Solar pumping project Parameter Location: Somalia, Garowe (8 North; 48 East) Water temperature: 2 C Required daily output: 8 m³; Sizing for average month Dirt loss: 5. % Motor cable: 19 m Pipe type: Total dynamic head: 17 m Pipe length: Products PS25k2 CSJ322 D LC25P6 Motor cable Accessories Quantity Details 1 pc. Submersible pump system including controller with DataModule, motor and pump end 88 pc. 22, Wp; 22 x 4 modules; 15 tilted 19 m 25 mm² 3phase cable 1 set Well Probe, Float Switch, Surge Protector, PV Disconnect 145, PV Protect 1125 SunSwitch setting in PumpScanner Daily output in average month Daily values Jan Feb Mar Apr May Jun Jul Aug Sep Oct min. 45 W/m² 86 m³ Nov Dec Av. Output [m³] Hourly values 6: 7: 8: 9: 1: 11: 12: 13: 14: 15: 16: 17: 18: Output [m³/h] 1/5
IRW Solar pumping project System characteristic Min. 8 W/m², 2 C Max./STC* PV generator Cell temperature [ C] 46 25 Temperature loss 8.8 Dirt loss 5. Pmax [Wp] 15,2 22, Vmp 61 669 Imp 25 33 Voc 753 827 Isc 27 35 Pout [W] 15,2 Vout 61 Iout 25 Motor cable Power loss 1.5 2.3 2.7 Pump systems Motor power [W] 8,18 14,8 21,3 Motor voltage [V AC] 31 336 369 Motor current 18 3 39 Motor speed [rpm] 2,355 2,545 2,795 Frequency [Hz] 42 45 48 Flow rate [m³/h].4 17 27 Efficiency 2.2 52 57 *STC: Standard test conditions for photovoltaic modules, 1 W/m² solar iradiance, 25 C cell temperature 2/5
IRW Solar pumping project Wiring diagram 3/5
IRW Solar pumping project System Layout 1: PSk2 Controller 2: Submersible Pump 3: Stilling Tube 4: Well Probe 5: Cable Splice Kit 6: Grounding Rod 7: Surge Protector* 8: Safety Rope 9: Water Meter 11: Float Switch 12: PV Protect 13: PV Combiner 14: PV Disconnect 15: PV Module for Sun Switch 16: PV Generator *It is recommended to install a Surge Protector at each controller sensor input. 1: Pressure Sensor 4/5
IRW Solar pumping project Sizing Layout H (Static head): B (Drawdown): Vertical height from the dynamic water level to the highest point of delivery. Lowering of water level depending on flow rate and recovery rate of the well. D (Pipeline inner diameter) L (Pipe length): M (Motor cable): T (Tilt angle): Entire pipeline from the pump outlet to the point of delivery. Ellbows and armatures must be added as an equivalent length of pipeline. The cable between controller and pump unit. Angle of the PV generator surface from the horizontal plane. 5/5
PS25k2 CSJ322 Solar Submersible Pump System for 6" wells System Overview Head Flow rate max. 2 m max. 38 m³/h PS DataModule Integrated Data Logger and advanced pump management features. Allows for simple system configuration, realtime and stored data plus provides Bluetooth communication to PumpScanner AndroidApp and PS Communicator.* Technical Data Controller PS25k2 Control inputs for dry running protection, remote control etc. Protected against overload and overtemperature Integrated MPPT (Maximum Power Point Tracking) Power Input voltage Optimum Vmp** Motor current Efficiency Ambient temp. Enclosure class max. 25 kw max. 85 V > 575 V max. 4 A max. 98 % 3...5 C IP54 Motor AC DRIVE SUB 6" 18.5kW Highly efficient 3phase AC motor Frequency: 25...5 Hz Premium materials, stainless steel: AISI 34 No electronics in the motor Motor speed Power factor Insulation class Enclosure class Submersion 1,4...2,85 rpm.87 F IP68 max. 3 m Pump End PE CSJ322 Nonreturn valve Premium materials, stainless steel: AISI 34 Optional: dry running protection Centrifugal pump Pump Unit PU25k2 CSJ322 (Motor, Pump End) Borehole diameter Water temperature min. 6, in max. 3 C Standards 26/42/EC, 24/18/EC, 26/95/EC IEC/EN 6172:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. * PS DataModule is included in all PSk2 controllers and any PS controllers with D in their description. DataModule features in the future as this is not a retrofit option. D variants should be ordered if there is a potential need to use the PS **Vmp: MPPvoltage under Standard Test Conditions (STC): 1 W/m² solar irradiance, 25 C cell temperature
PS25k2 CSJ322 Solar Submersible Pump System for 6" wells Pump Chart Vmp* > 575 V Dimensions and Weights Controller H= H1 = H2 = W1 = W2 = D= D1 = D2 = 5 mm 45 mm 425 mm 32 mm 29 mm 9. mm 22 mm 25 mm Pump Unit A= B= C= D= E= S= 3,412 mm 1,18 mm 2,394 mm 143 mm 133 mm 3 in Net weight Controller Pump Unit Motor Pump End 17 kg 118 kg 73 kg 45 kg *Vmp: MPPvoltage under Standard Test Conditions (STC): 1 W/m² solar irradiance, 25 C cell temperature
LC25P6 Highefficiency PV Module Features ƒ high energy yields ensured by high conversion efficiency ƒ sturdy, clearanodized aluminum frame with predrilled holes for quick installation ƒ advanced EVA encapsulation with triplelayer backsheet, meets the most stringent safety requirements for highvoltage operation ƒ prewired junction box equipped with connectors plug n play ƒ reliable bypass diodes to prevent overheating (hot spot effect) and to minimise power loss by shading ƒ manufactured in ISO 91:2certified factory photo may differ from actual product Warranty Specifications ƒ Warranty: 2 years ƒ Performance guarantee: up to 1 years (9% power output) up to 2 years (8% power output) Electrical Data Peak power Tolerance Pmax [Wp] 25 + 5/ Details according to warranty issued by LORENTZ Max. power current Max. power voltage Imp Vmp 8.23 3.4 Short circuit current Isc 8.81 Open circuit voltage Voc 37.6 Standards Temperature coefficient for Pmax Temperature coefficient for Voc [%/ C] [%/ C].42.34 LC25P6 is certified according to IEC 61215 and 6173 by TÜV Rheinland and meets the requirements for CE. Temperature coefficient for Isc Max. system voltage [%/ C] [VDC].6 1, Quali ed, IEC 61215 Safety tested, IEC 6173 Periodic Inspection All technical data at standard test condition: AM = 1.5, E = 1, W/m², cell temperature: 25 C Cells Number of cells in series 6 Number of cells in parallel 1 Cell technology polycrystalline Cell shape rectangular 1463
Electrical Performance Electrical Performance Electrical Performance Temperature Dependence Irradiation Dependence for different temperatures, at AM=1.5, E=1, W/m2 for different irradiation, at 25 C of Isc, Voc and Pmax of Isc, Voc and Pmax at 25 C 9 8 7 Current 6 5 4 3 2 1 75 C 5 C 25 C 9 28 1, W/m 7 8 W/m2 Current 6 5 6 W/m2 4 3 4 W/m 2 2 1 2 W/m 2 14 Normalised 12 Isc, Voc and Pmax (%) 1 8 6 4 2 Isc Voc Pmax 14 Normalised 12 Isc, Voc and Pmax (%) 1 8 6 4 2 Isc Voc Pmax 1 23 Voltage 4 1 23 Voltage 4 25 +25+5+75 Cell temperature [ C] 1 2 4 6 8 1 1,2 Irradiance [W/m2] Physical Specifications mm A A A A 9 14 A A 9 14 1,65 [65.] Ø4 1,37 [53,9] 87 [34.3] A A 992 [39.1] 4 [1.6] 942 [37.1] 1 [.4] Weight [kg] 18.5 4 [1.6] A A Dimension Strength [mm] [N/m2] 1,65 992 4 2,4 Cable approx. 9 mm, 4 mm2 Connectors MC4 PVKBT4/6IIUR / PVKST4/6IIUR 35 [1.4] 1463