Technical Information / Technische Information / Segni / Informacion Tecnica Low Speed High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU 15 Displacements (2.2 24. in 3 /rev) 15 Schluckvolumen 36... 39 cm 3 /rev 15 ylindrée 15 Despazamientos ont Int Maximum Pressure (to18 ) (to 24 ) Eingangsdruck......165 haute de pression max. Presion Maxima Light to Medium Duty Low Speed, High Torque Motor This light to medium duty motor incorporates all the features of heavy duty motors. Design features include a high pressure shaft seal so external drains are never required, roller vane technology for automatic wear compensation, and full flow internal cooling and flushing. This is a very economical motor for most light to medium duty applications. Maximum Oil Flow Schluckstrom Débit d huile audal Maximo de ceite (to 15 gpm)... 57 lpm Maximum Speed (932 rpm) Drehzahl 932 rpm Vitesse de rotation Velocidad Maxima ont Int Maximum Torque (3897 lb in) (4783 lb in) Max Drehmoment 44 Nm 54 Nm ouple Maxi Torque Maximo Maximum Side Load at Key Seitenlast harges latèrales arga Maxima Lateral (to 11 lb)... 49 N 2
Performance Data / Leistungsdaten Puissance / Datos Tecnicos Low Speed, High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU Motor Series T cm 3 /rev in 3 /rev Geometric displacement Geom. Schluckvolumen ylindrée Despazamientos rev/min Max. oil flow Max. Schluckstrom Débit d huile maxi audal Maximo de ceite Max. Differential Pressure Max. Druckgefälle hute de pression maxi Presion diferencial maxima Max. speed @ Max. intermittent flow Max. Drehzahl Intermittierender etrieb: Vitesse de rotation maxi Velocidad maxima a caudal intermitente maximo cont / int* l/min g/min cont / int* max Max. supply pressure Max. Eingangsdruck Pression maxi entrée Presion maxima de alimentacion cont / int* Nm lb-in Max. torque Max. Drehmoment ouple maxi Torque Maximo max KW HP cont / int* Nm lb-in Max. performance Max. Leistungabgabe Puissance de sortie maxi Maximo redinmiento Min. starting torque Min. nlaufmoment ouple min. fourni au dé manrage Torque minimo de arranque T 36 T 45 T 5 T 65 T 8 T 1 T 13 T 165 T 195 T 23 T 26 T 295 T 33 T 365 T 39 36 2.2 41 2.5 49 3. 65 4. 82 5. 98 6. 13 8. 163 1. 195 11.9 228 13.9 26 15.9 293 17.9 328 2. 37 22.6 392 24. 932 785 678 511 49 454 43 343 287 246 216 191 171 151 143 34 34 9 9 34 34 9 9 34 34 9 9 34 34 9 9 34 34 9 9 45 45 12 12 45 57 12 15 45 57 12 15 45 57 12 15 45 57 12 15 45 57 12 15 45 57 12 15 45 57 12 15 45 57 12 15 45 57 12 15 18 24 165 18 24 165 18 24 165 18 24 165 18 24 165 18 24 165 18 24 155 18 225 145 18 21 13 138 15 2 1 131 145 19 97 14 18 93 114 1 165 86 15 1525 83 1 12 145 19 275 19 275 19 275 19 275 19 275 19 275 19 275 19 275 19 275 19 275 19 275 19 275 19 275 19 275 19 275 48.2 67.3 427 596 64.3 88. 569 779 78.3 16.9 693 946 16.9 145.1 946 1284 134.8 183.5 1193 1624 159.4 216.6 1411 1917 22.4 297.4 1951 2632 273.2 345.9 2418 362 34.2 399.6 311 37 316. 427.3 2797 3782 349.8 465.1 396 4117 383.1 498.8 3391 4415 413.2 59. 3657 455 44.3 54.4 3897 4783 428.4 524.5 3792 4642 6.6 8.8 7.2 9.7 7.5 1.1 7.8 1.4 7.8 1.5 1.2 13.8 13.4 18. 12.4 16.7 12. 16.1 11. 14.8 1.5 14.1 1. 13.4 9.1 12.2 8.7 11.6 7.8 1.5 43.5 49.7 385 44 39 52 341 461 36 7 319 619 66 99 582 875 92 139 816 1226 119 158 15 14 167 229 1482 224 199 263 176 2331 27 325 2388 2872 261 3 24 3121 291 395 2573 3498 38 4 2724 44 332 46 2942 9 372 454 3296 421 339 434 33 3845 Performance data based on testing using 1W4 oil with a viscosity of 43,1 cst. (2 S) at 54 (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 (13 F). es donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Leistungsdaten sind gemessen mit SE 1W4 bei einer Viskositaet von 43,1 st bei 54. Geringfuegige bweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. * Intermittent operation rating applies to 1% of every minute. Intermittierende Werte maximal 1% von jeder etriebsminute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. apacidad de funcionamiento intermitente valida para 1% por cada minuto. 21
Performance Data / Leistungsdaten Puissance / Datos Tecnicos Low Speed High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU T 36 2 5 1 15 2 25 3 34 4 45 8.5 1 2 3 4 5 7 9 12 7 7 6 5 4 3 2 165 14 1 2 4 6 8 1 12 14 1 7 Torque [lb/in] 6 5 4 3 24 2 18 15 2 1 1 5 2 4 6 8 1 12 14 T 45 1 2 5 1 15 2 25 3 34.5 1 9 2 3 4 5 7 9 9 8 165 8 7 24 7 6 5 4 3 14 1 7 6 5 4 3 2 18 15 1 2 2 1 1 5 1 2 3 4 5 6 7 8 T 5 2 5 1 15 2 25 3 34 12 1 8 6 4 165 14 1 7 1 2 3 4 5 6 7 8.5 1 2 3 4 5 7 9 1 9 8 7 6 5 4 3 24 2 18 15 1 2 2 1 5 1 2 3 4 5 6 7 ont. Int. Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. 1 2 3 4 5 6 7 Intermittierende Werte maximal 1% von jeder etriebsminute. apacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 (13 F). es donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Leistungsdaten sind gemessen mit SE 1W4 bei einer Viskositaet von 43,1 st bei 54. Geringfuegige bweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 22
Performance Data / Leistungsdaten Puissance / Datos Tecnicos Low Speed, High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU T 65 2 5 1 15 2 25 3 34 16.5 1 14 2 3 4 5 7 9 14 165 12 24 12 14 1 2 1 8 6 4 1 7 8 6 4 18 15 1 2 2 5 1 2 3 4 5 55 1 2 3 4 5 55 T 8 2 5 1 15 2 25 3 34 2 18 16 14 12 1 8 6 4 2 5 1 15 2 25 3 4 45 T 1 2 5 1 15 2 25 3 4 45 24 22 2 18 16 14 12 1 8 6 4 2 5 1 15 2 25 3 4 45 5 165 14 1 7 165 14 1 7.5 1 2 3 4 5 7 9 18 16 14 12 1.5 1 2 3 4 5 7 9 12 2 18 24 16 2 14 18 12 1 24 2 18 15 8 6 1 4 2 5 5 1 15 2 25 3 4 45 15 8 6 1 4 2 5 5 1 15 2 25 3 4 45 5 ont. Int. Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Intermittierende Werte maximal 1% von jeder etriebsminute. apacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 (13 F). es donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Leistungsdaten sind gemessen mit SE 1W4 bei einer Viskositaet von 43,1 st bei 54. Geringfuegige bweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 23
Performance Data / Leistungsdaten Puissance / Datos Tecnicos Low Speed High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU T 13 T 165 2 5 1 15 2 25 3 4 45 57 3 25 2 15 1 5 5 1 15 2 25 3 4 45 2 5 1 15 2 25 3 4 45 57 4 3 25 2 15 1 5 5 1 15 2 25 3 T 195 2 5 1 15 2 25 3 4 45 57 45 4 3 25 2 15 1 5 5 1 15 2 25 3 ont. Int. Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. 165 14 1 7 155 1 7 145 1 7.5 1 2 3 4 5 7 9 12 15 28 26 24 22 2 18 16 14 12 1 18 15 12 24 2 18 15 8 1 6 4 2 5 5 1 15 2 25 3 4 45.5 1 2 3 4 5 7 9 12 15 33 3 27 225 24 21 18 15 1 9 6 3 5 5 1 15 2 25 3.5 1 2 3 4 5 7 9 12 15 375 325 3 21 275 25 18 225 2 15 175 15 1 1 75 5 25 5 5 1 15 2 25 3 Intermittierende Werte maximal 1% von jeder etriebsminute. apacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 (13 F). es donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Leistungsdaten sind gemessen mit SE 1W4 bei einer Viskositaet von 43,1 st bei 54. Geringfuegige bweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 24
Performance Data / Leistungsdaten Puissance / Datos Tecnicos Low Speed, High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU T 23 2 5 1 15 2 25 3 4 45 57 5.5 1 4 2 3 4 5 7 9 12 15 45 4 3 25 2 15 1 138 13 7 3 25 2 15 1 2 15 1 5 5 5 5 1 15 2 25 T 26 2 5 1 15 2 25 3 4 45 57 5 4 131 5 1 15 2 25.5 1 2 3 4 5 7 9 12 15 45 4 19 3 2 1 7 3 25 2 15 145 1 1 1 5 5 2 4 6 8 1 12 14 16 18 2 22 2 4 6 8 1 12 14 16 18 2 22 T 295 2 5 1 15 2 25 3 4 45 57 6.5 1 5 2 3 4 5 7 9 12 15 45 5 4 3 2 97 7 Torque [lb/in] 4 3 25 2 15 18 14 1 1 1 5 5 2 4 6 8 1 12 14 16 18 2 2 4 6 8 1 12 14 16 18 2 ont. Int. Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Intermittierende Werte maximal 1% von jeder etriebsminute. apacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 (13 F). es donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Leistungsdaten sind gemessen mit SE 1W4 bei einer Viskositaet von 43,1 st bei 54. Geringfuegige bweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 25
Performance Data / Leistungsdaten Puissance / Datos Tecnicos Low Speed High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU T 33 2 5 1 15 2 25 3 4 45 57 6.5 1 5 2 3 4 5 7 9 12 15 45 5 4 3 2 114 93 7 4 3 25 2 15 165 1 1 1 1 5 5 2 4 6 8 1 12 14 16 18 T 37 2 5 1 15 2 25 3 4 45 57 6 2 4 6 8 1 12 14 16 18.5 1 2 3 4 5 7 9 12 15 5 5 4 3 2 15 86 7 45 4 3 25 2 15 1525 1 1 1 5 5 2 4 6 8 1 12 14 16 2 4 6 8 1 12 14 16 T 39 2 5 1 15 2 25 3 4 45 57 6.5 1 5 2 3 4 5 7 9 12 15 5 4 3 2 1 83 7 45 4 3 25 2 15 145 12 1 1 1 5 5 2 4 6 8 1 12 14 15 ont. Int. Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. 2 4 6 8 1 12 14 15 Intermittierende Werte maximal 1% von jeder etriebsminute. apacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 (13 F). es donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Leistungsdaten sind gemessen mit SE 1W4 bei einer Viskositaet von 43,1 st bei 54. Geringfuegige bweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 26
Radial Load / Radiale Wellenbelastung harges Radiale / arga Radial Low Speed, High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU Shaft Side Load apacity N (lb) 8896 (2) 87 (18) 7117 (16) 6228 (14) 5338 (12) 4448 (1) 59 (8) 2669 (6) 1779 (4) 89 (2). 2. 4. 6. 8. Speed (RPM).5 In. 1. In. 1.5 In. The allowable side load curve is based on bushing life of 2.5 x 1 6 revolutions. Die zulaessige radiale Wellenbelastung bezieht sich auf die Lager-Lebensdauer 2,5 x 1 6 Umdrehungen. L effort radial admissible sur l arbre depend a une duree de vie 2,5 x 1 6 de rotation. La curva de carga lateral admisible se basa en vida util de cojinete de 2.5 x 1 revoluciones. 12.7 (.5) 25.4 (1.) 38.1 (1.5) English equivalents for metric specifications are shown in ( ). 27
Mounting / Gehäuse arter / Montaje Low Speed High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU ode: SE 2-olt L 48.3 (1.9) 2.55 (.1) 14.2 (.56) 48.26 (1.9) 48.27 (1.94) ø 95.5 (3.76) ø 82.5 / 82.55 (3.248 / 3.25) 127.3 (5.1) 13.69 / 13.28 (.539 /.523) ø 16.38 (4.188) ode disp. 36 45 5 65 8 1 13 165 195 23 26 295 33 365 39 Weight/Gewicht kg 5.87 6.3 6.12 6.26 6. 6.49 6.76 7.3 7. 7.58 7.8 8.7 8. 8.66 8.8 Poids/Peso (lb) (12.9) (13.3) (13.5) (13.8) (14.) (14.3) (14.9) (15.5) (16.2) (16.7) (17.2) (17.8) (18.4) (19.1) (19.4) Length"L" mm 132.4 136 138 141 144 147 154 16 166 173 179 185 192 2 25 "L" (in) (5.22) (5.36) (5.42) (5.54) (5.67) (5.79) (6.4) (6.29) (6.54) 6.79 7.4 7.29 7.54 7.88 8.4 ode: SE 2-olt, Long Pilot "L" 43.6 (1.72) 7.18 (.28) 14.2 (.56) 48.26 (1.9) 48.27 (1.94) Ø 95.5 (3.76) Ø 82.5 / 82.55 (3.248 / 3.25) 127.3 (5.1) 13.69 / 13.28 (.539 /.523) ø 16.38 (4.188) ode disp. 36 45 5 65 8 1 13 165 195 23 26 295 33 365 39 Weight/Gewicht kg 5.87 6.3 6.12 6.26 6. 6.49 6.76 7.3 7. 7.58 7.8 8.7 8. 8.66 8.8 Poids/Peso (lb) (12.9) (13.3) (13.5) (13.8) (14.) (14.3) (14.9) (15.5) (16.2) (16.7) (17.2) (17.8) (18.4) (19.1) (19.4) Length "L" mm 132.4 131 133 136 139 142 149 155 161 168 174 18 187 195 2 "L" (in) (5.22) (5.18) (5.24) (5.36) (5.49) (5.61) (5.86) (6.11) (6.36) (6.61) (6.86) (7.11) (7.36) (7.7) (7.86) English equivalents for metric specifications are shown in ( ). 28
Mounting / Gehäuse arter / Montaje Low Speed, High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU ode: F 4-olt "L" 48.3 (1.9) 2.55 (.1) 48.26 (1.9) 45 ø 95.5 (3.76) ø 44.4 / 44.45 (1.748 / 1.75) 2 x 56.9 (2.24) ø 82.55 (3.25) 3/8-16 UN 48.27 (1.94) ode F disp. 36 45 5 65 8 1 13 165 195 23 26 295 33 365 39 Weight/Gewicht kg 5.58 5.62 5.67 5.8 5.94 6.8 6.31 6.62 7.3 7.17 7.39 7.62 7.94 8.26 8.39 Poids/Peso (lb) (12.3) (12.4) (12.5) (12.8) (13.1) (13.4) (13.9) (14.6) (15.5) (15.8) (16.3) (16.8) (17.5) (18.2) (18.5) Length "L" mm 132.4 136 138 141 144 147 154 16 166 173 179 185 192 2 25 "L" (in) (5.22) (5.36) (5.42) (5.54) (5.67) (5.79) (6.4) (6.29) (6.54) (6.79) (7.4) (7.29) (7.54) (7.88) (8.4) ode: M Magneto L 48.3 (1.9) 2.55 (.1) 14.2 (.56) 13.69 / 13.28 (.539 /.523) 45 22 3' ø 95.5 (3.76) ø 82.5 / 82.55 (3.248 / 3.25) 133. (5.25) 48.26 (1.9) 48.27 (1.94) ø 16.38 (4.188) ode M disp. 36 45 5 65 8 1 13 165 195 23 26 295 33 365 39 Weight/Gewicht kg 5.58 6.3 6.4 6.53 6.62 6.76 7.3 7.3 7.62 7.85 8.12 8. 8.62 8.94 9.7 Poids/Peso (lb) (12.3) (13.9) (14.1) (14.4) (14.6) (14.9) (15.5) (16.1) (16.8) (17.3) (17.9) (18.4) (19.) (19.7) (2.) Length "L" mm 132.4 136 138 141 144 147 154 16 166 173 179 185 192 2 25 "L" (in) (5.22) (5.36) (5.42) (5.54) (5.67) (5.79) (6.4) (6.29) (6.54) (6.79) (7.4) (7.29) (7.54) (7.88) (8.4) English equivalents for metric specifications are shown in ( ). 29
Ports / nschlüße Orifices / Lumbreras Low Speed High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU ode: S 45.72 (1.8) 7/8"-14 SE O-Ring 2 x 22.86 (.9) 7/8-14 SE O-Ring ode: P 45.72 (1.8) 1/2"-14 NPTF 2 x 22.86 (.9) 1/2-14 NPTF ode: M Manifold 4 x 5/16-18 UN 12.7 (.5) 45.7 (1.8) 63.5 (2.5) 28.56 (1.) 2 x 31.75 (1.25) 2 x 14.28 (.562) - - Motor with manifold mount is supplied with 2 O-rings. Zum Motor mit Universalanschluß werden 2 O-Ringe geliefert. Deux joints toriques sont livrés avec les moteurs a plan de raccordement universel. Il blocchetto connessioni è corredato da 2 OR. English equivalents for metric specifications are shown in ( ). 3
Rear Ports / Endanschluß limentazione Laterale / Orifices arriér Low Speed, High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU ode: R 3/4"-16 SE O-Ring 16.3 (.64) 31. (1.22) 3/4-16 UNF Straight thd O-Ring Ports 24.4 (.96) "L" + 21. (.83) "W" +.18kg (.4 lb) ode: Y G 1/2 16.3 (.64) G 1/2 31. (1.22) 24.4 (.96) "L" + 21. (.83) "W" +.18kg (.4 lb) See page 28 and 29 for length " L " & weights "W". Längen " L " / Gewichte "W" siehe Seite 28...29. Voir page 28-29 pour les longueurs L et les poids W onsultar en la Página 28-29 los valores de largo L y peso W. English equivalents for metric specifications are shown in ( ). 31
Shafts / btriebswellen rbre / Ejes Low Speed High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU ode ode M ode ode F ode: 9 1" Straight with.38" rosshole 49.3 (1.94) 44.7 (1.76) ode: 1 1" Keyed ode: 21 orrosion Resistant 5 (1.96) 44.7 (1.76) ode: 11 1" 6 Spline 49.5 (1.95) 44.7 (1.76) ode: 13 Long 1" Keyed 54.1 (2.13) 49.3 (1.94) English equivalents for metric specifications are shown in ( ). 32
Shafts / btriebswellen rbre / Ejes Low Speed, High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU ode: 9 ø 9.53 / 9.91 (.375 /.39) 1" Straight with.38" rosshole 14.52 (.571) 13.51 (.531) 38.6 (1.52) ø 25.37 / 25.4 (.999 / 1.) ode: 1 19. (.748) 1" Keyed ode: 21 orrosion Resistant 1/4 x 1 SE J52 28.3 (1.114) 27.64 (1.88 ) 1/4-2 UN (15.8).62 38.6 (1.52) ø 27.97 (1.11) 6.37 (.251) 6. (.25) ø 25.37 / 25.4 (.999 / 1.) 6 SE J499 ode: 11 1" 6 Spline 25.4 (1.) MIN 38.6 (1.52) ø 25.32 (.997) 25.2 (.985) 1/4-2 UN 15.8 (.62) 1.32 (.52) 1.17 (.46) 4.88 (.192) 6 o 6.27 (.246) 6.2 (.244) ø 21.54 (.848) 21.29 (.838) ode: 13 Long 1" Keyed 1.24 (.49) 19. (.748) 1/4 x 1 SE J52 ø 28.3 (1.14) 27.64 (1.88) 6.37 (.251) 6. (.25) 43.2 (1.7) 1.32 (.52) 1.17 (.46) ø 25.37 / 25.4 (.999 / 1.) English equivalents for metric specifications are shown in ( ). 33
Shafts / btriebswellen rbre / Ejes Low Speed High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU ode ode M ode ode F ode: 25 1" Tapered 66 (2.59) 62.3 (2.45) ode: 26 25mm Keyed with 8mm Key 55 (2.17) 5.4 (1.98) ode: 28 7/8" 13 Tooth Spline 45.9 (1.81) 41.4 (1.63) English equivalents for metric specifications are shown in ( ). 34
Shafts / btriebswellen rbre / Ejes Low Speed, High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU ode: 25 1" Tapered 1/4x1 SE J52 3/4x16 UNF Md= 24-3Nm 175-225 Ft Lbs ø 25.37 (.999) 25.4 (1.) 1:8 3 (.118) 6.37 (.251) 6. (.25) 25.4 (1.) 45.5 (1.793) ode: 26 25mm Keyed with 8mm Key Key 8 x 7 x 23 mm ø25.15 (.98) 25.2 (.98) M8 x 1.25 19 (.75) 8. (.315) 7.96 (.313) 42.6 (1.677) ode: 28 7/8" 13 Tooth Spline 17.8 (.7) MIN ø 22.15 (.872) 21.9 (.862) SE J498 16/32 Spline 18.2 (.715) 17.9 (.75) English equivalents for metric specifications are shown in ( ).
Ordering Information / estellschlüssel System de ommande / Imformacion para pedidos Low Speed High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU T XXXX X X XX X XXXX Series Displacement Schluckvolumen ylindrée Desplazamiento Mounting Gehäuse arter Montaje Ports nschluß Plan de raccordement Lumbreras Shaft Welle rbre Eje Rotation Drehrichtung Direction de rotation Rotacion Options Opciones cm 3 /U / cm 3 /rev ode cm 3 /tr / cm 3 /giro 36 2.2 / 36 45 2.5 / 41 5 3. / 49 65 4. / 65 8 5. / 82 1 6. / 98 13 8. / 13 165 1. / 163 195 11.9 / 195 23 13.9 / 228 26 15.9 / 26 295 17.9 / 293 33 2. / 328 365 22.6 / 37 39 24. / 392 ode P S M 1/2-14 NPTF 7/8-14 SE 5/16-18 UN Manifold Endanschluß Rear Ports limentazione Laterale Orifices arriér vail. ode Rotation vail. Standard Reverse 1 Timed Manifold ode Shaft vail. 1" Straight 9 w/.38" rosshole 1 11 1" Keyed 1" 6 Spline ode Mounting vail. SE "" 2 olt 13 Long 1" Keyed 4 olt ode 3/4-16 SE "O-Ring" xial vail. 1" Keyed; 21 orrosion Resistant F R 25 1" Tapered Magneto G 1/2 25mm Keyed 26 w/ 8mm Key M Y 28 7/8" 13 Tooth Spline SE "" 2 olt, Long Pilot Standard Euro Standard ode No Paint No lackiert lack Paint Schwarz lackiert vail. See Page 73 for dditional Options 36
Notes / Hinweis Remarques / Notas Low Speed, High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU 37