Haworth prices in this book will increase on March 1, 2017 by 4% Intuity Benching North America Specification Guide / Price List June 2015
Electronic Update Page Intuity Benching Price List The table below lists all of the updates and addendums added to this price list since the original version was created. All Update pages will replace the existing pages within the document. All New pages will be placed at the back of the document. Link Date Page Description Click Here July 2015 September 2015 89, 96 New/Update July 2015 Price Lists pages added for Receptacles with USB Charging. September 2015 Addendum pages moved to pages 89 and 96. Click Here August 2015 84 Update Pricing correction for the Gap Filler Price List Page. Click Here August 2015 September 2015 85 New/Update July 2015 Price Lists page added for the Bin, Accessory Rail, Accessory Rail Mounting Bracket Kit (single and double sided). September 2015 Addendum Page moved to page 85. Click Here September 2015 106-118 New Price List Pages added for the Enhanced Power Modules with USB Charging. Click Here September 2015 3-66 New Specification Guide added before the Price List. Click Here September 2015 67-163 New Price List pages renumbered to match Specification Guide. Click Here November 2015 91, 99-102 Update Correction to Power Tap Lengths. Click Here May 2016 44 Update Dimensions added to data cutout. Click Here June 2017 29 Update Note added to communicate that Single and Double Gap Fillers are not Interchangeable. Click Here July 2017 59 Update Page updated to remove obsoleted monitor arms. Click Here October 2017 1A New Price List page for Monitors Arms added. This Haworth North American price book contains US list prices. Canadian customers can convert the US list price into their Canadian equivalent by going to www.haworth.com/canada to find the current Canadian multipliers. These multiplier factors allow you to convert the US list price into a Canadian list price.
Intuity Benching Specification Guide Table of Contents Building Intuity Benching in Five Easy Steps... 5 Product Statement of Line Intuity Benching.... 11 Product Details Intuity Benching Single Sided Starter Kit... 20 Single Sided Add-On Kit.... 21 Double Sided Starter Kit.... 22 Double Sided Add-On Kit.... 23 Worksurfaces... 24-25 Starter and Add-On Kits... 26 Critical Dimensions for Planning Single Sided Benching Applications.... 27 Double Sided Benching Applications... 28 Accessories Access Hatch Gap Filler, Accessory Rail, Bin and Mounting Brackets... 29 Return Leg Kit and Return Worksurface... 30 Bench End Leg Kit and Bench End Worksurface... 31 A Series Storage.... 32 Belong Electrical Components Power In Infeed Harness... 33 Base Feed Module: Architectural Concealed Hardwire Connection............................... 34 Internal Power Base AI Base Feed.... 35 Top Feed... 36 Belong Electrical Components Power Through Utility Tray Power Retrofit Kit... 37 Power Distribution Assembly (PDA) Connectivity... 38 Jumpers Power Connectors... 39 Belong Electrical Components Power Out Receptacles... 40 Power Taps.... 41 Power Tap Brackets... 42 Enhanced Power Module and Enhanced Power Module Brackets... 43 Cable Management Cable Capacities.... 44 Power Distribution for Hardwire Applications... 45 Product Application Intuity Benching Planning Models... 48 Single Sided Applications / Starter Kit.... 49 Single Sided Applications / Add-On Kit... 50 Double Sided Applications / Starter Kit... 51 Double Sided Applications / Add-On Kit... 52 Planning an In-Line SIngle Sided Benching Application Starter Kit, Add-On Kit and Worksurfaces... 53 Planning an In-Line Double Sided Benching Application Starter Kit, Add-On Kit and Worksurfaces.. 54 Column Leg Support / Double Sided Add-On Kit... 55 Planning with Intuity Worksurfaces... 56 Planning with Storage and Accessories Below Worksurface........................................ 57 Planning with Storage and Accessories Above Worksurface.... 58-59 Planning with Returns.... 60-61 Planning with Bench Ends... 62 Technical Specifications.... 64 Intuity Benching Specification Guide Table of Contents Intuity Benching 3
4 Intuity Benching This page intentionally left blank.
Product Overview Building Intuity Benching in Five Easy Steps Product Overview Building Intuity Benching in Five Easy Steps Intuity Benching 5
Building Intuity Benching in Five Easy Steps Product Overview Building Intuity Benching in Five Easy Steps Step One: Specify a Starter Kit Every Intuity Benching application begins with a Starter Kit. Intuity Starter Kits are available single or double sided. Includes two pair of fixed-height aluminum legs (straight or angled), support beam, rail, and worksurface support brackets. Starter Kit Power Options: Single Sided Starter Kits include an integrated below-surface Utility Tray, and may be specified with or without a Power Distribution Assembly (PDA) and Access Hatches. Double Sided Starter Kits may be specified with or without integrated below-surface Utility Tray, Power Distribution Assembly (PDA) and Access Hatches. Double Sided Starter Kit 6 Intuity Benching
Building Intuity Benching in Five Easy Steps Step Two: Specify Add-On Kits Add-On Kits attach to Starter Kits to create Intuity Benching Applications. Add-On Kits are available single or double sided. Includes shared leg, support beam, rail, and worksurface support brackets. Add-on Kit Leg Options: Single Sided Add-on Kits may be specified with straight or angled, fixed height, aluminum shared legs. Double Sided Add-on Kits may be specified with straight or angled, fixed height, aluminum shared legs, or with a fixed height, steel, Column Leg, which provides additional knee clearance and vertical wire management. Add-on Kit Power Options: Single Sided Add-on Kits include an integrated below-surface Utility Tray, and may be specified with or without a Power Distribution Assembly (PDA) and Access Hatches. Double Sided Add-on Kits may be specified with or without integrated below-surface Utility Tray, Power Distribution Assembly (PDA) and Access Hatches. Double Sided Starter Kit Double Sided Add-On Kit Product Overview Building Intuity Benching in Five Easy Steps Starter Kit Leg moved to end-of-run replaced with the Add-On Kit Shared Leg. Intuity Benching 7
Building Intuity Benching in Five Easy Steps Product Overview Building Intuity Benching in Five Easy Steps Step Three: Specify Worksurfaces Each Single Sided Starter Kit and Add-On Kits requires one separately specified Intuity worksurface. Each Double Sided Starter Kits and Add-On Kits require two separately specified Intuity worksurfaces. Specify nominal depths of Worksurfaces to match nominal depths of each Starter Kit and Add-On Kit (24" or 30" Nominal Depths). Starter Kits and Add-On Kits specified with the optional Access Hatches require a Worksurface For Use with Access Hatches, to accommodate the Access Hatches. Worksurfaces specified with the Knife Edge option require Starter Kits and Add-on Kits with Angled Leg option (Double SIded Add-On Kits with the Column Leg option will also accommodate Knife Edge Worksurfaces). Rectangular Worksurfaces For Use with Access Hatches (Each is Separately Specified) 8 Intuity Benching
Building Intuity Benching in Five Easy Steps Step Four: Specify Power Components and Cable Management Specify Power Components to distribute power In, Through and Out of the furniture. Specify Cable Management Components to route, conceal, mount and manage cables and electrical components. Power In Brings power from the building into the furniture. Infeed Harness Base Feed Module Architectural Concealed Internal Power Base AI Base Feed Top Feed Power Through Distributes power throughout the furniture. PDA (included with powered Starter Kits and Add-On Kits) Jumper (included with powered Add-On Kits) Utility Tray Retrofit Kits (Separately Specified, used to convert non-powered Utility Trays to powered) Power Out Distributes power out of the furniture to the user. Triplex Receptacles or Duplex Receptacles with USB Chargers. Power Taps/Power Tap Brackets Enhanced Power Modules Cable Management Routes, conceals, mounts and manages cables and electrical components. Utility Tray (Standard with single sided Starter Kits and Add-Kits, specified option available with double sided Starter Kits and Add-On Kits) Power Tap Brackets (Fixed/Adjustable/Under Surface) Base Feed Cover Vertical, Cord Manager Mesh, Conduit Clamp, Cable Chain, Wire Management Loop, Vertical Cable Guide POWER THROUGH Powered Starter Kit (Includes PDA and Utility Tray) POWER THROUGH Powered Add-On Kit (Includes PDA, Jumper and Utility Tray) Base Feed Cover (Separately Specified) Cable Management Product Overview Building Intuity Benching in Five Easy Steps POWER OUT Triplex Receptacles (Separately Specified) POWER IN Infeed Harness (Separately Specified) Note Single Sided Starter Kits and Add-On Kits include a Utility Tray. Double Sided Starter Kits and Add-On Kits may be specified with optional Utility Trays. Starter Kits with a Utility Tray may be specified with optional Power Distribution Assemblies (PDAs). All other Electrical Components (Power In and Power Out) and Wire Management components must be separately specified. Non-Powered Utility Trays may be converted to Power with the separately specified Utility Tray Retrofit Kit. Intuity Benching 9
Building Intuity Benching in Five Easy Steps Product Overview Building Intuity Benching in Five Easy Steps Step Five: Specify Screens, Lights and Accessories Specify Screens, Accessories and Lights for added privacy, organization and illumination. Specify Intuity Rail Mounted Screens to match nominal width of each Starter Kit / Add-On Kit. See Intuity Price List for all available Lights and other Accessories. 10 Intuity Benching
Product Statement of Line Intuity Benching Product Statement of Line Intuity Benching Intuity Benching 11
Product Statement of Line Intuity Benching Product Statement of Line Intuity Benching Single Sided Kits Single Sided Starter Kit Straight Leg Double Sided Kits Double Sided Starter Kit Straight Leg Single Sided Starter Kit Angled Leg Double Sided Starter Kit Angled Leg Single Sided Add-On Kit Straight Leg Single Sided Add-On Kit Angled Leg Double Sided Add-On Kit Straight Leg Double Sided Add-On Kit Angled Leg Double Sided Add-On Kit Column Leg Accessories Width Width Depth 48, 54, 60, 66, 72 Depth 48, 54, 60, 66, 72 24, 30 24, 30 Gap Filler Bin Accessory Rail Mounting Bracket Kit, Single Sided Accessory Rail Accessory Rail Mounting Bracket Kit, Double Sided Leg Kits Bench End Leg Kit Return Leg Kit Straight Leg Return Leg Kit Angled Leg 12 Intuity Benching
Product Statement of Line Intuity Benching Rectangular Worksurfaces Rectangular Worksurface For Use with Access Hatches Bench End Worksurface Product Statement of Line Intuity Benching Worksurfaces Return Worksurface Screens 6.875 3.5 Screen Rail Mounted 2.25 3.5 6.875 Belong Electrical Components 1.125 3.5 3.5 1.125 Top Feed 3-Circuit or 4-Circuit (2+2 and 3+1) 6.875 6.875 2.25 3.5 Top Feed Hardwired 6.875 Infeed Harness 3-Circuit or 4-Circuit 2.125 3.5 (2+2 and 3+1) 6.875 3.5 3.5 2.25 Base Feed Module Architectural Concealed Hardwire Connection 3-Circuit or 4-Circuit (2+2 and 3+1) Internal Power Base AI Base Feed 3-Circuit or 4-Circuit (2+2 and 3+1) 1.1 2.25 3.5 2.125 3.5 1.125 6.875 1.125 USB Charger Jumper 3-Circuit or 4-Circuit (2+2 and 3+1) 6.875 Utility1.1 Tray Power Retrofit Kit 3-Circuit or 4-Circuit (2+2 and 3+1) 6.875 2 Triplex Receptacles 15 AMP 3-Circuit or 4-Circuit (2+2 and 3+1) 3.5 Triplex Receptacles 20 AMP 3-Circuit or 4-Circuit (2+2 and 3+1) 15 Amp Duplex Receptacle with USB Charging Outlet 3-Circuit or 4-Circuit (2+2 and 3+1) Hardwire Kit Cover Plates.82 2 6.875 2.125 USB Charger 6.875 2.125 3.5 1.1 2 3.5 6.875 1.1 3.5 2 Base Feed Cover Vertical Fixed Height 6.875 6.875.82 Base Feed Cover Vertical Adjustable Height 2.25 3.5 1.125 Cord Manager Mesh 3.5 2.25 1.125 2 6.875 Intuity Benching 13
1.1 Product Statement of Line Intuity Benching Product Statement of Line Intuity Benching 6.875 Belong Electrical Components Power Taps and Power Tap Brackets 2 2 Power Tap Power Tap Hardwire Power Tap Corded Power Tap Bracket Adjustable Power Tap Bracket Under Surface 6.875 Power Tap Bracket Fixed 2.25 3.5 1.125 Enhanced Power Module With Plug Enhanced Power Module Hardwire Enhanced Power Module Bracket Enhanced Power Module Bracket Above Worksurface Fixed 6.875 3.5 Above Worksurface Adjustable 2.125 3.5 Enhanced Power Module Bracket Under Worksurface Fixed Belong Worksurface Accessories 1.1 6.875 EUAW_NV (Intuity) Cable Chain 2 14 Conduit Clamp Electrical and Communication Accessories Enhanced Power Modules and Brackets 3.5 2.82.82 Intuity Benching Wire Management Loop Vertical Cable Guide
Product Statement of Line Intuity Benching Open C Cubby Without Slots Open C Cubby With Slots Blotter Paper Tray Landscape Freestanding Tool Cup Hanging Sorter Mini Shelf Reference Shelf Small Right Hand Left Hand Reference Shelf Large Blotter Reference Shelf Base Tray Desk Top L-Screen Double Sided Desk Top Reference Shelf Screen Rail Accessory Kit Single Sided Product Statement of Line Intuity Benching Belong Work Tools Accessories Territory Screen End-of-Run with Slots Left Hand Right Hand Territory Screen End-of-Run without Slots Territory Screen Shared with Slots Territory Screen Shared without Slots Territory L-Screen with Slots Adjustable Document Holder Adjustable Footrest Left Hand Right Hand Territory L-Screen without Slots Adjustable Laptop Holder Lighting 360º 360º 300º 300º 180º Pixo Voyage without Occupancy Sensor Voyage with Occupancy Sensor Intuity Benching 15
Product Statement of Line Intuity Benching Product Statement of Line Intuity Benching A Series Credenzas One and One-Half High Credenzas with Drawers Materials: Laminate Case/Steel Front 48" Wide 48" W 24" Box/File Left 24" Open Right 60" Wide 60" W 24" 18" 24" 24" 30" 24" 30" 18" D 21" H 30" 18" D 30" Box/File Left 30" Open Right 21" H 30" Box/File Left 18" Open Right 24" Open Left 24" Box/File Right 18" Open Left 30" Box/File Right 36" 24" 36" Box/File Left 24" Open Right 18" 30" 30" 30" 30" Open Left 30" Open Right 24" 36" 24" Box/File Left 36" Open Right 15" Open Left 30" Box/File Center 15" Open Right 15" 30" 15" 72" Wide 72" W 18" D 21" H 18" 36" 36" 36" 36" 36" 18" 36" Box/File Left 36" Open Right 36" Open Left 36" Box/File Right 18" Open Left 36" Box/File Center GCLS-2172 GCLS-2160 18" Open Right GCLS-2160 GCLS-2160 GCLS-2172 16 GCLS-2172 Intuity Benching
Product Statement of Line Intuity Benching A Series Credenzas One and One-Half High Credenzas with Doors Materials: Laminate Case/Steel Front 48" Wide 48" W 24" Doors Left 24" Open Right 60" Wide 60" W 24" 30" 24" 30" 24" 18" D 30" 21" H 18" D 30" Doors Left 30" Open Right 21" H 30" Doors Left 18" Open Right 24" Open Left 24" Doors Right 18" Open Left 30" Doors Right 36" 18" 24" 36" Doors Left 24" Open Right 42" 24" 18" 42" Doors Left 18" Open Right 18" 30" Product Statement of Line Intuity Benching 30" 30" 30" Open Left 30" Doors Right 72" Wide 24" 36" 24" Open Left 36" Doors Right 18" 42" 18" Open Left 42" Doors Right 15" Open Left 30" Doors Center 15" Open RIght 15" 30" 15" 36" 36" 42" 30" 36" Doors Left 36" Open Right 42" Doors Left 30" Open Right 18" D 72" W 21" H 36" 36" Open Left 36" Doors Right 36" 18" 42" 36" 30" 18" 30" Open Left 42" Doors Right 18" Open Left 36" Doors Center GCWW-2172 18" Open Right Intuity Benching 17
Product Statement of Line Intuity Benching Product Statement of Line Intuity Benching Credenza Accessory Grommet X Series Mobile Pedestal and Accessories Box/File Mobile Pencil/Box/File Mobile Pencil Tray Dividers Pedestal Cushion Kit Pencil Drawer Steel Center Drawer Shallow Drawer 18 Intuity Benching
Product Details Intuity Benching Product Details Intuity Benching Intuity Benching 19
Product Details Intuity Benching Product Details Intuity Benching Single Sided Starter Kit Single SIded Starter Kit Rail/Inset Channel Access Hatches (Optional) Support Brackets Leg Accent Plate Single Sided Utility Tray Utility Tray End Cap Power Distribution Assembly (Optional) 3- or 4-Circuit Single Sided Starter Kit Leg Options: Straight Leg Angled Leg Single Sided Starter Kit Benching Application Single Sided Add-On Kit (Separately Specified) Single Sided Rail End Cap With Access Hatches Without Access Hatches Single Sided End-of-Run Leg (Left Handed) Optional Straight or Angled Leg available. Support Beam Mid-Span Support Single Sided End-of-Run Leg (Right Handed) Optional Straight or Angled Leg available. Starter Kit components repositioned to end-of-run in benching applications: Single Sided End-of-Run Leg (Right Handed) Rail End Cap Utility Tray End Cap Single Sided Starter Kit (Shown with Angled Leg Option) Starter Kit Leg moved to end-of-run replaced with the Add-On Kit Shared Leg. Note Single Sided Kits are standard with an integrated below-surface Utility Tray. The Power Distribution Assembly (PDA) is optional. Factory installed Access Hatches may be specified as an option with all Starter Kits and Add-on Kits. Access Hatches provide users access to below worksurface power components. 20 Intuity Benching
Product Details Intuity Benching Single SIded Add-on Kit Rail / Inset Channel Access Hatches (Optional) Support Brackets In-Line Junction Shared Leg Spacer Power Distribution Assembly (PDA) with Jumper (Optional) 3- or 4-Circuit Single Sided Add-on Kit Leg Options: Straight Leg Single Sided Add-On Kit Benching Application Single Sided Starter Kit (Separately Specified) Angled Leg Single Sided Add-On Kit (Shown with Angled Leg) Support Beam Mid-Span Support Single Sided Utility Tray Starter Kit components repositioned to end-of-run in benching applications: Single Sided End-of-Run Leg (Right Handed) Rail End Cap Utility Tray End Cap Product Details Intuity Benching Single Sided Add-on Kit Starter Kit Leg moved to end-of-run replaced with the Add-On Kit Shared Leg. Note Single Sided Kits are standard with an integrated below-surface Utility Tray. The Power Distribution Assembly (PDA) is optional. Factory installed Access Hatches may be specified as an option with all Starter Kits and Add-on Kits. Access Hatches provide users access to below worksurface power components. Intuity Benching 21
Product Details Intuity Benching Product Details Intuity Benching Double Sided Starter Kit Double SIded Starter Kit Access Hatches (Optional) Support Brackets Rail / Inset Channel Leg Accent Plate Double Sided Rail End Cap With Access Hatches Without Access Hatches Power Distribution Assembly (Optional) 3- or 4-Circuit Double Sided Utility Tray (Optional) Double Sided Utility Tray End Cap (Optional) Double Sided End-of-Run Leg (Left Handed) Straight or Angled Leg (Optional) Double Sided Starter Kit Leg Options: Straight Leg Angled Leg Double Sided Starter Kit Benching Application Double Sided Starter Kit (Shown with Angled Leg Option) Double Sided Add-On Kit (Separately Specified) Support Beam Mid-Span Support Double Sided End-of-Run Leg (Right Handed) Straight or Angled Leg (Optional) Starter Kit components repositioned to end-of-run in benching applications: Single Sided End-of-Run Leg (Right Handed) Rail End Cap Utility Tray End Cap Starter Kit Leg moved to end-of-run replaced with the Add-On Kit Shared Leg. Note Double Sided Kits are available with optional components: Below-surface Utility Tray Power distribution assembly (PDA) Worksurface access hatches are optional, if specified they are included with a Starter or Add-On Kit. Access hatches are factory installed. 22 Intuity Benching
Product Details Intuity Benching Double SIded Add-on Kit Support Brackets Rail / Inset Channel Access Hatches (Optional) In-Line Junction Shared Leg Spacer Power Distribution Assembly with Jumper (Optional) 3- or 4-Circuit Double Sided Add-on Kit Leg Options: Straight Leg Angled Leg Double Sided Add-On Kit Benching Application Double Sided Add-On Kit (Shown with Angled Leg Option) Column Leg Support Beam Mid-Span Support Double Sided Utility Tray (Optional) Starter Kit components repositioned to end-of-run in benching applications: Single Sided End-of-Run Leg (Right Handed) Rail End Cap Utility Tray End Cap Product Details Intuity Benching Double Sided Add-on Kit Double Sided Starter Kit (Separately Specified) Starter Kit Leg moved to end-of-run replaced with the Add-On Kit Shared Leg. Note Double Sided Kits are available with optional components: Below-surface utility tray Power distribution assembly (PDA) Worksurface access hatches are optional, if specified they are included with a Starter or Add-On Kit. Access hatches are factory installed. Intuity Benching 23
Product Details Intuity Benching Product Details Intuity Benching Worksurfaces Worksurfaces Rectangular worksurfaces are available with or without an access hatch. Rectangular Worksurface Depth Dimensions Rectangular Worksurface For Use with Access Hatches Nominal Depth Depth Width Wood Grain Direction Width Width Wood Grain Direction Nominal Size (Actual Size) 24 D (23.68 ) 30 D (29.68 ) Actual Depth 24 D Dimensions Nominal Size (Actual Size) 48 W (47.97 ) 48 W (47.97 ) 54 W (53.97 ) 54 W (53.97 ) 60 W (59.97 ) 60 W (59.97 ) 66 W (65.97 ) 66 W (65.97 ) 72 W (71.97 ) 72 W (71.97 ) 19.68" Actual Depth 30 D 25.68 Actual Depth 3/4" Finger Gap The Access Hatches are not included with the Intuity Worksurface (Access Hatches are an option with separately specified Starter Kits and/or Add-On Kits). Nominal Depth Width The Access Hatch is located at the back of the worksurface and has two hinged doors. Each door is half the nominal width of the worksurface. An Access Hatch provides easy access to the power distribution assembly (PDA) and Utility Tray, if specified. The 4 1/4 deep Access Hatch is a specified option available with Starter Kits and Add-On Kits. 24 Intuity Benching
Product Details Intuity Benching Worksurfaces Rectangular worksurfaces are available with a laminate or wood surface and a 3 mm Edgeband or Knife Edge trim option. Worksurfaces are available with a Standard or Green Core options. Surface, Edge and Core Options Catalog logic drives the worksurface and return worksurface surface, edge and core options. Top Options Surfaces Laminate Surface Wood Surface Edge Options Edge Laminate 3 mm Edgeband Laminate Knife Edge Option L W Option J F Catalog Logic: WBRA- -_ Top Option Edge Option Core Option Product/Catalog Number: Laminate Surface (Option L) Consists of 0.028 thick high-pressure laminate face and 0.028 thick phenolic backer. Wood Surface (Option W) Consists of 0.020 thick natural or recon veneer face and 0.020 thick resin backer. 3 mm Edgeband (Option J / K) (1 3/16 Thick Worksurface) Multiple Top Seams: 1mm Edgeband 3mm Radius Product Details Intuity Benching Worksurfaces Wood 3 mm Edgeband K Wood Knife Edge Note U Edge Option is only located on the user side of the Worksurface. Back and sides have 1 mm edge band Knife Edge is for use with Angled Legs, only; not for use with Straight Legs. Knife Edge (Option F / U) (1 3/16 Thick Worksurface) Multiple Top Seams: 1mm Edgeband 3mm Radius 0.375" (9.5mm) 2" (50mm) Core Options Core Standard Core Green Core Option S G 1 3/16 Standard Core (Option S) Engineered composite panel made with 100% recycled and/or recovered wood fiber bonded with resin. Worksurfaces with this core are compliant with GREENGUARD and ANSI/BIFMA Standards for Low Emitting Products. 1 3/16 Green Core (Option G) Engineered composite panel made with 100% recycled wood fiber or 100% post-consumer recycled wood waste bonded with no-added-urea formaldehyde resin. Worksurfaces with this core are compliant with GREENGUARD and ANSI/BIFMA Standards for Low Emitting Products. Intuity Benching 25
Product Details Intuity Benching Product Details Intuity Benching Starter and Add-on Kits Starter and Add-on Kits Starter and Add-On Kits include support beams with attached Mid-Span Support Brackets which support the worksurface and provide overall support to the kit integrity. The Starter Kit Legs provide end-of-run support and the Add-On Kit Legs provide inboard support for shared worksurface conditions. Single Sided Benching Application Rectangular Worksurfaces For Use with Access Hatches (Separately Specified) Mid-Span Support Starter Kit Leg Support Beam Single Sided Starter Kit Mid-Span Support Single Sided Add-On Kit Add-On Kit Leg Support Beam Starter Kit Leg Starter Kit Leg is moved to end of run Mid-Span Support Support Beam Double Sided Benching Application Rectangular Worksurfaces For Use with Access Hatches (Separately Specified) Mid-Span Support Support Beam Double Sided Add-On Kit Starter Kit Leg Add-On Kit Leg Starter Kit Leg Double Sided Starter Kit Starter Kit Leg is moved to end of run 26 Intuity Benching
Product Details Intuity Benching Critical Dimensions for Planning Single Sided Benching Applications Intuity Benching applications must adhere to clearance heights when planning lower storage to be located beneath the worksurface, utility tray and support beam. 28 high clearance from the underside of the Worksurface to the finished floor with the glide fully retracted. 25 7/16 high clearance from the underside of the support beam to the finished floor with the glide fully retracted. 21 7/16 high clearance from the underside of the utility tray to the finished floor with the glide fully retracted. Note Front View Straight and Angled Legs are 28 high with glide fully retracted; glide provides a 1/2 leveling adjustment. 13/16" 28" High to underside of worksurface with glide fully retracted. (Straight or Angled Leg) 2" Leg Width Top View Single Sided Benching Application Without Hatches 1 1/16" Between Back of Worksurface and Front of Rail End-of-Run Leg (Included with Stater Kit) Straight Leg Angled Leg Worksurface End-of-Run Leg (Included with Stater Kit) Straight Leg Angled Leg Glides provides 1/2" leveling adjustment (Glides with 1 1/2" leveling adjustment are available from eparts) 7 1/16" Back of Worksurface To Front Support Beam 25 7/16" 21 7/16" Underside Underside of Support of Utility Beam to Floor Tray to Floor Rail Worksurface Mid Span Bracket Mid Span Bracket 13 3/4" Back of Worksurface to Front of Mid-Span Bracket Support Beam Area of Detail Single Sided Benching Application (Top View) Support Beam Utility Tray Shared Leg (Included with Add-On Kit) Straight Leg Angled Leg 2 7/16" Between Back of Worksurface to Front of Utility Tray Shared Leg (Included with Add-On Kit) Straight Leg Angled Leg Product Details Intuity Benching Critical Dimensions for Planning 2 5/32" Edge of Worksurface to Inside of End Leg Top View Single Sided Benching Application With Hatches Rail 1" Edge of Worksurface to Inside of Shared Leg Mid Span Bracket Support Beam Hatch 7 1/16" Back of Hatch To Front Support Beam 3/4" Between Worksurface and Hatch End-of-Run Leg (Included with Stater Kit) Straight Leg Angled Leg Worksurface 9 3/4" Back of Worksurface to Front of Mid-Span Bracket Shared Leg (Included with Add-On Kit) Straight Leg Angled Leg 2 5/32" Edge of Worksurface to Inside of End Leg 1" Edge of Worksurface to Inside of Shared Leg Intuity Benching 27
Product Details Intuity Benching Product Details Intuity Benching Critical Dimensions for Planning Critical Dimensions for Planning Double Sided Benching Applications Intuity Benching applications must adhere to clearance heights when planning lower storage to be located beneath the worksurface, utility tray and support beam. 28 high clearance from the underside of the Worksurface to the finished floor with the glide fully retracted. 25 7/16 high clearance from the underside of the support beam to the finished floor with the glide fully retracted. 21 7/16 high clearance from the underside of the utility tray to the finished floor with the glide fully retracted. Note Front View 28" High to underside of worksurface with glide fully retracted. (Straight or Angled Leg) Top View Double Sided Benching Application Without Hatches 2 7/16" Back of Worksurface to Front of Utility Tray Straight and Angled Legs are 28 high with glide fully retracted; glide provides a 1/2 leveling adjustment. 1 1/16" Between Back of Worksurface and Front of Rail End-of-Run Leg (Included with Stater Kit) Straight Leg Angled Leg 13/16" End-of-Run Leg (Included with Stater Kit) Straight Leg Angled Leg 2" Leg Width Worksurface Glides provides 1/2" leveling adjustment (Glides with 1 1/2" leveling adjustment are available from eparts) Support Beam 7 1/16" Back of Worksurface To Front Support Beam Mid Span Bracket 25 7/16" 21 7/16" Underside Underside of Support of Utility Beam to Floor Tray to Floor Worksurface 3 5/8" Between Worksurfaces Worksurface Mid Span Bracket 13 3/4" Back of Worksurface to Front of Mid-Span Bracket Support Beam Utility Tray Shared Leg (Included with Add-On Kit) Straight Leg Angled Leg Column Leg Area of Detail Double Sided Benching Application (Top View) Rail Utility Tray Shared Leg (Included with Add-On Kit) Straight Leg Angled Leg Column Leg 2 5/32" Edge of Worksurface to Inside of End Leg 0.97" Edge of Worksurface to Inside of Shared Leg Top View Double Sided Benching Application With Hatches Support Beam Worksurface Mid Span Bracket Shared Leg (Included with Add-On Kit) Straight Leg Angled Leg Column Leg 2 1/2" Between Hatches Rail 7 1/16" Back of Hatch To Support Beam Hatches 3/4" Between Worksurface and Hatch 9 3/4" Back of Worksurface to Front of Mid-Span Bracket End-of-Run Leg (Included with Stater Kit) Straight Leg Angled Leg Worksurface 2 5/32" Edge of Worksurface to Inside of End Leg 1" Edge of Worksurface to Inside of Shared Leg 28 Intuity Benching
Product Details Intuity Benching PAGE UPDATE Click Here for Details Accessories Access Hatch Gap FIller Painted aluminum extrusion used to fill the gap between the Access Hatches of Starter Kits and Add-on Kits. Single sided Gap Filler includes one filler piece and the double sided Gap Filler includes two filler pieces The Access Hatch Gap Filler is not for use with Starter Kits or Add-on Kits specified without Access Hatches. It is optional for kits specified with Access Hatches, providing a cleaner aesthetic between the Access Hatches. Access Hatch Gap Filler Double Sided Intuity Starter Kit or Add-on Kit Specified with Access Hatches Note The design of Single and Double Gap Fillers are specific to each application and are not interchangeable. Intuity Starter Kit or Add-on Kit Specified with Access Hatches Product Details Intuity Benching Accessories Accessory Rail, Bin and Mounting Brackets The Accessory Rail and Bin provides additional storage through the Worksurface Access Hatches. Single or double sided bracket kits attach to the Rail/Inset Channel to support the Accessory Rail and the Bin. (All Components are separately specified) Only for use with Starter Kits or Add-on Kits with Access Hatches. Screen Access Hatch Worksurface Accessory Rail Mounting Bracket Kit, Single Sided Accessory Rail Mounting Bracket Kit, Double Sided Bin Accessory Rail Accessory Rail Mounting Bracket Kit, Single Sided or Double Sided Rail/Inset Channel (Included with Starter an Add-on Kits) Accessory Rail Bin Intuity Benching 29
Product Details Intuity Benching Product Details Intuity Benching Return Leg Kit and Return Worksurface Return Leg Kit A Return Leg Kit and a separately specified Return Worksurface may be used to create a return that can be attached to the front edge of a rectangular worksurface on an Intuity Benching Run. Specify Return Leg Kit depths to match depth of Return Worksurface (24" or 30" Nominal Depth). Straight Leg Kits are non-handed and Angled Leg Kits are available Left or Right handed to accommodate the orientation of the Return Worksurface. Intuity Benching Run Front Edge of Worksurface Brackets (Included with Return Leg Kit) Return Worksurface 28" Fixed Height (with the glide fully retracted) Return Leg Kits (Shown with Right Handed Orientation) Straight Leg 24" Deep Angled Leg 24" Deep (Right Handed Shown) Straight Leg 30" Deep Angled Leg 30" Deep (Right Handed Shown) A Return Worksurface combined with the separately specified Return Leg Kit may be used to create a return that can be attached to the front edge of a rectangular worksurface on an Intuity Benching Run. Specify Return Worksurface depths to match depth of Return Kits (24" or 30" Nominal Depth). User Side Edge Options 3 mm Edgeband On User Side Laminate (J) Wood (K) Knife Edge On User Side Laminate (F) Wood (U) 1 mm Edgeband On Sides and Back Return Worksurface (Separately Specified) Return Leg Kit (Separately Specified) Accent Plate (Included with Return Leg Kit) Glides provide 1/2" of leveling adjustment Intuity Benching Run Side 1 mm Edgeband Return Worksurface Back 1 mm Edgeband 1 3/16" Thick Dimensions Nominal Size (Actual Size) 48 W (47.97 ) 54 W (53.97 ) User Edge Knife Edge or 3 mm Edgeband 60 W (59.97 ) Side 1 mm Edgeband 24 D (23.68 ) 30 D (29.68 ) Return Leg Kit (Separately Specified) 30 Intuity Benching
Product Details Intuity Benching Bench End Leg Kit The Bench End Leg Kit may be used with a separately specified Bench End Worksurface to provide additional Worksurface area at the end of a Double Sided Intuity Benching run. The kit includes (2) fixed height steel legs and attachment hardware. Bench End Worksurface (Separately Specified) Note Bench End Legs Accent Plate must be removed prior to installation of the Bench End Leg Kit. Bench End Worksurface The Bench End Worksurface may be combined with the Bench End Leg Kit to provide additional Worksurface area at the end of a Double Sided Intuity Benching run. Knife Edge option for use with Knife Edge Primary Worksurfaces, includes Knife Edge on all three user edges. 1 3/16" Thick Bench End Worksurface Attachment Hardware Intuity Double-Sided Benching Run Intuity Double-Sided Benching Run The Leg is Fixed Height, Glide provides 1/2" of leveling adjustment 24 W (23.68 ) Dimensions Nominal Size (Actual Size) 51 D (50.97 ) 28" High (with the glide fully retracted) 1 3/16" Thick Worksurface 63 D (62.97 ) Product Details Intuity Benching Bench End Leg Kit and Bench End Worksurface Bench End Leg Kit (Separately Specified) 30 W (29.68 ) Use With 48" Wide (Nominal Width) Intuity Double Sided Benching Run Use With 60" Wide (Nominal Width) Intuity Double Sided Benching Run Intuity Benching 31
Product Details A Series Storage Product Details Intuity Benching A Series Credenzas One and One-Half High A Series Credenzas One and One-Half High Intuity Benching may be combined with freestanding A Series Storage Credenzas, as long as they do not interfere with Intuity Benching components (Legs, Utility Tray, Support Beam, etc.). A 1 1/2 High A Series Credenzas (21" High with glides fully recessed) may be placed under an Intuity Starter Kit or an Add-on Kit with a Utility Tray (The underside of the Utility Tray is 21 7/16" from the floor, with all glides fully recessed). A Series Credenzas should always be freestanding when used with Intuity Benching. Brackets should not be used to attach credenzas to Intuity Benching Applications. Credenzas can not be used to support Intuity Benching. Dimensions Single Sided Intuity Benching Application with an A Series Credenza Single Sided Intuity Starter Kits and Add-on Kits include a below worksurface Utility Tray 7/16" Clearance (with all glides fully recessed) 21 7/16" Underside of Utility Tray to Floor 21 7/16" Underside of Utility Tray to Floor 21" High A Series Credenza (1 1/2 High) Glides for A Series Credenzas provide 1" leveling adjustment. 21" High A Series Credenza (1 1/2 High) 48", 60" or 72" Nominal Depths 24" or 30" Nominal Depths Glides for Intuity Starter Kits and Add-on Kits provide 1/2" leveling adjustment. Dimensions Double Sided Intuity Benching Application with an A Series Credenza 7/16" Clearance (with all glides fully recessed) Double Sided Intuity Starter Kits and Add-on Kits are available with or without a below worksurface Utility Tray 48" or 60" Nominal Depths Glides for A Series Credenzas provide 1" leveling adjustment. Glides for Intuity Starter Kits and Add-on Kits provide 1/2" leveling adjustment. 48", 60" or 72" Nominal Depths! Tip The clearance between the Credenza Top and the underside of the Utility Tray is 7/16" with all glides fully recessed. The leveling adjustment range of the A Series Credenza glide is 1", if the glides were fully extended the Credenza Top would interfere with the underside of the Utility Tray. Worksurfaces will interfere with access to Storage Areas when Credenzas are placed under the benching Run. Avoid placing the drawer/door section of a Credenza directly underneath an Intuity Worksurface to avoid access problems. 32 Intuity Benching
Product Details Belong Electrical Components Power In Infeed Harness The Infeed Harness is used to transition building wiring to modular power within the furniture. One end is hardwired to the building wiring and the modular end snaps into the power distribution assembly (PDA) in the furniture. This connection may be used to bring power in from the wall, ceiling, floor or column. Specification Tips For use with all Intuity Starter Kits or Add-on Kits equipped with a Power Distribution Assembly (PDA). Conduit can be concealed with separately specified Base Feed Cover Vertical or Cable Chain. Cord Manager Mesh may be separately specified to cover any galvanized metal conduit. Conduit can enter the Powered Utility Tray anywhere along the tray. Modular connector plugs into receptacle site on left side of the Power Distribution Assembly (PDA) or can attach to a power connector site on right side of PDA. Power Locations: Floor Column Wall Harness Lengths: 87" 180" 300" Modular Connector Galvanized Metal Conduit Hardwire Connection POWER IN Product Details Belong Electrical Components Power In Infeed Harness Base Feed Cover Vertical (Separately Specified) Infeed Harness Intuity Benching 33
Product Details Belong Electrical Components Power In Product Details Belong Electrical Components Power In Base Feed Module Base Feed Module: Architectural Concealed Hardwire Connection The module is used to transition building wiring to modular power within the furniture. The module s junction box is mounted to the furniture and its modular connector snaps into the Power Distribution Assembly (PDA). Field supplied conduit is used to bring power from the building to the junction box, allowing for some versatile applications. Specification Tips For use with all Intuity Starter Kits or Add-on Kits equipped with a Power Distribution Assembly (PDA). Conduit can be concealed with Separately Specified Base Feed Cover Vertical, Cable Chain or Column. Conduit can enter the Powered Utility Tray anywhere along the tray. Modular connector plugs into a receptacle site on left side or can attach to a connector site on right side of PDA. Power Locations: Floor Column Wall POWER IN Galvanized Metal Conduit Junction Box Base Feed Module: Architectural Concealed Hardwire Connection Base Feed Cover Vertical (Separately Specified) 34 Intuity Benching
Product Details Belong Electrical Components Power In Internal Power Base AI Base Feed The module is used to make plug-and-play connections between Power Base AI underfloor modular power components and the power distribution assembly (PDA) in furniture. Specification Tips For use with all Intuity Starter Kits or Add-on Kits equipped with a Power Distribution Assembly (PDA). Can only be connected to Power Base AI underfloor power system. Attaches at receptacle or right hand power connector site on PDA and to a Power Base AI underfloor power system. Conduit can be concealed with separately specified Base Feed Cover Vertical, Cable Chain or Column. Cord Manager Mesh may be separately specified to cover any galvanized metal conduit. Conduit can enter the Powered Utility Tray anywhere along the tray. Power Locations: Power Base AI Lengths: 64" 144" 300" Modular Connector Power Base AI Modular Connector POWER IN Galvanized Metal Conduit Internal Power Base AI Base Feed Base Feed Cover Vertical (Separately Specified) Product Details Belong Electrical Components Power In Internal Power Base AI Base Feed Intuity Benching 35
Product Details Belong Electrical Components Power In Product Details Belong Electrical Components Power In Top Feed Top Feed The Top Feed mounts to a worksurface and routes power and communications cabling from the ceiling to the Utility Tray in the furniture. Specification Tips For use with Intuity Benching applications equipped with Powered Utility Tray(s). Floor Mount Top Feed anchors to floor and the ceiling and back of worksurface. Modular connector plugs into receptacle or right hand power connector site on Power Distribution Assembly (PDA). Wire harness length is 180 (4572 mm) regardless of pole length. Conduit can enter the Powered Utility Tray anywhere along the tray. POWER LOCATION Single Sided Application POWER IN Double Sided Application Side View 10 and 12 Ceilings POWER IN Floor Mount Side View Floor Mount Floor Mount Must be anchored to floor with field supplied fasteners. 36 Intuity Benching
Product Details Belong Electrical Components Power Through Utility Tray Power Retrofit Kit Intuity Starter Kits or Add-on Kits with Utility Trays may be specified as powered (includes PDA) or non-powered (doesn't include PDA). Non-powered Utility Trays may be converted to powered Utility Trays by field installing a separately specified Utility Tray Power Retrofit Kit. Specification Tips When adding retrofit kit, order PDA mounting brackets, service part #2305-8603, separately. Power Location: Inside Non-Powered Utility Trays Lengths: 48" 54" 60" 66" 72" POWER THROUGH Single Sided Utility Tray (Included with all Single Sided Starter Kits and Add-on Kits) Utility Tray Power Retrofit Kit (Field installed Power Distribution Assembly) Double Sided Utility Tray (Optional with all Double Sided Starter Kits and Add-on Kits) Utility Tray Power Retrofit Kit (Field installed Power Distribution Assembly) Receptacle (Separately Specified) Receptacle (Separately Specified) Jumper (Separately Specified) Jumper (Separately Specified) Product Details Belong Electrical Components Power Through Utility Tray Power Retrofit Kit Note Do not mix 3-Circuit and 4-Circuit components. Intuity Benching 37
Product Details Belong Electrical Components Power Through Product Details Belong Electrical Components Power Through Power Distribution Assembly Connectivity Power Distribution Assembly (PDA) Connectivity To distribute power through the Utility Tray an Optional Power Distribution Assembly (PDA) is required. The PDA is used to connect all other electrical components. The PDA has two power connector sites at each end. The power connector sites on a PDA provide for the connection of connectors or some infeeds. The receptacle sites are used for receptacles and the connection of infeeds. Single Sided Utility Tray (included with Intuity Single Sided Starter Kits and Add-On Kits) POWER THROUGH Double Sided Utility Tray (Optional with Intuity Double Sided Starter Kits and Add-On Kits) POWER THROUGH Note Power Connector Site Use with: Jumpers Power Taps Some Infeeds Power Connector Site Use with: Jumpers Power Taps Infeed Harness Concealed Base Feed AI Base Feed Receptacle Sites Not accessible DON'T Left DON'T Right Left DO Receptacle Sites Use with: Receptacles Infeeds Jumpers Power Taps Right Do not mix 3-Circuit and 4-Circuit components. Power Connector Site For use with Jumpers only. Power Connector Site For use with Jumpers only. DO Power Connector Site For use with Jumpers only. DO DO Power Connector Site For use with Jumpers only. Left Left Right Receptacle Sites Use with: Receptacles Infeeds Jumpers Power Taps Right DON'T DON'T Receptacle Sites Use with: Receptacles Infeeds Jumpers Power Taps Power Connector Site Use with: Jumpers Power Taps Infeed Harness Concealed Base Feed AI Base Feed Power Connector Site Use with: Jumpers Power Taps Infeed Harness Concealed Base Feed AI Base Feed 38 Intuity Benching
Product Details Belong Electrical Components Power Through Jumpers Power Connectors Jumpers are for use in Intuity product reconfigurations to connect between Power Distribution Assemblies (PDAs) mounted in the Utility Trays of Starter Kits and Add-on Kits. Specification Tips One Jumper is included with powered Add-on Kits. Jumpers may be field installed in Power Connector Sites or Receptacle Sites on the Power Distribution Assemblies (PDAs). Common planning length: in-line connections between a Starter Kit and an Add-on Kit or between an Add-on Kit and another Add-on Kit requires a 24" long Jumper (Kits must be specified with a powered Utility Tray). Power Location: Between Powered Utility Trays Intuity Application Between a Starter Kit and an Add-on Kit Between a Add-on Kit and an Add-on Kit Tips Common Jumper Planning Length: Requires a 24" Long Jumper Requires a 24" Long Jumper Jumpers cannot be coupled together. Jumpers are sized specific to the application. Single Sided Utility Trays (Included with all Single Sided Starter Kits and Add-on Kits) Double Sided Utility Tray (Optional with all Double Sided Starter Kits and Add-on Kits) Power Distribution Assembly (PDA) POWER THROUGH Jumper (24" Length) Modular Connector Power Distribution Assembly (PDA) Power Distribution Assembly (PDA) Modular Connector Galvanized Metal Conduit Product Details Belong Electrical Components Power Through Jumper Power Connectors Jumper (24" Length) Power Distribution Assembly (PDA) Note Do not mix 3-Circuit and 4-Circuit components. Intuity Benching 39
Product Details Belong Electrical Components Power Out Product Details Belong Electrical Components Power Out Receptacles mmon lated Receptacles Receptacles attach to the Power Distribution Assembly (PDA) to allow access to the circuits carried through a Utility Tray. The 3-Circuit 15 Amp receptacles have a circuit programmable feature that allows each receptacle to access either circuit 1, 2, or 3 in the field by simply sliding the connector to one of three positions. POWER OUT Note 15 AMP 3-circuit Single Sided Utility Trays (Included with all Single Sided Starter Kits and Add-on Kits) 15 Amp 20 AMP 4-circuit Do not mix 3-Circuit and 4-Circuit components. 20 Amp common common isolated isolated Specification Tips 15 Amp receptacle configuration is NEMA 5-15R. 20 Amp receptacle configuration is NEMA 5-20R. 3-Circuit 20 Amp and 4-Circuit receptacles have fixed circuit access and are not field programmable. Specify appropriate number of receptacles for each circuit. Specify common ground or isolated ground. 3-Circuit 15 Amp Programmable Receptacle POWER CONFIGURATION 20 AMP 4-circuit 3-Circuit 20 Amp and 4-Circuit (2+2 / 3+1) 15 and 20 Amp Receptacles RECEPTACLE IDENTIFIER 4 Circuit 2 + 2 1 2 3 4 4 Circuit 3 + 1 A B C D 3-Circuit (20 Amp) I II III NA Power Distribution Assembly (PDA) common isolated Jumper (24" Length) Receptacles Receptacles Double Sided Utility Tray (Optional with all Double Sided Starter Kits and Add-on Kits) Power Distribution Assembly (PDA) Jumper (24" Length) Receptacles 40 Intuity Benching
Product Details Belong Electrical Components Out Power Taps Power Taps provide three 15A receptacle outlets in a housing that can attach to a separately specified Power Tap Bracket. Power Tap Brackets can be mounted to the edge or bottom of a worksurface. Specification Tips 15 Amp receptacle configuration is NEMA 5-15R. Specify appropriate number of Power Taps for each circuit. Required mounting bracket is separately specified. Available in conduit (3- or 4-circuit), hardwire and corded versions. Note Power Tap applications should be reviewed by local authorities (electrical inspector) prior to ordering due to varying local codes. Powered Utility Tray (With PDA) Power Base Connector Horizontal Power Tap / Power Tap Bracket Fixed Conduit Power Base Connector Hardwire Conduit Hardwire Corded Corded Product Details Belong Electrical Components Power Out Power Taps and Power Tap Brackets Vertical Vertical Vertical Horizontal Horizontal Horizontal Intuity Benching 41
Product Details Belong Electrical Components Out Product Details Belong Electrical Components Power Out Power Tap Brackets 4-circuit common isolated Note Power Tap Brackets Power Taps require a separately specified Power Tap Bracket to attach to worksurfaces. Brackets allow access above or below the worksurface. Above The Worksurface Applications Power Tap Bracket - Fixed Note Power Tap Bracket - Adjustable + = Power Tap - Horizontal Corded or Conduit Power Tap Bracket Fixed may be used with Intuity Benching applications with or without Access Hatches. OR Horizontal Power Tap / Power Tap Bracket Fixed + = Power Tap - Horizontal Corded or Conduit Power Tap Bracket Adjustable may only be used with Intuity Benching applications without Access Hatches. Horizontal Power Tap / Power Tap Bracket Adjustable Reside Power SOL (Hatch) 42 Intuity Benching
Product Details Electrical Components Out Enhanced Power Module The Enhanced Power Module is designed to deliver electrical and data access, and may be specified corded with a plug or hardwired. Requires separately specified brackets, that accommodate 1 3/16" (30 mm) to 2" (51 mm) thick worksurfaces and provide above or below the worksurface power access. Above The Worksurface Applications Enhanced Power Module Bracket Above Worksurface Fixed Note Enhanced Power Module Bracket Above Worksurface Fixed may be used with Intuity Benching applications with or without Access Hatches. Below The Worksurface Applications Enhanced Power Module Bracket Under Worksurface Fixed Enhanced Power Module Corded With Plug Enhanced Power Module Bracket Above Worksurface Adjustable Note Enhanced Power Module Hardwire Enhanced Power Module Bracket Adjustable may only be used with Intuity Benching applications without Access Hatches. Product Details Belong Electrical Components Power Out Enhanced Power Module and Brackets Note Enhanced Power Module Bracket Under Worksurface Fixed may be used with Intuity Benching applications with or without Access Hatches. Intuity Benching 43