Technical Information / Technische Information / Segni / Informacion Tecnica

Technical Information / Technische Information / Segni / Informacion Tecnica zm2 T Series / Serie / Série HY13-159-4/,EU 15 Displacements (2.2 24. in 3 /rev) 15 Schluckvolumen 36... 39 cm 3 /rev 15 Cylindrée 15 Despazamientos Cont Int Maximum Pressure (to18 ) (to 24 ) Eingangsdruck......165 Chaute de pression max. Presion Maxima Light to Medium Duty Low Speed, High Torque Motor This light to medium duty motor incorporates all the features of heavy duty motors. Design features include a high pressure shaft seal so external drains are never required, roller vane technology for automatic wear compensation, and full flow internal cooling and flushing. This is a very economical motor for most light to medium duty applications. Maximum Oil Flow Schluckstrom Débit d huile Caudal Maximo de ceite (to 15 gpm)... 57 lpm Maximum Speed (932 rpm) Drehzahl 932 rpm Vitesse de rotation Velocidad Maxima Cont Int Maximum Torque (3897 lb in) (4783 lb in) Max Drehmoment 44 Nm 54 Nm Couple Maxi Torque Maximo Maximum Side Load at Key Seitenlast Charges latèrales Carga Maxima Lateral (to 11 lb)... 49 N pp 2- T SD.p65 2 Parker Hannifin Corporation

Performance Data / Leistungsdaten Puissance / Datos Tecnicos T Series / Serie / Série HY13-159-4/,EU Motor Series T cm 3 /rev in 3 /rev Geometric displacement Geom. Schluckvolumen Cylindrée Despazamientos rev/min Max. oil flow Max. Schluckstrom Débit d huile maxi Caudal Maximo de ceite Max. Differential Pressure Max. Druckgefälle Chute de pression maxi Presion diferencial maxima Max. speed @ Max. intermittent flow Max. Drehzahl Intermittierender etrieb: Vitesse de rotation maxi Velocidad maxima a caudal intermitente maximo cont / int* l/min g/min cont / int* max Max. supply pressure Max. Eingangsdruck Pression maxi entrée Presion maxima de alimentacion cont / int* Nm lb-in Max. torque Max. Drehmoment Couple maxi Torque Maximo max KW HP cont / int* Nm lb-in Max. performance Max. Leistungabgabe Puissance de sortie maxi Maximo redinmiento Min. starting torque Min. nlaufmoment Couple min. fourni au dé manrage Torque minimo de arranque T 36 T 45 T 5 T 65 T 8 T 1 T 13 T 165 T 195 T 23 T 26 T 295 T 33 T 365 T 39 36 2.2 41 2.5 49 3. 65 4. 82 5. 98 6. 13 8. 163 1. 195 11.9 228 13.9 26 15.9 293 17.9 328 2. 37 22.6 392 24. 932 85 678 511 49 454 43 343 287 246 216 191 171 151 143 34 34 9 9 34 34 9 9 34 34 9 9 34 34 9 9 34 34 9 9 45 45 12 12 165 18 24 165 18 24 165 18 24 165 18 24 165 18 24 165 18 24 165 18 24 155 18 225 145 18 21 13 138 1 2 1 131 145 19 97 14 18 93 114 1 165 86 15 1525 83 1 12 145 19 275 19 275 19 275 19 275 19 275 19 275 19 275 19 275 19 275 19 275 19 275 19 275 19 275 19 275 19 275 48.2 67.3 427 596 64.3 88. 526 731 78.3 16.9 693 946 16.9 145.1 946 1284 134.8 183.5 1193 1624 159.4 216.6 1411 1917 22.4 297.4 1951 2632 273.2 345.9 2418 362 34.2 399.6 311 37 316. 427.3 2797 3782 349.8 465.1 396 4117 383.1 498.8 3391 4415 413.2 59. 3657 455 44.3 54.4 3897 4783 428.4 524.5 3792 4642 6.6 8.8 7.2 9.7 7.5 1.1 7.8 1.4 7.8 1.5 1.2 13.8 13.4 18. 12.4 16.7 12. 16.1 11. 14.8 1.5 14.1 1. 13.4 9.1 12.2 8.7 11.6 7.8 1.5 43.5 49.7 385 44 39 52 341 461 36 7 319 619 66 99 582 977 92 139 816 1226 119 158 15 14 167 229 1482 224 199 263 176 2331 27 325 2388 2872 261 3 24 3121 291 395 2573 3498 38 4 2724 44 332 46 2942 9 372 454 3296 421 339 434 33 3845 Performance data based on testing using 1W4 oil with a viscosity of 43,1 cst. (2 S) at 54 C (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Leistungsdaten sind gemessen mit SE 1W4 bei einer Viskositaet von 43,1 Cst bei 54 C. Geringfuegige bweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. pp 2- T SD.p65 * Intermittent operation rating applies to 1% of every minute. Intermittierende Werte maximal 1% von jeder etriebsminute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. 21 Parker Hannifin Corporation

Ordering Information / estellschlüssel System de Commande / Imformacion para pedidos T Series / Serie / Série HY13-159-4/,EU T XXXX XX XX XXXX Series Displacement Schluckvolumen Cylindrée Desplazamiento Mounting/Ports Gehäuse/nschluß Carter/Plan de raccordement Montaje/Lumbreras Shaft Welle rbre Eje Rotation Drehrichtung Direction de rotation Rotacion Options Opciones cm 3 /U cm 3 /tr Code cm 3 /giro cu in 3 /rev 36 36 / 2.2 45 41 / 2.5 5 49 / 3. 65 65 / 4. 8 82 / 5. 1 98 / 6. 13 13 / 8. 165 163 / 1. 195 195 / 11.9 23 228 / 13.9 26 26 / 15.9 295 293 / 17.9 33 238 / 2. 365 37 / 22.6 39 392 / 24. Code Mounting vail. SE "" 2 olt, 5/16-18 UNC Manifold M SE "" 2 olt, P 1/2-14 NPTF SE "" 2 olt, 7/8-14 SE S Code Standard Code Shaft 1" Straight 9 w/.38" Crosshole 1 11 1" Keyed 1" 6 Spline Rotation FM 4 olt, 1/2-14 NPTF 13 Long 1" Keyed 1" Keyed; 21 Corrosion Resistant 4 olt, 1/2-14 NPTF FP 26 25mm Keyed w/ 8mm Key 4 olt, 7/8-14 SE 28 7/8" 13 Tooth Spline FS Code Options No Paint No lackiert lack Paint Schwarz lackiert Consult factory for other available options, configurations ordering codes and lead times. pp 2- T SD.p65 22 Parker Hannifin Corporation

Performance Data / Leistungsdaten Puissance / Datos Tecnicos T Series / Serie / Série HY13-159-4/,EU T 36 2 5 1 15 2 25 3 34 4 45 8.5 1 2 3 4 5 7 9 12 7 7 6 5 4 3 2 165 14 1 2 4 6 8 1 12 14 1 7 Torque [lb/in] 6 4 3 24 2 18 1 2 1 1 2 4 6 8 1 12 14 T 45 1 2 5 1 15 2 25 3 34 9 165 8 7 14 6 5 1 4 3 7 2 1 1 2 3 4 6 7 8 T 5 2 5 1 15 2 25 3 34 12 1 165 8 6 4 14 1 7.5 1 2 3 4 5 7 9 9 8 24 7 6 2 18 1 4 3 1 2 1 1 2 3 4 6 7 8.5 1 2 3 4 5 7 9 1 9 8 7 6 4 3 24 2 18 1 1 2 2 1 1 2 3 4 6 7 Cont. Int. Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. 1 2 3 4 6 7 Intermittierende Werte maximal 1% von jeder etriebsminute. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 C (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. pp 2- T SD.p65 Leistungsdaten sind gemessen mit SE 1W4 bei einer Viskositaet von 43,1 Cst bei 54 C. Geringfuegige bweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 23 Parker Hannifin Corporation

Performance Data / Leistungsdaten Puissance / Datos Tecnicos T Series / Serie / Série HY13-159-4/,EU T 65 2 5 1 15 2 25 3 34 16.5 1 14 2 3 4 5 7 9 14 165 12 24 12 14 1 2 1 8 6 4 1 7 8 6 4 18 1 1 2 2 1 2 3 4 55 1 2 3 4 55 T 8 2 5 1 15 2 25 3 34 2 18 16 14 12 1 8 6 4 2 5 1 15 2 25 3 4 45 T 1 2 5 1 15 2 25 3 4 45 24 22 2 18 16 14 12 1 8 6 4 2 5 1 15 2 25 3 4 45 165 14 1 7 165 14 1 7.5 1 2 3 4 5 7 9 18 16 14 12 1.5 1 2 3 4 5 7 9 12 2 18 24 16 2 14 18 12 1 24 2 18 1 8 6 1 4 2 5 1 15 2 25 3 4 45 1 8 6 1 4 2 5 1 15 2 25 3 4 45 Cont. Int. Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Intermittierende Werte maximal 1% von jeder etriebsminute. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 C (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. pp 2- T SD.p65 Leistungsdaten sind gemessen mit SE 1W4 bei einer Viskositaet von 43,1 Cst bei 54 C. Geringfuegige bweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 24 Parker Hannifin Corporation

Performance Data / Leistungsdaten Puissance / Datos Tecnicos T Series / Serie / Série HY13-159-4/,EU T 13 T 165 2 5 1 15 2 25 3 4 3 25 2 15 1 5 5 1 15 2 25 3 4 45 2 5 1 15 2 25 3 4 45 57 4 3 25 2 15 1 5 5 1 15 2 25 3 T 195 2 5 1 15 2 25 3 4 45 4 3 25 2 15 1 5 5 1 15 2 25 3 Cont. Int. Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. 165 14 1 7 155 1 7 145 1 7.5 1 2 3 4 5 7 9 12 15 28 26 24 22 2 18 16 14 12 1 18 1 24 2 18 1 8 1 6 4 2 5 1 15 2 25 3 4 45.5 1 2 3 4 5 7 9 12 15 33 3 27 225 24 21 18 1 12 1 9 6 3 5 1 15 2 25 3.5 1 2 3 4 5 7 9 12 15 375 3 325 3 21 275 2 18 225 2 1 175 1 1 1 75 25 5 1 15 2 25 3 Intermittierende Werte maximal 1% von jeder etriebsminute. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 C (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. pp 2- T SD.p65 Leistungsdaten sind gemessen mit SE 1W4 bei einer Viskositaet von 43,1 Cst bei 54 C. Geringfuegige bweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 25 Parker Hannifin Corporation

Performance Data / Leistungsdaten Puissance / Datos Tecnicos T Series / Serie / Série HY13-159-4/,EU T 23 2 5 1 15 2 25 3 4 45 57.5 1 4 2 3 4 5 7 9 12 15 45 4 3 25 2 15 1 138 13 7 3 3 2 2 1 1 2 1 1 5 5 1 15 2 25 T 26 2 5 1 15 2 25 3 4 5 1 15 2 25.5 1 2 3 4 5 7 9 4 4 4 131 3 19 3 2 1 7 3 2 2 1 145 1 1 1 2 4 6 8 1 12 14 16 18 2 22 2 4 6 8 1 12 14 16 18 2 22 T 295 2 5 1 15 2 25 3 4 45 57 6.5 1 2 3 4 5 7 9 12 15 4 4 3 2 97 7 Torque [lb/in] 4 3 3 2 2 1 18 14 1 1 1 2 4 6 8 1 12 14 16 18 2 2 4 6 8 1 12 14 16 18 2 Cont. Int. Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Intermittierende Werte maximal 1% von jeder etriebsminute. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 C (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. pp 2- T SD.p65 Leistungsdaten sind gemessen mit SE 1W4 bei einer Viskositaet von 43,1 Cst bei 54 C. Geringfuegige bweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 26 Parker Hannifin Corporation

Performance Data / Leistungsdaten Puissance / Datos Tecnicos T Series / Serie / Série HY13-159-4/,EU T 33 2 5 1 15 2 25 3 4 45 57 6.5 1 2 3 4 5 7 9 12 15 4 4 3 2 114 93 7 4 3 3 2 2 1 165 1 1 1 1 2 4 6 8 1 12 14 16 18 T 37 2 5 1 15 2 25 3 4 45 57 6 2 4 6 8 1 12 14 16 18.5 1 2 3 4 5 7 9 12 15 4 3 2 15 86 7 4 4 3 3 2 2 1 1525 1 1 1 2 4 6 8 1 12 14 16 2 4 6 8 1 12 14 16 T 39 2 5 1 15 2 25 3 4 45 57 6.5 1 2 3 4 5 7 9 12 15 4 3 2 1 83 7 4 4 3 3 2 2 1 145 12 1 1 1 2 4 6 8 1 12 14 15 Cont. Int. Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. 2 4 6 8 1 12 14 15 Intermittierende Werte maximal 1% von jeder etriebsminute. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 C (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. pp 2- T SD.p65 Leistungsdaten sind gemessen mit SE 1W4 bei einer Viskositaet von 43,1 Cst bei 54 C. Geringfuegige bweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 27 Parker Hannifin Corporation

Radial Load / Radiale Wellenbelastung Charges Radiale / Carga Radial T Series / Serie / Série HY13-159-4/,EU Shaft Side Load Capacity N (lb) 8896 (2) 87 (18) 7117 (16) 6228 (14) 5338 (12) 4448 (1) 59 (8) 2669 (6) 1779 (4) 89 (2). 2. 4. 6. 8. Speed (RPM).5 In. 1. In. 1.5 In. The allowable side load curve is based on bushing life of 2.5 x 1 6 revolutions. Die zulaessige radiale Wellenbelastung bezieht sich auf die Lager-Lebensdauer 2,5 x 1 6 Umdrehungen. L effort radial admissible sur l arbre depend a une duree de vie 2,5 x 1 6 de rotation. La curva de carga lateral admisible se basa en vida util de cojinete de 2.5 x 1 revoluciones. 12.7 (.5) 25.4 (1.) 38.1 (1.5) English equivalents for metric specifications are shown in ( ). pp 2- T SD.p65 28 Parker Hannifin Corporation

Mounting,Ports/Gehäuse,nschlüße Carter,Orifices / Montaje,Lumbreras T Series / Serie / Série HY13-159-4/,EU Code: M SE 2-olt, 5/16-18 UNC Manifold L 48.3 (1.9) 4 x 5/16-18 UNC 12.7 (.5) 2.55 (.1) 14.2 (.56) 63.5 (2.) 48.26 (1.9) 48.27 (1.94) - - ø 95.5 (3.76) 45.7 (1.8) 28.56 (1.) ø 82.5 / 82.55 (3.248 / 3.25) 2 x 31.75 (1.25) 2 x 14.28 (.562) Motor with manifold mount is supplied with 2 O-rings. Zum Motor mit Universalanschluß werden 2 O-Ringe geliefert. Deux joints toriques sont livrés avec les moteurs a plan de raccordement universel. Il blocchetto connessioni è corredato da 2 OR. 127.3 (5.1) 13.69 / 13.28 (.539 /.523) ø 16.38 (4.188) Code M disp. 36 45 5 65 8 1 13 165 195 23 26 295 33 365 39 Weight/Gewicht kg 5.87 6.3 6.12 6.26 6. 6.49 6.76 7.3 7. 7.58 7.8 8.7 8. 8.66 8.8 Poids/Peso (lb) (12.9) (13.3) (13.5) (13.8) (14.) (14.3) (14.9) (15.5) (16.2) (16.7) (17.2) (17.8) (18.4) (19.1) (19.4) Length"L" mm 132.4 136 138 141 144 147 154 16 166 173 179 185 192 2 25 "L" (in) (5.22) (5.36) (5.42) (5.54) (5.67) (5.79) (6.4) (6.29) (6.54) 6.79 7.4 7.29 7.54 7.88 8.4 Code: P SE 2-olt, 1/2-14 NPTF L 48.3 2.55 (.1) (1.9) 48.26 14.2 (.56) (1.9) 45.72 (1.8) 48.27 (1.94) ø 95.5 (3.76) ø 82.5 / 82.55 (3.248 / 3.25) 127.3 (5.1) 1/2-14 NPTF 2 x 22.86 (.9) 13.69 / 13.28 (.539 /.523) ø 16.38 (4.188) Code P disp. 36 45 5 65 8 1 13 165 195 23 26 295 33 365 39 Weight/Gewicht kg 5.87 6.3 6.12 6.26 6. 6.49 6.76 7.3 7. 7.58 7.8 8.7 8. 8.66 8.8 Poids/Peso (lb) (12.9) (13.3) (13.5) (13.8) (14.) (14.3) (14.9) (15.5) (16.2) (16.7) (17.2) (17.8) (18.4) (19.1) (19.4) Length"L" mm 132.4 136 138 141 144 147 154 16 166 173 179 185 192 2 25 "L" (in) (5.22) (5.36) (5.42) (5.54) (5.67) (5.79) (6.4) (6.29) (6.54) 6.79 7.4 7.29 7.54 7.88 8.4 English equivalents for metric specifications are shown in ( ). pp 2- T SD.p65 29 Parker Hannifin Corporation

Mounting,Ports/Gehäuse,nschlüße Carter,Orifices / Montaje,Lumbreras T Series / Serie / Série HY13-159-4/,EU Code: S SE 2-olt, 7/8"-14 SE O-Ring L 48.3 2.55 (.1) (1.9) 48.26 14.2 (.56) (1.9) 45.72 (1.8) 48.27 (1.94) ø 95.5 (3.76) ø 82.5 / 82.55 (3.248 / 3.25) 127.3 (5.1) 7/8-14 SE O-Ring 2 x 22.86 (.9) 13.69 / 13.28 (.539 /.523) ø 16.38 (4.188) Code S disp. 36 45 5 65 8 1 13 165 195 23 26 295 33 365 39 Weight/Gewicht kg 5.87 6.3 6.12 6.26 6. 6.49 6.76 7.3 7. 7.58 7.8 8.7 8. 8.66 8.8 Poids/Peso (lb) (12.9) (13.3) (13.5) (13.8) (14.) (14.3) (14.9) (15.5) (16.2) (16.7) (17.2) (17.8) (18.4) (19.1) (19.4) Length"L" mm 132.4 136 138 141 144 147 154 16 166 173 179 185 192 2 25 "L" (in) (5.22) (5.36) (5.42) (5.54) (5.67) (5.79) (6.4) (6.29) (6.54) 6.79 7.4 7.29 7.54 7.88 8.4 Code: FM 4-olt, 5/16-18 UNC Manifold - - ø 95.5 (3.76) 45.7 (1.8) "L" 48.3 (1.9) 4 x 5/16-18 UNC 12.7 (.5) 28.56 (1.) 2.55 (.1) ø 44.4 / 44.45 (1.748 / 1.75) 2 x 31.75 (1.25) 2 x 14.28 (.562) 63.5 (2.) 48.26 (1.9) ø 82.55 (3.25) 45 3/8-16 UNC 2 x 56.9 (2.24) 48.27 (1.94) Motor with manifold mount is supplied with 2 O-rings. Zum Motor mit Universalanschluß werden 2 O-Ringe geliefert. Deux joints toriques sont livrés avec les moteurs a plan de raccordement universel. Il blocchetto connessioni è corredato da 2 OR. Code FM disp. 36 45 5 65 8 1 13 165 195 23 26 295 33 365 39 Weight/Gewicht kg 5.58 5.62 5.67 5.8 5.94 6.8 6.31 6.62 7.3 7.17 7.39 7.62 7.94 8.26 8.39 Poids/Peso (lb) (12.3) (12.4) (12.5) (12.8) (13.1) (13.4) (13.9) (14.6) (15.5) (15.8) (16.3) (16.8) (17.5) (18.2) (18.5) Length"L" mm 132.4 136 138 141 144 147 154 16 166 173 179 185 192 2 25 "L" (in) (5.22) (5.36) (5.42) (5.54) (5.67) (5.79) (6.4) (6.29) (6.54) (6.79) (7.4) (7.29) (7.54) (7.88) (8.4) English equivalents for metric specifications are shown in ( ). pp 2- T SD.p65 3 Parker Hannifin Corporation

Mounting,Ports/Gehäuse,nschlüße Carter,Orifices / Montaje,Lumbreras T Series / Serie / Série HY13-159-4/,EU Code: FP 4 olt, 1/2-14 NPTF ø 95.5 (3.76) "L" 48.3 (1.9) 1/2-14 NPTF 2.55 (.1) 45.72 (1.8) ø 44.4 / 44.45 (1.748 / 1.75) 2 x 22.86 (.9) 48.26 (1.9) ø 82.55 (3.25) 45 3/8-16 UNC 2 x 56.9 (2.24) 48.27 (1.94) Code FP disp. 36 45 5 65 8 1 13 165 195 23 26 295 33 365 39 Weight/Gewicht kg 5.58 5.62 5.67 5.8 5.94 6.8 6.31 6.62 7.3 7.17 7.39 7.62 7.94 8.26 8.39 Poids/Peso (lb) (12.3) (12.4) (12.5) (12.8) (13.1) (13.4) (13.9) (14.6) (15.5) (15.8) (16.3) (16.8) (17.5) (18.2) (18.5) Length"L" mm 132.4 136 138 141 144 147 154 16 166 173 179 185 192 2 25 "L" (in) (5.22) (5.36) (5.42) (5.54) (5.67) (5.79) (6.4) (6.29) (6.54) (6.79) (7.4) (7.29) (7.54) (7.88) (8.4) Code: FS 4 olt, 7/8"-14 SE O-Ring ø 95.5 (3.76) "L" 48.3 (1.9) 7/8-14 SE O-Ring 2.55 (.1) 45.72 (1.8) ø 44.4 / 44.45 (1.748 / 1.75) 2 x 22.86 (.9) 48.26 (1.9) ø 82.55 (3.25) 45 3/8-16 UNC 2 x 56.9 (2.24) 48.27 (1.94) Code FS disp. 36 45 5 65 8 1 13 165 195 23 26 295 33 365 39 Weight/Gewicht kg 5.58 5.62 5.67 5.8 5.94 6.8 6.31 6.62 7.3 7.17 7.39 7.62 7.94 8.26 8.39 Poids/Peso (lb) (12.3) (12.4) (12.5) (12.8) (13.1) (13.4) (13.9) (14.6) (15.5) (15.8) (16.3) (16.8) (17.5) (18.2) (18.5) Length"L" mm 132.4 136 138 141 144 147 154 16 166 173 179 185 192 2 25 "L" (in) (5.22) (5.36) (5.42) (5.54) (5.67) (5.79) (6.4) (6.29) (6.54) (6.79) (7.4) (7.29) (7.54) (7.88) (8.4) English equivalents for metric specifications are shown in ( ). pp 2- T SD.p65 31 Parker Hannifin Corporation

Shafts / btriebswellen rbre / Ejes T Series / Serie / Série HY13-159-4/,EU Code Code F Code: 9 1" Straight with.38" Crosshole 44.7 (1.76) Code: 1 1" Keyed Code: 21 Corrosion Resistant 44.7 (1.76) Code: 11 1" 6 Spline 44.7 (1.76) Code: 13 Long 1" Keyed 49.3 (1.94) English equivalents for metric specifications are shown in ( ). pp 2- T SD.p65 32 Parker Hannifin Corporation

Shafts / btriebswellen rbre / Ejes T Series / Serie / Série HY13-159-4/,EU Code: 9 ø 9.53 / 9.91 (.375 /.39) 1" Straight with.38" Crosshole 14.52 (.571) 13.51 (.531) 38.6 (1.52) ø 25.37 / 25.4 (.999 / 1.) Code: 1 19. (.748) 1" Keyed Code: 21 Corrosion Resistant 1/4 x 1 SE J52 28.3 (1.114) 27.64 (1.88 ) 1/4-2 UNC (15.8).62 38.6 (1.52) ø 27.97 (1.11) 6.37 (.251) 6. (.25) ø 25.37 / 25.4 (.999 / 1.) 6 SE J499 Code: 11 1" 6 Spline 25.4 (1.) MIN 38.6 (1.52) ø 25.32 (.997) 25.2 (.985) 1/4-2 UNC 15.8 (.62) 1.32 (.52) 1.17 (.46) 4.88 (.192) 6 o 6.27 (.246) 6.2 (.244) ø 21.54 (.848) 21.29 (.838) Code: 13 Long 1" Keyed 1.24 (.49) 19. (.748) 1/4 x 1 SE J52 ø 28.3 (1.14) 27.64 (1.88) 6.37 (.251) 6. (.25) 43.2 (1.7) 1.32 (.52) 1.17 (.46) ø 25.37 / 25.4 (.999 / 1.) English equivalents for metric specifications are shown in ( ). pp 2- T SD.p65 33 Parker Hannifin Corporation

Shafts / btriebswellen rbre / Ejes T Series / Serie / Série HY13-159-4/,EU Code Code F Code: 26 25mm Keyed with 8mm Key 5.4 (1.98) Code: 28 7/8" 13 Tooth Spline 41.4 (1.63) English equivalents for metric specifications are shown in ( ). pp 2- T SD.p65 34 Parker Hannifin Corporation

Shafts / btriebswellen rbre / Ejes T Series / Serie / Série HY13-159-4/,EU Code: 26 25mm Keyed with 8mm Key Key 8 x 7 x 23 mm 42.6 (1.677) ø25.15 (.98) 25.2 (.98) M8 x 1.25 19 (.75) 8. (.315) 7.96 (.313) Code: 28 7/8" 13 Tooth Spline 18.2 (.715) 17.9 (.75) 17.8 (.7) MIN ø 22.15 (.872) 21.9 (.862) SE J498 16/32 Spline English equivalents for metric specifications are shown in ( ). pp 2- T SD.p65 Parker Hannifin Corporation