Kawasaki Versys Kawasaki KLR650 special parts www.touratech.de/kawasakiversys
www.touratech.de/kawasakiklr650
670 Crossbar For some time now, many enduro bikes have not been equipped with a crossbar. Many streetfighters with high handlebars don t have one, although it is ideal for mounting some interesting accessories: Roadbook holders, GPS receivers and many more To fit all these accessories you will need to mount our crossbar.the original handlebars are retained. Simply screw the brace to your handlebars. Now you can mount your equipment. Perfect solution if you don t need a crossbar all the time. 040-0603 290 mm Versys 1000 040-0604 250 mm Versys 1000/650 040-0605 275 mm Versys 1000 Navigation system bracket for Kawasaki Versys 1000/650 fork brace For the simple and safe attachment of your navigation system and to keep it close to the instruments. Easy to attach to the handlebar clamp, you can fit almost any navigation system in this holder. And your navigation system is always in your sight. 612-0040 Versys 1000 408-5410 Versys 650 GPS mounting adapter above instruments for Kawasaki Versys 650 from 2012 Successful rally racers show us how it s done: they fit their instruments in the central field of vision. And what works for rallies is also a perfect solution for everyday use! Our mounting adapter above instruments lets you keep your GPS device or road book firmly in view. No more looking down or distractions to the side - your eyes are always pointed at the road. 408-5415
Kaoko Cruise Control, mechanical cruise control The original by the South African inventor! The Kaoko Cruise control replaces the original handlebar end weight. The anti-slip knurled screw secures the accelerator in position. This significantly reduces the strain on the right hand during long journeys. Thanks to the continuous adjustment, the accelerator can also be fixed to decelerate very gently - leaving you enough time to take your hand off the handlebar for a moment without immediately losing throttle. Despite that, the motorbike decelerates in a gentle and controlled way. This item is illegal in road traffic in Germany and could be dangerous if used incorrectly. We are unable to accept any responsibility for it. Used at the owner s/rider s own risk. 330-0025 Versys 1000 330-0026 Versys 650 Fairing, handlebar riser Kawasaki Versys 671 Crash bar for Kawasaki Versys 650 Use these crashbars and even major falls will no longer be a horrifying experience. The plastic-coated steel tube is integrated perfectly in the design of the motorbike, and will cope even with the toughest conditions. The slender design also offers lots of advantages when riding off-road. All attachment materials included. 408-5155 Touratech Hand Protectors GD for Kawasaki Versys 1000/650 These hand protectors are made of virtually indestructible plastic; they are modern in design, offer a high level of protection, and can easily be fitted to the Kawasaki using the fitting sets (included). The hand protector can be combined with various spoilers and then offers optimum protection against wind and weather. A very strong, sturdy construction which has proved itself time and again in many rallies and on other motor cycles. 408-5650 black 408-5651 yellow 408-5652 blue 408-5653 red 408-5654 white
672 Radiator guard, black anodized, for Kawasaki Versys 1000/650 from 2012 Protects the radiator from stones being thrown up from the ground - Laser-cut aluminium, black anodized - Does not affect the radiator function - Screwed on to existing fixing points 408-5015 Versys 650 407-5015 Versys 1000 Oil filler cap with special tool, for Kawasaki Versys 650 (from 2012)/ Versys Touratech s quality oil filler cap for the Kawasaki Versys 650/1000 is milled from aluminium and replaces the plastic oil filler cap. The Touratech oil cap needs a special tool (supplied) to open it. You can also use the tool as a key fob and bottle opener. The tool - which comes with the cap - secures the filler cap against unauthorised access, and means the cap can be opened without fiddling or burning your fingers. Available in gold, red, black and titanium colours. 408-5230 gold anodised 408-5231 red anodised 408-5232 black anodised 408-5233 titanium anodised Side stand base extension for Kawasaki Versys 1000/650 It s a familiar problem that has tested the temper of many motorcyclists. Parking your bike on soft ground can be a real problem! Usually you can t find a wooden board or something similar to stand the bike on when you need it. Touratech has the solution: the side stand base extension more than doubles the area of the supporting surface, so you won t find yourself straining to lift the fully laden machine. A mix of stainless steel and black anodised aluminium components ensure the base extension looks good and provide full stability. 408-5275 Versys 650 407-5275 Versys 1000
*Works* long-distance foot pegs for Kawasaki Versys 650/1000 Touratech WORKS stainless steel foot pegs. The best that Touratech has to offer for your boots. Specially developed to meet the specifications of the Touratech works racing team. 408-5315 Handlebar, lighting, tank Kawasaki Versys 673 Pivot Pegz - *Mark3* for Kawasaki Versys 650 from 2006 Thanks to a spring joint, these foot pegs follow the forward and backward movements of the foot to an angle of 20 degrees. This protects the boot, and gives the Rider a better position on the bike - even in extreme situations. It also minimises the load on the rider, since the boot is almost always positioned on the full surface of the peg and not - as with the conventional peg - on the edge. This is particularly Tiring, especially off-road. 040-5512 Chain guard, black anodised, for Kawasaki Versys 650 Touratech offers a high-quality, robust alternative to the original plastic chain guard. Made from riveted stainless steel and black anodised aluminium, our guard is much stronger but still lightweight. It s a real eye-catcher! The chain guard is simple and quick to fit as it attaches to the existing mounting points. 408-5045 ABS sensor protection, rear, for Kawasaki Versys 650 from 2012 By nature of its design, a motorbike has some important components that are at risk of damage. This is the case with the ABS sensor on the Kawasaki Versys 650. Grit or small stones can easily destroy these important sensors or stop them working properly. Our ABS sensor protection kit protects the sensitive front sensor from any flying stone chips or other nasties. 408-5010
674 Tank Bag Touring Kawasaki Versys 1000/650 There s more to our Touring tank bag than just good looks! Designed to match the Kawasaki perfectly, it guarantees full steering lock without the embarrassment of accidentally honking the horn when manoeuvring. Thanks to the attachment kit, instant access to the tank lid is provided when necessary. There are three mesh pockets on the outside for small items. Right by the zip on the inside is a coin pocket, specially designed to hold small change and toll tickets for easy access at toll stations. The mobile phone compartment integrated inside the map pocket holds your mobile enabling you to stay in touch with the outside world while travelling. The integrated power cord extension is protected against water, so your mobile can also be operated by mains power. The volume can be increased from 20 to approx. 26 litres. With the comfortable carrying handle, the tank bag also looks good without a motorbike. It can also be used as a rucksack with the enclosed straps. Dimensions (l x w x h): approx. 36 x 28 x 22/27 cm 655-1013 Tank Bag Daytrip Kawasaki Versys 1000/650 Your perfect tankbag for small trips and/or daily use. Enough space for all the important things. The tank bag follows the tankline very decently and it is almost unvisible during your ride. With map compartement and nice handle. At the elastics on one side you can fix additional material. Thanks to the easy-to-use mounting kit, the tankbag is securely fiexd to your bike, but can also easily be removed at the gas station. Dimensions (l x w x h): approx. 36 x 23 x 11 cm Capacity: approx. 9 litres 655-1002 New Style small Tank Bag Kawasaki Versys 1000/650 Our New Style tank bag shows a lot of detailed solutions. The outside netpockets provide space for small things ready to use. The organizer compartement inside allows you to keep important things organized. The removable map compartement is a must for touring. The big 3M reflective applications give you more security. With the comfortable handle, the bag can be easily carried and with the included straps it can be used as a backpack. The practical mounting kit secures the tankbag on the tank and allows an easy removal. The tank bag is made out of strong Cordura fabric. Dimensions (l x w x h): approx. 36 x 26 x 18 cm; Capacity: approx. 16 litres 655-1017
Tail rack bag Touring Kawasaki Versys 1000/650 The new generation of motorbike luggage systems, in a sportive design. Light, flexibel and in the same style than the tankbag Touring. The Rearbag was designed together with the tankbag and builds a nice and practical unit on your motorcycle. The available space of about 21 liters is build out of strong Cordura fabric and is equipped with water repellent zippers. Big 3M reflective applications give an additional security on the bike. Dimensions (l x w x h): approx. 31 x 31 x 23 cm, Volume: approx. 21 litre 055-1247 Tail Rack Bag PILLION SEAT Kawasaki Versys 1000 This tail bag can be secured either on the rear seat or the luggage rack, which is located under the rear seat. A zip expands the bag to up to 25 litres of volume. In addition, there is an elastic cord which can be used to store wet rain gear, a Velcro fastener on the plastic piece of the rear frame and an outside bag for the little things you d otherwise find yourself searching for. With the eyelets on the tail bag, it s possible to easily tie down an object to the top of the bag. This tail bag can be converted to a backpack using the included straps. Colours: black, grey, Dimensions: approx. 35 x 30 x 15/26 cm, Volume: approx. 15/25 L, For all 1200GS, also 2008! 055-1224 Shock absorber, rear silencer Kawasaki Versys Water protected 675 Tail Rack Bag Daytrip Kawasaki Versys 1000 The new generation of motorbike luggage systems, reduced to the max. Light, flexibel and in the same style as the tankbag Daytrip. The rearbag was designed together with the tankbag and builds nice and practical unit on your GTR. The available space of about 21 liters gives you enough space for a short trip or the daily drive to your work. The mounting kit is fixed with velcro under the seat. With two strong zippers the bag is fixed safely on the bag and can be removed easily. Thanks to the handle the bag can be used as handluggage or businessbag. Dimensions (l x w x h): approx. 36 x 30 x 20 cm, Capacity: approx. 21 litres 055-1248 Water protected New Style FLAT rear pannier Kawasaki Versys 1000 Our rear pannier was designed together with the tank bag to make a practical unit. The large storage capacity of approx. 11 litres (expandable to 22 litres) is tailored to the space requirements of a mini tour or the daily trip to work. Dimensions (l x w x h): approx. 30 x 33 cm x 13/25 cm, Volume: approx. 11 / 22 litre 055-1246
676 Comfort seat Kawasaki Versys 650 Unfortunately, the original seat does not offer ideal characteristics for riding longer distances - not to mention the lack of comfort afforded to the pillion passenger! We have remedied these shortcomings by developing and producing our own, anatomically shaped foam core in combination with our tried-andtested bi-elastic, sweat-resistant sand effect covering material. The seat is 100% waterproof. This high quality seat is supplied complete and ready-to-fit - there is no delay waiting for reupholstery work. It does not require any modifications to your motorbike and simply replaces the original seat, which you can keep. - Top quality materials manufactured to the highest standards - Made in Germany Comfort seat Versys 650 low 408-5912 standard 408-5913 high 408-5914 breathable standard 407-5916 breathable high 408-5917 Pannier Racks for Kawasaki Versys 650, black Robust steel pannier frame made from 18mm diameter steel. Tube with a 2 mm thick wall. Black plastic coated. Approx. 53 cm width Easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included. Can be used with our ZEGA-panniers or other panniers in conjuction with our 18 mm mounting hardware.: 01-053-0020-0. - incl. indicator repositioning, original indicators can be re-used overall width: 49 cm 408-5555 Versys 650 407-5560 Versys 1000
Frame protection Kawasaki Versys 677 ZEGA Pro Pannier System Kawasaki Versys 650 with Stainless Steel Rack The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm stainless steel tubing and is attached to existing mounting points. Pillion comfort not restricted in any way. Aluminium pannier system, premounted. Delivery schedule of the system: - 2 aluminium panniers ZEGA Pro, with pre-fitted 18 mm fixing kit - 1 stainless steel pannier rack including mounting hardware ZEGA Pro pannier system Versys 650 ZEGA Pro 31/31 litres 408-5750 ZEGA Pro AND-S 31/31 litres 408-5751 ZEGA Pro AND-Black 31/31 litres 408-5752 ZEGA Pro 38/38 litres 408-5760 ZEGA Pro AND-S 38/38 litres 408-5761 ZEGA Pro AND-Black 38/38 litres 408-5762 ZEGA Pro 45/45 litres 408-5770 ZEGA Pro AND-S 45/45 litres 408-5771 ZEGA Pro AND-Black 45/45 litres 408-5772 Zega Pro Topcase rack, black for Kawasaki Versys 1000 / 650 The special carrier for our ZEGA PRO Topcases. Made entirely of stainless steel and specifically designed for the Kawasaki attachment points, the Topcase rack is the perfect way to attach ZEGA PRO Topcases to your bike. The Topcase rack can be used on its own or in conjunction with our pannier system. 407-5455 Versys 1000 408-5455 Versys 650