eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com
Content uni Flex L-S 47% Open Radius 1.6 page 3-6 uni Flex L-S 47% Open Radius 2,2 page 7-10 uni Flex L-S 47% Open Radius 2.5,3.0,3.5,4.0 page 11-14
Datasheet: uni Flex L-S 47% Open Radius 1.6 Plastic Modular elt Series uni Flex L-S 47% Open (Radius 1.6) elt material & color P and lock material & color elt width POM-D POM-D/P6.6 Spiral runng direction Runng direction W PP P6.6 Non standard material and color: See uni Material and Color Overview. lternative p and lock systems and materials: Contact Customer Service. Permissible tensile force (elt/p material) PP/P6.6 Straight sections Curve sections Straight sections Curve sections elt weight (elt/p material) POM-D/P6.6 PP/P6.6 N lbf N lbf N lbf N lbf kg/m lb/ft kg/m lb/ft P (Nomal) *M. No. drive sprocket per shaft Number of wear strips (M. No.) **Carry (pcs) 250 9.8 10000 2248 2440 549 5000 1124 1440 324 2.5 1.65 1.5 1.01 2 2 2 326 12.8 13040 2931 2440 549 6520 1466 1440 324 3.2 2.15 2.0 1.31 3 3 2 403 15.9 16120 3624 3110 699 8060 1812 1960 441 3.9 2.65 2.4 1.63 3 3 2 479 18.9 19160 4307 3110 699 9580 2154 1960 441 4.7 3.15 2.9 1.93 5 4 2 555 21.9 22200 4991 3110 699 11100 2495 1960 441 5.4 3.66 3.3 2.24 5 4 2 631 24.8 25240 5674 3110 699 12620 2837 1960 441 6.2 4.16 3.8 2.54 5 5 3 708 27.9 28320 6366 3110 699 14160 3183 1960 441 6.9 4.66 4.2 2.85 5 5 3 784 30.9 31360 7050 3110 699 15680 3525 1960 441 7.7 5.16 4.7 3.16 7 6 3 860 33.9 34400 7733 3110 699 17200 3867 1960 441 8.4 5.66 5.2 3.47 7 6 3 936 36.9 37440 8417 3110 699 18720 4208 1960 441 9.2 6.16 5.6 3.77 7 7 4 W P T Sideflexg belt Nomal pitch: 50.8 (2.00 ) Surface type: Flat Surface openg: 47% ackflex radius: 100.0 (3.94 ) P : 6 (0.24 ) M. side radius: 1.6 x belt width 50.8 2.00 T 15.0 0.59 **Return (pcs) PITC 50.8 MM/2.00 IN SIDE FLEXING STNDRD 1013 39.9 40520 9109 3110 699 20260 4554 1960 441 9.9 6.67 6.1 4.08 7 7 4 1089 42.9 43560 9792 3110 699 21780 4896 1960 441 10.7 7.17 6.5 4.39 9 8 4 dditional non-standard belt widths are available steps of 25.4 (1.00 ). General belt tolerance is +0/-0.4% at 23 C/73 F. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: POM-D 2500 N (562 lbf), PP 1200 N (270 lbf). **Max. Spacg between wear strips, Carry: 152 (6 ); Return: 304 (12 ). = Sgle Lk 3
Datasheet: uni Flex L-S 47% Open Radius 1.6 ccessories Rubber Top X elt material & color Rubber material, hardness & color X Curved PP TPE-S Shore 60 K 3.0 0.12 uni Flex L-S Rubber Top R1.6: Indent m. 97.0 (3.82 ) and Increment 25.4 (1.00 ). ccessories Side Guard Closed Side Guard Open Photo will be updated Photo will be updated Side Guard Outside Closed Side Guard Closed Material & color POM-D Side Guard Open 50.0 1.97 Side Guard Outside Closed 25.4 1.00 M. dent for Side Guard Closed and Side Guard Open: 55.0 (2.17 ) and Increment 25.4 (1.00 ). M/max dent for Side Guard Outside Closed: 10.0 (0.39 ). Non Standard material and color: See uni Material and Color Overview. 10.0 25.4 50.0 0.39 1.00 1.97 4
Datasheet: uni Flex L-S 47% Open Radius 1.6 ccessories mflight Runng direction V 2 1 Material & color 1 2 V Push PE W > 1 25.4 1.00 26.0 1.02 125 Other Non Standard option: See uni mflight Overview. elt width m 83.0 3.27 Runng direction 33.0 1.30 PI m 68.5 2.70 Increment: 25.4 (1.00 ). PI Design Guideles F E uni Flex L-S R2.2 uni Flex L-S R1.6 (side) W m. 1.5 x W m. 1.5 x W C m. 3.2 x W m. 2.6 x W C m. 2.2 x W m. 1.6 x W D G D m. 2.0 x W m. 2.0 x W C E m. 2.0 x W m. 2.0 x W F m. 8.9 x W m. 7.7 x W G m. 8.4 x W m. 7.2 x W uni Flex L-S 47% Open Radius 1.6 can not be used conveyors with both left and right turng curves. ll curves have to turn the same direction. For m. conveyor dimensions please refer to sketch and diagram. 5
Datasheet: uni Flex L-S 47% Open Radius 1.6 Sprocket No. of teeth Pilot ore 1.00 25.4 ore size 1.18 30.0 1.25 31.8 1.50 38.1 1.57 40.0 2.50 63.5 Overall Pitch ub Dimension Dimension Z08 134.6 5.30 131.5 5.18 107.6 4.23 54.4 2.14 74.9 2.95 Z10 168.3 6.63 164.0 6.46 141.3 5.56 71.4 2.81 90.8 3.57 Z12 203.5 8.01 196.5 7.74 176.5 6.94 88.2 3.47 106.8 4.20 Z15 253.4 9.98 245.4 9.66 226.4 8.91 113.2 4.46 131.0 5.16 Sgle row/two way Mached P6 N Mached sprocket Mached sprocket Non standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request Two-part sprocket are available upon request Other bore sizes are available upon request uni Retaer Rgs: See uni Retaer Rg data sheet Width of tooth = 15.0 (0.59 ) Width of sprocket = 30.0 (1.18 ) Max. load per sprocket shown does not take bore size to account. Please also ensure that sufficient size shaft is chosen for correspondg load. For correct sprocket position: See uni ssembly Instructions for uni Flex L-S. For more detailed sprocket formation, contact Customer Service. uni Flex L-S 47% Open Radius 1.6/170717 Conveyor elts Seamless elts Modular elts Timg elts Expert advice, quality solutions and local service for all your beltg needs www.aeraalbeltech.com This formation is subject to alteration due to contuous development. eraal eltech will not be held liable for the correct use of the above stated formation. This formation replaces previous formation. ll activities performed and services rendered by eraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operatg companies. Transmission elts Fabrication & service eraal eltech Modular /S julmagervej 21 DK-7100 Vejle T +45 7572 3100 F +45 7572 3348 adm@unichas.com www.unichas.com 6
Datasheet: uni Flex L-S 47% Open Radius 2.2 Plastic Modular elt Series uni Flex L-S 47% Open (Radius 2.2) elt material & color P and lock material & color elt width POM-D POM-D/P6.6 Spiral runng direction Runng direction W PP P6.6 Non standard material and color: See uni Material and Color Overview. lternative p and lock systems and materials: Contact Customer Service. Permissible tensile force (elt/p material) PP/P6.6 Straight sections Curve sections Straight sections Curve sections elt weight (elt/p material) POM-D/P6.6 PP/P6.6 N lbf N lbf N lbf N lbf kg/m lb/ft kg/m lb/ft P (Nomal) *M. No. drive sprocket per shaft Number of wear strips (M. No.) **Carry (pcs) 250 9.8 10000 2248 2440 549 5000 1124 1440 324 2.5 1.65 1.5 1.01 2 2 2 326 12.8 13040 2931 2440 549 6520 1466 1440 324 3.2 2.15 2.0 1.31 3 3 2 403 15.9 16120 3624 3110 699 8060 1812 1960 441 3.9 2.65 2.4 1.63 3 3 2 479 18.9 19160 4307 3110 699 9580 2154 1960 441 4.7 3.15 2.9 1.93 5 4 2 555 21.9 22200 4991 3110 699 11100 2495 1960 441 5.4 3.66 3.3 2.24 5 4 2 631 24.8 25240 5674 3110 699 12620 2837 1960 441 6.2 4.16 3.8 2.54 5 5 3 708 27.9 28320 6366 3110 699 14160 3183 1960 441 6.9 4.66 4.2 2.85 5 5 3 784 30.9 31360 7050 3110 699 15680 3525 1960 441 7.7 5.16 4.7 3.16 7 6 3 860 33.9 34400 7733 3110 699 17200 3867 1960 441 8.4 5.66 5.2 3.47 7 6 3 936 36.9 37440 8417 3110 699 18720 4208 1960 441 9.2 6.16 5.6 3.77 7 7 4 W P T Sideflexg belt Nomal pitch: 50.8 (2.00 ) Surface type: Flat Surface openg: 47% ackflex radius: 100.0 (3.94 ) P : 6 (0.24 ) M. side radius: 2.2 x belt width 50.8 2.00 T 15.0 0.59 **Return (pcs) PITC 50.8 MM/2.00 IN SIDE FLEXING STNDRD 1013 39.9 40520 9109 3110 699 20260 4554 1960 441 9.9 6.67 6.1 4.08 7 7 4 1089 42.9 43560 9792 3110 699 21780 4896 1960 441 10.7 7.17 6.5 4.39 9 8 4 dditional standard belt widths are available steps of 76.2 (3.00 ). dditional non-standard belt widths are available steps of 25.4 (1.00 ). 1699 66.9 67960 15277 3110 699 33980 7639 1960 441 16.7 11.19 10.2 6.85 13 12 6 dditional standard belt widths are available steps of 76.2 (3.00 ). dditional non-standard belt widths are available steps of 25.4 (1.00 ). 1927 75.9 77080 17328 3110 699 38540 8664 1960 441 18.9 12.69 11.6 7.77 13 13 7 General belt tolerance is +0/-0.4% at 23 C/73 F. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: POM-D 2500 N (562 lbf), PP 1200 N (270 lbf). **Max. Spacg between wear strips, Carry: 152 (6 ); Return: 304 (12 ). = Sgle Lk 7
Datasheet: uni Flex L-S 47% Open Radius 2.2 ccessories Rubber Top X elt material & color Rubber material, hardness & color X Curved PP TPE-S Shore 60 K 3.0 0.12 uni Flex L-S Rubber Top Radius 2.2: Indent m. 71.0 (2.80 ) and Increment 25.4 (1.00). ccessories Side Guard Closed Side Guard Open Photo will be updated Photo will be updated Side Guard Outside Closed Side Guard Closed Material & color POM-D Side Guard Open 50.0 1.97 Side Guard Outside Closed 25.4 1.00 M. dent for Side Guard Closed and Side Guard Open: 55.0 (2.17 ) and Increment 25.4 (1.00 ). M/max dent for Side Guard Outside Closed: 10.0 (0.39 ). Non Standard material and color: See uni Material and Color Overview. 10.0 25.4 50.0 0.39 1.00 1.97 8
Datasheet: uni Flex L-S 47% Open Radius 2.2 ccessories ottom Tab W Spiral runng direction Runng direction Y S Z V ottom Tab material and colors S V W Y Z old Down Edge POM-D W 11.0 0.43 306.5 12.07 325.9 12.83 9.0 0.35 14.0 0.55 PP W Non Standard material and color: See uni Material and Color Overview. ccessories mflight Runng direction V 2 1 Material & color 1 2 V Push PE W > 1 25.4 1.00 26.0 1.02 125 Other Non Standard option: See uni mflight Overview. elt width m 83.0 3.27 Runng direction 33.0 1.30 PI m 68.5 2.70 Increment: 25.4 (1.00 ). PI 9
Datasheet: uni Flex L-S 47% Open Radius 2.2 Design Guideles F C E W C uni Flex L-S R2.2 m. 1.5 x W m. 3.2 x W m. 2.2 x W D G D m. 2.0 x W C E m. 2.0 x W F m. 8.9 x W G m. 8.4 x W For m. conveyor dimensions please refer to sketch and diagram. Sprocket No. of teeth Pilot ore 1.00 25.4 ore size 1.18 30.0 1.25 31.8 1.50 38.1 1.57 40.0 2.50 63.5 Overall Pitch ub Dimension Dimension Z08 134.6 5.30 131.5 5.18 107.6 4.23 54.4 2.14 74.9 2.95 Z10 168.3 6.63 164.0 6.46 141.3 5.56 71.4 2.81 90.8 3.57 Z12 203.5 8.01 196.5 7.74 176.5 6.94 88.2 3.47 106.8 4.20 Z15 253.4 9.98 245.4 9.66 226.4 8.91 113.2 4.46 131.0 5.16 Sgle row/two way Mached P6 N Mached sprocket Mached sprocket Non standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request Two-part sprocket are available upon request Other bore sizes are available upon request uni Retaer Rgs: See uni Retaer Rg data sheet Width of tooth = 15.0 (0.59 ) Width of sprocket = 30.0 (1.18 ) Max. load per sprocket shown does not take bore size to account. Please also ensure that sufficient size shaft is chosen for correspondg load. For correct sprocket position: See uni ssembly Instructions for uni Flex L-S. For more detailed sprocket formation, contact Customer Service. uni Flex L-S 47% Open Radius 2.2/170717 Conveyor elts Seamless elts Modular elts Timg elts Expert advice, quality solutions and local service for all your beltg needs www.aeraalbeltech.com This formation is subject to alteration due to contuous development. eraal eltech will not be held liable for the correct use of the above stated formation. This formation replaces previous formation. ll activities performed and services rendered by eraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operatg companies. Transmission elts Fabrication & service eraal eltech Modular /S julmagervej 21 DK-7100 Vejle T +45 7572 3100 F +45 7572 3348 adm@unichas.com www.unichas.com 10
Datasheet: uni Flex L-S 47% Open Radius 2.5/3.0/3.5/4.0 Plastic Modular elt Series uni Flex L-S 43% Open (Radius 2.5/3.0/3.5/4.0) Non standard material and color: See uni Material and Color Overview. lternative p and lock systems and materials: Contact Customer Service. elt width POM-D/P6.6 Spiral runng direction Recoended elt material & color POM-D Recoended P material & color P6.6 Permissible tensile force (elt/p material) PP/P6.6 Straight sections Curve sections Straight sections Curve sections P T P (Nomal) Sideflexg belt Nomal pitch: 50.8 (2.00 ) Surface type: Flat Surface openg: 47%/50% ackflex radius: 65.0 (2.56 ) P : 6 (0.24 ) M. side radius: 2.5 / 3.0 / 3.5 / 4.0 x belt width 50.8 2.00 T 15.0 0.59 elt weight (elt/p material) POM-D/P6.6 PP/P6.6 N lbf N lbf N lbf N lbf kg/m lb/ft kg/m lb/ft *M. No. drive sprocket per shaft Number of wear strips (M. No.) **Carry (pcs) 250 9.8 10000 2248 2440 549 5000 1124 1440 324 2.5 1.65 1.5 1.01 2 2 2 326 12.8 13040 2931 2440 549 6520 1466 1440 324 3.2 2.15 2.0 1.31 3 3 2 403 15.9 16120 3624 3110 699 8060 1812 1960 441 3.9 2.65 2.4 1.63 3 3 2 479 18.9 19160 4307 3110 699 9580 2154 1960 441 4.7 3.15 2.9 1.93 5 4 2 555 21.9 22200 4991 3110 699 11100 2495 1960 441 5.4 3.66 3.3 2.24 5 4 2 631 24.8 25240 5674 3110 699 12620 2837 1960 441 6.2 4.16 3.8 2.54 5 5 3 708 27.9 28320 6366 3110 699 14160 3183 1960 441 6.9 4.66 4.2 2.85 5 5 3 784 30.9 31360 7050 3110 699 15680 3525 1960 441 7.7 5.16 4.7 3.16 7 6 3 860 33.9 34400 7733 3110 699 17200 3867 1960 441 8.4 5.66 5.2 3.47 7 6 3 936 36.9 37440 8417 3110 699 18720 4208 1960 441 9.2 6.16 5.6 3.77 7 7 4 **Return (pcs) PITC 25.4 MM/1.00 IN SIDE FLEXING NON STNDRD 1013 39.9 40520 9109 3110 699 20260 4554 1960 441 9.9 6.67 6.1 4.08 7 7 4 1089 42.9 43560 9792 3110 699 21780 4896 1960 441 10.7 7.17 6.5 4.39 9 8 4 dditional standard belt widths are available steps of 76.2 (3.00 ) dditional non-standard belt widths are available steps of 25.4 (1.00 ) 1699 66.9 67960 15277 3110 699 33980 7639 1960 441 16.7 11.19 10.2 6.85 13 12 6 dditional standard belt widths are available steps of 76.2 (3.00 ) dditional non-standard belt widths are available steps of 25.4 (1.00 ) 1927 75.9 77080 17328 3110 699 38540 8664 1960 441 18.9 12.69 11.6 7.77 13 13 7 General belt tolerance is +0/-0.4% at 23 C/73 F. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: POM-D 2500 N (562 lbf), PP 1200 N (270 lbf). **Max. Spacg between wear strips, Carry: 152 (6 ); Return: 304 (12 ). = Sgle Lk 11
Datasheet: uni Flex L-S 47% Open Radius 2.5/3.0/3.5/4.0 ccessories Rubber Top X elt material & color Rubber material, hardness & color X Curved PP TPE-S Shore 60 K 3.0 0.12 uni Flex L-S Rubber Top: Indent m. 71.0 (2.80 ) and Increment 25.4 (1.00). ccessories Side Guard Closed Side Guard Open Photo will be updated Photo will be updated Side Guard Outside Closed Side Guard Closed Material & color POM-D Side Guard Open 50.0 1.97 Side Guard Outside Closed 25.4 1.00 M. dent for Side Guard Closed and Side Guard Open: 80.0 (3.15 ) and Increment 25.4 (1.00 ). M/max dent for Side Guard Outside Closed: 10.0 (0.39 ). Non Standard material and color: See uni Material and Color Overview. 10.0 25.4 50.0 0.39 1.00 1.97 12
Datasheet: uni Flex L-S 47% Open Radius 2.5/3.0/3.5/4.0 Sprocket No. of teeth Pilot ore 1.00 25.4 ore size 1.18 30.0 1.25 31.8 1.50 38.1 1.57 40.0 2.50 63.5 Overall Pitch ub Dimension Dimension Z08 134.6 5.30 131.5 5.18 107.6 4.23 54.4 2.14 74.9 2.95 Z10 168.3 6.63 164.0 6.46 141.3 5.56 71.4 2.81 90.8 3.57 Z12 203.5 8.01 196.5 7.74 176.5 6.94 88.2 3.47 106.8 4.20 Z15 253.4 9.98 245.4 9.66 226.4 8.91 113.2 4.46 131.0 5.16 Sgle row/two way Mached P6 N Mached sprocket Mached sprocket Non standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request Two-part sprocket are available upon request Other bore sizes are available upon request uni Retaer Rgs: See uni Retaer Rg data sheet Width of tooth = 7.0 (0.28 ) Width of sprocket = 30.0 (1.18 ) Max. load per sprocket shown does not take bore size to account. Please also ensure that sufficient size shaft is chosen for correspondg load. For correct sprocket position: See uni ssembly Instructions for uni Flex S. For more detailed sprocket formation, contact Customer Service. 13
Datasheet: uni Flex L-S 47% Open Radius 2.5/3.0/3.5/4.0 Conveyor elts Seamless elts Modular elts Timg elts Expert advice, quality solutions and local service for all your beltg needs www.aeraalbeltech.com This formation is subject to alteration due to contuous development. eraal eltech will not be held liable for the correct use of the above stated formation. This formation replaces previous formation. ll activities performed and services rendered by eraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operatg companies. Transmission elts Fabrication & service uni Flex L-S 47% Open Radius 2.5/3.0/3.5/4.0/160106 eraal eltech Modular /S julmagervej 21 DK-7100 Vejle T +45 7572 3100 F +45 7572 3348 adm@unichas.com www.unichas.com 14
Date: 07.2016 Conveyor elts Seamless elts Modular elts Timg elts Expert advice, quality solutions and local service for all your beltg needs www.aeraalbeltech.com This formation is subject to alteration due to contuous development. eraal eltech will not be held liable for the correct use of the above stated formation. This formation replaces previous formation. ll activities performed and services rendered by eraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operatg companies. Transmission elts Fabrication & service Global eadquarters: eraal eltech oldg.v. P.O. ox 38, 1700 eerhugowaard The Netherlands T +31 72 575 1212 F +31 72 571 6455 fo@aeraalbeltech.com