Rotary Switches & Positioners Automation Systems for Valves and Dampers
R Automax is a full service valve and damper automation company to the worldwide oil and gas, pulp and paper, chemical, processing and energy-related industries. We provide maximum value to the end user through a broad offering of products, services, application engineering and our systematic approach to automation. Automax s ISO 9001 certified manufacturing facilities, R&D department, engineering and corporate headquarters are located in Cincinnati, Ohio. Additional design and manufacturing of pneumatic actuators are located in Milan, Italy. Sales and service facilities are strategically located in industrial centers throughout the world. Automax Cincinnati Location: 11444 Deerfield Road, Cincinnati, Ohio 45242 Telephone: (513) 489-7800 Fax: (513) 489-5243 Web Site: http://www.automax-usa.com Email: actuators@automax-usa.com Positioner Assembly and Testing Cell Rotary Switch Assembly and Testing Cell
INDEX Quality, Dependability, and Productivity. Recognized as the leaders in position indication and positioning control, the Automax UltraSwitch, Aviator and APEX products provide unparalleled performance combined with ease of calibration and maintenance. Automax rotary position indicators and positioners have a proven track record in industries such as oil and gas, pulp and paper, and chemical processing to name a few. Hazardous location approvals and corrosion resistant materials make the Automax rotary position indicators and positioners ideal for even the most hostile environments. UltraSwitch GL/XL/PL Series Page 4-5 UltraSwitch GL/XL/PL Series Rotary Position Indicators The UltraSwitch series of position indicators provides a compact and economical package for both visual and remote electrical indication of valve position. Models are available in both die cast aluminum and non-metallic versions with UL and C-UL ratings suitable for NEMA 4, 4X and NEMA 4, 4X, 7 & 9 applications. AVIATOR Series Page 6-7 Aviator Rotary Position Indicator with Internal Pilot Solenoid The Aviator rotary position indicator enclosure with internal pilot solenoid coil provides a truly integrated package for both visual and electrical position indication as well as control of supply air to rotary actuators. Switch Options Page 7 AutoBrakits Page 7 APEX 5000 Metallic Series 6000 Non-Metallic Series Page 8-9 Switch Options An extensive range of both mechanical and proximity limit switches makes the UltraSwitch and Aviator the perfect choices for a wide range of applications. AutoBrakits Stainless Steel NAMUR mounting kits provide consistent and reliable direct coupling to NAMUR compliant actuators. APEX Modular Positioner Available in both die cast aluminum and non-metallic versions, the Apex positioner combines precise valve positioning with advanced features. A modular manifold base allows 3-15psi pneumatic control signals, or 4-20mA signals with the addition of the I/P module. Models are available for corrosion resistant applications and hazardous locations as defined by UL, C-UL, CENELEC, and SAA. APEX Options Page 10-11 APEX Options The modular design of the Apex positioner allows for the easy addition of position indicators, limit switches, transmitters, I/P modules, and a wide variety of control options.
UltraSwitch Position Indicators R GL Series The GL Series rotary limit switch enclosure provides a compact economical package for visual and remote electrical indication of valve position. The die cast aluminum housing is electrostatic powder coated and designed to meet NEMA 4X standards. The housing can also be configured for sanitary applications. 3 4 2 How To Order (Select from each column) 5 1 Features: 1 Quick-set spring loaded cams are extra wide and splined to allow tool free limit switch calibration. 2 Dual 1/2" conduit entries are standard, optional third entry is available. 3 Terminal Strip is multipoint and prewired. 4 Switches are available in a wide range of options. 5 Housing is die cast aluminum with internal and external electrostatic powder coating, designed to meet NEMA 4X standards. Pharos visual indicator for high contrast wide angle viewing NAMUR mounting shaft eliminates coupler and maximizes interchangeability. Captive stainless steel cover screws. Sanitary options include captive stainless steel hex head cover screws. Standard housing offers a no nooks and crannies design to facilitate washdown. Optional Prefix Model Cover Switches Asco Valves Options N - NAMUR Shaft E - Epoxy Coated H - 1/4" H.H. Bolts GL 1 - Flat 2 - Pharos C - Pharos 90 o 3-way D - Pharos 180 o 3-way E - Pharos 180 o Block Center 1 - (2) SPDT Mechanical 3 - (2) DPDT Mechanical 4 - (2) SPST Proximity 5 - (2) SPDT Proximity 8 - (2) P&F NAMUR Proximity G - (2) SPDT Mechanical-Gold Plated E - (2) SPDT Sabre Proximity P - (2) SPDT Phazer Proximity T - (2) SPST BRS Proximity A - EF8320G184 B - EF8321G001 C - EF8316G064 F - EF8345H003 G - EF8342C001 0 - NONE 3-3 Conduit Entries 4
UltraSwitch XL Series PL Series The XL series rotary limit switch enclosure provides a rugged heavy duty package for visual and remote electrical indication of valve position. The die cast aluminum housing has a dichromate undercoat and electrostatic powder top coat for superior corrosion resistance. The housing is suitable for NEMA 4, 4X, 7 & 9 locations and is available with optional position transmitters and a wide range of limit switch options. Optional 4-20mA transmitter shown The PL series offers many features similar to the XL series. The PL series housing is a non-metallic engineered resin and provides an excellent enclosure for harsh corrosive environments. Designed to meet NEMA 4X standards, the housing also features a unique labyrinth cover seal. Features: Pharos indicator for high contrast wide angle viewing. XL series utilizes a snap on design, PL series utilizes bolt on design. Quick set spring loaded cams are extra wide and splined to allow tool free limit switch calibration. Switches available in a wide range of options. Terminal strip is multipoint and prewired. Housing on XL series is die cast aluminum with dichromate undercoat and electrostatic powder topcoat, UL Listed and C-UL approved for hazardous locations. PL series housing is non-metallic and suitable for corrosive environments. Dual 3/4" conduit entries are standard. NAMUR mounting shaft eliminates coupling and maximizes interchangeability. Captive stainless steel cover screws. Potting compartments available on XL series for factory sealed leads. How To Order (Select from each column) Optional Prefix N - NAMUR Shaft *E - Epoxy Coated *B - NAMUR Shaft & Epoxy Coating Model XL - Aluminum PL - Zytel Cover 1 - Flat 2 - Pharos C - Pharos 90 o 3-way D - Pharos 180 o 3-way E - Pharos 180 o Block Center **U - Bolt on UltraDome Switches Analog Output 1- (2) SPDT Mechanical 3- (2) DPDT Mechanical 4- (2) SPST Proximity 5- (2) SPDT Proximity 7- (2) SPDT Go Proximity 8- (2) P&F NAMUR Proximity A- (2) SPDT Mechanical with cams for three position control G- (2) SPDT Mechanical-Gold Plated E- (2) SPDT Sabre Proximity P- (2) SPDT Phazer Proximity T- (2) SPST BRS Proximity Contact factory for additional options. * XL series only ** PL series only Contact factory if remote position indication is required 5 T - Transmitter 4-20mA A - Potentiometer 0-1k ohm B - Potentiometer 0-5k ohm C - Potentiometer 0-10k ohm Asco Solenoids 3 Way A - EF8320G184 B - EF8321G001 C - EF8316G6064 E - EF8316G074 4 Way F - EF8345H003 G - EF8342C001 H - EF8344G072 J - EF8344G074 K - EF83444G076 0 - None
Rotary Switch with Internal Pilot Solenoid R The Aviator rotary limit switch enclosure and solenoid valve provides an integrated package for position indication and control of supply air to rotary actuators. The housing is designed for hazardous locations and approvals are pending for NEMA 4, 4X, 7 & 9 and CENELEC EExd IIB. The aviator is designed for easy upgrading to the fieldbus communication protocols that are now being developed for applications of the future. 1 2 3 5 Features: 1 Internal Pilot Solenoid Coil offers the advantage of having the solenoid coil contained and protected within the Aviator housing. This provides a high degree of protection in hazardous environments and washdown applications. 2 Quick-set spring loaded cams are extra wide and splined to allow tool free limit switch calibration. 3 Switches are available in a wide range of options. 4 Corrosion Resistant Materials. All exposed parts are either stainless steel, anodized aluminum, or aluminum treated with dichromate undercoat and polyester electrostatic powder top coat. 5 Three 1/2 conduit entries are standard. Captive stainless steel cover screws. UltraDome visual position indicator provides high contrast wide angle viewing of valve position. Fieldbus Upgradability. The Aviator has been designed to accommodate the circuitry required to interface with various fieldbus protocols. NAMUR mounting shaft eliminates coupler and maximize interchangebility. 4 How To Order (Select from each column) Model Visual Indicator Switches Internal Pilot Solenoid Valve Spool Valve Configuration 1-3 Way Aluminum Shafts and Coatings External Pneumatics VX -Aviator U - UltraDome M1 (2) SPDT Mechanical Indicator MG (2) SPDT Mechanicalgold C - UltraDome plated 90 o 3-way R1 (2) SPDT Proximity D - UltraDome 180 o R4 (2) SPST Proximity 3-way E - UltraDome P1 (2) Sabre Proximity 180 o PP (2) Phazer Proximity Block Center B4 (2) BRS Proximity 0A - 110-50/60 Hz 0C - 220-50/60 Hz 0F - 12 VDC 0G - 24 VDC 0H - 12 VDC Low Power 0J - 24 VDC Low Power 0K - 15.5 VDC Intrinsically Safe 2-3 Way Stainless Steel 3-4 Way Aluminum 4-4 Way Stainless Steel P - Polyester Powder Coating and Standard Shaft E - White Epoxy Coating and Standard Shaft N - Polyester Powder Coating and NAMUR Shaft B - White Epoxy Coating and NAMUR Shaft X - Brass Exhaust Mufflers S - Stainless Steel Exhaust Mufflers T - Flow Control Valve for 3-way F - Dual Flow Control Valves for 4-way R - Thermo plastic rain caps 6
UltraSwitch Internal Switch Options UltraSwitch Mechanical Switches Type 1/ M1 (2) SPDT Mechanical 15 amp @ 125 VAC, 1/2 amp @ 125VDC Minimum 50mA Type G / MG (2) SPDT Mechanical Gold Plated Contacts 1 amp @ 125 VAC 1 amp @ 24VDC Minimum 1 ma Type 3 (2) DPDT Mechanical 15 amp @ 125 VAC Minimum 50mA Consult factory for DC voltages UltraSwitch Proximity Switches hermetically sealed for long life. Type 4 / R4 (2) SPST Proximity 0.35 amp @ 140 VAC, 1 amp @ 50 VDC Minimum 1mA Type 5 / R1 (2) SPDT Proximity 1/4 amp @ 120 VAC, 1/4 amp @ 28 VDC Minimum 5mA Type 8 (2) Solid State Pepperl & Fuchs Proximity Two wire NAMUR per DIN 19234 UltraSwitch High Performance Proximity Switches hermetically sealed for severe service and long life. Many additional switch options are available. Consult factory for details. Type E / P1 Sabre Switch (2) SPDT Proximity 1 amp @ 120 VAC, 1/2 amp @ 24 VDC Minimum 1mA Type P / PP Phazer II (2) SPDT Proximity 3 amp @ 120 VAC, 2 amp @ 24 VDC Minimum 50mA Type T / B4 BRS (2) SPST Proximity 3 amp VAC, 1/2 amp VDC Minimum 1mA AutoBrakits NAMUR mounting kits and NAMUR shaft options permit direct coupling of Automax limit switches or positioners to NAMUR actuators. Our NAMUR shaft options includes an integral alignment pin to ensure accurate fit between accessory and actuator. The kits feature stainless steel construction at an economical price. 7
APEX Positioner R Apex 5000 Metallic Series Apex 6000 Non-Metallic Series The Apex Series Positioner provides accurate valve positioning with advanced features. It may be used with 3-15 psi pneumatic control signals, or fitted with an optional currentto-pressure transducer for 4-20mA signal input. The Apex is available with many options including: limit switches, position feedback transmitter, speed controls, and our Pharos TM visual position indicator. The APEX 6000 series positioner features a non- metallic housing for superior corrosion resistance. All exposed components are either high strength engineered resin or stainless steel. The features and options for the APEX 6000 series are very similar to the APEX 5000 series. 1 APEX 6000 Non-Metallic Series 2 3 APEX 5000 Metallic Series Features: 1 Adjustable Gain (patented) allows positioner sensitivity adjustment without removing or replacing components. (Available on APEX 5000 series only) 2 Non-interactive Span adjustment with lockable rack & pinion reduces calibration time. 3 Spool Valves are available in low flow, hi flow and max flow versions to match actuator / valve load requirements. 4 Housing of APEX 5000 is die cast aluminum with dichromatic undercoat and electrostatic powder top coat. APEX 6000 series housing is non-metalic Noryl. (1) NAMUR mounting shaft option eliminates coupler. Captive Cover Screws permit calibration while minimizing the potential for lost screws. Optional Pharos Visual Position Indicator provides high contrast, wide angle viewing of valve position. Vibration Resistant. Low spool mass, outboard spool bearings, and locking calibration adjustments provide reliable operation under high vibration. Field Upgradeable. The Apex is field upgradeable to various electro-pneumatic options. Switches and/or a position transmitter are field installable by replacing the shaft and adding modular cards. (1) Noryl is a registered trademark of General Electric Co. 8 4
Pneumatic Positioners. APEX 6000 (top) APEX 5000 (bottom) shown with optional gages Electro-pneumatic Positioner. APEX 5100 shown with weather proof I/P housing Electro-pneumatic Positioner. APEX 5200 shown with explosion proof I/P housing Internal mechanical switches option Internal 4-20mA transmitter option Top mounted UltraSwitch for hazardous area transmitter and switch applications How To Order (Select from each column) Model Input Indicator Gauges Spool Valve Cam Options 5 6 0 3-15 PSIG 1 4-20mA Weather Proof *2 4-20mA Nema 4, 4X, 7 FM *4 4-20mA Intrinsically Safe FM 1 Flat 2 Pharos 3 4 5 None Gauges Stainless Steel Gauges 6 7 8 Low Flow Hi Flow Max Flow A B C D L Linear Linear 30, 45, 60, 90 Characterized Sqr, SqrRt, Lin 60 Degree Special cam and shaft for linear actuators F G H K M N P R T V X Y Transmitter 4-20mA Feedback 0-1K Ohm Feedback 0-10K Ohm 2 SPDT Mech. Switches 2 SPST Prox. Switches 2 SPDT Prox. Switches Viton Seals Epoxy Coated NAMUR Output Shaft Hex Cover Screws Block/Bleed Module Flow Control Module * Not recomended for APEX 6000 Series 9
APEX Modular Positioning System R Options PHAROS or Flat Position Indicators Limit Switches Type K SPDT Mechanlcal 10 amp 125VAC. 5amp 250VAC. 1/2amp 125VDC. 1/4 amp 250VDC. Type M SPST Proxlmlty 1/4 amp 200VDC. 1/2 amp 100VDC. 1 amp 50VDC..35 amp 1 40VAC. Max. Contact: 50 Walt Resistive Type N SPDT Proximity 1/4 amp @120VAC. 1/4 amp @ 28 VDC Minimum 5mA Position Transmitters Position Transmitters can be factory or field installed to provide a direct feed back from the positioner shaft. Leads are terminated within the electronic module. 2 Wire Current Output Signal Standard output signal: 4-20mA, 2 wire Power requirements: 6 to 30 VDC. Output loading: 0 to 750 ohms at 24 VDC Resistive Output Signal Standard output signal: 1000 ohms Power rating at 70 C: 1 watt Potentiometer Type: Conductive Plastic Rotational life (no electric load):10 million cycles Hazardous Location I/P Input 4-20mA I/P Housing NEMA 4X and 7 UL, C-UL, CENELEC, SAA Automatic supply pressure and ambient temperature compensation. LED loop power indication. Internal I/P filter regulator. 10 Non Hazardous Location I/P Input 4-20mA I/P Housing is corrosion resistant and weather proof. Automatic supply pressure and ambient temperature compensation. LED loop power indication. Internal I/P filter regulator.
APEX cam features and options Modules Limit Switch Option Transmitter Option (4-20 ma) Flow Control Module Block/Bleed Module 1/4 NPT Block The standard APEX cam (Designated by letter A ) Provides linear characterization. Allows 90 or 180 degree rotation. Accepts 3-15, 3-9 or 9-15 psi input. Is suitable for direct or reverse acting applications. Optional cams are available for: Squared or square root characterization. 30, 45, 60 or 120 degree rotation. Linear stroking valves. Custom cams are also available to meet specific application needs. Manifold (3-15 psi Input) 11 Optional Flow Spool Valves Interchangeable Low Flow, High Flow and Maximum Flow spool valves are available to match the Automax positioners to the actuator load. The selection of the appropriate spool valve is determined primarily by the required speed of response of the total package (i.e. Positioner, actuator and final element). The exact speed of response depends on the torque available from the actuator relative to the torque required by the load; the supply pressure; actuator spring force; etc. The low flow spool features slow-opening ports which reduce overshoot while decreasing sensitivity. High and Max flow spools feature quick-opening ports which maximize sensitivity but may cause overshoot in low torque applications (such as dampers).
Insofar as possible, every effort has been made to ensure that the information contained herein was correct at the time of printing. Products may differ as the result of the company policy of continuous product improvement. Subsidiairy of FLOWSERVE Corporation Web Site: http://www.automax-usa.com 11444 Deerfield Road Cincinnati, Ohio 45242 Phone: (513) 489-7800 Fax: (513) 489-5243 Email: actuators@automax-usa.com Automax Controls, Inc. Davco Equipment 120 Vinyl Court 1744 West 4th Street Woodbridge, Ontario L4L 4A3 Freeport, TX 77541 Phone: (905) 856-8568 Phone: (409) 239-3300 Fax: (905) 856-7905 Fax: (409) 239-2311 Deutsche Automax, GmbH Im Grossen Rohr Limburg 1 6250 GERMANY Phone: 49/6431 96610 Fax: 49/6431 966130 Worldwide Sales and Service Centers The Duriron Group 24 Underwood Ave. Botany, NSW 2019 AUSTRALIA Phone: 61/2 9666 3299 Fax: 61/2 9666 5210 Durco Valtek Asia Pacific 7 An Lin 1st Street Yen Chao, Kaohsiung TAIWAN Phone: 886/ 7 616 8519 Fax: 886/ 7 616 8846 Automax UK, LTD 26 Heathfield Stacey Bushes Milton Keynes MK12 6HR ENGLAND Phone: 44/1908 318200 Fax: 44/1908 312323 Automax Control sarl 9D, rue de la Sabliere 92230 Gennevillieres FRANCE Phone: 33/1 40800429 Fax: 33/1 47338590 Duriron S.p.A. Automax Division Via Prealpi, 30-20032 Cormano (Milano) ITALY Phone: 39/2 663251 Fax: 39/2 6151863 LCP0001-0 Automax South Africa Unit 2, 48, Forge Road Spartan SOUTH AFRICA P.O.Box 9134, Edleen Kempten Park 1625 Phone: 27/11 3943575 Fax: 27/11 3943536 Durco Valtek Asia Pacific 2 Tuas Ave. 20 Singapore 2263 Phone: 65/8630629 Fax: 65/8622800 12 Printed Printed USA In USA