BAUER TRAVIS PATTERN CLAW VICTAULIC STRAINERS MUFF STEAM & GROUND JOINTS STORZ QRT CFA MFB & NSW FIRE BRIGADE HOSES PNEUMATICS HOSE REELS RUBBER HYDRAULICS ACCESSORIES & 139
HOSES Bauer Type B Couplings Bauer Couplings are quick action fittings with four parts:- Male Ball, Closure Ring Female Socket and Sealing Ring. Zinc Alloy Coupling Sets Complete Sets Male Ball x Female x Hose Tails (inc Seal) Closure Rings Replacement Seals 2 21-500-032 21-510-032 21-520-032 21-530-032 21-540-032 3 21-500-048 21-510-048 21-520-048 21-530-048 21-540-048 4 21-500-064 21-510-064 21-520-064 21-530-064 21-540-064 6 21-500-096 21-510-096 21-520-096 21-530-096 21-540-096 8 21-500-128 21-510-128 21-520-128 21-530-128 21-540-128 Other sizes up to 12" and Stainless Steel made to order also available on request. A single movement engages and locks the coupling, compressing the sealing ring to ensure a leak-proof joint under either suction or pressure (150 psi working pressure) applications. The spherical construction of the ball and socket ensures the seal is equally efficient at coupling angles up to 30 degrees (less for 150 mm and 200 mm). PNEUMATICS HOSE REELS Bauer Type B Couplings Flanged Table D Male Ball x Flange (Closure ring inc.) Female Socket x Flange 2 21-550-032 3 21-550-048 21-560-048 4 21-550-064 21-560-064 6 21-550-096 21-560-096 8 21-550-128 21-560-128 RUBBER HYDRAULICS Bauer Type B Couplings Male BSP Female Socket x Male BSP (Seal not inc.) Male Ball x Male BSP 2 21-570-032 21-580-032 3 21-570-048 21-580-048 4 21-570-064 21-580-064 6 21-570-096 21-580-096 8 21-570-128 21-580-128 Bauer End Cap Strainer (Suit Female Socket) (Male closure ring inc.) 4 21-590-064 21-601-064 ACCESSORIES & Bauer Type B Couplings Various Parts 6 21-590-096 21-601-096 8 21-590-128 21-601-128 140
Bauer Type B Couplings Weld ons Bauer Type B Couplings Reducers Travis Couplings These couplings are ideally suited for use in the waste transfer and aquaculture industries. Female Socket Weld on Male Ball Weld on 3 21-681-048* 21-690-048* 4 21-681-064 21-690-064 6 21-681-096 21-690-096 8 21-681-128 21-690-128 Female x Male Female x Male 4 x 6 21-621-064-096 6 x 4 21-621-096-064 8 x 6 21-621-128-096 Zinc Plated Steel Coupling Parts Complete Sets 3 21-800-048 4 21-800-064 5 21-800-080 6 21-800-096 8 21-800-128 *90 mm ball. The entire Travis Couplings range and Adaptors are also available. When it comes to making a safe and secure connection for the movement of valuable and hazardous materials these fittings are exceptional. Made from only the best raw materials and to the highest quality manufacturing standards, Travis Couplings can be relied on to get the task done - minimising failures and maximising efficiencies. For vacuum use and working pressures up to 100 psi. HOSES PNEUMATICS HOSE REELS RUBBER HYDRAULICS ACCESSORIES & 141
HOSES Powell Power Facts: Claw Coupling Types Claw Couplings come in three variations:- Types A, B and S. Each variation offers a different connection style. These images identify the different styles available. A B S A and S Type Claw Coupling Specifications: MATERIALS: Zinc Plated Carbon Steel or 316 Stainless Steel WORKING PRESSURES: 300 psi. NATA tested & certified to 1500 psi. STANDARDS: Zinc Plated Carbon Steel Claw Couplings meet AS2074. Stainless Steel Claw Couplings meet AS2554 & AS2660. Material, Type & Thread ZP C/Steel ZP C/Steel BSPT ZP C/Steel Female BSPT 316 S/Steel 316 S/Steel Male BSPT 316 S/Steel Female BSPT PNEUMATICS HOSE REELS Claw Couplings Type A (Twin Lug) These Couplings have a recommended maximum working Pressure of 500 psi and are made from Carbon Steel or 316 Stainless Steel. It is recommended that they are attached using interlocking Claw Clamps. Type A Claw Couplings are universally interchangeable between all different sizes. 3/8 21-000-006 21-001-006 21-002-006 - - - 1/2 21-000-008 21-001-008 21-002-008 21-180-008 21-181-008 21-182-008 3/4 21-000-012 21-001-012 21-002-012 21-180-012 21-181-012 21-182-012 1 21-000-016 21-001-016 21-002-016 21-180-016 21-181-016 21-182-016 RUBBER HYDRAULICS Claw Couplings Type A Parts Iron Three Way Material and or Type End Plug Gaskets Safety Pin No More Clamps 1/2 - - - - 21-080-008 Suit ½ to 1 21-003-000 21-004-000-21-008-000 - 3/4 - - - - 21-080-012 ½ to 1 (Rubber)* - - 21-005-000 - ½ to 1 (Viton)* - - 21-005-100 - - ½ to 1^ - - 21-005-200 - - 1 - - - - 21-080-008 *Standard seal. ^ Bellow Seal ACCESSORIES & 142
Claw Couplings Type B All sizes are interchangeable. Claw Couplings Type S Type S Claw Couplings are universally interchangeable between sizes. These Couplings have a recommended maximum working pressure of 1000 psi and are made from Carbon Steel. It is recommended that they are attached using interlocking Claw Clamps. 3/8, 1/2, 3/4,1 & 1¼ Interchanges any size. 1½ & 2 Interchange. 3 Interchanges same size only. Victaulic Grooved Couplings Material & Type ZP C/Steel ZP C/Steel Male BSPT ZP C/Steel Female BSPT 3/8 21-200-006-21-202-006 1/2 21-200-008 21-201-008 21-202-008 3/4 21-200-012 21-201-012 21-202-012 1 21-200-016 21-201-016 21-202-016 Material, Type and Thread ZP C/Steel ZP C/Steel Male BSPT ZP C/Steel Female BSPT 1/2 21-100-008 21-101-008 21-102-008 3/4 21-100-012 21-101-012 21-102-012 1 21-100-016 21-101-016 21-102-016 1¼ 21-100-020 21-101-020 21-102-020 1½ 21-100-024 21-101-024 21-102-024 2 21-100-032 21-101-032 21-102-032 3 21-100-048 21-101-048 21-102-048 Stainless Steel range also available to order. Part number prefixes 21-190, 21-191 & 21-192 Part Type Roll Groove Coupling Gasket 48 59-000-048 59-009-045 60.3 59-000-060 59-009-060 73.0 59-000-073 59-009-073 88.9 59-000-088 59-009-088 114.3 59-000-114 59-009-114 168.3 59-000-168 59-009-168 Adaptors and accessories also available to order. HOSES PNEUMATICS HOSE REELS RUBBER HYDRAULICS ACCESSORIES & 143
HOSES Strainers Material, Type and Thread Zinc plated Basket Threaded BSP Zinc plated Basket ( inc.) 1½ 28-320-024 28-310-024 2 28-320-032 28-310-032 2½ 28-320-040 28-310-040 3 28-320-048 28-310-048 4 28-320-064 28-310-064 6 28-320-096 28-310-096 8 28-320-128 - PNEUMATICS Material Aluminium 2 21-400-032 3 21-400-048 4 21-400-064 HOSE REELS Muff Couplings Suit Table D, E and ANSI flanges. Extended bolt holes allow for all three drilling patterns. Used with Muff Coupling Hoses. 5 21-400-080 6 21-400-096 8 21-400-128 10 21-400-160 12 21-400-192 Cast Iron couplings coming soon. RUBBER HYDRAULICS Steam fittings & Ground Joints Use with high pressure clamps. Coupling Sets Ground Joint Complete Sets* Male Stem Component Parts Spuds Spare Parts Female Spud Male Spud Hose Stem Swivel Nut 1/2 22-400-008 22-010-008-008 22-404-008 22-406-008 22-402-008 22-403-008 3/4 22-400-012 22-010-012-012 22-404-012 22-406-012 22-402-012 22-403-012 1 22-400-016 22-010-016-016 22-404-016 22-406-016 22-402-016 22-403-016 1¼ 22-400-020 22-010-020-020 22-404-020 - - - 1½ 22-400-024 22-010-024-024 22-404-024 22-406-024 22-402-024 22-403-024 2 22-400-032 22-010-032-032 22-404-032 22-406-032 22-402-032 22-403-032 2½ 22-400-040 22-010-040-040 22-404-040-22-402-040 - 3 22-400-048 22-010-048-048 22-404-048 - - 22-403-048 4 22-400-064 22-010-064-064 - - - - *NPT threads also available to order on request. ACCESSORIES & 144
Storz Couplings Storz Coupling Caps Storz Coupling Accessories Coupling (mm) x Type (Inches) Size Material, Type and Thread Alloy Alloy Male BSPT Alloy Female BSPT 25 x 3/4 23-100-016-012 23-101-016-012 23-102-016-012 25 x 1 23-100-016-016 23-101-016-016 23-102-016-016 38 x 1½ 23-100-024-024 23-101-024-024 23-102-024-024 50 x 1½ 23-100-032-024 23-101-032-024 23-102-032-024 50 x 2 23-100-032-032 23-101-032-032 23-102-032-032 65 x 1½ 23-100-040-024 23-101-040-032 23-102-040-032 65 x 2 23-100-040-032 23-101-040-032 23-102-040-032 65 x 2½ 23-100-040-040 23-101-040-040 23-102-040-040 75 x 2 23-100-048-032 23-101-048-032 23-102-048-032 75 x 3 23-100-048-048 23-101-048-048 23-102-048-048 100 x 4 23-100-064-064 23-101-064-064 23-102-064-064 110 x 4-23-101-071-064 23-102-071-064 125 x 5 23-100-080-080 23-101-080-080 23-102-080-080* 150 x 6 23-100-096-096 23-101-096-096 23-102-096-096 *125 x 5 also available in locking variation. Part number 23-102-080-080L Material & Type Alloy Cap 25 23-103-016 38 23-103-024 50 23-103-032 65 23-103-040 65 23-103-040P 75 23-103-048 100 23-103-064 125 23-103-080 150 23-103-096 Storz Washers also available to order. Please contact your local Powell Industrial Branch for more information. Part number prefix 23-110 & 23-111 Spanner 40 65 23-120-040 50 75 23-120-048 75 50 23-120-064 P= Plastic HOSES PNEUMATICS HOSE REELS RUBBER HYDRAULICS ACCESSORIES & 145
HOSES PNEUMATICS HOSE REELS WAJAX Fittings Univeral Lug Couplings All sizes are interchangeable. QRT (Queensland Rope Thread) Fire Brigade Fittings Type and Thread Male BSP Female BSP Cap 3/4 23-051-012 23-052-012 23-053-012 1 23-051-016 23-052-016 23-053-016 1¼ 23-051-020 23-052-020 23-053-020 1½ 23-051-024 23-052-024 23-053-024 x Brass Male x Material & Type (BSP) x Male Brass Male x Male Alloy Female x Alloy Male x 2½ x ¾ - - 23-502-012 - - - 2½ x 1 - - 23-502-016 - - - 2½ x 1¼ - - 23-502-020 - - - 2½ x 1½ 23-501-024 23-510-024 23-502-024 23-511-024 23-501-024A 23-510-024A 2½ x 2 23-501-032 23-510-032 23-502-032 23-511-032 23-501-032A - 2½ x 2½ 23-501-040 23-510-040 23-502-040-23-501-040A - 2½ x 3 23-501-048 23-510-048 - - - - RUBBER HYDRAULICS QRT (Queensland Rope Thread) Fire Brigade Fittings Caps Plugs and Accessories. Brass Female Cap Alloy Female Cap Material & Type Poly Female Cap Brass Male Plug 2½ 23-520-000 23-520-001 23-520-002 23-520-010 Material & Type Ring & Tail Washer Spanner Hydrant R&T Gasket Jet Tip Female (1 Inch) 23-530-040 23-540-000 23-599-165820 23-599-165840 ACCESSORIES & 146
Victorian CFA Fittings 3 TPI Victorian CFA Fire Fitting Adaptors, Caps and Plugs. MFB Fittings 5 TPI MFB Fire Brigade Poly Sets x x Male Material & Type x Female Brass Male x Brass Male x Male 1-23-202-016 - - - 1½ 23-201-024 23-202-024 23-203-024 23-210-024 23-211-024 2 23-201-032 23-202-032* 23-203-032 23-210-032 23-211-032 2½ 23-201-040 23-202-040 23-203-040 23-210-040 23-211-040 3 23-201-048 23-202-048-23-210-048 23-211-048 Brass CFA Female x MFB Male Brass CFA Male x MFB Female Material & Type (BSP) Brass CFA MFB/ FBT Female x CFA Male *23-202-0325 size also available. S= Swivel Blanking Cap with Chain Male Blanking Plug with Chain - 23-205-000 23-205-010 23-205-020 23-220-000 23-220-001 x x Male BSP Material & Type (BSP) x Female BSP Brass Male x Brass Male x Male BSP MFB Male x Female BSP 3/4-23-302-012 - - - - 1-23-302-016 - - - - 1½ 23-301-024 23-302-024 23-303-024 23-310-024 23-311-024-2 23-301-032 23-302-032 23-303-032 23-310-032 23-311-032 23-312-032 2½ 23-301-040 23-302-040 23-303-040 23-310-040 23-311-040 23-312-040 3 23-301-048 23-302-048 23-303-048 23-310-048 23-311-048 23-312-048 Material & Type (BSP) Plastic MFB Male & Female Set 38 23-300-024 63 23-300-040 HOSES PNEUMATICS HOSE REELS RUBBER HYDRAULICS ACCESSORIES & 147
HOSES NSW Fire Fittings 5½ TPI x x Male BSP Material & Type (BSP) x Female BSP Brass Male x Brass Male x Male BSP FBT Male x Female BSP 3/4-23-402-012 - - - - 1-23-402-016 - - - - 1½ 23-401-024 23-402-024 23-403-024 23-410-024 23-411-024-2 23-401-032 23-402-032 23-403-032 23-410-032 23-411-032 23-412-032 2½ 23-401-040 23-402-040 23-403-040 23-410-040 23-411-040 23-412-040 3 23-401-048 23-402-048 23-403-048 23-410-048 23-411-048 23-412-048 PNEUMATICS HOSE REELS RUBBER BIC Couplings (John Morris) also available to order. Please contact your local Powell Industrial Branch for more information. BIC Female x. Part number prefix 23-700 BIC Female x Male BSP. Part number prefix 23-702 BIC Female x Female BSP. Part number prefix 23-703 BIC Male x. Part number prefix 23-701 BIC Male x Female BSP. Part number prefix 23-705 BIC Male x Male BSP. Part number prefix 23-711 BIC Male Plug. Part number prefix 23-715 BIC Female Cap. Part number prefix 23-718 BIC Seals & Gaskets. Part number prefix 23-730 ACCESSORIES & HYDRAULICS 148