Woven Polypropylene GTF GTF GTF GTF GTF GTF GTF GTF 170SF 180SF/190SF 200S 200 250 270 300 AASHTO AASHTO AASHTO AASHTO AASHTO AASHTO 90 125 / 101 150 / 180 200 250 270 315 (400) (556 / 449) (667 / 445) (801) (890) (1112) (1201) (1401) Elongation % 15 15 15 15 15 15 15 15 CBR Puncture 30 250 40 250 40 350 70 550 75 700 90 900 925 115 (133) (1112) (178) (1112) (178) (1557) (311) (2447) (334) (3114) (400) (4003) (445) (4115) (512) Silt Fence Thrace-LINQ, Inc. Woven Slit Film 80 80 80 80 80 80 80 80 Permittivity sec -1 0.050 0.050 0.080 0.080 0.080 0.050 0.050 0.050 WaterFlow Rate gpm/ft 2 4 11 6 6 6 4 4 4 (l/min/m 2 ) (163) (448) (244) (244) (244) (163) (163) (163) US Sieve 30 30 30 40 40 40 40 40 (mm) (0.600) (0.600) (0.600) (0.425) (0.425) (0.425) (0.425) (0.425) ft 3 3 12.5 / 15 / 17.5 12.5 / 15 / 17.5 12.5 / 15 / 17.5 12.5 / 15 / 17.5 12.5 / 15 / 17.5 12.5 / 15 / 17.5 (m) (0.9) (0.9) (3.8 / 4.6 / 5.3) (3.8 / 4.6 / 5.3) (3.8 / 4.6 / 5.3) (3.8 / 4.6 / 5.3) (3.8 / 4.6 / 5.3) (3.8 / 4.6 / 5.3) ft 3000 3000 432 / 360 / 309 432 / 360 / 309 432 / 360 / 309 360 / 300 / 258 360 / 300 / 258 360 / 300 / 258 (m) (914.4) (914.4) (131.7 / 109.7 / (131.7 / 109.7 / (131.7 / 109.7 / (109.7 / 91.4 / 78.5) (109.7 / 91.4 / 78.5) (109.7 / 91.4 / 78.5) yd 2 600 / 600 / 600 600 / 600 / 600 600 / 600 / 600 500 / 500 / 500 500 / 500 / 500 500 / 500 / 500 (m 2 (131.7 / 109.7 / (131.7 / 109.7 / (131.7 / 109.7 / ) (914.4) (914.4) (109.7 / 91.4 / 78.5) (109.7 / 91.4 / 78.5) (109.7 / 91.4 / 78.5) 140 177 101 / 103 / 106 180 / 182 / 185 180 / 182 / 185 177 / 179 / 182 189 / 191 / 194 205 / 207 / 210 (kg) (64) (80) (46 / 47 / 48) (82 / 83 / 84) (82 / 83 / 84) (80 / 81 / 83) (86 / 87 / 88) (93 / 94 / 95) 1 Contact your Thrace-LINQ distributor or representative for technical assistance and for products meeting AASHTO M288 specifications. Additional information can also be found at www.thracelinq.com. Methods and values may change without notice. Authorized Distributor: CBR puncture has replaced D4833, under AASHTO M288.
Woven Polypropylene GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF 350 400 500 700 320 370 570 400EO 400E 404 117F AASHTO AASHTO 350 / 350 400 / 400 600 / 600 700 / 700 295 / 260 450 / 320 500 / 475 370 / 220 370 / 250 400 / 315 350 / 225 (1557 / 1557) (1779 / 1779) (2669 / 2669) (3114 / 3114) (1312 / 1157) (2002/ 1423) (2224 / 2113) (1646 / 979) (1646 / 1112) (1779 / 1401) (1557 / 1) Wide Width /ft 3179 / 2711 3749 / 4030 4800 / 4800 6056 / 5515 2640 / 2460 3600 / 3240 4800 / 4800 2400 / 1740 2700 / 1740 3000 / 2760 N/A D4595 Tensile ULT (kn/m) (46 / 40) (55 / 59) (70 / 70) (88 / 80) (39 / 36) (53 / 47) (70 / 70) (35 / 25) (39 / 25) (44 / 40) (N/A) WW Elongation % 11.4 / 7.9 9.4 / 6.6 10.2 / 7.2 13.2 / 9.6 9.0 / 8.0 9.0 / 7.0 9.0 / 5.5 19.0 / 7.0 17.0 / 15.0 12.0 / 8.0 N/A CBR Puncture 120 / 120 150 / 150 1200 200 / 200 1400 250 / 250 1700 110 / 130 150 / 160 1300 180 / 180 2000 115 / 75 675 / 60 950 150 / 165 1150 110 / 75 (534 / 534) (667 / 667) (5338) (890 / 890) (6228) (1112 / 1112) (7562) (489 / 578) (4450) (668 / 712) (5785) (801 / 801) (8900) (512 / 334) (3003) (445 / 267) (4226) (667 / 734) (5115) (489 / 334) 80 80 80 80 80 80 80 90 90 90 90 Permittivity sec -1 0.150 0.160 0.136 0.109 0.600 0.900 0.400 2. 0.280 0.900 1.500 WaterFlow Rate Percent Open Area CW02215 Medium Monofilament gpm/ft 2 11 12 10 8 40 40 30 145 18 70 200 (l/min/m 2 ) (448) (489) (407) (326) (1630) (1630) (1222) (5908) (733) (2852) (8149) US Sieve 40 40 80 80 30 40 30 40 70 40 20 (mm) (0.425) (0.425) (0.180) (0.180) (0.600) (0.425) (0.600) (0.425) (0.212) (0.425) (0.850) % N / A N / A N / A N / A N / A N / A N / A 10 4 to 6 1 20 ft 15 / 17.1 15 / 17.1 15 / 17.1 15 / 17.1 15 15 15 12.5 12 15 12 (m) (4.6 / 5.2) (4.6 / 5.2) (4.6 / 5.2) (4.6 / 5.2) (4.6) (4.6) (4.6) (3.8) (3.7) (4.6) (3.7) ft 300 / 328 300 / 328 300 / 328 300 / 328 300 300 300 300 300 300 300 (m) (91.4 /.0) (91.4 /.0) (91.4 /.0) (91.4 /.0) (91.4) (91.4) (91.4) (91.4) (91.4) (91.4) (91.4) yd 2 500 / 623 500 / 623 500 / 623 500 / 623 500 500 500 416 400 500 400 (m 2 ) (91.4 /.0) (91.4 /.0) (91.4 /.0) (91.4 /.0) (91.4) (91.4) (91.4) (91.4) (91.4) (91.4) (91.4) 226 / 285 282 / 355 363 / 456 457 / 573 279 329 454 190 193 310 153 (kg) (103 / 129) (128 / 161) (165 / 207) (207 / 260) (127) (149) (206) (86) (88) (141) (69) CBR puncture has replaced D4833, under AASHTO M288.
Needlepunched Nonwoven Civil Nonwoven 120EX 125EX 130EX 140EX 145EX 150EX 160EX 180EX 225EX 245EX 250EX 275EX 350EX AASHTO AASHTO AASHTO 80 90 105 120 140 160 180 205 215 250 270 305 380 (356) (400) (467) (534) (623) (712) (801) (912) (956) (1112) (1201) (1357) (1690) Elongation % 50 50 50 50 50 50 50 50 50 50 50 50 50 Trapezoid 30 40 45 50 55 60 75 80 85 115 145 Tear (133) (178) (200) (222) (245) (267) (334) (356) (378) (445) (445) (512) (645) CBR 210 265 300 340 360 410 475 535 600 700 725 830 1050 Puncture (934) (1179) (1334) (1512) (1601) (1824) (2113) (2380) (2669) (3114) (3225) (3692) (4671) 70 70 70 70 70 70 70 70 70 70 70 70 70 Permittivity sec -1 2.20 2.10 2.00 1.80 1.50 1.50 1.50 1.50 1.30 1.20 1.20 0.90 0.70 Water Flow gpm/ft 2 160 150 145 130 110 110 110 110 95 85 85 65 50 Rate (l/min/m 2 ) (6519) (6112) (5908) (5297) (4482) (4482) (4482) (4482) (3871) (3463) (3463) (2648) (2037) US Sieve 70 70 70 70 70 80 (mm) (0.212) (0.212) (0.212) (0.212) (0.212) (0.180) (0.150) (0.150) (0.150) (0.150) (0.150) (0.150) (0.150) PHYSICAL PROPERTIES (Nominal) oz/yd 2 3.2 3.5 4 4.5 5 6 7 8 9 10 10.5 12 16 (g/m 2 ) (108) (119) (136) (153) (170) (203) (237) (271) (305) (339) (356) (407) (542) ft 12.5 / 15 12.5 / 15 12.5 / 15 12.5 / 15 12.5 / 15 12.5 / 15 12.5 / 15 12.5 / 15 12.5 / 15 12.5 / 15 12.5 / 15 12.5 / 15 12.5 / 15 (m) (3.8 / 4.6) (3.8 / 4.6) (3.8 / 4.6) (3.8 / 4.6) (3.8 / 4.6) (3.8 / 4.6) (3.8 / 4.6) (3.8 / 4.6) (3.8 / 4.6) (3.8 / 4.6) (3.8 / 4.6) (3.8 / 4.6) (3.8 / 4.6) ft 360 / 360 360 / 360 360 / 360 360 / 360 360 / 360 360 / 300 360 / 300 360 / 300 360 / 300 360 / 300 360 / 300 360 / 300 360 / 300 (m) (109.7 / 109.7) (109.7 / 109.7) (109.7 / 109.7) (109.7 / 109.7) (109.7 / 109.7) (109.7 / 91.4) (109.7 / 91.4) (109.7 / 91.4) (109.7 / 91.4) (109.7 / 91.4) (109.7 / 91.4) (109.7 / 91.4) (109.7 / 91.4) yd 2 500 / 600 500 / 600 500 / 600 500 / 600 500 / 600 500 / 500 500 / 500 500 / 500 500 / 500 500 / 500 500 / 500 500 / 500 500 / 500 (m 2 ) (418 / 502) (418 / 502) (418 / 502) (418 / 502) (418 / 502) (418 / 418) (418 / 418) (418 / 418) (418 / 418) (418 / 418) (418 / 418) (418 / 418) (418 / 418) 111 / 133 120 / 144 136 / 163 152 / 182 167 / 201 199 / 201 230 / 232 261 / 263 292 / 294 324 / 326 339 / 341 386 / 388 511 / 513 (kg) (50 / 60) (54 / 65) (62 / 74) (69 / 83) (76 / 91) (90 / 91) (104 / 105) (118 / 119) (132 / 133) (147 / 148) (154 / 155) (175 / 176) (232 / 233) CBR puncture has replaced D4833, under AASHTO M288.
Needlepunched Nonwoven Specialty Products Elongation CBR 400EX 600EX 800EX EX 1200EX 1600EX 2000EX 2400EX 2800EX 3200EX 105 160 220 270 320 425 450 500 550 600 (467) (712) (979) (1201) (1423) (1890) (2002) (2224) (2447) (2669) % 50 50 50 50 50 50 50 50 50 50 Environmental Nonwoven 45 65 90 120 150 125 200 250 270 (200) (289) (400) (445) (534) (667) (556) (890) (1112) (1201) 300 435 575 725 900 1200 1450 1750 2050 2350 (1334) (1935) (2558) (3225) (4003) (5338) (6450) (7784) (9119) (10453) 70 70 70 70 70 70 70 70 70 70 Permittivity sec -1 2.00 1.50 1.40 1.20 0.90 0.60 N/A N/A N/A N/A Water Flow Rate gpm/ft 2 147 110 85 65 40 N/A N/A N/A N/A (l/min/m 2 ) (5990) (4482) (4075) (3463) (2648) (1630) (N/A) (N/A) (N/A) (N/A) US Sieve 70 80 N/A N/A N/A N/A (mm) (0.212) (0.180) (0.150) (0.150) (0.150) (0.150) (N/A) (N/A) (N/A) (N/A) PHYSICAL PROPERTIES 2 Thickness D5199 oz/yd 2 4 6 8 10 12 16 20 24 28 32 (g/m 2 ) (136) (203) (271) (339) (407) (542) (678) (814) (949) (1085) mils 55 70 95 120 140 160 180 195 210 (mm) (1.397) (1.778) (2.413) (2.540) (3.048) (3.556) (4.064) (4.572) (4.953) (5.334) ft 12.5 / 15 15 15 15 15 15 15 / 17 15 / 17 15 / 17 15 / 17 (m) (3.8 / 4.6) (4.6) (4.6) (4.6) (4.6) (4.6) (4.6 / 5.2) (4.6 / 5.2) (4.6 / 5.2) (4.6 / 5.2) ft 360 / 360 300 300 300 300 300 150 / 150 150 / 150 150 / 150 150 / 150 (m) (109.7 / 109.7) (91.4) (91.4) (91.4) (91.4) (91.4) (45.7 / 45.7) (45.7 / 45.7) (45.7 / 45.7) (45.7 / 45.7) yd 2 500 / 600 500 500 500 500 500 250 / 283 250 / 283 250 / 283 250 / 283 (m 2 ) (418 / 502) (418) (418) (418) (418) (418) (209 / 237) (209 / 237) (209 / 237) (209 / 237) 152 / 182 216 279 341 404 529 333 / 363 396 / 433 458 / 504 521 / 575 (kg) (69 / 83) (98) (127) (155) (183) (240) (151 / 165) (180 / 196) (208 / 229) (236 / 261) CBR puncture has replaced D4833, under AASHTO M288.
Needlepunched Nonwoven Specialty Products Paving Fabric Geogrids Biaxial Geogrid AOL AOM AOH AOE TLG-11 TLG-12 AASHTO INDEX 4 90 101 120 150 in 1.0 / 1.3 1.0 / 1.3 Aperture Dimensions Nominal (400) (449) (534) (667) (mm) (25 / 33) (25 / 33) in 0.03 / 0.03 0.05 / 0.05 % 50 50 50 50 Minimum Rib Thickness Nominal Elongation (mm) (0.76 / 0.76) (1.27 / 1.27) Grab Asphalt Saturated Grab Asphalt Saturated 90 101 N / A N / A lb/ft 280 / 450 410 / 620 Tensile at 2% Strain D6637 mod (400) (449) (N/A) (N/A) (kn/m) (4.1 / 6.6) (6.0 / 9.0) lb/ft 580 / 920 810 / 1340 % 50 50 N / A N / A Tensile at 5% Strain D6637 mod (kn/m) (8.5 / 13.4) (11.8 / 19.6) lb/ft 850 / 1300 1310 / 1970 Ultimate Tensile D6637 70 70 70 70 (kn/m) (12.4 / 19.0) (19.1 / 28.7) ASPHALT RETENTION AND MELTING POINT 2 STRUCTURAL INTEGRITY Asphalt Retention Melting Point Change in Area asphalt saturated Tx 3099 %change PHYSICAL PROPERTIES 2 D6140 D276 gal/yd 2 0.20 0.20 0.24 0.25 (l/m 2 ) (0.91) (0.91) (1.09) (1.13) F 320 320 320 320 (C) (160) (160) (160) (160) Junction Efficiency GRI GG2 % Ult. Str. Flexural Stiffness + / - 15% + / - 15% + / - 15% + / - 15% Aperture Stability COE Method DURABILITY D5732 oz/yd 2 3.5 4.1 4.6 6 (g/m 2 Installation Damage Resistance D6637 ) (119) (139) (156) (203) UV Degradation Resistance 7 % 93 mg-cm 250,000 750,000 m-n/deg %SC %SW %GP Long Term Degradation Resistance 6 % 93 0.32 0.65 95 / 93 / 90 95 / 93 / 90 ft 10.5 / 12.5 10.5 / 12.5 10.5 / 12.5 10.5 / 12.5 ft 12.95 12.95 (m) (3.2 / 3.8) (3.2 / 3.8) (3.2 / 3.8) (3.2 / 3.8) (m) (3.95) (3.95) ft 360 / 360 360 / 360 360 / 360 360 / 360 ft 246 164 (m) (109.7 / 109.7) (109.7 / 109.7) (109.7 / 109.7) (109.7 / 109.7) (m) (75.0) (50.0) yd 2 420 / 500 420 / 500 420 / 500 420 / 500 yd 2 354 236 (m 2 ) (351 / 418) (351 / 418) (351 / 418) (351 / 418) (m 2 ) (296) (197) 110 / 125 126 / 144 139 / 160 176 / 204 145 139 (kg) (50 / 57) (57 / 65) (63 / 73) (80 / 93) (kg) (66) (63) The property values listed above are effective 02/06/2016 and are subject to change without notice. 1 Contact your Thrace-LINQ distributor or representative for technical assistance and for products meeting AASHTO M288 specifications. 2 Thrace-LINQ reserves the right to alter product specifications at any time without prior notice. It is the responsibility of all users to satisfy themselves that the above data are current and that the product is suitable for its intended end use. 3 Polypropylene is the constituent polymer used in the production of the Thrace-LINQ biaxial geogrids. 4 Unless noted otherwise, shown values are minimum average roll values measured according to D4759-02. 5 Resistance to loss of load capacity/structural integrity when it is subjected to mechanical installation stress in poorly graded gravel (GP), well graded sand (SW), and clayey sand (SC). Load capacity to be determined according to D6637-01 and geogrid sampled according to D5818-06. 6 Resistance to loss of load capacity or structural integrity when subjected to chemically aggressive environments in accordance CBR puncture has replaced D4833, under AASHTO M288. with EN 14030. 7 Resistance to loss of load capacity or structural integrity when subjected to ultraviolet light and aggressive weathering in accordance with EN 12224.