VT - 450 / 650 Vertical Turning Center 12-24 Chuck with Quick Turret Type
2 HWACHEON CATALOG : VT-450 / 650 1 1
Vertical Turning Center 3 VERTICAL TURNING CENTER 12"-24 CHUCKER QUICK TURRET TYPE 12 24 Vertical Turning Center for Mass Production VT-450/650 turning centers reducing cutting time, the rigid high-speed tool turret is durable with high speed indexing, providing consistent and stable machining performance most suitable for mass production. 1 Brake Hub / Automobile / GC300 2 Pressure Plate / Automobile / GC250 3 Valve Body / Plant Industry / SCW410 4 Brake Drum / Automobile / GC250 5 Brake Disk / Automobile / GC200 2 3 4 5
4 HWACHEON CATALOG : VT-450 / 650 HEAVY DUTY MACHINING STABILITY VT-450/650 turning centers have been the preferred choice for many Manufacturers around the world. They have demonstrated exceptional capabilities by machining brake discs, brake drums, hubs and valves. The one piece machine bed design limits thermal distortion and absorbs vibration effectively and it guarantees high surface quality and precision at high speed. These turning centers can be ordered with the spindle on the left or the right side, or as double machine where the operator can work on two machines with one control. The fast and effective chip disposal and the environment friendly oil-water separation design will make your production more efficient and cost effective.
Vertical Turning Center 5 +4 Scale : 1 μm / 1grid +3 +2 0.6 μm +1 0-1 - 2-3 - 4 2.5mm 5mm 7.5mm 10mm Roundness (VT-450) 0.6μm Surface Roughness (VT-450) Ra : 0.197μm Rz : 1.68μm Rmax : 1.88μm Tool : DNMG150608 Material : Brass External diameter : 100mm Cutting depth : 0.1mm Spindle RPM : 1,000rpm Feedrate : 0.06mm/rev Highly Rigid and Durable One Piece Frame Structure The VT - 450/650 turning centers have a one piece bed frame for excellent vibration absorption, it guarantees high precision and surface quality at high speed turning thanks to the frame's ability to limit thermal distortion. The Z-axis guide is built in box way design, the X-axis is designed with linear Roller Guides for precision and rigidity to keep machine fast, sturdy and stable during long hours of operation.
Vertical Turning Center 6 Interference Free Operation The max. turning diameter zone is designed to provide interference free operations. Providing same max. diameter at full length even on larger workpieces. * Unit: mm(inch) Swing Over Bed : Ø610(24.02 ) VT-450 Max. Cutting Diameter : Ø460(18.11 ) Max. cutting length : 460(18.11 ) Swing Over Bed : Ø900(35.4 ) VT-650 Max. Cutting Diameter : Ø800(31.50 ) Max. cutting length : 750(29.53 ) 12 inch chuck 18 inch chuck Environment-Friendly Design To prevent the lubrication oil from dripping on the workpiece surface during dry cutting, the cutting area and moving machine parts are completely separated. The environment-friendly machine design drains the lubricant oil separately and is eliminating the need for a separator unit. Complete separation of coolant and oil Lubricant Zone 1 Zone 2 Coolant Cutting area Slide cover Coolant Feed area Drain tank Coolant tank Lubricant
Heavy Duty Machining Stability 7
8 HWACHEON CATALOG : VT-450 / 650 USER FRIENDLY DESIGN, A WIDE RANGE OF OPTIONAL FEATURES VT-450/650 turning centers are designed with the end user in mind. The user-friendly machine design and a variety of supplementary options made for stronger, faster, and more precise machining performance. Changing tools is convenient when the ATC returns to its parking position, according to the side access door (VT-650) L-HTLD: Hwacheon Lathe Tool Load Detect System (Option) The Hwacheon Lathe Tool Load Detect System constantly detects and diagnoses the tool load under process to prevent tool wear and damage, and to keep your machine and tools in optimal shape. High Torque Gear Box(Option) Power is delivered to the spindle through a two speed transmission allowing high spindle speed as well as powerful low torque Load Detection Limit 1 Load Detection Limit 2 Alarm + Feed Hold > When the LIMIT 1 Alarm sounds, the system holds the feed and the machine goes into standby. Alarm + Machine Stop > When the LIMIT 2 Alarm sounds, the system stops the machine, and must be reset to operate it.
Product data 9 Product Data * Unit: mm(inch) VT-450/2SP 332(13.07 ) 1,866(73.47 ) 1,806(71.1 ) 350(13.78 ) 220(8.66 ) 1,806(71.1 ) 2,417(95.16 ) 2,197(86.5 ) 1,590(62.60 ) Front Right side VT-650/2SP VT-650/2SP Width : 3,450(135.82") VT-650/R,L Width : 2,890(113.78") Height : 3,143(123.5") 2,880(113.39 ) 2,548(100.32 ) 1,700(66.93 ) 1,351(53.19 ) 900(35.43 ) Chip Conveyor(Side Type) - with Coil Length : 4,566(179.76") 800(31.44") 300(11.8") 2,133(83.83") 2,133(83.83") 560 (22.04") 257(10.12") 1,800(70.74") 1,024(40.25") Spindle Face Chip Conveyor(Back Type) - with Coil 1,120(44") Chip Conveyor(Back Type) - without Coil [976 (38.4")] Front Right side Spindle Power-Torque Diagram VT-450(STD) VT-650(STD) Low Speed High Speed Torque(Nm) 600 400 200 547.8Nm(30min) 461.1Nm(Cont.) 22kW(30min) 18.5kW(Cont.) 30 20.7 20 17.4 10 Power(kW) Torque(Nm) 2000 1000 (M code Electric conversion : 500rpm) Low: 1,578.9 Nm(15min) Low: 1,329.1 Nm(Cont.) 22kW(30min) 18.5kW(Cont.) High: 1,095.6 Nm(30min) High: 922.2 Nm(Cont.) 30 20 16 10 Power(kW) 0 383 500 0 1000 1500 2000 2300 2500 Spindle Speed(rpm) 0 0 0 133 333 500 1000 1150 1500 192 Spindle Speed(rpm)
9 8 10 HWACHEON CATALOG : VT-450 / 650 Tool Interference Diagram Unit : mm(inch) VT-450 STD(8 Stations) ø470(18.50") ø541.4(21.31") ø40(1.57") ø50(1.97") ø328.7(12.94") Max. Cutting Dia. ø460(18.11") Std. Cutting Dia. Ø305(12.01") 1 2 8 3 7 6 4 5 VT-450 MC (10 Stations) 30(1.18") 40 (1.57") 230(9.06") 195(7.68") 390(15.35") 62(2.44") ø587(23.11") 55(2.17") X-Axis Stroke 260(10.24") ø460(18.11") Std. Cutting Dia. ø248.2(9.77") Max. Cutting Dia. ø460(18.11") 1 2 3 4 5 6 89.5(3.52") 10 7 VT-650 STD ø824(32.44 ) ø734(28.9 ) 75(2.95") 167.5(6.59") Max. Swing ø900(35.43 ) Max. Cutting Dia. ø800(31.50 ) Std. Cutting Dia. ø320(12.60 ) 40(1.57 ) 90(3.54 ) 30(1.18 ) 400(15.75 ) 327(12.87 ) X-Axis Stroke 430(16.92 ) 6 10 11 8 12 237(19.33 ) 7 1 9 2 3 5 4 237(19.33 ) 37.5(1.48") 222.5(8.76") 335(13.19") X-Axis Stroke 260(10.24") 242.5(9.55") ø60(63.5 ) ø832(32.76 ) VT-650 MC Max. Swing ø900(35.43") Max. Cutting Dia. ø800(31.49") ø734(28.9 ) 100(3.94 ) Max. ø26(1.02 ) Std.Cutting Dia. ø320(12.6") 1 2 12 3 11 4 10 5 9 6 8 7 Max. ø26(1.02 ) 90(3.54 ) ø60(2.36 ) 40(1.57 ) 237(19.33 ) 237(19.33 ) 30(1.18 ) 400(15.75 ) X-Axis Stroke 430(16.92 ) 327(12.87 )
Tool Interference Diagram & Moving Range 11 Moving Range Unit : mm(inch) VT-450 STD MC X-Axis Stroke 260(10.24") 37.5(1.48") X-Axis Stroke 260(10.24") 34.5(1.36") 30 (1.18") 7(0.28") 33(1.3") 1.5(0.06") Z-Axis Stroke 480(18.9") Max. Cutting Length 460(18.11") 150(5.91") Max. Cutting Dia. Ø460(Ø18.11") Z-Axis Stroke 480(18.9") Max. Cutting Length 460(18.11") Max. Cutting Dia. Ø445(Ø17.52") Z-Axis Stroke 480(18.9") 12 CHUCK 54 (2.13") 54(2.13") 12 CHUCK VT-650 STD MC X-Axis Stroke 430(16.92 ) 9.5(0.37 ) 150(5.9 ) X-Axis Stroke 430(16.92 ) Max. Cutting Length 750(29.53 ) Max. Cutting Dia. ø800(31.50 ) Z-Axis Stroke 790(31.10 ) Z-Axis Stroke 790(31.10 ) 40(1.57 ) 145 (5.7 ) Z-Axis Stroke 790(31.10 ) 130(5.12 ) ø60(2.36 ) Max. Cutting Length 750(29.53 ) Max. Cutting Dia. ø800(31.50 ) Z-Axis Stroke 790(31.10 ) 130(5.12 ) ø60(2.36 ) 145(5.7 ) Z-Axis Stroke 790(31.10 ) 60(2.36 ) 18" CHUCK 49.5(1.94 ) 40(1.57 ) 18" CHUCK 40(1.57 )
12 HWACHEON CATALOG : VT-450 / 650 Product Configuration Each product can be configured to fit your application. VT-450 / VT-650 Ref. Single Twin 1) STD: Standard 2) MC: Turnmill Function C-axis (0.001 ) R-Type L-Type R + L Type STD STD STD MC MC MC Machine Specifications ITEM VT-450 (R, L) VT-450MC VT-650 (R, L) VT-650MC Capacity Swing over Bed mm(inch) Ø610 (24.02 ) Ø900 (35.37 ) Max. Cutting Diameter mm(inch) Ø460 (18.11 ) Ø800(31.44 ) Standard Cutting Diameter mm(inch) Ø305 (12.01 ) Ø248.2(9.77 ) Ø320(12.57") Max. Cutting Length mm(inch) 460 (18.11 ) 750(29.53 ) Chuck Size inch 12 18 Spindle Type of Spindle Nose ASA A2-8 A2-11 Max. Spindle Speed rpm 2,500 1,500 Spindle Bearing Inner Diameter mm(inch) Ø130 (5.12 ) Ø160 (6.30 ) Spindle Motor kw(hp) 22/18.5 (30/25) 22/18.5 (30/25) Turret Number of Tool Station ea 8 10 12 Tool Size mm(inch) 25 Ø50 ( 1 Ø2 ) 32 Ø60 ( 1.25 Ø2.5 ) Turret Indexing Time sec/step 0.15 0.2 Axes Rapid Speed (X/Z) m/min(ipm) 24/20(944.88/787.4) 20/16(787.4/629.9) Max. Stroke (X/Z) mm(inch) 260/480 (10.24 /18.9 ) 430/790 (16.89 /31.04 ) Feed Motor (X/Z) kw(hp) 4.0/4.0(5.5/5.5) 3.0/4.0(4/5.5) Turnmill (Opt.) Spindle Motor kw(hp) - 3.7/2.2 (5/3) - 5.5/3.7(7.5/5) Max. Spindle Speed rpm - 3,000-3,000 Max. Drill/Tap Size mm - Ø16(0.63 ) / M12 - Ø26(1 ) / M20 Min. Index Angle o (deg) - 0.001-0.001 Tank Capacity Lubrication l(gal) 12 (3.17) 12 (3.17) Hydraulic l(gal) 11 (3) 50 (13) Coolant l(gal) 150(40) 195 (52) Power Sources Electrical Power Supply kva 40 40 Dimension Height mm(inch) 2,548 (100.32 ) 3,220 (126.55 ) Floor Space (L W) mm(inch) 1,806 x 2,197(71.1 x 86.5 ) 2,133 x 2,890(83.83 x 113.78 ) Weight kg f(lb f) 7,500 (16,535) 7,550 (16,645) 10,450 (23,038) 10,550 (23,259) NC Controller Fanuc 0i-TD
Machine Specifications 13 Standard and Optional Product Components Standard Accessories Optional Accessories VT-450/650 VT-450 VT-650 Coolant System Turret 8 Station Air Blower Manual Guide i Door Interlock Turret 12 Station Air Curtain (Head, ATC) Mist Collector Foot Switch U-Drill Holder 1ea Air Gun NC Cooler High Pressure Pump 6bar Work Light Auto Door Signal Lamp with 3 Color (R,G,Y) Hydraulic Unit 40kg/cm² 10.4 color LCD Chip Conveyor & Chip Box(Back Type) Spindle Motor Upgrade (α30)37/30kw Leveling Bolt & Plate 12" Hydraulic Chuck & Cylinder Chip Conveyor & Chip Box Spindle Motor Upgrade (α40)45/37kw Lubrication Unit 18" Hydraulic Chuck & Cylinder (Side Type) - with Coil Tool & Work Counter, External / Internal Manual & Parts List Chip Conveyor & Chip Box Tool Life Management Set of Soft Jaws (Back Type) - with Coil Tool Presetter(Automatic) Signal Lamp with 2 Colors(R,G) Chuck Dual Pressure System Tool Presetter(Manual) Tool Kit & Box Chuck Pressure Check Swith Transformer Tooling System Chuck Pressure Compensation Turnmill Funtion Including C-axis(0.001 ) Coolant Gun Turnmill Holder, Axial / Radial Hard Jaw Z.F Gear Box High Pressure Coolant System, 6bar /15bar Z.F Gear Box (α40 only) High Pressure Coolant System 15bar 15 Chuck & Cylinder (Spindle A2-11) L-HTLD(Lathe-Hwacheon Tool Load Detect) 15,21,24 Chuck & Cylinder Linear Scale(X/Z) NC Specifications [Fanuc 0i-TD] ITEM SPECIFICATION STD MC Controlled axis Controlled axis (Cs axis) 2-Axes 2-Axes 3-Axes Simultaneously controlled axes 2-Axes 2-Axes 3-Axes Least input increment 0.001mm, 0.001deg, 0.0001inch S S Least input increment 1/10 0.0001mm, 0.0001deg,0.00001inch O O inch/metric conversion G20, G21 S S Stored stroke check 1,2,3 S S Chamfering on/off S S Backlash compensation S S Operation Automatic & MDI operation S S Program number search S S Sequence number search S S Dry run, single block S S Manual handle feed 1Unit S S Manual handle feed rate x1, x10, x100 S S Interpolation function Positioning G00 S S Linear interpolation G01 S S Circular interpolation G02, G03 S S Dwell (Per seconds) G04 S S Polar coordinate interpolation G12.1 / G13.1 - S Cylindrical interpolation G7.1 - S Threading G32 S S Multiple threading S S Threading retract S S Continuous threading S S Variable lead threading G34 S S Reference position return 1st G28 S S Reference position return check G27 S S 2,3,4th reference position return G30 S S Arbitrary speed threading O O Feed function Rapid traverse override F0, F25, F50, F100 S S Feed per minute (mm/min) G98 S S Feed per revolution (mm/rev) G99 S S Rapid traverse bell-shaped acceleration/deceleration S S Feedrate override 0-150 % S S Jog feed override 0-1,260 mm/min S S Program input Tape code EIA RS244 / ISO840 S S Optional block skip 1ea S S Program number O4 - Digits S S Sequence number N5 - Digits S S Decimal point programming S S Coordinate system setting G50 S S Coordinate system shift S S Workpiece coordinate system G54 - G59 S S Workpiece coordinate system preset G92.1 S S Direct drawing dimension programming S S G code system A S S - : Not available S : Standard O : Option ITEM SPECIFICATION STD MC Program input Programmable data input G10 S S Sub program call 10 folds nested S S Custom macro B S S Addition of custom macro -common variables #100-#199, #500-#999 S S Canned cycles S S Multiple repetitive cycle S S Multiple repetitive cycle ll S S Canned cycles for drilling S S Small-hole peck drilling cycle S S Manual Guide i O O Spindle speed function Constant surface speed control G96 / G97 S S Spindle override 50-120% S S Spindle orientation S S Rigid tapping O S Spindle synchronous control - - Tool function / compensation Tool function T4-digits S S Tool offset pairs 64pairs S S Tool nose radius compensation S S Tool geometry/wear compensation S S Tool life management O O Automatic tool offset Tool presetter option is required O O Direct input tool offset value measured B Tool presetter option is required O O Editing operation Part program storage length 1,280m(512kB) S S Number of register able programs 400ea S S Background editing S S Extended part program editing S S Play back S S Operation/Display Clock function S S Self-diagnosis function S S Alarm history display S S Help function S S Run hour and parts count display S S Graphic function S S Multi-language display English, German, French, Italian, Chinese, Spanish, Korean, Portuguese, Polish, Hungarian, Swedish,Russia Data input/output Reader/Puncher interface CH1 RS232C S S Reader/Puncher interface CH2 RS232C S S Ethernet interface Embeded Ethernet S S Memory card interface S S USB card interface S S Others Display unit 10.4 Color LCD S S S S
Hwacheon Global Network Hwacheon Headquarter Hwacheon America Hwacheon Europe Hwacheon Asia Please call us for product inquiries. www.hwacheon.com The product design and specifications may change without prior notice. Read the operation manual carefully and thoroughly before operating the product, and always follow the safety instructions and warnings labels attached on the surfaces of the machines. HEAD OFFICE HWACHEON MACHINE TOOL CO., LTD 976-1, JANGDEOK-DONG GWANGSAN-GU, GWANGJU, KOREA TEL: +82-62-951-5111 FAX: +82-62-951-0086 SEOUL OFFICE 1022-7, BANGBAE-DONG, SEOCHO, SEOUL, KOREA TEL: +82-2-523-7766 FAX: +82-2-523-2867 USA HWACHEON MACHINERY AMERICA, INC. 555 BOND STREET, LINCOLNSHIRE, ILLINOIS, 60069, USA TEL: +1-847-573-0100 FAX: +1-847-573-9900 SINGAPORE HWACHEON ASIA PACIFIC PTE. LTD. 21 BUKIT BATOK CRESCENT, #08-79 WCEGA TOWER SINGAPORE 658065 TEL: +65-6515-4357 FAX: +65-6515-4358 GERMANY HWACHEON MACHINERY EUROPE GMBH JOSEF-BAUMANN STR. 25, 44805, BOCHUM, GERMANY TEL: +49-2349-128160 FAX: +49-2349-1281660 HC-T023-R2.5-201408