SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ZF GLOBAL ELECTRONICS CZESTOCHOWA ENGINEERING CENTER VALIDATION LABORATORY 1 Branch Laboratory ul. Pulaskiego 78 Czestochowa, Poland PL-42-200 Pawel Kantor, Ms.Eng. (Authorized Representative) Phone: +48-34-347-5151 Email: Pawel.Kantor@ZF.com Lukasz Organa, Ms.Eng. (Deputy Authorized Representative) Phone: +48-34-347-5152 Email: lukasz.organa@zf.com This laboratory is a branch of the ZF GLOBAL ELECTRONICS Headquarters Laboratory located at 24175 Research Drive, Farmington Hills, MI 48335 USA Dr. Alex Simonov (Authorized Representative) Phone: 248-699-4269 Email: Alex.Simonov@ZF.COM ELECTRICAL Valid to: October 31, 2019 Certificate Number: 1358.03 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to the laboratory listed above, and the satellite laboratory listed below, to perform the following automotive tests: Test Technology: Test Method(s) 2 : Conducted Immunity on Power Lines Supply Voltage Transients ISO 7637-2; VW80000; BMW GS95002-1; BMW GS95002-2; Fiat 9.90111/ 02; Honda 7794Z-S3V-0000; Nissan 28401NDS02 (A2LA Cert. No. 1358.03) 11/20/2017 Page 1 of 5
Test Technology: Test Method(s) 2 : Conducted Immunity on Signal Lines ISO 7637-3 (excluding clause 4.6); Fiat 9.90111 01; Nissan 28401NDS02 Conducted Transient Emissions ISO/IEC 7637-2; Ford EMC-CS-2009.1; Fiat 9.90111 01; Nissan 28401NDS02 Immunity to Voltage Fluctuations, Disturbances of The Supply Voltage Lines ISO 16750-2; DC-10615; ES 95400-10; Honda 7794Z_S3V_0000; Fiat 9.90111/ 02; BMW GS95003-2; VW/Audi/Porsche VW80101; VW80000; PSA B21 7110 (A2LA Cert. No. 1358.03) 11/20/2017 Page 2 of 5
Test Technology: Test Method(s) 2 : Over/Under, Reverse, Jump Start, Defective Regulator Voltages, Electrical Stress ISO 16750-2; DC-10615; ES 95400-10; Daimler MBN LV 124-1; Fiat 9.90111 01; VW/Audi/Porsche VW80101; VW80000; PSA B21 7110 ; BMW GS95003-2; Honda 7794Z_S3V_0000 GND Shift ISO 16750-2 (clause 4.8); BMW GS95003-2; VW/Audi/Porsche VW 80000; Daimler MBN LV 124-1 CAN Physical Layer Test ISO 11898-2; GME 6718GS; BMW LH_CAN_Teil4_10000453; Renault 36 02 026; Fiat 7.Z0146; Ford 302PLDev; ES90700-00; GMW 14241 1 Accreditation is granted to this laboratory at the location listed above as well as the satellite laboratory location listed below (A2LA Cert. No. 1358.03) 11/20/2017 Page 3 of 5
ZF GLOBAL ELECTRONICS CZESTOCHOWA ENGINEERING CENTER VALIDATION LABORATORY Branch Laboratory ul. Legionow 176 Czestochowa, Poland PL-42-200 Pawel Kantor, Ms.Eng. (Authorized Representative) Phone: +48-34-347-5151 Email: Pawel.Kantor@ZF.com Lukasz Organa, Ms.Eng. (Deputy Authorized Representative, Electrical) Phone: +48-34-347-5152 Email: lukasz.organa@zf.com Karol Dusilo, Eng. (Deputy Authorized Representative, Mechanical) Phone: +48-34-347-5165 Email: Karol.Dusilo@ZF.com Test Technology: Test Method(s) 2 : Temperature/Humidity (-75 to 180) C +/- 1.5 C +RH 10% - 98% Thermal Shock (-70 to 200) C +/- 0.5 C DIN-EN-IEC 60068-2-14; BMW GS95024-3-1; BMW GS95024-3-2; VAG VW80000; Daimler MBN LV124-2; Renault 36-00-802/--K; PSA B21 7130 B 2012; Ford ES-AV61-3200-CA; ES 9E5C 3200 AA; ISO 16750-4; IEC 60068-2-30; IEC 60068-2-38; IEC 60068-2-78; IEC 60068-2-1; IEC 60068-2-2 IEC 60068-2-14; PF-9688; PF-8982; CS-11982; DC-10611; ES-DG9T-14B522-AB; ES-5F9T-14A626-AA; ES-BT4T-13D061-AA; GM 9110P; TSC7000G; 7794Z_S3V_0000; 7794Z_TR0A_0000; 7794Z_TR0_A011_M1; 9.90110; ES 95400-10; ES95910-93; Daimler MBN LV124-2; VAG VW80000; BMW GS 95024-3-1; Renault 36-00-802/--K; Ford ES-AV61-3200-CA; ES 9E5C 3200 AA; ISO 16750-4 (A2LA Cert. No. 1358.03) 11/20/2017 Page 4 of 5
Test Technology: Test Method(s) 2 : Electrostatic Discharge ISO 10605 (2001, 2008); Fiat 9.90111/01; Ford EMC-CS-2009.1; Honda 7794Z-S3V-0000 Bulk Current Injection (BCI) (Closed Loop, Substitution) ISO/IEC 11452-4; Ford EMC-CS-2009.1; Fiat 9.90111/ 02; Renault 36-00-808/--L; Renault 36-00-808/--M; BMW GS95002 2 When the date, revision or edition of a test method standard is not identified on the scope of accreditation, the laboratory is expected to be using the current version within one year of the date of publication, per part C., Section 1 of A2LA R101 - General Requirements - Accreditation of ISO-IEC 17025 Laboratories. (A2LA Cert. No. 1358.03) 11/20/2017 Page 5 of 5
Accredited Laboratory A2LA has accredited ZF GLOBAL ELECTRONICS - CZESTOCHOWA ENGINEERING CENTER - VALIDATION LABORATORY Czestochowa, Poland for technical competence in the field of Electrical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 20 th day of November 2017. President and CEO For the Accreditation Council Certificate Number 1358.03 Valid to October 31, 2019 For the tests to which this accreditation applies, please refer to the laboratory s Electrical Scope of Accreditation.