Product Data. Features/Benefits

Product Data GEMINI SELECT 3APS5-5, 3APD5-13 Commercial Air-Cooled Condensing Units with PURON Refrigerant (R-A) / Hz 5 to 13 Nominal Tons ( to 57 Nominal ) A3-797 - UNIT a3-79 5 UNIT WITH LOW SOUND OPTION 7 UNIT A3-795 These dependable split systems match Carrier's RU or 39 Series indoor-air handlers with the versatile outdoor 3AP condensing units for a wide selection of commercial cooling solutions. Split condensing units compatible with ASHRAE 9.1 Chlorine-free, non-ozone depleting Puron refrigerant (R-A) Condenser coils feature the Novation heat exchanger with microchannel coil technology 3APS single-circuit unit has up to 3 rotary scroll compressors 3APD unit has up to rotary scroll compressors with independent circuits Standard scroll compressor units operate as low as 33% (single circuit) or 13% (dual circuit) of nominal capacity Optional digital scroll compressors allow incremental unloading down to 1% (single circuit) or % (dual circuit) of nominal capacity for VAV applications. The digital scroll is always on the lead circuit (one per unit). Protection against high discharge and low suction refrigerant pressure, and low oil pressure Features/Benefits The 3AP condensing unit offers the utmost in system configuration and control adaptability. Its premiumquality standard components ensure durable, efficient, and reliable operation. The 3AP units offer high unit EERs (Energy Efficiency Ratios) up to 11.5 and IPLVs (integrated part load values) up to 1.. Copyright 1 Carrier Corporation Form 3AP-11PD

Features/Benefits (cont) These units provide greater efficiency than similar units in the marketplace, which translates into year-round operating savings. The latest safety standards for 3AP units are certified to UL (Underwriters Laboratories) and CSA (Canadian Standards Association) standards, ETL approved. Versatility The 3AP Series condensing units feature up to compressors and refrigerant circuits, and can be matched with a wide variety of air-handling units. Single circuit condensing units can operate with a single air handler. Dual circuit condensing units can operate with a single air handler or two separate air handlers. Standard units have multiple scroll compressors. A digital scroll option is available. This option of digital control closely matches building loads and allows fine incremental adjustments to the variance in load. Durable construction All 3AP units have weatherized cabinets constructed of heavy-duty galvanized steel prepainted with corrosion-resistant baked enamel. Inside and outside surfaces are protected to ensure long life and good appearance. The durable, galvanized steel, prepainted components exceed the requirements of the -hour salt spray test per ASTM (American Society for Testing and Materials) B117. All 3AP units have Novation heat exchangers with microchannel coil technology. The microchannel heat exchanger (MCHX) coils provide long-term reliability, high performance heat transfer, and significant savings in refrigerant charge. E-coated MCHX is offered as an option for harsh industrial or coastal conditions. Reliability The 3AP condensing units feature highly reliable, hermetic scroll compressors. Each 3AP unit is capable of unloading in staging sequence of scroll compressors. Compressors are mounted on rails with vibration isolators to provide quiet operation and reduced component stress. The 3AP units have single or dual independent circuits; they provide inherent backup capability. Each circuit is also protected by the following safety features: Short-cycle protection Low superheat protection Loss of refrigerant charge protection Reverse rotation protection Suction and discharge pressure transducers High refrigerant pressure switch (discharge) Circuit breakers or fuses for short circuit protection of compressors and outdoor fans Suction line accumulator for each refrigerant circuit Easier installation and service The 3AP units are equipped with hinged control-box access doors, control interface terminal boards, liquid line shutoff valves, and suction line service valves. ComfortLink controls The ComfortLink controls communicate in plain English, making it as easy as possible to monitor and control each Gemini Select condensing unit while accurately maintaining air temperatures. The large scrolling marquee display acts as a window into the unit's operation, providing easy-to-read information about chiller performance and over 15 diagnostic functions. Carrier s 3 Series condensing units' ComfortLink controls provide features such as supply air temperature reset, demand limit, to ma input compressor wear minimization and protection, temperature and pressure displays and diagnostic functions. These controls result in higher chiller reliability, simplified training and more productive service calls with correspondingly lower operational and maintenance costs. Carrier's exclusive accessory handheld Navigator display provides convenience and powerful information in the palm of your hand. The Navigator display helps technicians to quickly diagnose problems and even prevent them from occurring. All AquaSnap units are ready to be used with the Carrier Comfort Network (CCN) system. A BACnet* communication option is also available for the i-vu Open control system or a BACnet building automation system. Table of contents Page Features/Benefits...........................................1-3 Model Number Nomenclature................................... Capacity Ratings............................................ 5 Physical Data..............................................-9 Options and Accessories....................................,11 Dimensions.............................................1-1 Selection Procedure......................................... 17 Performance Data........................................1-71 Typical Piping and Wiring..................................7-7 Electrical Data...........................................75-7 Controls...............................................79-1 Typical Control Wiring Schematics.............................-9 Application Data.........................................91-95 Guide Specifications......................................9-9 *Sponsored by ASHRAE (American Society of Heating, Refrigerating and Air Conditioning Engineers).

Run Status Service Test Pressures Setpoints Inputs Outputs Time Clock Alarms ENTER ComfortLink AEROACOUSTIC FAN vs. PROPELLER FAN MODE Run Status Service Test Temperature Pressures Setpoints Inputs Outputs Configuration Time Clock Operating Modes Alarms Alarm Status ESCAPE ENTER a3-17 SCROLLING MARQUEE DISPLAY SOUND POWER [db(a)] 9 5 75 7 5 55 PENETRATES BUILDING STRUCTURE 5 3 13 1 3 3 1/3 OCTAVE BAND CENTER FREQUENCY (Hz) AEROACOUSTIC FAN a3-31 PROPELLER FAN AEROACOUSTIC FAN VS PROPELLER FAN MODE Alarm Status Temperatures Configuration Operating Modes ESC a3-39 a3-39 LOW-NOISE AEROACOUSTIC FAN NAVIGATOR DISPLAY a3-79 TUBES FINS MANIFOLD LOW SOUND OPTION MICROCHANNELS NOVATION HEAT EXCHANGER TECHNOLOGY WITH MICROCHANNEL CONDENSER COILS 3

Model number nomenclature 3AP D 5 A 1 3AP Split System Condensing Unit Refrigeration Circuit Options* D Dual Refrigeration Circuit S Single Refrigeration Circuit Unit Size 5 7 5 115 3 7 13 9 Power Supply 1 575-3- 3-3- 5 /3-3- -3-9 3/15-3- Condenser Coil/Low Sound Options MCHX, No Sound Treatment 5 E-coat, MCHX, No Sound Treatment C MCHX, Low Sound Fan(s) D E-coat MCHX, Low Sound Fan(s) H MCHX, Low Sound Fan(s), Compressor Blankets J E-coat MCHX, Low Sound Fan(s), Compressor Blankets Revision Level A Current Revision Level EMM Energy Management Module MCHX Microchannel Heat Exchanger XL Across-the-Line Start *3APS units available in sizes 5- and 5 only. Digital compressor not available on size 5. **Only available on sizes 115 and 13. Quality Assurance Certified to ISO 91 Packaging/Security Options Std Packaging Security Grilles/Hail Guards Std Packaging, Bottom Skid D Bottom Skid, Security Grilles/Hail Guards J Bottom Skid, Top Crate, Bag N Bottom Skid, Top Crate, Bag, Security Grilles/Hail Guards Controls/Communications Options Standard, Scrolling Marquee 3 EMM, Scrolling Marquee Scrolling Marquee, BACnet Communication 9 Scrolling Marquee, EMM, BACnet Communication Electrical Options Single Point Power, XL, Terminal Block 1 Single Point Power, XL, Non-Fused Disconnect Dual Point Power, XL, Terminal Block** Ambient/Capacity Control/ Interrupt Options Std Ambient, Std Compressor, Std Interrupt Std Ambient, Digital Compressor, Std Interrupt 3 Std Ambient, Std Compressor, High Interrupt 5 Std Ambient, Digital Compressor, High Interrupt Low Ambient, Std Compressor, Std Interrupt Low Ambient, Digital Compressor, Std Interrupt 9 Low Ambient, Std Compressor, High Interrupt C Low Ambient, Digital Compressor, High Interrupt Line Length Options 1 Standard Line Length Long Line Length Check Valves a3-75

Capacity ratings UNIT SIZE CAPACITY NOMINAL TONS ( Hz) EER Energy Efficiency Ratio IPLV Integrated Part Load Value CAPACITY NOMINAL ( Hz) 3AP UNIT CAPACITY RATINGS CAPACITY NOMINAL TONS ( Hz) CAPACITY NOMINAL ( Hz) EER ( Hz) EER ( Hz) IPLV ( Hz) 3APS5..3. 7.3 11. 11. 1. 1. 3APD5..3. 7.3 11. 11. 13.1 1.9 3APS7. 93.. 7.1.9 11.7 1.7 1. 3APD7. 93.. 7.1.9 11.7 1. 15. 3APS3 31.1 9.. 91.. 11.5 1.3 15.9 3APD3 31.1 9.. 91.. 11.5 1. 1. 3APS 39. 139. 3. 115.3 11.5 1. 1. 1. 3APD 39. 137.7 3. 11. 11.5 1.1 15.3 17. 3APS.1 1.9 39.5 13.9. 11. 15. 1.7 3APD. 175. 1. 1.3 11.1 11. 1.9 1.7 3APD 5.3.7. 1. 11. 11.5 1.5 1. 3APS5 59. 9. 9. 173.7 11.1 11.5 15.1 17. 3APD7 7.3 3. 5.5 5.7 11. 11.3 15.7 17.7 3APD 7. 73.9.5. 11.1 11.5 15. 17.5 3APD9 7. 3.9 71.9 5. 11.3 11. 15.3 17. 3APD 9. 337. 79.. 11.1 11. 15. 1.9 3APD115 1. 3.3 9. 319.3 11.1 11. 15. 17.1 3APD13 15.1.3 3.7 3. 11.1 11.5 15. 17.1 IPLV ( Hz) 1. Unit performance is rated in accordance with AHRI (Air Conditioning, Heating, and Refrigeration Institute) Standard.. Ratings are based on 5 F (7. C) saturated suction temperature and 95 F ( C) outside-air temperature, standard fans, and include suction line losses. 5

Physical data MCHX Microchannel Heat Exchanger ODF Outside Diameter, Female *Typical operating charge with 5 ft of interconnecting piping. Operating charge is approximate for maximum system capacity. Unit is factory supplied with nitrogen holding charge. Refrigerant charge for dual circuit units is the total for both circuits. Maximum vertical separation between evaporator coil and condensing unit if condensing unit is below the evaporator. NOTE: Refer to Loading Sequences tables in Application Data section on page 91 or contact Application Engineering for detailed capacity step data. 3AP5- UNITS ENGLISH 3AP UNIT SIZE 5 7 3 NOMINAL CAPACITY, / Hz (tons) 1/5 3/7 5/3 33/ / CIRCUIT Dual Single Dual Single Dual Single Dual Single Dual Single OPERATING WEIGHTS (lb) Standard 95 77 15 1 1 9 19 1977 With Low Sound Option 1131 1113 19 17 13 1 1 17 31 REFRIGERANT CHARGE (lb) Total* Circuit A/Circuit B NITROGEN SHIPPING CHARGE COMPRESSOR hp (Qty) (CKT A/CKT B) 1/1 11 (1)/ 11 (1) / 11 () 13/13 13 (1)/ 13 (1) / 13 () 1/1 15 (1)/ 15 (1) 9 9/ 15 psig CAPACITY STEPS Standard 3 3 Digital Option 3 7 3 7 CRANKCASE HEATER (W) (each compressor) 9 ( Hz), 75 ( Hz) CONDENSER FANS Standard Propeller Type, Axial, Vertical Discharge Quantity 3 3 3 3 RPM 1 ( Hz), 9 ( Hz) Diameter (in.) 3 Total Watts ( Hz) 33 33 33 33 33 33 Total Watts ( Hz) 1997 1997 1997 1997 1997 1997 51 51 51 51 Low Noise Plastic Type, Axial, Vertical Discharge Quantity 3 3 3 3 RPM ( Hz), 7 ( Hz) Diameter (in.) 3 Total Watts ( Hz) 7 7 7 7 7 7 3 3 3 3 Total Watts ( Hz) 1 1 1 1 1 1 11 11 11 11 CONDENSER COIL MCHX Type No. Coils per Circuit 1 1 1 1 1 1 1 1 sq ft 7.1 7.1 33.9 33.9 33.9 33.9 7. 7. 7. 7. TEMPERATURE RELIEF Fusible Plug on Liquid Lines of Each Circuit - F CONNECTIONS (in.) ODF (CKT A/CKT B) Suction Line 1 3 / / 1 3 / 1 5 / 1 3 / / 1 3 / 1 5 / 1 3 / / 1 3 / 1 5 / 1 5 / / 1 5 / 1 / 1 5 / / 1 5 / 1 / Liquid Line 5 / / 5 / 5/ 5/ / 5 / 5/ 5/ / 5 / 7/ 5/ / 5 / 7/ 5/ / 5 / 7/ MAXIMUM HEIGHT FOR 3 F SUBCOOLING (ft) 75 75 75 75 75 75 75 75 75 75 CAPACITY PER CIRCUIT (%) (CKT A/CKT B) / / / 5/ /5 MINIMUM UNIT CAPACITY (%) Standard Compressor 7 33 3 33 Digital Compressor 17 17 17 17 17 17 13 1 11 1 15 () 3 1/17 ()/.5 () 39 39/ 13 (3) / 11 ()/ 13 () / 15 (3)

MCHX Microchannel Heat Exchanger ODF Outside Diameter, Female *Typical operating charge with 5 ft of interconnecting piping. Operating charge is approximate for maximum system capacity. Unit is factory supplied with nitrogen holding charge. Refrigerant charge for dual circuit units is the total for both circuits. Maximum vertical separation between evaporator coil and condensing unit if condensing unit is below the evaporator. NOTE: Refer to Loading Sequences tables in Application Data section on page 91 or contact Application Engineering for detailed capacity step data. 3AP-13 UNITS ENGLISH 3AP UNIT SIZE 5 7 9 115 13 NOMINAL CAPACITY, / Hz (tons) / 5/5 5/7 7/ 75/9 3/ 9/115 /13 CIRCUIT Dual Single Dual Dual Dual Dual Dual Dual OPERATING WEIGHTS (lb) Standard 7 51 311 33 With Low Sound Option 99 33 5 7 93 95 3319 31 REFRIGERANT CHARGE (lb) Total* Circuit A/Circuit B NITROGEN SHIPPING CHARGE COMPRESSOR hp (Qty) (CKT A/CKT B) 5 7/9 55 /55 9/33 75 9/ 5 39/ 9 / 1 /55 117 /71 15 psig 13 ()/15 () (3) 15 ()/11 (3) 15 ()/15 (3) 13 (3)/15 (3) 15 (3)/15 (3) 15 (3)/ (3) 15 (3)/5 (3) CAPACITY STEPS Standard 3 5 5 Digital Option 3 5 5 5 5 5 5 CRANKCASE HEATER (W) (each compressor) 9 ( Hz), 75 ( Hz) CONDENSER FANS Standard Propeller Type, Axial, Vertical Discharge Quantity 5 7 RPM 1 ( Hz), 9 ( Hz) Diameter (in.) 3 Total Watts ( Hz) 7 9 9, 1, Total Watts ( Hz) 3751 33 33 53 55 55 3 7 Low Noise Plastic Type, Axial, Vertical Discharge Quantity 5 7 RPM ( Hz), 7 ( Hz) Diameter (in.) 3 Total Watts ( Hz) 7 7 7, Total Watts ( Hz) 31 35 35 371 53 53 59 CONDENSER COIL MCHX Type No. Coils per Circuit 1 3 to 3 3 3 3 to 3 to 5 sq ft 7. 99. 99. 1.5 19. 19. 17.3 199. TEMPERATURE RELIEF Fusible Plug on Liquid Lines of Each Circuit - F CONNECTIONS (in.) ODF (CKT A/CKT B) Suction Line 1 5 / / 1 5 / 5 / 1 5 / / 1 / 1 5 / / 1 / 1 / / 1 / 1 / / 1 / 1 / / 5 / 1 / / 5 / Liquid Line 5 / / 5 / 7/ 7/ / 7 / 7/ / 7 / 7/ / 7 / 7/ / 7 / 7/ / 7 / 7/ / 1 1 / MAXIMUM HEIGHT FOR 3 F SUBCOOLING (ft) 75 75 75 75 75 75 75 75 CAPACITY PER CIRCUIT (%) (CKT A/CKT B) /5 7/53 / /5 / /5 3/ MINIMUM UNIT CAPACITY (%) Standard Compressor 3 33 15 17 1 13 Digital Compressor 11 11 9 7 7 7

Physical data (cont) MCHX Microchannel Heat Exchanger ODF Outside Diameter, Female *Typical operating charge with 7. m of interconnecting piping. Operating charge is approximate for maximum system capacity. Unit is factory supplied with nitrogen holding charge. Refrigerant charge for dual circuit units is the total for both circuits. Maximum vertical separation between evaporator coil and condensing unit if condensing unit is below the evaporator. NOTE: Refer to Loading Sequences tables in Application Data section on page 91 or contact Application Engineering for detailed capacity step data. 3AP5- UNITS SI 3AP UNIT SIZES 5 7 3 NOMINAL CAPACITY / Hz () 73/ 79/95 /5 117/11 1/17 CIRCUIT Dual Single Dual Single Dual Single Dual Single Dual Single OPERATING WEIGHTS (kg) Standard 97 9 571 5 573 55 9 93 91 97 With Low Sound Option 513 5 57 579 59 5 97 917 9 91 REFRIGERANT CHARGE (kg) Total* Circuit A/Circuit B NITROGEN SHIPPING CHARGE COMPRESSOR (Qty) (CKT A/CKT B) 1 / 11 11/ 1 / 1.3 bar. (1)/ 9.7 (1)/ 11. (1)/ 7.5 ()/. ()/. (1). () 9.7 (1) 9.7 () 11. (1) 11. ().3 () 9.7 (3) 9.7 () 11. (3) CAPACITY STEPS Standard 3 3 Digital Option 3 7 3 7 CRANKCASE HEATER (W) (each compressor) 9 ( Hz), 75 ( Hz) CONDENSER FANS Standard Propeller Type, Axial, Vertical Discharge Quantity 3 3 3 3 r/s 19 ( Hz), 1 ( Hz) Diameter (mm) 7 Total Watts ( Hz) 33 33 33 33 33 33 Total Watts ( Hz) 1997 1997 1997 1997 1997 1997 51 51 51 51 Low Noise Plastic Type, Axial, Vertical Discharge Quantity 3 3 3 3 r/s 1 ( Hz), 1 ( Hz) Diameter (mm) 7 Total Watts ( Hz) 7 7 7 7 7 7 3 3 3 3 Total Watts ( Hz) 1 1 1 1 1 1 11 11 11 11 CONDENSER COIL MCHX Type No. Coils per Circuit 1 1 1 1 1 1 1 1 sq m.5.5 3.1 3.1 3.1 3.1.3.3.3.3 TEMPERATURE RELIEF Fusible Plug on Liquid Lines of Each Circuit - 99 C CONNECTIONS (in.) ODF (CKT A/CKT B) Suction Line 1 3 / / 1 3 / 1 5 / 1 3 / / 1 3 / 1 5 / 1 3 / / 1 3 / 1 5 / 1 5 / / 1 5 / 1 / 1 5 / / 1 5 / 1 / Liquid Line 5/ / 5 / 5 / 5 / / 5 / 5 / 5 / / 5 / 7 / 5 / / 5 / 7 / 5 / / 5 / 7 / 3 3 3 3 3 3 3 3 3 3 MAXIMUM HEIGHT FOR 1.7 C SUBCOOLING (m) CAPACITY PER CIRCUIT (%) (CKT A/CKT B) / / / 5/ /5 MINIMUM UNIT CAPACITY (%) Standard Compressor 7 33 3 33 Digital Compressor 17 17 17 17 17 17 13 1 11 1 1 1/ 1 7/7 13 13/ 1 / 1 1/ /1 /

MCHX Microchannel Heat Exchanger ODF Outside Diameter, Female *Typical operating charge with 7. m of interconnecting piping. Operating charge is approximate for maximum system capacity. Unit is factory supplied with nitrogen holding charge. Refrigerant charge for dual circuit units is the total for both circuits. Maximum vertical separation between evaporator coil and condensing unit if condensing unit is below the evaporator. NOTE: Refer to Loading Sequences tables in Application Data section on page 91 or contact Application Engineering for detailed capacity step data. 3AP-13 UNITS SI 3AP UNIT SIZES 5 7 9 115 13 NOMINAL CAPACITY / Hz () 17/11 19/ 5/ 3/1 /31 93/1 337/ 31/57 CIRCUIT Dual Single Dual Dual Dual Dual Dual Dual OPERATING WEIGHTS (kg) Standard 11 1111 11 1 19 15 151 With Low Sound Option 3 119 11 15 13 1339 15 157 REFRIGERANT CHARGE (kg) Total* Circuit A/Circuit B NITROGEN SHIPPING CHARGE COMPRESSOR (Qty) (CKT A/CKT B) 5 1/13 9.7 ()/ 11. () 5 /5 13/15 15. (3) 11. ()/. (3) 3 13/1 11. ()/ 11. (3) 1.3 bar 39 1/1 9.7 (3)/ 11. (3) 1/1 11. (3)/ 11. (3) 1/5 11. (3)/ 15. (3) 53 1/3 11. (3)/ 1. (3) CAPACITY STEPS Standard 3 5 5 Digital Option 3 5 5 5 5 5 5 CRANKCASE HEATER (W) (each compressor) 9 CONDENSER FANS Standard Propeller Type, Axial, Vertical Discharge Quantity 5 7 r/s 19 ( Hz), 1 ( Hz) Diameter (mm) 7 Total Watts ( Hz) 7 9 9 Total Watts ( Hz) 3751 33 33 53 55 55 3 7 Low Noise Plastic Type, Axial, Vertical Discharge Quantity 5 7 r/s 1 ( Hz), 1 ( Hz) Diameter (mm) 7 Total Watts ( Hz) 7 7 7 Total Watts ( Hz) 31 35 35 371 53 53 59 CONDENSER COIL MCHX Type No. Coils per Circuit 1 3 to 3 3 3 3 to 3 to 5 sq m.3.9 9.3 11. 13.9 13.9 1. 1.5 TEMPERATURE RELIEF Fusible Plug on Liquid Lines of Each Circuit - 99 C CONNECTIONS (in.) ODF (CKT A/CKT B) Suction Line 1 5 / / 1 5 / 5 / 1 5 / / 1 / 1 5 / / 1 / 1 / / 1 / 1 / / 1 / 1 / / 5 / 1 / / 5 / Liquid Line 5 / / 5 / 7/ 7/ / 7 / 7/ / 7 / 7/ / 7 / 7/ / 7 / 7/ / 7 / 7/ / 1 1 / MAXIMUM HEIGHT FOR 1.7 C 3 3 3 3 3 3 3 3 SUBCOOLING (m) CAPACITY PER CIRCUIT (%) (CKT A/CKT B) /5 7/53 / /5 / /5 3/ MINIMUM UNIT CAPACITY (%) Standard Compressor 3 33 15 17 1 13 Digital Compressor 11 11 9 7 7 9

Options and accessories ITEM FACTORY-INSTALLED OPTION FIELD-INSTALLED ACCESSORY Condenser Coil/Low Sound Options E-Coated MCHX X Low Sound Fan(s) X X Low Sound Compressor Blankets X X Vibration Isolation Pads X Line Length Options Long Line Length Check Valve X X Ambient/Capacity Control/Interrupt Options Digital Compressor* X High Short Circuit Current Rating Interrupt X Motormaster V Low Ambient Control X X Electrical Options Dual Point Power (sizes 115 and 13 only) X Non-Fused Disconnect X Controls/Communications Options Navigator Display X Remote Enhanced Display X Touch Pilot Display X EMM X X BACnet Communications X BACnet Translator Control X LON Translator Control X Packaging/Security Options Bottom Skid X Top Crate, Bag X Security Grilles/Hail Guards X X Wind Baffles X E-Coated Epoxy Coating Applied to Entire Coil Assembly EMM Energy Management Module LON Local Operating Network MCHX Microchannel Heat Exchanger *Digital compressors provide incremental unloading from full capacity down to a minimum value. Not available on size 5 unit. 1. Std Interrupt - SCCR (short circuit current rating) (5K). High Interrupt - SCCR -v and 3/15-v (5K), /3-v (5K), 575-v (5K) Factory-installed options E-coated Novation heat exchanger technology microchannel coil (aluminum fin/aluminum tube) condenser is available for optimum durability. Novation heat exchangers with microchannel coil technology are offered coated or uncoated to match coil protection to site conditions. The Carrier Electronic Catalog (E-Cat) can be used to determine whether or not corrosion protection is recommended for particular applications in coastal/marine environments. Following the input of the requested data, the E- Cat program output will advise the appropriate coil to be used. Other factors described in "Selection Guide: Environmental Corrosion Protection, Novation Heat Exchanger with Microchannel Coil Technology" catalog number - 5-1 must also be considered to determine if corrosion protection is required. Low sound fans provide a specially designed system of fan propellers and stacks that reduce sound without reducing unit performance. The factory-installed fan option is compatible with the Motormaster V option. Low sound fans are also available as field-installed accessory. Low sound compressor blankets reduce unit sound levels by providing an acoustic blanket on each compressor. Compressor blankets are also available as fieldinstalled accessory. Security grilles/hail guards consist of louvered, sheet metal panels which securely fasten to the unit and provide condenser coil protection against hail and physical damage. Security grilles/hail guards are also available as fieldinstalled accessories. Long line length check valves are required for liquid line installation on all linear line length applications of more than ft (3.5 m). For any 5-3 size dual-circuit unit application where evaporator is located higher than the condensing unit, check valves are required for linear line length above 55 ft (1. m). The check valve option prevents charge migration to compressor. Check valves are also available as field-installed accessories. Digital compressor control allows incremental unloading for a closer match to building load, improved compressor reliability in the reduced compressor cycling, and improved efficiency as compared to hot gas bypass and other modulating methods. Refer to Loading Sequences table in Application Data section on page 91. Digital compressor option is not available on unit size 5. High short circuit current rating interrupt provides a short circuit current rating protection for the unit up to 5, A on -v, 3/15-v, and /3-v units or 5, A on 575-v units. Motormaster V low-ambient control provides control of outdoor-fan motor operation to maintain head pressure at low outdoor ambient temperatures down to F ( 9 C) for and Hz units. Only one factory-installed low ambient temperature kit per unit is required. This option also requires field-installed wind baffles. The Motormaster V low-ambient control is also available as a field-installed accessory. Dual point power connection option is provided with terminal blocks for size 115 and 13 units.

Non-fused disconnect includes factory-installed nonfused disconnect capability for power and control located at the unit. Packaging options include bottom skid with standard coil protection and bottom skid, top crate with bag. Standard coil protection is also included on all unit packaging. Energy management module (EMM) provides energy management capabilities to minimize condensing unit energy consumption. The EMM is also available as a fieldinstalled accessory. BACnet communications option provides factory installed communication capability with a BACnet MS/TP network. Allows integration with i-vu Open control system or a BACnet building automation system. Field-installed accessories Vibration isolation pads reduce vibration transmission from the compressor through the floor and into the conditioned space. The neoprene isolator pads measure 1 / in. thick ( in. x 3 in.). Long line length check valves are required for liquid line installation on all linear line length applications of more than ft (3.5 m). For any 5-3 size dualcircuit unit application where evaporator is located higher than the condensing unit, check valves are required for linear line length above 55 ft (1. m). The check valve option prevents charge migration to compressor. Check valves are also available as a factory-installed option. Motormaster V low-ambient control provides control of outdoor-fan motor operation to maintain head pressure at low outdoor ambient temperatures down to F ( 9 C) for and Hz units. Only one field-installed low ambient temperature kit per unit is required. This accessory also requires field-installed wind baffles. The Motormaster V low-ambient control is also available as a factory-installed option. Navigator display module provides a portable, hand held display module for convenient access to unit status, operation, configuration and troubleshooting diagnostics capability. The -line, -character LCD (liquid crystal display) display provides clear language information in English, French, Spanish or Portuguese. The weatherproof enclosure and industrial grade extension cord make the Navigator module ideally suited for outdoor applications. Magnets located on the back of the module allow attachment of any sheet metal component for hands free operation. Energy management module provides energy management capabilities to minimize condensing unit energy consumption. The EMM is also available as a factory-installed option. BACnet translator control provides an interface between the unit and a BACnet Local Area Network (LAN, i.e., MS/TP EIA-5). LON (local operating network) translator control provides an interface between the unit and a local operating network (i.e., LonWorks * FT-A ANSI/EIA-79.1). Remote enhanced display accessory kit contains a remotely mounted -character per line, 1-line display panel for unit diagnostics. Touch Pilot display is a cost-effective, touch-screen, remote-mount device that can be used in lieu of the remote enhanced display. Low sound compressor blankets reduce unit sound levels by providing an acoustic blanket on each compressor. Compressor blankets are also available as factoryinstalled option. Security grilles/hail guards consist of louvered, sheet metal panels which securely fasten to the unit and provide condenser coil protection against hail and physical damage. Security grilles/hail guards are also available as a factory-installed option. Low sound fans provide a specially designed system of fan propellers and stacks that reduce sound without reducing unit performance. The field-installed fan accessory is compatible with the Motormaster V option. Low sound fans are also available as factory-installed option. Wind baffles facilitate operation down to F ( 9 C) when used in conjunction with low ambient temperature head pressure control. Use of wind baffles alone, without the use of Motormaster V low-ambient control, does not reduce the minimum standard ambient values. *Registered trademark of Echelon Corporation. 11

Dimensions 3AP5-3 UNITS SERVICE VALVE CONNECTIONS, in. (mm) POWER ENTRY, in. (mm) HEIGHT, in. (mm) CENTER OF GRAVITY, in. (mm) STANDARD WEIGHT, lb (kg) UNIT X Y H P Suction Liquid 3APS5 77 (9) 17. (5) 3.9 (937) 1 1. (159).9 (3) 5 / (1) 5/ (1) 3APD5 95 (97) 17. (5) 37. (9) 1 3 / () 5 / (1) 3APS7 (53) 1. () 37. (955) COIL AREA 3 [91] MIN. 1 5 / (1) 5/ (1) 3APD7 15 (571) 1. () 37. (955) 1 3 / () 5/ (1) 73.1 (157) 3.9 (937) 3APS3 1 (55) 1. () 37.5 (953) 1 5 / (1) 7 / () 3APD3 1 (573) 1. () 37. (955) 1 3 / () 5 / (1) 3APS5 1113 (5) 17. (5) 3.9 (937) 1 5 / (1) 5/ (1).5 (19).9 (3) Standard [119] MIN. 3APD5 1131 (513) 17. (5) 37. (9) 1 3 / () 5 / (1) 3APS7 17 (579) 1. () 37. (955) 1 5 / (1) 5 / (1) SERVICE CLEARANCE BORDER (NOT TO SCALE) Low Sound 3APD7 19 (57) 1. () 37. (955) 1 3 / () 5/ (1) 7. (199) 3.9 (937) 3APS3 1 (5) 1. () 37.5 (953) 1 5 / (1) 7 / () 3APD3 13 (59) 1. () 37. (955) 1 3 / () 5 / (1) PANEL SIDE SEE NOTE #5 [7] MIN. AIR FLOW CG COIL SIDE SEE NOTE #5 Y 3 [91] MIN. 1. Be sure to use a wet rag and remove all valve cores before brazing field piping.. Do not cap or otherwise obstruct the liquid line temperature relief. 3. A 7 / in. (. mm) diameter hole is provided for locating field power wiring. Actual hole size required depends on field wire sizing.. A.37 in. (11.1 mm) diameter hole is used for mounting unit. 5. Unit must have clearances as follows: Top - Do not restrict. Coil End - in. (7) from solid surface. Panel Side - in. (119) per NEC (National Electrical Code).. Unit height (dimension H) for the low sound fan option includes the fan stack. 7. Installation in a pit is not recommended.. Unit can be handled using the fork truck lift pockets. 9. Dimensions shown in inches (mm).. Weight does not include unit refrigerant charge. 11. For 3APS piping, refer to Circuit A Liquid Connection and Circuit A Suction Connection. X. [ 1.3 ] TOP VIEW AIR FLOW.3 [.5 ] LOW SOUND FAN STACK (PICTORIALLY ONLY) RADIUS [] CONTROL BOX HINGED ACCESS COIL SIDE SEE NOTE #5 7/ [. ] FIELD POWER ENTRY SEE NOTE #3 CONTROL BOX HINGED ACCESS LIQUID CONNECTION a3-73 SERVICE ACCESS FIELD CONTROL WIRING CONNECTIONS SUCTION CONNECTION SUCTION CONNECTION H SEE NOTE # LIQUID CONNECTION. [ 117. ] COMPRESSOR ACCESS P.5 [ 1. ] 9.5 [ 1. ] 1. [ 3.1 ] 1. [ 3.1 ] RIGHT SIDE VIEW 1. [ 5. ] SEE NOTE # TYP. SEE NOTE'S #1, 1. [ 5. ] SEE NOTE # TYP. 11.1 [ 3. ] FRONT VIEW 15.31 [ 3.9 ] 1. [ 53.9 ].5 [ 3. ] 1

3AP- UNITS 1. Be sure to use a wet rag to remove all valve cores before brazing field piping.. Do not cap or otherwise obstruct the liquid line temperature relief. 3. A 7 / in. (. mm) diameter hole is provided for locating field power wiring. Actual hole size required depends on field wire sizing.. A.37 in. (11.1 mm) diameter hole is used for mounting unit. 5. Unit must have clearances as follows: Top - Do not restrict. Coil End - in. (19) from solid surface. Panel Side - in. (119) per NEC (National Electrical Code).. Unit height (dimension H) for the low sound fan option includes the fan stack. 7. Installation in a pit is not recommended.. Unit can be handled using the fork truck lift pockets. 9. Dimensions shown in inches (mm).. Sizes and units have 3 condenser fans. Size units have condenser fans. 11. Weight does not include unit refrigerant charge. 1. For 3APS piping, refer to Circuit A Liquid Connection and Circuit A Suction Connection. SERVICE VALVE CONNECTIONS, in. (mm) HEIGHT, in. (mm) CENTER OF GRAVITY, in. (mm) STANDARD WEIGHT, lb (kg) UNIT X Y H Suction Liquid 3APS 19 (93). (9). (111) 1 / (5) 7/ () 3APD 9 (9) 33.7 (5).1 (1) 1 5 / (1) 5 / (1) 3APS 1977 (97) 3.9 (). (111) 73. (15) 1 / (5) 7/ () Standard 3APD (91) 33. ().1 (1) 1 5 / (1) 5 / (1) 3APD 7 () 3. (7).1 (1) 1 5 / (1) 5/ (1) 3APS (917). (9). (111) 1 / (5) 7 / () 3APD 1 (97) 33.7 (5).1 (1) 1 5 / (1) 5 / (1) 3APS 31 (91) 3.9 (). (111) 7.5 (199) 1 / (5) 7/ () Low Sound 3APD 17 (9) 33. ().1 (1) 1 5 / (1) 5 / (1) 3APD 99 (3) 3. (7).1 (1) 1 5 / (1) 5 / (1) [7] MIN. AIR FLOW COIL SIDE SEE NOTE #5 [119] MIN. NOTE: 3 OR FANS COIL AREA [119] MIN. SERVICE CLEARANCE BORDER (NOT TO SCALE) PANEL SIDE SEE NOTE #5 CG a3-7 PANEL SIDE SEE NOTE #5 Y COIL COMPRESSOR AREA ACCESS [7] MIN. X COIL SIDE SEE NOTE #5 AIR FLOW TOP VIEW FRONT VIEW (SINGLE CIRCUIT). [1.3] 9.13 [ 3. ] AIR FLOW LOW SOUND FAN STACK (PICTORIALLY ONLY) RADIUS [] CONTROL BOX HINGED ACCESS SERVICE ACCESS LIQUID CONNECTION CONTROL BOX HINGED ACCESS SUCTION CONNECTION 7/ [. ] FIELD POWER ENTRY SEE NOTE #3 H SEE NOTE # FIELD CONTROL WIRING CONNECTIONS.3 SUCTION CONNECTION COMPRESSOR COMPRESSOR [ 117. ] ACCESS ACCESS 7.9 LIQUID CONNECTION [ 7.7 ] 1. [ 5. ] SEE NOTE # TYP. 1. [ 5. ] SEE NOTE # TYP.. [.5 ] 9.5 [ 5.1 ] 1. [ 3.1 ] 1. [ 3.1 ] FRONT VIEW (DUAL CIRCUIT) RIGHT SIDE VIEW 3.7 [ 97. ] SEE NOTE'S #1, 1.13 [.7 ]. [ 119. ] 9.9 [ 1.5 ] REAR VIEW 13

Dimensions (cont) 3AP5,7 UNITS a3-75 SERVICE VALVE LOCATIONS ONLY, in. (mm) SERVICE VALVE CONNECTIONS, in. (mm) HEIGHT, in. (mm) CENTER OF GRAVITY, in. (mm) STANDARD WEIGHT, lb (kg) UNIT Suction Suction Liquid X Y H Circuit A Circuit B S1 S 3APS5 51 (11) 3. (9) 3. (17) 73. (15) 5 / (7) 7 / () 9. (.).1 (5.) 3APD7 (1111).9 (193). (31) 73. (15) 1 5 / (1) 1 / (5) 7/ () 1.5 (3.) 1. (.) Standard 3APS5 33 (119).1 (9) 3.5 (7) 7.5 (199) 5 / (7) 7/ () 9. (.).1 (5.) 3APD7 5 (11).9 (193). (31) 7.5 (199) 1 5 / (1) 1 / (5) 7 / () 1.5 (3.) 1. (.) Low Sound AIR FLOW COIL SIDE SEE NOTE #5 [7] MIN. [7] MIN. SERVICE CLEARANCE BORDER (NOT TO SCALE) PANEL SIDE SEE NOTE #5 1. Be sure to use a wet rag to remove all valve cores before brazing field piping.. Do not cap or otherwise obstruct the liquid line temperature relief. 3. A 7 / in. (. mm) diameter hole is provided for locating field power wiring. Actual hole size required depends on field wire sizing.. A.37 in. (11.1 mm) diameter hole is used for mounting unit. 5. Unit must have clearances as follows: Top - Do not restrict. Coil, Panel and Rear Side - in. (19) from solid surface.. Unit height (dimension H) for the low sound fan option includes the fan stack. 7. Installation in a pit is not recommended.. Unit can be handled using crane. Refer to service installation instructions. 9. Dimensions shown in inches (mm).. Weight does not include unit refrigerant charge. AIR FLOW AIR FLOW CG REAR SIDE SEE NOTE #5 15.59 [ 39. ] Y.7 [ 11.3 ] COIL SIDE SEE NOTE #5 X [7] MIN. TOP VIEW [7] MIN. AIR FLOW 1. [ 15.3 ] LOW SOUND FAN STACK (PICTORIALLY ONLY). [ 1. ] AIR FLOW. [. ] RADIUS [] CONTROL BOX HINGED ACCESS 3APD7 "ONLY" CONTROL BOX HINGED ACCESS CONTROL BOX HINGED ACCESS SUCTION CONNECTION LIQUID CONNECTION H SEE NOTE #. [ 1. ] SUCTION CONNECTION LIQUID CONNECTION 3.99 [.7 ] 1.57 [ 319. ] S1 1. [ 5. ] 1. [ 5. ] 1.5 [ 311. ] 1.5 [ 311. ] 1. [. ] S 1. [ 3.1 ] SEE NOTE # TYP. 1. [ 3.1 ] SEE NOTE # TYP..3 [ 7.1 ] FRONT VIEW (3APD7) FRONT VIEW (3APS5) RIGHT SIDE VIEW. [ 73. ] FIELD CONTROL WIRING CONNECTIONS 1

AIR FLOW [7] MIN. COIL SIDE SEE NOTE #5.5 [ 7. ] SERVICE CLEARANCE BORDER (NOT TO SCALE) 3AP- UNITS SERVICE VALVE CONNECTIONS, in. (mm) Suction Liquid HEIGHT, in. (mm) CENTER OF GRAVITY, in. (mm) STANDARD WEIGHT, lb (kg) UNIT X Y H Circuit A Circuit B 3APD (11) 7. (171). () 1 5 / (1) 1 / (5) 7 / () 3APD9 (1) 7. (139) 3.3 (99) 73. (15) 1 / (5) 7 / () 3APD (19) 7. (1) 3.3 (99) 1 / (5) 7/ () 3APD 7 (15) 7. (171). () 1 5 / (1) 1 / (5) 7 / () 3APD9 93 (13) 7. (139) 3.3 (99) 7.5 (199) 1 / (5) 7 / () 3APD 95 (1339) 7. (1) 3.3 (99) 1 / (5) 7/ () Standard Low Sound COIL SIDE SEE NOTE #5 [7] MIN. PANEL SIDE SEE NOTE #5 1. Be sure to use a wet rag to remove all valve cores before brazing field piping.. Do not cap or otherwise obstruct the liquid line temperature relief. 3. A 7 / in. (. mm) diameter hole is provided for locating field power wiring. Actual hole size required depends on field wire sizing.. A.37 in. (11.1 mm) diameter hole is used for mounting unit. 5. Unit must have clearances as follows: Top - Do not restrict. Coil, Panel and Rear Side - in. (19) from solid surface.. Unit height (dimension H) for the low sound fan option includes the fan stack. 7. Installation in a pit is not recommended.. Unit can be handled using crane. Refer to service installation instructions. 9. Dimensions shown in inches (mm).. Size units have 5 condenser fans. Sizes 9 and units have condenser fans. 11. Weight does not include unit refrigerant charge. CG.7 [ 11.3 ] Y 15.1 [ 39. ] REAR SIDE SEE NOTE #5 TOP VIEW [7] MIN. X AIR FLOW [7] MIN. 151.9 [ 337. ] FIELD CONTROL WIRING CONNECTIONS.5 [ 1. ] AIR FLOW RADIUS [] CONTROL BOX HINGED ACCESS 7/ [. ] FIELD POWER ENTRY SEE NOTE #3 CONTROL BOX HINGED ACCESS H SEE NOTE #. [ 1. ] SUCTION CONNECTION SUCTION CONNECTION 3.99 [.7 ] LIQUID CONNECTION LIQUID CONNECTION LOW SOUND FAN STACK (PICTORIALLY ONLY) 1.5 [ 3. ] 1. [ 5. ] 1. [.5 ] 1.5 [ 3. ] 1.5 [ 311. ] RIGHT SIDE VIEW 1.5 [ 311. ] 1. [ 5. ] 1. [. ] 1. [ 3.1 ] SEE NOTE # TYP. a3-7 FRONT VIEW 1. [ 3.1 ] SEE NOTE # TYP.. [ 73. ] 15

Dimensions (cont) a3-77 3AP115,13 UNITS Standard Low Sound SERVICE CLEARANCE BORDER (NOT TO SCALE) UNIT AIR FLOW CG TOP VIEW AIR FLOW 9. [.1 ].1 [ 5. ] L1 L 1.5 [ 311. ] 1.5 [ 3. ] 1. [ 3.1 ] 1. [. ]. [ 7.3 ] Y.7 [ 11.3 ] 15.1 [ 39. ].5 [ 1. ] RADIUS [] CONTROL BOX HINGED DOOR X 191.3 [. ] AIR FLOW CONTROL BOX HINGED ACCESS H 3.99 [.7 ]. [ 1. ] 7/ [. ] FIELD POWER ENTRY SEE NOTE #3 1. [ 3.1 ] SEE NOTE # TYP. FRONT VIEW 1. [ 3.1 ] SEE NOTE # TYP. 1. [ 3.1 ] LOW SOUND FAN STACK (PICTORIALLY ONLY) SUCTION CONNECTION LIQUID CONNECTION AIR FLOW SUCTION CONNECTION LIQUID CONNECTION SEE NOTE # RIGHT SIDE VIEW REAR SIDE SEE NOTE #5 STANDARD WEIGHT, lb (kg) CENTER OF GRAVITY, in. (mm) PANEL SIDE SEE NOTE #5 HEIGHT, in. (mm) SERVICE VALVE CONNECTIONS, in. (mm) COIL SIDE SEE NOTE #5 SERVICE VALVE LOCATIONS ONLY, in. (mm) Suction Liquid Liquid X Y H Circuit A Circuit B Circuit A Circuit B L1 L 3APD115 311 (157) 71.1 (). (11) 1 / (5) 5 / (7) 7/ () 7/ (). (73) 1.5 (311) 73. (15) 3APD13 33 (151) 7.9 (1). (1133) 1 / (5) 5 / (7) 7/ () 1 1 / (9).3 (7) 11.97 (3) 3APD115 3319 (1) 71.1 (). (11) 1 / (5) 5 / (7) 7/ () 7/ (). (73) 1.5 (311) 7.5 (199) 3APD13 31 (157) 7.9 (1). (1133) 1 / (5) 5 / (7) 7/ () 1 1 / (9).3 (7) 11.97 (3) 1. Be sure to use a wet rag to remove all valve cores before brazing field piping.. Do not cap or otherwise obstruct the liquid line temperature relief. 3. A 7 / in. (. mm) diameter hole is provided for locating field power wiring. Actual hole size required depends on field wire sizing.. A.37 in. (11.1 mm) diameter hole is used for mounting unit. 5. Unit must have clearances as follows: Top - Do not restrict. Coil, Panel and Rear Side - in. (19) from solid surface.. Unit height (dimension H) for the low sound fan option includes the fan stack. 7. Installation in a pit is not recommended.. Unit can be handled using crane. Refer to service installation instructions. 9. Dimensions shown in inches (mm).. Weight does not include unit refrigerant charge. 11. Size 115 units have 7 condenser fans. Size 13 units have condenser fans. COIL SIDE SEE NOTE #5 1

Selection procedure To select a 3AP stand-alone condensing unit: Use Carrier's Commercial Split Builder program to select a stand-alone outdoor unit from the Installation Configuration drop down menu and input the job requirements. From the list presented, select a 3AP condensing unit that is estimated to meet capacity requirements. The 3APS single-circuit unit is offered in sizes 5-5 and the 3APD dual-circuit unit is offered in sizes 5-13. After a 3AP unit is selected, the program will calculate the condensing unit performance. To select 3AP systems: For systems with one RU fan coil unit or 39 Series air handler Use Carrier's Commercial Split Builder program to select a combined 3AP outdoor unit with matched RU indoor unit for sizes 5-3. The AHUBuilder selection program is available to select 3AP outdoor units with a matching 39 Series air handler with direct-expansion (DX) coils. The 3APS single-circuit unit is offered in sizes 5-5 and 3APD dual-circuit unit is offered in sizes 5-13. Enter the software program and input the job requirements. From the list presented, select a 3AP condensing unit that is estimated to meet capacity requirements. After selecting a 3AP unit, check its performance with one or several DX coils. From the DX coil list presented on the screen, match the 3AP with any coil or all coils. The program calculates the combined performance of the condensing unit and each DX coil and presents the resulting system capacities and operating temperatures. Matching thermostatic expansion valves and nozzles for the DX coils are automatically selected and displayed. For systems with two air handlers Use Carrier's AHUBuilder selection program to select one size 5-13 3AP outdoor unit to match with two 39 Series air handlers with DX coils. For the first air handler, enter the AHUBuilder selection program and input the job requirements. To choose a condensing unit, select the Specify Your Own option. The program asks for condensing unit capacities and SDT (saturated discharge temperature) at 3 F ( 1.1 C) and F ( C) (saturated suction temperature). The SDT must first be determined by running a standalone outdoor unit in the Commercial Split Builder program. The circuit capacity is listed in the Condensing Unit Circuit Ratings tables on pages -7, 33-, 9-5, and -71. Enter the capacities from condenser circuit A or B and SDT for circuits A and B into the AHUBuilder program (remember to use the correct air temperature entering condenser column when locating the circuit capacities). For the second air handler, repeat the procedure to select the second DX coil for the condenser circuit (A or B) not used in the first selection. 17

Performance data 3APD,APS5 CONDENSING UNIT RATINGS, Hz ENGLISH 7 5 9 95 5 1 115 15 3. 1. 33.3 5. 17. 9. 1. 19. 1.1 17. 1. 17. 1. 19.. 1.7.. 5.1.3 7..5 75. 17.5. 1. 57.7 19.9 9..9.. 31.9 3. 3..3 1. 5.5.7. 19.3 7. 17.5 9. 3. 1.1 9.5 19...5 73.5 1... 5. 3. 5.3 5... 5.7 7.5 1.. 7.1 9. 5 3. 31. 37.3 97.5 7.5 77. 7.1 5. 5.9 3.1 5.9 1.1 19..5 1.. 3. 5.. 7.5. 9. 3.7 1. 3.7 19. 331..9 3.5 1.9 39. 3. 9.. 7.5 5. 7.1.. 7. 53.9.9.9 3.1 3APD,APS7 CONDENSING UNIT RATINGS, Hz ENGLISH 7 5 9 95 5 1 115 15 3.5 7. 5. 57.5 9.3 1. 3.. 15.5 7. 199.1 19.. 1. 3..1 5..7. 9.5 3. 31. 39. 19.7 3.5.9 91.1..3 3.5 73..7. 5.9 55. 7. 5.9.5 3. 3. 7. 31.1 1.5 3.3 33.9.9 37.1.1 31. 3.5 37.3. 97. 5. 7. 7. 77.9.3 7. 9. 57.5 31.. 3.1 3.1 33.3 5 3. 3.5 3. 33. 31. 3. 3. 9. 77.9 7.5 5..9.1 3.5. 5. 7..3 9. 31. 3.1 33.3 391.3 379. 37.. 3.7 333.1 31. 39.5 97..1 7. 1.5.. 5.. 7..9 3. 31. 3. 33.9 3APD,APS3 CONDENSING UNIT RATINGS, Hz ENGLISH 7 5 9 95 5 1 115 15 3 3. 3.1 319..7 39..5 3.5 7.9 91. 9.3 1.9 3.9 7.5 3.5. 3. 53. 3. 3.9 37. 3.5 39. 9. 39. 339. 39. 319. 39.1 9.. 77.. 57. 3.7 5.3 7.1.5 3. 31.5 33. 3.9 3.7 3.1 39. 39.7 5. 379.. 3.5.5. 9.9 37. 31. 33.7 3.9.7 3.5 31.5 3. 33.1 3. 9.7 39. 1. 1. 5 1. 5. 9.. 397..5 3.5 9.9 373.5 31. 33.7 3.9.1 3.5 3. 3. 3.1 3. 317. 39. 35. 1. 5. 39.. 1.. 39.3 377.9.3. 3.3 37.9.1 7. 9. 3.7 3. 33.7.3 3.9 3.7.1 1. 3APD CONDENSING UNIT RATINGS, Hz ENGLISH 7 5 9 95 5 1 115 15 3 11. 7.1 397.9 9.1 3. 31.3 371.1 33.1...3 37. 331.9 39. 31. 1.1 3.1 3.3 91.5 5.1 7. 7.1 51.9 37.5.. 39.9 3.7 3. 1. 33. 33. 3.7 7. 9.7 31.9 33.7. 37.7 39.7 1.9.1 5.9 7.9 9.. 7. 3.. 33.1 7.5 3.9 3. 3.5 17.3 3.9 1.5 1..9 3. 39. 5.. 7.3 339.3 9. 5 53.1. 51. 3. 3.7 33.1.9 3.9 7.9 3.5 53. 3.9 37. 1..1 3. 1. 5.. 7.3 3.7 9. 5.3 53.9 5.3 57.5 9. 91.1 71. 53. 3.5 1.7 39.3 9. 31.5 33.7. 37. 39. 1.7 3.9.1..1 Gross Cooling Capacity ( Btuh) 1. Ratings are based on 15 F superheat and use of R-A. Ratings include suction line losses due to an accumulator. 1

3APS CONDENSING UNIT RATINGS, Hz ENGLISH 7 5 9 95 5 1 115 15 3 1.3 3. 39.5 37..7 3.1 3.3 37. 31.1 31.9 9.1 7.3 9. 31.3 33. 3.7 3.5 3...5.. 5.7.. 3.1.5 3.1 1.9 33. 1.3.5 37.5 37. 373.5 39.3 9.3 1.3 3. 3. 331. 5. 317.5.9 9. 9.1 3.7 3.9. 33. 53. 3.7 3.5 3. 3. 3.3.1. 39.. 377.5.3 3.5 5.9 37.3 7. 5 53. 5. 5. 93.3 77..5 3.7 7.7. 39. 377.7 3.1 31.9 3..7 37. 39. 1.1 3.1 5..9.7 59. 31.1 571. 33. 553.5.1 5. 3.7 517.1 3. 99.. 1.9. 3.. 5.1. 7. 7.9 9. 9.7 3APD CONDENSING UNIT RATINGS, Hz ENGLISH 7 5 9 95 5 1 115 15 3 5. 3.1 9.. 9.9 3. 7. 5.7.3..3.5. 53.1.3 55.7 393. 5.5 377..7 3. 3. 57.9. 51.3 5.3.7.5 9.7. 3.5 1. 39.5 39.1 1...7 9.1 51. 5.1 5. 59.5 1.. 3.1 1.1 1.3 3. 591.1. 57..7 553..1 53. 53. 51. 5. 93.3 5.9 7. 1.7 53.7. 33..5 5. 1.1 5. 3..1...7..1.1 53. 55. 5. 53.9 5.9 513.9 1.7 9.5. 71..5 7.3 717.1 93. 7.7... 57.3 553.9 531.1 7.9..7 7.5 9. 5. 5.7 57.3..7 5. 7. 3APS CONDENSING UNIT RATINGS, Hz ENGLISH 7 5 9 95 5 1 115 15 3 3.7 59.7. 1.9 71..3 53..5..7 17..9 399. 9.1 31. 51. 371.3 5.1 39.9.3 33..5 551.1 53.3 51... 9. 51. 33.9 15.9.3 33. 3. 3.7 1.3 3. 5. 7.9.3 5. 55.3 57. 59.. 37.3 5.3 39.7 55..3 5.. 53.1. 51.1. 95.3 51.3 7. 53. 55.5 5.3 39. 5. 1.3. 5 5. 3.9 3. 1. 1. 3. 59.9 5. 577.5 9. 55. 9. 53.3 5. 515.7 5. 9. 57. 7. 59.3 5.7 1.5 7.1. 5.3. 3.1 599. 577.5 55.3 533. 511. 9. 39.5 1..3..5. 53.1 55. 5.1.1. 3APD CONDENSING UNIT RATINGS, Hz ENGLISH 7 5 9 95 5 1 115 15 3 7.. 59. 5. 57..3 555.1.9 53.5 53.. 5. 3. 5.9... 5.. 7. 31. 7. 53. 3.1 9. 5.5 591.5 573.3 5. 53. 511.7 9. 1. 3..5 9.5 5.1 5.7 57..3 3...9 71.7 71... 9. 9. 5.. 5.9 5. 57. 3... 3. 51..1 559.3 9. 5.1 71. 533.3 7. 5 7.. 7.3 9. 75.5 5. 71. 5.9 7.1 57. 79.5..7 3. 31..1. 9. 59.1 71. 577. 7.. 13. 77. 779. 75. 7.7 7.3 7.9 5.7 37. 15.3.1.9 53.9 5.7 59. 1.9.7 7.7 7. 73.3 7.1 Gross Cooling Capacity ( Btuh) 1. Ratings are based on 15 F superheat and use of R-A. Ratings include suction line losses due to an accumulator. 19

Performance data (cont) 3APS5 CONDENSING UNIT RATINGS, Hz ENGLISH 7 5 9 95 5 1 115 15 3.1.1 5. 51.9 5. 51.7. 1.9 1.5 1.7 1..3 7..3 5. 55.5 5.3 1.1.1 7.3 9. 7. 3.9 5.7.. 39. 51.7 1. 5. 59.5 5.9 57.7 59.7 55.7. 53. 5. 7.9.7.5 71.. 7.1 7.5 7. 7..1 7.7 53. 7.9 55.7 5. 5..7 1.1 5.. 51. 7.1 557. 7. 533.5 7.7 9. 75.5 5 1. 79.3 75. 73. 71. 5.. 3... 553.. 51.3 5. 57.3 5.5.7 5.. 71.7 7. 77.1.. 5.9 53..1 5.5 1. 59. 771. 1.7 77.7.5 719. 7.3 91.9 7.3 1.9 73. 3. 75.9 9.3 7. 3APD7 CONDENSING UNIT RATINGS, Hz ENGLISH 7 5 9 95 5 1 115 15 9. 7.5 53.9 3.7 11.3 59. 57.5 55.3 5.5 1.5 79. 3.5 53.9 57.5.5 3..9 7.3 73. 77..5 3. 77.9 7.3 719.9 97. 73.9...7 57. 555.3 531.7 51.9 55.3 59.. 5..5 7. 75.5 79.. 5..5 15. 7.7 73.9 739. 713.7.1..5.9 55. 5.9 5.3.1 5. 7. 71. 75.3 7.9.7 5.7 9. 915.5 7.9 59. 3.7 7. 77.5 7. 7. 93.9 7. 39.9 5 5.9 5.3.1 5. 7. 71. 75.3 7.9.7 5.7 9. 99.3 9. 931.7 93.1 73.9. 1. 7.1 753.1 7. 9. 5..1 3..9 7.1 73.5 77... 7.5 9.9 3APD CONDENSING UNIT RATINGS, Hz ENGLISH 7 5 9 95 5 1 115 15 3. 57.1..9 775.3 5.1 7.3.5 7. 7.1 7.5 75.9 77.3 79. 5. 3..9.1 3.1 91.5 57.5 95.3 9.7 7.5. 3.9 79.7 779.3 7. 75..9 7. 1.3 5..5.7 7.1 73. 77. 1.3 5. 9. 9.9 9.7 95.7. 957. 5. 9. 9. 93.7 73. 77. 77.1 3..7.3.5 77.. 71.5 9.7 79.3 9. 7.. 5 5.5..9 5. 9. 9. 97.7 73. 93. 77.1 917.5.7 5.5.5 5.. 5. 9.7 79.7 9. 7.1. 11. 19...7 1.3 91.5 99. 97. 7. 7. 1.9 3.9 7.7 71. 75.3 79..5. 9. 9.3 97. 1. 3APD9 CONDENSING UNIT RATINGS, Hz ENGLISH 7 5 9 95 5 1 115 15 3 91..1 91.5.5. 71. 3. 75. 17. 79. 7. 3. 755..3 7.1 9. 99.9 97.9 7.5 1. 9.7. 11. 91.5 95.3 95.. 7.5. 5. 7.7 739. 7.7 3.7. 7. 7.7.9 5. 9.7 9. 99.1.9 7.3 99.9.9 7. 71. 3. 75. 5.9 79. 97.9 3.9 93.. 9.9 9.5 3. 97.. 1.7 5. 5. 773.1 9.9 5 1173..9 1. 71. 9. 75. 7. 79..3 3.9 1.3. 973.9 9.5 93. 97. 9.1 1.7 7.9 5. 39.5 9.9 17. 13.1 1191.3 1153.5 11... 997. 9.9 9. 7.7. 73.1 77. 1. 5. 9.9 9. 9.5 3.3 7.1 111.3 Gross Cooling Capacity ( Btuh) 1. Ratings are based on 15 F superheat and use of R-A. Ratings include suction line losses due to an accumulator.

3APD CONDENSING UNIT RATINGS, Hz ENGLISH 7 5 9 95 5 1 115 15 3 1. 971. 91.7 913.3.5 55.. 79.3 7. 737.9 7. 9. 7.3 79.5 3.7.1 9.7 97.5.5 7.7 111. 11.5 11.5 71. 9. 7.5 3.7 1.7 5. 5.9 97. 9. 9.9 9. 9.9 99. 7.5. 5. 9. 1. 11. 7.7 11.7 7. 7. 117. 1. 1137.. 13. 9. 9.3 9.7 3.9 99.3.1.1 9. 9. 9.5 11.3 95.1 11..3 13.1 5 1315.3 177. 11..9 115. 113. 9.3 53. 1. 977.7 9. 7. 1.. 9. 9.7 99.3.1 9. 11.3 11. 13.1 133.5 7.9 139. 3. 139.3.7 139. 9. 19. 97. 1. 1.7 11.. 11. 111. 11. 11. 1..7. 15.3 3APD115 CONDENSING UNIT RATINGS, Hz ENGLISH 7 5 9 95 5 1 115 15 3 1137.3 79. 1.9.9 7. 91. 3. 95.9.1 1. 95..3 931.3 111.9 9. 117. 1. 13.9 7. 1.7 793. 13. 153.3 115.7 1177.3 1.5 13.5.1. 99.3 951. 915. 77. 1.7 7. 93. 9.1 3.. 11.. 1.1 131. 13. 1375.5. 133. 91.9 19. 97.9 15.. 11.. 1171. 113. 113.1 11.7. 1.5. 13..3 1. 95.3.9 5 13.9. 15.9 91.9 11.1 97.9 13.. 137.. 179. 113. 13. 11.7 119.1 1.5 11.7 13. 99. 1. 5.3.9 133.7 15. 153. 1. 13.1 139.5 13. 19. 139.5 119. 11.9 9. 9.. 5. 1.3 115. 11.1 1.9 13.9 137.7 13. 3APD13 CONDENSING UNIT RATINGS, Hz ENGLISH 7 5 9 95 5 1 115 15 3 19. 91. 15. 97.5 11..1 113. 9. 115. 115. 17...3 1. 9.3 133.1 99.1 139.7 953.3 15. 915.1 1.9 1. 13.9 13. 13.9 1.. 1177.7 11. 9.7 51. 9.9 9.5. 7. 11.3 117. 13. 19. 13. 1.5 17. 153. 15..5 1.3. 17. 113. 17.7 11.3 13. 1. 1337. 19.5 193.7 1. 15. 11.9 1199.5 1.5 115.7 153.7 19. 159. 5 17..5 157.1. 9.3 113. 151. 11.3 15. 1. 159. 19.5 7.3 1. 1. 11.9 131. 1.5 1.9 153.7 115.9 159. 157.5.1 17. 17. 153.7 15.1 155. 17.5 13.3 137.7 133.3.1 9.9 11.3 11. 17.3 13.7 139.1 15. 151. 15.9 1.7 Gross Cooling Capacity ( Btuh) 1. Ratings are based on 15 F superheat and use of R-A. Ratings include suction line losses due to an accumulator. 1

Performance data (cont) 3APD5 CONDENSING UNIT CIRCUIT RATINGS, Hz ENGLISH 7 5 9 95 5 1 115 15 3 15..9 11. 11.7.7..5 9.3 9..1.. 9. 9..3. 11. 1. 1. 13. 13.7 1.3 137..7 133. 9.3 1. 9.9 1..5.3 11. 115.9 11. 111.5 1. 7. 1.. 13. 9. 13.9 93. 1.5 151..9 1. 9.5 11.3.1 13.7. 13.1 11. 17. 11. 1.7 1.3 117. 13. 11. 13..3 1.1 3. 1.7 5 1.1 159. 153.7 1. 13. 13.7 133.5 1.3 13. 11.1 11.9 9. 9... 11. 11.9 1.5 13.1 13. 1.3 1.9 17.9 9. 171.3 9. 15... 11. 15. 11.5 19.3 1.1 13.7 1.7 13.1 13.3 13.3 13.9 17. 1.5 11. 15. 7 5 9 95 5 1 115 15 3 15..9 11. 11.7.7..5 9.3 9..1.. 9. 9..3. 11. 1. 1. 13. 13.7 1.3 137. 133. 1. 1..3 115.9 111.5 7.. 9. 93..7 9.3 9.9.5 11. 11. 1. 1. 13. 13.9 1.5 151..9 1. 9.5 11.3.1 13.7. 13.1 11. 17. 11. 1.7 1.3 117. 13. 11. 13..3 1.1 3. 1.7 5 1.1 159. 153.7 1. 13. 13.7 133.5 1.3 13. 11.1 11.9 9. 9... 11. 11.9 1.5 13.1 13. 1.3 1.9 17.9 171.3 15.. 15. 19.3 13.7 13.1 13.3 17. 11. 9. 9.. 11. 11.5 1.1 1.7 13.3 13.9 1.5 15. 3APD7 CONDENSING UNIT CIRCUIT RATINGS, Hz ENGLISH Gross Cooling Capacity ( Btuh) 1. Ratings are based on 15 F superheat and use of R-A. Ratings include suction line losses due to an accumulator. 7 5 9 95 5 1 115 15 3 11.7 9. 137.5. 133..9 19. 11.5 15.1 1.1 11. 1.7 11. 13. 11. 1.. 1..3 15.3.1 1. 155.5 151. 1. 11.9 137.5 13.9 1. 13.7 119. 11.7 1.1 9..5 11. 11.7 1.3 13. 13. 1.3 15. 15. 1. 19.5.1 1..7 159.5 11.5 15.7 1. 19.9 1. 15.1 13..1 13.9 1.1 1.5 13. 15.3 15.3 15..3 1. 5 13.5. 17.1 11.1 17. 11. 17.5 1.3 159.3 1.9 15.9 13.5 151. 1.1 1.1 1.. 15.5 1.5 1.1 13.1 1.7 197.3 191.5 15.. 17.3 1.5 1.7 15. 1. 15. 139.. 11. 1.1 1. 13. 13. 1. 15.1 15. 1.3 1.9 7 5 9 95 5 1 115 15 3.9 9. 13.7. 13..9 1.3 11.5 1. 1.1. 1.7 115. 13.3 111. 1. 7. 1.7 3. 15.3 99. 15.9 15. 19. 1.9. 13. 131. 1. 1.1 117. 113.. 9..5 11. 11.7 1.3 1.9 13. 1. 1.9 15.5 1.1 17.5.1 1.5.7 157.3 11. 15. 1. 17.7 1. 1. 13. 137. 13. 13.7 1.5 17.5 15. 1. 15. 117. 1. 5.. 175.3 11. 19. 11.7 1.5 1.3 159.3 1.9 153. 13.5 1. 1.1 1.9 1. 137.3 15.5 13. 1. 1. 1.7 193.9 1. 1. 17. 17. 1. 15.7 15.7 1..9 1.. 11. 1.1 1. 13. 13. 1. 15.1 15. 1.3 1.9