FINAL EXAM. 1. Fill in the gaps with the appropriate word from the list. (30 p.) A. two points operates injecting stroke

Similar documents
UNIT IV INTERNAL COMBUSTION ENGINES

Chapter 14 Small Gas Engines

ENGINES ENGINE OPERATION

UNIT 2 POWER PLANTS 2.1 INTRODUCTION 2.2 CLASSIFICATION OF IC ENGINES. Objectives. Structure. 2.1 Introduction


Introduction to I.C Engines CH. 1. Prepared by: Dr. Assim Adaraje

MERCHANT MARINE ACADEMY OF MACEDONIA SCHOOL OF ENGINEERS

SNS COLLEGE OF TECHNOLOGY (An Autonomous Institution) Department of Automobile Engineering

Handout Activity: HA170

I.C ENGINES. CLASSIFICATION I.C Engines are classified according to:

ADDIS ABABA UNIVERSITY INSTITUTE OF TECHNOLOGY

SAMPLE STUDY MATERIAL

Internal Combustion Engines

Unit IV. Marine Diesel Engine Read this article about the engines used in the marine industry

National Maritime Center

OPERATIONS SEAFARER CERTIFICATION GUIDANCE NOTE SA MARITIME QUALIFICATIONS CODE. Deck: Ship s Power Plants

FUNDAMENTAL OF AUTOMOBILE SYSTEMS

ENGINE & WORKING PRINCIPLES

The 4 Stroke Diesel Cycle

TECHNICAL MANUAL ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS LIST AND SPECIAL TOOLS LIST) FOR

Approved by AICTE, Government of India & affiliated to Dr. A.P.J. Abdul Kalam Technical University, Lucknow Department of Mechanical Engineering

Engine, Generators Maintenance & Safety. UAE, Dubai, Cityseason Suites Hotel. Training Course : One Weeks Training Course In. As Under Details :

TKP3501 Farm Mechanization

National Maritime Center

CYLINDER HEADS AND VALVES

Air Cooled Engine Technology. Roth 9 th Ch 5 2 & 4 Cycle Engines Pages 81 94

Chapter 4 Ignition & Electrical Systems

Fundamentals of Small Gas Engines

VALVE TIMING DIAGRAM FOR SI ENGINE VALVE TIMING DIAGRAM FOR CI ENGINE

Diesel Engine Fundamentals Part 1 Course# ME4061

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) Summer 15 EXAMINATION Subject Code: Model Answer Page No: 1/18

THE WOLSELEY "VIPER" AERO ENGINE. (Hispano-Suiza W.4.A*)

1 Name any 5stationary parts and moving partsof a large 2-stroke diesel engine?

Introducing the Sea-Doo 4-TEC SUPERCHARGED

MECHANICAL(H4DOTC DIESEL) > Cylinder Block INSTALLATION 1. After setting the cylinder block to ST, install the crankshaft bearing.

Combustion engines. Combustion

CONVENTIONAL ENGINE CONSTRUCTION

Diesel Power Generating Plants. Introduction

Attention is drawn to the following places, which may be of interest for search:

The Four Stroke Cycle

2013 THERMAL ENGINEERING-I

Chapter 2 How the Diesel Aircraft Engine Functions

IC ENGINES. Differences between SI and CI engines: Petrol is fuel, which has a high self ignition temperature

IC ENGINE(4 STROKE) G.H.R.I.E&M JALGAON. Sec.(Mech) Sec.(Mech) Sec.(Mech) Sec.(Mech) Mehta chirag Shah sagar Patel jainish talele amit

WINTER -14 EXAMINATION Subject Code: Model Answer Page No: 1/22

Task 4: Read the texts, look at the illustrations and do the activities below.

CHAPTER 6 IGNITION SYSTEM

Internal combustion engines can be classified in a number of different ways: 1. Types of Ignition

Air-Cooled Engine Technology

Diesel Engine Operation I. PREPARATION FOR STARTING

COOPERATIVE PATENT CLASSIFICATION

Modern Auto Tech Study Guide Chapter 11 Pages Engine Fundamentals 62 Points

ENTEC WEST, INC. Marine Diesel Generators. Operating Instructions. Table of Contents SW 72nd Portland, Oregon (503)

Engines. ii. Explain the operation of spark ignition and compression ignition for internal combustion engines used aboard small vessels.

MODEL ANSWER WINTER 18 EXAMINATION 17408

Internal Combustion Engine. Prepared by- Md Ferdous Alam Lecturer, MEE, SUST

Comparative Study Of Four Stroke Diesel And Petrol Engine.

Study of cooling, lubrication and ignition system in diesel and petrol engines.

Diesel Engine Power Plants

DATA FOR AUTOMATIC AND REMOTE CONTROL OF MACHINERY SYSTEM

TM &P TECHNICAL MANUAL

Two Cycle and Four Cycle Engines

SOHC ENGINE MECHANICAL

UNIT 4 IGNITION SYSTEMS

MECHANICAL SCIENCE Module 1 Diesel Engine Fundamentals

AUTOMOTIVE ENGINEERING SECTION

Internal Combustion Engine

National Maritime Center

Part 5 Machinery Installations

GCE AS and A Level. Physics A. AS exams 2009 onwards A2 exams 2010 onwards. Unit 5C: Approved specimen question paper. Version 1.1

US ARMY BRADLEY FIGHTING VEHICLE SYSTEMS MECHANIC CORRESPONDENCE COURSE MOS/SKILL LEVEL: 63T30 PRINCIPLES OF INTERNAL COMBUSTION ENGINES

1.8L & 2.2L 4-CYL Article Text 1998 Subaru Impreza

Bronze Level Training

Practical Exercise for Instruction Pack 2. Ed Abdo

Engine Systems. Basic Engine Operation. Firing Order. Four Stroke Cycle. Overhead Valves - OHV. Engine Design. AUMT Engine Systems 4/4/11

SHEILDED METAL ARC WELDING (SMAW) AT/AE MECHANICAL CONTEST

H35/40G(V) /7 Call Center. Engine Power Plant Sales Dep t Tel : 86)

National Maritime Center

Technical Specification

LANLEO11 - SQA Unit Code F9GV 04 Service and repair engines on land-based equipment

INDEX. PAGE Adjustment mechanism for radial position of block on rotating

OBJECTIVE: GENERAL ASPECTS ABOUT ENGINES MECHANISM:

DOE FUNDAMENTALS HANDBOOK MECHANICAL SCIENCE Volume 1 of 2

Operate propulsion questions

INTRODUCTION OF FOUR STROKE ENGINE

National Maritime Center

H35/40G(V) HHI-EMD Korean-English 24/7 Call Center

Engine Project. These engines are typically used in lawn mowers, snow blowers, go-carts, etc

Heat engine. Heat engine

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) Winter 15 EXAMINATION Subject Code: Model Answer Page No: 1/26

Chapter 15. Inertia Forces in Reciprocating Parts

(a) then mean effective pressure and the indicated power for each end ; (b) the total indicated power : [16]

air cadet publication

1950 Pacemaker. Specifications & Adjustments

COLT 2310, 2510, AND 2712 COM PACT TRACTORS CHAPTER 9 TROUBLESHOOTING AND ANALYSIS

2. Discuss the effects of the following operating variables on detonation

Guidance to Instructors on Subject Delivery PISTON ENGINE PROPULSION. This is a suggested programme for the delivery of this subject.

ENGINE PERFORMANCE CURVE M3-135 hp ( rpm M2-120 hp ( rpm

Diesel Engine Fundamentals Part 2 Course# ME406

HAYNES ASSEMBLY MANUAL

Transcription:

Merchant Marine Academy of Macedonia School of Engineers English Language Academic Year: 2011-2012 September 2012 Semester: B (Retakes) Instructor s name: NAME: A.Γ.Μ.: DATE: FINAL EXAM 1. Fill in the gaps with the appropriate word from the list. (30 p.) A. two points operates injecting stroke internal piston revolution air sequence The diesel engine is a type of combustion engine which ignites the fuel by it into hot, high-pressure in a cylinder. It with a fixed of events, which may be done either in four strokes or, a stroke being the travel of the between its extreme. Each is accomplished in half a of the crankshaft. B. furnace place operation feedwater energy boiler chamber combustion mountings air A boiler is used to heat in order to produce steam. The released by the burning fuel in the boiler is stored as temperature and pressure in the steam produced. All boilers have a furnace or combustion where fuel is burnt to release its energy. is supplied to the boiler furnace to enable of the fuel to take. There must be a number of fittings or which ensure the safe of the boiler. Two basically different types of exist, namely the watertube and the firetube.

2 C. film crankshaft supplied pumps friction crosshead cooler sumptank connecting bearing The lubricating oil which is to the various moving parts of the engine, decreases and wear by forming an oil between the moving parts. The lube oil is stored in the below the engine. It is drawn from the tank through a strainer by pressure. Then it passes through fine filters and goes into a.first, the lube oil lubricates the main. Then passing along a passage in the, it lubricates the bottom end bearing and finally through a drilled passage in the rod, it lubricates the gudgeon pin or bearing. 2. Underline the correct choice. (15 p.) The unit of electrical resistance is the. Volt Ohm Ampere tonnage is the carrying capacity of a vessel in tons. displacement underdeck dead-weight The word gale means: fog light rain strong wind Steam is. invincible invisible invariable A material which offers low resistance to an electric current is a(n). breaker insulator conductor The lubricating grease is a mixture of petroleum oil and. soap paraffin water The is used to heat the wet steam before it enters the main steam pipe.

3 condenser economiser superheater We can store vegetable oil in a. sack barrel bale are used to reduce friction between two metals. cams blades bearings The piston reciprocates rotates oscillates inside the cylinder. 3. Match the words to their synonym or explanation. Write the pairs in the lines below. There is an extra word. (10 p.) crankshaft empty loop of wire set free collision the main component of a diesel engine which transmits power to the flywheel water jacket meter, indicator hollow coil gudgeon connects the piston rod to the connecting rod of a reciprocating engine pin bedplate when two ships crash gauge maintains the desired temperature of the cylinder release shows the presence of sea water in the fresh water system salinometer a structure which holds the crankcase and supports the cylinder block crosshead

4 4. Answer any five (5) of the following questions. (20 p.) 1. What is the use of check valves? 2. What does a steam turbine consist of? 3. What is gross register tonnage? 4. a) What is the principle of operation of a diesel engine? b) Write the names of the strokes of a 4-stroke diesel engine. 5. What are the parts of the forced lubricating system? 6. Name the main parts of a motor. 7. How many basic types of boilers are there? 8. What are the similarities between an electric motor and an electric generator?

5 5. Match the words in column A to appropriate ones in column B to form compound nouns. (10 p.) A cam scavenge ball cross cylinder flow air throttle crank push B bearing valve head tight shaft ports meter rod liner case 6. Put the verbs into either the Simple Present or the Present Continuous. (15 p.) The Second Mate (supervise) work on deck and he (study) the stowage plan at the moment. A quayside crane (lift) the cargo on board the ships. The men are in the holds; they (check) the ventilation system and the lights. A ship (moor) at a berth by the quay. On a cargo vessel you (usually/store) cargo in the holds or on the deck. The crane (load) the containers on board now. It is important to secure or lash the cargo so that it (not/shift) during a voyage. Look! The engineers (overhaul) the engines and the pipelines (fill) the fuel tanks with fuel. GOOD LUCK!!!