POWER TOOLS Industrial Safety Welding Oilfield Construction

Angle Grinder Parts & Accessories...............527 Angle Grinders Corded.................... 527-528 Angle Grinders Cordless.......................532 Auger Drill Bits...............................513 Band Saw Parts & Accessories............... 501-502 Band Saws Corded.......................... 502 Band Saws Cordless.......................503-504 Band Saws Horizontal/Vertical................. 504 Batteries, Cordless Tool....................... 500 Battery Chargers............................ 501 Belt Sanders Corded..........................535 Bench Grinder Parts & Accessories...............533 Bench Grinders..............................533 Carbide Burs................................513 Chop & Cut-Off Saw Parts & Accessories......504-505 Chop & Cut-Off Saws Corded............... 505-507 Chucks & Keys........................... 513-514 Circular Saw Parts & Accessories............. 507-508 Circular Saws Corded......................... 508 Combo Kits Cordless......................539-540 Coring Parts & Accessories................. 512-513 Coring Rigs & Motors.........................513 Crimper Parts & Accessories....................512 Cut-Out Tools Cordless....................... 508 Die Grinders Corded......................... 534 Disc Sander Parts & Accessories.................535 Drill Bit Sharpeners...........................514 Drill Parts & Accessories.......................514 Drill Presses Corded...........................512 Drills Corded............................ 518-519 Drills Cordless........................... 520-521 Engravers Corded............................527 Hammer Drill Bits............................ 536 Heat Guns Corded............................537 Hole Saw Sets...............................514 Hole Saws.............................. 514-515 Impact Drivers Cordless....................... 523 Impact Wrenches Corded......................524 Impact Wrenches Cordless.....................525 Jig Saws Corded............................ 509 Power Bits..................................515 Reciprocating Saw Parts & Accessories............510 Reciprocating Saws Corded................. 510-511 Reciprocating Saws Cordless....................511 Rotary Hammers Corded...................... 536 Rotary Hammers Cordless..................... 536 Rotary Tool Parts & Accessories.................535 Rotary Tools Corded..........................535 Screwdrivers Corded......................... 522 Screwdrivers Cordless........................ 523 Soldering Iron Parts & Accessories.............. 538 Soldering Irons Cordless................... 538-539 Soldering Stations Corded..................... 539 Step Drill Bit Sets.............................515 Step Drill Bits............................ 515-516 Straight Grinders Corded................... 534-535 Twist Drill Bit Sets........................ 516-517 Twist Drill Bits........................... 517-518 2016 1.800.678.6577 499

CORDLESS TOOL BATTERIES & CHARGERS Batteries, Cordless Tool 20V MAX* Lithium Ion Batteries Extended run time battery provides performance and long battery life. No memory and virtually no self discharge for maximum productivity and less downtime. Batt. Type: Lithium Ion Height: 3 5/8 in Length: 9 1/4 in Width: 7 in XRP Rechargeable Battery Packs High capacity with more run time than standard batteries. Allows users to run multiple tools off of the same battery pack. Durable, long life. Voltage Type 115 DC9091 14.4 V Battery Pack 115 DC9096 18 V Battery Pack 115 DC9096 2 18 V Battery Combo Pack 115 DCB200 2 Extended Run-Time Batteries Voltage 20 V Durable slide rail interface keeps battery securely in place even during the most extreme applications. FAN COOLED technology cools down battery quickly thus extending battery life. Fan cooled battery and charger technology increases run time and number of recharges. High capacity XR+ pack battery offers extended run time without sacrificing number of recharges. Powers entire DEWALT line of 24V tools. Batt. Type: NiCad For Model: DW0246; DW0249 Style: High Capacity LXT Batteries 5x lower self discharge keeps battery cells active and ready for use, even after long periods of storage. Battery s built in Memory Chip communicates with the charger to maximize battery life using 3 Active Controls (Current, Voltage & Thermal). Built in shock absorbing features protect the battery. LXT Lithium Ion battery and optimum charging system produces 280% total lifetime work with 2x more cycles. Batt. Type: Lithium Ion 458 BL1830 Batt. Cap. 3 A h Voltage Batt. Cap. 115 DW0242 24.00 V 2.4 A h XRP Li-Ion Batteries XRP Li Ion extended run time battery provides long run time & battery life. Lightweight design. No memory and virtually no self discharge for maximum productivity and less downtime. Batt. Type: Lithium Ion Voltage Batt. Cap. 115 DC9182 18V 2 A h Rechargeable Batteries Ni MH batteries have longer run time than standard Nickel Cadmium batteries. Able to use multiple tools with same battery. Ergonomic design. Batt. Type: NiMH Style: Pod Voltage Batt. Cap. 458 193159 1 18 V 2.6 A h ORSNASCO.COM 500 2016

Battery Chargers 18V XC High Capacity Batteries Battery fuel gauge displays remaining run time. Increased run time with 40% less weight than an 18V NiCad battery. Batt. Type: Lithium Ion Voltage 495 48 11 1828 18 VDC 1-Hour Chargers Battery fuel gauge indicates how much charge is in the battery. Cord wrap provides improved cord storage. Batt. Charging Cap. Batt. Type 115 DC9310 7 1/5 18 Volt NiCad; NiMH; Lithium Ion; Except Univolt CUTTING TOOLS 28V Batteries Provides optimized performance and overload protection using total system communication between tool, battery and charger. Offers long lasting performance and durability. Fuel gauge onboard: Displays remaining runtime for less downtime on the job. Batt. Type: Lithium Ion Voltage Batt. Cap. 495 48 11 2830 28 VDC 3 A h M18 REDLITHIUM XC 4.0 Extended Capacity Battery Packs Delivers up to 2X more runtime, 20% more power and 2X more recharges than standard lithium ion batteries. The M18 REDLITHIUM XC 4.0 Extended Capacity Battery Pack features superior pack construction, electronics and performance to deliver more work per charge and more work over pack life than any battery on the market. It offers 4.0 amp hours of runtime. With Milwaukee durability built into each pack, this battery runs cooler and performs in climates below 0 F. Managed by Milwaukee s exclusive REDLINK Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy duty situations, while the discharge protection prevents cell damage. The temperature management system and individual cell monitoring help maximize battery life. Switch to the REDLITHIUM 4.0 XC Extended Battery Pack to instantly upgrade the runtime and durability of your Milwaukee M18 cordless tools. For Model: M18 Tools Style: Slide on Height: 3.31 in Length: 6.11 in Width: 6.81 in Voltage Batt. Cap. 495 48 11 1840 18 V 4.A h Band Saws Powerband Matrix II HSS Bi-Metal Portable Bandsaw Blades Cuts harder materials. Fits Black & Decker, Greenlee, Milwaukee, Rockwell, Ridgid, Porter Cable, Skil, and Unitec machine models. For general purpose cutting on portable bandsaw machines. Ready to use. Welded length. Cutting Edge Material: HSS Applicable Materials: Soft/Medium Materials; Stainless Steel; Hard Steel Teeth Per Inch Width Thickness 681 15708 10; 14 1/2 in 0.02 in 681 14601 14 1/2 in 0.02 in 681 14602 18 1/2 in 0.02 in Master-Band Band Premium Band Saw Blades Thicker and with the Tuff Tooth design for the toughest cutting applications. Enhanced beam strength that reduces blade deflection and twist. 8% cobalt high speed cutting edge resists higher cutting temperature. An additional 30% in width of the tool steel tooth makes for stronger teeth and less tooth strippage on most difficult cutting applications. Width: 1/2 in Thickness: 0.023 in Cutting Edge Material: HSS E (Co M42) Applicable Materials: Most Metals Cutting Cap. Cutting Length Teeth Per Inch 433 80116 3/32 in 1/4 in 44 7/8 in 18 433 80112 1/8 in 5/16 in 44 7/8 in 14/18 433 80114 1/4 in 1/4 in 44 7/8 in 10 14 2016 1.800.678.6577 501

Wolf-Band Portable Band Saw Blades High speed steel teeth provide a strong, long lasting cutting edge. Bi metal blades bend and resist breaking and extend blade life. Professional performance and competitive pricing provide extraordinary cost per cut value. Thickness: 0.02 in Cutting Edge Material: HSS E (Co M42) Applicable Materials: Most Metals Replacement Blade Pulley Tires Made of durable rubber. Easy slide on installation. Test & Approvals: Complies with OSHA and UL Requirements Width 495 45 69 0010 0.3 in Cutting Cap. Cutting Length Teeth Per Inch Width 433 38425 3/32 in 1/4 in 44 7/8 in 18 1/2 in 433 38427 1/8 in 5/16 in 44 7/8 in 14/18 1/2 in Master Cobalt Portable Band Saw Blades Shock resistant teeth great for cutting machinable metals. Straight pitch teeth for better chip clearance and fast cutting. High resistance to heat and wear. Width: 1/2 in Thickness: 0.02 in Cutting Edge Material: HSS Cutting Length Teeth Per Inch 497 ZWEP4418W 44 7/8 in 18 497 ZWEP441418MC 44 7/8 in 14/18 Band Saw Blades Style Applicable Materials Standard Most Metals; Stainless Steel Pitch Variable Most Metals Pitch Bi Metal blades outlast conventional blades up to 3 times, requiring fewer blade changes. Designed with varying set angles and gullet depths to break up the harmonic vibrations generated in cutting, resulting in smoother, quieter cutting and longer blade life. Extremely hard and uniform tooth point is electron beam welded to a tough, durable backing, with high life for faster cutting, longer blade life. For cutting common materials 5/32 3/16 thick and very hard materials 3/16 5/16 thick. Cutting Edge Material: HSS E (Co M42) Applicable Materials: Non Ferrous Soft Metal; Stainless Steel; Soft/Medium Steel; Non Ferrous Soft Metal; Soft/Medium Steel; Stainless Steel Length Teeth Per Inch Width Thickness 495 48 39 0511 44 7/8 in 14 1/2 in 0.02 in 495 48 39 0521 44 7/8 in 18 1/2 in 0.02 in 495 48 39 0551 44 7/8 in 14 Oct 1/2 in Heavy-Duty Deep Cut Porta-Band Saws Dual bearing blade guide rollers increase durability in the blade support system. AC/DC switch use in both alternating and direct current. Blade tracking adjustment increases blade life by providing better blade tracking. Speed control knobs allows user to tailor the blade speed for various applications. Blade Thickness: 0.02 in Linear Speed: 100 ft/min 245 ft/min Amps: 6 A Voltage Type: AC/DC Handle Type: Pommel Front Handle Width: 21 1/2 in Cutting Cap. Blade Length 115 DW328 4 1/2 x 4 3/4 in Round; 4 3/4 in Rectangular 44 7/8 in Heavy-Duty Deep Cut Variable Speed Band Saws Rubber bumpers protect guards from jobsite abuse. Integrated hang hook allows user to hang the saw without damaging front handle or castings. Dual bearing blade guide rollers increase durability in the blade support system. Blade Thickness: 0.02 in Linear Speed: 100 ft/min 350 ft/min Amps: 10 A Voltage Type: AC Blade Length: 44 7/8 in Cutting Cap. Voltage Control Type Handle Type 115 DWM120 5 in Round; 5 in x Variable speed Multi position 120V 4 3/4 in Rectangular switch adjustable front handle 115 DWM120K* 5 in Round; 5 in x Variable speed Multi Position Bale 120 V 4 3/4 in Rectangular switch Front Handle * : Kit Box ORSNASCO.COM 502 2016

Deep Cut Band Saws AC/DC Optimum speed range. Slim motor housing. All ball and roller bearings. 2X more durabe shrouds with Job Site Armor Technology. Completely sealed design around gear housing. Gear protecting clutch. High torque worm gear with direct drive. LED light and tool free shoe. Test & Approvals: Complies with OSHA and UL Requirements Blade Thickness: 0.02 in Voltage: 120 V Voltage Type: AC/DC Control Type: Trigger Drive Gearing: Worm Gearing Handle Type: Top D Handle/Top T Handle Portable Electric Band Saws Center of gravity located directly over blade. Self lubricating for maximum wear resistance. Test & Approvals: Complies with OSHA and UL Requirements Blade Thickness: 0.02 in Voltage: 120 V Voltage Type: AC Control Type: Trigger Drive Gearing: Worm Gearing Handle Type: Top D Handle/Top T Handle Cutting Cap. Blade Length 495 6225 3 1/2 in. (Round Stock); 3 1/2 x 4 1/2 in (Rectangular Stock) 44 7/8 in 495 6226 3 1/2 in. (Round Stock); 3 1/2 x 4 1/2 in (Rectangular Stock) 44 7/8 in 4 7/8 in. (Round Stock); 4 7/8 495 6232 20 x 4 7/8 in (Rectangular Stock) 44 7/8 in Linear Speed 200 ft/min 250 ft/min 200 ft/min 250 ft/min 0 ft/min 420 ft/min Amps 6 A; 5 A 6 A; 5 A 10.5 A Cutting Cap. 4 7/8 in. (Round Stock); 495 6238 20 4 7/8 x 4 7/8 in (Rectangular Stock) 5 in Rectangular Stock; 495 6238 21 5 in Round Stock Blade Length 44 7/8 in Linear Speed 0 ft/min 420 ft/min Amps 10.5 A; 5.5 A 35 3/8 in 380 ft/min 11 A Deep Cut Variable Band Saw Provides maximum performance and durability. Maintains cut speed in the toughest applications. Slimmer motor housing increases user line of site delivering superior cut accuracy. Test & Approvals: Complies with OSHA and UL Requirements Blade Thickness: 0.02 in Linear Speed: 0 ft/min 380 ft/min Amps: 11 A Voltage: 120 V Voltage Type: AC Control Type: Trigger Drive Gearing: Worm Gearing Handle Type: Top D Handle/Top T Handle Width: 21 in Cutting Cap. Blade Length 495 6232 21 5 in Rectangular Stock; 5 in Round Stock 35 3/8 in M18 FUEL Deep Cut Band Saws POWERSTATE Brushless Motor increases cutting speed and power through the toughest applications. CPT Constant Power Technology helps maintain cut speed in the toughest applications for optimal performance. Jobsite Armor Technology :Proprietary composite material and crush zone barriers provide long lasting rugged protection. REDLINK PLUS Intelligence is the most advanced system of cordless power tool electronics, providing optimized performance and overload protection using total system communication between tool, battery and charger. All metal direct drive: Delivers maximum tool life with all metal direct drive gearing system, while requiring less servicing than a chain drive. Tool Free locking adjustable shoe: Button actuated tool free design allows user to quickly adjust from an extended shoe to no shoe in seconds. LED light: Illuminates work surface for increased accuracy and productivity. Adjustable shoe allows for less tool rotation when cutting material above 5 in. Batt. Type: Lithium Ion Cutting Cap.: 5 in x 5 in Length: 8.380 in Handle Type: Top D Handle : (2) M18 REDLITHIUM XC Batteries; M18 & M12 Multi Voltage Charger; Case; 1 Blade Voltage Batt. Cap. 495 2729 22 18 V 4 A h 2016 1.800.678.6577 503

Chop & Cut-Off Saws M18 Cordless Band Saws Compact light weight design for cutting overhead and in tight places. Cuts most common materials for electrician, plumber and mechanical cutting applications. LED work light illuminates the cut line in dark areas. Tool free adjustable material shoe quickly adjusts the shoe and allows flush cuts when working with installed materials against walls and ceilings. Drop resistant pulley guard engineered geometries and high impact polymer. Blade ejection system quickly changes the blade by moving the material guide into the up position and depressing the blade ejection button. Test & Approvals: Complies with OSHA and UL Requirements Batt. Type: Lithium Ion Handle Type: Top D Handle/Top T Handle Voltage Batt. Cap. 495 2629 22 18 V 3 A h 495 2629 20 18 V 3 A h Cutting Cap. Length 3 1/4 in. (Round Stock); 3 1/4 x 3 1/4 in. (Rectangular Stock) 3 1/4 in (Round Stock); 3 1/4 x 3 1/4 in (Rectangular Stock) 18 in 16.9 in (2) M18 XC High Capacity Batteries; 1 Hour Charger; Case (1) M18 Cordless LITHIUM ION Band Saw (2629 20) HVBS-7MW Horizontal/Vertical Bandsaw Single phase metalworking bandsaw with lock off trigger. Powered by 3/4 HP motor. Shuts off automatically after each cut. 3/4 in carbon steel blade. Test & Approvals: UL Phase: Single Blade Width: 3/4 in Blade Length: 93 in Blade Thickness: 0.032 in Drive Gearing: Worm Gearing Throat Depth: 7 in Tilt: 45 Height: 41 in Length: 49 1/2 in Power Cap. Voltage 825 414459 3/4 hp 115 VAC; 230 VAC High Speed Wheels Designed to be durable, hard working blades for a variety of cutting applications in metal, concrete, ductile pipe and asphalt. Thicker fiberglass to withstand extreme applications and hold up to high speed saws. Specially formulated to provide fast, free cutting and good life. Cutting Edge Material: High Performance Aluminum Oxide Applicable Materials: Rebar; Steel Pipe; Sheet Metal; Structural Steel; Stainless Steel Applications: Metal Cutting Blade Diam Arbor Diam. Grit Speed 115 DW8020 14 in 1 in A24R 5,500 rpm Metal Cutting Saw Blades 12% titanium carbide provides long life in metal cutting. Modified ATB tooth geometry provides clean, burr free cuts. Tri foil braze absorbs stress, making the tip stronger. Expansion slots dissipate heat which extends blade life. Arbor Diam: 1 in No. of Teeth: 66 Speed: 1,800 rpm Applicable Materials: Ferrous Metal 115 DWA7747 Type 1 - Cutting Wheels Blade Diam 14 in Double reinforced with two full sheets of fiberglass for safety and performance. Premium grain for added wheel life and speed. Enhanced formulations provide longer life and optimal performance. High quality resin bonds that are 100% inspected before use for product consistency and quality. Arbor Diam: 1 in No. of Teeth: 0 Grit: A24R Speed: 4,400 rpm Applicable Materials: Metal Applications: General Purpose 115 DW8001 Blade Diam 14 in ORSNASCO.COM 504 2016

TCT Metal-Cutting Blades Evolution saw blades are designed to deliver maximum performance by using the highest grade carbide, hardened blade bodies, and ultra high grade brazing techniques. All offer premium quality. Designed to increase performance. Cutting Edge Material: Carbide Applications: Square Tube; Angle Iron; Mild Steel Plate; Pipe; Tube; Ferrous Metals Blade No. of Applicable Arbor Diam Speed Diam Teeth Materials 510 180BLADE ST 7 in 20 mm 36 3,900 rpm Mild Steel 510 185BLADE ST 7 1/4 in 5/8 in 40 5,800 rpm Mild Steel 510 8BLADE MS 8 in 5/8 in 50 5,800 rpm Mild Steel 510 230BLADE ST 9 in 1 in 48 3,000 rpm Mild Steel 510 10BLADE ST 10 in 1 in; 5/8 in 52 5,200 rpm Mild Steel 510 12BLADE ST 12 in 1 in 60 1,600 rpm Mild Steel 510 14BLADE AL 14 in 1 in 80 1,600 rpm Aluminum 510 14BLADE ST 14 in 1 in 66 1,600 rpm Mild Steel 510 14BLADE SSN 14 in 1 in 90 1,600 rpm Stainless Steel TCT Rage2 Replacement Blade Keep chop saws functioning longer with a sturdy replacement blade. Cuts wood, steel, aluminum and plastic. Use with Rage2 14 Multipurpose Chop Saw and EVOSAW380 15 Steel Cutting Chop Saw. Arbor Diam: 1 in No. of Teeth: 36 Speed: 1,400 rpm Cutting Edge Material: Carbide Applicable Materials: Aluminum; Plastic; Steel; Wood Applications: Mild Steel; Aluminum; Brass; Copper; Wood; Wood with Nails; Plastics; PVC; Plexiglas 510 RAGE355BLADE Blade Diam 14 in Metal Devil NXT Circular Saw Blades The Metal Devil NXT combines strength, long life and technology in one complete package. Manufacturing processes combine plate technology and carbide science to result in premium cutting performance in the most demanding of metal cutting applications. Cutting Edge Material: Carbide Tipped Applications: Steel Blade Diam Arbor Diam. No. of Teeth Speed 497 CSM1466NSC 14 in 1 in 66 1,800 rpm Carbide-Tipped Metal Blades Fast, virtually burr free cuts. Leaves material cool to touch. Arbor Diam: 1 in No. of Teeth: 60 Cutting Edge Material: Carbide Tipped Applicable Materials: Ferrous Metals Applications: Ferrous Metal Cutting 458 A 90532 Blade Diam 12 in Ferrous Metal Abrasive Cut-Off Wheels Internal reinforced arbor. Smooth, fast cutting. For all ferrous materials (steel, cast iron and other metals). Arbor Diam: 1 in Applications: Ferrous Metal Standard Blade Diam Grit Cutting Edge Material Quantity 458 A 93859 5 14 in 36 Aluminum Oxide 5 per pack 458 A 93859 25 14 in 36 Aluminum Oxide 25 per pack 458 724701 3 16 in A36P Aluminum Oxide 5 per pack Chop Saws Heavy duty compression spring provides smooth movement and greater durability than torsion springs. Heavy duty lock down pin allows head of the saw to be locked in the carrying position without the use of a chain. Patented tool free, 45º adjustable fence allows for fast and accurate angle cuts without the hassle of using a wrench. Quick lock vise allows for fast clamping on different size materials to increase productivity. Spindle lock allows user to make wheel changes fast and easy saving time and money. The solid steel base also allows users to weld jigs or stops directly to the base. Voltage Type: AC/DC Control Type: Quick Lock Vise Handle Type: D Handle Blade Diam.: 14 in Arbor Diam.: 1 in : 14 in Abrasive Wheel; Wrench Power Voltage Amps Speed Cutting Cap Cap 15 A Max Capacity (Rectangular) 4 x 7 5/8 115 D28710 4 hp 120 V 3,800 rpm AC/DC in; Max Capacity (Round) 5 in 15A Max Capacity (Round) 5 in; Max 115 D28715 5 1/2 hp 120 V 4,000 rpm AC/DC Capacity (Rectangular) 4 x 6 1/2 in 2016 1.800.678.6577 505

Multi-Cutter Saws Multi Cutter cuts 4 times faster than chop saws and 8 times faster than portable band saws in 2 x 2 x 1/4 angle iron. Largest capacity in its class. Patented tool free, 45º adjustable fence. Quick lock vise for fast clamping on different material sizes. Extra wide solid steel base provides increased stability. Offers versatility by cutting a wide variety of materials including ferrous and non ferrous metals. Utilizing a carbide tipped blade allows the depth of cut to remain constant throughout blade life. 14 in 70 tooth carbide tipped blade delivers a lower cost per cut compared to cutting with abrasive wheels. Specially designed carbide teeth deliver fast, precise, virtually burr free cuts reducing the need for preparation grinding, and finished cuts that are cool to the touch. Durable metal top handle allows the saw to be carried easily. Heavy duty lock down pin On board wheel change wrench allows for convenient storage and greatly reduces the risk of lost wrenches. Easily accessible brushes for convenient servicing. Heavy duty compression spring provides smooth movement and greater durability than torsion springs. Voltage Type: AC Amps: 15A AC/DC;15 A Cutting Cap: 5 3/16 in; 6 1/2 in (90 crosscut) @ 4 1/2 in Phase: Single : Wrench; Vertical Clamp; 14 in. 70 Tooth Carbide Tipped Blade; Spindle Lock; Quick Lock Vise Blade Diam Arbor Diam Power Cap Voltage Speed 115 DW872 14 in 1 in 4 hp 120V 1,300 rpm EVO Steel-Cutting Chop Saws Cuts mild steel cleanly without excessive heat, burrs or the necessity of coolant. Longer lasting: 1 steel cutting blade = 20 or more abrasive discs. Cuts all types of materials including mild steel, aluminum & Stainless Steel. 4X faster cutting than abrasive saws. 15 blade capacity for extended reach. Test & Approvals: CSA Voltage Type: AC Amps: 15 A Cutting Cap: 5 in (90 Square Steel);3 1/2 in (45 Square Steel); 3 3/4 x 7 7/8 in (90 Rectangle Steel); 3 x 4 3/8 in (45 Rectangle Steel); 5 7/8 in (90 Round Steel); 5 in (45 Round Steel); 4 x 8 in (90 Wood); 4 x 4 in (45 Wood) Control Type: On/Off Trigger Switch : 14 Mild Steel Cutting Blade; V Block; Clamping Handle; Spare; Carbon Brush Set; Hex Wrench; Safety Goggles; Ear Plugs; Manual Blade Diam Arbor Diam Power Cap Voltage Speed 510 EVO380 14 in 1 in 2.4 hp 120V 1,450 rpm Rage2 Multi-Purpose Chop Saws Multi purpose cuts steel, aluminum, wood & plastic. Faster & cleaner cuts than an abrasive wheel. No coolant required & produces virtually no sparks. Offers an instantly workable finish. Doesn t lose depth of cut during use like an abrasive wheel does. V Block Vise for securely clamping pipe. Test & Approvals: CSA Power Cap: 2.5 hp Voltage: 120 V Voltage Type: AC Amps: 15 A Speed: 1,450 rpm Cutting Cap: 4 3/4 x 4 3/4 in (90 Box);3 1/2 x 3 1/2 in ( 45 Box);4 x 7 in (90 Rectangle);3 x 4 1/3 in (45 Rectangle);5 1/8 in (90 Round);4 1/8 in (45 Round) Control Type: On/Off Trigger Switch Handle Type: Top D Handle : RAGE2 Multi Purpose TCT Blade; V Block; Chip Collector Bin; Hex Wrench; Spare Carbon Brush Set; Safety Goggles; Ear Plugs; Manual Blade Diam Arbor Diam 510 RAGE2 14 in 1 in Cut-Off Saws Quick release vise for secure stock retention and fast repeated cut offs. Spark diversion guard for operators safety. Socket wrench stores on base for convenience. Guide plate adjusts 45 right and left. D shape handle for easy gripping. Adjustable depth stop for precise repeatable cutting depth. Shaft lock for easy wheel changes. Lock off button. Double insulated. Voltage: 115 VAC Voltage Type: AC Amps: 15 A Speed: 3,800 rpm Cutting Cap: 4 1/2 in (90 Crosscut); 4 1/2 in (45 Bevel) Phase: Single Control Type: Lock off Button Handle Type: D shape : Spark Diversion Guard Blade Diam Arbor Diam 458 2414NB 14 in 1 in ORSNASCO.COM 506 2016

Circular Saws 8 Metal Cutting Saws Durable magnesium blade shield deflects hot metal chips and sparks. Integral chip tank efficiently collects waste for easy clean up. Depth of cut is for one pass through most metal stud, grating, panel, and decking. Exclusive quick release blade shield latch for convenient chip disposal and blade changes. Convenient guard retraction lever for plunge cuts. Voltage: 120 VAC Voltage Type: AC Amps: 13 A Speed: 3,700 rpm Cutting Cap: 2 9/16 in Control Type: On/Off Handle Type: Soft Grip Carbide-Tipped Circular Saw Blades Corrosion resistant coating helps prevent rusting. Precision ground teeth for smooth, accurate cuts. No. of Teeth: 24 Applications: Framing/Ripping Grind: ATB Kerf: 0.106 in Packing Type: Bulk Tooth Angle: 18 Type: Saw Blade Blade Diam Arbor Diam 585 25130 7 1/4 in 5/8 in Blade Diam Arbor Diam 495 6370 21 8 in 5/8 in 495 6370 20 8 in 5/8 in Carbide Tipped Metal Cutting Blade; Carrying Case; Hex Blade Wrench Carbide Tipped Metal Cutting Blade; Hex Blade Wrench Metal Cutting Blades Laser cut blade. Laser cut anti vibration vents. Metal cutting grade carbide teeth. Anti Kickback tooth shoulder. Abrasive Cut-Off Machines Completely tool free. Quick change abrasive wheel system. Quick release and adjustable vise. Tool free adjustable back fence. Heavy duty cast iron base. Test & Approvals: Complies with OSHA and UL Requirements Power Cap: 4 hp Voltage: 120 V Voltage Type: AC/DC Amps: 15 A Speed: 3,900 rpm Cutting Cap: 5 in; 4 5/8 in Phase: Single Control Type: On/Off Handle Type: Pistol Grip Neck Depth: 9 in : Wheel; Wrench Blade Diam Arbor Diam 495 6177 20 14 in 1 in Blade Diam Arbor Diam No. of Teeth Wt. 585 4935558 12 in 1 in 60 2 1/2 lb 585 4935559 14 in 1 in 80 3 lb Metal Cutting Circular Saw Blades Titanium carbide tipped blade resists material build up. Less burring than abrasive cutting. Reduced material burning. No. of Teeth: 400 Teeth Per Inch: 50 Applications: Steel Cutting Grind: ATB Kerf: 0.19 in Packing Type: Carded Blade Diam Arbor Diam 433 21884 8 in 5/8 in 2016 1.800.678.6577 507

Endurance Carbide Circular Saw Blades Endurance blades offer faster cutting and extra long life for contractors. Carbide teeth made of C3 grade micro ground carbide keeps the cutting edge sharper for longer periods of time. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansion slots prevent blade distortion and increase blade life. All of these features add up to a good quality blade that contractors can depend on, time and time again. Applications: Dry Cut Blade Diam Arbor Diam No. of Teeth Teeth Per Inch Type 495 48 40 4515 8 in 5/8 in 42 5.25 Dry Cut 495 48 40 4520 8 in 5/8 in 50 6.25 tpi Dry Cut 495 48 40 4505 14 in 1 in 72 5.14 tpi Dry Cut DW364 Circular Saws Rear pivot depth of cut adjustment allows your hand to remain behind the tool at all depth of cuts. Powerful motor made for long life and difficult applications. Heavy gauge, high strength aluminum alloy base for increased durability on worksite. 50 beveling capacity increases capacity in various applications. Amps: 15 A Speed: 5,800 rpm Cutting Cap.: 2 1/4 in (45 ); 2 15/16 in (90 ) Max: Cutting Angle: 50 Bevel : Blade Wrench; Carbide Tipped Blade 115 DW364 Blade Dia 7 1/4 in Steel Cutting Circular Saws Rated for heavy duty and industrial applications with chip collection capability. Cuts mild steel without excessive heat, burrs or the necessity of coolants. High quality construction designed for portability. Voltage: 120 V Frequency: 60 Hz Amps: 15 A Max: Cutting Angle: 45 Bevel Control Type: On/Off Trigger Switch Handle Type: Auxiliary Front Handle Blade Dia 510 STEELSAW1 7 1/4 in Arbor Diam Power Cap. Speed 20 mm 2.25 hp 3,900 rpm 510 EVO230HDX 9 in 1 in 2.35 hp 2,700 rpm Cut-Out Tools Cordless Cut-Out Tools Cutting Cap. 2 1/4 in @ 90 ;1 3/8 in @ 45 3 1/4 in @ 90 ;2 1/8 in @ 45 7 1/4 Steel Cutting Blade; Carrying Case; Ear Plugs; Fence Guide; Manual; Safety Goggles; Side Handle; Spare Carbon Brush Set; Wrench (2) Batteries;9 Steel Cutting Blade; Carrying Case; Ear Plugs; Fence Guide; Manual; Safety Goggles; Side Handle; Spare Carbon Brush Set; Wrench Dewalt exclusive NANO phosphate lithium ion cells offer long battery life and durability: 2,000 recharges. Quick change wheel release provides easier and quicker wheel removal without the need for a wrench. Jam pot, low profile gear case provides precise gear alignment for smoother, quieter transmission while allowing access to tight spaces. Speed: 6,500 rpm Spindle Thread: 5/8 in 11 Control Type: Trigger; Lock Off Button Voltage Blade Dia 115 DC415KL 36 V 4 1/2 in 1 Hour Charger; (2) Batteries; Type 1 & 27 Guards; Wrench; (2) Matched Flanges; Type 1 Cutting Wheel; Type 27 Grinding Wheel; Side Handle; Heavy Duty Kit Box 115 DC411KA 18 V 4 1/2 in 1 Hour Charger; (2) 18V XRP Battery; Type 27 Guard; Type 1 Guard; Wrench; (2) Matched Flanges; Type 1 Cutting Wheel; 2 Position Side Handle; Contractor Bag 115 DC411B 18 V 4 1/2 in Bare Tool; Type 27 Guard; Type 1 Guard; Wrench; (2) Matched Flanges; Type 1 Cutting Wheel; 2 Position Side Handle ORSNASCO.COM 508 2016

Jig Saws Jig Saws Durable. Long lasting. Amps: 4.5 A; 5.5 A Length: 13.444 in : Blade; Heavy Duty Kit Box; Allen Keys Stroke Length Cycle Rate 115 DW317K 1 in 3,100 strokes/min Reciprocating Saws Metal Cutting Reciprocating Blades with WeldTec Cuts all metals including nonferrous, pipe, conduit, stainless and sheet metal. Use with materials 1/8in 1/2in (3.2 13 mm) thick. Bi metal construction for faster cutting and added durability. Precision set teeth for faster, smoother cuts. Weldtec tooth design makes the blade stronger and last longer. Width: 738 in Length Thickness Teeth Per Inch Cutting Edge Material Quantity 585 372614BB 6 in 0.035 in 14 Bi Metal 50 PK 585 372618BB 6 in 0.035 in 18 Bi Metal 50 PK 585 372618B 6 in 0.035 in 18 Bi Metal 25 PK 585 372818BB 8 in 0.035 in 18 HSS 25 PK Bi-Metal Recip Blades Tuff Tooth bi metal reciprocating blades are shatter resistant, their teeth retain their sharpness, and they cut fast. All reciprocating blades are of bi metal material which means they cut stronger, faster and longer. Thickness: 0.05 in Teeth Per Inch: 10; 14 Applicable Material: Soft/Medium Materials; Plastic; Wood; Non Ferrous Soft Metal; Rubber; Nail Embedded Wood; Titanium; Hard Steel; Stainless Steel; Cast Iron; Abrasives; Plaster Applications: Nail embedded wood;medium metal;non ferrous soft metal;plastic;soft/medium materials Cutting Edge Material: HSS Length Width 433 20583 12 in 3/4 in Demolition Recip Blades Tuff Tooth bimetal reciprocating blades are shatter resistant, their teeth retain their sharpness, and they cut fast. All reciprocating blades are of bi metal material which means they cut stronger, faster and longer. Thickness: 0.062 in Teeth Per Inch: 10 Shank Type: Universal Applicable Material: Most Metals; Wood Applications: Metal Cutting Cutting Edge Material: HSS Material: Bi Metal Quantity: 25 per pack Length Width 433 20524 9 in 7/8 in Metal & Wood Cutting Reciprocating Blades with WeldTec Cuts composition materials, plastic, pipe, carbon steel and stainless steel. Use with materials 1/8 in and thicker. Electronic beam weld for stronger, longer lasting teeth. Bimetal construction for faster cutting and added durability. Precision set teeth for faster, smoother cuts. Thickness: 0.05 in Cutting Edge Material: Bi Metal Length Teeth Per Inch Quantity 585 372810BB 8 in 10 50 per pack 585 372110BB 12 in 10 14 50 per pack Gold Reciprocating Saw Blades Specially formulated Titanium edge improves the wear resistance of the teeth for faster cuts. Bimetal technology flexes, resists breaking and extends blade life. Thickness: 0.042 in Shank Type: Standard Applications: Demolition Cutting Edge Material: Titanium Material: Bi Metal Length Width 433 21226 6 in 1 in 2016 1.800.678.6577 509

T2 Bi-Metal Reciprocating Saw Blades Cutting blade uses an optimized, reinforced tooth geometry. Design minimizes friction and heat build up while cutting through the widest variety of metal materials. Bi metal design stands up to the most demanding applications. Thickness: 0.035 in Cutting Edge Material: HSS Length Width Teeth Per Inch 433 20564 6 in 3/4 in 14 433 20529 6 in 3/4 in 18 433 20566 6 in 3/4 in 18 433 20578 8 in 3/4 in 18 Applicable Material Applications Non Ferrous Soft Metal; Stainless Steel; Structural Steel; Rubber Metal cutting Non Ferrous Soft Metal; Stainless Steel; Structural Steel Metal Cutting Non Ferrous Soft Metal; Stainless Steel; Structural Steel Metal cutting Non Ferrous Soft Metal; Stainless Steel; Structural Steel Metal cutting Thin Kerf SAWZALL Blades Tooth configuration is optimized for extended life and increased cutting speed. Tough Neck ribs strengthen the blade tang and protect against breakage. Blade has a short profile and thin body making it ideal for fast flexible cuts. Thickness: 0.035 in Shank Type: 1/2 in Universal Cutting Edge Material: HSS E (Co M42) Material: Bi Metal Length Width Teeth Per Inch 495 48 00 5182 6 in 3/4 in 14 Applicable Material Most Metals; Plastic Applications Demolition; Rescue; Remodeling 495 48 00 5184 6 in 3/4 in 18 Most Metals Demolition; Rescue; Remodeling 495 48 01 6188 9 in 3/4 in 18 Most Metals Metal Cutting 495 48 00 5188 9 in 3/4 in 18 Most Metals Demolition; Rescue; Remodeling 495 48 00 5189 12 in 3/4 in 18 Most Metals Demolition; Rescue; Remodeling Bimetal Reciprocating Saw Blades 8% Cobalt edge offers more wear resistance. Matrix II cutting edge has shock resistant teeth that resist strippage. Available in a variety of blade thicknesses to meet flexibility and rigidity needs for different applications. Shank Type: Standard Applications: Cutting Wood, Metal, Composite, Drywall Cutting Edge Material: HSS E (Co M42) Material: HSS Quantity: 50 per tube Length Width 497 RB6501014T50 6 in 3/4 in Reciprocating Saws Reciprocating saw designed with variable speed control matches the correct speed to application for increased control. Powerful motor designed for heavy duty applications. Variable speed trigger allows user to instantly control speed at the trigger. Amps: 10 A Length: 17 1/2 in Bit/Blade Mounting Type: Keyless Stroke Length Cycle Rate 115 DWE304 1 1/8 in 0 strokes/min 2,800 strokes/min High Performance Bi-Metal Sawzall Blades 1/2 universal blade tang fits in all Sawzalls. Bi Metal construction increases blade life, blades do not shatter. Matrix II teeth with 8% cobalt. Thickness: 0.042 in Shank Type: 1/2 in. Universal Applicable Material: Most Metals; Wood; Masonry Materials Applications: Demolition; Rescue; Remodeling Cutting Edge Material: HSS E (Co M42) Material: Bi Metal Quantity: 5 per pouch Length Width Teeth Per Inch 495 48 00 5787 9 in 1 in 14 495 48 00 5788 9 in 1 in 18 495 48 00 5789 12 in 1 in 18 Orbital Super Sawzalls Exclusive gear protecting clutch. Heavy duty quick change blade clamp. Amps: 13 A Voltage: 120 V AC Length: 18 3/4 in Bit/Blade Mounting Type: Keyless Handle Type: Variable Speed Trigger : Saw; Carrying Case Stroke Length Cycle Rate 495 6536 21 1 1/4 in 0 strokes/min 3,000 strokes/min ORSNASCO.COM 510 2016

Sawzall Reciprocating Saws Gear protecting clutch extends gear and motor life by absorbing high impact forces. QUIK LOK blade clamp offers fast tool free blade changes. Delivers exceptional cut speed, durability and power. Amps: 12 A Voltage: 120 VAC Bit/Blade Mounting Type: Tool Free Handle Type: Back D Handle/Body Grip Stroke Length 495 6509 31 3/4 in 495 6519 30 1 1/8 in Super Sawzall Reciprocating Saws Cycle Rate Length 0 strokes/min 3,000 strokes/min 19 in Carrying Case 0 strokes/min 3,000 strokes/min 9 1/4 in; 17.3 in Constant Power Technology maintains constant speed under load for unmatched cutting performance. Patented Gear Protecting Clutch extends gear and motor life by absorbing high impact forces caused by sudden blade lock ups. Patented Counter Balanced Mechanism smoothest running, lowest vibrating reciprocating saw in the industry. Quik Lok Blade Clamp System provides fast and easy blade changes. Also has orbital action. Amps: 15 A Voltage: 120 VAC Length: 18 3/4 in Handle Type: Back D Handle Stroke Length Cycle Rate 495 6538 21 1 1/4 in 0 strokes/min 2,800 strokes/min Cordless Reciprocating Saws Keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft. Variable speed with trigger lock for more precise cutting. Stroke Length: 1 1/8 in Cycle Rate: 3,000 strokes/min : 1 Hour Charger; 18V XRP Battery; Heavy Duty Kit Box M18 FUEL SAWZALL Reciprocating Saws Superior performance: Delivers the fastest cutting speed in its class, increased power and the durability of corded saws. POWERSTATE Brushless Motor: Supplies constant power for faster cuts and reduced heat for extended life. REDLINK PLUS Intelligence: Provides optimized performance and overload protection using total system communication between tool, battery and charger. REDLITHIUM XC 4.0 Battery Pack: Provides superior pack construction, more work per charge and more work over the life of the pack. Batt. Type: REDLITHIUM Stroke Length: 1 1/8 in Cycle Rate: 3,000 strokes/min Length: 19.9 in : (2) M18 REDLITHIUM XC 4.0 Extended Capacity Battery Pack (48 11 1840); Blade; Carrying Case; M18 & M12 Multi Voltage Charger (48 59 1812) Voltage Batt. Cap. 495 2720 22 18 V 4 A h V28 Cordless Sawzall Recip Saws Quik Lok blade clamp for quick tool free blade changes. Gear protecting clutch for extreme durability. Keyless shoe adjustment quickly adjusts blade depth. Batt. Type: Lithium Ion Stroke Length: 1 1/8 in Cycle Rate: 3,000 strokes/min Handle Type: Non Slip; Soft Grip : (2) Blades; (2) Batteries; 1 Hour Charger; Impact Resistant Carrying Case Voltage Batt. Cap. 495 0719 22 28 V 3 A h 115 DC385K Voltage 18 V 2016 1.800.678.6577 511

DRILLING & FASTENING TOOLS Crimpers Electromagnetic Drill Presses Automatic base/chip de mag. Forward/reverse control. Base control panel includes variable speed adjustment for motor. Feedback speed control. Computer controlled reverse. Solid state electronic switching. Automatic electronic soft start. Motor/magnet interlock. Full wave magnetic holding power. Line lock out prevents operation should voltage be restored to an interrupted line when switch is locked on.. For any flat ferrous material 1/2 and thicker. Test & Approvals: Complies with OSHA and UL Requirements RP340 Pressing Tool Kits 30% smaller tool increases manuverability. 17% lighter tool reduces operator fatigue. More than 400 presses per charge (with advanced Li Ion batteries). Ultimate flexibility with the ability to switch between battery and AC power on the same tool. 270 degree barrel jaw swivel. LED light for continued operations. Crimping Size 632 43358 1/2 in 4 in Floor Drill Presses 6 ProPress Jaws (1/2, 3/4, 1, 1 1/4, 1 1/2, 2 ); Battery Charger; 2 Li Ion Batteries; Carrying Case Drill Presses Cast iron head. Head casting features a permanently lubricated ball bearing spindle assembly, using four heavy duty ball bearings mounted in an enclosed quill for extended life. Massive T slotted production work table. Test & Approvals: CSA Speed: 4,200 rpm : Hinged Metal Belt and Pulley Cover 825 354170 Amps Speed 495 4206 1 12.5 A 350 rpm Adjustable Position Electromagnetic Drill Press Base; 3/4 Motor for Electromagnetic Drill Press 495 4208 1 12.5 A Adjustable Position Electromagnetic Drill Press Base; No. 250 rpm 3 MT Motor for Electromagnetic Drill Press Heavy-Duty Compact Electromagnetic Drill Presses Simple two button control panel. Light weight, only 26.5 lbs with comfortable carrying handle. Capacity to cut up to 2 in. diameter holes thru 2 in. steel with annular cutters. Uses annular cutters from 1/2 2 in 1 and 2 depth of cut. Speed: 450 rpm Amps 495 4270 21 9:00 AM Lubricant Spray Bottle; Nylon Safety Strap; Hex Wrenches; Carrying Case 495 4270 20 9:00 AM Lubricant Spray Bottle; Nylon Safety Strap; Hex Wrenches Diamond Coring Bits Drills Segments are silver brazed into a notched tube to offer exceptional segment support. Designed specifically for the extra demands of drilling pre stressed concrete. Arbor Thread TPI or Pitch: 5/8 in 11 Cutting Edge Material: Diamond : (1) Bit Applicable Materials: Masonry Materials Shank Type: Hollow & Threaded Tooth Shape: Segment Type Cutting Depth Cutting Diam. Length 495 48 16 1506 Hole Saw 14 in 1 1/2 in 14 in ORSNASCO.COM 512 2016

Diamond Coring Motors For diamond coring in reinforced concrete, tile, masonry, or natural stone. Clutch protection protects gears and motor against overload. Triple reduction gearing on all models. Dual torque/speed ranges. All ball and roller bearings. Built in water swivel all models. Test & Approvals: Complies with OSHA and UL Requirements Control Type: On/Off 2 Speed Motor Protection: Clutch NEMA/IEC Configuration: NEMA Twist Lock Plug; L5 20P Speed: 450 rpm; 900 rpm Voltage: 120 VAC Amps Arbor Thread TPI or Pitch 495 4096 20.00 A 1 1/4 in 7 Carbide Bur Bits Manufactured in compliance with the highest quality standards. Outstanding quality, long service life and excellent stock removal performance allow for economical work with diverse materials, delivering excellent results. Easily identified by laser imprinted EDP number, SCTI number and cut information on the shank. Packed individually in a sturdy reliable plastic box that protects the quality of the cutting edges. Enhanced labeling technology ensures that the imprinted label information will remain readable permanently. Cut Type: Alternate Diamond Cutting Length: 1 in Cutting Dia: 1/2 in Shank Dia Cutting Edge Material 419 24722 1/4 in Submicrograin Solid Carbide Impact Wrench Utility Pole Auger Bits Single spur, cutter, and side lip bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. Hex shank design for use in impact wrench drills. Full length heat treated bit guards against bending in heavy duty applications and strengthens the twist where the greatest strain occurs. Bit can be resharpened. Medium fast screw point ideal for general woodboring applications. Shank Type Cutting Dia Overall Length Dia. 585 47913 Hex 13/16 in 18 in 13/16 in Power Drill Power Pole Auger Bits Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips. Extra long twist is ideal for boring large poles, construction timbers, and for multiple timber applications. All bits feature 7/16 adaptable hex shank. simply remove it to use round shank. Full length heat treatment guards against bending in heavy duty applications and strengthens the twist where the greatest strain occurs. Bit can be resharpened. Medium fast screw point ideal for general woodboring applications. Shank Dia: 7/16 in Shank Type Cutting Dia Overall Length Dia. 585 47009 Cylinder+Hex 9/16 in 29 in 9/16 in Ball Bearing Chucks 1 piece fluted sleeve construction. Ball trust bearing reduces friction in chuck closing mechansim. Through hardened sleeve teeth, nose, and keyholes for wear resistance. Maximizes gripping force and drilling accuracy. Treated to ensure thread life and high gripping surface hardness. Jaws center ground for absolute straightness and alignment. For heavy duty, close tolerance production drilling. For production drilling equipment, jig borers, milling machines, lathes, and radials. Mechanism: Ball Bearing Finish: Fluted Sleeve Type Capacity Capacity Overall Length 0.04 in 1/2 in 403 30221 Keyed (mild (mild steel) steel) Overall Length Key Size Housing Diam 2.97 in 3.88 in K3 2.4 in 403 30227 Keyed 3.26 in 4.31 in K4 2.6 in 403 30233 Keyed 1/8 in (mild steel) 3/4 in (mild steel) 3.95 in 5.12 in K4 3 in Mounting Jacobs 3JT Female Jacobs 3JT Female Jacobs 4JT Female 2016 1.800.678.6577 513

Hand-Tite Keyless Drill Chucks Patented keyless design. Rugged construction. High mechanical advantage converts hand tightening torque into superior bit gripping force. Ergonomic design. Fast bit changing. No lost key delays. For variable speed corded and cordless portable drills. Test & Approvals: Meets or Exceeds DIN Run Out and Dimensional Specifications Overall Length: 2.9 in Housing Diam: 1.7 in Finish: Hard Nose Black Capacity Key Size Mechanism Mounting 403 31038.062 in.5 in Keyless Hand Tightening Threaded 1/2 20 403 31037.062 in.5 in Keyless Hand Tightening Threaded 3/8 24 Thumb Handle Chuck Keys Soft steel handles. Precision crafted. Mechanism: Thumb Type Key Size Wt. 403 3651 Key K3 0.20 lb 403 3655 Key K4 0.36 lb Pilot Point 29-Piece Gold Ferrous Oxide Drill Bit Sets Pilot Point starts on contact. Unique, no spin shank keeps bits securely seated to save you time and frustration. Patented, tapered web ensures durability for less broken bits. Side markings above the shank for reference points that don Inchest wear away. metal index, split point bits from 1/16 inch to 1/8 inch, and Pilot Point bits from 9/64 inch to 1/2 inch in 64th inch increments. Finish: Gold Ferrous Oxide No. of Flutes: 29 Length: 10 in Applications: Metal;Plastic;Wood Point Angle: Pilot Point Shank Type: No Spin Round Shank 115 DW1969 Cutting Diam 1/16 in 1/2 in Electrician s Hole Saw Kits Door lock kit utilizes C clamp design with tool free clamping and no surface damage. Door lock kit utilizes alignment window and taller bushings to deliver accurate height placement and straight drilling. Applicable Materials: Bi Metal Material; Wood Cutting Edge Material: Bi Metal Material Cutting Dia Carrying Case; Mandrels: 1/4 in and 7/16 in; 7/8 in; 1 1/8 in; 1 3/8 in; 1 115 D180002 Saws: 7/8 in; 1 1/8 in; 1 3/8 in; 1 3/4 in; 2 in; 3/4 in; 2 in; 2 1/2 in 2 1/2 in Drill Bit Sharpeners Easy 2 step sharpening (align & sharpen). Sharpens bits in less than 60 seconds. Sharpens HSS, TiN coated and carbide. Point Angle: 118 ; 135 : E Z Align System; Diamond Grinding Wheel; Chuck; Video; Case Voltage: 110 VAC Cord Length: 6 ft Bit Diam Capacities 244 DD750X 3/4 in A Z Letter Size Drill DepthCyclone Premium Annular Cutters Annular cutters save time and energy when compared to other hole producing methods. While cutting only the periphery of the hole, annular cutters produce a ream quality, burr free hole. No step drilling is required and holes are cut quickly and accurately. Cutting Diam Cutting Depth Applicable Materials 510 CC812L 13/16 in 2 in Most Metals 510 CC812 13/16 in 1 in Most Metals Used With Magnetic Drill Presses Magnetic Drill Presses Cutting Edge Material HSS HSS ORSNASCO.COM 514 2016

Steel Hawg One-Piece Cutter Hole Saws Alternating tooth form geometry for faster cutting. Carbide teeth for longer life and cleaner cuts. Self ejector and centering pin for faster plug removal and accurate cuts. Applicable Materials: Cast Iron; Steel Used With: 1/2 in Chuck Cutting Edge Material: Carbide Cutting Diam Cutting Depth 495 49 57 8068 11/16 in 1/2 in 495 49 57 8081 13/16 in 1/2 in Kwik Stepper Step Bit Kits Unique split tip design penetrates through steel faster. Resists walking or skidding, even on round surfaces. Balanced, double flute construction requires less pressure, does the work for you. Multi hole step bit. Shank Diam: 3/8 in; 1/4 in No. of Flutes: 2 Cutting Diam Applicable Materials 332 35884 1/8 in 1 1/8 in Mild Steel; Copper; Brass; Aluminum; Wood; Plastic; Laminates Phillips Power Bits High grade tool steel. Part number labeled on bit piece. Drive Size: 1/4 in Material: Tool Steel Operating Type: Power Tool Type: Nutsetter Power Bit Tip Size Overall Length Finish Measuring System 071 492X #2 1 15/16 in Tempered Inch 071 492 AX #2 2 3/4 in Tempered Inch 071 492 BX #2 3 1/2 in Tempered Inch Kwik Stepper Step Bits Unique split tip design penetrates through steel faster. Resists walking or skidding, even on round surfaces. Balanced, double flute construction requires less pressure, does the work for you. Multi hole step bit. Designed and manufactured in the USA. Measurement Type: Fractional Cutting Edge Material: Mild Steel; Copper; Brass; Aluminum; Wood; Plastic; Laminate Cutting Diam. Material Thickness No. of Steps 332 30008 1/2 in 1 1/8 in 10 gauge 12 332 36414 1 3/8 in 7/8 in 3/8 in 6 Phillips Head Power Bits Used in high torque power tools. Designed for use in power drill chuck and chuck adapter. Overall Length: 1 15/16 in Drive Size: 1/4 in (hex) Material: High Grade S2 Tool Steel Measuring System: Inch Operating Type: Power Tool Tip Size 585 93007 #2 Cobalt Step Drills 6X longer life. Laser marked sizes. No. of Steps: 12 Measurement Type: Fractional Cutting Edge Material: M35 Cobalt HSS Cutting Diam. Material Thickness 585 10234CB 3/16 in 7/8 in 1/16 in 2016 1.800.678.6577 515

High Speed Steel Fractional Hole Enlarging Single flute cutting edge for greater control through steps. 3 flatted shank prevents slipping in drill chuck. Also available with titanium nitride coating for longer life. Patented single flute cutting edge gives the user a true round hole every time. Ideal for drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates. Pilot hole required. Measurement Type: Fractional Cutting Edge Material: HSS Cutting Diam. Material Thickness No. of Steps 585 10220 9/16 in 1 in 1/8 in 8 585 10221 13/16 in 1 3/8 in 1/8 in 10 High Speed Steel Fractional Self-Starting Single flute cutting edge for greater control through steps. Hex shank prevents slipping in drill chuck. Also available with (TiN) coating for longer life. New SpeedPoint tip penetrates faster than previous Unibits and prevents walking. Ideal for drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates. Measurement Type: Fractional Cutting Edge Material: HSS Cutting Diam. Material Thickness No. of Steps 585 10310 1/2 in 1/8 in 1 585 10313 1 1/8 in 1 585 10231 1/8 in 1/2 in 1/8 in 13 585 10232 3/16 in 1/2 in 1/8 in 6 585 10234 3/16 in 7/8 in 1/16 in 12 585 10233 1/4 in 3/4 in 3/8 in 9 585 10235 1/4 in 1 3/8 in 1/8 in 10 585 10239 7/8 in 1 1/8 in 1/8 in 2 Step Drill Sets Single flute cutting edge for greater control through steps. 3 flatted shank prevents slipping in drill chuck. Non skid self starting tip eliminates skidding and the need for center punching. 585 10225 585 10502 Titanium Fractional Self-Starting Ideal for drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates. Single flute cutting edge for greater control through steps. 3 flatted shank prevents slipping in drill chuck. New SpeedPoint tip penetrates faster than previous Unibits and prevents walking. Measurement Type: Fractional Cutting Edge Material: HSS Cutting Diam. Material Thickness No. of Steps 585 15101 1/8 in 1/2 in 1/8 in 13 585 15104 3/16 in 7/8 in 3/8 in 12 585 15103 1/4 in 3/4 in 3/8 in 9 Vari-Bit Step Drill Bits Sturdy step drill bits feature high speed steel construction and steam oxide coating. Patented design with two cutting flutes allows for clean burr free holes. Drill bits cut through materials faster than standard bits. Eliminates the problem of tip breakage on standard drill bits. Measurement Type: Fractional Cutting Edge Material: HSS Cutting Diam. No. of Steps 433 30883 1/4 in 3/4 in 9 433 30882 1/2 in 1 in 9 433 30912 7/8 in 1 3/8 in 5 29-pc Black and Gold Metal Index Drill Bit Sets Oxide treatment resists corrosion, helps prevent bit from rusting. Turbomax tip starts up to 10x faster. Flatted shanks above 11/64 eliminates slippage in drill chuck. Reduced shank above 3/8 allows the use of larger drill bits in a 3/8 chuck. Rubber overmolded case protects kit if dropped. Tap and Drill selection chart for convenient reference. Automatic indexing for easy bit access and identification. Removable cartridges: easy to carry bits from case to worksite. Sizes include 1/16 to 1/2 in 1/64 increments. Finish: Oxide : 29 piece set in metal index case includes drill bit sizes 1/16 in to 1/2 in in 1/64 in increments Increment: 1/64 in Cutting Diam 585 3018005 1/16 in 1/2 in ORSNASCO.COM 516 2016

29-pc Black Oxide Metal Index Drill Bit Sets Oxide treatment resists corrosion, helps prevent bit from rusting. 135 split point tip starts on contact, cuts with less force. Reduced shank above 3/8 allows the use of larger drill bits in a 3/8 chuck. Rubber overmolded case protects kit if dropped. Tap and Drill selection chart for convenient reference. Automatic indexing for easy bit access and identification. Removable cartridges: easy to carry bits from case to worksite. Sizes include 1/16 to 1/2 in 1/64 increments. Cutting Edge Material: HSS Finish: Black Oxide : 29 piece set in metal index case includes drill bit sizes 1/16 in to 1/2 in in 1/64 in increments Increment: 1/64 in Point Angle: 135 Type: HSS Drill Bit Set Cutting Diam 585 3018004 1/16 in 1/2 in 29-pc Cobalt M-35 Metal Index Drill Bit Sets Constructed of M 35 5 percent cobalt high speed steel for super abrasive resistance in tough metals. Cobalt steel extends cutting edge life and maintains cutting life after resharpening. Extra hard drill for greater wear. 135 split point tip starts on contact, cuts with less force. Reduced shank above 3/8 allows the use of larger drill bits in a 3/8 chuck. Rubber overmolded case protects kit if dropped. Tap & Drill selection chart for convenient reference. Automatic indexing for easy bit access and identification. Removable cartridges: easy to carry bits from case to worksite. Sizes include 1/16 to 1/2 in 1/64 increments. Cutting Edge Material: HSS Finish: Gold Oxide : 29 piece set in metal index case includes drill bit sizes 1/16 in to 1/2 in in 1/64 in increments Increment: 1/64 in Point Angle: 135 Cutting Diam 585 3018002 1/16 in 1/2 in 801 Series HSS Jobbers Length Drill Bit Sets Used where more precisely sized holes are required. Numbered. Drills exact hole size; ideal for tapping. Bits are constructed of M 2 high speed steel for best combination of strength, heat resistance, and wear resistance. Standard 118 degree point for use in wood, metal and plastic. Steel case index. Cutting Edge Material: HSS Finish: Bright : 60 piece set in metal index case Point Angle: 118 Size 585 80181 No. 1 60 High Speed Steel Drill Bit Sets Bit is constructed of high speed steel for the best combination of strength, heat, and wear resistance. Standard 118 degree point for use in wood, metal, and plastic. Cutting Edge Material: HSS Finish: Bright : 29 piece set in metal case includes drill bit sizes 1/16 in through 1/2 in in 1/64 in increments Point Angle: 118 Cutting Diam 585 60138 1/16 in 1/2 in Pilot Point Gold Ferrous Oxide Drill Bits Pilot Point Tip starts on contact for clean, accurate holes and reduces lock up on breakthrough. No Spin shank eliminates the frustration of bit spinning in the chuck. Tapered web provides greater durability to reduce breaking. Size markings are located above the shank to prevent wearing away. Bit Length: 3.62 in Finish: Gold Overall Length: 5 in Shank Type: Straight 115 DW1924B Cutting Diam 3/8 in 2016 1.800.678.6577 517

Cyclone Annular Cutters Cuts quickly and accurately. Creates smooth, burr free hole. No step drilling required. 510 CC562L 510 CC875L Cutting Diam 9/16 in 7/8 in General Purpose High Speed Steel Fractional Straight Shank Jobber Length Drill Bits Constructed of M 2 high speed steel for the best combination of strength, heat resistance, and wear resistance. Standard 118 degree point for use in wood, metal, and plastic. Bit Length: 7/8 in Applicable Material: Metal; Wood; Plastic Flute Length: 7/8 in Finish: Bright Overall Length: 1 7/8 in Shank Type: Straight Point Angle Cutting Diam 585 60108 118 1/8 in DWD210G 1/2 in Heavy-Duty Drills VSR pistol grip drill. 10 amp motor delivers increased drilling performance. Patented DEWALT built motor design generates 50% more power with increased overload protection for added durability. 0 1250 RPM, variable speed reversing switch for increased versatility. Soft grip handle and two finger trigger for increased comfort and greater control. 360 locking side handle with soft grip for greater control and versatility. Metal gear housing for jobsite durability and increased reliability. Amps: 10 A Speed:1,200 rpm Cutting Cap.: 1 1/2 in (wood with spade bit); 1 1/2 in (wood with auger bit); 1/2 in (steel with twist bit); 2 in (steel with hole saw) Cord Length: 8 ft Control Type: Trigger; Reverse Switch Handle Type: Pistol Grip; 360 Locking Side Handle : Locking 360 Side Handle Type: VSR Pistol Grip Drill Chuck Size Chuck Type 115 DWD210G 1/2 in Metal, Single Sleeve Ratcheting 1/2 in Heavy-Duty VSR Helical cut steel, heat treated gears for increased durability and long gear life. Metal gear housing for jobsite durability and increased reliability. Amps: 7.8 A Speed: 850 rpm Cutting Cap.: 3 1/2 in (wood) Cord Length: 8 ft Control Type: Trigger Handle Type: Pistol Grip Design : 360 Side Handle; Chuck Key w/holder Chuck Size Chuck Type 115 DW235G 1/2 in Keyed Right Angle Drills Compact right angle design for easy access in tight places. Die cast metal gear housing for jobsite durability and tool reliability. Amps: 3.7 A; 4 A Speed:1,200 rpm Cutting Cap.: 1 1/8 in (wood with spade bit);1 1/8 in (wood with hole saw);3/8 in (steel with twist bit) Control Type: Paddle Switch Handle Type: Pistol Grip Design : Chuck Key w/holder; Chuck Key with Holder Chuck Size Chuck Type 115 DW160V 3/8 in Keyed ORSNASCO.COM 518 2016

Spade Handle Drills AC/DC, forward/reverse rocker switch ideal for backing out jammed bits or mixing drywall mud. Increased durability in high torque applications with 5/8 in spindle. Two position rear spade handle and three position side handle gives greater control for all drilling and mixing applications. Triple gear reduction provides increased torque and reduces gear stress. Low 450 RPM provides increased torque for drilling large diameter holes in wood and metal. Variable speed reversible switch reduces air bubbles when mixing mud and offers greater control when drilling. Increased torque for drilling and mud mixing with 0 550 RPM. Soft grip handle for increased comfort. Cutting Cap.: 1 1/2 in (wood with auger bit);1/2 in (steel with twist bit);3 in (steel with hole saw) Cord Length: 8 ft Control Type: Variable Speed Reversible Switch Handle Type: 2 Position Spade Handle;3 Position Side Handle : Three position side handle and chuck key with holder Type: Spade Handle Mud Mixer EVOMAG42 Electromagnetic Drill Set Although small in size it is well suited for heavy duty industrial and fabrication work. Light weight makes it manageable to position in both awkward and confined spaces. Quick and easy adjustable head position. Heavy duty magnetic holding power. Voltage: 120 V Amps: 10 A Cutting Cap.: 1 1/8 in Spindle Thread: N/A Length: 12 1/2 in Cord Length: 8 ft Control Type: Manual Handle Type: Spoke : Carry Case; 1/2 in Drill Chuck & Key; Coolant Tank; Quick Release Coolant Hose; Three Hex Keys; Three Handles; Guard; Safety Strap; Safety Goggles; Ear Plugs; Manual Chuck Size Chuck Type 510 EVOMAG28 1/2 in 3/4 Weldon Shank and Jacob Chuck Chuck Size Chuck Type Voltage Amps Speed 115 DW130V 1/2 in Keyed 120 V 7 A; 9 A 550 rpm Electromagnetic Base-Drilling Systems Quick and easy adjustable head position. Heavy duty magnetic holding power. Twist drills up to 1/2 in dia. and is easily mounted with the supplied chuck and adaptor. Integrated coolant system. High quality construction. Spoke handles can be mounted on right or left side. Voltage: 115 V Amps: 10 A Cutting Cap.: 1 5/8 in Cord Length: 8 ft : Carry Case; 1/2 in Drill Chuck & Key; Chuck Adaptor; Three Handles; Safety Guard; Safety Strap; Safety Goggles; Ear Plugs; Manual Chuck Size Chuck Type 510 EVOMAG42 1/2 in Jacobs 1/2 in Compact Drills Rear mounted assist spade handle. Long switch and pipe handle for added control. For drilling and reaming large holes. Test & Approvals: Complies with OSHA and UL Requirements Voltage: 120 V Amps: 7 A Cutting Cap.: 1/2 in (steel) Spindle Thread: 5/8 in 16 Length: 12 1/4 in Cord Length: 8 ft Control Type: On/Off Handle Type: Back D Handle/Centered Pistol Grip/Top Rod : Pipe Handle Type: Straight Drill Chuck Size Chuck Type 495 1660 6 1/2 in Keyed 2016 1.800.678.6577 519

1/2 in Magnum Drills Heavy duty keyed chuck with holder provides stability during drilling and fastening. Features variable speed control and reverse. Durable build enables drill to handle industrial and construction applications with ease. Test & Approvals: Complies with OSHA and UL Requirements Voltage: 120 VAC Cutting Cap.: 1/2 in (steel) Spindle Thread: 1/2 in 20 Cord Length: 8 ft Control Type: Electronic Variable Type: Straight Drill Chuck Size 495 0234 6 1/2 in Keyed 5.5 A 950 rpm 495 0299 20 1/2 in Keyed 8 A 495 0300 20 1/2 in Keyed 8 A Super Hole-Shooters Chuck Type Amps Speed Length Handle Type 10 1/2 in Pistol Grip/Side Rod Pistol 850 rpm 12 13/64 in Grip/Side Rod 850 rpm Heavy duty aluminum alloy housing. Helical cut, heat treated gears. Long switch and pipe handle for added control. Drive shaft runs on pre lubricated ball bearings. Rear mounted assist spade handle. Test & Approvals: Complies with OSHA and UL Requirements Voltage: 120 V Amps: 10 A Cutting Cap.: 3/4 in (steel) Length: 18 1/2 in Cord Length: 8 ft Control Type: On/Off Handle Type: Back D Handle/Centered Pistol Grip/Top Rod : Pipe Handle Type: Straight Drill 12 13/64 in Soft Pistol Grip/Side Rod Chuck Size Chuck Type 495 1854 1 3/4 in Keyed Three Wire Quik Lok Cord; Chuck; Chuck Key; Rubber Flex Key Holder; Side Handle 360 Side Handle; Chuck; Chuck Key; Rubber Flex Key Holder 360 Side Handle; Chuck; Chuck Key; Rubber Flex Key Holder 18V Cordless Compact Hammerdrill Kits LED work light provides increased visibility in confined spaces. Compact size allows users to fit into tight spaces. Lightweight design minimizes user fatigue. Speed: 500 rpm; 1,700 rpm Cycle Rate: 8,500 blows/min; 29,000 blows/min Batt. Cap.: 1.7 Ah Batt Type: NiCd Length: 14 3/4 in Handle Type: Pistol Grip : (2) 18V Batteries; 1 Hour Charger; Screwdriver Bit; Heavy Duty Kit Box Voltage Chuck Size 115 DC725KA 18 V 1/2 in Cordless Compact Drill/Driver Kit LED work light provides increased visibility in confined spaces. Durable, right angle transmission with sealed ball bearing for a longer tool life. Compact size allows users to fit into tight spaces. Handle Type: Pistol Grip Voltage Chuck Size 115 DC742KA 12 V 3/8 in 115 DC720KA 18 V 1/2 in Cordless Compact Drill/Drivers Speed Torque Batt. Cap. Compact, lightweight design fits into tight areas. Ergonomic handle delivers comfort and control. Voltage Speed Chuck Size: 1/2 in 115 DCD760KL Chuck Size: 1/3 in 18 V Batt Type 1 Hour Charger; (2) 400 rpm; 1,450 rpm 350 in lb 1.7 NiCd 12V Batteries; Heavy Ah Duty Kit Box 1 Hour Charger; (2) 500 rpm; 1,700 rpm 450 in lb 18V Batteries; Heavy 500 rpm; 1,700 rpm Batt Type Length Handle Type Li Ion 8.2 in Pistol Grip 115 DCD780C2 20 V 6 rpm Lithium 10 1/8 in Ergonomic Duty Kit Box Heavy Duty Kit Box; (2) Li Ion Batteries; 30 Mintue Charger Belt Hook; (2) 20 V Max* Lithium Ion Battery; 30 Minute Fast charger; DCD780 1/2 in Drill Driver; On Board Bit Holder ORSNASCO.COM 520 2016

DeWalt DCD980M2 Cordless Drill/Drivers Three speed all metal transmission matches the tool to the task for fastest application speed. Heavy duty 1/2 metal ratcheting chuck with carbide inserts provide superior bit gripping strength. Batt Type: Lithium Ion Handle Type: 360 Side Handle : 1 Hour Charger; (2) 20V Max XR Premium Lithium Ion Batteries; Kit Box Voltage Chuck Size Speed Batt. Cap. Length 115 DCD980M2 20 V 1/2 in 2 rpm 4 A h 9 3/8 in Nano Technology Cordless Drills Exclusive NANO phosphate lithium ion cells offer long battery life & durability: 2,000 recharges. Patented 3 speed all metal transmission matches the speed to the application for optimal performance. 22 clutch settings. Cycle Rate: 6,800 blows/min; 20,400 blows/min; 27,200 blows/min Torque: 600 in lb Batt Type: Phosphate Lithium Ion Handle Type: Anti Slip Grip : 1 Hour Charger; (2) Batteries; 360 Degree Side Handle; Heavy Duty Kit Box Voltage Chuck Size Speed Batt. Cap. 115 DC901KL 36 V 1/2 in 400 rpm; 1,200 rpm; 1,600 rpm 2 A h XRP Cordless Drill/Driver Kits XRP extended run time batteries provide long run time & battery life. Patented 3 speed all metal transmission matches the tool to task for fastest application speed and improved run time. LED worklight provides increased visibility in confined spaces. Best in class length for improved balance and better control. LED worklight provides increased visibility in confined spaces. XRP extended run time batteries provide long run time & battery life. Speed: 500 rpm; 1,250 rpm; 2,000 rpm Length: 9 1/2 in : 1 Hour Charger; 360 Side Handle; Heavy Duty Kit Box; (2) XRP Batteries Voltage: 18 V Chuck Batt. Cycle Rate Batt Type Handle Type Size Cap. 8,500 blows/min; T Handle; Non 115 DCD950KX 1/2 in 21,250 blows/min; 2.4 Ah NiCd Slip; Soft Grip 34,000 blows/min 115 DCD940KX 1/2 in 4.0 Ah Lithium Ion T Handle XRP Nano Hammerdrill/Drill/Driver XRP Nano Phosphate Li Ion extended run time batteries provide superior ergonomics, long run time & battery life. Patented 3 speed all metal transmission matches the tool to task for fastest application speed and improved run time. LED worklight provides increased visibility in confined spaces. Offer long battery life and durability. High power, high efficiency motor delivers 450 unit watts out of max power for superior performance in all drilling and fastening applications. Speed: 500 rpm; 1,250 rpm; 2,000 rpm Cycle Rate: 8,500 blows/min; 21,250 blows/min; 34,000 blows/min Batt. Cap.: 2.2 Ah Batt Type: Phosphate Lithium Ion Length: 9 1/2 in Handle Type: T Handle;NonSlip;Soft Grip : 360 Side Handle; 1 Hour Charger; Heavy Duty Kit Box; (2) XRP Batteries Voltage Chuck Size 115 DCD970KL 18 V 1/2 in M12 Ratchet Kit REDLINK PLUS Intelligence prevents damage to the tool and battery due to overloading or overheating. On board fuel gauge helps to monitor the charge precisely for less downtime on the job. Built in LED light illuminates work surfaces in dark locations. Tool belt portable with a 3/4 inch, low profile head design for work in the tightest of spaces and engine bays. Speed: 250 rpm (no load) Torque: 335 ft lb Batt Type: Lithium Ion Length: 10 3/4 in : (1) M12 Cordless 3/8 Lithium Ion Ratchet (2457 20); (1) M12 REDLITHIUM Battery (48 11 2401); (1) M12 Lithium ion Battery Charger (48 59 2401); (1) Carrying Case Voltage 495 2457 21 12 V 2016 1.800.678.6577 521

M18 FUEL 2-Tool Combo Kit Kit includes Milwaukee cordless hammer drill/driver and cordless impact driver. Each tool features Powerstate brushless motor: hammer drill delivers 1200 in lbs of peak torque and up to 2000 RPM, impact driver provides 1800 in lbs of fastening torque. Four mode Drive Control provides greater control over output speed and power. durable carrying case. Speed: 2,000 rpm (Hammer Drill/Driver); 3,700 rpm (Impact Drill) Cycle Rate: 32,000 blows/min (Hammer Drill/Driver) Torque: 1200 in lb (Hammer Drill/Driver); 1800 in lb (Impact Driver) Length: 7 3/4 in (Hammer Drill/Driver); 5 1/4 in (Impact Driver) Handle Type: Side Handle (Hammer Drill/Driver); Pistol Grip (Impact Driver) : M18 FUEL 1/2 in Hammer Drill/Driver (Bare Tool) (2704 20); M18 FUEL 1/4 in Hex Impact Driver (Bare Tool) (2753 20); (2) M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack (48 11 1850); M18 & M12 Multi Voltage Charger (48 59 1812); (2) Belt Clips; (2) Bit Holders; Side Handle; Carrying Case Voltage Chuck Size Batt. Cap. Batt. Type 495 2897 22 18 V 1/2 in (Hammer Drill/Driver); 1/4 in (Impact Driver) 1.4 A h Lihium Ion M18 Compact 1/2 Drill Driver Kit Milwaukee 4 Pole Frameless Motor: robust design with rare earth magnets. Compact Design: allows greater accessibility in tight work spaces. All Metal Gear Case and Chuck: provide maximum impact and shock durability. REDLINK Intelligence: Advanced overload protects the tool against abusive situations and provides maximum life. Speed: 0 400/ 0 1,800 RPM Torque: 5 in/lb Batt. Cap.: 18 V Batt Type: Lithium ion Length: 7 1/4 in Handle Type: Pistol Grip : (2) M18 REDLITHIUM Compact Battery; (1) M18 & M12 Multi Voltage Charger; (1) Carrying Case Voltage Chuck Size 495 2606 22CT 18 V 1/2 in M18 High-Performance Cordless Drill/Drivers Powerful brushless motor. REDLINK PLUS Intelligence prevents damage to the tool and battery due to overloading or overheating. Batteries deliver more work per charge and more work over the life of the battery. Speed: 0 550/0 2,000 (no load) Batt Type: Lithium Ion Handle Type: Centered Pistol Grip; Side Handle : (1) M18 FUEL 1/2 Drill/Driver (Bare Tool) (2703 20); (2) M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack (48 11 1850); (1) M18 & M12 Multi Voltage Charger (48 59 1812); (1) Belt Clip; (1) Bit Holder; (1) Side Handle; (1) Carrying Case Voltage Chuck Size Torque Length 495 2703 22 18 V 1/2 in 1,200 in lb 7 1/2 in V28 Cordless Hammer/Drills All metal, single sleeve, ratcheting chuck with all carbide jaws. Exclusive Clip Lok system, secures tool to belt with one hand. Reversible battery pack. Speed: 0 450/0 1,800 RPM Cycle Rate: 9,0 blows/min; 27,0 blows/min Batt. Cap.: 3 A h Batt Type: Lithium Ion Handle Type: Non Slip; Soft Grip : (2) Batteries; Side Handle; Phillips Bit; 1 Hour Charger; Impact Resistant Carrying Case Voltage Chuck Size Torque Length 495 0726 22 28 V 1/2 in 6 in lb 10 1/2 in Screwdrivers Heavy-Duty VSR Versa-Clutch Drill/Drivers Depth sensitive set and forget nosepiece for consistent fastener depth. Two finger trigger for increased comfort. Helical cut steel, heat treated gears for long life and durability. High power motor for metal fastening applications. Versa clutch torque adjustment system to dial the proper torque needed to efficiently drive fasteners without stripping or breaking fastener. Excellent ergonomics offers less user fatigue. Rubber grip. Also available in 220V. Metal nose and gear case for durability on the job. Length: 12 in Max Fastener Size Amps Speed Torque 115 DW268 #14 6.5 A 0 rpm 2,500 rpm 132 in lb ORSNASCO.COM 522 2016

Wrenches Cordless Screwdrivers Has torque output that provides a superior power to weight ratio in a variety of fastening applications. Adjustable two position handle allows for operation as both in line and pistol grip. Heavy duty metal hinge provides secure and sustained two position lock. Industrial quick release hex shank chuck allows for quick screwdriver bit change and prevents bit run out. Variable speed and reversing trigger for fastening and pre drilling into wood, plastic and light gauge metal. Speed: 0 rpm 500 rpm Torque: 80 in lb 115 DW920K 2 Voltage 7.2 V Pocket Drive Cordless Drill/Drivers Eleven position clutch to prevent over torque in softer materials. Almost half the size of a 12 volt drill/driver. LED front light. Variable speed trigger forward reverse button. Drive Size: 1/4 in (hex) Drive Type: Quick Change Speed: 0 rpm 350 rpm; 1,300 rpm Torque: 265 in lb Length: 5.6 in : (2) Max Batteries; 30 Minute Charger; Carrying Bag Voltage Batt. Type 114 PS21 2A 12 V Litheon M4 1/4 Hex Screwdriver Kits 21 position clutch setting with auto shut off. 44 inch pounds of torque. 2 speed gearbox. Chuck Size: 1/4 in Hex Clutch Setting: 21 Speed: 200 rpm 600 rpm Torque: 44 in lb Length: 9.6 in Voltage Batt. Type 495 2101 22 4 V Red Lithium 495 2101 21 4 V Red Lithium Cordless Impact Drivers Frameless motor with replaceable brushes for extended tool durability and life. Allows access into tighter areas and reduces user fatigue. Textured ant slip comfort grip provides maximum comfort. Drive Size: 1/4 in Drive Type: Hex Shank Quick Release Speed: 0 rpm 2,400 rpm Cycle Rate: 0 blows/min 3,000 blows/min Torque: 1,330 in lb Length: 5 3/4 in : 1 Hour Charger; (2) 18V XRP Batteries; Heavy Duty Kit Box 115 DC825KA Voltage 18.00 V 2016 1.800.678.6577 523

Cordless XRP Li-Ion Impact Drivers Allows access into tighter areas and reduces user fatigue. Frameless motor with replaceable brushes for extended tool durability and life. Textured ant slip comfort grip provides maximum comfort. Drive Size: 1/4 in Drive Type: Hex Shank Quick Release Speed: 0 rpm 2,400 rpm Cycle Rate: 0 blows/min 2,700 blows/min Torque: 111 ft lb Length: 5 3/4 in : 1 Hour Charger; Heavy Duty Kit Box; (2) 18V Li Ion Batteries Voltage Batt. Type 115 DC827KL 18.00 V Li Ion Heavy Duty Impact Wrenches 345 ft lbs of deliverable torque in forward and reverse. Soft grip handle. Ball bearing construction for increased durability. Retainer Type: Detent Pin Speed: 2,100 rpm Torque: 345 ft lb Amps: 7.5 A Length: 11 1/4 in Cord Length: 11 1/4 in Control Type: On/Off/Reverse Handle Type: Soft Grip 115 DW292 115 DW294 Drive Size 1/2 in 3/4 in Cordless XRP Li-Ion Impact Wrenches Allows access into tighter areas and reduces user fatigue. Frameless motor with replaceable brushes for extended tool durability and life. Textured ant slip comfort grip provides maximum comfort. Drive Size: 1/2 in Drive Type: Square Speed: 0 rpm 2,400 rpm Cycle Rate: 0 blows/min 2,700 blows/min Torque: 145.00 ft lb Length: 5 3/4 in : 1 Hour Charger; Heavy Duty Kit Box; (2) 12V Li Ion Batteries Impact Wrenches Sturdy impact wrench provides 434 ft lbs of deliverable torque in forward and reverse. Easy forward or reverse, can run on AC or DC current. Ball bearing construction for increased durability. Externally replaceable brushes allow for quick repairs on the jobsite. Speed: 1,600 rpm Cycel Rate: 1,800 blows/min Torque: 434 ft lb Amps: 7.5 A Length: 13 in Cord Length: 13 in : 360 Side Handle Voltage Batt. Type 115 DC822KL 18.00 V Li Ion 115 DW297 Drive Size 3/4 in ORSNASCO.COM 524 2016

1/2 Square Drive Impact Wrenches Soft grip handle. Metal gear and transmission housing. Ergonomically balanced center grip. Test & Approvals: Complies with OSHA and UL Requirements Retainer Type: Detent Pin Speed: 0 1,800 rpm (no load) Cycel Rate: 2,600 ipm Voltage Type: AC/DC Length: 11 5/8 in Cord Length: 11 5/8 in Control Type: On/Off/Reverse Handle Type: Centered Pistol Grip : 2 Wire Fixed Cord Drive Size Drive Type Torque Voltage Amps 495 9070 20 1/2 in Square 300 ft/lb 120 V 7 A 3/4 Square Drive Impact Wrenches All metal housing. Soft grip handle. Ergonomically balanced center grip. Lockable forward/reverse switch. Friction ring and through hole rocket retention. Test & Approvals: Complies with OSHA and UL Requirements Retainer Type: Friction Ring Speed: 1,750 rpm Cycel Rate: 1,000 2,600 ipm (no load) Voltage Type: AC/DC Length: 11 5/8 in Cord Length: 11 5/8 in Control Type: On/Off/Reverse Handle Type: Centered Pistol Grip : 2 Wire Fixed Cord Drive Size Drive Type Torque Voltage Amps 495 9075 20 3/4 in Male Square 300 ft/lb 120 V 7 A DeWalt Cordless Impact Wrenches Preferred rocker switch design for fast and easy fastening. Comfort grip provides maximum comfort. Durable magnesium gear case and all metal transmission for extended durability. Heavy duty impacting mechanism directs torque to fastener without kickback. Voltage: 18 V Batt. Type: Lithium Ion Drive Type: Square Drive Retainer Speed Size Type Handle Type: Anti Slip Grip 115 DC823KA 3/8 in 115 DW059K 2 1/2 in Detent Pin Detent Pin 2,400 rpm 1,650 rpm Handle Type: T Handle; Anti Slip Grip 115 DC821KA 115 DC820KA 1/2 in 1/2 in Detent Pin Detent Pin NANO Cordless Impact Wrenches 2,100 rpm 2,400 rpm Cycle Rate 0 2,700 blows/ min 2,600 ipm 0 3,000 ipm 0 ipm 2,700 ipm Torque Control Type 125 ft lb Trigger 3,600in lb; 300 ft lb 1,920 in lb; 160 ft lb 1,740 in lb Rocker Switch Trigger Trigger (2) 18V XRP Batteries; 1 Hour Charger; Heavy Duty Kit Box 1 Hour Charger; (2) XRP Batteries; Heavy Duty Kit Box 1 Hour Charger; (2) XRP Batteries; Heavy Duty Kit Box Heavy Duty Kit Box; 1 Hour Charger; (2) XRP Batteries Dewalt exclusive NANO phosphate lithium ion cells offer long battery life & durability: 2,000 recharges. Heavy duty all metal anvil provides durability and prevents shearing. High power, high efficiency motor delivers maximum performance in all fastening applications. Variable speed reversible switch provides full range control for both setting and removing fasteners. Electric brake allows for precise setting of fasteners. Voltage: 36 V Batt. Type: Phosphate Lithium Ion Retainer Type: Detent Pin Speed: 1,400 rpm Cycle Rate: 2,500 ipm Torque: 325 ft lb Control Type: Rocker Switch Handle Type: Anti Slip Grip : 1 Hour Charger; (2) Lithium Ion Batteries; Heavy Duty Kit Box Drive Size Drive Type 115 DC800KL 1/2 in Square 2016 1.800.678.6577 525

M18 FUEL 7/16 Hex Utility Impacting Drills Superior performance maximum fastening torque, up to 2X more runtime and up to 3X longer motor life. POWERSTATE Brushless Motor runs cooler with no wearable components. REDLINK PLUS Intelligence allows the operator to choose between 2 fastening modes with Milwaukee s proprietary DRIVE CONTROL feature. REDLITHIUM XC 4.0 Battery Packs provides superior pack construction, electronics and performance to deliver 2X more runtime. Batt. Type: REDLITHIUM Control Type: Variable Speed Trigger Handle Type: Non Slip; Soft Grip : (1) M18 FUEL Utility Impacting Drill (2765 20); (2) M18 REDLITHIUM XC 4.0 Extended Capacity Battery Pack (48 11 1840); (1) M18 & M12 Multi Voltage Charger (48 59 1812); Carrying Case Drive Size Drive Type Torque Voltage 495 2765 22 7/16 in Hex 500 ft lb 18 V M18 FUEL High Torque Cordless Impact Wrenches Superior performance of maximum fastening and nut busting torque with up to 2X more runtime. POWERSTATE Brushless Motor runs cooler with no wearable components. REDLINK PLUS Intelligence allows the operator to choose between 2 fastening modes with Milwaukee s proprietary DRIVE CONTROL feature. REDLITHIUM XC 4.0 Battery Packs provides superior pack construction, electronics and performance to deliver 2X more runtime. Voltage: 18 V Retainer Type: Friction Ring Speed: 1,700 rpm Control Type: Variable Speed Trigger Handle Type: Non Slip; Soft Grip : M18 FUEL High Torque Impact Wrench; (2) M18 REDLITHIUM XC 4.0 Extended Capacity Battery Pack (48 11 1840); M18 & M12 Multi Voltage Charger (48 59 1812); Carrying Case Drive Size Drive Type Batt. Type Torque 495 2763 22 1/2 in Square Lithium ion 700 ft/lb 495 2764 22 3/4 in Square REDLITHIUM 750 ft lb M18 High Torque Impact Wrenches Battery fuel gauge. Compact and lightweight. Milwaukee 4 pole frameless motor. Powerful impact mechanism. Voltage: 18 V Speed: 1,900 rpm Control Type: Variable Speed Trigger Handle Type: Non Slip; Soft Grip Batt. Type: Lithium Ion Drive Size Drive Type Retainer Type 495 2662 20 1/2 in Square Detent Pin 495 2663 22 1/2 in Square Friction Ring 495 2663 20 1/2 in Square Friction Ring 495 2662 22 1/2 in Square Detent Pin Cycle Rate 2,200 ipm 2,200 ipm 2,200 ipm 0 2,200 ipm 495 2664 22 3/4 in Square Friction Ring 0 2,200 ipm Torque 450 ft lb Bare Tool 450 ft lb V28 Cordless Impact Wrenches (2) XC Batteries; 1 Hour Charger; Carrying Case 450 ft lb Bare Tool (2) XC Batteries; 1 Hour 450 ft lb Charger; Carrying Case (2) XC Batteries; 1 Hour 525 ft lb Charger; Carrying Case Reversible battery pack. Hanger bracket w/solid steel ring. Magnesium gear case for added durability and lighter weight. Batt. Type: Lithium Ion Retainer Type: Detent Pin Torque: 325 ft lb; 3,900 in lb Control Type: Variable Speed Trigger Handle Type: Non Slip; Soft Grip : (2) Batteries; 1 Hour Charger; Impact Resistant Carrying Case Drive Size Drive Type Voltage Speed 495 0779 22 1/2 in Square 28 V 1,450 rpm ORSNASCO.COM 526 2016

FINISHING TOOLS Engravers Knurled Nuts Replacement piece. Two holes, one on each side for spanner wrench. Compatible with a variety of DeWalt angle grinders. Engravers Stroke adjustment dial regulates engraving depth. Light and compact design for precision engraving. Engraves metal, glass, wood, plastic, and ceramics. Soft grip has been added to provide extra control and comfort. Voltage: 120 VAC Power Source: Electric Cycle Rate Frequency 114-290-05* 7,200 strokes/min 60 Hz 114-290-01 7,200 strokes/min 60 Hz * : (3) 9924 Carbide Engraving Points Grinders 115-636226-00 Type 1 Metal Thin Cut-Off Wheels Thin cut-off wheels with a.045 wheel design for fast, burr-free cutting. Proprietary aluminum oxide grain combination for agressive cutting action. Proprietary material mix ensures durable long life wheels. Uses two full sheets of fiberglass for durability and safety. Carbon Steel Brush Sturdy carbon brush is great for everyday usage. Fits a variety of DeWalt grinder products. Convenient brush works with most DeWalt grinders. Wire Material: Copper Type: Replacement Brush 115-650916-01 Dia. Speed Type 115-DW8062 4 1/2 in 13,300 rpm Grinding Wheel; Type 1 115-DW8851 4 1/2 in 13,300 rpm Cutting Wheel; Type 1 115-DW8725 6 in 10,000 rpm Grinding Wheel; Type 1 High-Performance Metal Grinding/Cutting Wheels High-performance grinding/cutting wheels employ a thin.045 wheel design for fast, burr-free cutting. Specially treated grain combination for aggressive cutting action. Proprietary material mix ensures durable long life wheels. Uses two full sheets of fiberglass for durability and safety. Speed: 13,300 rpm Type: Grinding Wheel; Type 27 115-DW8424 115-DW4514 Dia. 4 1/2 in 4 1/2 in Corded Small Angle Grinders Directed air flow diverts dust away from switch and vital components to extend tool life. Service Minder brushes eliminate guesswork, stops tool when preventative maintenance is required. Gear housing rotates 90 degrees for better ergonomics and control in cutting applications. Speed: 11,500 rpm Spindle Thread: 5/8 in - 11 UNC : Backing Flange; Lock Nut; Spanner Wrench; Guard Wheel Dia Amps Control Type 114-AG40-85P 4 1/2 in 8.5 A Paddle Switch 114-AG40-85 4 1/2 in 8.5 A Slide Switch 2016 1.800.678.6577 527

Large Angle Grinders Reinforced armature windings protects motor against abrasive dust and metal debris. Vibration control on side and main handles provides uncompromising user comfort for extended periods of work. Tool-free adjustment guard quick guard installation and adjustments. Service Minder brushes eliminates guesswork, stops the tool when preventive maintenance is required. Precision spiral bevel gears quality engineering and construction for smooth power transmission. Test & Approvals: Double Insulated; UL Listed; Complies to OSHA Control Type: Lock on/off switch : 3 Position Side Handle; 9 in. Guard; Spanner Wrench Wheel Dia Amps Speed Spindle Thread 114-1893-6 9 in 15 A 6,000 rpm 5/8 in - 11 4HP Large Angle Grinders Motor provides overload protection. Epoxy-coated motor. Low-profile gearcase. Automatic turn-off brushes. 2-position side handle. Watts: 3,000 W Spindle Thread: 5/8 in - 11 Small Angle Grinders Ergonomic slim grip adds comfort and convenience for all day use. Powerful motor provides the ability to grind various materials and applications with ease and speed. Directed air flow diverts dust away from vital components and extends tool s life. Removable brush covers allows easy and fast tool brush replacements. Reinforced wheel guard provides maximum safety to users under different work conditions. Lock-on side switch ideal for continuous operation all day long. Test & Approvals: Double Insulated; UL Listed; Complies to OSHA Speed: 11,000 rpm Control Type: Lock-On/Off Switch Wheel Spindle Amps Dia Thread 5/8 in - 11 114-1375A 4 1/2 in 6 A UNC 114-1380SLIM 4 1/2 in 7.5 A 5/8 in - 11 4.7HP Large Angle Grinders Motor provides overload protection. Dust Ejection System. Anti-Vibe trigger handle. Lightweight design. Automatic turn-off brushes. Watts: 3,450 W Spindle Thread: 5/8 in - 11 Guard; 2 Position Side Handle; Flange Kit; Spanner Wrench; Abrasive Wheel Abrasive Wheel; Auxiliary Handle; Flange Kit; Spanner Wrench; Wheel Guard Wheel Dia Amps Speed Control Type 115-DWE4557 7 in 15 A 8,500 rpm Lock-On; 7 Guard; 3 Position Trigger Side Handle 9 Guard; 3 Position 115-DWE4559N 9 in 15 A 6,500 rpm Trigger Side Handle Wheel Dia Amps Speed Control Type 7 Guard; 2 Position Side 115-DWE4517 7 in 15 A 8,500 rpm Trigger Handle Lock-On; 9 Guard; 2 Position Side 115-DWE4519 9 in 15 A 6,500 rpm Trigger Handle 5.3HP Large Angle Grinders Epoxy coated field and armature provide long service life against abrasion from airborne debris. Keyless adjustable guards allow for guard adjustments to be made without tools. Rotating rear handle provides improved ergonomics in cutting and grinding applications. Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage. Low profile gearcase allows for work in tight areas. 5 position side handle provides improved ergonomics for specific applications. 2 wire double insulated S jacket rubber cord provides increased durability and life in hot and cold climates. 6,000 rpm provides optimal material removal with 9 in grinding wheels. Motor provides overload protection. Watts: 3,950 W Speed: 6,000 rpm Control Type: Lock-On; Trigger Spindle Thread: 5/8 in - 11 : 5 Position Side Handle; 7 & 9 in. Guards; 7 & 9 Guard Wheel Dia Amps 115-D28499X 7 in; 9 in 15 A ORSNASCO.COM 528 2016

High Performance Angle Grinders Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents. Quick-Change Wheel Release allows tool free wheel removal. Dual abrasion protection provides increased motor protection. One-piece brush arm prevents brush hang-up due to dust ingestion. Vibration-reducing side handle. Low profile, jam-pot gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces. Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage. Keyless adjustable guard provides tool-free guard adjustment. Watts: 1,700 W Spindle Thread: 5/8 in - 11 : 2 Position Side Handle; Wrench Control Wheel Dia Amps Speed Type 115-D28115 4.5 in 13 A 9,000 rpm Trigger 5 Keyless Adjustable Guard 115-D28131 4.5 in 13 A 11,000 rpm Lock-On Depressed Center Wheel; Slide Switch Keyless Adjustable Guard Paddle 115-D28114 4.5 in 13 A 11,000 rpm 5 Keyless Adjustable Guard Switch Trigger; ;5. Keyless Adjustable 115-D28115N 4.5 in; 5 in 13 A 9,000 rpm No-Lock Guard 5 Keyless Adjustable Guard; 115-D28065 5 in; 6 in 13 A 9,000 rpm Trigger 6 Keyless Adjustable Guard No-Lock On Trigger Grip Paddle 115-D28114N 4.5 in; 5 in 13 A 11,000 rpm Switch;No 5 Keyless Adjustable Guard Lock No-Lock On Trigger Grip 5 Keyless Adjustable Guard; 115-D28065N 5 in; 6 in 13 A 9,000 rpm Trigger 6 Keyless Adjustable Guard High-Performance Cut-Off Tool/Angle Grinders Dual Clutch Protection prevents the gears from stripping and motor from burning up in a wheel pinch/stall increasing durability. Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents. Quick-Change Wheel Release allows tool free wheel removal. Dual abrasion protection provides increased motor protection. One-piece brush arm prevents brush hang-up due to dust ingestion. Vibration reducing 2-position side handle. Low profile, jam-pot gear case provides precise gear alignment. Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage. Keyless adjustable guard provides tool-free guard adjustments Watts: 1,700 W Speed: 9,000 rpm Spindle Thread: 5/8 in - 11 Wheel Amps Control Type Dia Paddle Switch; 2-Position Side Handle; 5 in Keyless 115-D28144N 6 in 13 A No Lock Adjustable Guard; Wrench 2-Position Side Handle; Type 1 Cutting 115-D28144 6 in 13 A Paddle Switch Wheel; Depressed Center Wheel;5 in Keyless Adjustable Guard; Wrench Medium Angle Grinders AC/DC capacity works off welding machines and generators for increased productivity and versatility. Rear handle design for greater comfort and control. External brush doors for easy servicing. Motor provides high speed for fast material removal. Sealed ball and roller bearings for extended motor life. High power-to-weight ratio for greater efficiency and reduced user fatigue. Control Type: Spindle Lock Spindle Thread: 5/8 in - 11 Wheel Dia 115-DW831 5 in 12 A 115-DW840 7 in 13 A Amps Watts Speed 1,837 W 2,250 W Small Angle Grinders 10,000 rpm 8,000 rpm Depressed Center Wheel; Wrench; Backing Flange; Clamp Nut; Tool-Free Guard; 2 Position Side Handle Depressed Center Wheel; Wrench; Backing Flange; Clamp Nut; Guard; 2 Position Side Handle Low profile gear case allows tool to fit into tight spaces. Quick-Change Wheel Release provides easier and quicker wheel removal without the need for a wrench. Designed for faster material removal and higher overload protection. Spindle Thread: 5/8 in - 11 115-DWE4011 Wheel Dia 4 1/2 in Amps Watts Speed 7 A 850 W 115-DWE4214 4.5 in 11 A 1,400 W 115-DWE402G 4.5 in 11 A 1,400 W 9 Amp 4 1/2 115-DWE4120 9 A 1,140 in W 9 Amp With No Lock-On 115-DWE4120N 4 1/2 in 11 Amp 4 1/2 115-DWE402 in 9 A 1,140 W 11 A 1,400 W 12,000 rpm 11,000 rpm 11,000 rpm 12,000 rpm 12,000 rpm 11,000 rpm 11 Amp with No Lock-On 115-DWE402N 4 1/2 11 A 1,400 11,000 in W rpm Control Type Slide Switch Paddle Slide Switch Lock-On; Paddle Switch Paddle Switch Lock-On; Paddle Switch Paddle Switch 2 Position Side Handle; Depressed Center Wheel; One-Touch Guard; Wrench One-Touch Guard; 2-Position Side Handle; Wrench; 3-Wire Grounding Plug One-Touch Guard; 2-Position Side Handle; Wrench One-Touch Guard; Hex Wrench One-Touch Guard; Hex Wrench One-Touch Guard; Hex Wrench One-Touch Guard; Hex Wrench 2016 1.800.678.6577 529

Disc Grinders Durable, powerful disc grinder that is suitable for the toughest jobs. Specially sealed armature coil reduces wear caused by ingested debris. Lightweight design allows easy maneuverability. Removable side handle adds control and comfort. Watts: 2,100 W Speed: 11,000 rpm Control Type: Paddle Spindle Thread: 5/8 in - 11 : Wrench; Side Handle Wheel Dia Amps 361-G12SE2 4 1/2 in 9.5 A 4 1/2 Angle Grinders Labyrinth construction seals motor and bearings from contamination. Powerful motor with protective zigzag varnish to keep dust and debris out. Super Joint System (SJS) technology helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to a stop. Speed: 10,000 rpm Control Type: Paddle; On/Off Spindle Thread: 5/8 in - 11 UNC Wheel Dia Amps 458-9557PBX1 4 1/2 in 7.5 A (5) Grinding Wheels; (1) Diamond Wheel; Side Handle (153489-2); Wheel Guard (125273-5); Lock Nut Wrench (782422-3); Lock Nut (193465-4); Inner Flange (224399-1); Aluminum Case 458-9557PB 4 1/2 in 7.5 A Grinding Wheel (741424-8-1); Lock Nut Wrench (782422-3); Lock Nut (193465-4); Side Handle (153489-2); Inner Flange (224399-1); Wheel Guard (125273-5) 5 Angle Grinders Lightweight for high production work with less fatigue. Side handle can be installed on either side of the tool. Spindle lock for easy wheel changes. All ball bearing construction for longer tool life. Lock-on button for continuous operation. Speed: 10,000 rpm Control Type: On/Off Spindle Thread: 5/8 in - 11 UNC : 5 in. Grinding wheel (741407-8); Side Handle (273480-5); Lock Nut (224509-0); Lock Nut Wrench (782412-6); Inner Flange (224178-7); Spindle Washer 0(261039-0); Wheel Guard (164556-8) Wheel Dia Amps 458-9005B 5 in 9 A 5 Angle Grinders with Built in SJS Built in SJS technology - mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop. Electric brake for maximum productivity. Tool-less wheel guard for more convenient adjustments. Spiral bevel gears for smoother rotations and a more efficient transfer of energy. Zig-zag varnish protects the armature coil from dust and debris for longer motor life. Labyrinth construction prevents debris from penetrating the motor, bearings and gears for longer tool life. Externally accessible brushes for greater serviceability. Speed: 11,000 rpm Control Type: Trigger Spindle Thread: 5/8 in - 11 UNC : Grinding Wheel (741407-8); Inner Flange (224399-1); Lock Nut (193465-4); Lock Nut Wrench (782424-9); Side Handle (153504-2); Tool-Less Guard (163474-7) Wheel Dia Amps 458-GA5020 5 in 10.5 A 6 Angle Grinders Gear housing can be rotated 90. Powerful motor with protective zig-zag varnish to keep dust and debris out. Speed: 10,000 rpm Control Type: Trigger Spindle Thread: 5/8 in - 11 UNC : Grinding Wheel (A-80846); Inner Flange (224361-6); Lock Nut (224658-4); Lock Nut Wrench (782424-9); Side Handle (153504-2); Wheel Guard (165488-2) Wheel Dia Amps 458-GA6010Z 6 in 10.5 A 7 in Angle Grinders Enlarged all ball bearing construction for longer tool life. Spiral bevel gears for smoother rotations and a more efficient transfer of energy. Zigzag varnish protects the armature coil from dust and debris for longer motor life. Speed: 6,000 rpm Control Type: On/Off Spindle Thread: 5/8 in - 11 UNC Wheel Dia Amps 458-GA7911 7 in 15 A Side Handle; Spindle Washer 458-GA7001L 7 in 15 A 7 in x 7/8 in x 1/4 in Grinding Wheel, 24 Grit, General Purpose Metal; 7 in Wheel Guard; Inner Flange; Lock Nut; Lock Nut Wrench; Side Handle; Spindle Washer ORSNASCO.COM 530 2016

6 Angle Grinders 6 Angle Grinder, featuring a 13.5 Amp, 1,550 Watt, 9,600 rpm LongLife motor. Ergonomically designed body, quickest wheel change system available, tool-free quick-positioning guard, anti-vibration side handle, and advanced designs to optimize air flow for cooler operation and extend longevity in harsh environments. S-Automatic Safety Slip Clutch helps to prevent kickback. Electronic features include speed stabilization, overload protection, power interruption protection and soft start. Speed: 9,600 rpm Wheel Dia Amps Watts 469-WEP15-150Q 6 in 13.5 A 1550 W 469-WE15-150Q 6 in 13.5 A 1550 W 469-WEPBA17-150Q 6 in 14.5 A 1,700 W 900 Watt 4 1/2 in Angle Grinders Control Type Paddle Switch, Non- Locking Sliding Switch w/ Lock Paddle Switch Spindle Thread 6 Type-27 Guard; 6 Type-1 Clip-On Cut-Off Guard; 5/8 in-11 Anti-Vibration Side Handle; Inner Flange, Quick Flange Nut 6 Type-27 Guard; Anti-Vibration 5/8 in-11 Side Handle; Inner Flange; Quick Flange Nut 5/8 in - 11 Non-locking Paddle 4.5 in Angle Grinder, featuring an 8.5 Amp, 900 Watt, AC/DC, 10,500 rpm LongLife motor. Ergonomically designed body, quickest wheel change system available, tool-free quick-positioning guard, and advanced designs to optimize air flow for cooler operation and extend longevity in harsh environments. S-Automatic Safety Slip Clutch helps to prevent kickback. Watts: 900 W Speed: 10,500 rpm Amps: 8.5A 469-W9-115Q Wheel Dia 4 1/2 in 469-WP9-115Q 4 1/2 in 469-W9-115 4 1/2 in Control Type Sliding Switch w/lock Paddle Swtich, Non-Locking Lock-on Slide Switch Spindle Thread M14 M14 4 1/2 in Type-27 Guard; Ergonomic Side Handle; Inner Support Flange; Quick Flange Nut 4 1/2 in Type-27 Guard; Ergonomic Side Handle; Inner Support Flange; Quick Flange Nut 4 1/2 in Type-27 guard; Ergonomic side handle; Inner support flange; Quick flange nut Marathon Medium Angle Grinders Metabo Marathon motor with patented dust protection for long service life. Swiveling main handle: High safety and better handling when cutting. Metabo VibraTech (MVT) side handle for vibration damping and protection of the user s health. Twist-proofed tool-free adjustable guard. Metabo safety switch prevents unintentional start. Auto-stop carbon brushes to protect the motor. Watts: 1,400 W Speed: 9,700 rpm Spindle Thread: 5/8 in - 11 : Guard; Inner support flange; Quick flange nut; Side handle Metabo VibraTech (MVT) Wheel Dia Amps 469-W14-150 6 in 12 A 4-1/2 & 5 Small Angle Grinder/Sanders More copper means more power. 24% larger bevel gear that gives more durability. 100% tool free even hubbed products. Advanced airflow design. Test & Approvals: Complies with OSHA and UL Requirements Speed: 11,000 rpm Spindle Thread: 5/8 in - 11 Wheel Dia Amps 495-6146-30 4 1/2 in 11 A 495-6146-31 4 1/2 in 11 A 495-6147-30 4 1/2 in 11 A 495-6147-31 4 1/2 in 11 A 495-6121-31A 5 in 11 A 495-6117-30 5 in 13 A Watts 1,400 W 1,400 W 1,400 W 1,400 W 1,400 W 2,100 W Control Type Paddle; Lock-On Contractor Bag; Type 27 Guard; Grinding Wheel; Side Handle; Spanner Wrench; Flanges Paddle; No-Lock Type 27 Guard; Side Handle; Spanner Wrench; Flanges Paddle; Type 27 Guard; Side Handle; Spanner Lock-On Wrench; Flanges Paddle; Type 27 Guard; Side Handle; Spanner No-Lock Wrench; Flanges Trigger Type 27 Guard; Side Handle; Spanner Wrench; Flanges Paddle; Type 27 Guard; Side Handle; Spanner Lock-On Wrench; Flanges 2016 1.800.678.6577 531

4-1/2 Small Angle Grinders/Sanders Debris baffles protect internal components by deflecting damaging debris out of the airflow at the intake vents. Burst resistant guard has positive detents that hold the guard in place. Test & Approvals: Complies with OSHA and UL Requirements Spindle Thread: 5/8 in - 11 Wheel Amps Watts Dia Speed Control Type 495-6130-33 4 1/2 in 7 A 750 11,000 Side Handle; Spanner Slide Switch W rpm Wrench; Type 27 Guard 495-6140-30 4 1/2 in 7.5 A Lock-On; Flanges; Side Handle; 825 10,000 X-Large Paddle Spanner Wrench; Type W rpm Switch 27 Guard 6 Grinders More copper means more power. 24% larger bevel gear that gives more durability. 100% tool free even hubbed products. Electronics with Overload Protection and electronic clutch. Advanced airflow design. Constant power technology. Anti-Vibration handle. Test & Approvals: Complies with OSHA and UL Requirements Watts: 2,100 W Speed: 9,000 rpm Spindle Thread: 5/8 in - 11 : Flanges; Side Handle; Spanner Wrench; Type 1 Guard Wheel Dia Amps Control Type 495-6161-30 6 in 13 A Lock-On; Paddle 495-6161-31 6 in 13 A Paddle; Trigger 7 /9 Large Angle Grinders Soft grip handle. Spiral bevel gears that decreases noise and reduces vibration. Tool free burst resistant guard. Test & Approvals: Complies with OSHA and UL Requirements Watts: 3,130 W Speed: 6,000 rpm Spindle Thread: 5/8 in - 11 : Flanges; Side Handle; Spanner Wrench; 7 & 9 in. Type 27 Guards Wheel Dia Amps Control Type 495-6088-30 7 in; 9 in 15 A Lock-On; Trigger 495-6088-31 7 in; 9 in 15 A Trigger 4-1/2 in Angle Grinders Ergonomic balance/soft grip handle. Heavy-duty metal gear housing for added durability. Tool-less guard adjustment quickly adjusts for increased versatility. Test & Approvals: Double Insulated; UL Listed; Complies to OSHA Speed: 11,000 rpm Spindle Thread: 5/8 in - 11 Wheel Dia Amps Watts Control Type 114-9295-01 4 1/2 in 6 A 720 W Lock-On/Off Switch 114-9296-01 4 1/2 in 7.5 A 1,100 W M18 FUEL 4-1/2 /5 Cordless Grinders No-Lock; Paddle Switch Abrasive Wheel; Auxiliary Handle; Flange Kit; Spanner Wrench; Wheel Guard Adjustable Guard; Flange Kit; Owners Manual; Wrench 100% tool free: Make all accessory changes and guard adjustments without a wrench for increased productivity. DURABILITY: Same metal housing & gearing system as legendary high performance corded grinders. POWERSTATE Brushless Motor: Delivers maximum power and up to 10X longer motor life. REDLINK PLUS Intelligence provides optimized performance, electronic clutch and overload protection using total system communication between tool, battery and charger. Batt. Type: REDLITHIUM Length: 18 1/2 in Control Type: Slide w/ Lock-On : (1) M18 FUEL 4 1/2 /5 Grinder; (2) M18 REDLITHIUM XC 4.0 Extended Capacity Battery Pack (48-11-1840); M18 & M12 Multi-Voltage Charger (48-59-1812); Flange Nut; Wheel Guard; Spanner Wrench; Carrying Case Voltage Spindle Thread 495-2781-22 18 V 5/8 in - 11 M18 Cordless Cut-Off/Grinders L-shaped debris baffles. Milwaukee 4 pole frameless motor. Overload protection. Tool-free burst resistant guard. Batt. Type: Lithium-Ion Control Type: Paddle : (2) XC Batteries; 1-Hour Charger; Contractor Bag; Side Handle; Spanner Wrench; Type 1 & 27 Guards; Type 1 Cut0ff Wheel Voltage Spindle Thread 495-2680-22 18 V 5/8 in - 11 ORSNASCO.COM 532 2016

Pedestals This portable grinder pedestal stand positions your machine right where you need it for the most efficient use. Features include a heavy duty cast iron construction and a big steel column to withstand heavy workplace abuse. Height: 32 7/8 in Used With: 6 in; 7 in.; 8 in.; 10 in 110-GA16 6 Industrial Grinders Length 15 3/4 in Built for rugged, heavy-duty grinding, industrial-grade, split-phase motor won t burn out even if repeatedly overloaded. Slim design of motor provides extra clearance for grinding odd-shaped pieces. Two-piece, adjustable tool rests permit vertical and horizontal adjustments - can be tilted for angle grinding. Test & Approvals: CSA; UL Listed; OSHA Arbor Diam: 1/2 in Speed: 3,600 rpm Power Cap.: 1/3 hp Phase: Single Voltage: 115 V Frequency: 60 Hz Cord Length: 8 ft : (1) 36 & 60 Grit Grinding Wheels; GA10 Eyeshields; Pressed Steel Tool Rests; Non-Exhaust Type Guards Wheel Diam Wheel Width 110-612 6 in 3/4 in 8 Industrial Grinders Two wheels. Wheel guards and tool rests are cast iron. Guards are exhaust type. Designed to comply with OSHA standards under normal usage. Test & Approvals: UL Listed; OSHA Arbor Diam: 3/4 in Speed: 3,600 rpm Power Cap.: 3/4 hp Phase: Single Voltage: 115 V; 230 V Frequency: 60 Hz Cord Length: 8 ft Applications: Grinding : (1) 36 & 60 Grit Grinding Wheels; Cast Iron Exhaust Type Guards; Cast Iron Tool Rests; GA11 Eyeshields Wheel Diam Wheel Width 110-8107W 8 in 1 in Bench Grinders 12 1/2 distance between wheels for longer and larger grinding applications. Adjustable tool resets. Industrial cast iron base and motor housing provide durability and prolong life. Precision-machined aluminum tool rests allow the user to accurately position work. Rear exhaust ports in wheel guards for smoother operation. Applications: Grinding; Deburring; Sharpening; Shaping; Polishing; Grading; Rust Removal : 36 Grit Wheel; 60 Grit Wheel; Eye Shields; Spark Deflectors; Tool Rests; Adjusting Wrench Wheel Diam Arbor Diam Speed Power Cap. 115-DW756 6 in 0.5 in 3,450 rpm 5/8 hp 115-DW758 8 in 0.625 in 3,600 rpm 3/4 hp Industrial Bench Grinders Dust collecting port. Totally enclosed pre-lubricated ball bearings. Rubber mounts prevent movement. Heavy-duty guarded toggle switch. Cast iron wheel guards and dust vents. Test & Approvals: UL Speed: 3,450 rpm Phase: Single Voltage: 115 VAC Frequency: 60 Hz Cord Length: 6 ft Wheel Wheel Arbor Power Diam Width Diam Cap. 825-577102 8 in 1 in 5/8 in 1 hp Grinder; Hardware 825-577103 10 in 1 in 1 in 1 1/2 hp Bench Grinder; Wheel Guards & Dust Vents; Spark Guards; Large Eye Shields; Adjustable Tool Rests; Grinding Wheels 2016 1.800.678.6577 533

1 1/2 in Die Grinders Motor provides high power and speed for all 1 1/2 in grinding applications. AC/DC capacity works off welding machines and generators for increased productivity and versatility. Precision 1/4 in collet securely holds all proper accessories (1/8 in reducing sleeve as optional accessory) Watts: 350 W Amps: 4.2 Amps Speed: 25,000 rpm : (2) Wrenches; Collet Collet Size Wheel Diam Control Type 115 DWE4887N 1/4 in 1 1/2 in Paddle; No Locking 115 DWE4887 1/4 in 1 1/2 in Paddle Switch with Lock On Button Die Grinders Motor provides high power and speed for 6 grinding applications. AC/DC capacity works off welding machines and generators for increased productivity and versatility. Rotating adjustable guard for greater visibility. External brush caps for easy servicing. Motor provides high power and speed for all 1 1/2 to 2 1/2 grinding applications. Watts: 2,250 W Amps: 13 Amps AC/DC Speed: 5,700 rpm Control Type: Trigger Switch : Wrench; Arbor Nuts; Flanges 115 DW882 Heavy-Duty Die Grinders Wheel Diam 6 in Motor provides high power and speed for all 1 1/2 to 2 1/2 grinding applications. AC/DC capacity works off welding machines and generators for increased productivity and versatility. Rotating adjustable guard for greater visibility. External brush caps for easy servicing. Watts: 485 W Amps: 5 Amps AC/DC Speed: 19,000 rpm Control Type: Trigger Switch Collet Size Wheel Diam 115 DW888 1/4 in 2 in (2) Wrenches; 1/4 in. Collet and 1/8 in. Reducing Sleeve 115 DW880 2 1/2 in (2) Wrenches; Arbor Nuts; Flanges Slide-Switch Die Grinders Vented exhaust to direct dust away from the tool and user. Zig Zag protective motor varnish for longer tool life. Amps: 3.5 Amps Speed: 25,000 rpm Control Type: Slide Switch : Collet Collet Size Wheel Diam 458 GD0601 1/4 in 1 1/2 in Die Grinders Heavy duty aluminum gear cases. Strong, lightweight, glass reinforced nylon motor housings and handles. High efficiency fans. Long life brush system. All ball and roller bearings. Test & Approvals: Complies with OSHA and UL Requirements Wheel Diam.: 2 in Collet Size Amps Speed Control Type 495 5194 1/8; 1/4 in 4.5 Amps 21,000 rpm Paddle 1/4 in. Collet; 11/16 in. Open End Wrench; 1/2 in. Open End Wrench 495 5192 1/8; 1/4 in 4.5 Amps 21,000 rpm Toggle 1/4 in. Collet; 11/16 in. Open End Wrench; 1/2 in. Open End Switch Wrench 1/4 in. Collet; 11/16 in. Open 495 5196 1/8; 1/4 in 11 Amps 14,500 rpm On/Off End Wrench; 1/2 in. Open End Wrench; 1 in. Open End Wrench Straight Grinders Long life brush system. Coated spindle housing for cool gripping surface. High impact resistant tool rest. Strong, lightweight, glass filled nylon handles. Aluminum gear case. Hardened helical cut alloy steel gears and shaft. Test & Approvals: Complies with OSHA and UL Requirements Voltage: 120 V Voltage Type: AC/DC Frequency: 60 Hz Control Type: On/Off Handle Type: Back Body Grip Wheel Diam. Arbor Diam Speed Amps Length 495 5211 3 in 3/8 in 14,500 rpm 11 A 21 in 495 5243 6 in 5/8 in 5,500 rpm 15 A 22 in ORSNASCO.COM 534 2016

Rotary Tools Sanders Heavy-Duty Cut-Off Wheels Made of a hard abrasive material that s used for slicing and cutting metal, including hardened steel. Makes it easy to cut bolts or screws, or make slots in rusted or stripped bolts and screws to allow for easy removal with a screwdriver. Cuts only along its edge. Speed: 30,000 rpm Type: Cut-Off Wheel Used With: Mandrel 402 : (20) Cut-Off Wheels Applicable Materials 114-420 Sheet Metal; Plastic; Thin Wood 3000 Series Rotary Tools Dependable product with replaceable motor brushes. Electronic feedback for consistent power at lower and mid-range speeds. High performance motor supports tough applications. Maximum comfort for improved control. Amps: 1.2 A Speed: 5,000 rpm - 32,000 rpm : (24) Assorted Accessories; Carrying Case; (1) Attachment Cord Length: 6 ft Control Type: Variable Speed Voltage 114-3000-1/24 120 VAC 4000 Series Rotary Tools 360 degree grip zone allows grip anywhere on tool. Dependable product with replaceable motor brushes. Electronic feedback for consistent power at lower and mid-range speeds. High performance motor supports tough applications. Amps: 1.6 A Speed: 5,000 rpm - 35,000 rpm Cord Length: 6 ft Control Type: Variable Speed Handle Type: Body Grip Voltage Frequency 114-4000-2/30 120 VAC 60 Hz Carrying Case; (30) Assorted Accessories; Planer 114-4000-6/50 120 VAC 60 Hz Carrying Case; Circle Cutter Attachment; Cutting Guide; Flex Shaft; Planer; (50) Assorted Accessories; Detailers Grip Attachment; Sanding/ Grinding Attachment Electric Dynafile II Abrasive Belt Sanders Utilizes coated abrasive and non-woven nylon belts. For deburring, grinding, blending, finishing and surface prepping. Suitable for metal, plastic, fiberglass, stone and glass applications. Reversible side handle. Amps: 6 A Voltage: 120 V Control Type: Lock-On Switch Handle Type: Side Belt Length Belt Width 415-40610 18 in - 24 in 1/4 in - 3/4 in Rubber Backing Pads High quality raw materials for consistent performance. Steel reinforced. Speed: 12,000 rpm Material: Phenolic 115-DW4945 Polypropylene Pad Kits Lightweight. allows versatility for grinders. For Model: 6140-6 Speed: 13,000 rpm Material: Polypropylene Dia. 4 1/2 in Dia. Thread-TPI or Pitch 495-49-36-3455 4 1/2 in 5/8 in - 11 2016 1.800.678.6577 535

HAMMER DRILLING & DEMOLITION TOOLS Rotary Hammers Hammer Drills Carbide Hammer Drill Bit Sets Innovative tip configuration reduces walking for improved accuracy. Improved carbide tip provides up to 2X longer life. Optimum grade of carbide provides maximum durability. Unique flute design efficiently removes dust reducing bit binding. Cutting Diam: 3/16 in;1/4 in;5/16 in;3/8 in;1/2 in Bit Length: 2 in; 4 in Shank Type: 3-Flat Shank Diam: 3/8 in Finish: Silver Applicable Material: Masonry Width: 6.63 in Height: 7.75 in Type 3/16 x 3 in. Carbide Hammer Drill Bit; 1/4 x 4 in. Carbide Hammer Drill Bit; 1/4 x 6 in. Carbide Hammer Drill Bit; 5/16 x 6 115-DW5207 Percussion in. Carbide Hammer Drill Bit; 3/8 x 6 in. Carbide Hammer Drill Bit; 1/2 x 6 in. Carbide Hammer Drill Bit SDS Plus Hex Bit Kits Carbide tip design maximizes carbide surface contact for longer bit life. Hex shank interlocks with drive sleeve, allowing for quick change from drilling to driving. Drivers automatically disengage when screw is seated to prevent overdriving. Cutting Diam: 5/32 in; 3/16 in Bit Length: 7 in Overall Length: 7 in Shank Type: Hex Shank Diam: 5/32 in; 3/16 in Finish: Carbide Tipped Applicable Material: Concrete; Masonry Width: 5/32 in; 3/16 in Height: 7 in Type 115-DW5366 SDS Hex Bit Kit 5/32 in x 4 in x 7 in, 3/16 in x 4 in x 7 in ; Drive Sleeve; Percussion Bit Holder; Insert Bit Adapter; #2 & #3 Insert Bits; 1/4 in & 5/16 in Nutsetter; Hex Key; Medium tough CASE Bulldog SDS-plus Rotary Hammers Tool free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate. 2-Mode Selector - Easily converts from rotary hammer to rotation only. SDS-plus bit system. Speed: 0 rpm - 1,300 rpm Cycle Rate: 0 blows/min - 5,800 blows/min Impact: 2.2 ft lb Cutting Cap.: 1 in (concrete); 1/2 in (steel); 1 in (wood) Amps: 7.2 A Voltage: 120 VAC Control Type: Variable Speed; Reversing Trigger Handle Type: D-Handle; Side Handle : 360 Auxiliary Handle; Depth Gauge; Carrying Case Drive Size Drive Type 114-11255VSR 1 in SDS Plus M18 FUEL 1/2 in Hammer Drill/Driver Kit REDLINK PLUS Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. Multi-voltage charger, so you can charge all M12 and M18 batteries with one charger. REDLINK PLUS Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. Batt. Type: Lithium-ion Speed: 0 rpm - 1,850 rpm Cycle Rate: 31,450 blows/min Length: 8.100 in : Multi-Voltage Charger; 2 Batteries Voltage 495-2604-22 18 V ORSNASCO.COM 536 2016

Ecoheat Heat Guns HEATING TOOLS Heat Guns & Torches Resettable thermostat Protects element against over heating. Built in hand guard. 3 wire grounded cord set A positive grounding system for user safety. Built in stand. Use to bend and form plastics, dry body fillers, remove decals, spot dry paint, shrink tubing, packaging and more. Test & Approvals: UL Listed; cul Listed Amps: 10 A Fan Speed: Dual Outlet Size: 1 in Cord Length: 6 ft Control Type: Switch (3 Pos Off/On/On) Handle Type: Pistol Grip Operating Temp. Velocity Voltage Frequency 467 EC 100 1,000 F 1,020 ft/min 120 VAC 50 Hz; 60 Hz Master Heat Guns Powerful high speed universal motor. Sturdy die cast housing. Adjustable non slip stand. Use to bend plastics, cure adhesives, dry parts, heat parts, shrink tubing and packaging, strip paint and more. Test & Approvals: UL Listed; cul Listed Velocity: 3,000 ft/min Voltage: 120 VAC Frequency: 60 Hz Fan Speed: Single Outlet Size: 1 in Cord Length: 6 ft Control Type: Variable Temperature; Switch (3 Pos Off/On/Heat) Handle Type: Pistol Grip Operating Temp. Flow Amps Watts Wt. 467 HG 301A 500 F 23 CFM 12 A 1,440 W 4.55 lb 467 HG 501A 750 F 23 CFM 14 A 1,680 W 4.80 lb 467 HG 751B 1,000 F 23 CFM 14.50 A 1,740 W 4.65 lb Varitemp Heat Guns Adjustable non slip stand. Lockable variable temperature control allows you to dial in any temperature from ambient to 1000 F/540 C, and lock it in. Powerful high speed universal motor. Sturdy die cast housing. Use to activate adhesives, defrost frozen coils, heat sensitive material, melt solder, soften plastics and more. Test & Approvals: UL Listed Velocity: 3,000 ft/min Fan Speed: Single Outlet Size: 1 in Cord Length: 6 ft Control Type: Switch (3 Pos Off/On/Heat); Variable Temperature Operating Temp. Flow Voltage Frequency Amps Watts 467 VT 752C 750 F 23 CFM 220 VAC 50 Hz 7 A 1,680 W 467 VT 750C 1,000 F 23 CFM 120 VAC 60 Hz 14.5 A 1,740 W Milwaukee Heat Guns Impact resistant heating element. Soft air velocity: Reaches required working surface temperature faster then conventional heat guns. Maintains temperature for fast completion of work. Cool air inlet design. Support stand. Test & Approvals: Complies with OSHA and UL Requirements Voltage: 120 VAC Frequency: 60 Hz Amps: 11.6 A Operating Temp. Flow Control Type 495 8975 6 570; 1,000 F 14.8 CFM On/Off 2 Temperatures; On/Off Speed 495 8977 20 100 1,040 F 14.8 CFM On/Off 2 Temperatures Foamtips Swabs Soldering Irons Constructed from medical grade foam which features the best open cell structure, providing excellent particle entrapment characteristics. The foam is thermally bonded to the swab handle without using adhesives. These swabs are ideal for general cleaning applications. 471 CF2050 2016 1.800.678.6577 537

Ultrajet 70 Duster Ozone safe, CFC/HCFC free. Safe for most plastics. Nonflammable. 10-oz aerosol duster removes dry contaminants without residue. Safe on plastics, nonflammable, and CFC/HCFC-free. 471-ES1015 Butane Refill Canisters Contains no CFC s. Non-clogging formula. Special vapor pressure promotes consistent ignition. Triple refined to burn cleaner, prolonging the life of the tool. Used With: All Master Appliance Butane-Powered Tools Capacity Vol.: 5 1/8 oz 467-51773-24 Ultratorches Built-in fuel filter for consistent fuel ignition. Built-in window indicates fuel level. Dual function soldering iron and heat tool. Use to pinpoint heat, remove surface mount components, repair vinyl, shrink heat shrinkable tubing, solder & desolder, spot dry, strip insulation with hot knife and more. Convenient On/Off gas control and adjustable temperature control. Durable tank has built-in fuel filter. Copper-based tips provide long life and high thermal conductivity, excellent with lead-free solder. Test & Approvals: UL Listed Gas Type: Butane Output Power: 80 W Run Time: 120 min : Steel Case; Shrink Attachment; Sponge; Open End Wrench; Ejector; Ultratip Soldering Tip; 3W772; Soldering and Hot Air Tips; Shrink Attachment and Metal Case Body Material: Metal Length: 10.3 in Operating Temp. Capacity Vol. 467-UT-100SIK 482 F - 1,202 F 0.20 oz Soldering Iron Handle Durable, balanced handle features cool, soft touch acid and flux-resistant grips. Accommodates the full range of Weller heaters and integral heater tips. For Model: Weller SL325, SL335, SL345, SL500 Modular Soldering Irons Type: Two-Wire Soldering Handle 185-7760 MT-51 Series Microtorch May be hand-held or used hands-free on table top, per its wide, stable base. Built-in, self-igniting system with safety lock that ensures the switch is not turned on when not in use. Built-in refillable plastic fuel tank. Test & Approvals: Meets CPSC Requirements; CSA; TUV/GS : Built in Refillable Fuel Tank; Hands Free Lock Operating Temp. Gas Type Run Time Length Body Material 467-MT-51 2,500 F Butane 2 h 3 in Plastic Pyropen Professional Self-igniting Cordless Butane Soldering Irons Ignites with a push of a button. Lightweight and completely portable. Ready to use in 30 seconds. Sturdy metal tank holds enough gas for 3 hours of operation. Does not require cords, batteries or cartridges. Ignites with the push of a button, ideal for field service jobs. 14 soldering tip combinations available. Inactive hot air nozzles (1202 F) are available. Refills with butane fuel - Weller Cat.no. WB1 or WB2. Test & Approvals: UL Listed Operating Temp. 185-WPA2 482 F - 932 F ORSNASCO.COM 538 2016

MULTI-PURPOSE Combo Kits Cordless Super-Pro Self-Igniting Butane Soldering Iron Kits Self igniting portable butane heat tool professional quality. Features Auto Switch safety shut off, iron plated tips and built in butane filter. Butane fuel level is visible through a window on the body of the tool. Operates up to 2 hours per refill. Refills with butane fuel Weller no.wb1 or WB2. For such uses as anti static soldering, heat shrink and cutting rope. Rugged stainless steel body provides up to 125 watts of power. Adjustable temperature up to 1,076 F. Contains: iron, sponge, stand and extra tips packed in a plastic case. : Plastic Case; Stand; Sponge; Soldering Iron; Tips Body Material: Stainless Steel Operating Temp. 185 PSI100K 1,076 F 18V XRP Two Tool Combo Kit Kit includes two tough tools to get more done. Reciprocating saw has keyless blade clamp that allows for quick blade change without touching blade or reciprocating shaft. Variable speed with trigger lock for more precise cutting. Hammerdrill has patented three speed all metal transmission and heavy duty metal ratcheting chuck. LED worklight improves visibility in tight spaces. charger, two batteries and 360 side handle. Batt. Cap.: 2.4 A h : XRP 18V batteries, one hour universal charger, 360 side handle and carrying bag Voltage Batt. Type 115 DCK251X 18 V Ni Cad Soldering Stations Analog Soldering Stations New receptacle for easier iron replacement. Designed for continuous production soldering. Slim, comfortable pencil, with ETA tip, reduces operator fatigue. Tip temperature offset capability allows user to reset station temperature to match in tip sizes & styles. Iron is fitted with a non burnable silicon rubber cord for safety. ESD safe to protect sensitive components. For continuous production soldering. Innovative heater/sensor combination provides rapid heatup and temp recovery. Uses Weller ET series soldering tips. Test & Approvals: cul Listed; UL Listed Voltage: 120 V Voltage Output: 24 V : Sponge; WES51PU Power Unit; PES51 Soldering Pencil; PH50 Stand Operating Temp. Watts 185 WES51 350 F 850 F 50 W 20V MAX* Cordless Combo Kits We constantly improve the battery and the tool, because the battery alone can t give you what you need. With a complete range of heavy duty cordless solutions, you have what you need for any type of job on the site. Voltage Batt. Type Batt. Cap. 115 DCK280C2 20 V Lithium Ion 1.5 A h DCD780 1/2 Drill/Driver; DCF885 1/4 Impact Driver; (2) 20V MAX* Lithium Ion 1.5 Ah Battery Packs; Fast Charger; (2) Belt Hooks; Bit Holder; Kit Box 115 DCK290L2 20 V Lithium Ion 3 A h 1/2 in Compact Drill; 1/4 in Impact Driver; 2 20 V 3.0aph Battery; Fast Charger; Belt Hook; Contractor Bag; 360 Degree Side Handle 20V MAX* Lithium Ion Compact Drill/Driver Kits High performance motor delivers 300 unit watts out (UWO) of power ability for completing a wide range of applications. Compact, lightweight design fits into tight areas. Ergonomic handle delivers comfort and control. Batt. Cap.: 1.5 Ah : DCD771 1/2 in Drill Driver; (2) 20V Max* Compact Lithium Ion Batteries; Compact Charger; Contractor Bag Voltage Batt. Type 115 DCD771C2 20 V Lithium Ion 2016 1.800.678.6577 539

20V MAX* Lithium Ion Grinder Tool Kits Provides high-power for cutting and grinding applications. Quick-Change Wheel Release allows for tool-free wheel changes without the need for a wrench. Tool-free guard allows for quick and easy guard adjustments/positioning. 2-finger trigger switch (w/ lock-off button) allows for convenient activation and easier gripping. 2-position side handle offers greater control, comfort and versatility. Batt. Cap.: 5 A-h : DCG412 Grinder; (2) DCB205 20V MAX* XR Premium Li-Ion Battery; Fast Charger; Spanner Wrench; 5 inch Type 27 Grinding Guard; 2-Position Side Handle; Contractor Bag Voltage Batt. Type 115-DCG412P2 20 V Lithium-Ion LXT Brushless Cordless Combo Kits Electronically controlled to optimize battery energy use for up to 50% longer run time per charge. Eliminates carbon brushes, which enables the BL Motor to run cooler and more efficiently for longer life. Efficiently uses energy to match torque and RPM to the changing demands of the application. : Brushless Hammer Driver-Drill - XPH06Z; Brushless Impact Driver - XDT08Z; (2) 18V LXT Battery - BL1830; Rapid Optimum Charger - DC18RC Voltage Batt. Type Batt. Cap. 458-XT248 18 V Lithium-Ion 3 A-h Hex Impact Driver Kit Four-Pole Frameless Motor features a robust design for longer life, more power and more runtime than any brushed competitor. Milwaukee designed Impact Mechanism delivers maximum power and application speed for greater efficiency on the job. REDLINK Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. DRIVE CONTROL techology provides two speed/torque modes, allowing class-leading control for greater application versatility. The Hex Impact Driver features an LED Light to illuminate work surfaces, and includes an all-metal, reversible belt clip for temporary tool storage. : (1) M18 2-Speed 1/4 Hex Impact Driver (2657-20); (2) M18 REDLITHIUM XC Extended Capacity Battery (48-11-1828); (1) M18 & M12 Multi-Voltage Charger (48-59-1812); (1) Belt Clip; (1) Carrying Case Voltage Batt. Type Batt. Cap. 495-2657-22 18 V RedLithium 3 A-h M18 Cordless Combo Kits Durability, performance and innovation. Reliable. Voltage Batt. Type Batt. Cap. 495-2691-22 18 V Lithium-Ion 1.5 A-h 495-2697-22 18 V Lithium-Ion 3 A-h M18 Cordless Compact Hammer Drill/Driver Kit (2) M18 RED LITHIUM Compact Battery Packs; 1-Hour Charger; Hard Carrying Case; M18 Compact Drill/Driver; M18 Compact Impact M18 Hammer Drill/Driver; M18 Compact Impact; (2) XC Batteries; 1-Hour Charger; Contractor Bag Milwaukee 4-Pole Frameless Motor: Features a robust design with rare-earth magnets. Compact Design: Allows greater accessibility in tight work spaces. All-Metal Gear Case and Chuck: Provide maximum impact and shock durability. REDLINK Intelligence: Advanced overload protects the tool against abusive situations and provides maximum life. Batt. Cap.: 3 A-h : (2) M18 REDLITHIUM XC Extended Capacity Batteries; (1) M18 & M12 Multi-Voltage Charger; (1) Carrying Case Voltage Batt. Type 495-2607-22 18 V Lithium-Ion M28 Cordless Grinder/Cut-Off Tool Kit Overload protection for preventing over-heating. Soft start reduces start-up torque and improves gear life. Large spindle lock for quick wheel replacement. Tool free guard provides easy guard adjustment. Slide on switch reduces user fatigue. Fuel gauge indicates remaining run time. Batt. Cap.: 3 A-h : (1) M28 Cordless LITHIUM-ION Grinder / Cut-Off Tool (0725-20); (1) M28 REDLITHIUM Battery Pack (48-11-2830); (1) Contractor Bag (48-55-3490); (1) 28-Volt Charger (48-59-2819); (1) Cut-Off Wheel (Type 1) (49-94-4500); (1) Grinding Wheel (Type 27) (49-94-4520) Voltage Batt. Type 495-0725-21 28 DC Lithium-Ion ORSNASCO.COM 540 2016