AMP NETCONNECT 19 NETWORK AND SERVER RACK SYSTEM. Product development was driven by the need to solve troubles of cabinet rack usage as well as to provide a cabinet that will efficient networking, reliability, and security to meet the needs of any discerning users of cabinet rack. CABINET FRAME Made from high quality metal white sheet durable and rustproof material, black paint color, Adjustable depth access allows easy cable management from front with guide slot for easy install and setup, removable both-side doors enables easy equipment installation and stable joint with baying kit. Four pole are a square hole rack is very easy to use and boltless able to move front and back side to adjust deep to all server type required, include an indicator Unit High number print on the front and rear of the rack to help identify a machine needing attention DOOR OPTIONS Acrylic Door suitable for open area or without air conditioned system as acrylic door will protects your equipments from dust. Flat Perforate Door suitable for Data Center or in air conditioned system as perforate door for ventilation and guaranty cool air to flow though inside easier and cool down all system inside cabinet easy setup and compatible with all panel enclosure. Curve Perforate Door is specifically designed for Data Center or in air conditioned environments system as perforate door for ventilation and guaranty cool air to flow though inside easier and cool down all system inside cabinet conditioned that will improves space and airflow active cooling can be focused on the areas where high heat dissipation is require and not be wasted on cooling traditional passive cable easy setup and compatible with all panel enclosure. Curve Perforate is design for support angle and Hi-D angle patch panel and enclosure to prevent patching cable in front of rack to bend by the front door ACCESSORY Accommodate general accessories as well as its own custom set of options. Options include Fixed Shelf, Heavy Duty Shelf, Slide Shelf, Ventilation Shelf, Ventilation Fan Set, and Power Distribution Unit. PRODUCT STNADARD AND QUALITY AMP NETCONNECT RACK meets quality standards which ANSI/EIA-310D-1992 (Rev.EIA-310C), IEC 60297-1 IEC 60297-2, BS 5954: Part 2, DIN 41494 MANUAFACTORY STANDARD ISO 9001:2000 ISO 14001 PAGE - 2 -
Front Side Back Side - Modular knock-down, full assembled and easy to assembly on site. - Material :cold rolled steel, white sheet comply to RoHS standard, frame made of 2mm steel durable and rustproof. Front, back door and side cover is 1.2mm thickness, able to adjust depth for all 4 poles. - Front door, Acrylic 5mm clear visible inside protect from dust with handle lock for security able to setup to open from left or right side. - Back door, steel plate double side, 2 small half door for space saving with turn lock key for security. - Side cover, metal plate able to move with latch lock and key - Stands, four stand metal, easy to adjust. - Casters, four Nylon caster, on 3mm base stand, able to turn 360 degree easy to move. - Cable routing from top and bottom, top roof hole able to install ventilation fan set 2 6 fans and able to close with blank plate if not use. - Static loading 1000 Kg. - Ground system, all part are bonding together with grounding cable kits. - Include cable tray left and right for 800 Series - Accessory provides M6 bolts, and cage nuts. - Color, Black Powder Epoxy, Electro Static painting. - Electro Galvanized Material available on request Product Selection 600 Series (WXD) 800 Series (WXD) 600X600 600X800 600X1100 800X800 800X1100 Standard Rack 15U, ACD 15 1-1427502-1 1-1427503-1 1-1427504-1 1-1427505-1 1-1427506-1 Standard Rack 27U, ACD 27 2-1427502-1 2-1427503-1 2-1427504-1 2-1427505-1 2-1427506-1 Standard Rack 36U, ACD 36 3-1427502-1 3-1427503-1 3-1427504-1 3-1427505-1 3-1427506-1 Standard Rack 42U, ACD 42 4-1427502-1 4-1427503-1 4-1427504-1 4-1427505-1 4-1427506-1 Standard Rack 45U, ACD 45 5-1427502-1 5-1427503-1 5-1427504-1 5-1427505-1 5-1427506-1 PAGE - 3 -
Product Specification 600 Series (WXD) mm 600X600 600X800 600X1100 W D H W D H W D H 15 600 600 821 600 800 821 600 1100 821 27 600 600 1354 600 800 1354 600 1100 1354 36 600 600 1754 600 800 1754 600 1100 1754 42 600 600 2021 600 800 2021 600 1100 2021 45 600 600 2155 600 800 2155 600 1100 2155 PAGE - 4 -
Product Specification 800 Series (WXD) mm 800X800 800X1100 W D H W D H 15 800 800 821 800 1100 821 27 800 800 1354 800 1100 1354 36 800 800 1754 800 1100 1754 42 800 800 2021 800 1100 2021 45 800 800 2155 800 1100 2155 PAGE - 5 -
Front Side Back Side - Modular knock-down, full assembled and easy to assembly on site. - Material :cold rolled steel, white sheet comply to RoHS standard, frame made of 2mm steel durable and rustproof. Front, back door and side cover is 1.2mm thickness able to adjust depth for all 4 poles. - Front door, 80% Flat Perforate area, steel 4.20mm diameter, 4.76mm pitch, with handle lock for security able to setup to open from left or right side. - Back door, Flat Perforate steel, 4.20mm diameter, 4.76mm pitch, double side, 2 small half door for space saving with turn lock key for security. - Side cover, metal plate able to move with latch lock and key - Stands, four stand metal, easy to adjust. - Casters, four Nylon caster, on 3mm base stand, able to turn 360 degree easy to move. - Cable routing from top and bottom, top roof hole able to install ventilation fan set 2 6 fans and able to close with blank plate if not use. - Static loading 1000 Kg. - Ground system, all part are bonding together with grounding cable kits. - Include cable tray left and right for 800 Series - Accessory provides M6 bolts, and cage nuts. - Color, Black, Black Powder Epoxy, Electro Static painting. - Electro Galvanized Material available on request Product Selection 600 Series (WXD) 800 Series (WXD) 600X600 600X800 600X1100 800X600 800X800 800X1100 Standard Rack 15U, FPD 15 1-1427502-2 1-1427503-2 1-1427504-2 TBA 1-1427505-2 1-1427506-2 Standard Rack 27U, FPD 27 2-1427502-2 2-1427503-2 2-1427504-2 TBA 2-1427505-2 2-1427506-2 Standard Rack 36U, FPD 36 3-1427502-2 3-1427503-2 3-1427504-2 TBA 3-1427505-2 3-1427506-2 Standard Rack 42U, FPD 42 4-1427502-2 4-1427503-2 4-1427504-2 TBA 4-1427505-2 4-1427506-2 Standard Rack 45U, FPD 45 5-1427502-2 5-1427503-2 5-1427504-2 TBA 5-1427505-2 5-1427506-2 PAGE - 6 -
Product Specification 600 Series (WXD) mm 600X600 600X800 600X1100 W D H W D H W D H 15 600 600 821 600 800 821 600 1100 821 27 600 600 1354 600 800 1354 600 1100 1354 36 600 600 1754 600 800 1754 600 1100 1754 42 600 600 2021 600 800 2021 600 1100 2021 45 600 600 2155 600 800 2155 600 1100 2155 PAGE - 7 -
Product Specification 800 Series (WXD) mm 800X800 800X1100 W D H W D H 15 800 800 821 800 1100 821 27 800 800 1354 800 1100 1354 36 800 800 1754 800 1100 1754 42 800 800 2021 800 1100 2021 45 800 800 2155 800 1100 2155 PAGE - 8 -
Front Side Back Side - Modular knock-down, full assembled and easy to assembly on site. - Material :cold rolled steel, white sheet comply to RoHS standard, frame made of 2mm steel durable and rustproof. Front, back door and side cover is 1.2mm thickness able to adjust depth for all 4 poles. - Front door, 80% Curve Perforate area, steel 4.20mm diameter, 4.76mm pitch, with handle lock for security able to setup to open from left or right side. - Back door, Flat Perforate steel, 4.20mm diameter, 4.76mm pitch, double side, 2 small half door for space saving with turn lock key for security. - Side cover, metal plate able to move with latch lock and key - Stands, four stand metal, easy to adjust. - Casters, four Nylon caster, on 3mm base stand, able to turn 360 degree easy to move. - Cable routing from top and bottom, top roof hole able to install ventilation fan set 2 6 fans and able to close with blank plate if not use. - Static loading 1000 Kg. - Ground system, all part are bonding together with grounding cable kits. - Include cable tray left and right for 800 Series - Accessory provides M6 bolts, and cage nuts. - Color, Black, Black Powder Epoxy, Electro Static painting. - Electro Galvanized Material available on request Product Selection 600 Series (WXD) 600X600 600X800 600X1100 600X1200 Standard Rack 15U, CPD 15 1-1427502-3 1-1427503-3 1-1427504-3 1-1427524-3 Standard Rack 27U, CPD 27 2-1427502-3 2-1427503-3 2-1427504-3 2-1427524-3 Standard Rack 36U, CPD 36 3-1427502-3 3-1427503-3 3-1427504-3 3-1427524-3 Standard Rack 42U, CPD 42 4-1427502-3 4-1427503-3 4-1427504-3 4-1427524-3 Standard Rack 45U, CPD 45 5-1427502-3 5-1427503-3 5-1427504-3 5-1427524-3 800 Series (WXD) 800X600 800X800 800X1100 800X1200 Standard Rack 15U, CPD 15-1-1427505-3 1-1427506-3 1-1427526-3 Standard Rack 27U, CPD 27-2-1427505-3 2-1427506-3 2-1427526-3 Standard Rack 36U, CPD 36-3-1427505-3 3-1427506-3 3-1427526-3 Standard Rack 42U, CPD 42-4-1427505-3 4-1427506-3 4-1427526-3 Standard Rack 45U, CPD 45-5-1427505-3 5-1427506-3 5-1427526-3 PAGE - 9 -
Product Specification 600 Series (WXD) mm 600X600 600X800 600X1100 600X1200 W D H W D H W D H W D H 15 600 680 821 600 880 821 600 1180 821 600 1280 821 27 600 680 1354 600 880 1354 600 1180 1354 600 1280 1354 36 600 680 1754 600 880 1754 600 1180 1754 600 1280 1754 42 600 680 2021 600 880 2021 600 1180 2021 600 1280 2021 45 600 680 2178 600 880 2178 600 1180 2178 600 1280 2178 PAGE - 10 -
Product Specification 600 Series (WXD) mm 600X600 600X800 600X1100 W D H W D H W D H 15 800 880 821 800 1180 821 800 1280 821 27 800 880 1354 800 1180 1354 800 1280 1354 36 800 880 1754 800 1180 1754 800 1280 1754 42 800 880 2021 800 1180 2021 800 1280 2021 45 800 880 2178 800 1180 2178 800 1280 2178 PAGE - 11 -
Front Side Back Side - Modular knock-down, full assembled and easy to assembly on site. - Split into 2 front and back doors (22UX2) or 3 front and back doors (14U X3) for security and separate user in the same cabinet - Separate 1-3 cable duct for separate area for more security for physical protection. - Material: cold rolled steel, white sheet comply to RoHS standard, frame made of 2mm steel durable and rustproof. Front, back door and side cover is 1.2mm thickness able to adjust depth for all 4 poles. - Front door, 80% Curve Perforate area, steel 4.20mm diameter, 4.76mm pitch, with handle lock for security able to setup to open from left or right side. - Back door, Flat Perforate steel, 4.20mm diameter, 4.76mm pitch, double side, 2 small half door for space saving with turn lock key for security. - Side cover, metal plate able to move with latch lock and key - Stands, four stand metal, easy to adjust. - Casters, four Nylon casters, on 3mm base stand, able to turn 360 degree easy to move. - Cable routing from top and bottom, top roof hole able to install ventilation fan set 2 6 fans and able to close with blank plate if not use. - Static loading 1000 Kg. - Grounding system, all part is bonding together with grounding cable kits. - Accessory provides M6 bolts, and cage nuts. - Color, Black, Black Powder Epoxy, Electro Static painting. - Electro Galvanized Material available on request Product Selection 600 Series (WXD) 600X1100 600X1200 Co-Location Rack 2 Doors, CPD 45 TBA 5-1427524-4 Co-Location Rack 3 Doors, CPD 45 TBA 5-1427524-5 PAGE - 12 -
Product Specification 600 Series (WXD) mm 600X1100 600X1200 W D H W D H 45 600 1280 2175 PAGE - 13 -
- Modular knock-down, full assembled and easy to assembly on site. - 3 section designed back for wall mounting, middle for equipment mounting and able to swing open for easy installation and maintenance with master key lock able to use for both front and side key lock, third section acrylic door. - Material: cold rolled steel, white sheet comply to RoHS standard, frame made of 2mm steel durable and rustproof Front door is 1.2mm thickness able to adjust depth for all 2 poles. - Front door, Metal Frame with Acrylic 5mm clear visible inside protect from dust with collapse key lock for security able to setup to open from left or right side. - Back Side able to install on the wall by 4 screw with 2 layer steel holder for heavy duty support - Side cover, metal plate with perforate at bottom for better air flow. - Cable routing from top bottom, left and right side, top roof hole able to install ventilation fan set 2 3 fans and able to close with blank plate if not use. - Ground system, all part are bonding together with grounding cable kits. - Accessory provides M6 bolts, and cage nuts and Screw for Wall Mounting Kit. - Color, Black, Black Powder Epoxy, Electro Static painting. - Electro Galvanized Material available on request Product Selection 500 Series (WXD) 650 Series (WXD) 600X500 600X650 Wall Rack 6U, ACD 6 1427517-1 1427520-1 Wall Rack 9U, ACD 9 1427518-1 1427521-1 Wall Rack 12U, ACD 12 1427519-1 1427522-1 PAGE - 14 -
- Modular knock-down, full assembled and easy to assembly on site. - 3 section designed back for wall mounting, middle for equipment mounting and able to swing open for easy installation and maintenance with master key lock able to use for both front and side key lock, third section curve perforate door. - Material: cold rolled steel, white sheet comply to RoHS standard, frame made of 2mm steel durable and rustproof. Front door is 1.2mm thickness able to adjust depth for all 2 poles. - Front door, Metal Curve Perforate, 4.20mm diameter, 4.76mm pitch with collapse key lock for security able to setup to open from left or right side. - Back Side able to install on the wall by 4 screw with 2 layer steel holder for heavy duty support - Side cover, metal plate with perforate at bottom for better air flow. - Cable routing from top bottom, left and right side, top roof hole able to install ventilation fan set 2 3 fans and able to close with blank plate if not use. - Ground system, all part are bonding together with grounding cable kits. - Accessory provides M6 bolts, and cage nuts and Screw for Wall Mounting Kit. - Color, Black, Black Powder Epoxy, Electro Static painting. - Electro Galvanized Material available on request Product Selection 500 Series (WXD) 650 Series (WXD) 600X500 600X650 Wall Rack 6U, CPD 6 1427517-2 1427520-2 Wall Rack 9U, CPD 9 1427518-2 1427521-2 Wall Rack 12U, CPD 12 1427519-2 1427522-2 PAGE - 15 -
Product Specification Wall Rack (WXDXH) mm 500 Series 650 Series W D H W D H 6 600 500 320 600 650 320 9 600 500 453 600 650 453 12 600 500 586 600 650 586 PAGE - 16 -
AC POWER DISTRIBUTION UNIT STANDARD Power Distribution Unit (PDU) 220V AC 50Hz, 6 or 12 Outlets with Ground Cord (L,N,G) Material: cold rolled steel, white sheet, 1.5mm comply to RoHS standard, Electro Galvanized Material available on request Overload Circuit breaker protection and indicator status Surge protection current, 10KA, Champing voltage 775V is option 3 m. power cord plug, 14AWG, (2.5mm insulation) Power cord is UL E150631, Outlet is UL E147650 standard compliant Power Socket IEC 60320, 3 Pin Standard, 10A per Socket Other size, please call for information Part Number AC PDU,6 Outlet, 15A, Standard 1427507-1 AC PDU,12 Outlet, 15A, Standard 1427507-2 AC POWER DISTRIBUTION UNIT HIGH POWER Power Distribution Unit (PDU) 220V AC 50Hz, 6,12,16 Outlets with Ground Cord (L,N,G) Material: cold rolled steel, white sheet, 1.5mm comply to RoHS standard, Electro Galvanized Material available on request Overload Circuit breaker protection and indicator status Surge protection current, 10KA, Champing voltage 775V is option 3 m. power cord plug, 14AWG, (2.5mm insulation) Power cord is UL E150631, Outlet is UL E147650 standard compliant Power Socket IEC 60320, 3 Pin Standard, 10A per Socket Power Plug EN 60309-2, 3 Pin Standard With Breaker or Without breaker (use fuse) Part Number AC PDU,6 Outlet, 16A, Power Plug 1-1427507-1 AC PDU,12 Outlet, 32A, Power Plug 1-1427507-2 AC PDU,16 Outlet, 16A, Power Plug (Fuse 10A/Outlet) * 3-1427507-3 AC PDU,16 Outlet, 32A, Power Plug (Fuse 10A/Outlet) * 4-1427507-3 * with out breaker switch PAGE - 17 -
FAN SET UNIT Trays available with either two or three 4 inch fans are typically located in the top of the cabinet for versatility Material: cold rolled steel plate, white sheet, 1.5mm comply to RoHS standard, Electro Galvanized Material available on request Fan s housing Aluminum, with sieve, steel chromium plate, UL & CSA & TUV Standard compliant Reliable AC Motor Construction, with impedance protection Lubricated Sintered sleeve bushing system Air flow 3.0 cubic meter / min 1.5 m. power cord plug, other length available on request Rated at 110/115V or 220/240VAC, 50-60 Hz Electro Galvanized Material available on request Part Number Ventilating Fan Set 2X4" Dia 1427508-1 Ventilating Fan Set 3X4" Dia 1427508-2 VENTED SHELVE 400 MM DEEP Supports equipment up to 40 cm. deep with 1U height Compatible with 19" Racks Material: cold rolled steel plate, white sheet, 1.5mm comply to RoHS standard, Electro Galvanized Material available on request Up to 20 kg. load capacity, able to take the weight of equipments installation such as Modem, Power Adapter Made from Black Solid Steel Electro Galvanized Material available on request Part Number Vented Shelve 400 mm Depth 1427509-1 SLIDE SHELF These Slide Shelves are ideal for equipments and all part need to often move in and out Compatible with 19" Racks, 1U height, mounting hardware included Material: cold rolled steel plate, white sheet, 1.5mm comply to RoHS standard, Electro Galvanized Material available on request 40 Kg capacity load standard, 80Kg available on request Compatible with 600, 800 and 1100 deep cabinets Electro Galvanized Material available on request Part Number Slide Shelf, for 600 Series, (450 mm depth) 272363-1 Slide Shelf, for 800 Series, (600 mm depth) 272363-2 Slide Shelf, for 1100 Series, (800 mm depth) 272363-3 PAGE - 18 -
FIXED SHELF&HEAVY DUTY SHELF These Fixed and Heavy Duty Shelves are ideal for heavy load equipments Compatible with 19" Racks, 1U height, mounting hardware included Material: cold rolled steel plate, white sheet, comply to RoHS standard, Electro Galvanized Material available on request 80 Kg capacity for Fixed Shelf series, 1.5mm thickness 300 Kg capacity for Heavy Duty Shelf series, 2mm thickness Compatible with 600, 800 and 1100 deep cabinets Electro Galvanized Material available on request Part Number Fixed Shelf, for 600 Series, (450 mm depth) 1427510-1 Heavy Duty Shelf, for 600 Series, (450 mm depth) 1427510-2 Fixed Shelf, for 800 Series, (600 mm depth) 1427510-3 Heavy Duty Shelf, for 800 Series, (600 mm depth) 1427510-4 Fixed Shelf, for 1100 Series, (800 mm depth) 1427510-5 Heavy Duty Shelf, for 1100 Series, (800 mm depth) 1427510-6 Fixed Shelf, for 1200 Series, (1150 mm depth) 1427510-7 Heavy Duty Shelf, for 1200 Series, (1150 mm depth) 1427510-8 Hi-D ANGLE CABLE MANAGEMENT Rack density increased by up to 50% Compatible with 19 Standard Rack 80 cm width Professional cable routing, finger slot for fix the cable Reliable and safe maintenance Lower operational cost fast MACs Bend radius control for copper and fiber required by ISO/IEC 11801 and TIA/EIA 568B Standard Electro Galvanized Material available on request Part Number Angle Cable Management Kit, Left & Right, 2 1427515-1 Angle Cable Management Kit, Left & Right, 6 1427516-1 PAGE - 19 -
Blank Panel Blank Panel for 19 Standard Rack 1.5mm Steel Black Color Available in 1U, 2U, 3U, 4U and 5U Height Electro Galvanized Material available on request Part Number Blank Panel, 1 1427536-1 Blank Panel, 2 1427536-2 Blank Panel, 3 1427536-3 Blank Panel, 4 1427536-4 Blank Panel, 5 1427536-5 Airbrush Damper Kits Airbrush Damper kit for prevent leak air floor Snap In plate easy to add move same as Fan Kit footprint Fit to top roof and bottom of rack 19X5 cm brush size, 4 brushes per plate on area 2 aperture per plate with 380 cm 2 per plate Part Number Airbrush Damper Kit 1427537-1 VELCRO CABLE TIES For 8-inch and 12-inch ties, an order quantity of one equals one roll of ten ties, easier and flexible to managed cable in cabinet rack and cable tray Part Number 1 X8 VELCRO CABLE TIES, BLACK (10 piece per roll) 1375253-2 1 X12 VELCRO CABLE TIES, BLACK (10 piece per roll) 1375254-2 For more information; Tyco Electronics (Thailand) Limited Website: http://www.ampnetconnect.com/thailand Email: ampth.connect@tycoelectronics.com Tel. 02-834-6233, 02-834-6224, Call Center: 085-224-5000 Catalog No 273007, Rev F, JUL 2012 PAGE - 20 -