690 Kawasaki Versys Kawasaki KLR650 special parts www.touratech.de/kawasakiversys www.touratech.de/kawasakiklr650
700 Headlight Protector Steel Kawasaki KLR 650 Welded steel mesh headlight protector for the KLR. The shape of the guard aligns with the design of the KLR headlight. It is supported by four steel braces at the windscreen screws. Gloss black plastic coating. The headlight protector does not have German TÜVtype approval and was developed for off-road use. 409-5095 Large Engine Guard, Kawasaki KLR 650 The Touratech engine guard bolts onto the original mounting points. All installation materials are included, except where the original bolts are used. An opening for the oil drain plug lets you change the engine oil without removing the engine guard. 409-5140 Manifold Guard for Kawasaki KLR650 Effectively prevents damage to rider s clothing and manifold. Useful accessory, which generally pays for itself the first time it s used. Very simple, fast and secure mounting. 409-5070 Side stand switch protector Kawasaki KLR650 from 2008 The side stand switch often goes completely unnoticed. It s only when it stops working and the bike keeps refusing to start that you realise just how important this component is. So we ve made a stainless steel protector for the side stand switch. It s effective and matches the engineering quality and design of the Kawasaki KLR650. 409-5105
Kawasaki KLR 650 701 Progressive fork springs for Kawasaki KLR650 from 2008 These progressive fork springs are perfectly matched to the fork on the Kawasaki KLR650. They make the fork better suited to the demands of motorcycle touring. You will also experience a significantly improved response and greater reserves in extreme situations. The fork springs are made in Europe by Dutch suspension specialists Hyperpro. Info: Only fits * Kawasaki KLR650 from 2008 * 409-5838 Hyperpro progressive replacement springs for fork and shock absorber for Kawasaki KLR650 from 2008 409-5839 Touratech Suspension shock absorber *rear* for Kawasaki KLR650 from 2008 This shock absorber is the right choice for normal touring on the Kawasaki KLR650. This type of shock absorber offers a large adjustment range with plenty of reserves to meet the demands of motorbike travel. Its floating piston design and fine damping adjustment enable a more suitable suspension setup and better balance than is possible with the bike manufacturer s standard components. To compensate for large luggage loads, the spring preload can be adjusted using an adjustment tool. 409-5860 *Level1* 409-5880 *Level2* Pivot Pegz - *Mark3* for Kawasaki KLR 650 from 87 -> Thanks to a spring joint, these foot pegs follow the forward and backward movements of the foot to an angle of 20 degrees. 040-5513
702 ZEGA Pro Topcase and Luggage Rack Kawasaki KLR 650 The special carrier for our ZEGA PRO Topcases. Made entirely of stainless steel and specifically designed for the KLR s attachment points, the Topcase rack is the perfect way to attach ZEGA Pro Topcases to your bike. The Topcase rack can be used on its own or in conjunction with our pannier system. You will find the available Topcases on page 1068. 409-5455 Pannier Rack Kawasaki KLR 650 The robust pannier rack is made from 18 mm steel tubing and is black powdercoated. Using special fixing clips, the pannier rack is attached to the rack tail and existing mounting points. Very robust construction with crosspiece which also copes with tough off-road tours and yet elegantly matches the overall appearance of the KLR. Delivery schedule: pannier racks with all attachments and mounting hardware 409-5560 (black)
703 ca. 96,0 cm ca. 104,0 cm 38 31 45 38 ZEGA Aluminium Pannier System Kawasaki KLR 650 Delivery schedule of the system: 2 aluminium panniers ZEGA 1 pannier rack including mounting hardware ZEGA Mundo ZEGA Pro ZEGA Pro AND-S ZEGA Pro AND-Black 31/38 l 409-6180 409-5780 409-5781 409-5782 38/45 l - 409-5785 409-5786 409-5787 For more details on the ZEGA Pro panniers see page 1038 and the following.