the fan housing for vertical base mount or vertical ceiling hung applications are punched to accept vibration isolators. Customer must specify one of the mounting arrangements shown below. UFM UCH DFM DCH www.greenheck.com Vane xial High Pressure Fans For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

1 2 11 3 5 9 10 5 4 5 7 4 12 9 6 8 13 13 14 15 whole health. Efficient air systems for sustainable hospitals. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Mixed Flow Fan Combination Louver/ Damper Utility Fan Spun luminum Roof Exhaust Packaged Ventilation System Laboratory Exhaust System Centrifugal Inline Fan Energy Recovery Ventilator Spun luminum Upblast Exhaust Fan Centrifugal Supply Fan Louvered Equipment Screen Make-Up ir Centrifugal Inline Fan/ Fire Smoke Damper Kitchen Hood Utility Distribution System Today s hospital ventilation needs are more dynamic and demanding than ever, with increased focus on energy efficiency and sustainable building design concepts. To meet complex and interrelated demands throughout a medical facility, you must equip for a wide variety of critical, specialized applications public areas, offices, surgery suites, highly sensitive equipment, patient rooms, laboratories, kitchen and cafeteria. Only an integrated HVC system can provide the reliability and performance a hospital needs. Greenheck offers a comprehensive line of products, designed to work together, effectively, with energy efficiency and quiet operation, and the added benefit of simplified installation to save time and costs. We offer more products with certifications from MC, UL, ETL, HRI and CS than any other manufacturer. nd, many Greenheck products can help attain LEED credits. Take a holistic and sustainable approach for your hospital project contact your Greenheck representative today. Learn more at greenheck.com/4hospital Fans & Ventilators Centrifugal & Vane xial Fans Energy Recovery Ventilators Packaged Ventilation Systems Make-up ir Units Kitchen Ventilation Systems Dampers Louvers Lab Exhaust Systems Coils 715.359.6171 greenheck.com Scan code to learn more about hospital system ventilation.

SE, SS, SCE, SCS, SE, SS, SCE, SCS 62 elt Drive Direct Drive UL/cUL 705 Power Ventilators E40001 - SE1/SS1, SE2/SS2, SCE3/SCS3, SE/SS, SCE/SCS UL/cUL Listed 705 is standard on In Stock SE1 and SE models. Greenheck Fan Corporation certifies that the S1, S2, SC3, S and SC shown herein are licensed to bear the MC seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and MC Publication 311 and comply with the requirements of the MC Certified Ratings Program. est vailable Program SE-8 through 12, 16 and 20 In Stock SE-24 through 36 ll SE/SS, SCE/SCS, SE/SS, SCE/SCS 3 Days up through size 48 ll SE/SS, SCE/SCS, SE/SS, SCE/SCS 5 Days sizes 54 and larger SE, SS, SCE, SCS Direct Drive and SE, SS, SCE, SCS elt Drive Sidewall propeller fans are designed to exhaust or supply high volumes of air from commercial and industrial buildings. Fan panels allow for electrical passage to either side of panel for easy wiring. Standard Construction Direct Drive SE SS SCE SCS SE SS elt Drive SCE SCS Fan panel and drive frame - galvanized steel Propeller construction Stamped aluminum Level 1 Fabricated steel Level 2 Fabricated steel Fabricated steel Level 3 Cast aluminum Corrosion-resistance fasteners Reversible all bearing motor - 1/4 hp and larger Three speed motor (sizes 8 through 12) djustable motor pulley Options and ccessories Stock SE SS SCE SCS SE SS SCE SCS Vari-Green motor - 80% turndown, 85% efficient vailable as standard on select sizes Dampers Wall housing - up through size 24 Wall collar - up through size 36 Weatherhood 45 - up through size 24 and size 36 Weatherhood 90 - up through size 16 and size 24 Motor side guard - size 20 through 30 OSH motor side guard - size 16 Louver/Fire damper - size 20 through 42 Damper guard Horizontal mounting Wiring - pigtails Lube lines Filters - 2 inch aluminum, washable - supply only NEM rated disconnect switch Dual drives Relubricatable bearings OSHPD rated Decorative or protective powder coating UL/cUL Listed Power Ventilators Select sizes and models with the Vari-Green motor are available in stock. www.greenheck.com Sidewall Propeller Exhaust Fans For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

Direct Drive Level 1: 8-12 Level 1: 12-24 Level 2: s 16-54 Level 3: s 20-54 * C* D Exhaust irflow * C* D E E F* Supply irflow F* D D Dimensions for Direct Drive Fan Panel irflow D Exhaust Supply Sq. Flange * C* E F* 8 13 1 7 5 8 3 8 8 10 15 1 8 3 4 5 10 3 8 8 12 18 1 10 3 4 8 1 4 12 3 8 13 1 8 14 20 1 11 1 4 8 1 2 14 3 8 14 1 4 16 22 1 13 1 2 10 1 4 16 3 8 14 18 24 1 14 10 7 8 18 3 8 14 1 4 20 26 1 17 1 4 13 1 2 20 1 2 18 24 32 1 1 4 20 13 1 2 24 5 8 21 30 38 1 1 4 20 1 2 16 3 8 30 5 8 21 3 4 36 44 2 20 1 2 16 3 8 36 5 8 28 42 50 2 26 18 1 4 42 5 8 28 48 56 2 26 5 8 20 5 8 49 1 4 28 1 2 54 62 2 28 22 7 16 55 3 8 30 1 8 ll dimensions are in inches. *Varies with motor selection. 63 SE, SS, SCE, SCS, SE, SS, SCE, SCS Exhaust irflow Supply irflow elt Drive Level 1: s 20-54 Level 2: s 20-60 Level 3: s 24-30 * F* C* D D Level 3: s 36-72 D Exhaust irflow * C* E Supply irflow D F* Dimensions for elt Drive Fan Panel Exhaust Supply Sq. Flange Levels Level ll Levels Level 1 and 2 3 Levels 1 and 2 3 D * C* * C* E F* F* 20 26 1 19 1 2 16 1 4 20 1 2 20 24 32 1 1 4 19 1 2 16 1 8 19 15 5 8 24 5 8 20 20 1 2 30 38 1 1 4 21 1 2 17 1 4 21 1 2 17 1 4 30 5 8 21 20 36 44 2 21 1 2 16 1 2 28 23 36 5 8 22 27 42 50 2 25 20 28 23 42 3 4 25 1 2 29 1 4 48 56 2 25 19 31 1 2 27 1 2 48 3 4 25 1 2 30 1 2 54 62 2 26 20 1 2 35 3 4 30 1 4 55 1 4 24 36 1 4 60 68 2 28 21 7 16 35 28 7 16 61 1 4 24 35 1 2 72 82 2 1 8 35 28 1 4 73 1 4 35 1 2 ll dimensions are in inches. * Varies with motor selection. E Exhaust irflow Supply irflow

Options and ccessories for Sidewall Propeller Fans Options and ccessories for Sidewall Propeller Fans Wall Housing Wall Collar ++ C 90º Weatherhood Motor Side Guards 45º Weatherhood D E G 64 F Motor Side Guard Depth OSH Motor Side Guard Depth Damper Guard Depth Optional Direct Drive Configuration Optional elt Drive Configuration Dimensions Wall Housing & Collars Weatherhood Motor Side OSH Motor Damper Wall Damper Square Length 45 90 Guard Side Guard Guard Opening* Width ++ C D E F G Depth Depth Square Depth 8 14 1 4 13 1 4 19 16 1 8 10 1 2 13 1 4 11 1 4 16 3 8 12 9 5 8 10 5 1 2 10 16 1 4 15 1 4 19 16 1 8 12 1 2 14 7 8 13 3 8 18 1 2 14 10 12 6 1 2 12 19 1 4 18 1 4 23 16 1 8 14 1 2 16 3 8 15 5 8 20 3 8 16 3 8 12 14 5 3 8 14 21 1 4 20 1 4 26 18 3 8 16 1 2 17 1 2 17 5 8 22 1 2 18 3 8 12 16 6 3 8 16 23 1 4 22 1 4 27 18 3 8 18 1 2 19 3 8 19 5 8 25 20 3 8 12 18 6 3 4 18 25 1 4 24 1 4 28 18 3 8 20 1 2 22 21 5 8 27 1 2 22 3 8 12 20 6 20 27 1 4 26 1 4 32 18 3 8 22 1 2 24 3 4 23 5 8 29 3 4 24 3 8 17 3 8 17 3 4 22 6 1 2 24 33 3 4 32 1 4 37 18 3 8 29 1 8 26 7 8 30 3 8 36 31 3 4 19 1 2 20 26 6 3 8 30 39 3 4 38 1 4 38 18 3 8 35 1 8 29 1 8 36 1 2 40 1 8 37 7 8 22 1 2 21 3 4 32 6 1 2 36 45 3 4 44 1 4 39 18 3 4 41 1 8 33 42 1 2 45 1 2 43 7 8 23 7 8 24 1 4 38 6 3 4 42 51 3 4 50 3 8 44 18 3 4 47 1 8 35 3 4 48 1 2 49 1 4 49 7 8 25 7 8 28 1 2 44 10 48 57 3 4 56 3 8 44 18 7 8 53 1 4 40 3 8 54 5 8 55 1 2 56 28 7 8 28 1 4 50 9 54 63 3 4 62 3 8 52 20 1 8 59 1 2 44 3 4 60 7 8 61 1 4 62 1 4 34 1 4 56 7 1 2 60 69 3 4 68 3 8 54 21 65 5 8 48 3 8 67 66 1 2 68 3 8 34 1 4 62 7 1 4 72 84 3 4 83 1 8 60 22 78 1 8 53 1 4 79 1 2 72 1 8 80 7 8 34 1 4 74 7 1 2 ll dimensions are in inches. *Opening is for fan and accessories to fit. ++Indicates short wall housing dimension. dd 6 inches for long wall housing. dd 10 inches for louver/fire damper.

Performance for SE, SS Levels 1, 2 Exhaust and Supply Performance for SCE, SCS Level 3 Exhaust and Supply Level lades Pitch 8 1-440 10 1-440 12 14 16 18 20 24 30 36 42 48 CFM / Static Pressure in inches wg 0.1.125.2.25.375.5.625.75 1 Motor HP Fan RPM Max HP 311 126 100 1/100 1050 50W 1.5 Sones @ 0 Quick uild est vailable In Stock Direct Drive 399 256 198 138 1/40 1350 55W 3.5 SE1-8-DGEX-QD 3 Days 459 351 307 198 167 1/25 1550 75W 4.9 511 435 387 261 220 1/6 1750 32.8 7.6 626 361 1/40 1050 105W 3.2 804 655 615 1/20 1350 135W 4.9 SE1-10-DGEX-QD 3 Days 924 800 763 641 1/12 1550 170W 5.9 1029 921 889 792 707 1/6 1750 73.1 6.9 981 744 678 463 383 1/20 1050 125W 4.3 1262 1097 1037 886 798 540 1/12 1350 170W 6.0 1-432 SE1-12-DGEX-QD 1449 1309 1271 1129 1042 860 614 478 1/8 1550 190W 7.5 3 Days 1636 1515 1481 1365 1282 1085 947 706 585 1/4 1750 0.27 8.7 1-436 1621 1513 1471 1346 1230 639 1/4 1750 0.13 17.0 1189 919 711 551 408 1/8 860 0.07 5.9 1-440 1604 1406 1350 1207 908 720 1/6 1160 0.15 7.3 2386 2234 2205 2119 2048 1877 1435 1282 1163 828 1/2 1750 0.55 11.0 1-436 2734 2615 2585 2487 2422 2192 1829 1220 1/3 1750 0.39 14.8 1-436 2003 1732 1621 1037 849 1/8 860 0.12 5.0 3 Days 2-435 2522 2239 2150 1732 1434 1/6 1160 0.20 11.6 1-436 2702 2512 2461 2281 2067 1359 1049 1/4 1160 0.29 9.5 3 Days 2-430 3531 3344 3297 3155 3058 2750 2303 1642 1/2 1750 0.56 23 1-436 4076 3954 3923 3828 3760 3591 3349 2902 2298 3/4 1750 0.89 16.6 SE1-16-VG7X-QD 1-436 2778 2319 2102 1385 1108 912 1/6 860 0.19 9.2 2-435 3658 3311 3208 2850 2556 1/3 1160 0.35 16.2 1-436 3747 3466 3370 3034 2732 1727 1363 1/3 1160 0.45 12.6 2-421 4177 4015 3975 3807 3683 3416 3059 2558 1/2 1750 0.59 22 1-429 4885 4729 4690 4565 4460 4196 3926 3460 2984 3/4 1750 0.88 17.4 1-436 3888 3523 3420 2918 2237 1873 1/4 860 0.29 11.7 2-430 4468 4087 3989 3626 3281 1/3 1160 0.40 18.6 3-630 4394 4115 4049 3809 3635 3039 1/2 1160 0.55 25 3 Days 1-436 5245 4991 4926 4697 4525 3863 2920 2650 1/2 1160 0.70 14.4 3 Days 1-420 6005 5797 5745 5564 5434 5106 4739 4327 3763 1 1750 1.26 42 SE1-20-VG10X-QD 1-432 7115 6962 6924 6809 6733 6518 6292 6016 5688 1 1 2 1750 1.73 26 2-435 7266 6980 6909 6691 6543 6115 5453 4658 1 1 2 1750 1.76 35 3-630 5924 5401 5252 4653 4184 1/2 860 0.45 18.2 1-437 6136 5764 5631 5150 4720 1/2 860 0.58 11.6 2-630 6439 5768 5599 4993 4387 1/2 860 0.54 18.8 1-432 6745 6399 6313 6064 5830 5007 3/4 1160 0.83 14.7 2-625 7917 7491 7391 7060 6781 6035 4850 2745 1 1160 1.13 25 3-630 7991 7644 7535 7206 6984 6203 5304 1 1160 1.10 28 2-615 9537 9310 9253 9083 8961 8646 8315 7915 7508 6559 2 1750 2.28 41 3-620 9721 9501 9446 9281 9159 8844 8488 8126 7757 6886 2 1750 2.37 53 3-627 11192 10384 10182 9484 8897 6869 1 860 1.01 23 2-635 13290 12505 12291 11647 11060 7951 1 1 2 860 1.80 32 2-620 13905 13434 13316 12939 12665 11954 11144 10136 8640 2 1160 2.29 33 3-625 14779 14160 14005 13537 13220 12376 11276 9927 2 1160 2.32 40 2-617 15162 14491 14324 13810 13442 12117 10512 7704 5270 1 1 2 860 1.61 31 3-627 19898 18735 18408 17299 16428 13942 2 860 2.30 31 2-614 18400 17945 17832 17490 17263 16517 15787 15003 13722 10993 3 1160 3.29 40 3-617 21781 20957 20751 20134 19710 18607 17398 15999 14133 3 1160 3.54 49 3-629 23088 21265 20790 19236 18050 2 690 2.40 31 3-620 24242 23108 22791 21840 21181 19111 16580 12206 3 860 3.11 36 2-627 28811 27924 27702 27037 26533 25261 24002 22494 20376 13589 5 860 5.95 41 3-625 32762 30379 29640 27385 25882 20889 3 690 3.29 41 2-422 34332 33166 32874 31944 31257 29594 27990 25869 23518 5 860 5.91 53 3-630 43290 41324 40745 38989 37745 34864 30731 7 1 2 860 7.66 53 2-420 41542 39736 39284 38011 37177 34995 32089 28911 25289 14535 5 690 5.76 52 3 Days 3 Days 3 Days 3 Days 3 Days 3-328 44402 41230 40512 38189 36133 30263 22490 5 690 5.82 40 54 5 Days 2-416 45612 44465 44179 43319 42745 40967 39103 37130 34973 30171 7 1 2 860 8.68 54 3-323 51206 48980 48424 46616 45404 42712 39307 35027 29939 7 1 2 860 9.00 50 Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). *Speed (RPM) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : free inlet hemispherical sone levels. 65 SE, SS, SCE, SCS, SE, SS, SCE, SCS

SE, SS, SCE, SCS, SE, SS, SCE, SCS 66 Performance for SE, SS Levels 1L, 2L, 3L Exhaust and Supply 20 24 30 36 42 48 54 60 Level 1L 2L 1L 2L 3L 1L 2L 3L 1L 2L 3L 1L 2L 3L 1L 2L 3L 1L 2L 3L 2L 3L 72 3L CFM / Static Pressure in inches wg Motor Fan Max Sones Quick uild In Stock 0.1.125.2.25.375.5.625.75 HP RPM HP @ F est vailable elt Drive 4404 3795 3672 1/4 861 0.30 14.3 4844 4271 4156 3648 1/3 947 0.40 16.1 5550 5021 4919 4621 4269 1/2 1085 0.60 17.9 3 Days 5550 5021 4919 4621 4269 1/2 1085 0.60 17.9 6348 5853 5764 5496 5325 4479 3/4 1241 0.90 22 5569 4803 4551 1/4 593 0.30 11.8 6133 5466 5256 1/3 653 0.40 12.8 7025 6455 6300 5723 4939 1/2 748 0.60 14.8 SE-1L24-LMDX-QD 7598 7079 6935 6454 5948 3/4 809 0.76 17.4 7025 6455 6300 5723 4939 1/2 748 0.60 14.8 8039 7555 7419 6989 6654 3/4 856 0.90 21 3 Days 8847 8409 8294 7925 7643 6476 1 942 1.20 28 9260 8842 8738 8385 8139 7205 1 1 2 986 1.37 33 8062 7592 7463 7034 6634 5492 3/4 1024 0.90 24 8873 8454 8337 7977 7686 6668 5569 1 1127 1.20 27 7860 6394 5880 1/4 475 0.30 11.6 8654 7427 6970 1/3 523 0.40 13.0 9895 8898 8583 7366 1/2 598 0.60 15.5 SE-1L30-LMDX-QD 11335 10496 10253 9332 8622 3/4 685 0.90 18.7 11517 10696 10456 9570 8874 1 696 0.94 19.2 11335 10496 10253 9332 8622 3/4 685 0.90 18.7 3 Days 12477 11736 11519 10806 10175 1 754 1.20 21 14297 13650 13489 12923 12522 11132 1 1 2 864 1.81 27 15720 15132 14985 14503 14152 13039 11760 2 950 2.41 32 15222 14568 14404 13905 13549 12519 10795 2 961 2.40 29 17423 16852 16709 16281 15991 15201 14241 12775 11254 3 1100 3.61 41 11078 8915 8018 1/3 384 0.41 11.8 12636 10809 10290 1/2 438 0.61 13.6 14425 12890 12435 10808 8915 3/4 500 0.90 15.3 SE-1L36-LMDX-QD 15896 14558 14146 12908 11731 1 551 1.21 17.7 15867 14525 14113 12873 11682 1 550 1.21 17.6 3 Days 18204 17113 16759 15680 14959 12176 1 1 2 631 1.81 22 19993 18999 18744 17762 17106 15154 2 693 2.41 27 19709 18646 18404 17438 16759 14576 2 716 2.41 22 22544 21590 21378 20658 20081 18511 16505 3 819 3.60 28 13701 10026 1/3 294 0.40 11.1 15612 12415 11671 1/2 335 0.60 13.0 17942 15273 14451 11298 3/4 385 0.92 15.8 19759 17478 16705 14777 1 424 1.21 18.8 19759 17478 16705 14777 1 424 1.21 18.8 22555 20599 20064 18117 17086 1 1 2 484 1.80 23 3 Days 24792 23046 22560 20881 17957 16579 2 532 2.40 27 28474 26984 26586 25316 24279 21952 18527 3 611 3.65 31 33693 32435 32120 31102 30386 28275 26322 24165 5 723 6.00 39 27349 25968 25623 24537 23737 21321 17720 3 640 3.61 26 32563 31403 31113 30243 29634 27942 25934 23434 5 762 6.01 33 18171 14077 11902 1/2 282 0.60 10.5 20877 17700 16601 3/4 324 0.91 13.0 22875 20096 19220 14778 1 355 1.20 15.4 22875 20096 19220 14778 1 355 1.20 15.4 26226 23841 23203 20720 17923 1 1 2 407 1.80 18.9 28868 26733 26154 24229 22469 2 448 2.40 21 3 Days 33056 31241 30735 29218 28043 23721 3 513 3.60 28 39177 37652 37271 36010 35157 32745 29209 5 608 5.99 36 33257 31277 30810 29181 27830 23228 3 506 3.61 25 39435 37765 37347 36157 35241 32427 28734 5 600 6.02 33 45088 43627 43262 42175 41495 39429 36866 33882 7 1 2 686 9.00 44 23892 19346 17418 3/4 272 0.92 12.7 26352 22515 21155 1 300 1.21 14.1 30129 26851 26014 21850 16537 1 1 2 343 1.83 17.3 30129 26851 26014 21850 1 1 2 343 1.81 17.3 33379 30420 29680 26821 23826 2 380 2.46 19.6 38035 35439 34789 32810 30926 3 433 3.61 26 5 Days 44623 42410 41857 40196 39088 35194 28363 5 508 5.97 44 36557 33708 32974 30005 27535 3 415 3.61 27 43339 40968 40348 38489 36778 31783 26116 5 492 6.02 44 49594 47550 47008 45384 44301 40440 36084 30683 7 1 2 563 9.03 49 54526 52685 52198 50721 49736 46840 42826 39077 10 619 12.0 56 35628 28888 26731 1 1 2 267 1.80 16.7 39231 33280 31524 2 294 2.41 20 44969 39902 38533 33664 3 337 3.63 25 53242 49009 47929 44361 41676 5 399 6.02 31 5 Days 53242 49009 47929 44361 41676 5 399 6.02 31 60982 57286 56362 53476 51359 45184 7 1 2 457 9.05 56 67120 63762 62923 60374 58582 53530 10 503 12.1 72 50841 46713 45654 40999 3 288 3.61 22 60197 56743 55852 53170 50373 5 341 6.01 29 69024 66011 65258 62930 61371 55346 7 1 2 391 9.03 38 5 Days 75909 73169 72484 70395 68977 64603 58769 10 430 12.1 45 86854 84459 83861 82065 80838 77740 73537 68410 15 492 18.0 57 Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). *Speed (RPM) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : free inlet hemispherical sone levels.

Performance for SE, SS Levels 1H, 2H, 3H Exhaust and Supply 20 24 30 36 42 48 54 60 Level 1H 2H 1H 2H 3H 1H 2H 3H 1H 2H 3H 1H 2H 3H 1H 2H 3H 1H 2H 3H 2H 3H 72 3H CFM / Static Pressure in inches wg Motor Fan Max Sones Quick uild 0.1.125.2.25.375.5.625.75 1 HP RPM HP @ F est vailable 3581 3247 3148 2769 2469 1160 657 1/4 953 0.30 16.2 3904 3608 3517 3212 2954 2037 1064 603 1/3 1039 0.40 17.2 4587 4339 4277 4049 3873 3333 2514 1456 1064 1/2 1221 0.60 20 3 Days 4587 4339 4277 4049 3873 3333 2514 1456 1064 1/2 1221 0.60 20 5226 5008 4954 4774 4639 4244 3741 3005 1886 1138 3/4 1391 0.90 25 4105 3618 3445 2848 2105 1133 444 1/4 785 0.30 13.3 4586 4157 4041 3564 3179 1845 1108 491 1/3 877 0.36 16.1 5281 4920 4819 4471 4193 3093 2108 1439 904 1/2 1010 0.60 19.9 5281 4920 4819 4471 4193 3093 2108 1439 904 1/2 1010 0.60 19.9 3 Days 6003 5685 5606 5340 5122 4502 3343 2510 1853 910 3/4 1148 0.90 25 6937 6650 6576 6337 6174 5721 5195 4494 3495 3/4 1330 0.90 24 7746 7489 7425 7216 7073 6704 6271 5793 5208 3470 1 1485 1.28 28 6970 6129 5860 4743 1/4 610 0.30 12.6 7713 6950 6763 5939 5160 1/3 675 0.41 14.1 8787 8112 7949 7376 6876 1/2 769 0.60 16.9 10078 9484 9342 8914 8560 7424 3/4 882 0.90 22 10078 9484 9342 8914 8560 7424 3/4 882 0.90 22 11061 10519 10385 9996 9736 8847 7570 1 968 1.20 26 3 Days 12683 12211 12092 11747 11521 10901 10090 9019 1 1 2 1110 1.80 31 13951 13522 13414 13095 12889 12374 11734 10955 9980 2 1221 2.40 36 13351 13030 12950 12708 12510 12015 11376 10705 9980 8065 2 1260 2.46 38 15173 14891 14820 14609 14468 14036 13586 13022 12446 11176 3 1432 3.53 49 10572 8812 8290 1/3 481 0.41 12.1 12220 10729 10328 8958 1/2 556 0.63 14.9 13802 12520 12156 11035 10205 3/4 628 0.90 18.2 15253 14135 13798 12824 12111 9875 1 694 1.23 20 15253 14135 13798 12824 12111 9875 1 694 1.23 20 17407 16519 16198 15316 14753 13170 1 1 2 792 1.80 27 3 Days 19121 18388 18096 17259 16736 15389 13871 2 870 2.40 34 17429 16877 16739 16313 16003 15059 13876 12427 10502 2 967 2.40 33 19935 19452 19331 18968 18721 18044 17147 16121 15045 11743 3 1106 3.60 40 23810 23405 23304 23001 22799 22277 21711 21007 20233 18473 5 1321 6.00 59 12744 10191 9283 1/3 369 0.40 12.6 14712 12605 11980 1/2 426 0.61 16.3 16646 14868 14327 12592 10507 3/4 482 0.90 20 18408 16849 16388 14900 13752 1 533 1.22 21 18408 16849 16388 14900 13752 1 533 1.22 22 20998 19701 19302 18053 17182 14193 1 1 2 608 1.81 26 3 Days 23243 22131 21771 20682 19906 17893 2 673 2.41 31 26455 25479 25235 24298 23664 21961 20125 16908 3 766 3.61 40 31324 30500 30294 29630 29095 27738 26299 24797 22915 5 907 5.95 56 24197 23301 23090 22471 22059 20878 19377 17765 15725 3 800 3.60 31 28764 28010 27822 27286 26939 26072 25063 23863 22589 19606 5 951 6.00 43 17349 14214 13047 1/2 341 0.61 12.3 19995 17450 16655 13052 3/4 393 0.93 15.5 21827 19513 18907 16322 13506 1 429 1.21 19.3 21827 19513 18907 16322 13506 1 429 1.21 19.3 24981 22990 22460 20671 19129 1 1 2 491 1.81 22 27474 25681 25206 23761 22529 18065 2 540 2.41 24 3 Days 31442 29875 29484 28236 27395 24703 20285 3 618 3.61 29 37344 36025 35695 34700 33991 32220 29911 26937 22215 5 734 6.05 39 28700 27492 27190 26184 25479 23333 20969 17480 3 634 3.62 33 34132 33116 32862 32100 31530 30047 28205 26350 24136 5 754 6.01 44 39021 38132 37910 37244 36800 35546 34248 32623 30989 27200 7 1 2 862 9.01 54 22867 19233 18136 3/4 299 0.91 13.4 25161 21986 21010 1 329 1.21 15.6 28832 26243 25408 22802 19924 1 1 2 377 1.82 19.0 28832 26243 25408 22802 19924 1 1 2 377 1.82 19.0 31662 29444 28684 26374 24628 2 414 2.41 22 36250 34402 33873 31882 30526 26145 3 474 3.61 30 5 Days 42980 41422 41032 39618 38498 35655 32079 5 562 6.03 40 33776 31946 31609 30565 29698 26933 3 526 3.62 38 39684 38044 37683 36823 36250 34451 32025 28547 5 618 6.02 52 45591 44164 43807 42943 42444 41121 39515 37449 34796 7 1 2 710 9.02 63 50022 48721 48396 47487 47032 45895 44548 43085 41129 35732 10 779 12.0 75 30561 27858 27152 24458 21479 1 1 2 348 1.81 25 33635 31095 30577 28558 26588 2 383 2.41 28 38465 36115 35664 34128 32978 28368 3 438 3.60 34 45754 43590 43208 42072 41233 38708 34835 5 521 6.01 47 5 Days 45754 43590 43208 42072 41233 38708 34835 5 521 6.01 47 52253 50358 49884 48855 48192 46261 43933 40629 35715 7 1 2 595 9.00 56 57873 56163 55735 54653 54054 52537 50625 48395 45470 10 659 12.0 70 48947 45342 44616 41829 39112 3 324 3.61 30 58465 55195 54588 52646 51074 45737 5 387 6.03 39 66773 63726 63155 61559 60428 56986 51688 7 1 2 442 9.01 50 5 Days 73421 70649 69945 68496 67529 64622 60962 55889 10 486 12.0 57 84449 82039 81436 79872 79030 76927 74244 71276 67313 15 559 18.1 75 Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). *Speed (RPM) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : free inlet hemispherical sone levels. 67 SE, SS, SCE, SCS, SE, SS, SCE, SCS

SE, SS, SCE, SCS, SE, SS, SCE, SCS 68 Performance for SCE, SCS Level 3L Exhaust and Supply Level 24 3L 30 3L 36 3L 42 3L 48 3L 54 3L 60 3L 72 3L CFM / Static Pressure in inches wg Motor Fan Max Sones Quick uild 0.1.2.25.375.5.625.75 1 HP RPM HP @ F est vailable 5704 5156 4346 3836 1/3 828 0.40 14.6 6531 6070 5474 5073 3825 1/2 948 0.60 18.0 7475 7092 6622 6349 5463 3/4 1085 0.90 21 3 Days 8225 7892 7469 7253 6527 5677 1 1194 1.20 24 9585 8388 6798 1/2 695 0.60 16.6 10964 9966 8700 7988 3/4 795 0.90 20 12067 11169 10081 9486 7440 1 875 1.20 23 13818 13038 12168 11672 10388 1 1 2 1002 1.80 28 3 Days 15211 14504 13762 13329 12162 10837 2 1103 2.40 32 17404 16786 16159 15835 14881 13842 12738 11164 3 1262 3.60 40 14577 12834 10267 3/4 630 0.90 21 16034 14528 12409 1 693 1.20 24 18348 17064 15395 14424 1 1 2 793 1.80 28 20199 19058 17658 16812 14506 2 873 2.41 32 3 Days 23092 22127 21006 20343 18470 16315 3 998 3.61 39 27372 26559 25670 25194 23837 22246 20647 5 1183 6.01 51 18297 15764 1 536 1.20 18.1 20925 18692 16364 14566 1 1 2 613 1.80 21 23042 21097 19068 17750 2 675 2.40 25 3 Days 26387 24729 22864 22051 18935 3 773 3.61 31 31269 29920 28347 27517 25762 23038 5 916 6.01 42 26730 23117 1 1 2 531 1.80 24 29448 26249 22640 2 585 2.41 27 33676 30972 27904 26301 3 669 3.61 32 3 Days 39918 37729 35144 33810 30464 5 793 6.01 41 45707 43860 41690 40528 37736 34664 7 1 2 908 9.02 50 29752 26685 22822 2 425 2.41 22 34092 31897 28420 26637 3 487 3.62 28 40393 38690 35716 34451 30778 5 577 6.02 38 5 Days 46203 44715 42720 41165 38347 34940 7 1 2 660 9.01 49 50894 49542 48191 46850 43846 41235 37872 10 727 12.0 61 36192 31785 23150 2 363 2.42 22 41377 37510 32117 27497 3 415 3.62 28 49054 45784 42555 40364 30638 5 492 6.02 36 5 Days 56133 53276 50438 49031 43088 34085 7 1 2 563 9.03 46 61816 59221 56632 55354 52119 44587 10 620 12.1 56 50891 41519 26696 3 338 3.60 27 60376 53221 42331 35746 5 401 6.01 37 69109 63324 55204 49816 35555 7 1 2 459 9.02 45 5 Days 76035 70697 63628 60117 47224 10 505 12.01 54 87026 82239 77299 73547 64621 53266 42050 15 578 18.00 72 Performance SCE, SCS Level 3H Exhaust and Supply CFM / Static Pressure in inches wg Motor Fan Max Sones Quick uild Level 0.1.2.25.375.5.625.75 1 HP RPM HP @ F est vailable 5518 5046 4531 4251 3338 1239 1/3 968 0.40 16.7 24 3H 6317 5917 5466 5244 4621 3734 1589 878 1/2 1108 0.60 20 7229 6881 6498 6301 5800 5243 4536 2159 917 3/4 1268 0.90 23 3 Days 7958 7643 7306 7126 6684 6208 5685 5051 1966 1 1396 1.20 26 8610 7863 7098 6696 5288 1/2 890 0.60 19.1 9848 9190 8544 8201 7277 5927 3/4 1018 0.90 23 30 3H 10845 10242 9665 9362 8572 7667 6305 1 1121 1.20 26 12412 11886 11375 11122 10458 9762 8982 7921 1 1 2 1283 1.80 34 3 Days 13660 13182 12712 12483 11898 11279 10645 9926 7863 2 1412 2.40 39 15634 15216 14798 14596 14096 13579 13041 12487 11270 3 1616 3.60 47 13442 12239 10951 10296 7708 3/4 786 0.90 21 14793 13713 12595 11952 10148 6816 1 865 1.20 24 36 3H 16948 16024 15038 14565 13209 11486 8916 1 1 2 991 1.81 29 18641 17801 16902 16471 15285 14101 12341 9976 2 1090 2.41 35 3 Days 21343 20609 19850 19449 18503 17426 16390 15077 10981 3 1248 3.60 43 25311 24692 24073 23751 22909 22117 21253 20313 18538 5 1480 6.01 58 17185 15919 14411 13492 10692 1 736 1.20 27 19660 18600 17329 16671 14556 11992 1 1 2 842 1.80 31 42 3H 21645 20721 19576 18987 17308 15214 12754 2 927 2.40 36 3 Days 24774 23980 23026 22526 21236 19699 17881 15890 3 1061 3.61 44 29397 28728 28011 27590 26536 25446 24224 22881 19615 5 1259 6.01 57 25650 23608 21313 20083 15959 1 1 2 691 1.80 31 28249 26368 24434 23316 20084 15370 2 761 2.41 35 48 3H 32332 30648 29133 28230 25779 22761 19268 3 871 3.61 43 3 Days 38308 36841 35553 34913 33002 30995 28669 25923 16703 5 1032 6.00 59 43876 42596 41415 40859 39461 37668 35918 34068 29382 7 1 2 1182 9.01 75 29370 27282 24696 23254 18049 2 501 2.41 26 33591 31765 29731 28536 25299 20153 3 573 3.61 31 54 3H 39864 38325 36748 35851 33382 30664 27125 21725 5 680 6.02 41 5 Days 45609 44264 42919 42229 40269 38025 35671 33163 23604 7 1 2 778 9.03 53 50182 48959 47737 47126 45432 43599 41507 39367 33873 10 856 12.03 61 34870 31476 27574 25189 2 453 2.40 27 39950 36909 33845 32059 26478 3 519 3.61 32 60 3H 47340 44661 42374 40977 37234 32691 25081 5 615 6.01 42 5 Days 54190 51775 49746 48747 45736 42385 38434 33206 7 1 2 704 9.01 54 59656 57462 55532 54624 52131 49309 46183 42537 31181 10 775 12.02 63 49824 45755 41527 39012 29847 3 465 3.61 37 59039 55683 52112 50384 44927 37456 5 551 6.00 52 72 3H 67611 64754 61587 60049 56106 51062 44626 36346 7 1 2 631 9.01 65 5 Days 74361 71806 68944 67504 64053 60168 55291 49391 10 694 12.00 77 85183 82953 80547 79290 76179 73186 69826 65974 55871 15 795 18.04 104 Performance certified is for installation type : Free inlet, Free outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). *Speed (RPM) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per MC International Standard 301. Values shown are for installation type : free inlet hemispherical sone levels.

CF Direct Drive Cement block fans are designed for economy and reliability in small size, high volume applications. Efficient propeller, venturi, and motor design results in low sound levels with minimal restriction to airflow. Works great for ventilating equipment rooms, plumbing and electrical chases. CF ll dimensions are in inches. 10.5 irflow 15.625 7.625 Standard Construction Housing - galvanized steel Fits in place of a standard 16 by 8 inch concrete block Mountable in any wall construction Mounting flanges for easy installation Grille - galvanized steel UL/cUL Recognized motor 18.5 12.0 Performance for CF est vailable Program In Stock mps CF-205-QD 1.0 CFM / Static Pressure in inches wg 0.1.125.25.375.4 CFM 500 465 453 390 320 300 Sones 8.3 8.3 8.1 7.8 7.5 9.4 69 For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative. www.greenheck.com Sidewall Propeller Exhaust Fans

SFD, SF 70 Utility and Centrifugal SF est vailable Program 5 Days SFD UL/cUL 705 Power Ventilators E40001 - SFD and SF Greenheck Fan Corporation certifies that the SFD and SF shown herein are licensed to bear the MC seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and comply with the requirements of the MC Certified Ratings Program. SFD Direct Drive and SF elt Drive Centrifugal forward-curved utility fans are designed for applications requiring low to medium air volumes and pressures. Standard Construction SFD SF Housing - heavy-gauge steel, lock-seam Wheel - aluminum Wheel - steel, aluminum Corrosion-resistant fasteners all bearing motor - 1/4 hp and larger djustable motor plate djustable motor pulley Permatector protective powder coating Options and ccessories SFD SF Damper Speed control Isolators - base Weatherhood Multiple discharge positions - eight elt guard Shaft seal with aluminum rub ring Guards - inlet, outlet Flanges - inlet, outlet Lube lines Drain connection ccess door - bolted, hinged Dual drives Relubricatable bearings Decorative or protective powder coating Certified for high wind and seismic applications UL/cUL Listed Power Ventilators www.greenheck.com Utility Centrifugal Fans For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

SFD C F SF 9 C E F SF 10 through 30 C E F SFD, SF G G G H H H D E D D Dimensions for SFD C D E F G H 6 14 11 16 16 11 1 4 11 8 3 16 5 1 4 6 9 1 16 7.5 14 5 16 18 1 16 13 11 16 12 1 4 8 1 8 5 1 4 8 9 5 8 9 17 7 8 20 5 16 15 13 16 13 3 4 10 3 8 6 1 4 10 10 3 4 10 19 3 8 24 5 16 18 5 8 16 1 4 11 3 8 6 3 4 12 12 3 4 ll dimensions are in inches. Dimensions for SF C D E F G H 9 20 24 16 7 8 14 1 4 15 1 2 6 5 8 10 13 3 4 10 22 26 5 8 19 3 8 16 7 8 15 1 2 8 1 2 11 15 1 8 12 22 1 2 28 3 8 21 3 8 16 7 8 15 1 2 9 13 15 1 8 15 32 5 8 31 1 4 23 3 8 18 7 8 21 3 4 12 3 4 15 3 8 16 5 8 18 36 7 8 42 30 7 8 25 1 8 22 17 3 4 19 1 4 22 3 8 20 37 46 33 5 8 27 3 8 23 3 4 15 7 8 21 1 8 24 1 2 22 39 5 8 52 1 2 36 3 4 30 3 4 24 17 1 2 23 28 3 4 25 41 1 2 57 3 4 40 3 8 33 5 8 25 19 1 2 25 7 8 31 1 2 27 46 61 1 8 44 37 5 8 27 21 3 8 28 1 2 33 71 30 48 1 4 68 48 3 4 41 1 8 27 23 3 8 31 3 4 36 5 8 ll dimensions are in inches. Performance for SFD HP RPM CFM / Static Pressure in inches wg.25.5.75 1 1.25 1.5 2 2.5 Max HP Sones @.25 Quick uild est vailable 6 7.5 9 10 1/6 1140 338 0.06 6.0 1/4 1725 628 541 424 0.24 12.8 1/6 1140 612 467 0.16 9.8 1/2 1725 1028 949 869 775 636 0.59 18.6 1/4 860 748 487 0.18 7.8 1/2 1140 1097 957 782 0.46 14.9 1 1 2 1725 1765 1683 1595 1502 1407 1298 989 1.64 29 1/3 860 1176 965 0.36 11.3 3/4 1140 1653 1528 1378 1163 0.86 18.5 3 1725 2603 2525 2444 2362 2275 2179 1942 1621 3.03 37 5 Days 5 Days 5 Days 5 Days Performance certified is for installation Type : Free inlet, Ducted outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The MC Certified Ratings Seal applies to air performance only.

SFD, SF 72 Performance for SF RPM / Static Pressure in inches wg Max Sones Quick uild CFM.25.5.75 1 1.25 1.5 2 2.5 3 3.25 HP @.25 est vailable 360 644 0.03 6.3 460 681 891 0.08 6.8 560 728 930 1090 1225 0.19 7.5 660 780 966 1129 1264 1382 0.28 8.5 760 838 1013 1166 1303 1422 1528 0.39 9.8 9 860 909 1064 1207 1340 1461 1568 1758 0.58 11.1 5 Days 960 983 1118 1256 1378 1498 1608 1798 1965 0.82 11.1 1060 1059 1174 1306 1426 1534 1644 1837 0.78 12.0 1260 1216 1318 1417 1528 1631 1728 1911 1.01 14.2 1360 1297 1392 1482 1583 1682 1777 1949 1.14 15.7 1460 1378 1468 1554 1639 1736 1827 1998 1.31 17.3 600 526 0.05 5.6 790 575 730 0.12 6.2 980 633 777 897 1013 0.30 7.1 1170 693 828 944 1045 1144 0.45 8.3 1360 760 887 994 1092 1181 1263 1430 0.81 9.9 10 1550 828 946 1049 1142 1229 1309 1456 1603 1.17 11.1 5 Days 1740 898 1009 1109 1196 1279 1357 1499 1629 1.37 11.4 1930 973 1077 1169 1256 1332 1407 1546 1.43 12.4 2120 1050 1145 1232 1316 1393 1461 1596 1.69 13.8 2310 1128 1214 1299 1376 1452 1522 1647 1.97 15.3 2500 1207 1285 1368 1441 1512 1581 2.04 17.1 825 455 0.07 5.7 1065 493 631 0.18 6.3 1305 533 665 773 871 0.40 7.1 1545 580 703 806 897 983 1061 0.71 8.2 1785 632 743 844 931 1010 1087 1225 1.09 9.6 12 2025 686 789 883 969 1045 1116 1251 1373 1.56 11.0 5 Days 2265 747 837 925 1008 1083 1152 1278 1399 1.84 11.8 2505 809 889 971 1048 1122 1190 1314 1.87 13.0 2745 873 943 1019 1093 1162 1230 1.91 14.5 2985 937 1001 1071 1140 1205 2.08 16.1 3225 1002 1062 1124 2.08 17.8 1560 395 508 0.25 6.0 1860 421 529 619 0.43 7.5 2160 450 554 638 716 0.67 9.9 2460 481 580 663 734 803 865 1.09 10.9 2760 514 608 688 759 822 884 1.32 11.5 15 3060 549 637 715 784 846 903 1013 1.90 12.7 5 Days 3360 585 668 742 810 871 928 1031 1128 2.58 14.1 3660 623 701 772 837 897 953 1053 1147 2.98 15.9 3960 662 734 802 865 924 979 1078 1166 3.40 17.8 4260 701 768 834 895 951 1005 1103 1191 3.88 18.9 4560 742 804 867 925 980 1032 1129 3.89 20 2725 364 464 550 0.60 8.4 3150 388 481 563 635 0.93 10.3 3575 415 500 578 648 712 1.33 11.1 4000 444 524 596 662 725 782 1.80 12.0 4425 473 548 615 680 738 795 898 2.60 13.6 18 4850 503 573 638 698 756 809 910 1001 3.54 15.5 5 Days 5275 534 601 662 719 774 826 923 1013 3.99 17.7 5700 566 630 687 743 793 844 938 1026 4.46 19.2 6125 599 660 714 767 817 863 956 1039 4.95 20 6550 631 689 743 791 840 886 974 4.81 22 6975 664 720 771 818 865 909 992 5.38 24 3275 320 402 0.53 8.1 3800 343 420 487 0.90 10.3 4325 369 440 503 561 613 1.61 11.3 4850 396 462 521 576 628 676 2.19 12.3 5375 424 485 542 594 642 689 2.56 14.0 20 5900 454 511 564 614 661 704 788 3.64 16.1 5 Days 6425 484 537 587 634 679 722 801 877 4.89 18.6 6950 515 565 612 657 700 741 818 890 5.51 20 7475 546 593 638 681 722 761 836 904 6.20 22 8000 578 622 665 705 745 782 854 922 7.02 24 8525 610 652 692 731 769 805 875 940 7.89 26 Performance certified is for installation Type : Free inlet, Ducted outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The MC Certified Ratings Seal applies to air performance only.

Performance for SF RPM / Static Pressure in inches wg Max Sones Quick uild CFM.25.5.75 1 1.25 1.5 2 2.5 3 3.25 HP @.25 est vailable 4000 285 359 419 0.83 8.6 4950 315 385 441 491 535 1.67 11.3 5900 350 410 467 514 557 598 2.52 14.1 6850 388 441 491 540 582 620 691 755 4.56 17.2 7800 428 475 520 564 608 646 713 776 834 861 6.75 21 22 8750 470 511 552 593 632 671 739 798 854 881 8.14 24 5 Days 9700 512 550 587 624 660 695 764 824 877 9.24 27 10650 555 590 623 658 691 724 789 850 10.00 30 11600 599 631 662 693 724 755 813 874 11.82 34 12550 643 672 701 730 759 788 844 898 13.80 38 13500 688 714 742 768 794 822 875 14.80 42 6000 246 310 363 412 1.65 8.4 6950 263 324 375 419 463 2.42 10.3 7900 283 338 387 431 470 508 3.34 12.1 8850 304 354 401 444 482 518 585 4.93 14.1 9800 326 372 416 457 495 530 593 654 6.81 16.1 25 10750 349 391 432 471 508 542 605 660 716 743 9.57 18.4 5 Days 11700 373 412 450 487 522 556 617 672 722 748 10.74 21 12650 397 433 468 504 537 569 629 684 734 11.62 23 13600 421 455 488 521 553 584 643 696 746 13.21 25 14550 445 478 510 539 570 600 657 709 13.43 27 15500 471 501 531 559 588 617 671 723 15.26 29 Performance certified is for installation Type : Free inlet, Ducted outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The MC Certified Ratings Seal applies to air performance only. 73 SFD, SF, Typical Installations Utility Fans Typical Installations General Clean ir or Fume Hood (Non Grease) The SFD, SF and SW are designed for applications ranging from clean air to contaminated air. Installations must include a means for inspecting, cleaning and servicing the exhaust fan. Flex Connection Flex Connection SWD and SW, Commercial Kitchen (Grease) The SWD and SW Series 200 and 300 are designed to meet restaurant and foodservice applications. These fans are UL and cul Listed for grease removal and have been tested under elevated temperature conditions. Due to high temperatures and grease-laden airstreams in commercial kitchen ventilation, system designers must be aware of governing codes and guidelines. The National Fire Protection ssociation (NFP) is the primary source used by many local codes for commercial kitchen ventilation systems. Local code authorities should be consulted before proceeding with any kitchen ventilation project. Installation must include a means for inspecting, cleaning and servicing the exhaust fan. Fans selected for grease removal must include a weatherhood, access door and 1-inch (25 mm) drain connection. For grease applications where the fan is mounted indoors, the welded scroll option must be selected. n outlet guard is strongly recommended when the fan discharge is accessible. When an outlet guard is not ordered with the fan, it must be provided by the installer. n upblast discharge is recommended. No dampers are to be used in the system. The fan discharge must be a minimum of 40 inches (1016 mm) above the roof line and the exhaust duct must be fully welded to a minimum distance of 18 inches (457 mm) above the roof surface. Upblast Discharge Optional Companion Flange Three wheel diameters UL/cUL 762 Power Ventilators for Restaurant Exhaust ppliances - MH11745 - SWD SW Series 200 SW Series 300 Inlet box and curb cap are used when space is limited and a 90º turn is required less than three wheel diameters from the inlet. Weatherhood Curb Cab Inlet ox **40 in. Weatherhood (1016 mm) Three wheel diameters ** Per NFP 96 the fan discharge must be a minumum distance of 40 in. (1016 mm) above the roof surface. Duct from Kitchen Hood *18 in. (457 mm) * Per NFP 96 the duct must be all welded construction to a minumum distance of 18 in. (457 mm) above the roof surface.

SWD SWD Direct Drive Centrifugal backward-inclined utility fans are designed for applications requiring medium to high air volumes and pressures. The wheel design provides the ability to build pressure without overloading. Scroll is galvanized non-painted construction Offered exclusively with Vari-Green electronically commutated motors for energy efficiency and ease of control. Performance Capacities range from 800 to 5,860 cfm up to 2.5 in. wg of static pressure. Standard Construction Housing - heavy-gauge steel, lock-seam 74 est vailable Program UL/cUL 705 Power Ventilators E40001 - SWD UL/cUL 762 Power Ventilators for Restaurant Exhaust ppliances - MH11745 - SWD Greenheck Fan Corporation certifies that the SWD shown herein is licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and comply with the requirements of the MC Certified Ratings Program. Vari-Green motor - 80% turndown, 85% efficient Wheel - aluminum Corrosion-resistant fasteners all bearing motor - 1/4 hp and larger Weatherhood Options and ccessories Welded scroll construction luminum construction Wheel rotation - clockwise or counterclockwise Damper Isolators - base Multiple discharge positions - eight Inlet vane damper Shaft seal with aluminum rub ring Guards - inlet, outlet Drain connection ccess door - bolted, hinged Flanges - inlet, outlet, companion Decorative or protective powder coating UL/cUL Listed Power Ventilators UL/cUL Listed Power Ventilators for Restaurant Exhaust ppliances Stock Select sizes and models with the Vari-Green motor are available in stock.

SWD 7 through 10 SWD 13 through 18 C E F C E F SWD G G D D Dimensions for SWD C D E F G 7 23 1 4 26 5 8 18 3 4 16 7 8 12 1 8 9 3 4 11 8 23 1 4 26 5 8 18 3 4 16 7 8 12 1 8 9 3 4 11 10 23 1 4 26 5 8 18 3 4 16 7 8 12 1 8 9 3 4 11 13 25 3 4 31 1 4 23 3 8 19 3 8 13 3 4 10 5 8 14 15 27 34 3 4 25 3 4 21 1 8 13 3 4 11 5 8 15 7 8 16 28 38 1 8 28 22 3 8 13 3 4 12 3 4 17 1 2 18 29 1 2 42 30 7 8 22 3 8 13 3 4 14 1 8 19 1 4 ll dimensions are in inches. 75 Performance for SWD 7 8 10 13 15 16 18 HP RPM CFM / Static Pressure in inches wg.25.5.75 1 1.25 1.5 1.75 2 2.25 2.5 Max HP Sones @.25 1/4 1725 535 493 437 380 308 0.17 12.4 1/2 2500 802 778 750 721 689 648 603 566 523 477 0.52 23 1/4 1725 713 630 534 405 0.15 10.5 1/2 2500 1092 1039 984 926 864 796 716 625 520 0.46 17.6 1/4 1725 1283 1168 1047 921 785 0.27 14.7 3/4 2200 1691 1602 1512 1422 1324 1226 1123 1018 882 0.56 21 1/4 1200 1382 1191 964 0.19 9.3 1/2 1550 1874 1739 1591 1427 1246 0.41 13.6 3/4 1725 2115 1995 1870 1731 1581 1419 1230 0.57 16.0 1/2 1150 1905 1671 1416 0.29 10.5 3/4 1400 2412 2224 2027 1818 1605 0.52 14.0 1 1725 3053 2896 2746 2592 2422 2252 2080 1906 0.98 19.5 3/4 900 2054 1754 1394 0.26 8.8 1 1300 3173 2983 2795 2573 2328 2078 0.79 16.1 2 1725 4324 4176 4033 3890 3748 3593 3422 3241 3052 2863 1.85 26 3/4 850 2880 2510 2060 0.40 9.8 1 950 3302 2964 2631 2162 0.56 11.9 2 1300 4734 4487 4240 3994 3765 3496 3157 1.44 20 Quick uild est vailable Performance certified is for installation Type - Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories). The MC Certified Ratings Seal applies to air performance only.

SW 76 Series 100 Series 200 Series 300 UL/cUL 705 Power Ventilators E40001 - SW Series 100 SW Series 200 SW Series 300 UL/cUL 762 Power Ventilators for Restaurant Exhaust ppliances - MH11745 - SW Series 200 SW Series 300 UL/cUL Power Ventilators for Smoke Control Systems MH17511 - SW Series 200 SW Series 300 UL/cUL 705 Listed is standard on In Stock SW Series 200 models. Greenheck Fan Corporation certifies that the SW Series 100, 200 and 300 shown herein is licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and comply with the requirements of the MC Certified Ratings Program. Greenheck Fan Corporation certifies that the SW Series 300 F shown herein is licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and Publication 311 and comply with the requirements of the MC Certified Ratings Program. est vailable Program SW Series 200 s 210, 212, 216 and 224 In Stock SW Series 100 and 200 5 Days SW Series 300 SW elt Drive Series 100, 200 and 300 Centrifugal backward-inclined utility fans are designed for applications requiring medium to high air volumes and pressures. The wheel design provides the ability to build pressure without overloading. Series 100 Scroll is galvanized non-painted construction Drive frame has Permatector protective powder coating Series 200 Entire fan has Permatector protective powder coating Heavier duty shaft, bearings and material thickness Series 300 Entire fan has Permatector protective powder coating olted and reinforced heavy-gauge galvanized steel drive frame ackward-inclined wheels are constructed of steel irfoil wheels are constructed of aluminum and feature welded blades Standard Construction Series 100 Series 200 Series 300 Housing - heavy-gauge steel, lock-seam Wheel - aluminum Wheel - aluminum, steel Corrosion-resistant fasteners all bearing motor - 1/4 hp and larger Weatherhood ccess door - hinged Flange - outlet djustable motor plate djustable motor pulley Options and ccessories Stock Series Series Series 100 200 300 Inlet box (sizes 206 through 224) Welded scroll construction luminum construction Wheel rotation - clockwise or counterclockwise luminum wheel Damper Isolators - base Multiple discharge positions - eight Inlet vane damper Weatherhood Shaft seal with aluminum rub ring Guards - inlet, outlet Heat slinger Lube lines Drain connection ccess door - bolted ccess door - bolted, hinged Flanges - inlet, outlet, companion Dual drives Relubricatable bearings Performance baffle Stainless steel shaft Decorative or protective powder coating Certified for high wind and seismic applications UL/cUL Listed Power Ventilators UL/cUL Listed Power Ventilators for Restaurant Exhaust ppliances UL/cUL Listed Power Ventilators for Smoke Control Systems

C E F SW G H D Dimensions for SW Series 100 Series 100 C D E F G H 106-110 23 1 2 26 5 8 18 3 4 16 7 8 15 1 2 9 3 4 11 15 1 8 113 30 1 8 31 1 4 23 3 8 18 7 8 21 3 4 10 5 8 14 16 5 8 115 31 1 4 34 3 4 25 3 4 21 1 8 21 1 2 11 5 8 15 7 8 18 1 2 116 32 3 8 38 1 8 28 22 7 8 21 1 2 12 3 4 17 1 2 20 3 8 118 34 42 30 7 8 25 22 14 1 8 19 1 4 22 3 8 120 37 46 33 5 8 27 3 8 23 3 4 15 3 8 21 1 8 24 1 2 124 41 1 2 57 3 4 40 5 8 33 5 8 25 19 25 7 8 31 1 2 77 Dimensions for SW Series 200 Series 200 C D E F G H 206-210 22 26 5 8 18 3 4 16 7 8 15 1 2 8 1 4 11 15 1 8 212 22 9 10 28 3 8 21 3 8 16 7 8 15 1 2 9 5 8 13 15 1 8 213 30 1 8 31 1 4 23 3 8 18 7 8 21 3 4 10 5 8 14 16 5 8 215 31 1 4 34 3 4 25 3 4 21 1 8 21 1 2 11 5 8 15 7 8 18 1 2 216 32 3 8 38 1 8 28 22 7 8 21 1 2 12 3 4 17 1 2 20 3 8 218 34 42 30 7 8 25 22 14 1 8 19 1 4 22 3 8 220 37 46 33 5 8 27 3 8 23 3 4 15 3 8 21 1 8 24 1 2 222 39 5 8 52 1 2 36 7 8 30 1 2 24 17 23 28 3 4 224 41 1 2 57 3 4 40 5 8 33 5 8 25 19 25 7 8 31 1 2 Dimensions for SW Series 300 Series 300 C D E F G H 327 52 7 16 61 3 4 46 1 4 35 3 4 30 21 7 16 32 33 330 58 3 16 68 1 4 50 3 4 38 1 2 33 3 8 23 13 16 35 1 4 36 5 8 333 60 9 16 74 9 16 55 9 16 41 9 16 33 3 8 26 3 16 38 1 4 40 336 63 5 16 82 3 4 61 45 5 16 33 3 8 28 15 16 42 44 1 2 340 66 1 4 89 3 16 66 13 16 49 5 16 33 3 8 31 7 8 46 47 344 75 98 5 8 73 3 8 53 7 8 38 3 16 35 1 4 50 1 2 52 349 78 1 2 108 5 16 80 5 16 58 3 8 38 3 16 38 3 4 55 57 ll dimensions are in inches.

SW 78 Performance for SW Series 100 CFM RPM / Static Pressure in inches wg.25.5.75 1 1.25 1.5 2 2.5 3 3.5 Max HP Sones @.25 Quick uild est vailable In Stock 100 936 1273 1542 0.06 5.4 106 260 1550 1681 1830 1993 2155 2318 2614 2880 0.45 8.0 5 Days 500 2775 2858 2931 0.44 22 140 891 1198 0.04 4.5 107 320 1372 1531 1686 1848 2005 2156 2432 2684 0.40 7.3 5 Days 740 2852 0.50 23 200 860 1148 0.04 5.5 108 700 1699 1849 1989 2119 2242 2361 2589 2796 0.63 10.3 5 Days 1200 2728 0.52 23 500 898 1094 1264 0.10 8.5 800 1192 1356 1496 1621 1736 1849 2054 0.45 9.7 110 1250 1688 1813 1924 2031 2130 2222 2394 2551 0.87 14.2 5 Days 1400 1859 1976 2080 2179 2274 2362 2526 0.85 16.0 2000 2571 2652 0.96 27 700 767 939 0.09 5.4 1100 1009 1147 1269 1378 1482 1580 0.41 7.4 113 1500 1283 1391 1494 1591 1680 1766 1922 2073 0.94 10.0 5 Days 2300 1860 1940 2014 2085 2153 2222 2352 1.43 18.1 2700 2154 2228 2293 2356 1.36 22 1000 737 879 0.13 6.2 1500 955 1078 1183 1276 1360 1445 0.56 8.2 115 2000 1196 1294 1389 1474 1552 1625 1759 1883 1.24 11.1 5 Days 3000 1698 1776 1847 1911 1973 2037 2156 1.91 19.0 3500 1956 2024 2090 2150 1.86 24 1200 625 750 0.15 5.4 1920 854 949 1039 1120 1192 1259 0.71 8.1 2280 979 1061 1141 1216 1287 1352 1470 1576 1.38 10.1 116 2640 1107 1182 1250 1320 1385 1448 1564 1666 1762 1.93 12.7 5 Days 3720 1501 1560 1615 1667 1716 1764 1863 1955 2.70 19.6 4440 1768 1821 1869 1916 1960 2002 2.77 27 4800 1903 1953 1999 2.65 31 1500 545 667 0.19 5.6 2300 717 806 887 969 1044 0.71 7.7 2700 808 892 964 1032 1103 1170 1.01 9.1 118 3100 902 980 1047 1109 1169 1229 1349 1.55 10.9 5 Days 3500 997 1070 1135 1191 1247 1301 1407 1513 2.19 13.1 4700 1291 1351 1405 1457 1505 1550 1631 2.85 20 5500 1491 1544 1593 1640 2.80 24 1800 471 591 0.22 6.5 2250 528 633 728 811 0.56 6.6 120 3150 658 743 820 892 962 1028 1145 1.57 7.9 3600 723 807 877 943 1006 1068 1184 1287 2.24 9.0 5 Days 4500 861 937 1001 1057 1113 1166 1257 2.33 13.1 6300 1151 1207 1262 1316 2.71 21 2800 413 0.19 4.9 4000 517 588 651 0.74 7.5 5200 629 691 744 795 843 1.62 11.0 124 6400 746 800 849 893 935 976 1055 3.15 14.7 5 Days 7600 867 913 958 999 1037 1073 1144 1209 4.79 18.0 8200 927 971 1013 1053 1090 1125 1192 4.64 20 8800 989 1030 1070 1108 1144 1178 4.49 23 Performance certified is for installation type : Free Inlet, Ducted outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The MC Certified Ratings Seal applies to air performance only.

Performance for SW Series 200 CFM RPM / Static Pressure in inches wg.5 1 1.5 2 2.5 3 3.5 4 4.5 5 Max HP Sones @.5 Quick uild est vailable In Stock 70 1201 0.03 6.4 120 1262 1722 2079 0.16 6.8 206 220 1489 1868 2203 2497 2760 2997 3216 0.61 8.0 5 Days 420 2422 2567 2721 2907 3108 3313 0.74 13.7 570 3196 3303 0.67 22 200 1098 1458 0.10 6.2 280 1244 1549 1808 2060 0.27 7.3 207 440 1591 1855 2064 2259 2446 2618 2777 2941 3103 3255 1.07 10.0 5 Days 920 2909 3034 3156 3282 1.17 28 1000 3142 3255 1.11 30 250 1125 0.04 7.0 370 1270 1610 1909 2172 0.26 7.7 208 610 1640 1918 2160 2378 2575 2755 2941 3121 3289 0.91 9.2 5 Days 1210 2790 2951 3110 3263 0.98 19.9 1450 3282 0.91 26 625 1158 1501 1809 0.27 6.3 800 1311 1583 1846 2106 2334 0.58 7.4 210 1150 1661 1872 2063 2250 2431 2615 2805 2982 3148 3305 1.65 10.0 5 Days SW-210-LMDX-QD 2200 2885 2996 3104 3214 3329 1.95 22 2375 3096 3201 3300 1.82 25 600 1022 1372 0.16 6.0 850 1150 1447 1710 1941 0.45 7.2 212 1350 1522 1728 1913 2113 2291 2457 2625 2783 2931 3071 1.79 10.5 5 Days SW-212-LMDX-QD 2850 2874 2968 3067 3169 2.23 27 3100 3108 3199 2.17 30 1000 998 1287 0.24 6.9 1840 1457 1619 1778 1931 2093 2249 1.32 11.5 213 2120 1629 1775 1913 2051 2181 2318 2462 2596 2730 2.31 13.7 5 Days 3240 2355 2457 2555 2650 2744 2832 2.83 23 3800 2729 2817 2.53 29 1200 886 1157 0.29 6.9 1550 1009 1214 1421 0.56 8.2 215 2600 1458 1591 1715 1840 1958 2083 2213 2333 2456 2.83 13.8 5 Days 4350 2290 2374 2456 2.97 26 4700 2460 2.72 30 1200 762 0.15 5.9 2100 970 1147 1322 1487 1632 1.30 8.5 216 3000 1256 1381 1505 1629 1749 1874 1994 2106 2211 3.33 12.2 5 Days SW-216-LMDX-QD 4800 1884 1967 2042 2124 2200 2277 2355 4.60 22 5700 2208 2279 2348 4.19 28 2000 762 963 1136 0.75 10.1 2500 862 1023 1185 1330 1459 1.58 10.1 218 3500 1092 1211 1327 1443 1557 1672 1779 1878 1971 2060 4.43 13.6 5 Days 6500 1869 1938 2002 2065 2131 5.49 31 7000 2003 2067 2128 5.18 34 2000 647 860 0.51 8.7 3300 836 970 1104 1243 1367 1480 2.58 10.6 220 4600 1072 1171 1267 1364 1461 1556 1658 1754 1845 5.23 15.2 5 Days 7200 1583 1650 1711 1777 1840 1900 6.30 28 8500 1846 1904 1960 6.38 36 2500 602 783 949 0.93 9.3 4000 768 892 1019 1137 1241 1347 1452 3.42 11.2 222 5500 976 1065 1158 1249 1339 1432 1918 1898 1674 1746 6.51 15.8 5 Days 8500 1424 1485 1542 1601 1659 1719 1780 7.78 29 10000 1655 1708 1760 6.87 36 3000 526 699 0.71 7.4 5700 760 856 945 1036 1126 1221 1309 4.72 12.4 224 6600 851 936 1015 1093 1171 1251 1329 1411 1487 6.98 14.5 5 Days SW-224-LMDX-QD 9300 1139 1200 1261 1320 1378 1433 1489 7.87 24 12000 1440 1486 1534 7.89 34 Performance certified is for installation type : Free Inlet, Ducted outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The MC Certified Ratings Seal applies to air performance only. 79 SW

SW 80 Performance for SW Series 300 ackward-inclined Wheel 327 330 333 336 340 344 CFM RPM / Static Pressure in inches wg Quick uild.5 1 2 3 4 5 est vailable 5000 551 663 841 9500 871 934 1074 1194 1299 1395 14000 1233 1276 1361 7000 531 630 782 911 12000 799 855 978 1085 1180 1266 17000 1093 1132 1210 7500 440 535 686 821 15000 727 779 880 980 1070 1150 22500 1046 1081 1152 7500 362 454 606 17500 631 680 777 869 951 1026 27500 944 976 1041 12500 391 460 575 671 21250 589 629 710 791 863 928 30000 801 832 889 15000 350 413 517 25000 516 554 629 704 770 829 35000 695 723 777 832 20000 339 391 483 560 349 32500 497 529 594 658 717 45000 666 690 736 Performance certified is for installation type : Free inlet, Ducted outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound power level ratings shown are in decibels, referred to 10-12 watts, calculated per MC Standard 301. Values shown are for inlet Lwi sound power levels and inlet hemispherical sone levels for installation type : Free inlet, Ducted outlet, calculated per MC Standard 301. The MC Certified Ratings Seal applies to air performance only. Performance for SW Series 300 F irfoil Wheel 327-F 330-F 333-F 336-F 340-F 344-F CFM RPM / Static Pressure in inches wg Quick uild.5 1 2 3 4 5 est vailable 6000 664 755 906 9500 953 1019 1139 1247 1340 1433 13000 1260 1311 1406 8000 631 709 839 957 12000 875 933 1039 1136 1219 1301 16000 1131 1176 1263 9000 541 613 742 14000 766 820 916 1005 1088 1167 19000 1002 1046 1125 12000 521 583 693 792 17000 688 737 825 905 981 22000 862 903 977 1045 15000 480 535 632 720 22500 677 712 784 853 918 30000 880 908 15000 376 433 532 25000 563 598 670 736 797 856 35000 762 789 839 20000 365 413 499 349-F 30000 506 539 604 665 721 775 40000 656 681 730 779 Performance certified is for installation type : Free inlet, Ducted outlet. Power rating (hp) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound power level ratings shown are in decibels, referred to 10-12 watts, calculated per MC Standard 301. Values shown are for inlet Lwi sound power levels and inlet hemispherical sone levels for installation type : Free inlet, Ducted outlet, calculated per MC Standard 301. The MC Certified Ratings Seal applies to air performance and Lwi values only.

UL/cUL 705 - E40001 - CSW 33 through 73 IDW, FDW UL/cUL 762 Power Ventilators for Restaurant Exhaust ppliances - MH11745 - CSW-I UL/cUL Power Ventilators for Smoke Control Systems MH17511 - CSW-I Greenheck Fan Corporation certifies that the CSW sizes 33 through 73, IDW and FDW shown herein are licensed to bear the MC seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and MC Publication 311 and comply with the requirements of the MC Certified Ratings Program. MC Licensed Sound and ir Performance is found in Greenheck s Performance Supplements: CSW Single-Width 00.CVI.1030 R1 7-2013, Single-Width Cent Fan Supp R Rev 1 February 2004 and Double-Width 00.CVI.1001 R3 1-2012 CSW s 33 through 73 IDW, FDW Through size 54 Up to Class II vailable Fall 2014 CSW s 7 through 33 est vailable Program CSW Single-Width and IDW, FDW Double-Width Series 21 and 41 Centrifugal fans are designed for clean or contaminated ventilation applications up to 200 F. Units can be mounted (both indoor or outdoor) in ducted inlet and/or ducted outlet installations such as exhaust air, supply air, filtration, comfort conditioning, light industrial processes, fume exhaust, fluid bed pressurization and combustion air. Performance CSW-I capacities range from 50 to 48,000 cfm CSW-F capacities range from 1,400 to 50,000 cfm IDW capacities range from 1,300 to 94,000 cfm FDW capacities range from 3,000 to 95,000 cfm Up to 8.5 in. wg of static pressure. Standard Construction Housing - heavy-gauge steel Series 21 - PermaLock Series 41 - welded Rotatable housing (sizes 7 through 30) Final assembly vibration analysis Minimum bearing life of L 10 80,000 hours (verage life - L 50 400,000 hours) Permatector protective powder coating Options and ccessories Guards - inlet, outlet Totally enclosed belt guard (with Greenheck supplied motor & drives) ccess door - bolted, hinged Spark resistant construction Spark C resistant construction Motor cover (rrangement 9) Shaft seal (rrangements 1, 9, 10) Shaft guard (rrangement 3) Extended lube lines Flanges - inlet, outlet, companion Extended life bearings Weatherhood (rrangement 10) Protective powder coating Drain connection UL/cUL Listed Power Ventilators Isolators - sizes 7 through 30, rrangement 10, Class I only Isolation base with motor slide base rrangements 1, 3* UL/cUL Listed Power Ventilators for Restaurant Exhaust ppliances UL/cUL Listed Power Ventilators for Smoke Control Systems * rrangements 1 and 3 must be mounted on an Isolation ase. See Greenheck s Isolation ase information on page 124 for additional details or visit www.greenheck.com Housing Construction Series 21 PermaLock Housing Features Greenheck s exclusive airtight PermaLock seam. This seam provides a structural bond between the side panels and scroll wrap. 81 CSW, IDW, FDW Series 41 Welded Housing Features a fully welded housing. For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative. www.greenheck.com Industrial Centrifugal Fans

CSW-FRP 82 rrangement 10 est vailable Program 15 Days Greenheck Fan Corporation certifies that the CSW-FRP shown herein is licensed to bear the MC seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and comply with the requirements of the MC Certified Ratings Program. MC Licensed ir Performance is found in Greenheck s CSW-FRP catalog, 00.CVI.1026 R1 6-2010 Discharge Positions CSW-FRP elt Drive Fiberglass fans are designed to provide reliable and efficient operation for corrosive applications. Our products feature hand layup and chop spray manufacturing and comply with STM C582 and D4167 specifications for fiberglass laminates and blowers. Standard Construction Housing - fiberglass reinforced plastic Wheel - backward curved single-width, fiberglass reinforced plastic Drive frame - steel, coated Unpunched outlet Connection - slip fit inlet Spark resistant construction Weatherhood Options and ccessories Drain connection ccess door - bolted, hinged Isolators - base Teflon plate shaft seal Multiple discharge positions - five D E C F G TH H Dimensions for CSW-FRP 15 Class TH H U TU U TH U TU U H C D E F G 33 29 5 8 29 3 8 36 1 2 28 1 2 24 3 4 26 1 2 24 1 2 30 3 4 35 1 2 24 15 3 4 11 3 4 14 18 I, II, 41 1 2 37 5 8 37 3 8 45 7 8 36 3 4 29 31 1 8 29 1 2 36 5 16 41 3 4 24 18 5 8 13 7 8 18 22 III, IV 45 9 16 40 5 8 40 5 16 51 39 5 16 35 1 4 37 3 8 35 1 2 44 3 8 44 13 16 24 22 5 8 16 7 8 20 25 52 3 4 47 1 8 46 5 8 58 1 2 45 1 2 40 3 8 43 1 2 40 7 8 51 51 7 16 28 26 19 5 8 24 ll dimensions are in inches. U U TU Corrosion Resistance No steel parts exposed to the airstream. Resin specially formulated for resistance to corrosive chemicals. Nexus Veil (a synthetic cloth) layering is optional for the most severe applications, such as hydrogen fluoride and strong oxidizers. Ultraviolet (UV) resistant top coat. ll surfaces exposed to UV rays are stabilized against ultraviolet degradation, suitable for outdoor installation. C Veil or Nexus One oz. material Two oz. chopped strand material Chopped strand material Chopped strand material Two oz. chopped strand material C Glass Veil UV Inhibitor Top Coat Standard Lamination Sequence Interior Exterior www.greenheck.com Fiberglass Reinforced Plastic Fans For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

Centrifugal Fans - Selection Guide Fan Width Single-Width (SW) Single-Inlet, Single-Outlet Used in a wide range of applications Contaminated air, elevated temperatures, moisture content, kitchen exhaust, fume exhaust Typically used in ducted-in / ducted-out applications, but can be unducted at either end as needed Double-Width (DW) Double-Inlet, Single-Outlet Generally used for high volume applications or air handlers Clean air applications only due to bearings being located in the airstream Typically applied as free inlet - ducted outlet Spark Resistant Construction Spark C - Includes aluminum inlet cone and rub ring Spark - Includes aluminum wheel and rub ring Spark - ll airstream parts constructed from aluminum Consult factory for availability. RRNGEMENT 10 SINGLE-WIDTH ackward-inclined or irfoil Wheel rrangement 10 is the most common fan arrangement. Motor is mounted on the fan under the bearing pedestal and can be enclosed with a motor cover, limited motor frame sizes, smallest overall package size. No mounting base required. Rotation Choice between clockwise (CW) and counterclockwise (CCW) as determined from the drive side. Rotation changes discharge location as illustrated below. Motor Positions (rrangements 1 & 3 only) Z Fan X/Y CCW Discharge Positions Motor position determined from the drive side. Letter assignment is independent of discharge position and fan rotation. Utility Fans - determined from the drive side. Some models and sizes allow for field rotation. CCW TH CCW TD W CW TH CW TD CCW H CCW U CW CW H CW U 83 Centrifugal Fans - Selection Guide RRNGEMENT 9 SINGLE-WIDTH ackward-inclined or irfoil Wheel CCW D CCW D CW D CW D CCW U CCW TU CW U CW TU Motor is mounted on the side of the bearing pedestal, limited motor frames sizes, smaller overall size than arrangement 1. No mounting base required. Centrifugal Fans - graphic shows discharge positions available on Quick uild centrifugal fans. Determined from the drive side. Some models and sizes allow for field rotation. RRNGEMENT 1 SINGLE-WIDTH ackward-inclined or irfoil Wheel H U U TU TH Wheel Types ISOLTION SE Requires an isolation base (by factory) or structural pad to mount the fan and motor. See page 124 for more details. ackward-inclined Wheel Centrifugal, non-overloading style with single-thickness flat blades. Most versatile wheel. Excellent for clean, high-temperature, or contaminated air. RRNGEMENT 3 SINGLE-WIDTH ND DOULE-WIDTH ackward-inclined or irfoil Wheel SINGLE WIDTH DOULE WIDTH ISOLTION SE Double-width (when compared to single-width) can supply an equal amount of air with a smaller wheel diameter resulting in lower overall unit size. earing located in the airstream limits temperatures and does not permit spark resistant construction. Requires an isolation base (by factory) or structural pad to mount the fan and motor. See page 124 for more details. irfoil Wheel Centrifugal, non-overloading style with airfoil shaped blades. Higher operating efficiencies. Used for clean air applications. CSW-FRP Wheel Non-overloading style with backward curved blades. Laid up by hand. The blades are strapped to the backplate. The backplate and hub are made of steel and encapsulated in fiberglass reinforced plastic (FRP).

IPO, IPW, IP Radial lowers IPO, IPW and IP elt Drive Open and Radial Tip Industrial fans are engineered and built for reliable operation in harsh environments where high static pressures and material handling requirements are encountered. Performance IPO and IPW capacities range from 800 to 20,000 cfm IP capacities range from 1,500 to 22,000 cfm Up to 22 in. wg of static pressure 84 Greenheck Fan Corporation certifies that the IPO, IPW and IP shown herein are licensed to bear the MC seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and comply with the requirements of the MC Certified Ratings Program. MC Licensed ir Performance is found in Greenheck s catalog, Industrial Process Fans Catalog Supplement, October 2002 s 13 through 19 rrangements 1, 9 and 10 est vailable Program Standard Construction Fully welded scroll housing Wheel - welded, heavy-gauge steel open radial material handling wool, backplate type material handling industrial air handling Minimum bearing life of L 10 80,000 hours (verage life - L 50 400,000 hours) vailable in arrangements 1, 9 and 10 Final assembly vibration analysis Permatector protective powder coating Options and ccessories Guards - inlet, outlet, shaft Structural base for isolation Totally enclosed belt guard ccess door - bolted, quick opening Flanges - inlet, outlet, companion Shaft seal Drain connection Extended lube lines Isolators Weatherhood (rrangement 10) Structural base with motor slide base* Decorative or protective powder coating * rrangement 1 only must be mounted on structural base with motor slide base. See Greenheck s Structural ases information on page 124 for additional details or visit www.greenheck.com Wheel Types Industrial Process Open Wheel Open material handling wheels are suitable for material handling such as wood chips, abrasives and dust. Industrial Process Wool Wheel The wool wheel, or backplate material handling wheel, is designed for handling long, fibrous, stringy material such as paper or yarn. Industrial Process ir Handling Wheel ir handling wheels are designed for applications ranging from clean air exhaust to light material handling. www.greenheck.com Industrial Process Fans For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

Plenum Plenum Direct and elt Drive Plenum fans are designed for clean air handling applications where the fan operates unhoused within a pressurized plenum with airstream temperatures up to 200 F. The compact size of the plenum fan makes it an excellent selection for retrofit and replacement applications and in variable air volume systems. elt Performance Capacities up to 210,000 cfm and 12 in. wg of static pressure. Standard Construction Wheel - aluminum, airfoil, 12-bladed Heavy-gauge spun inlet cone Minimum bearing life of L 10 80,000 hours (verage life - L 50 400,000 hours) Direct Final assembly vibration analysis Options and ccessories Protective cage est vailable Program Guard - inlet, shaft Totally enclosed belt guard Inlet collars, flanges, and screens Extended lube line kit Extended life bearings 85 Decorative or protective powder coating Mounting rrangement Typical Installation RDIL XIL Horizontal* elt Drive 1, 3 Horizontal** Motor on Frame (Top) 3, 9 RDIL elt Drive XIL RDIL Horizontal** Motor on Frame (Side) 3, 9 elt and Direct Drive Vertical and Horizontal Direct Drive 4 * rrangement 1 & 3 units with horizontal mounting must be mounted on an isolation base. **Not available with isolation base. For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative. www.greenheck.com Plenum Fans

Vektor -H Laboratory Exhaust Systems Vektor -H Vektor-H models use a conical outlet nozzle to accelerate the exhaust to a high velocity. This provides the exhaust with additional momentum for displacement high above the roof. The Vektor-H is a curb-mounted, self-contained unit, so installation time is reduced by eliminating costly field fabricated inlet and outlet duct. The optional bypass air plenum and damper accommodates constant and variable volume laboratories. Housing Style Stack Style Minimum Flow Maximum Flow Maximum ESP Inline Centrifugal High Plume Nozzle 270 cfm (459 m³/hr) 24,000 cfm (40,776 m³/hr) Up to 3.5 inches wg (875 Pa) 86 est vailable Program 15 Days UL/cUL 705 Power Ventilators E40001 - Vektor-H UL 762 Power Ventilators for Restaurant Exhaust ppliances - MH11745 - Vektor-H Greenheck Fan Corporation certifies that the Vektor-H shown herein is licensed to bear the MC seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and Publication 311 and comply with the requirements of the MC Certified Ratings Program. MC Licensed Sound and ir Performance is found in Greenheck s Vektor-H Performance catalog, 00.L.N002 R2 1-2012 Standard Construction Galvanized steel construction LabCoat - a two-part electrostatically applied coating elt drive configuration Designed and guaranteed to withstand 125 mph wind load ratings Constant speed drives Premium efficient, totally enclosed fan cooled motors, Class F insulation, VFD compatible Spark resistant construction Minimum bearing life of L 10 100,000 hours luminum wheel and shaft seal UL/cUL Listed Power Ventilators Options and ccessories NEM-3R disconnect Roof curb (12-, 18-, or 24-inch high) ypass air plenum - bottom or side inlet Factory mounted actuators - manual, electric Isolation dampers ypass dampers UL Listed Power Ventilators for Restaurant Exhaust ppliances OSHPD Seismic Certification Custom height stack extensions Performance for Vektor-H 9 in. 10 in. 12 in. 13 in. 16 in. 18 in. 22 in. 24 in. 30 in. 36 in. Minimum CFM 270 450 600 810 1050 1320 1650 2760 3690 5310 Maximum CFM 1750 1800 2640 3160 7080 7880 10560 14760 19640 24000 Plume Rise at 3000 (ft./min.) Minimum (ft.) 14 15 16 17 18 19 20 22 24 26 Maximum (ft.) 19 19 20 21 25 26 30 33 37 42 Performance certified is for installation type : Free Inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories). Power rating (hp) does not include transmission losses. Plume rise calculated assuming a 10 mph crosswind. 3,000 ft./min. is the minimum recommended outlet velocity per NSI Z9.5. The MC Certified Ratings Seal does not apply to plume rise. For a full range of fan performance, consult the Laboratory Exhaust Systems, Vektor-H Performance Supplement. (00.L.N002 R2 1-2012) www.greenheck.com Vektor -H For comprehensive product information, including performance, access the product catalog found on www.greenheck.com or contact your local Greenheck representative.

Why use Greenheck Vektor Laboratory Exhaust Systems? The main objective of a laboratory exhaust system is to remove hazardous or noxious fumes from a laboratory, dilute the fumes as much as possible and expel them from the lab building so that the fumes do not contaminate the roof area nor are re-entrained into the building makeup air system. Greenheck Vektor laboratory exhaust systems offer the following benefits: Significant plume rise without unsightly exhaust stacks that detract from the buildings aesthetics Significant dilution of laboratory exhaust effluent, reducing contaminant concentration Inline or side inlet centrifugal arrangements Reliable drive systems Efficient and quiet blower technology How Vektor High Plume Dilution Technology Works... Laboratory exhaust is drawn into the Vektor fan (). The exhaust is discharged into the Vektor multistage induction nozzle and ambient dilution air is induced into the Vektor windband (). The laboratory exhaust plus induced dilution air is discharged at a high velocity into the atmosphere (C). pplication to constant or variable volume exhaust systems Efficient discharge nozzle design Safe and easy maintenance Multiple fan assemblies on a factory provided common plenum Meets NSI Z9.5, NFP-45, and SHRE lab design guidelines Energy recovery options available LabCoat for Laboratory Exhaust pplications ypass ir Damper LabCoat corrosion-resistant coating is electrostatically applied uniformly in two Hi-Pro Polyester steps after an advanced surface preparation involving a multi-stage chemical wash. This 4-6 mils Total cleaner surface results in better coating adhesion and durability. Step 1: zinc-rich epoxy primer is applied and partially cured Step 2: The finish coat of polyester resin (Hi-Pro Polyester) is applied and then fully cured at 400ºF (204ºC) ypass ir ase Steel Laboratory Exhaust Zinc-rich Primer (70% zinc) Isolation Damper Optional bypass air plenum dvanced Surface Preparation LabCoat is not affected by the UV component of sunlight (does not chalk) and has superior corrosion resistance to acid, alkali, solvents, and harsh environments (high humidity, coastal applications). The LabCoat system exceeds 4000 hour STM 117 Salt Spray Resistance several times that of other corrosion-resistant coatings commonly offered. C 87 Vektor -H Salt Spray STM 117 Durability *Chemical Resistance Ratings Hours 1000 2000 3000 4000 Pencil Hardness STM D3363 Cross-Hatch dhesion STM D3359- leach Sulfuric cid (10%) HCI (10%) MEK Chlorine (0.1%) Na0H (20%) 0 0 0 1 0 1 Permatector 3H No Failure 0 - No effect Hi-Pro Polyester 2H No Failure 1 - Slight change in gloss or color Perma-Z 3H No Failure 2 - Surface etching, severe staining, but film integrity remains 3 - Significant pitting, cratering, swelling, or erosion with LabCoat 2H No Failure obvious surface deterioration * For additional chemical resistance of Hi-Pro Polyester, see Greenheck s Product pplication Guide F/110-04R4, Performance Coatings for Ventilation Products

Type I Grease Hoods Kitchen Ventilation Type I Grease Hoods Type I hoods are designed for use above grease-producing equipment and are available in several styles and configurations. Number Code est vailable GH - E - W Program Hood shipment based on accessories and hood type shown* NSF Greenheck Type I Hoods are UL 710 Listed. Filter GH - affle Filter GX - Grease-X-Tractor GG - Grease Grabber GK - High Velocity Cartridge Filter Make-Up ir Style Configuration E - Exhaust Only W - Wall Style Canopy D - Exhaust Only, V - Single-Island Style Double-Wall Front (V-ank) Canopy F - Face Supply Type I Hoods Recommended pplication 88 5 D Y S 10 D Y S 5 D Y S 10 D Y S Wall canopy hoods are used over cooking equipment that produce heat and grease-laden effluent. They are intended to be used when the cooking equipment is placed against a wall. Single-Wall Front or Optional Double-Wall Front with one-inch of insulation between the two front panels that provides additional strength and rigidity. Supply air is introduced through ceiling diffusers or external supply plenums. Supply air is introduced horizontally through the face via perforated panels in a manner that does not interfere with the cooking operation beneath the hood(s), ensuring uniform distribution of air and limiting the throw to within several feet of the hood(s). Used over cooking equipment that produce heat and grease-laden effluent. Used over one row of cooking equipment placed where no walls exist and can be seen from all directions and have four finished (all stainless steel) sides available in both V-bank and single-bank filter configurations. Supply air is introduced through ceiling diffusers or external supply plenums. Product/ccessories - Hood shipment based on accessories chosen* Switches Light/Fan switches can be shipped loose or mounted on the hood face or utility cabinet. Lights Multiple lighting options are available. Screw in for incandescent or CFL light fixtures are standard. Recessed incandescent, recessed fluorescent and LED lights are also available. LED lights are environmentally friendly and low maintenance. ll fixtures are vapor proof and UL approved. Duct Collars, Factory Mounted Collars are fully welded to the exhaust plenum and include a 1-inch flange. Ship Loose Exhaust collars are included, but not mounted to the hood allowing the contractor to cut the opening and improve aesthetics. Filler Panels Stainless steel airspaces used to obtain required clearance to combustibles, to fill in open spaces. Enclosure Panels When the top of the hood is mounted lower than the finished ceiling height, enclosure panels can be provided to match your hood and fill in the space between the hood and ceiling. Exhaust ir alancing affle alances airflow between multiple duct or hood sections exhausted by a single main duct. SP/HSP/SP Supply Plenums Supply air back to the space evenly. Kitchen Fan Control Center (KFCC) Prewired control panel other than main power and connections to fan and lighting in the field. llows you to manage power from one location. Digital Temperature Interlock Temperature probe that detects heat from cooking and signals the fans to start. Controls available with and LED display. Trim Strips Stainless steel strips used where hood sections meet to improve aesthetics. Zero Clearance Top 1-inch insulated airspace provides clearance reduction to combustible/limited combustible surfaces. Double Shell 1-inch insulated stainless panel that provides a more aesthetic finish, and increased rigidity on consultant grade hoods. Finished ack Exposed stainless panel to finish the back of a wall canopy hood in instances where it is exposed. acksplash Panels Provides a cleanable stainless surface behind or on adjacent walls near the hood. End Skirts Full or mini, provide improved capture and performance. VSP Supply Plenum Supply air back to the space evenly. Utility/Fire Cabinets Hood or remote mounted for housing controls or fire systems. Fire Suppression Systems merex or nsul factory pre-piped fire suppression systems. Zero Clearance Sides and ack 1-inch insulated airspace provides clearance reduction to combustible/limited combustible surfaces. Vari-Flow ir Management System Matches exhaust airflow to cooking load by means of heat sensors. www.greenheck.com Kitchen Ventilation Systems

Grease Extraction Filtration Options Greenheck is the industry leader in grease filtration as verified by testing to STM F2519-2005 standards. This is crucial to the restaurant owner/operator because the grease generated by restaurant kitchens pose many problems; frequent duct cleaning, rooftop grease problems and compliance with tougher air emissions. Total kitchen exhaust includes all grease particulate sizes as well as grease vapors. Grease is the by-product of commercial cooking processes that must be extracted from the effluent airstream via the kitchen ventilation system. Filter Grease Grabber Multistage Filtration System Grease-X-Tractor Centrifugal Filtration High-Velocity Cartridge pplication Heavy to Extra Heavy Duty Grease Medium to Heavy Duty Grease Light Duty Grease Static Pressure (9 x 4 foot hood at 2050 cfm) 1.1 to 1.3 in. wg 0.7 to 0.8 in. wg 0.7 to 0.8 in. wg Grease Removal Efficiency at 8 microns Grease Removal Efficiency 3-10 microns 100% 99% 69% 51% 42% 21% Research and testing has determined that a significant concentration of grease particles can be found in the submicron and steam phases. Most currently applied grease extraction devices remove very large grease particulate that is 10 to 150 microns in size (spatter phase), but are not capable of removing fine particulates that are found in the submicron and steam phases. Spatter 6.2 to 150 microns Steam 0.55 to 6.2 microns Submicron.03 to 0.55 microns 89 Grease Extraction, Type II Heat and Condensate Hoods affle Light Duty Grease 0.5 to 0.6 in. wg 28% 16% Type II Heat and Condensate Hoods Type II hoods are designed to capture heat and/or condensate from non-grease producing appliances such as ovens and dishwashers. NSF Type II Hoods Recommended pplication Non-Filtered Heat and Fume Hoods GO Primarily used for ovens or general ventilation applications to capture heat and vapor, creating a more comfortable environment for the cooking staff. 5 Condensate Hoods The condensate hoods are available in three styles: Primarily used for dishwasher or condensate applications to capture heat and vapor, creating a more comfortable environment for the cooking staff. These hoods are constructed with a gutter and drain. D Y No affles GD1 Most economical and flexible in condensate applications. S Y Single-affle GD2 Designed for moderate condensation applications. Great for vertical door dishwasher applications. S Double-affle GD3 Designed for heavy condensate applications.

Controls and Energy Management 90 Controls and Energy Management Greenheck understands the importance of managing the various relationships between kitchen systems to ensure the best comfort, health and energy efficiency for your customers and employees. It is because we understand, that we provide engineered controls with many options to match your needs. Variable Volume Energy efficient kitchen ventilation systems are essential in reducing the operating costs associated with foodservice operations today. typical kitchen system will be designed for peak exhaust needs and operating at the exhaust airflow rate at all times. The reality is the cooking operation may only demand peak exhaust rates occasionally throughout the day. Vari-Flow ir Management System is our most economical variable volume system while providing 10:11:57 top energy savings. This system senses the heat LL LIGHTS LL FNS 100% CLEN TEMP INTERLOCK ON/OFF OVERRIDE HOOD INDICTOR output from the cooking operation to effectively INDIVIDUL INDIVIDUL UTO LIGHT ON/OFF FN ON/OFF TEMPERING modulate the airflow and offers exceptional 100 100 turndown and quick response. 75 75 50 50 25 25 0 0 The keypad with digital display or the integrated 1 2 3 4 1 2 EXHUST FN SUPPLY FN touchscreen, allows for increased flexibility in managing your kitchen environment and maximize savings. Vari-Flow also integrates easily with any building management system. FILL DETERGENT CLEN HOOD LIGHTS TEMPERTURE INTERLOCK UTO TEMPERING FN FN 100% SYSTEM FULT Temperature Interlock The temperature interlock is designed to automatically start the kitchen hood exhaust fans and keep them running while heat is being generated from the cooking appliances. The interlock will override the switch and start the fans once heat is detected in the event an operator fails to turn on the fans manually ensuring safety and code compliance. These systems are available as a stand-alone control or as an integrated option in our other pre-engineered controls. Digital Temperature Interlock includes a micro controller with LED display that can be remote mounted. This option provides easy access and accurate control when making seasonal adjustments to the temperature setting, eliminating the need to access the hood top. Fan Control Center The fan control center is a single source for managing all your kitchen ventilation products: fans, make-up air, hoods, fire system interlock, lighting and more. Pre-wired to your specifications and only minimal field wiring is needed, making installation easy. KFCC, Kitchen Fan Control Center, is designed to control the exhaust fans, supply fans and lights for the kitchen ventilation system. The KFCC has numerous options and can be interlocked with the fire suppression system.

External Supply Plenums Make-up air can be introduced several ways, including ceiling diffusers, through-the-hood with an integrated supply plenum or an external supply plenum. External supply plenums positioned around the perimeter of exhaust only hoods are a great alternative to integral supply plenums. Unlike integral supply plenums, they do not sacrifice valuable hood containment area. They can be retrofitted to almost any hood and are generally less expensive than integral plenums. Plenum Type SP ir Curtain Supply 14-inch or 24-inch Recommended Supply Rate (cfm/ft) 14-inch: Up to 110 24-inch: Up to 145 Recommended pplication Non-Tempered/Heat Only* To minimize mixing with air in the space by distributing airflow at the hood, downward. External Supply Plenums, Fire Suppression HSP Horizontal Supply Up to 150 Tempered ir (heated and cooling)* Provides supply air to mix with room air. SP ack Supply Up to 145 Non-Tempered or Marginally Tempered ir ir is kept near the hood to minimize mixing with air in the space. 91 VSP Variable Supply Face: Up to 160 Curtain: Up to 80 Non-Tempered or Marginally Tempered ir ir is kept near the hood to minimize mixing with air in the space. * Climate determines tempering conditions. Fire Suppression The first line of defense against fire in a commercial kitchen is the fire protection system installed in the exhaust hood. Greenheck has a variety of factory prepiped fire protection systems available from the two leading manufacturers, merex and nsul. merex Manufacturer / nsul Fire Suppression Category Description merex KP Wet chemical UL Listed nsul R-102 Wet chemical UL Listed nsul Piranha Dual-agent UL Listed merex Zone Defense Wet chemical UL Listed Flexibility in appliance placement attributed to overlapping spray protection nsul Overlapping Wet chemical UL Listed Provides a zone of protection where appliances are protected by an overlapping spray ppliance specific fire suppression is a wet chemical system to be used when the equipment placement is known and you expect few, if any, changes. Dual-agent provides a one-two punch by attacking it using the rapid flame knockdown and securing capabilities of PRX Liquid Fire Suppressant. Then, the superior cooling effects of water follow, cooling the cooking media below the reflash temperature within two minutes. The water also replenishes the foam blanket so that it can continue to act as a suppressant. Full flood/overlapping coverage restaurant fire suppression systems were developed to solve the real world problem of how to protect a kitchen where appliances are moved around, rolled in and out for cleaning, or replaced with different appliances to accommodate changing menus. Overlapping coverage systems are also cost-effective where a lot of protection is needed. The Restaurant Fire Suppression System is constructed in compliance with the following: National Fire Protection ssociation (NFP) ulletin #96 and #17 UL Standard 300 Listed UL Standard 2092 Listed (Piranha ) International ssociation of Plumbing and Mechanical Officials (IPMO) Interim Guide IGC 113-07 ISO 9001-2000

ERV, ERVe 92 Energy Recovery Ventilators Energy recovery ventilators precondition outdoor air to near room conditions. Fresh outdoor air flows through one side of the unit, while stale exhaust air from the building flows through the other side. n energy recovery wheel rotates between the two airstreams, transferring temperature and moisture properties. In the summer, this transfer reduces the temperature and moisture level of the outdoor air. Likewise in the winter, this transfer increases the temperature and moisture of the outdoor air. The overall effect is a significant reduction in the amount of energy used to condition the outdoor air. ERV The ERV is designed for indoor-mounted applications requiring 500 to 6,000 cfm of ventilation air. key design consideration for these units is mounting location. Several duct configurations allow for floor-mounted or ceiling-hung installation. ccess panels and optional hinged doors allow for easy access to the unit s wheel, filters, motors and controls. ERVe The ERVe is designed for outdoor-mounted applications requiring 1,000 to 6,000 cfm of ventilation air. The configurability of this unit allows for easy incorporation on rooftops or outdoor pad mounting scenarios. Hinged doors allow easy access to the unit s wheel, filters, motors and controls. pplication Energy recovery technology is well suited for commercial and institutional applications such as classrooms, offices, meeting rooms, condominiums and assisted living facilities. This diagram illustrate how energy recovery units can be used in conjunction with other HVC equipment. Fresh, outdoor air enters the energy recovery unit and is pretreated before entering the heating and cooling equipment. OUTDOOR IR IR HNDLING UNIT (HU) Heating Coil Cooling Coil RETURN IR Heating Coil Cooling Coil HU RETURN IR ENERGY RECOVERY VENTILTOR (ERV) Energy Wheel OUTDOOR IR Energy recovery wheels certified by the HRI ir-to-ir Energy Recovery Ventilation Equipment Certification Program in accordance with HRI Standard 1060. ctual performance in packaged equipment may vary. Certified Ratings are available in the Certified Product Directory. 72 F 50% 72 F 50% ZONE 1 ZONE 2 EXHUST IR Exhaust Fan RESTROOM est vailable Program Greenheck Fan Corporation certifies that the ERV and ERVe shown herein are licensed to bear the MC seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 211 and comply with the requirements of the MC Certified Ratings Program. enefits RELIEF IR Humidity control Reduced latent load on air conditioning equipment Improved indoor air quality of building Increased comfort of building occupants Reduced ventilation costs by as much as 75% producing year round energy savings Eliminates problems associated with high indoor moisture levels www.greenheck.com Energy Recovery Ventilators

Standard Construction ERV ERVe Galvanized steel construction (ERVe is double-wall) Total enthalpy wheel certified to HRI Standard 1060 Hinged doors One-inch foil face insulation Forward-curved fans Single-point wiring Motor starter Non-fused disconnect Fork-able base Options and ccessories Roof curb Double-wall construction 2-inch MERV 8 outdoor air and exhaust air filters Outdoor air and return dampers Listed to UL 1995 (open motors only) Enthalpy sensor (Economizer) Temperature sensor (Economizer) Timed exhaust and modulating wheel frost control Duct flanges Weatherhood Dirty filter sensor Service receptacle Permatector protective powder finish 93 ERV, ERVe Exhaust ir Intake Outdoor ir Discharge C Outdoor ir Intake Exhaust ir Discharge Dimensions for ERV Exterior Weight (lbs.) C ERV-10 46.1 33.7 27 300 ERV-20 62 51 31.1 720 ERV-45 67 67.1 44.4 1100 ERV-55 74.9 69.2 66 1470 ll dimensions are in inches. Weight includes dampers and filters. Outdoor ir Discharge Dimensions for ERVe Exterior C D E Weight (lbs.) Curb Outside Dimensions (in.) C D ERVe-20 65.8 49.6 45.1 17.8 20.8 940 61.10 x 40.35 ERVe-35 68.1 59.7 59.7 21.8 17.8 1270 63.35 x 55.48 Exhaust ir Intake E Exhaust ir Weatherhood Outdoor ir Weatherhood ERVe-45 72.1 65.9 65.9 21.8 19.2 1480 67.35 x 55.48 ERVe-55 83 72.3 72.3 21.8 23.9 1970 78.23 x 65.42 ll dimensions are in inches. Weight includes weatherhoods, dampers and filters.

MiniVent-450 and MiniVent-750 94 MiniVent-450 and MiniVent-750 The MiniVent is an energy recovery ventilator designed for indoor installations in commercial and institutional applications. The compact design provides an economical solution for individual spaces, such as school classrooms and small offices and may be floor mounted or ceiling hung. removable panel enables easy access to filters and enthalpy wheel. Performance Capacities range from 150 to 850 cfm and 1 in. wg of external static pressure. Standard Construction Galvanized steel construction Total enthalpy wheel certified to HRI Standard 1060 Forward-curved blower Gravity backdraft damper Single-point wiring 1-inch pleated filters Insulated Listed to UL 1995 Options and ccessories Intake and exhaust accessories - wall, roof mounted Speed control Motion detector (MiniVent-450 only) Isolators - hanging est vailable Program In Stock C Dimensions for MiniVent Exterior Weight (lbs.) C 450 49.8 28.3 17.3 150 750 45.1 35.1 21.6 250 ll dimensions are in inches.

Packaged Rooftop Ventilation Systems Energy recovery wheels certified by the HRI ir-to-ir Energy Recovery Ventilation Equipment Certification Program in accordance with HRI Standard 1060. ctual performance in packaged equipment may vary. Certified Ratings are available in the Certified Product Directory. est vailable Program 25 Days RV and RVE The RV and RVE (with energy recovery) are pre-engineered rooftop ventilators specifically designed to condition and deliver mixtures of outdoor and return air to a building. Pre-engineered features provide semi-custom flexibility while maintaining the quality, consistency, and value of a standardized product. pplication The RV(E) has been specifically designed to meet the challenges of introducing high percentages of outdoor air into a building. Features include minimizing energy consumption, control outdoor air volume, and maintain high levels of indoor air quality. This makes the RV(E) ideal for ventilation applications in which the supply air volume consists of 20% or more outdoor air. enefits Factory-mounted variable frequency drive for supply air volume control Outdoor and return air dampers for mixed air control Onboard microprocessor for precise temperature and humidity control Single source responsibility for all conditioning of outdoor air Performance Capacities range from 800 to 9,500 cfm and up to 3 in. wg of external static pressure. Standard Construction Double-wall galvanized steel construction with 2-inch insulation Hinged access doors Total enthalpy wheel certified to HRI Standard 1060 (RVE only) 2-inch MERV 8 and/or MERV 13 outdoor, supply and exhaust air filters Outdoor air and recirculated air dampers Direct drive backward-inclined plenum fan Microprocessor control Mounted and wired supply/exhaust fan variable frequency drive (VFD) Single-point wiring Non-fused disconnect Options and ccessories Roof curb luminum mesh outdoor air weatherhood Microprocessor remote interface Packaged direct expansion (PDX) or split DX coils Indirect gas-fired furnace Modulating hot gas reheat Room sensing options Wheel frost controls Rotation sensor CO 2 sensor Duct pressure sensor uilding pressure sensor Wheel economizer control Smoke detectors Dirty filter sensor Service receptacle Permatector protective powder finish 95 RV, RVE

DGK, DG, DGX 96 Make-Up ir Systems Direct Fired Gas Heat Housing DGK-15-25 DG-10-20 -30 DGX-12-22 -32 *DGX with PDX-12-22 -32 est vailable Program 5 Days 15 Days * est vailable based on size and capacity DGK, DG and DGX Direct Gas-Fired The DGK, DG and DGX are designed to provide heated make-up air for commercial and industrial applications. The ETL Listed direct gas-fired burner provides a 92% efficient heating system. Installation may be stand-alone or as a combination package with exhaust fan on a common curb. Performance Capacity is 15,000 cfm with up to 2 in. wg static pressure. Heating capacity up to 1,600,000 tu/hr available. Optional Evaporative Cooling - DG and DGX The evaporative cooling section includes a galvanized steel housing with a louvered intake, 2-inch aluminum mesh filters and a stainless steel evaporative cooling module. The evaporative cooling media is Munters CELdek and has a depth of 12 inches for 90% cooling effectiveness. Optional Packaged Direct Expansion (PDX) - DGX only The packaged DX cooling option is designed to cool the kitchen makeup air to a 70-75ºF supply air condition to improve space comfort and enhance employee productivity at an economical first cost. The PDX option includes integral condenser fans, condenser and evaporator coils, thermal expansion valves, and compressors. Standard Construction DGK DG DGX Galvanized steel construction Control center with starter and disconnect Vibration isolation Factory-wired and tested Options and ccessories DGK DG DGX V-bank filters irdscreen weatherhood luminum mesh filtered weatherhood Louvered weatherhood Thru-wall installation 100% outdoor air 80/20 recirculation Variable air volume Discharge temperature control Discharge temperature control with room override Discharge temperature control by external DDC signal Network interface Remote panel Evaporative cooling Packaged direct expansion (PDX) Outdoor air damper Discharge damper Duct liner insulation Double-wall construction Exhaust fan starter Dirty filter sensor Freeze protection Inlet air sensor Variable frequency drive (VFD) Service receptacle uxiliary contacts Gas pressure regulator Roof curb Duct adapter www.greenheck.com Commercial and Industrial Make-Up ir

Combination Packages DG, DGX The Greenheck combination kitchen package simplifies installation and reduces field labor costs. The preengineered design ensures that the supply fan, exhaust fan, curb and combination extension components interface properly. Equally important, Greenheck combination packages are specifically designed to comply with NFP 96. DGK, DG, DGX 40 inches minimum * maximum 10 ft. min. Combination Package - rrangement DC Housing rrangement DC * Width H10 185.7 35.5 DG H20 204.8 50.0 H30 227.0 58.8 H12 178.5 35.4 DGX H22 243.4 50.0 H32 268.9 65.1 ll dimensions are in inches and include a weatherhood and 2-inch filter section. *ased on largest available CUE exhaust fan. Stand-lone rrangements DGK, DG, DGX The DGK, DG and DGX are available for either downblast (rrangement D) or horizontal (rrangement HZ) discharge. n upblast discharge (rrangement U) is also available on the DGX. Downblast Discharge - rrangement D Housing rrangement D/HZ Width DGK H15 107.4 29.8 31.4 H25 136.0 39.0 49.5 H10 132.3 33.8 28.0 DG H20 148.8 33.8 37.0 H30 162.9 42.5 48.0 H12 131.5 39.0 33.7 DGX H22 174.2 44.9 44.1 H32 191.5 48.7 53.1 ll dimensions are in inches and include a weatherhood and 2-inch filter section. 97 Horizontal Discharge - rrangement HZ Thru-Wall Installation DGX The DGX is available with a pre-engineered, thru-wall installation option, which is ideal when roof penetration is not desirable. Thru-Wall Installation C Housing Thru-Wall Mount C Width H12 28.0 122 39 33.7 DGX H22 41.8 145 44.9 44.1 H32 63.1 160 48.7 53.1 ll dimensions are in inches. Thru-Wall Installation Option includes Weatherhood full downturn design with a generous intake area to minimize intake velocity and moisture entrainment. Thru-Wall Sleeve Filter Section Sleeve provides attachment interface between weatherhood and burner section. ccommodates walls up to 15 inches in depth. luminum mesh media filters outdoor air and strips fine mist from the air. drain pan weeps moisture out the front of the wall sleeve.

DGK, DG, DGX Dimensions for Packaged DX Cooling - DGX only D C Housing Packaged DX Cooling C D E H12 156 33.8 25.5 70 39 DGX H22 212 45 32 87 45 H32 237 52 35.5 99 49 ll dimensions are in inches. E 98

Indirect Fired Gas Heat Housing IGK-05-15 IG-10-20 -30 IGX-12-22 -32 *IGX with PDX-12-22 -32 est vailable Program 5 Days 15 Days * est vailable based on size and capacity IGK, IG and IGX Indirect Gas-Fired The IGK, IG and IGX feature an 80% efficient indirect gas-fired furnace(s) which are ETL Listed. Performance Capacities is 15,000 cfm with up to 2 in. wg static pressure. Heating capacity ranges from 75,000 to 1,200,000 tu/hr. Optional Evaporative Cooling - IG and IGX The evaporative cooling section includes a galvanized steel housing with a louvered intake, 2-inch aluminum mesh filters and a stainless steel evaporative cooling module. The evaporative cooling media is Munters CELdek and has a depth of 12 inches for 90% cooling effectiveness. Optional Packaged Direct Expansion (PDX) - IGX only The packaged DX cooling option is designed to cool the kitchen makeup air to a 70-75ºF supply air condition to improve space comfort and enhance employee productivity at an economical first cost. The PDX option includes integral condenser fans, condenser and evaporator coils, thermal expansion valves, and compressors. Standard Construction IGK IG IGX Galvanized steel construction Power vented Control center with starter and disconnect Vibration isolation Factory-wired and tested Direct spark ignition system Insulated double-wall furnace section construction Options and ccessories IGK IG IGX irdscreen weatherhood luminum mesh filtered weatherhood Louvered weatherhood 100% outdoor air Recirculation Variable air volume (VV) Staged control Modulating control Remote panel Network interface Evaporative cooling Packaged DX cooling V-bank filter section Outdoor air damper Discharge air damper Duct liner insulation Double-wall construction Exhaust fan starter Dirty filter sensor Freeze protection Inlet air sensor Variable frequency drive (VFD) Service receptacle uxiliary contacts Gas pressure regulator Roof curb Duct adapter luminum or stainless steel heat exchanger 99 IGK, IG, IGX www.greenheck.com Commercial and Industrial Make-Up ir

IGK, IG, IGX Dimensions for IGK, IG 10 ft. min. * maximum 34 inches 40 inches minimum Stand-lone - rrangement D/HZ Combination Package - rrangement DC Housing rrangement D/HZ Width H05 39.8 92.5 31.6 IGK H15 39.8 92.5 40.1 ll dimensions are in inches and include a weatherhood and 2-inch filter section. Housing rrangement DC * Width H10 182 48 IG H20 183 52.5 H30 181 52.5 ll dimensions are in inches and include a weatherhood and 2-inch filter section. *ased on largest available CUE exhaust fan. 100 Dimensions for IGX * maximum 10 ft. min. 40 inches minimum Stand-lone - rrangement D/HZ Combination Package - rrangement DC Housing rrangement D/HZ Width H12 127.1 39 44.6 IGX H22 155.1^ 45 44.6+ H32 172.3^ 48.7 52.2 ll dimensions are in inches and include weatherhood and 2-inch filter section. Housing rrangement DC * Width H12 174 44.6 IGX H22 224.3^ 44.6+ H32 249.4^ 52.2 ll dimensions are in inches and include a weatherhood and 2-inch filter section. *ased on largest available CUE exhaust fan. ^ The dimension is for units with only one furnace. dd 33.1 inches for each additional furnace. + Furnace section width is 44.6 inches for furnaces sizes 350 MH or less. Width is 53.9 inches for furnaces greater than 350 MH.

Dimensions for Packaged DX Cooling - IGX only D C Housing Packaged DX Cooling C D E H12 151.8 44.1 29.1 73.2 39 IGX H22 192.2 44.1 32.1 86.3 45 H32 216 52.2 35.3 100.1 48.7 ll dimensions are in inches. IGK, IG, IGX E 101

KSFD, KSF 102 est vailable Program 5 Days KSFD Direct Drive and KSF elt Drive - Untempered KSFD and KSF are designed to provide untempered make-up air for commercial and institutional kitchens. Installation may be stand-alone or on a combination curb with model CUE exhaust fan. Performance variety of blowers provide airflow capacities as high as 10,500 cfm with static pressures up to 2 in. wg. Standard rrangements KSFD and KSF have a compact design available with a horizontal discharge (arrangement HZ) or a downblast discharge (arrangement D). Installation may be as a stand-alone supply fan or a combination package with exhaust and supply fan on a common curb. Combination Packages The Greenheck combination package simplifies installation and reduces field labor costs. The pre-engineered design ensures that the supply fan, exhaust fan, curb and combination extension components interface properly. Equally important, Greenheck combination packages are specifically designed to comply with NFP 96. Kitchen Fan Control Center (KFCC) Prewired in compliance with the National Electrical Code, the KFCC simplifies field wiring, thereby reducing installation time and mistakes. The control center is a NEM Type 1 panel for mounting indoors. It is designed to interlock with the fire suppression system. Kitchen Supply Control Panel (KSCP) The KSCP offers safety and reliability for remote operation. The standard NEM Type 1 housing allows the panel to be mounted indoors. The panels can be provided with an optional kitchen hood light switch. Options and ccessories KSFD KSF Kitchen fan control center (KFCC) Kitchen supply control panel (KSCP) Roof curb Combo curb Duct adapter Damper Speed controller Extended weatherhood Horizontal or downblast discharge www.greenheck.com Kitchen Systems Make-Up ir

Dimensions for KSFD, KSF Stand-lone - Standard Weatherhood Housing rrangement D Width H05 40.8 14.5 19.8 H08 40.8 14.5 36.8 H15 80.3 22.3 31.8 H25 99.3 29.5 40.0 KSFD, KSF rrangement D rrangement HZ Housing rrangement HZ Width H05 31.5 18.5 19.8 H08 31.5 18.5 36.8 H15 71.0 25.3 31.8 H25 81.3 34.0 40.0 Stand-lone - Extended Weatherhood rrangement D Extended Weatherhood Option Housing rrangement D Width H05 130.0 18.5 19.8 H08 124.8 18.5 36.8 H15 145.3 25.3 31.8 H25 152.5 34.0 40.0 103 3 ft. Vertical Separation Combination Package - Standard Weatherhood * 40 inches minimum rrangement D3 3 feet minimum Housing rrangement D3 * Width* H05 70.0 25.0 H08 82.3 36.8 H15 131.5 42.8 H25 159.8 50.0 * Maximum dimension. ased on largest available CUE exhaust fan. 10 ft. Horizontal Separation Combination Package - Extended Weatherhood * 40 inches minimum rrangement DC 10 ft. min. Housing rrangement DC * Width* H05 159.3 25.0 H08 166.3 36.8 H15 196.5 42.8 H25 212.8 50.0 * Maximum dimensions. ased on largest available CUE exhaust fan. ll dimensions are in inches. Consult your representative for dimensional data when the evaporative cooling option is selected.

VFCD, VFC 104 Indoor ir Handlers est vailable Program est vailable based on size and accessories. Increased rigidity Formed access panels Excellent IQ Double-wall construction VFCD Direct Drive and VFC elt Drive Vertical fan coils provide a low-cost method of air conditioning and/or heating for applications requiring a small footprint. These units utilize a steel double-wall cabinet construction with hinged motor access. Performance Capacities range from 300 to 4,000 cfm and up to 1.5 in. wg (VFCD) or 3.3 in. wg (VFC). Standard Construction VFCD VFC Double-wall construction Side access panel - hinged, removable Internal isolation Stainless steel drain pan Easy slide-out motor and scroll Options and ccessories VFCD VFC Internal spring isolation Coils - hot water, chilled water, direct expansion and steam Prefilters - vertical, 2- or 4-inch, pleated or aluminum, 30 or 65% efficiencies Dimensions for VFCD, VFC Inlet Outlet C F G D E VFCD VFC VFCD VFC VFCD VFC 600 40 44 24 24 18 22 5.50 6.75 5.50 4.00 800 40 44 24 24 18 22 7.25 6.75 5.50 6.50 1300 44 24 28 18 22 18.00 8.50 5.63 8.00 1600 44 30 28 22 22 18.00 9.00 5.63 9.00 2000 52 34 28 29 23 26.00 10.00 5.63 9.00 2400 52 34 28 29 23 26.00 10.00 5.63 10.25 3000 52 50 32 45 22 32.88 12.75 10.38 12.00 ll dimensions are in inches. Less noise, less vibration Internal spring isolation (VFC) Quality ensures longevity Stainless steel drain pan VFCD Outlet Vertical irflow Option VFC Vertical irflow Option G F G F H Filter Projection 2 or 4 in. Horizontal Opposed irflow Option W Filter Projection 2 or 4 in. Easy slide-out motor and scroll (VFCD) Inlet irflow D E C Inlet irflow D E C www.greenheck.com Indoor ir Handlers and Fan Coils

Performance for VFCD, VFC (Nominal CFM) 600 800 1300 1600 2000 2400 3000 Fan/Motor Data RPM Range VFCD 960-1600 900-1500 870-1450 966-1610 660-1100 870-1450 660-1100 RPM Range VFC 1100-3500 1100-3500 800-2350 750-2000 725-2150 650-1900 500-1650 HP Range VFCD, VFC.25-2.25-2.25-2.25-2.25-3.25-3.25-3 Maximum HP - VFCD 3.8 3.8 7.8 9 7.8 5.6 7.1 Maximum HP - VFC 2.1 2.1 2.1 2.1 3.15 3.15 3.15 CFM Range - VFCD 250-770 250-950 700-1640 900-1640 900-2400 1300-3000 1300-4000 CFM Range - VFC 300-800 500-1300 800-1600 1300-2000 1300-2600 1300-3200 1300-4000 Filter Data Quantity - (in.) 1-20 x 24 1-20 x 24 1-20 x 24 1-24 x 24 2-16 x 25 2-16 x 25 2-24 x 24 rea - ft 2 2.7 2.7 2.7 3.6 4.7 4.7 6.7 Velocity - ft/min. 222 296 481 444 426 511 448 Coil Data rea - ft 2 2.7 2.7 2.7 3.6 4.7 4.7 6.7 Width - in. 22.5 22.5 22.5 22.5 24/25 24/25 22.5 Length - in. 17 17 17 23 27 27 43 Velocity - ft/min. 222 296 481 444 426 511 448 105 VFCD, VFC

LFC, MSCF LFC LFC and MSCF LFC and MSCF provide a low-cost method of air conditioning and/ or heating a building or specific space. These units come standard with a low-profile, double-wall constructed cabinet designed to fit in tight ceiling spaces. They utilize two types of forward-curved wheels providing a wide performance range and quiet operation. Performance Capacities range from 360 to 5,300 cfm and up to 4.5 in. wg. MSFC 106 est vailable Program est vailable based on size and accessories. Easy installation Modular construction (MSCF only) Quick, easy maintenance filter module Standard Construction Low-profile - as short as 11 inches (LFC) Modular construction (MSCF) Double-wall construction Two access panels per module Internal isolation Stainless steel drain pan Module Selection Pre and/or post access plenums (MSCF only) Prefilter (LFC, MSCF) Heating coils - hot water and steam Postfilters (MSCF only) Cooling coils - chilled water and DX Mixing box Reheat coils Options & ccessories Wheel - backward-inclined (MSCF only) Internal spring isolation Coils - hot water, chilled water, direct expansion and steam Prefilter - vertical or sloped, 2- or 4-inch, pleated or aluminum, 30, 65 or 95% efficiencies Mixing box - with or without dampers, with or without filters, inlet configuration any two of top, end, bottom, right or left Quality ensures longevity Stainless steel drain pan Less noise, less vibration Internal spring isolation Inlet Outlet Excellent IQ Double-wall construction Mix air evenly Mixing box module Increased rigidity Formed access panels Dimensions for LFC Inlet Outlet Without w/ 2 in. w/ 4 in. Width Height Width Height Width Filter Filter Filter 15 40 42 44 11.0 38 9.0 36 4.00 6.75 20 40 42 44 14.0 38 12.0 36 6.50 6.75 25 40 42 44 16.0 38 14.0 36 8.00 8.50 30 45 47 49 18.5 38 16.5 36 9.00 9.00 45 45 47 49 18.5 50 16.5 48 9.00 10.00 50 48 50 52 21.0 50 19.0 48 10.25 10.00 65 52 54 56 26.0 50 24.0 48 12.00 12.75 85 52 54 56 26.0 62 24.0 60 12.00 15.00 ll dimensions are in inches. www.greenheck.com Indoor ir Handlers and Fan Coils

Mixing ox Plenum Filter Heating Cooling Fan G LFC, MSCF C D E F Dimensions for MSCF Without Filter C D With Filter 12 in. 24 in. Vertical Sloped Hot Water 1 & 2 Row Hot Water and Steam 4 Row E F G Unit Width Inlet Outlet Height Width Height Width 15 11.0 24.5 12.75 24.5 12.75 24.5 12.75 15.5 24.5 25 11.0 38 9.0 36 4.0 6.75 20 14.0 24.5 12.75 24.5 12.75 24.5 12.75 15.5 24.5 25 14.0 38 12.0 36 6.50 6.75 25 16.0 27.0 12.75 24.5 12.75 27.0 12.75 15.5 24.5 29 16.0 38 14.0 36 8.0 8.50 30 18.5 31.0 12.75 24.5 12.75 31.0 12.75 15.5 24.5 32 18.5 38 16.5 36 9.0 9.00 45 18.5 32.0 12.75 24.5 12.75 32.0 12.75 15.5 24.5 32 18.5 50 16.5 48 9.0 10.00 50 21.0 32.0 12.75 24.5 12.75 32.0 12.75 15.5 24.5 38 21.0 50 19.0 48 10.0 10.25 65 26.0 38.0 12.75 24.5 12.75 38.0 12.75 15.5 24.5 42 26.0 50 24.0 48 12.0 12.75 85 26.0 38.0 12.75 24.5 12.75 38.0 12.75 15.5 24.5 42 26.0 62 24.0 60 12.0 15.00 ll dimensions are in inches. For complete dimensional information, see CPS submittal drawings. Performance for LFC, MSCF Unit 15 20 25 30 45 50 65 85 Nominal CFM 800 1100 1350 1600 2250 2600 3350 4300 Fan/Motor Data RPM Range 1100-3500 1100-3500 800-3050 750-2500 725-2400 650-2200 500-2000 500-2200 HP Range.25-2.25-2.25-3.25-3.25-3.25-5.25-7.5.25-10 Max. HP 2.1 2.1 2.1 3.15 3.15 5.25 7.875 10.5 CFM Range 300-800 600-1100 900-1800 1200-2400 1500-2900 1800-3600 2400-4200 3000-5800 Vertical Filter Data Quantity - (in.) 2-9 x 18 1-12 x 12 1-16 x 16 1-12 x 24 2-14 x 18 2-16 x 24 2-18 x 24 2-24 x 24 1-12 x 24 1-16 x 20 2-24 x 24 rea - ft 2 1.8 2.5 3.0 3.4 4.8 5.4 7.2 8.9 Velocity - ft/min. 444 440 450 471 469 481 465 483 ^Sloped Filter Data Quantity - (in.) 1-12 x 12 1-16 x 16 1-12 x 24 2-12 x 24 2-16 x 20 2-24 x 24 2-24x24 4-24x24 1-12 x 24 1-16 x 20 1-24 x 24 4-24 x 24 rea - ft 2 2.5 3.4 3.8 5.3 7.2 7.2 14.4 17.8 Velocity - ft/min. 320 324 355 302 313 361 233 242 Coil Data rea - ft 2 1.6 2.2 2.7 3.2 4.5 5.2 6.7 8.6 Width - in. 7.50 10.00 12.50 15.00 15.00 17.50 22.50 22.50 Length - in. 31.00 31.00 31.00 31.00 43.00 43.00 43.00 55.00 Velocity- ft/min. 500 500 500 500 500 500 500 500 ^vailable for MSCF unit only. For complete performance information see CPS. 107

Custom Coils 108 Custom Coils To guarantee your coil is going to perform as required, check for HRI Certification. est vailable Program 3 Days Replacement and OEM Coils Greenheck specializes in manufacturing competitively priced, qualityengineered replacement and OEM coils. Every coil we build is leak tested under water with 450 PSIG of dry nitrogen to guarantee 100% quality assurance. Greenheck s experienced team of application specialists are only a phone call away, ready to quickly respond to any questions you may have. Coil Type (Style) Custom ooster Chilled Hot Direct Standard Steam Hot Standard Condenser Water Water Expansion Steam Distributing Water Steam Tube Diameter (inches) 3/8* 1/2 5/8 Rows Min Rows 1 1 1 1 1 1 1 1 Max Rows 12 12 12 12 2 2 2 2 Fin Height (inches) Min 6 6 Fin height is dependent on tube diameter Max 24 24 (see Tube Diameter chart) Increments of 3 3 Fin Length (inches) Min Minimum fin length is 1 inch 6 6 Max Maximum fin length is 250 inches with center supports every 50 inches 48** 48** Increments of No restriction on fin length increments 1 1 Recommended Face Velocity (FPM) Min 400 500 400 600 500 500 500 500 Max 550 800 550 750 850 850 800 850 Recommended Fluid Velocity (FPS - for water coils) Min 1.5 1.5 N N N N 1.5 N Max 4.0 4.0 N N N N 4.0 N Recommended Pressure Drop (ft. of H 2 O or psi) Min 1 1 N N 1 1 1 1 Max 20 10 N N 125*** 125*** 10 125*** * Consult factory for selections. ** ooster coil fin lengths are dependent on fin height. *** Higher steam pressures will require heavier tube wall thicknesses. Casing Material Standard Optional 16 gauge 14 gauge galvanized steel galvanized steel 16 gauge stainless steel.09 in. thick copper Connection Types FPT - Female pipe thread MPT - Male pipe thread Sweat Casing Types Std. (1.5-inch flange) Standard ooster (1-inch flange) Slip and drive Endplates only Inverted S.P. flange Refrigerant Types R-22 R-134 R-404 R-407C R-410 R-502 Fluid Flow Rates For water coils, connections sizes are based on GPM of water. GPM 1-4 4-8 8-16 16-30 30-40 40-70 75-150 Connection 3/4 1 1-1/4 1-1/2 2 2-1/2 3 Tube Diameter 3/8 1/2 5/8 Wall Thickness (inches) 0.016 0.020 0.025 0.035 0.049 Fin Type luminum Copper Fins Per Inch (FPI) Min 10 6 6 Max 20 16 14 Fin Type Sine-wave Lanced Corrugated Flat Connection (inches) Min 0.5 0.5 0.5 Max 4.0 4.0 4.0 Fin Height (inches) Min 5.0 5.0 4.5 Max 120 120 120 Increments of 1.00 1.25 1.50 Fin Material luminum Copper Tube Diameter 3/8 1/2 5/8 Fin Thickness 0.006 0.008 0.010 Fin Type Sine wave (5/8 inch only) Lanced (3/8 inch only) Corrugated (1/2 inch only) Flat www.greenheck.com Coils

1 8 9 11 5 12 13 2 6 4 3 10 7 our inventory... For receiving, handling and distributing air. 1 2 3 4 5 6 7 8 9 10 11 12 13 Propeller Roof Upblast Fan Louver Intake Damper Spun luminum Roof Exhaust Propeller Hooded Roof Fan Recirculating Make-up ir Unit Portable Mancooler Fan High Temperature Roof Upblast Fan Roof Curb Dock Fan 100% Outdoor ir Make-up ir Unit Propeller Sidewall Fan Recirculating Make-up ir Unit Warehouse environments present a challenging set of air quality and control issues, from loading dock to dispatcher s office. High ceilings; large, open spaces; outside air incursion through open bays; engine exhaust; workers safety and comfort. It s a handful and it s something we re very good at! For example: our GreenHeat direct gas-fired heating system for make-up air units uses 100% outdoor air, slightly pressurizing the building to offset cold-air infiltration. 100% efficient direct gas-fired burners lower operating costs compared to less efficient air-rotation heat exchangers. High-velocity, high-temperature operation mixes air to prevent stratified temperatures inside. Individual-unit zone control provides whole-building comfort. With reduced energy use, low initial equipment cost and labor savings due to easy installation, Greenheck value goes straight to the bottom line. To learn more about warehouse air, contact your Greenheck rep or visit our website. Learn more at greenheck.com/4warehouse Fans & Ventilators Centrifugal & Vane xial Fans Energy Recovery Ventilators Packaged Ventilation Systems Make-up ir Units Kitchen Ventilation Systems Dampers Louvers Lab Exhaust Systems Coils 715.359.6171 greenheck.com Scan code to learn more about warehouse system ventilation.

Life Safety Products Dampers Life Safety Products Life safety dampers are intended to protect openings in walls and/or partitions to prevent the spread of fire and/ or smoke. The four types are: Ceiling Radiation Dampers Smoke Dampers Fire Dampers Combination Fire Smoke Dampers CRD-1 Ceiling Radiation Dampers Ceiling radiation dampers are designed to protect penetrations through the ceiling membrane of fire resistive floor ceiling and/or roof ceiling assemblies. These products are tested and listed in accordance with UL Standard 555C. 110 CRD-2 CRD-1WJ Qualified for installation in wood joist ceiling construction. CRD-1WT Qualified for installation in wood truss construction. CRD-60 In Stock s est vailable Program CRD-1 6x6, 8x8, 9x9, 10x10, 12x12, 14x14, 22x10, 22x22 In Stock CRD-2 6, 8, 10, 12 CRD-1WT Not applicable CRD-501 Not applicable CRD-1LP, CRD-1WJ, CRD-60 Not applicable 3 Days CRD-60, CRD-60X Not applicable 5 Days Fire Dampers Fire dampers are required by all building codes to maintain the required fire resistance ratings of walls, partitions and floors when they are penetrated by air ducts and transfer openings. These products are tested and classified in accordance with UL Standard 555. Fire dampers close automatically upon detection of heat, blocking the opening and preventing the spread of fire into the adjoining compartment or spaces. Greenheck Fan Corporation certifies that the DFD-210, 230; DFDF-310; DFDTF-210; and SEDFD-210 shown herein are licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 511 and comply with the requirements of the MC Certified Ratings Programs. The MC Certified Ratings Seal applies to air performance only. DFD-110, 150, DFD-150x10, DFD-150x12, DFD-150x14, DFD-150x16, FD-110, 150, FD-150x10, FD-150x12, FD150x14, FD-150x16; DFD-310, 350; FD-310, 350; FDR-510; DFDR-510; DFD-210, DFD-230, DFDTF-210, DFDF-310 ODFD-150, OFD-150 SEDFD-210 FD-100, SSDFD-150, SSFD-150; FD-300, SSDFD-350, SSFD-350; SEDFDR-510; SSDFDR-510; SSFDR-510 SE in model name denotes 316 stainless steel SS in model name denotes 304 stainless steel est vailable Program 3 Days 5 Days www.greenheck.com Dampers

Smoke Dampers Smoke dampers have two applications: 1. They may be applied in a passive smoke control system where they simply close and prevent the circulation of air and smoke through a duct or a ventilation opening in a smoke barrier. 2. They may be applied as part of an engineered smoke control system designed to control the spread of smoke using walls and floors as barriers and using the building s HVC system and/or dedicated fans to create pressure differences. These products are tested and classified in accordance with UL Standard 555S. Life Safety Products Greenheck Fan Corporation certifies that the SMD-201, 202, 203, 301, 302, SESMD-201 and SSSMD-201 shown herein are licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 511 and comply with the requirements of the MC Certified Ratings Programs. The MC Certified Ratings Seal applies to air performance only. SMD-201, 202, 203; SMD-301, 302; SMD-301V; SMD-401; SMDR-501, 502 SESMD-201; SSSMD-201 SESMDR-501; SSSMDR-501, 502; HSD-401 SE in model name denotes 316 stainless steel SS in model name denotes 304 stainless steel est vailable Program 3 Days 5 Days 111 Combination Fire Smoke Dampers Combination fire smoke dampers perform the function of both a fire damper and a smoke damper. uilding layouts and designs often combine fire and smoke rated partitions and barriers requiring the installation of both a fire damper and smoke damper at the same location. These products are tested and classified in accordance with both UL555 and UL555S. Greenheck Fan Corporation certifies that the CFSD-211, 212; FSD-211, 212, 213, 231, 311, 312, 331; SSFSD-211; SEFSD-211; and OFSD- 211, 212, 311, 312 shown herein are licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 511 and comply with the requirements of the MC Certified Ratings Programs. The MC Certified Ratings Seal applies to air performance only. FSD-211, 212, 213, 231, 311, 311V, 312, 331; CFSD-211, 212; GFSD-211, 212; OFSD-211, 212, 311, 312; FSDR-511, 512 SEFSD-211; SSFSD-211 SEFSDR-511; SSFSDR-511, 512 SE in model name denotes 316 stainless steel SS in model name denotes 304 stainless steel est vailable Program 3 Days 5 Days

Control Dampers Control Dampers Control dampers are designed to control pressure, temperature or flow in a HVC system. They can be used in intake, exhaust, or mixed air applications. These dampers require operation by either manual, electric or pneumatic actuators. There are seven types of control dampers: ir Measuring Dampers Insulated Thermally roken Control Dampers Volume Control Dampers Face and ypass Dampers Manual alancing Dampers Remote alancing Dampers Heavy Duty/Industrial Control Dampers. 112 ir Measuring Dampers ir measuring products help meet building minimum outdoor air requirements of SHRE Standard 62 or California Title 24 by providing accurate monitoring and control of outside air. The MS is an accurate airflow measuring station. The MD series combines the function of an accurate airflow measuring station and a low leakage control damper into one compact assembly. Greenheck Fan Corporation certifies that the MD-23 and 33 shown herein are licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 511 and comply with the requirements of the MC Certified Ratings Programs. The MC Certified Ratings Seal applies to air performance only. MD-23, 33, 42, 42V; MS est vailable Program Insulated Thermally roken Control Dampers Insulated thermally broken control dampers were developed for applications where it is necessary to minimize the transfer of heat or cold penetration and reduce condensation. ICD-44 features a thermally broken, insulated blade. ICD-45 features a thermally broken, insulated frame and blade. The ICD series meets the IECC (International Energy Conservation Code) requirements with a leakage rating of 3 cfm/ft 2 at 1 in. wg or less. Greenheck Fan Corporation certifies that the ICD-45 shown herein is licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 511 and comply with the requirements of the MC Certified Ratings Programs. The MC Certified Ratings Seal applies to air performance only. ICD-44, 45 est vailable Program 5 Days

Volume Control Dampers Volume control dampers regulate the flow of air and can also be used as a positive shutoff or automatic control. They are available in 3V, airfoil, round and vertical blade styles. Control Dampers Greenheck Fan Corporation certifies that the VCD-15, 18, 20, 23, 33 and 40 shown herein are licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 511 and comply with the requirements of the MC Certified Ratings Programs. The MC Certified Ratings Seal applies to air performance only. VCD-15, 18, 20, 23, 33, 34, 40, 42, 43; VCD-20V, 23V, 33V, 42V, 43V; VCDR-50, 53 SEVCD-23, 33 VCDRM-50, 53 SE in model name denotes 316 stainless steel est vailable Program 3 Days Face and ypass Dampers Face and bypass dampers are two connected dampers. This feature allows one damper to remain open while the other damper is closed. The model FH-43 is a horizontal style with dampers alongside of each other and the model FV-43 is a vertical style with dampers stacked. 113 FH-43; FV-43 est vailable Program 3 Days Manual alancing Dampers Manual balancing dampers are designed to regulate flow of air in an HVC system. They are used to accomplish system balancing. Each damper is equipped with a locking quadrant which fixes the damper blades in place after adjustment. These dampers are not intended to be used in applications as a positive shut off or for automatic control. MD-10, 10M, 15; MDR-50 est vailable Program Remote alancing Dampers Remote balancing dampers offer the same function as manual balancing dampers plus the added benefit to control the damper remotely at the diffuser or wall plate. These dampers are ideal for applications where it is difficult to manually adjust the dampers and balance airflow. The EZ alance remote control operates the damper motor by connecting to the wall, ceiling, or diffuser mounted RJ11 connector. RD-10, RDR-50 est vailable Program

Control Dampers, ackdraft and Relief Dampers Heavy Duty/Industrial Control Dampers Heavy duty/industrial control dampers have a heavy duty flanged frame designed to regulate airflow and provide shutoff in HVC or industrial process control systems. They are available in 3V, airflow or round blade styles. The HCD series is design for applications with pressure up to 45 in. wg and velocities up to 6000 fpm. HCDR series is designed for applications with pressure up to 20 in. wg and velocities up to 6500 fpm. *Mill finish ackdraft and Relief Dampers ackdraft dampers are used in ventilation systems to allow airflow in one direction and prevent airflow in the opposite direction. relief damper has an elevated and adjustable start-open pressure. There are four types: ackdraft arometric Relief Heavy Duty/Industrial ackdraft Pressure Relief 114 ackdraft Dampers ackdraft dampers are isolation dampers which allow airflow in one direction only. To help open the damper blades, backdraft dampers use springs, adjustable counterbalance weights, or a motorpack. WD-100 WD-320 WD-323 WD-330 WD-340 WD-410 ES-10, 11, 12, 30, 31, 32, 40, 41, 42; EM-10, 11, 12, 30, 31, 32, 40, 41, 42 WD-110, 120, 200, 210, 220, 300, 400, 420, 430 In Stock s 8x8, 10x10, 12x12, 16x16, 18x18, 24x24, 30x30 10x10, 12x12, 14x14, 18x18, 22x22, 26x26, 32x32, 38x38 8x8, 10x10, 12x12, 15x15 9x9, 12x12, 14x14, 16x16, 18x18, 20x20, 23x23, 24x24 8x11, 9x12, 12x17 8x8, 10x10, 12x12, 16x16, 18x18, 24x24, 30x30 Not applicable Not applicable est vailable Program In Stock 3 Days WDR-53 Not applicable 5 Days SSWDR-53 Not applicable Heavy Duty/Industrial ackdraft Dampers Heavy duty/industrial backdraft dampers have a flanged frame and are designed to prevent backflow at static pressures up to 20 in. wg. Counterbalance weights are mounted externally for easy adjustment and balancing in the field. *Mill finish HCD-120, 130, 135, 140, 220, 230, 240 HCDR-150, 250, 350, 351 H-110, 120, 230, 240 H-330 est vailable Program* 5 Days est vailable Program* 5 Days

arometric Relief Dampers arometric relief dampers are backdraft dampers with an adjustable start-open pressure. They are used for gravity ventilation and low velocity systems. Counterbalance weights provide the ability to fine tune start-toopen and full-open operation. R Series SER Series est vailable Program 5 Days 5 Days ackdraft and Relief Dampers SE in model name denotes 316 stainless steel Pressure Relief Dampers Pressure relief dampers are backdraft dampers with adjustable startopen pressure, capable of maintaining a relatively constant pressure at various airflows, which closes upon a decrease in differential pressure. Pressure relief dampers do not immediately open fully upon reaching their start-open pressure. HPR series dampers are flange mounted with counterbalance weights mounted externally for easy adjustment and balancing in the field. HPR-120, 230, 330 est vailable Program* 5 Days 115 *Mill finish ccess Doors ccess doors are designed for use in low to medium pressure duct systems. They provide a durable, practical, and inexpensive means of gaining access to damper components inside the ductwork. CD, HD RD Insulated RD Uninsulated s 6x6, 8x8, 10x10, 12x12, 14x14, 16x16, 18x18, 20x20, 24x24 6, 8, 10, 12-inch diameters 6, 8, 10, 12, 14, 16-inch diameters est vailable Program In Stock Marine Dampers Marine dampers are United States Coast Guard Class -60 division and S approved. The marine dampers were tested at Underwriters Laboratories (UL) in accordance with International Maritime Organization s (IMO) Fire Test Procedure code. Fire and combination fire/smoke dampers can be used in marine and offshore ventilation systems. IMO-310, 311; SSIMO-310, 311 est vailable Program 3 Days Greenheck Fan Corporation certifies that the IMO-311 and SSIMO-311 shown herein are licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 511 and comply with the requirements of the MC Certified Ratings Programs. The MC Certified Ratings Seal applies to air performance only. SS in model name denotes 304 stainless steel

Stationary Louvers Louvers ll Stationary Louvers Painted Finishes est vailable Program 5 Days Stationary Louvers Stationary extruded aluminum louvers are used in applications that require intake and exhaust ventilation with moderate protection from rain and weather infiltration. Non-drainable and drainable models available. Product Type Description Drainable lades EDD-401, 601 ESD-202, 403, 435, 603, 635 Designed with a drainable head and drainable blades to protect air intake and exhaust openings in a buildings exterior walls by minimizing water penetration. Drain gutters are located on every blade to capture water which is dispersed to the jambs and drained out of the sill. The Dual Drainable (EDD) louvers have an additional rain gutter on each blade to provide additional water and weather protection. 116 Drainable Head EDJ-202, 401, 430, 601 EDK-402, 430, 602 ESID-430 Design includes a drainable head member with either J or K style blades and optional 30 degree blades to maximize free area. The ESID-430 design allows intake and discharge ductwork to be connected to the back of the louver and prevents the short cycling of air. This unit can be either a combination intake/ discharge louver or discharge only louver. Non-Drainable lades ESJ-202, 401, 602 ESK-402, 602 Designs incorporate traditional non-drainable J or K style blades with sloped sill. The K style blade has an additional offset rain hook in each blade to provide extra protection against water penetration. High free areas provide minimum resistance to airflow. Design incorporates hidden mullions when multi-wide sections are needed. Recessed Mullion ESJ-401RM, 602RM ESK-402RM, 602RM EHM-601 The traditional non-drainable J and K style blades with recessed mullion. Design offers better blade alignment for a continuous blade appearance. Provides more structural integrity between multi-wide sections. www.greenheck.com Louvers

ll Thinline Louvers Painted Finishes est vailable Program Thinline Louvers Thinline extruded aluminum louvers are commonly used for interior or exterior applications where high free area and low airflow resistance is required. The narrow depth makes this product ideal for installation into curtainwalls, windows and doors. Product Type Description Thinline, Sightproof Louvers Framed s ESF-145 ESJ-150 ESU-130, 150 The narrow depth makes this product ideal for installation into curtainwalls, windows, doors or as air conditioning grilles. Flat or J style blades available depending on model selected. Frameless s ESU-130S, 150S Frameless models with extruded aluminum vertical supports are ideal for use as a Packaged Terminal ir Conditioning (PTC) grille. 117 ll Sightproof Louvers Painted Finishes est vailable Program 5 Days Sightproof Louvers Sightproof extruded aluminum louvers designed to prevent visual seethrough and security. Can be applied as air intake or discharge louvers or can be applied as louvered equipment screens. Chevron drainable and non-drainable blades available, as well as a vertical blade configuration. Product Type Description Horizontal lades SES-202, 401 SEH-202, 401 SED-202, 401, 501 SES models incorporate a horizontal chevron blade preventing visual see-through. SEH models incorporate a drainable head member for increased protection against water penetration. SED models offer both drainable head member and drainable blades for maximum protection against water penetration. Vertical lades SEV-401, 501 Incorporates chevron style blades in a vertical blade configuration preventing visual see-through.

Combination Louver/Damper, djustable Louvers EC, EC, ECD, ECN, GCE, GCI Painted Finishes ECC Painted ECC est vailable Program 5 Days 15 Days Combination Louver/Damper Louvers Extruded aluminum combination louver/dampers incorporate operable and stationary blades into one common frame member. Design maintains a stationary appearance when adjustable blades are closed. tight seal is created to prevent the passage of air. Product Type Description Drainable lades EC-401, 601 ECC-401, 601 EC-601 ECD-401, 601 ll models include drainable stationary blades and a drainable head member. Drainable adjustable blades have either concealed blade linkage or exposed onblade linkage. Design of EC-601 incorporates airfoil adjustable blades for less airflow resistance. ECC models incorporate a concealed actuator. 118 Non-Drainable lades ECN-601 Non-drainable stationary blades are combined with non-drainable center pivot adjustable blades. The design does include a drainable head member and concealed blade linkage. Gravity Louvers GCE-202, 402 GCI-202, 402 Combination weather louver and gravity backdraft dampers designed to protect air exhaust openings in building exterior walls. Design incorporates a drainable head member, J style stationary louver blades, pressure/gravity operated damper blades. Recommended application is in close proximity to an exhaust or intake air fan. ED, EH Painted Finishes EDC Painted EDC est vailable Program 5 Days 15 Days djustable Louvers Extruded aluminum operable blade louvers are designed to be open or closed to protect air intake and exhaust openings in exterior building walls. Louver blades are center pivoted and can be operated manually or by any commonly specified damper actuator. Product Type Description Drainable lades ED-401, 601, 635 EDC-401, 501 ED offer concealed blade linkage. ED-635 offers 35 blade angle. EDC models incorporate a concealed actuator. Non-Drainable lades EH-401, 690 EH models offer concealed blade linkage. EH-690 provides 70% free area when blades are in full 90 degree open position.

ll Wind-Driven Rain Louvers Painted Finishes est vailable Program 5 Days Wind-Driven Rain Louvers Wind-driven rain louvers are Greenheck s most effective louvers in minimizing water penetration through wall openings. Designed to protect air intake and exhaust openings in building exterior walls that are sensitive to the penetration of wind-driven rain. Product Type Description Horizontal lades Vertical lades EHH-201, 401, 501, 601, 701 EVH-201, 401, 501, 602, 801 Horizontal blades offer the traditional louver look and excellent protection against wind-driven rain. Vertical blades offer the best protection against wind-driven rain although the vertical blade look is not typical. 119 Wind-Driven Rain, Florida pproved, Miami-Dade Qualified ESD-635D 12x12, 18x18, 24x24, 30x30, 36x36, 48x48 Mill Finish Only (Miami Warehouse) ESD-435X, ESD-635X, EHH-501X, EVH-602X Painted Finishes, models above EC-601D, ESD-635D, EHH-601D, ESS-502D, EVH-602D, EVH-660D Painted Finishes, models above FJ-601X, ESD-635PD, EHH-601PD Painted Finishes, models above est vailable Program In Stock 3 Days 5 Days 15 Days Florida Product pproved Louvers Miami-Dade Qualified Louvers and Penthouses These louvers have been designed to meet the stringent criteria established by the Florida uilding Code. Whether your application calls for louvers to meet a high wind-load, impact resistance, or be resistant to the penetration of wind-driven rain, Greenheck has the solution. Product Type Description Florida Product pproved FJ-601X, ESD-435X, ESD-635X, EHH-501X, EVH-602X pproved for use in Florida's High Velocity Hurricane Zone if Miami-Dade Notice of cceptance is not required. ll mechanically fastened models comply with TS-202 Uniform Static Pressure Test (STM E330). s also comply with TS-201 Large Missile Impact Test (STM E1996), TS-203 Cyclic Wind Pressure Load Test with optional welded construction. Miami-Dade Qualified Louvers: EC-601D, ESD-635D, EHH-601D, ESS-502D, EVH-602D, EVH-660D Miami-Dade Penthouses: EHH-601PD, ESD-635PD For use within Florida's High Velocity Hurricane Zone when a Miami-Dade Notice of cceptance is required. ll models comply with Miami-Dade structural test protocols TS-201 Large Missle Impact Test (STM E1996), TS-202 Uniform Static Pressure Test (STM E330) and TS-203 Cyclic Wind Pressure Test.

coustical, Fabricated Louvers ll coustical Louvers Painted Finishes est vailable Program 15 Days coustical Louvers coustically insulated louver blades provide sound absorption for escaping noise. vailable in either formed aluminum or steel material and in a variety of blade styles such as airfoil, sightproof or J blade. Product Type Description irfoil lades F-801 coustical airfoil blades offer the highest free area and lowest airflow resistance. 120 J lades FJ-120, 601, 801 coustical J style blade series offers the best balance of economics, airflow resistance and sound absorption. Sightproof lades FS-120 coustical sightproof blades prevent visual seethrough while providing sound absorption. ll Fabricated Louvers Painted Finishes est vailable Program 3 Days Fabricated Louvers Fabricated from 20, 18 or 16 gauge galvanized steel and available in stainless steel material. Units are low cost compared to extruded aluminum models. Stationary and adjustable blades are available, as well as drainable and non-drainable blades. Product Type Description djustable lades FD-402, 602, 635 FJ-402, 602 Operable drainable (FD) or J (FJ) blades can be closed for tight air shut off. Provide similar features as the ED extruded aluminum models. Can be operated manually or by any commonly specified damper actuator. Stationary lades FDS-402, 602 FSJ-402, 602 FDS models incorporate stationary drainable blades for excellent resistance to water penetration and FSJ models include traditional J style blades.

est vailable Program Shipment time is determined by size and finish type chosen rick Vents permanent means of ventilation for crawl spaces, hung ceilings, incinerator rooms, chimney flues, foundations, pipe spaces and corridors. Many standard sizes and finishes available. Product Type Description Cast luminum VC Cast aluminum construction, made from high corrosion-resistant alloy #319. The units are designed with a deep louvered face and a continuous water stop to prevent water from entering the building. It is a one piece molded unit. rick Vents, Louvered Penthouses Extruded luminum VE Extruded construction provides a quality finished appearance. The units are designed with deep louvered overlapping blades with storm drips on the rear of the blades. The units also have a high water stop at the rear of the unit. Flanged Extruded luminum VF Extruded construction with an aesthetically pleasing flanged frame for easier installation in existing walls. The units are designed with deep louvered overlapping blades with storm drips on the rear of the blades. The units also have a water stop at the rear of the unit. 121 VC VE VF ll sizes 8 1 8 x 7 3 4 12 x 7 3 4 15 5 8 x 7 3 4 16 1 2 x 7 3 4 Other sizes ll sizes nodized^ Not available In Stock^ In Stock^ In Stock^ In Stock^ 5 Days 5 Days Mill Finish 5 Days 5 Days 5 Days 5 Days 5 Days 5 Days 5 Days nodized* Not available 5 Days 5 Days 5 Days 5 Days 5 Days 5 Days Painted** *** ^ 204 R1, clear * 204 R1, medium, dark, by others ** Primer, aked Enamel, croflur, Kynar, Mica - all done at Greenheck *** aked Enamel paint only s up to 48 x 48 inches ll models and s Painted Finishes est vailable Program 5 Days 15 Days Louver Penthouses Greenheck penthouses offer clean lines, mitered corners, all aluminum construction and removable hoods. For complete product information on WIH Intake and WRH Relief, refer to Greenheck's Gravity Ventilators catalog, or contact your local representative. Product Type Description Penthouse WIH WRH The low silhouette louvered penthouses are designed for intake (WIH) or relief (WRH) applications with either natural gravity or positive pressure systems. These units feature a storm-proof aluminum louver with mitered corners and clean horizontal lines. The design affords lower pressure drops while maintaining low hood heights. Removable cover is lined with fiberglass to prevent condensation. Maximum throat dimension is 60 x 120 inches

Qualifications and Licenses 122 Louver Qualifications and Licenses Greenheck offers the most MC licensed louvers in the industry, including Miami-Dade Qualified and Florida Product pproved products. License Description MC: Water Penetration and ir Performance MC: Water Penetration, Sound, and ir Performance MC: Water Penetration, ir Performance, Wind-Driven Rain ESD-635D; ESS-502D; ESD-435X; ESD-635X; ESJ-202, 401, 602; ESK-402, 602; ESJ- 401RM, 602RM; ESK-402RM, 602RM; EDJ-202, 401, 430, 601; EDK-402, 430, 602; ESD-202, 403, 435, 603, 635; EDD-401, 601; EHM-601; SES-202, 401; SEH-202, 401; SED-202, 401, 501; ECD- 401, 601; EC-401, 601; EC-601; EC-601D; ECN-601; ED-401, 601, 635; EH-401; FSJ-402, 602; FDS-402, 602; FJ-402, 602 and FD-402, 602, 635 FJ-120, 601, 801; F-801; FS-120 and FJ-601X EVH-201, 401, 501, 602, 801; EHH-201, 401, 501, 601, 701; EVH-602D; EVH-660D; EHH-601D; EHH-501X and EVH-602X Greenheck Fan Corporation certifies that the stated models are licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 511 and comply with the requirements of the MC Certified Ratings Program. The MC Certified Ratings Seal applies to water penetration and air performance. Greenheck Fan Corporation certifies that the stated models are licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 511 and comply with the requirements of the MC Certified Ratings Program. The MC Certified Ratings Seal applies to water penetration, air performance and sound ratings. Greenheck Fan Corporation certifies that the stated models are licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 511 and comply with the requirements of the MC Certified Ratings Program. The MC Certified Ratings Seal applies to water penetration, air performance and wind-driven rain. MC: ir Performance EH-690 (90 degree blade angle) Greenheck Fan Corporation certifies the stated models are licensed to bear the MC Seal. The ratings shown are based on tests and procedures performed in accordance with MC Publication 511 and comply with the requirements of the MC Certified Ratings Program. The MC Certified Ratings Seal applies to air performance. ESD-635D, 635X, 435X, EC-601D FJ-601X; EHH-501X; EVH-602X; EC-601D; EHH-601D; ESD-635D*, 635X*; ESS-502D; *0.125" Frame & lade EVH-602D, 602X, 660D Greenheck Fan Corporation certifies that the product shown herein is approved to bear the MC Listing Label. The ratings shown are based on tests and procedures performed in accordance with MC Publications and comply with the requirements of the MC Listing Label Program. Greenheck Fan Corporation certifies that the product shown herein is approved to bear the MC Listing Label. The ratings shown are based on tests and procedures performed in accordance with MC Publications and comply with the requirements of the MC Listing Label Program. Greenheck Fan Corporation certifies that the product shown herein is approved to bear the MC Listing Label. The ratings shown are based on tests and procedures performed in accordance with MC Publications and comply with the requirements of the MC Listing Label Program. Miami-Dade County Qualified EC-601D, ESD-635D, EHH-601D, ESS-502D, EVH-602D, EVH-660D EHH-601PD, ESD-635PD ll models comply with Miami-Dade structural test protocols TS-201, Large Missile Impact Test (STM E1996); TS-202, Uniform Static Pressure Test (STM E330) and TS-203, Cyclic Wind Pressure Test. Florida Product pproved and UL Classified FJ-601X, ESD-435X, ESD-635X, EHH-501X, EVH-602X ll mechanically fastened Florida Product pproved models comply with TS-202, Uniform Static Pressure Test (STM E330). s also comply with TS-201 Large Missile Impact Test (STM E1996), TS-203 Cyclic Wind Pressure Load Test with optional welded construction.

Options and ccessories We have a full line of accessories available on all Quick uild programs. Standard birdscreen Standard insect screen Clip angles Flange frame Standard finishes Triangular Shapes (10 day mill; 15 day painted finishes) These accessories and options allow Greenheck to complete your project just as you envision it. Louver Finishes Choosing the right finish is as critical to a louver project as performance and ratings. The following chart puts complete application information at your fingertips to make the right choice. Options, ccessories, Finishes Finish Type Description/pplication Color Selection Standard Warranty (luminum) 2-coat and 3-coat 70% Kynar 500 /Hylar 5000 M 2605 Dry film thickness 1.2 mil. (K: Duranar, Fluoropon, Trinar, Flouropolymer, Polyvinylidene Fluoride, PVDF2) est. The premier finish for extruded aluminum. Tough, long-lasting coating has superior color retention and abrasive properties. Resists chalking, fading, chemical abrasion and weathering. Standard Colors: ny of Greenheck's 24 standard colors can be furnished in 70% or 50% Kynar 500 / Hylar 5000 or aked Enamel. 10 Years (Consult Greenheck for availability of extended warranty) 123 2-coat and 3-coat 50% Kynar 500 /Hylar 5000 M 2604 Dry film thickness 1.2 mil. (K: croflur, crynar ) aked Enamel M 2603 Dry film thickness 0.8 mil. (K: crabond Plus, Duracron ) etter. Tough, long-lasting coating has excellent color retention and abrasive properties. Resists chalking, fading, chemical abrasion and weathering. Good. Provides good adhesion and resistance to weathering, corrosion and chemical stain. 2-Coat Mica: Greenheck offers nine standard 2-coat Mica colors. Other colors are available. Consult Greenheck for possible extra cost when selecting non-standard colors or special finishes. 5 Years 1 Year Color nodize -M10C2144 (>0.7 mil) Two-step anodizing is produced by following the normal anodizing step with a second, colorfast electrolytic process. Light, Medium or Dark ronze; Champagne; lack 5 Years Clear nodize 215 R-1 -M10C2141 (>0.7 mil) Clear, colorless and hard oxide aluminum coating that resists weathering and chemical attack. Clear 5 Years Clear nodize 204 R-1 -M10C2131 (0.4-0.7 mil) Clear, colorless and hard oxide aluminum coating that resists weathering and chemical attack. Clear 1 Year Industrial Coatings Greenheck offers a number of industrial coatings such as Hi-Pro Polyester, Epoxy, and Permatector. Consult a Greenheck Product Specialist for complete color and application information. Consult Greenheck Mill Finish Materials may be supplied in natural aluminum or galvanized steel finish when normal weathering is acceptable and there is no concern for color or color change. Not available Finishes meet or exceed M 2605, M 2604, M 2603 and M 611 requirements. Please consult www.greenheck.com for complete information on standard and extended paint warranties. Paint finish warranties are not applicable to steel products.

Mounting Options - ases, Isolators 124 ccessories Mounting Options - Utility, Centrifugal and Industrial Fans The mounting options shown here (type and ) relate to the Selection Guide For Vibration Isolation as published in the latest SHRE applications handbook, HVC pplications-sound and Vibration Control. Direct Mount, Type - No base required. Isolators are attached directly to equipment. Direct isolation can be used if equipment is unitary and rigid without the use of additional support. Direct isolation is not recommended for equipment having large overhung loads (e.g. motors on rrg. 9 fans). If there is any doubt that equipment can be supported directly on isolators, use rails, bases or consult the factory. rrg. 1 CSW IPO, IPW, IP CSW 3 FDW, IDW 4 SFD/SWD 9 10 Spring Mount Rubber Mount Mounting Selection Direct Mount, Type Isolation ase, Type 2 CSW IPO, IPW, IP SF/SW CSW IPO, IPW, IP Rubber Mounts Type 2, 1/4- and 1/2-inch deflection Neoprene mountings consist of a steel top plate and base plate completely embedded in colored (oil-resistant) neoprene for easy identification of capacity. Neoprene mountings are furnished with a tapped hole in the center. This enables the equipment to be bolted securely to the rubber mount. Free-Standing Open Spring Mounts Type 3, 1-inch deflection Free-standing spring isolators are unhoused laterally stable steel springs. They provide a minimum horizontal stiffness of 0.8 times the rated vertical stiffness and provide an additional 50% overload capacity. These isolators are equipped with a top mounted adjusting bolt and an acoustical nonskid base. Springs are color coded or identified to indicate load capacity. Isolation ases, Type 2 - Isolation bases consist of steel members welded into a rigid one piece base. Motor slide rails are included where applicable. ases are required for all rrg. 1 and 3 fans with independently mounted motors. Isolation bases are available without isolators, with rubber mounts or with spring mounts. Quick uild bases are standard dimensions with factory-supplied motor and drives. Shown with spring isolators Spring Mount with Height Saving racket Rubber Mount Restrained Spring Mounts Type 4, 1-inch defection Restrained spring isolators consist of laterally stable, free-standing springs assembled into a steel housing. These assemblies are designed for vertical and horizontal motion restraint. Restrained spring isolators can be used for blocking during equipment installation and are provided with leveling bolts. Springs provide 50% overload capacity and are color coded or identified to indicate load capacity. Restrained spring mounts are recommended for equipment subject to wind loading or large torquing forces. Housed Spring Mounts Type 4, 1-inch deflection Housed spring isolators consist of steel springs assembled into a telescoping housing with a top mounted adjusting bolt and an acoustical non-skid base. Housed spring isolators include resilient inserts to prevent metal-to-metal contact and provide snubbing for side loads. Springs provide an additional 50% overload capacity and are color coded or identified to indicate load capacity. Mounting Options - Horizontal Inline Centrifugal Fans For ease of installation, knockouts are provided at each location where mounting brackets are shown. Universally adjustable brackets are available to mount the fan in hanging or base mounted positions. Hanging Isolators - Complete hanging isolator kits are available with either spring, rubber, or neoprene isolators. The isolators are sized to match the weight of the fan. (Hanging rods supplied by others). ase Isolators - Complete base isolator kits are available with either neoprene or spring isolators and are sized to match the weight of the fan. Hanging Spring Hanging Rubber Hanging Neoprene Standing Neoprene Standing Spring

Roof Curbs, Extensions and Equipment Supports wide variety of roof curbs are available including flanged, straight-sided, canted, pitched, ridged, vented, soundabsorbing. Extensions raise the fan discharge and can provide an accessible mouting location for dampers. Product Type Description Flat, insulated or noninsulated roof decks Flat, pitched or ridged, insulated or non-insulated roof decks Flat, non-insulated roof decks Flat, pitched or ridged, non-insulated roof decks GPI - Galvanized 12-inch high, with or without damper tray, square sizes GPI - luminum or galvanized, other heights, non-stock square and rectangular sizes GPS - ll types, sized to meet your requirements GPF - ll types, sized to meet your requirements Welded, straight-sided construction with rigid fiberglass insulation and 2-inch mounting flange Welded, canted construction with rigid fiberglass insulation Welded, straight-sided construction with rigid fiberglass insulation and 5-inch mounting flange est vailable In Stock In Stock In Stock Roof Curbs, Extensions and Equipment Supports Flat, insulated roof decks GPFHL - ll types, galvanized and aluminum GPFHD - ll types, galvanized Welded, straight-sided construction with single roof flashing flange 5-inch width. One inch thick insulation. Welded, straight-sided construction with double-thick roof flashing flange 5-inch width. One inch thick insulation. 125 Flat, insulated roof decks GPR - ll types, sized to meet your requirements Welded, raised cant construction with rigid fiberglass insulation daptors/reducers Curb daptors and Reducers Used to match new fans to existing roof curbs. Welded galvanized steel or aluminum. Flat roof decks in kitchen applications GPFV - Galvanized, square sizes GPFV - luminum or galvanized, other heights, nonstock square sizes Welded, vented straight-sided curb designed for use with our model CUE fan to provide the 40 inch minimum discharge height above the roof line (per NFP 96) In Stock Curb extensions in kitchen systems VCE - Galvanized, square sizes VCE - luminum or galvanized, other heights, non-stock square sizes Welded, vented curb extension designed for use with an 8-inch high roof curb and our model CUE fan to provide the 40 inch minimum discharge height above the roof line (per NFP 96) In Stock (size 22 only) Curb extensions GPE, GPEX Welded, with access door for easy access to the damper and damper actuator as well as fulfilling additional height requirements Equipment supports GESS, GESR Equipment supports Welded aluminum or galvanized canted construction Insulated and noninsulated flat roof decks, pitched roofs, curb extensions TS, TR, TE, TI Sound attenuating curbs Welded aluminum or galvanized canted construction for curbs, straight-sided for extensions with rigid fiberglass insulation Specifically for Laboratory Exhaust Fans GPFHL, GPFHD Sizing: Curb with wood nailer should be 1-1/2 inches undersized from curb cap dimension. Curb without wood nailer should be 1 inch undersized from curb cap dimension. Welded, straight-sided, insulated, 5-inch flashing flange 5 Days Damper trays Insulation - all except GPE, VCE and GPFV Options and ccessories Step for insulation - GPR only - up to 6 inches Single pitch - GPI, GPF and TS Ridge mount - GPI, GPF and TS Double-shell construction - all except T and GPE www.greenheck.com Roof Curbs

Electrical ccessories Electrical ccessories Call our parts department toll free at 800-355-5354 for parts orders only with fan model and the serial number located on the fan nameplate. Description Disconnect, Standard or Weatherproof Motor Starters NEM-1 NEM-3R Part Number Rated up to: HP/MPS Voltage Phase Notes N1TS-1 1/2 hp 115 1 2x4 j-box included N1TS-2 1 hp 115 1 2x4 j-box included N1TS-3 2 hp 115 1 2x4 j-box included N1TS-4 2 hp 200/277 1 2x4 j-box included N1TS-6 7-1/2 hp 200/600 3 2x4 j-box included N3RTS-1 1/2 hp 115 1 Weatherproof enclosure N3RTS-6 7-1/2 hp 200/600 3 Weatherproof enclosure NEM-1, 4, 4X MS1P 1 hp 110/240 1 Mounts in 2x4 j-box 126 Manual Switch Speed Control Switches Motion Detector NEM-1, 3R MSSC 25 hp 200/600 3 NEM-1, 3R, 4X MSC 25 hp 200/600 3 NEM-1 MS-15 1/6 hp 115 1 Three speed MS-1 1/2 hp 115 1 Single speed MS-16 1/2 hp 115 1 Single speed Pilot light 381977 2 hp 200/277 1 Single speed 383786 2 hp 200/600 3 Single speed 385031 5 amps 115/127 1 2x4 j-box required 385205 10 amps 115/127 1 2x4 j-box required 385206 15 amps 115/127 1 2x4 j-box required 380896 5 amps 220/240 1 2x4 j-box required 385032 8 amps 220/240 1 2x4 j-box required 382136 5 amps 277 1 2x4 j-box required 435099 15 amps 115 1 1 function 435097 16 amps 115 1 2 function 383008 12.5 amps 115 1 0 to 20 minutes 2x4 j-box required Time Delay Transformer Fire Stat Thermostat GTD 7.5 amps 115 1 383167 2.0 amps 230/277 to 115 1 383168 4.3 amps 230/277 to 115 1 383169 6.5 amps 230/277 to 115 1 383170 8.6 amps 230/277 to 115 1 380028 8.0/4.0 amps 115/220 1 383668 8.0/4.0 amps 115/220 1 380044 16 amps 115 1 0 to 60 minutes 2x4 j-box required Type II Limit control temperature uto reset Type III djustable ir Stat Close circuit - 120 F to 200 F Open circuit - 100 F Reverse cting Thermostat Contacts close on temperature rise djustable range 30 to 110 F

Coatings Greenheck offers protective powder coatings for many of the Quick uild products. Decorative coatings are ideal for projects where the fan exterior appearance is important and additional chemical resistance is not required. Customers can choose from nine standard RL colors. RL is an independent organization providing a global color language. Referencing an RL color ensures color uniformity worldwide. Coatings SIGNL WHITE RL 9003 EIGE RL 1001 PURE WHITE RL 9010 CONCRETE GREY RL 7023 EIGE GREY RL 7006 PLE ROWN RL 8025 GREY ROWN RL 8019 GRPHITE LCK RL 9011 127 Colors shown are only representative. Reference a specific RL color for color matching. Colors are subject to change. JET LCK RL 9005 Protective coatings are available in a choice of four electrostatically applied powders. Powders available range from polyester urethanes to high performance epoxy providing an available selection for most environments. Powder coatings offer a number of advantages over most wet coatings. Electrostatic painting involves applying a dry, charged particle to a grounded sheet metal. The results are uniform coverage and thickness with heavier coverage in the high charge areas (edges, corners, and pockets), that are difficult to reach with wet paint. nother advantage is environmental friendliness. The following is a brief description of the protective coatings offered. For more information consult your local representative. Permatector Permatector Permatector is the standard coating applied to all steel fans. Typical applications include corrosion resistance in indoor and outdoor environments. *RL 7023 concrete gray (standard) Epoxy Epoxy Epoxy has excellent moisture resistance and moderate to good chemical resistance. Greenheck s epoxy is light tan in color so it will resist fading and chalking when exposed to sunlight. Hi-Pro Polyester Hi-Pro Polyester (used in lieu of ir Dry Phenolic) This coating is resistant to salt water, chemical fumes, and moisture in more corrosive atmospheres. It has superior chemical resistance, excellent abrasion and outdoor UV protection. This coating has protective qualities that exceed ir Dried Heresite. Industrial Epoxy Industrial Epoxy Industrial Epoxy is a high performance epoxy with excellent chemical resistance in interior applications to a wide variety of chemicals including acids, caustics, solvents, and high moisture.

Coatings Two Coat System When compared to a traditional single coat application, the benefits of the two coat system include: n automatic powder coat application produces uniform coverage and unmatched paint quality. The double coat thickness provides superior durability and protection from air and water. The zinc-rich primer includes an epoxy component that provides additional corrosion protection. The zinc-rich primer provides chemical protection of exposed steel to prevent corrosion. One Coat Process Topcoat 2-3 mils Two Coat Process Topcoat 4-6 mils Total ase Steel ase Steel Zinc-rich Primer (70% zinc) dvanced Surface Preparation dvanced Surface Preparation 128 The Zinc dvantage Protective layer of zinc-rich primer The zinc-rich primer actively and passively protects the base steel Damaged Surface if the coating becomes damaged and the steel is exposed to air and water. The zinc-rich primer has a lower If scratched or chipped, the zinc donates electrons to the iron, producing immediate corrosion protection. electrochemical potential than the base steel. s a result, the steel is actively held in a neutral state when exposed to a corrosive environment the driving force of corrosion is halted. protective layer forms over the damaged surface as a by-product of the chemical reaction and passively protects the exposed steel from further corrosion due to air and water. Salt Spray STM 117 Durability *Chemical Resistance Ratings Hours 1000 2000 3000 4000 Pencil Hardness STM D3363 Cross-Hatch dhesion STM D3359- leach Sulfuric cid (10%) HCI (10%) MEK Chlorine (0.1%) Na0H (20%) 0 0 0 1 0 1 Permatector 3H No Failure 0 - No effect Hi-Pro Polyester 2H No Failure 1 - Slight change in gloss or color Perma-Z 3H No Failure 2 - Surface etching, severe staining, but film integrity remains 3 - Significant pitting, cratering, swelling, or erosion with LabCoat 2H No Failure obvious surface deterioration * For additional chemical resistance of Hi-Pro Polyester, see Greenheck s Product pplication Guide F/110-04R4, Performance Coatings for Ventilation Products Salt Spray STM 117 is a comparative test that indicates the corrosion resistance of powder paint coatings. Pencil Hardness and Cross-Hatch dhesion tests determine the durability of coating to withstand scratches, nicks and chips. Chemical Resistance Ratings provide information on how each coating option will hold-up in certain chemical environments.

Greenheck Representative Directory United States Representatives LM *irmingham - ir-tech Incorporated 205-942-7081 Mobile (*Pensacola, FL) - ir-tech of Pensacola Inc 850-433-6443 LSK nchorage - Stinebaugh & Company 907-345-8021 RIZON Mesa - Thermir Systems 480-377-9255 Tucson - Thermir Systems 520-623-0656 RKNSS Jonesboro (*Memphis, TN) - ir Components Inc 901-382-1884 Little Rock - iretech Corporation 501-280-0404 Springdale - iretech Corporation 479-756-8600 CLIFORNI *naheim - Norman S. Wright Mechanical Equip. of Southern California LLC 714-632-9800 Chico - Norman S. Wright Mechanical Equipment 530-345-9289 Fresno - Norman S. Wright Duckworth 559-449-8701 *Los ngeles - Norman S. Wright Mechanical Equip. of Southern California LLC 818-367-6100 Pismo each - Norman S. Wright Duckworth 805-773-2810 *Sacramento - Norman S. Wright Mechanical Equipment 916-381-6666 San Diego - Norman S. Wright Dennison McKey Mechanical Equipment Co. LLC 619-440-5061 *San Francisco - Norman S. Wright Mechanical Equipment 415-467-7600 Santa Clara - Norman S. Wright Mechanical Equipment 408-748-1304 Santa Rosa - Norman S. Wright Mechanical Equipment 707-568-3903 Stockton - Norman S. Wright Mechanical Equipment 209-599-7830 COLORDO Colorado Springs - CFM Company 719-528-1116 *Denver - CFM Company 303-761-2291 Fort Collins - CFM Company 970-493-7293 Grand Junction - CFM Company 970-243-4377 CONNECTICUT *Newington - uckley ssociates Inc. 860-666-0555 Stratford - uckley ssociates Inc. 203-380-2405 DELWRE Seaford - Ward-oland ssociates Inc. 302-629-7006 Wilmington (*Collingswood, NJ) - Del-Ren ssociates Inc. 856-541-1776 FLORID *Fort Myers - Commercial ir Management Inc. 239-277-0029 Jacksonville - Stan Weaver & Company 904-398-9933 *Miami - Cors-ir 954-456-4300 *Orlando - Stan Weaver & Company 407-581-6940 *Pensacola - ir-tech of Pensacola Inc. 850-433-6443 *Tampa - Stan Weaver & Company 800-783-6915 West Palm each - Cors-ir 561-844-9767 129 Representative Directory - United States *Denotes representatives who carry local inventory ww.greenheck.com Find My Rep

Representative Directory - United States 130 United States Representatives GEORGI *tlanta/*ugusta - Holden & ssociates 770-458-4000 Dalton (Chattanooga, TN) - Hoffman & Hoffman Inc. 423-693-2890 Macon - Mingledorffs Inc. 478-477-3193 Savannah - Mingledorffs Inc. 912-236-8122 HWII *Honolulu - Norman S. Wright Mechanical Equipment 808-678-3911 IDHO oise - Technical ir Products Inc. 208-377-2071 Coeur d lene (Spokane, W) - Parmely & ssociates Inc. 509-443-1220 ILLINOIS elleville (St. Louis, MO) - H.C. Sharp Company Inc. 314-351-6900 *Chicago - rucker Company 847-437-9690 Peoria - rucker Company 309-691-5160 INDIN Evansville (*Louisville, KY) - RL Craig Company Inc. 502-244-1600 Fort Wayne - Colby Equipment Co. Inc. 260-482-3773 Gary (*Chicago, IL) - rucker Company 847-437-9690 *Indianapolis - Colby Equipment Co. Inc. 317-545-4221 Lawrenceburg - (*Cincinnati, OH) - EP, Inc. 513-489-9494 IOW Council luffs (Omaha, NE) - Commercial ir Management 402-339-9177 Davenport (Peoria, IL) - rucker Company 309-691-5160 Des Moines - Products Inc. 515-288-5738 Rock Rapids (Sioux Falls, SD) - Climate Systems Inc. 605-334-2164 KNSS *Kansas City - Jorban-Riscoe ssociates Inc. 913-438-1244 KENTUCKY Covington (*Cincinnati, OH) - EP Inc. 513-489-9494 Grayson (St. lbans, WV) - Mason & arry Inc. 304-755-0781 *Louisville - RL Craig Company Inc. 502-244-1600 LOUISIN *aton Rouge - ir-side Equipment Inc. 225-275-6930 New Orleans - ir-side Equipment Inc. 504-837-2346 Shreveport - Reed Mechanical Equipment Inc. 318-687-8818 MINE Portland - uckley ssociates 207-773-0078 MRYLND altimore - Ward-oland ssociates Inc. 410-363-1833 *eltsville - C.G. Wood Company Inc. 240-241-5300 Frederick - Ward-oland ssociates Inc. 301-378-2853 Salisbury (Seaford, DE) - Ward-oland ssociates Inc. 302-629-7006 *Denotes representatives who carry local inventory www.greenheck.com Find My Rep

United States Representatives MSSCHUSETTS *oston - uckley ssociates Inc. 781-878-5000 Pittsfield (*lbany, NY) - uckley ssociates Inc. 518-438-7423 Springfield (*Newington, CT) - uckley ssociates Inc. 860-666-0555 MICHIGN Escanaba (*Schofield, WI) - Vyron Corporation 715-355-0200 Grand Rapids - Michigan ir Products 616-534-8000 Saginaw - Michigan ir Products 989-754-0409 *Troy - Michigan ir Products 248-837-7000 MINNESOT Luverne (Sioux Falls, SD) - Climate Systems Inc. 605-334-2164 *Minneapolis - TMS Johnson, Inc. 763-544-5442 Moorhead (*Fargo, ND) - Therm-ir Sales Corporation 701-282-9500 MISSISSIPPI Hernando (*Memphis, TN) - ir Components Inc. 901-382-1884 *Jackson - Ward Mechanical Equipment 601-956-3002 MISSOURI Kansas City (*Kansas City, KS) - Jorban-Riscoe ssociates Inc. 913-438-1244 St. Louis - H.C. Sharp Company Inc. 314-351-6900 Steele (*Memphis, TN) - ir Components Inc. 901-382-1884 MONTN Great Falls - Sound ir Inc. 406-727-8483 NERSK Omaha - Commercial ir Management 402-339-9177 NEVD Las Vegas - Norman S. Wright Mechanical Equipment 702-361-4212 Reno - Norman S. Wright Mechanical Equipment 775-826-8622 NEW HMPSHIRE *Manchester - uckley ssociates Inc. 603-669-3566 NEW JERSEY *Collingswood - Del-Ren ssociates Inc. 856-541-1776 Sayreville - DE Systems 732-553-0038 NEW MEXICO *lbuquerque - Mechanical Representatives Inc. 505-821-2563 NEW YORK *lbany - uckley ssociates Inc. 518-438-7423 *uffalo - H & V Sales Inc. 716-897-5010 *New York - DE Systems 516-568-6500 Rochester - Herman HVC Products LLC 585-219-5908 Syracuse - Herman HVC Products LLC 315-455-4901 131 Representative Directory - United States *Denotes representatives who carry local inventory www.greenheck.com Find My Rep

Representative Directory - United States 132 United States Representatives NORTH CROLIN sheville - Hoffman & Hoffman Inc. 828-296-0111 Charlotte - Hoffman & Hoffman Inc. 704-364-4700 *Greensboro - Hoffman & Hoffman Inc. 336-292-8777 Raleigh - Hoffman & Hoffman Inc. 919-781-8011 Wilmington - Hoffman & Hoffman Inc. 910-791-4775 NORTH DKOT *Fargo - Therm-ir Sales Corporation 701-282-9500 OHIO *Cincinnati - EP Inc. 513-489-9494 *Cleveland - ir Control Products Inc. 440-526-3020 *Columbus - ir Systems Diversified Inc. 614-291-0960 South Point (St. lbans, WV) - Mason & arry Inc. 304-755-0781 *Toledo - ir Control Products Inc. 419-380-8990 OKLHOM *Oklahoma City - Engineered Equipment 405-525-7722 Tulsa - iretech Corporation 918-665-6600 OREGON *Medford - Johnson ir Products 541-772-2690 *Portland - Johnson ir Products 503-234-5071 Vale (oise, ID) - Technical ir Products Inc. 208-377-2071 PENNSYLVNI Harrisburg - H & H Sales ssociates Inc. 717-796-2401 Philadelphia (*Collingswood, NJ) - Del-Ren ssociates Inc. 856-541-1776 *Pittsburgh - Pittsburgh ir Systems Inc. 412-539-1234 Scranton - Colman Sales Co. Inc. 570-587-1188 RHODE ISLND Providence (*oston, M) - uckley ssociates Inc. 781-878-5000 SOUTH CROLIN Cayce - Hoffman & Hoffman Inc. 803-765-9360 Charleston - Hoffman & Hoffman Inc. 843-884-3201 Greenville - Hoffman & Hoffman Inc. 864-676-1888 Lancaster (Charlotte, NC) - Hoffman & Hoffman Inc. 704-364-4700 SOUTH DKOT Sioux Falls - Climate Systems Inc. 605-334-2164 TENNESSEE Chattanooga - Hoffman & Hoffman Inc. 423-693-2890 Knoxville - Hoffman & Hoffman Inc. 865-450-9770 *Memphis - ir Components Inc. 901-382-1884 Nashville - JJP Mechanical Reps LLC 615-251-4555 *Denotes representatives who carry local inventory www.greenheck.com Find My Rep

United States Representatives TEXS *ustin - Mechanical Reps Inc. 512-444-1835 *Dallas - artos Industries 214-350-6871 El Paso - Mechanical Representatives Inc. 915-779-1212 *Fort Worth - artos Industries 682-253-0122 *Houston - H.D. Grant Company Inc. 713-668-8880 *Lubbock - David G. Halley & Co. Inc. 806-745-3405 *San ntonio - Mechanical Reps Inc. 210-650-9005 UTH Salt Lake City - Mechanical Products Intermountain 801-352-9003 VERMONT Montpelier (*lbany, NY) - uckley ssociates Inc. 518-438-7423 VIRGINI lexandria (*eltsville, MD) C.G. Wood Company Inc. 240-241-5300 Chesapeake - Hoffman & Hoffman Inc. 757-548-1700 Richmond - Hoffman & Hoffman Inc. 804-272-1500 Roanoke - Hoffman & Hoffman Inc. 540-725-8701 Temperanceville (Seaford, DE) - Ward-oland ssociates Inc. 302-629-7006 WSHINGTON *Seattle - Dorse & Company Inc. 206-284-2610 Spokane - Parmely & ssociates Inc. 509-443-1220 Vancouver (*Portland, OR) - Johnson ir Products 503-234-5071 WEST VIRGINI Martinsburg (Fredrick, MD) - Ward-oland ssociates Inc. 301-378-2853 Morgantown (*Pittsburgh, P) - Pittsburgh ir Systems Inc. 412-539-1234 St. lbans - Mason & arry Inc. 304-755-0781 WISCONSIN Eau Claire (*Minneapolis, MN) - TMS Johnson Inc. 763-544-5442 Green ay - Vyron Corporation 920-405-8822 Madison - Vyron Corporation 608-729-5690 Milwaukee - Vyron Corporation 262-783-3600 *Schofield - Vyron Corporation 715-355-0200 WYOMING Cheyenne (Fort Collins, CO) - CFM Company 970-493-7293 Cody (Great Falls, MT) - Sound ir Inc. 406-727-8483 133 Representative Directory - United States *Denotes representatives who carry local inventory www.greenheck.com Find My Rep

Representative Directory - Canada 134 Canada Representatives CND E.H. Price, Limited *Calgary 403-777-2790 *Dartmouth 902-468-1310 *Edmonton 780-477-9231 *Hamilton 905-383-3599 *Kelowna 250-765-7226 *London 519-451-5100 *Montreal 514-334-9804 *Ottawa 613-725-2029 Quebec 418-622-9946 *Regina 306-525-2367 Saskatoon 306-931-3316 Thunder ay 807-622-3311 *Toronto 905-660-0066 *Vancouver 604-777-1712 *Vancouver Island/Victoria 250-475-1500 *Winnipeg 204-982-2222 Global Mechanical Systems Ltd. New runswick & Prince Edward Island 506-857-4887 *Denotes representatives who carry local inventory www.greenheck.com Find My Rep

International Representatives LGERI Jacteco lgeria jacteco-alg@hotmail.com 213-205-36918 RGENTIN ir-technick SRL Cermac info@cermac-arg.com.ar 5411142923453 USTRLI Imagro ustralia Pty Ltd imagro@imagroaustralia.com.au 61-892863220 HMS Cors-ir ahamas info@cors-air.com 954-456-4300 HRIN wal Products Co. W.L.L. awalprod@batelco.com.bh 973-17813535 RUNEI enire Engineering PTE, Ltd benaire@singnet.com.sg 6567410280 CRIEN ISLNDS SEG Caribbean miami@saeg.com 305-718-8146 CHILE Termoingenieria Ltda. ventas@termoingenieria.cl 01156224218100 CHIN info@greenheck.com.cn COLOMI SEG Colombia colombia@saeg.com 571-614-9140 COST RIC Strong Internacional Centro merica ingenieria@sica.co.cr 50625895050 DOMINICN REPULIC SEG Dominican Republic saeg@iname.com 809-540-7234 ECUDOR SEG Ecuador xenriquez@saeg.com 305-718-8146 EGYPT Contact, Inc. info@contact-egypt.com 20227941517 EL SLVDOR Strong Internacional Centro merica wmedina@sica.co.cr 50322298939 GUM Norman S. Wright mcalad@norman-wright.com 671-475-3911 GUTEML Strong Internacional Centro merica atpsa@intelnett.com 502 2220-3508 HONDURS Strong Internacional Centro merica gromero@sica.co.cr 50425100833 HONG KONG Kwan Yick Engineering Company sales@kygroup.com.hk 852-2411-0289 INDI info@greenheck.co.in 135 Representative Directory - International www.greenheck.com Find My Rep

Representative Directory - International 136 International Representatives IRQ FJ Electrical Engineering & General Trading Ltd. fjtrdg@emirates.net.ae 964662252917 ISREL M.N. Engineering Co. main@mnengineering.co.il 97239798333 JPN RNK International Inc. rnkintl@usa.net 949-727-0970 JORDN Sources of Engineering Supplies Co. Ltd. sources@sourcesjo.com 96265525255 KZKHSTN LLP Zhana Tau Stroy main.lca@gmail.com 77272628475 KUWIT Gulf Facilities General Trading samjau@gft-kw.com 965-2575-7630 LENON ir Distribution Center S..R.L. sales@abclb.com 961-135-3823 MLYSI GT-Gulf (M) SDN HD pssong@gtgulf.com 603-7733-0212 MEXICO CNCUN Versa Rep. S.. de C.V. versarep@versamx.mx 529988432575 CHIHUHU Mechanical Representatives mechrepsep@aol.com 915-779-1212 DURNGO ND ZCTECS SL3 de Mexico S.. de C.V. bsl3mexico@gmail.com 523337190633 GUDLJR Proveedora Industrial Panamericana S.. de C.V. pipsa@pipsa.com.mx 52333774848 MEXICLI quasistemas Intergrales S.. de C.V. aquasistemas@aquasistemas.com.mx 526865567423 MEXICO CITY Versa Comercializadora S.. de C.V. ventas@versamx.mx 525556041377 MONTERREY Proveedora Termica del Norte S.. de C.V. info@proveedoratermica.com 528181257300 NICRGU Strong Internacional Centro merica ingenieria@sica.co.cr 505-2278-5256 OMN Khimiji Ramdas - /C Division sunilv.acp@khimjiramdas.com 968-24852777 PKISTN Khan rothers amankhan@khanbrothers.net 922-1345260025 PNM SEG Panama panama@saeg.com 5073002120 www.greenheck.com Find My Rep

International Representatives PERU SEG Peru peru@saeg.com 51-1-715-3880 PHILIPPINES Fahrenheit, Inc. fahrenheit_inc@yahoo.com 632-352-4213 PUERTO RICO Technical Distributors Inc. techdist@tech-dist.com 787-274-1818 QTR Gulf Facilities Trading Co. WLL gftqatar@qatar.net.qa 9744501152 SUDI RI l Saadeh Trading Establishment alsaadeh@alsaadeh.com 96614780643 SINGPORE SINGPORE io-pointe Pte. Ltd. bio_adm@biopointe.com.sg 65-6748-8911 enire Engineering PTE, Ltd benaire@singnet.com.sg 6567410280 REPULIC OF KORE CEIR Corporation acemtc@unitel.co.kr 822-598-2793 SRI LNK Techno-Maart (Pte) Ltd. tmaarthvac@sltnet.lk 94112432822 TIWN Techair Enterprise Co. Ltd. techair.com@msa.hinet.net 886-2-2731-9100 THILND Ventilation Engineering Co., Ltd. enquiry.venco@ensys.co.th 66253090602 TURKEY TC ir Trade Centre Ltd. STI act.turkey@airtradecentre.com 902122834510 UNITED R EMIRTES U DHI Faisal Jassim Trading Company LLC fjtrdg@emirates.net.ae 971-26219772 DUI Western Technological Equipments wtech@emirates.net.ae 97142994124 UNITED KINGDOM VES ndover Ltd info@ves.co.uk 08448156060 URUGUY Ingenieria Schellemberg S.R.L. ingenieria@schellmberg.com.uy 59822037200 VENEZUEL IMEX Importacion Y Exportacion info@imexacorp.com 9546475387 VIETNM Phat Tien Production Technology Co. Ltd. pt@phattienpro.com 848-38500 268 YEMEN l-rashed Trading Centre info@alrashed-ye.com 967-1680770 137 Representative Directory - International www.greenheck.com Find My Rep

Index 138 Page(s) COTINGS Louver Finishes 123 LabCoat 87 Coatings 127-128 CUSTOM COILS Coils 108 DMPERS MD-23 112 MD-33 112 MD-42 112 MD-42V 112 MS 112 R Series 115 CD 115 CFSD-211 111 CFSD-212 111 CRD-1 110 CRD-1LP 110 CRD-1WJ 110 CRD-1WT 110 CRD-2 110 CRD-501 110 CRD-60 110 CRD-60 110 CRD-60X 110 DFD-110 110 DFD-150 110 DFD-150x10 110 DFD-150x12 110 DFD-150x14 110 DFD-150x16 110 DFD-210 110 DFD-230 110 DFD-310 110 DFD-350 110 DFDF-310 110 DFDR-510 110 DFDTF-210 110 EM-10 114 EM-11 114 EM-12 114 EM-30 114 EM-31 114 EM-32 114 EM-40 114 EM-41 114 EM-42 114 ES-10 114 ES-11 114 ES-12 114 ES-30 114 ES-31 114 ES-32 114 ES-40 114 ES-41 114 ES-42 114 FH-43 113 FV-43 113 FD-100 110 Page(s) FD-110 110 FD-150 110 FD-150x10 110 FD-150x12 110 FD-150x14 110 FD-150x16 110 FD-300 100 FD-310 110 FD-350 110 FDR-510 110 FSD-211 111 FSD-212 111 FSD-213 111 FSD-231 111 FSD-311 111 FSD-311M 111 FSD-311V 111 FSD-312 111 FSD-312M 111 FSD-331 111 FSDR-511 111 FSDR-512 111 GFSD-211 111 GFSD-212 111 HD 115 H-110 114 H-120 114 H-230 114 H-240 114 H-330 114 HCD-120 114 HCD-130 114 HCD-135 114 HCD-140 114 HCD-220 114 HCD-230 114 HCD-240 114 HCDR-150 114 HCDR-250 114 HCDR-350 114 HCDR-351 114 HPR-120 115 HPR-230 115 HPR-330 115 HSD-401 111 ICD-44 112 ICD-45 112 IMO-310 115 IMO-311 115 MD-10 113 MD-10M 113 MD-15 113 MDR-50 113 ODFD-150 110 OFD-150 110 OFSD-211 111 OFSD-212 111 OFSD-311 111 OFSD-312 111 RDI / RDU 115 RD-10 113 RDR-50 113 Page(s) SER Series 115 SEDFD-210 110 SEDFDR-510 110 SEFSD-211 111 SEFSDR-511 111 SESMD-201 111 SESMDR-501 111 SEVCD-23 113 SEVCD-33 113 SMD-201 111 SMD-202 111 SMD-203 111 SMD-301 111 SMD-301M 111 SMD-301V 111 SMD-302 111 SMD-302M 111 SMD-401 111 SMD-401M 111 SMDR-501 111 SMDR-502 111 SSDFD-150 110 SSDFD-350 110 SSDFDR-510 110 SSFD-150 110 SSFD-350 110 SSFDR-510 110 SSFSD-211 111 SSFSDR-511 111 SSFSDR-512 111 SSIMO-310 115 SSIMO-311 115 SSSMD-201 111 SSSMDR-501 111 SSSMDR-502 111 SSWDR-53 114 VCD-15 113 VCD-18 113 VCD-20 113 VCD-20V 113 VCD-23 113 VCD-23V 113 VCD-33 113 VCD-33V 113 VCD-34 113 VCD-40 113 VCD-42 113 VCD-42V 113 VCD-43 113 VCD-43V 113 VCDR-50 113 VCDR-53 113 VCDRM-50 113 VCDRM-53 113 WD-100 114 WD-110 114 WD-120 114 WD-200 114 WD-210 114 WD-220 114 WD-300 114 WD-320 114 Page(s) WD-323 114 WD-330 114 WD-340 114 WD-400 114 WD-410 114 WD-420 114 WD-430 114 WDR-53 114 ELECTRICL Disconnect, Fire Stat, Motion Detector, Motor Starters, Speed Control, Switches, Thermostat, Time Delay, Transformers ENERGY RECOVERY 126 ERV 92-93 ERVe 92-93 MiniVent-450 94 MiniVent-750 94 FNS E 21 FDW 81, 83 S 21 CF 46-47, 53 CSW-FRP 82-83 DF 46-47, 53 IDW 81, 83 SQ 48-53 SQ-HP 48-53 CF 69 CSP 38-41 CSW 81, 83 CUE 10-15 CUE-HP 10-15 CUE-XP 10-15 CUE 10-15 CUE-HP 10-15 CW 10-15 CW-HP 10-15 CW 10-15 CW-HP 10-15 G 4-8 G 4-8 G-HP 4-8 IC 34-35 ICO 34-35 IP 84 IPO 84 IPW 84 L 18-20 LP 18-20 LD 18-20 LDP 18-20 MC 36 MCY 36 Plenum 85

Page(s) QEI-L, QEI-I/II 56-57 RCE 29-31 RCS 29-31 RE 29-31 RS 29-31 RU 22-23 RUMO 22-23 RCE3 29-31 RCS3 29-31 RDU 22-23 RE2 29-31 RS2 29-31 RSF 28 RSFP 28 SF 27 SCE 62-68 SCS 62-68 SE 62-68 SS 62-68 SCE 62-68 SCS 62-68 SE 62-68 SF 70-73, 83 SFD 70-73, 83 SP 38-41 SQ 48-53 SS 62-68 SW 76-80, 73, 83 SWD 74-75, 73, 83 TU-C 24-26 TU-L/H 24-26 TUD 24-26 TI-C 58-59 TI-FS 58-59 TC 54-55 TDI 58-59 USGF 16-17 USGF-HP 16-17 V 60 Vektor -H 86-87 GRVITY FGI 32-33 FGR 32-33 GRS 32-33 GRSF 32-33 RGU 32-33 WIH 121 WRH 121 INDOOR IR HNDLERS LFC 106-107 MSCF 106-107 VFC 104-105 VFCD 104-105 KITCHEN Controls and Energy Management 90 Page(s) External Supply Plenums 91 Fire Suppression 91 Grease Extraction 89 Hoods - Type I / II 88-89 - Condensate LOUVERS F-801 120 FJ-120 120 FJ-601 120 FJ-601X 119 FJ-801 120 FS-120 120 VC 121 VE 121, 42 VF 121 EC-401 118 EC-601 118 EC-601 118 EC-601D 119 ECC-401 118 ECC-601 118 ECN-601 118 ED-401 118 ED-601 118 ED-635 118 EDC-401 118 EDC-501 118 EH-401 118 EH-690 118 ECD-401 118 ECD-601 118 EDD-401 116 EDD-601 116 EDJ-202 116 EDJ-401 116 EDJ-430 116 EDJ-601 116 EDK-402 116 EDK-430 116 EDK-602 116 EHH-201 119 EHH-401 119 EHH-501 119 EHH-501X 119 EHH-601 119 EHH-601D 119 EHH-601PD 119 EHH-701 119 EHM-601 116 ESD-202 116 ESD-403 116 ESD-435 116 ESD-435X 119 ESD-603 116 ESD-635 116 ESD-635D 119 Page(s) ESD-635PD 119 ESD-635X 119 ESF-145 117 ESID-430 116 ESJ-150 117 ESJ-202 116 ESJ-401 116 ESJ-401RM 116 ESJ-602 116 ESJ-602RM 116 ESK-402 116 ESK-402RM 116 ESK-602 116 ESK-602RM 116 ESS-502D 119 ESU-130 117 ESU-130S 117 ESU-150 117 ESU-150S 117 EVH-201 119 EVH-401 119 EVH-501 119 EVH-602 119 EVH-602D 119 EVH-602X 119 EVH-660D 119 EVH-801 119 FD-402 120 FD-602 120 FD-635 120 FJ-402 120 FJ-602 120 FDS-402 120 FDS-602 120 FSJ-402 120 FSJ-602 120 GCE-202 118 GCE-402 118 GCI-202 118 GCI-402 118 SED-202 117 SED-401 117 SED-501 117 SEH-202 117 SEH-401 117 SES-202 117 SES-401 117 SEV-401 117 SEV-501 117 WIH 121 WRH 121 MKE-UP IR DG 96-98 DGK 96-98 DGX 96-98 DGX with PDX 96-98 IG 99-101 Page(s) IGK 99-101 IGX 99-101 IGX with PDX 99-101 KSF 102-103 KSFD 102-103 PCKGED ROOFTOP VENTILTION SYSTEMS RV 95 RVE 95 PRODUCT CCESSORIES 6x4 Transition 43 VE 42, 121 CRD 44, Damper Guard 64 EL-10x3 42 Filters 44, Filter ox 53 Grilles for SP 44 GRS 43 GRSF 43 Insulated Housing 53 KFCC 102 KSCP 102 Motor Side Guard 64 RCC-7 43 RDC 43 RFC-7 43 RJ 42 Wall Collar 64 Wall Housing 64 WC 42 Weatherhood 64 WL 42 Isolation ases 124 lsolators 44, 124 ROOF CURS daptors 125 TE 125 TI 125 TR 125 TS 125 GESR 125 GESS 125 GPE 125 GPEX 125 GPF 125 GPFHD 125 GPFHL 125 GPFV 125 GPI 125 GPR 125 GPS 125 Reducers 125 VCE 125 139 Index

P.O. ox 410 Schofield, WI 54476-0410 PRSRT STD US Postage PID Wausau WI Permit No 1300 Greenheck Quick Delivery Program Greenheck is known worldwide as the leading manufacturer of air movement and control equipment. We have achieved this leadership position by putting the customer first through our commitment to quality and service. Quick Delivery Our Quick Delivery program offers a variety of stock products in five strategically located warehouses across North merica. Our Distribution Centers are located in: Schofield, Wisconsin Dallas, Texas Sacramento, California Miami, Florida Greensboro, North Carolina In general, quick delivery stock orders entered by 1:00 p.m. CST will ship the same day. Orders entered after 1:00 p.m. will ship the next day. If any part of your QD order is out of stock in the distribution center closest to you, we will ship it from the next best location as soon as possible. Quick uild If your application requires one of our quick build product configurations, we offer a number of lead times to meet your needs. Each model shows the best lead time available: 1 day 3 days 5 days 10 days 15 days 25 days Look to Greenheck to meet your ventilation needs as the leader in the air movement and control industry. Our Commitment s a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications without notice. Specific Greenheck product warranties are located on greenheck.com within the product area tabs and in the Library under Warranties. Prepared to Support Green uilding Efforts P.O. ox 410 Schofield, WI 54476-0410 Phone (715) 359-6171 greenheck.com QD Volume 25 March 2014 IW Copyright 2014 Greenheck Fan Corp.