Dräger X-plore 7500 Full Face Mask

Similar documents
Dräger X-plore 7300 Powered Air-Purifying Respirator (PAPR)

Dräger X-plore 8000 Powered Air-Purifying Respirator (PAPR)

Dräger X-am 5100 Single-Gas Detection Device

Dräger Workstar Flexothane / PVC Splash Suit

Dräger Porta Control 3000 Test Equipment

Dräger Interlock XT Alcohol Screening Device with Immobilizer

Ponta Beam Supply System Medical Supply Units

Dräger X-am Pump External pump for multi-gas detectors

Dräger EM200-E Diesel Exhaust Measurement

Dräger PARAT Escape Hoods

Dräger Perseus A500 Ceiling-mounted version

Dräger Linea Medical Supply Units

Dräger CPS 5800 Gas-Tight Suit

Dräger CMS Chip Measurement System

TOFscan Neuromuscular transmission monitor

D Your customized anesthesia workstation DRÄGER FABIUS GS PREMIUM

Dräger X-plore 8000 Hoods, helmets, visors and masks

Dräger Interlock 7000 Alcohol Ignition Interlock Device

Flexible and ergonomic The supply unit for individual requirements DRÄGER MOVITA

Agila Systems Medical Supply Units

Dräger HPS 7000 Head Protection

Ready when you are. Dräger Interlock Information for responsible entities

Dräger X-am Mark II Pump External pump for multi-gas detectors

Dräger Agila Ceiling Arm System Medical Supply Units

Dräger X-am 8000 Multi-Gas Detection Device

Dräger X-am 3500 Multi-Gas Detection Device

Dräger Interlock XT Alcohol Screening Device with Immobilizer

D Dräger Interlock On the road with confidence

ICAN INTELLIGENT AIR FLOW DEVICE

SR 500 POWERED AIR-PURIFYING RESPIRATOR. Features. - Lightweight, balanced and ergonomic design. - Ergonomic comfort belt.

D Ready when you are Draeger Interlock 7000 Information for Interlock Participants

DURAFLOW POWERED AIR RESPIRATOR

Dräger Alcotest 6810 for DOT

spirit POWERED AIR RESPIRATOR

Dräger Interlock 7000 Alcohol Ignition Interlock Device

PRODUCT NUMBER: A EUROMASKI VL

TORNADO NON-EX POWERED AIR RESPIRATOR

Dräger HPS 6200 Firefighter's helmet

Easy-to-Install General-Purpose Cartridge Seal EZ-1

MAPAG Butterfly valve - Type BK For cryogenic applications. Installation, Maintenance and Operating Instructions

Dräger HPS 6200 Firefighter s helmet

Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects

Electric Lowering & Raising System 20kg PRODUCT TYPE. Max. weight of light fitting Lowering distance. 4. Lamp circuits. No. of circuit No.

Mirka Product News. Our stand D 65 in Hall 17.

MANUAL GEAR ACTUATORS

POWERGUARD Enhancing your diesel performance

Welding Safety Catalogue

CleanAIR. p e r s o n a l resp i r at o r y p r o t e c t i o n sys t e m s ENG

D Dräger Interlock 7000 User Guide Victoria s Alcohol Interlock Program

BASKET TRAY SYSTEM WITH PREFAB FITTINGS

PureLite XStream. Self-Contained Powered Air Purifying Visor System. User Manual

Y610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves

T205VB Series Tank Blanketing Vacuum Breakers

Dräger X-am 8000 Multi-Gas Detection Device

Unequalled kinematics

Extraction arms for every type of application

Get express service on your Subracks, Available for Shipping in as few as 15 days

Portable Digital Clamp Force Indicator

Portable Power Accessories

BETTIS GENERAL OPERATING AND MAINTENANCE INSTRUCTIONS FOR PNEUMATIC ROTARY VALVE ACTUATORS

PRODUCT NUMBER: Turbovisor DTMV-1202

PIPE EQUIPMENT SPECIALISTS LTD

POWER AND ENDURANCE THAT INSPIRE. The new battery-powered tools from Kärcher PROFESSIONAL PARK & CITY SOLUTIONS

OUR HEADQUARTERS. The only name that matters for injection and compression moulding machines. UK Slovakia Taiwan RUBBER INJECTION MACHINE SERIES

Reflective Products Color Selector

VALVCON Universal ADC-Series Sealed Lead Acid Back-Up Battery Upgrade Kits. Installation, Maintenance and Operating Instructions

25198:- 1/31/12 11:24 AM Page 2 Filtration Systems

Cabinets 19" lab racks

RM CC. Modular fuse holders for industrial class CC fuses

Reduced Bore Thread-end Ball Valves Series 33R Model C. 1/2 2 (DN 15-50) AAR No. E079024

TYPE FFET SINGLE CARTRIDGE O-RING SEAL Technical Specification

COUNTIS E. Energy Measurement for your installations MADE TO MEASURE

Rosemount 228. Toroidal Conductivity Sensor. Product Data Sheet July Series LIQ-PDS-228

Type HSR Pressure Reducing Regulator for Residential, Commercial, or Industrial Applications

MAXAIR Systems A full-capability line of particulate filtering PAPRs

MDT City. Go Topless!

metal clad wiring accessories A rugged scratch resistant metal, suitable for everyday use in commercial and industrial environments

NOVASTAR FRAME TOOLSET

The ideal solution for doors up to 1100 mm wide tested and approved to EN 1154

IMC. Battery Charger. Instruction Manual

Hup ULTIMATE VERSATILITY. MAX PROFITS.

Explosionproof Protection Simplified

Performance Through Innovation

Powered Air Purifying Respirator (PAPR) System

OBSOLETE DOCUMENT. 167D Series Switching Valves. Bulletin 71.7:167D. Introduction. Features

Get express service on cases, Available for Shipping in as few as 15 days

EXPLOSION PROOF. Diesel Engines For Hazardous Areas

Speedglas 9000 FlexView Welding Shield

Performance Through Innovation

PAPRV. Powered Air Purifying Respirator (PAPR) System. Please read these instructions carefully before using this unit. affect your health and safety.

Speedglas 9000 Welding Shield with Adflo respirator protection

FORMWORK CLEANING. MOBILE. RELIABLE. MEVA HD 9/50-4 Cage PROFESSIONAL HIGH-PRESSURE CLEANERS

1/1B. TYPE 1/1B Elastomer Bellows Seals. Product Description. Performance Capabilities. Design Features

T & M Series Couplings. Metal membrane couplings for the oil & gas industry

Polymerization High cycle valves

Table of Contents for Powered and Supplied Air Matrices

Instrumentation Products. KM Series I Metal Seated Ball Valve

CleanAIR. p e r s o n a l resp i r at o r y p r o t e c t i o n sys t e m s ENG. Ver 2.10

Endurance TM Conductivity Sensors

The Silverson way. introduction The first name in high shear mixers

Transcription:

Dräger X-plore 7500 Full Face Mask The Dräger X-plore 7500 provides reliable protection, comfort, and safety for a wide range of industrial applications where hazardous gases, vapors, and particles are present: from welding and grinding, to use in the chemical or agricultural industries. Two-stage warning device Eye-catching flashing of the display and insistent warning tone: for safety in every hazardous situation Constant air flow The volume can be tailored exactly to the user s individual needs Incrementally adjustable for every application for helmets, hoods, visors or masks Multifunctional control panel Clearly structured: everything under control at all times Regulate the air flow with the push of a button and monitor the battery status and filter exhaustion Comfort belt standard For easy wearing in any work environment Also available as a premium model ST-3220-2003 Rechargeable NiMH battery Environmentally friendly: Up to 15 hours of operating time For the greatest possible freedom of movement and independence Rechargeable separately or while installed

02 Dräger X-plore 7500 Benefits Versatile combination options For the most varied applications there is a large program of Dräger X-plore helmet, hoods and visors as well as half- and full-face masks available. The powered air purifying respirator has been tested and approved in accordance with EN 12942 or EN 12941. Clear multifunctional control panel The clear multifunctional control panel provider constant monitoring of the battery status and filter exhaustion. The air flow can also be adjusted via the multifunctional control panel. Thus everything is always under control at the press of a button. High level of wearing comfort The strength of the air flow can be adjusted to the individual requirements and can be freely adjusted to the respective application for helmets, hoods and visors or masks. Acoustic and visual warning devices Whether the service life of filters or the battery has been reached or whether the resistance is increasing or the air flow reducing, any potentially dangerous situation is indicated by a conspicuous flashing of the display and a vivid warning sound. Powerful NiMH battery With an operating time of six to ten hours the environmentally friendly NiMH grants the greatest possible moveability and independence. The NiMH can be charged separately or whilst installed. Use of standard Dräger X-plore Rd40 filters All the filters usable in this device can also be used in pure mask/filter combinations. A single filter series thus covers the requirements of two applications, and no additional filters need to be kept in stock.

Dräger X-plore 7500 03 System components Dräger X-plore 7500 NIMH rechargeable battery: 7.2 V / 4.5 Order number: R 55 344 ST-3191-2003 ST-14715-2008 Dräger X-plore 7500 UK charger Order number: R 55 345 Dräger X-plore 7500 EU charger Order number: R 55 157 ST-3198-2003 ST-3191-2003 Dräger X-plore premium comfort belt Order number: R 55 363

04 Dräger X-plore 7500 System components Dräger X-plore standard comfort belt Order number: R 55 362 ST-3198-2003 680 P3 R (incineratable) / TH/M3 P SL R Order number: 67 32 974 620 A2-P3 RD / TH/M3 A2 P SL R Order number: 67 35 895 620 A2B2-P3 RD / TH/M3 A2B2 P SL R Order number: 67 35 896

Dräger X-plore 7500 05 System components 620 A2B2E2K2 Hg-P3 RD / TH/M3 A2B2E2K2 Hg P SL R Order number: 67 35 470 ST-14727-2008 ST-3176-2003 Filter plug Rd40 for the use of the Dräger X-plore 7500 as Dräger X-plore short hood TH2, grey Order number: R 56 736 ST-12762-2007 ST-11065-2007 Dräger X-plore short hood TH2, orange Order number: R 56 737

06 Dräger X-plore 7500 System components Dräger X-plore long hood TH2, grey Order number: R 56 738 ST-12759-2007 ST-989-2008 Dräger X-plore long hood TH2, orange Order number: R 56 739 Dräger X-plore long hood TH3, white Order number: R 56 740 Dräger X-plore protective AC visor Order number: R 56 728 ST-12763-2007

Dräger X-plore 7500 07 System components Dräger X-plore protective PC visor Order number: R 56 746 ST-11066-2007 ST-12763-2007 Dräger X-plore safety helmet with visor Order number: R 56 747 Dräger X-plore 8000 Helmet with visor for X-plore 7000 Order number: R 58 325 ST-7496-2005 D-11292-2010 Dräger X-plore 4740, silicone Various sizes

08 Dräger X-plore 7500 System components Dräger X-plore Corrugated hose for X-plore Helmet R 58 325 Order number: R 58 326 ST-984-2008 D-11281-2010 Dräger X-plore 7000 Corrugated hose TM2/TM3 Order number: R 55 342 Dräger X-plore 7000 Corrugated hose TH2/TH3 Order number: R 58 969 ST-985-2008

Dräger X-plore 7500 09 Related Products Dräger X-plore 7300 The Dräger X-plore 7300 is the suitable powered air purifying respirator when it comes to protection against hazardous particles. Ideal for use in dusty atmospheres: including grinding and wood work applications, various types of welding, and pharmaceutical applications. ST-3213-2003

10 Dräger X-plore 7500 Technical Data Description Approval Airflow Battery Weight Operating period Powered Air Purifying Respirator for protection against a variety of gases, vapours and particles EN 12941 with Dräger X-plore 7000 Hoods and visors and with Dräger X-plore 8000 Helmet with visor EN 12942 with Dräger X-plore 4740/6000 half and full face masks 3 adjustable airflow levels per operating mode: Dräger X-plore 7000 Hoods and visors, Dräger X-plore 8000 Helmet with visor: 120/140/160 L/min Dräger X-plore Half and full face masks: 60/80/100 L/min NiMH rechargeable battery 7.2 V/4.5 Ah 1,150 grams (blower unit with battery) 6 10 hours (depending on adjusted airflow and concentration of contaminants) Ordering Information According to your specific application you can compile your individual set under the modular system order code R 57 500 from these components: Dräger X-plore 7500 Blower unit R 56 751 Dräger X-plore 7500 NIMH Battery R 55 344 Dräger X-plore 7500 Battery charger EU R 55 157 Dräger X-plore 7500 Battery charger UK R 55 345 Comfort belts: Dräger X-plore 7000 Comfort belt premium R 55 363 Corrugated hoses Dräger X-plore 7000 Corrugated hose TH2/TH3 R 58 969 Dräger X-plore 7000 Corrugated hose TM2/TM3 R 55 342 Dräger X-plore 7000 Corrugated hose for X-plore 8000 Helmet with visor Filter R 58 997 Filter 1140 TH/TM3 P SL R 67 38 932 Filter 1140 TH/TM3 A2 P SL R 67 38 860 Filter 1140 TH/TM3 A2B2 P SL R 67 38 783 Filter 1140 TH/TM3 ABEK2 Hg P SL R 67 38 797 Filter plug (for operation with two particle filters) R 53 344 Hoods, helmets and visors Dräger X-plore 7000 Short hood, grey TH2 R 56 736 Dräger X-plore 7000 Short hood, orange TH2 R 56 737 Dräger X-plore 7000 Long hood, grey TH2 R 56 738 Dräger X-plore 7000 Long hood, orange TH2 R 56 739 Dräger X-plore 7000 Long hood, white TH3 R 56 740 Dräger X-plore 7000 Protective face shield (PC) TH2 R 56 746 Dräger X-plore 7000 Protective face shield (AC) TH2 R 56 728 Dräger X-plore 7000 Welding visor TH2 R 55 348 Dräger X-plore 8000 Helmet with visor, black R 58 325

Dräger X-plore 7500 11 Ordering Information Half and full face masks Dräger X-plore 4740 TPE R 55 876 Dräger X-plore 4740 silicone S/M R 55 875 Dräger X-plore 4740 silicone M/L R 55 874 Dräger X-plore 6300 R 55 800 Dräger X-plore 6530 PC R 55 795 Dräger X-plore 6300 Triplex R 55 810 Dräger X-plore 6570 PC R 55 790 Dräger X-plore 6300 Triplex R 55 850

12 Dräger X-plore 7500 Notes 90 44 784 15-01-8 Communications & Sales Marketing PP LE Printed in Germany Chlorine-free environmentally compatible Subject to modifications 2015 Drägerwerk AG & Co. KGaA CORPORATE HEADQUARTERS Drägerwerk AG & Co. KGaA Moislinger Allee 53 55 23558 Lübeck, Germany www.draeger.com REGION EUROPE CENTRAL AND EUROPE NORTH Dräger Safety AG & Co. KGaA Revalstraße 1 23560 Lübeck, Germany Tel +49 451 882 0 Fax +49 451 882 2080 info@draeger.com REGION EUROPE SOUTH Dräger Safety France SAS 25, rue Georges Besse 92182 Antony Cedex Tel +33 1 46 11 56 00 Fax +33 1 40 96 97 20 europe.south@draeger.com REGION MIDDLE EAST, AFRICA Dräger Safety AG & Co. KGaA Branch Office P.O. Box 505108 Dubai, United Arab Emirates Tel +971 4 4294 600 Fax +971 4 4294 699 contactuae@draeger.com REGION ASIA PACIFIC Draeger Safety Asia Pte Ltd 25 International Business Park #04-20/21 German Centre Singapore 609916 Tel +65 6308 9400 Fax +65 6308 9401 asia.pacific@draeger.com REGION CENTRAL AND SOUTH AMERICA Dräger Panama S. de R.L. Complejo Business Park, V tower, 10th floor Panama City Tel +507 377 9100 Fax +507 377 9130 contactcsa@draeger.com Locate your Regional Sales Representative at: www.draeger.com/contact