Overview Bus system Profibus Ethernet (CAT 5e / GigE / PoE) ASinterface Part. No. CF898.001 CF898.045 CF898.080 & CF898.081 Example drawing 34 mm Core design: Conductor: Core insulation: Core identification: Shield design: (Not relevant for 080 & 081) Material: Shield coverage (optical): Wire strand consisting of bare or (following DIN EN 60228). According to bus specification. According to bus specification. Braid made of combined with an aluminium clad plastic foil. approx. 60 % (Braid) 100 % (Foil) Jacket design: Outer jacket: Low-adhesion mixture on the basis of igupur adapted to suit the requirements in e-chains. oil-resistant (following DIN EN 50363-10-2) flame-retardant (following IEC 60332-1-2, CEI 20-35, VW-1 & FT-1 (001 & 045)) FT-2 (080 & 081)) silicon-free (following PV 3.10.7 - status 1992) lead-free (following 2011/65/EU (RoHS-II)) UV-resistance: Medium Colour outer jacket: Red lilac (similar to RAL 4001) or Rape yellow (similar RAL 1021) (only CF898.080) or Jet black (similar RAL 9005) (only CF898.081) Cable marking (Black or White): 00000 m * igus chainflex M CF898.--- --- --- CE --- --- conform General mechanical values: (for individual details see technical table) RoHS-II conform +++ chainflex cable works +++ * Length printing: Not calibrated. Only intended as an orientation aid. / : Cable identification according to part no. (see technical table. Ex.: CF898.001: chainflex CF898.001 (2x0,25)C CE : Printing of the data (see related chapter). : Printing: DESINA (only if DESINA-standard fulfilled). : Printing according to bus specification (inclusive wave resistance). Ex.: CF898.001: DESINA 150 OHM Profibus conform Double strokes 1 million Temperature Travel distance Min. bending radius for e-chain use [Factor multiplied by outer diameter (d)] (from/to) [ C] (TD) (Ex.: CF898.001 at 20 C: 15,0 x 8,0 mm Min. bending radius 120,0 mm) -20 / -10 17,5 (17,5 x h ) 6 m -10 / +70 (unsupported) 15,0 (15,0 x h ) +70 / +80 17,5 (17,5 x h ) : Minimum guarantee lifetime of the cable under the specified conditions. The installation of the cable is recommended within the middle temperature range. Temperature range -40 C -20 C -10 C +70 C +80 C Min. bending radius for fixed installation 15,0 x d (17,5 x h ) 12,5 x d (15,0 x h ) 10,0 x d (12,5 x h ) 12,5 x d (15,0 x h ) Torsion (at 1 m cable length) --- ±0 ±15 (±0 ) ±0 : Applicable values for.080 &.081 according to the height (h). Please refer regarding the availability of the items also the information in the latest chainflex catalogue. Page 1/5
General electrical values: (for individual details see technical table and chapter belonging to the cable) Nominal voltage: 50 V Test voltage: 500 V (Core / Core) & 500 V (Core / Shield) following DIN EN 50289-1-3 Guidelines: CE, DESINA (not.080 &.081), NFPA (following 79-2012 chapter 12.9), EAC & TR (CTP) Dynamic values: Max. speed for e-chain use:** Gliding (up to 6 m): v = 3 m / s Max. acceleration for e-chain use:** a = 20 m / s 2 ** These values are based on specific applications or tests. They do not represent the limit of what is technically feasible. Typical lab test setup for this cable group: Test bending radius R: approx. 100 mm Test travel S: approx. 1-15 m Test period: min. 1,0-1,5 million double strokes Test speed: approx. 0,5-2 m / s Test acceleration: approx. 0,5-1,5 m / s 2 e-chain - Bus cable for flexible load requirements: for 1 million movements (double strokes) in e-chains for areas of application with oil influence especially for unsupported travel distances CE, RoHS-II, DESINA (only.080 &.081),, NFPA, EAC & TR (CTP) Typical application areas: Indoor and outdoor applications without direct sun radiation. Machining units/machine tools, low-temperature applications. Please refer regarding the availability of the items also the information in the latest chainflex catalogue. Page 2/5
Technical tables: Mechanical values: Part no. Number of cores & nominal cross section [mm²] External diameter (d)*** [max. mm] Copper index [kg / km] Weight [kg / km] Profibus CF898.001 (2x0,25)C 8,0 19 58 Ethernet (CAT5e / GigE / PoE) CF898.045 (4x(2x0,15))C 7,5 27 64 ASinterface CF898.080 2x1,5 see drawing 32 64 CF898.081 2x1,5 see drawing 32 64 *** External diameters are maximum values and may tend toward lower tolerance limits. Nominal cross section [mm²] Conductor resistance [approx. Ω / km] at 20 C Max. current rating [A] at 30 C (following) DIN EN 50289-1-2 DIN VDE 0891-1 0,15 149 2,5 0,25 78 5 1,5 14,6 21 The max. current rating depends on factors such as the individual environmental conditions and the type of installation. Please refer regarding the availability of the items also the information in the latest chainflex catalogue. Page 3/5
CF898.001 (Profibus) extruded igupur mixture Conductor: Wire strand consisting of bare copper wires Overall shield: Braid made of Filler: Plastic yarn Banding: Plastic foil Shield foil: Aluminium clad plastic foil Characteristic wave resistance: 150 ± 15 Ω ( 1 MHz) following DIN EN 50289-1-11 Certifications: : (E310776: Style 10493 & 20236, 300 V / 80 C) CF898.001 2x0,25 red, green CF898.045 (Ethernet (CAT5e / GigE / PoE)) extruded igupur mixture Overall shield: Braid made of 34 mm Conductor: Wire strand consisting of bare copper wires Characteristic wave resistance: 100 ± 15 Ω (at 1 MHz to 250 MHz) following DIN EN 50289-1-11 Certifications: : (E310776: Style 10493 & 20236, 300 V / 80 C) CF898.045 4x(2x0,15) whiteblue/blue, whiteorange/orange, whitegreen/green, whitebrown/brown (According to EIA/TIA 568) Banding: Plastic foil Shield foil: Aluminium clad plastic foil (Back to overview or technical table) Please refer regarding the availability of the items also the information in the latest chainflex catalogue. Page 4/5
CF898.080 & CF898.081 (ASinterface) extruded PUR mixture Conductor: Wire strand consisting of 2 2 Elektrische Werte: All dimensions are in mm unless otherwise stated. These can due technical reasons tolerate up to ± 0,2 mm or ± 1 Nominal voltage: 50 V Test voltage: 1,5 kv (Core / Core) following DIN EN 50289-1-3 Certifications: : (E310776: Style 10493 & 20549, 300 V / 80 C) Operating capacity: CF898.080: approx. 80 pf / m CF898.081: approx. 80 pf / m (at 800 Hz) following DIN EN 50289-1-5 Characteristic wave resistance: 100 ± 30 Ω (at 167 khz) following DIN EN 50289-1-11 CF898.080 (Communications & Power Supply) 2x1,5 blue, brown CF898.081 (Auxiliary power supply) 2x1,5 blue, brown (Back to overview or technical table) Please refer regarding the availability of the items also the information in the latest chainflex catalogue. Page 5/5