SWITCH ON, PRESS AND WELD Migatronic eing one of the leading suppliers of professional welding solutions since 970, Migatronic focuses on enhancing customer value even further. We develop our products after the motto Switch on, press and weld, which is an important objective in our constant striving towards making Migatronic welding machines the most user-friendly, flexible and reliable in the market. It is imperative for us to stay in close dialogue with our customers and to stay alert for new possibilities within welding technology, metallurgy and data communications. This was and continues to be our key formula for continuous success within the welding machine industry. Optimal welding solutions Migatronic does not only supply welding machines but also has a strong reputation for supplying optimal welding solutions that meet customer needs. We will gladly discuss the possibilities of finding the most optimal welding solution for our customers. In section 28 you can see a selection of customised welding equipment, which Migatronic has made available worldwide, based on our vast experience in customised solutions. High quality from a to z The increasing demands made by the industry e.g. for welding ever thinner highalloy materials make it more important to be able to control and ensure quality throughout the whole process, from the original idea to implementation of the welding solution at the customer s premises. This is achieved by a combination of employees strongly committed to quality and procedures certified according to ISO 900. Remember to ask the customers: Would you like to save gas? Would you like to weld without spatter? Would you like to weld faster? Would you like better welding quality? Would you like more efficient production? :
Step-regulated MIG/MAG AUTOMIG 8-273 Automig is a complete range of mobile, stepregulated MIG/MAG welding machines for professional sheet-metal welding. From 230 to 400 V The operating range of the machines is reflected in the fact that several of the Automigs are switchable from 230 to 400 V, have many adjustment steps, spot and interval facilities, four-stroke and the possibility of adjustment of wire-feed speed from the torch handle. All variants of Automig have excellent welding properties in the dip-transfer area using either CO 2 or mixed gas. Automig is available with an outlet for electric tools and a wide range of accessories for body work. Control panels UPS Control panel Without Spot and Interval Technical data MPS-4T Control panel With Spot and Interval, 2/4 Stroke All standard packages include 8.5M mains supply cable, 3.5M earth cable w/ clamp, wheels, cylinder holder and handle Automig 8/83/223/23 includes 0.6-0.8 wire drive rolls Automig 27/273 includes 0.8-.0 wire drive rolls *7903 Automig 273 MPS-4TF CL4 is with 4-wheel drive and includes.0v wire drive rolls (mounted) + extra wire drive rolls kit.0u AbbreviationS: MPS-4TF = With Spot and Interval, 2/4 Stroke, with Wire Speed Control in Torch Handle. UPS = Without Spot and Interval MPS-4T = With Spot and Interval, 2/4 Stroke CL-4 = With 4-wheel drive Standard package Art. no. Description Torch Unit price 790000 Automig 8 UPS x230v ML 50 3M 79000 Automig 83 UPS 3x400V ML 50 3M 790002 Automig 83 UPS 3x230V ML 50 3M 790005 Automig 223 UPS 3x400V ML 50 3M 79009 Automig 223 MPS-4TF 3x400V ML 50F 4M 790066 Automig 23 UPS x230v ML 50 3M 790067 Automig 23 MPS-4TF x230v ML 50F 3M 790055 Automig 27 UPS x230v ML 250 3M 790009 Automig 273 UPS 3x400V ML 250 3M 7900 Automig 273 UPS 3x230V ML 250 3M 7900 Automig 273 MPS-4TF 3x400V ML 250F 3M 7903 Automig 273 MPS-4TF CL4 3x400V ML 250F 3M For other types of welding hoses, please see section 23. Machine type Automig 8 Automig 83 Automig 223 Automig 23 Automig 27 Automig 273 Mains voltage +/- 5% x 230 V 3 x 230/400 V 3 x 230/400 V x 230 V x 230 V 3 x 230/400 V Fuse 230V/400V A A A 6 A 25 A A Current range 30-60 A 20-80 A 20-200 A 20-200 A 20-250 A 20-250 A Voltage steps 4 7 9 Duty cycle 35% 60 A A 50 A 40 A 90 A 200 A Open circuit voltage 9-33 V 4-30 V 4-30 V 7-47 V 4-54 V 5-34 V Dimensions H x W x L, cm 72 x 38 x 70 72 x 38 x 70 72 x 38 x 70 72 x 38 x 70 72 x 38 x 70 72 x 38 x 70 Weight, kg 52 57 64 54 7 66 3:
Accessories for Automig Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price Automig 8/22 Torches (please see section 23) Automig 83/223/273 Automig 273 C-L-4 Accessories 73940044 Alu kit.0 x x 739405 Alu kit.0 x 788657 Tool box incl. Welding torch holder x x x 788664 Welding torch holder x x x 880005 6A CEE x x x 45050333 Adaptor for wireroll D-200 x x x 889907 Plast adapter for steel spools K-300 x x x 788655 230V plug for Automig 8/22 x 788653 230V plug for Automig 83/223/273 x x Examples of accessories for Automig Tool box incl. Welding torch holder. Art. no...788657 Separate torch holder Art. no...788664 230V plug for Automig 83/223/273 Art. no...788653 Adaptor for 5 kg reel Used together with 5 kg/d200 reels Art. no...45050333 3:2
Step-regulated MIG/MAG MULTIMOTIVE Multimotive 220 is designed specifically for the gentle MIG brazing process used for galvanised and primed plates in the continuously more complex steel alloys. ut Multimotive 220 is also an all-round machine featuring 20 voltage steps and spot and interval facilities suitable for MIG brazing steel and high-tensile steel. A special choke with two outlets makes it easy to switch between the brazing and welding processes. Multimotive DUO. At the request of the automotive industry, Migatronic has developed the Multimotive DUO with two welding outlets. A configuration for two wires, e.g. a MIG braze-wire on one coil and a mild solid wire, aluminium or stainless on the other, increases the machine s flexibility. Technical data Machine type multimotive multimotive 220/220 DUo 22/22 DUO Mains voltage +/- 5% 3 x 400 V x 230 V Fuse A 6 A Current range 20-200 A 20-200 A Voltage steps 20 Duty cycle 35% 50 A 34 A Open circuit voltage 4-30 V 7.2-46.8 V Dimensions H x W x L, cm 72 x 38 x 70 72 x 38 x 70 Weight, kg 64 54/64 AbbreviationS: MPS-4TF = With Spot and Interval, 2/4 Stroke, with Wire Speed Control in Torch Handle. DUO = with two welding outlets Standard package Art. no. Description Torch Unit price 790076 Multimotive 220 MPS-4TF ML50F 3M 790084 Multimotive 22 MPS-4TF x230v ML50F 3M 790099 Multimotive Duo 220 CL-4 2*ML50F 3M 7904 Multimotive Duo 22 CL-4 2*ML50F 3M Tool box incl. Welding torch holder. Art. no...788657 All standard packages include 8.5M mains supply cable, 3M earth cable w/clamp, wheels, cylinder holder and handle. Multimotive 220/22 includes.0 wire drive rolls. Multimotive Duo 220/22 includes 0.8V wire drive rolls +.0U wire drive rolls. Accessories Compatibility Art. no. Description Unit price Multimotive 220/22 Multimotive 220/22 Duo 739405 Alu kit.0 x x 788657 Tool box incl. Welding torch holder x x 788664 Welding torch holder x x 880005 6A CEE x x 45050333 Adapter for wireroll D-200 x x 889907 Plast adapter for steel spools K-300 x x 788653 230V plug for Automig 83/223/273 x Separate torch holder Art. no...788664 4:
Step-regulated industrial MIG/MAG Compact MIG 305-385 - 445 C MIG is a range of robust, stepregulated, userfriendly and all round machines for MIG/MAG dip-transfer or spray-transfer welding, from sheet metal and light structures to thick wall plates. Primarily developed for mild steel but also applicable for stainless steel and aluminium. Many variants There is always a MIG machine with a high duty cycle for intensive quality welding day after day. Some models are supplied as C (compact) versions, others as ST versions (ST for separate wire-feed unit), and with optional air-cooling or water-cooling. For ST versions, please see section 6. Technical data AREVIATIONS: C = Compact L = Aircooled V = Watercooled UPS = Without Spot and Interval MPS-4TF = With Spot and Interval, 2/4 Stroke, with Wire Speed Control in Torch Handle. Machine type mig 305 C mig 385 C mig 445 C Mains voltage +/- 5% 3 x 230/400 V 3 x 230/400 V 3 x 230/400 V Fuse 230V/400V 6 A/ A 25 A/6 A 40 A/25 A Current range 40-300 A 40-385 A 40-445 A Max. load 0% 70 A 240 A 265 A Max. load 60% 25 A 300 A 35 A Max. load 35% 285 A 335 A 405 A Open circuit voltage, min. 4-6 V 7.4-9.2 V 7.4-9.0 V Open circuit voltage, max. 4-47 V 4.6-45.4 V 48.5-53.0 V Dimensions H x W x L, cm 7 x 44 x 90 84 x 5 x 94 84 x 5 x 94 Weight, kg 4 35 63 Standard package Art. no. Description Torch Unit price 79070320 MIG305 C-2 Air UPS ML 250 3M 7907032 MIG305 C-4 Air UPS ML 250 3M 79070374 MIG305 C-2 Air MPS-4TF ML 250F 3M 790704 MIG305 C-4 Air MPS-4TF ML 250F 3M 79070322 MIG385 C-4 Air w/o V/A ML 300 3M 79070323 MIG445 C-4 Air w/o V/A ML 360 3M 79070324 MIG445 C-4 Water w/o V/A MV450 3M All standard packages include 5M mains supply cable, 3M earth cable w/clamp, wire drive rolls, wheels, cylinder holder and handle. See price examples for a configurated MIG machines overleaf. 5:
Price list MIG 305-385 - 445 Compact Price examples of configurated standard machines MIG 305 C-4 AIR UPS Unit price Power source 79070380 MIG305 C2/C4 Cooling unit Air Mains voltage 400V Wire feed type 4 wheel drive Control box UPS - without spot and stitch Torch 8095250 ML 250 3M Earth cable 80502503 3M 25MM2 Wire drive rolls 73940054 KIT MWF 0.8 V White Power plug No power plug Accessories No accessories MIG 305 C-4 Air UPS 7907032 MIG 445 C-4 WATER W/O V/A Unit price Power source 79070382 MIG445 C Cooling unit Water Mains voltage 400V Control box w/o Volt - Ammeter Torch 80295450 MV450 3M Earth cable 80505003 Earth cable 3M/50mm2 Wire drive rolls 73940057 KIT MWF.2 V Red Power plug No power plug Extra features No extra features MIG 445 C-4 Water w/o V/A 79070324 Configuration possibilities and accessories Configuration possibilities and accessories Art. no. Description Unit price Configuration 79070380 MIG305 C2/C4 Config. 7907038 MIG385 C Config. 79070382 MIG445 C Config. Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price MIG305 C-2 MIG305 C-4 MIG385 C MIG445 C Cooling unit Air x x x x Water x x Mounted Mains voltage 400V x x x x 230/400V (MIG 305C) x x 230/400V (MIG 385C) x 230/400V (MIG 445C) x Wire feed type 2 wheel drive x 4 wheel drive x 4 wheel drive Heavy Duty x 5:2
Configuration possibilities and accessories Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price MIG305 C-2 MIG305 C-4 MIG385 C MIG445 C Control box UPS x x MPS 4T x x MPS 4TF x x w/o Digital V/A x x w/digital V/A x x Torches (please see in section 23) Earth Cables 80502503 Earth cable 3M/25mm2 x x 80502505 Earth cable 5M/25mm2 x x 805025 Earth cable M/25mm2 x x 8050255 Earth cable 5M/25mm2 x x 80503503 Earth cable 3M/35mm2 x x x 80503505 Earth cable 5M/35mm2 x x x 805035 Earth cable M/35mm2 x x 8050355 Earth cable 5M/35mm2 x x 80505003 Earth cable 3M/50mm2 x x 80505005 Earth cable 5M/50mm2 x x 805050 Earth cable M/50mm2 x x 8050505 Earth cable 5M/50mm2 x x 80507003 Earth cable 3M/70mm2 x 80507005 Earth cable 5M/70mm2 x 805070 Earth cable M/70mm2 x 80507020 Earth cable 20M/70mm2 x Wire drive rolls (please see in section 30) 73940083 KIT MWF 0.6 V White/black x x x For steel 73940054 KIT MWF 0.8 V White x x x For steel 739403 KIT MWF 0.9 U Grey/blue x x x For alu 739404 KIT MWF 0.9 V Grey/blue x x x For steel 73940055 KIT MWF.0 V lue x x x For steel 73940056 KIT MWF.0 U lue x x x For Alu 73940057 KIT MWF.2 V Red x x x For steel 73940058 KIT MWF.2 U Red x x x For Alu 73940059 KIT MWF.2 U Grooved red x x x For Flux Cored Wire 73940060 KIT MWF.4 U Orange red x x x For Alu 7394006 KIT MWF.4 U Grooved orange/red x x x For Flux Cored Wire 73940085 KIT MWF.6 V Grooved pink/red x x x For steel 73940062 KIT MWF.6 U Pink/red x x x For Alu 73940063 KIT MWF.6-U Grooved pink/red x x x For Flux Cored Wire 73940064 KIT MWF 2.0 U Yellow x x x For Alu 73940065 KIT MWF 2.0 U Grooved yellow x x x For Flux Cored Wire 73940066 KIT MWF 2.4 U eige/yellow x x x For Alu 73940067 KIT MWF 2.4 U Grooved beige/yellow x x x For Flux Cored Wire Power plug 6A CEE x x x Mounted 32A CEE x x x x Mounted 63A CEE x x x x Mounted Extra features PUSH PULL KIT w/o torch x x Mounted Accessories 889907 Plastic adaptor for wire spool x x x x 5:3
Step-regulated industrial MIG/MAG MIG 305-385 - 445-545 S MIG is a range of robust, stepregulated, userfriendly and all round machines for MIG/MAG dip-transfer or spray-transfer welding, from sheet metal and light structures to thick wall plates. Primarily developed for mild steel but also applicable for stainless steel and aluminium. Many variants There is always a MIG machine with a high duty cycle for intensive quality welding day after day. Some models are supplied as C (compact) versions, others as ST versions (ST for separate wire-feed unit), and with optional air-cooling or water-cooling. For C versions, please see section 5. Technical data AREVIATIONS: S / ST = Separate wire-feed unit L = Aircooled V = Watercooled Machine type mig 305 ST MIG 385 ST MIG 445 ST MIG 545 ST Mains voltage +/- 5% 3 x 230/400 V 3 x 230/400 V 3 x 230/400 V 3 x 230/400 V Fuse 230V/400V 6 A/ A 25 A/6 A 40 A/25 A 50 A/35 A Current range 40-300 A 40-385 A 40-445 A 40-545 A Max. load 0% 70 A 240 A 265 A 350 A Max. load 60% 25 A 300 A 35 A 430 A Max. load 35% 285 A 335 A 405 A 505 A Open circuit voltage, min. 4-6 V 7.4-9.2 V 7.4-9.0 V 7.4-9.0 V Open circuit voltage, max. 4-47 V 4.6-45.4 V 48.5-53.0 V 54.0-59.0 V Dimensions H x W x L, cm 30 x 44 x 90 43 x 5 x 94 43 x 5 x 94 43 x 5 x 94 Weight, kg 30 63 9 229 Standard package Art. no. Description Torch Unit price 79070325 MIG305 ST Air MWF8 ML 250 3M 79070326 MIG385 ST Air MWF8 ML 300 3M 79070330 MIG385 ST Air MWF V/A ML 300 3M 79070327 MIG385 ST Water MWF8 MV 450 3M 7907033 MIG385 ST Water MWF MV 450 3M 79070328 MIG445 ST Water MWF8 MV 450 3M 79070332 MIG445 ST Water MWF MV 450 3M 79070329 MIG545 ST Water MWF8 MV 550 3M 79070333 MIG545 ST Water MWF MV 550 3M All standard packages include 5M mains supply cable,.5m interconnection (MWF8 w/fixed connection, MWF w/quick connection), 3M earth cable w/clamp, wire drive rolls, wheels, cylinder holder and handle See price examples for a configurated MIG machines overleaf. 6:
Price list MIG 305-385 - 445-545 S Price examples of configurated standard machines MIG 305 ST AIR MWF8 Unit price Powersource Cooling unit Mains voltage Wire feed unit Control box Torch Interconnection Earth cable Wire drive rolls Power plug Extra features Accessories MIG 305 ST Air MWF8 79070325 79070383 MIG305 S Air 400V MWF8 Fixed interconnection w/o Volt & Ammeter 8095250 ML 250 3M 7432323.5M 35MM2 Air 80502503 3M 25MM2 73940054 KIT MWF 0.8 V White No power plug No extra features No accessories MIG 445ST WATER MWF Unit price Power source Cooling unit Mains voltage Wire feed unit Control box Torch Interconnection Earth cable Wire drive rolls Power plug Extra features Accessories 79070385 MIG445 S Water 400V MWF w/digital Volt & Ammeter 80295450 MV450 3M 74324932.5M 50MM2 Water 80505003 Earth cable 3M/50mm2 73940057 KIT MWF.2 V Red No power plug No extra features No accessories MIG 445 ST Water MWF 79070332 Configuration possibilities and accessories Configuration possibilities and accessories Art. no. Description Unit price Configuration 79070383 MIG 305 S Config. 79070384 MIG 385 S Config. 79070385 MIG 445 S Config. 79070386 MIG 545 S Config. Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price MIG305 S MIG385 S MIG445 S MIG545 S Cooling unit Air x x x x Mounted Water x x x Mounted 6:2
Configuration possibilities and accessories Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price MIG305 S MIG385 S MIG445 S MIG545 S Mains voltage 400V x x x x 230/400V (MIG 305S) x 230/400V (MIG 385S) x 230/400V (MIG 445S) x 230/400V (MIG 545S) x Wire feed unit MWF8 Fixed x x x x w/o quick connection MWF8 w/plug x x x x w/quick connection MWF x x x x w/quick connection Double MWF x x x w/quick connection MWF 2 x x x x w/quick connection MWF5 x x x x w/quick connection Trolley for MWF5 racket x x x x Only for MWF5 Trolley x x x x Only for MWF5 Trolley + bracket x x x x Only for MWF5 Trolley/Sledge for MWF2 78857003 Wire reel holder x x x x Only for MWF2 78857006 Sliding bracket x x x x Only for MWF2 Control box w/o Digital V/A x x x x w/digital V/A x x x x Torches (please see section 23) Interconnection 7432324 Interconnection.5M 35MM2 Air x x x 74323243 Interconnection 5M 35MM2 Air x x x 74323245 Interconnection M 35MM2 Air x x x 74324933 Interconnection 5M 50MM2 Air x x x 74324935 Interconnection M 50MM2 Air x x x 74324937 Interconnection 20M 50MM2 Air x x x 7432593 Interconnection.5M 70MM2 Air x x x 74325933 Interconnection 5M 70MM2 Air x x x 74325935 Interconnection M 70MM2 Air x x x 74325937 Interconnection 20M 70MM2 Air x x x 7432323 Interconnection.5M 35MM2 Air x x 74323233 Interconnection 5M 35MM2 Air x x 74323235 Interconnection M 35MM2 Air x x 74324923 Interconnection 5M 50MM2 Air x x 74324925 Interconnection M 50MM2 Air x x 7432594 Interconnection.5M 70MM2 Air x x x 74325943 Interconnection 5M 70MM2 Air x x x 74325945 Interconnection M 70MM2 Air x x x 74325947 Interconnection 20M 70MM2 Air x x x Only for MWF5, MWF8 with quick connection, MWF and MWF2 - Aircooled Only for MWF8 with fixed connection - Aircooled 6:3
Configuration possibilities and accessories Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price MIG305 S MIG385 S MIG445 S MIG545 S Interconnection 74324932 Interconnection.5M 50MM2 Water x x 74324934 Interconnection 5M 50MM2 Water x x 74324936 Interconnection M 50MM2 Water x x 74325932 Interconnection.5M 70MM2 Water x x x 74325934 Interconnection 5M 70MM2 Water x x x 74325936 Interconnection M 70MM2 Water x x x 74325938 Interconnection 20M 70MM2 Water x x x 74325940 Interconnection 30M 70MM2 Water x x x 74326932 Interconnection 2M 95MM2 Water x x x 74326934 Interconnection 5M 95MM2 Water x x x 74326936 Interconnection M 95MM2 Water x x x 74326938 Interconnection 20M 95MM2 Water x x x 74323232 Interconnection.5M 35MM2 Water x 74323234 Interconnection 5M 35MM2 Water x 74323236 Interconnection M 35MM2 Water x 74324922 Interconnection.5M 50MM2 Water x x 74324924 Interconnection 5M 50MM2 Water x x 74324926 Interconnection M 50MM2 Water x x 74324928 Interconnection 5M 50MM2 Water x x 74325942 Interconnection.5M 70MM2 Water x x x 74325944 Interconnection 5M 70MM2 Water x x x 74325946 Interconnection M 70MM2 Water x x x 74325948 Interconnection 20M 70MM2 Water x x x Earth Cables 80502503 Earth cable 3M/25mm2 x 80502505 Earth cable 5M/25mm2 x 805025 Earth cable M/25mm2 x 8050255 Earth cable 5M/25mm2 x 80503503 Earth cable 3M/35mm2 x x 80503505 Earth cable 5M/35mm2 x x 805035 Earth cable M/35mm2 x 8050355 Earth cable 5M/35mm2 x 80505003 Earth cable 3M/50mm2 x x 80505005 Earth cable 5M/50mm2 x x 805050 Earth cable M/50mm2 x x 8050505 Earth cable 5M/50mm2 x x 80507003 Earth cable 3M/70mm2 x x 80507005 Earth cable 5M/70mm2 x x 805070 Earth cable M/70mm2 x 80507020 Earth cable 20M/70mm2 x 80509503 Earth cable 3M/95mm2 x 80509505 Earth cable 5M/95mm2 x 805095 Earth cable M/95mm2 x 80509520 Earth cable 20M/95mm2 x Only for MWF5, MWF8 with quick connection, MWF and MWF2 - Watercooled Only for MWF8 with fixed connection - Waterooled 6:4
Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price MIG305 S MIG385 S MIG445 S MIG545 S Wire drive rolls (please see section 30) 73940083 KIT MWF 0.6 V White/black x x x x For steel 73940054 KIT MWF 0.8 V White x x x x For steel 739403 KIT MWF 0.9 U Grey/blue x x x x For alu 739404 KIT MWF 0.9 V Grey/blue x x x x For steel 73940055 KIT MWF.0 V lue x x x x For steel 73940056 KIT MWF.0 U lue x x x x For Alu 73940057 KIT MWF.2 V Red x x x x For steel 73940058 KIT MWF.2 U Red x x x x For Alu 73940059 KIT MWF.2 U Grooved red x x x x For Flux Cored Wire 73940060 KIT MWF.4 U Orange red x x x x For Alu 7394006 KIT MWF.4 U Grooved orange/red x x x x For Flux Cored Wire 73940085 KIT MWF.6 V Grooved pink/red x x x x For steel 73940062 KIT MWF.6 U Pink/red x x x x For Alu 73940063 KIT MWF.6-U Grooved pink/red x x x x For Flux Cored Wire 73940064 KIT MWF 2.0 U Yellow x x x x For Alu 73940065 KIT MWF 2.0 U Grooved yellow x x x x For Flux Cored Wire 73940066 KIT MWF 2.4 U eige/yellow x x x x For Alu 73940067 KIT MWF 2.4 U Grooved beige/yellow x x x x For Flux Cored Wire Power plug 6A CEE x x Mounted 32A CEE x x x Mounted 63A CEE x x x x Mounted Extra features PUSH PULL KIT w/o torch x x x x Only for MWF/2 Mounted Accessories 78856008 Relief arm x x x x Only for MWF8/ 788667 Trolley for MWF 8///5/4 x x x x Only for MWF8/ 788692 Control panel cover MWF8// x x x x Only for MWF8/ 7886208 Handle MWF 8---5 x x x x Std. in MWF. Option in MWF8 7886287 Cover for box x x x x Only for MWF5 889907 Plastic adaptor for wire spool x x x x Only for MWF8//2 Examples of accessories for MIG S Machines Relief arm Art. no...78856008 Plastic adaptor for wire spool Art. no...889907 Double MWF 6:5
Thyristor-regulated MIG/MAG KMX KMX 550 is among the strongest thyristor controlled MIG/MAG and MMA machines in the market for heavy duty welding operations in shipyards and production, such as welding of boilers, wind-turbine towers and other thick materials using solid and flux-cored wires or covered electrodes in steel, stainless steel and aluminium. In addition, the machine is powerful enough for carbon arc gouging. The control panel and digital output of welding data, such as wire feed speed and volt/voltage, are placed in the separate wire-feed unit featuring our stable four wheel drive system. To underline the machine s adjustment to outdoor and hostile environment, protection class IP 23 is a matter of course. Technical data Machine type KMX 550 Mains voltage +/- 5% Fuse Current range DC, MIG Current range DC, MMA Duty cycle 0% 3 x 400 V 35 A 40-550 A 60-550 A 425 A/35.25 V Duty cycle 60% 525 A/4.5 V Open circuit voltage Voltage steps 5-60 V Stepless Protection class IP 23 Dimensions H x W x L, cm 43 x 5 x 94 Weight, kg 229 AREVIATIONS: ST = Separate wire-feed unit Standard package Art. no. Description Torch Unit price 79038363 KMX 550 ST Water MV500 FKS F3M The standard package includes 5M mains supply cable, 2M interconnection w/quick connection, 3M earth cable w/clamp, wire drive rolls, wheels,cylinder holder and handle Price examples of configurated standard machines KMX 550 ST Water Unit price Powersource 79038375 KMX 550 Wire feeder MWF Cooling unit Mains voltage Remote control plug Torch Interconnection Earth cable Electrode cable Wire drive rolls Power plug Extra features Accessories KMX 550 ST Water 79038363 Water 400V No remote control plug 80294700 MV500 FKS F3M 74326932 Interconnection 2M 95MM2 W 80509503 3M 95MM2 No electrode cable 73940057 KIT MWF.2 V Red No power plug No extra features No accessories 7:
Configuration possibilities and accessories Configuration possibilities and accessories Art. no. Description Unit price Configuration 79038375 KMX 550 Config. Wire feeders MWF Double MWF MWF2 MWF5 Trolley for MWF5 racket Trolley Trolley + bracket Trolley/Sledge for MWF2 78857003 Wire reel holder 78857006 Sliding bracket Cooling unit Air Water Mains voltage 400V 230/400V Remote control plug Remote control plug Torches (please see section 23) Comments Only for MWF5/. Not available in connection with push pull Interconnection 7432593 Interconnection.5M 70MM2 Air 74325933 Interconnection 5M 70MM2 Air 74325935 Interconnection M 70MM2 Air 74325937 Interconnection 20M 70MM2 Air 74326932 Interconnection 2M 95MM2 Water 74326934 Interconnection 5M 95MM2 Water 74326936 Interconnection M 95MM2 Water 74326938 Interconnection 20M 95MM2 Water Earth Cables 80507003 Earth cable 3M/70mm2 80507005 Earth cable 5M/70mm2 80509503 Earth cable 3M/95mm2 80509505 Earth cable 5M/95mm2 805095 Earth cable M/95mm2 80509520 Earth cable 20M/95mm2 Electrode Cables 8055003 Electrode cable 3M/50MM2 8055005 Electrode cable 5M/50 MM2 80550 Electrode cable M/50MM2 8057003 Electrode cable 3M/ 70MM2 8057005 Electrode cable 5M/70MM2 80570 Electrode cable M/70MM2 805705 Electrode cable 5M/70MM2 8057020 Electrode cable 20M/70MM2 7:2
Configuration possibilities and accessories Comments Art. no. Description Unit price Wire drive rolls (please see section 30) 73940083 KIT MWF 0.6 V White/black For steel 73940054 KIT MWF 0.8 V White For steel 739403 KIT MWF 0.9 U Grey/blue For alu 739404 KIT MWF 0.9 V Grey/blue For steel 73940055 KIT MWF.0 V lue For steel 73940056 KIT MWF.0 U lue For Alu 73940057 KIT MWF.2 V Red For steel 73940058 KIT MWF.2 U Red For Alu 73940059 KIT MWF.2 U Grooved red For Flux Cored Wire 73940060 KIT MWF.4 U Orange red For Alu 7394006 KIT MWF.4 U Grooved orange/red For Flux Cored Wire 73940085 KIT MWF.6 V Grooved pink/red For steel 73940062 KIT MWF.6 U Pink/red For Alu 73940063 KIT MWF.6-U Grooved pink/red For Flux Cored Wire 73940064 KIT MWF 2.0 U Yellow For Alu 73940065 KIT MWF 2.0 U Grooved yellow For Flux Cored Wire 73940066 KIT MWF 2.4 U eige/yellow For Alu 73940067 KIT MWF 2.4 U Grooved beige/yellow For Flux Cored Wire Power plug 63A CEE Extra features PUSH PULL KIT w/o torch Only for MWF/2 Accessories 788665 Synergic kit Only for MWF5//2 7885028 Remote control MIG/MAG 2 potmeters Only for MWF 7885029 Remote control MIG/MAG potmeter Only for MWF 788679 Kit for dinse MWF Only for MWF 788680 Kit for dinse MWF2 Only for MWF2 78856008 Relief arm Only for MWF 7886287 Cover for box Only for MWF5 788667 Trolley for MWF Only for MWF Examples of accessories for KMX Relief arm Art. no...78856008 Remote control unit for MMA and MIG/MAG potmeter, 8 pole Art. no...7885029 2 potmeters, 8 pole Art. no...7885028 Double MWF 7:3
Inverterbased MIG/MAG OMEGA 80-220 - 270 Migatronic s new range of compact MIG/MAG inverters, the Omega 80, Omega 220 and Omega 270, is targeted at sheet metal repair shops and the light industry. Infinitely variable and fully digital welding machines with automated functions at all levels - from heavy duty to quite simple MIG/MAG welding jobs, using small or large wire-drive rolls. It s quite simple: once the main parameters are set, the machine will automatically adjust all other parameters. The quality of the machines is underlined by the standard equipment which includes 4-roll wire-feed system and diffusion-slow gas hoses. Three machines three control panels The three three-phase welding machines of the Omega range, with a maximum output of 80 A, 220 A and 270 A respectively, are combinable with three control panels with different functions and specialities. Control panels Omega asic for trades & assembly, steel. Technical data Omega Automig for professional auto repair shops. Omega Advanced for the light industry. MACHINE TYPE omega 80 omega 220 omega 270 Mains voltage +/ 5% 3 x 400 V 3 x 400 V 3 x 400 V Fuse A A A Duty cycle 0% at 40 C 5 A 45 A 75 A Duty cycle 60% at 40 C 25 A 70 A 95 A Open circuit voltage 65 V 65 V 65 V Current range - 80 A - 220 A - 270 A Protection class IP 23 IP 23 IP 23 Norm EN60974-/5/ EN60974-/5/ EN60974-/5/ Dimensions H x W x L, cm 48 x 24 x 65 48 x 24 x 65 48 x 24 x 65 Weight, kg 24 25 26 8:
Price list Omega Standard Package Art. no. Omega Torch Unit price 79547 Omega 80 asic w/o trolley ML 50 3M 79547 Omega 80 Automig w/o trolley ML 50 3M 795472 Omega 80 Advanced w/o trolley ML 50 3M 795475 Omega 220 asic w/o trolley ML 240 3M 795476 Omega 220 Automig w/o trolley ML 240 3M 795477 Omega 220 Advanced w/o trolley ML 240 3M 7954720 Omega 270 asic w/o trolley ML 240 3M 795472 Omega 270 Automig w/o trolley ML 240 3M 7954722 Omega 270 Advanced w/o trolley ML 240 3M All standard packages include 8.5M mains supply cable, 3M earth cable w/clamp,.7m diffusion-slow gas hose, 4-wheel wire drive rolls 0.8V and handle Price examples of configurated standard machines Omega 80 asic w/o trolley Unit price Powersource 7954700 Omega 80 Mains voltage 400V Control box asic Trolley No trolley Torch 809550 ML 50 3M Earth cable 80502503 3M 25MM2 Wire drive rolls 73940054 KIT MWF 0.8 V White Power plug No power plug Omega 270 Advanced w/o trolley 79547 asic control panel Omega 270 Advanced w/o trolley Unit price Powersource 7954702 Omega 270 Mains voltage 400V Control box Advanced Trolley No trolley Torch 8095240 ML 240 3M Earth cable 80503503 3M 35MM2 Wire drive rolls 73940054 KIT MWF 0.8 V White Power plug No power plug Omega 270 Advanced w/o trolley 7954722 Advanced control panel Configuration possibilities and accessories Art. no. Description Unit price Konfiguration 7954700 Omega 80 Config. 795470 Omega 220 Config. 7954702 Omega 270 Config. Konfigurationsmuligheder og tilbehør Compatibility Comments Art. no. Description Unit price Omega 80 Omega 220 Omega 270 Mains voltage 400V x x x Control box asic x x x Automig x x x Advanced x x x 8:2
Configuration possibilities and accessories Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price Omega 80 Omega 220 Omega 270 Trolleys 78857045 Omega trolley small x x x 78857044 Omega trolley large x x x Torches (please look in section 23) Earth Cables 80502503 Earth cable 3M/25mm2 x x 80502505 Earth cable 5M/25mm2 x x 805025 Earth cable M/25mm2 x x 8050255 Earth cable 5M/25mm2 x x 80503503 Earth cable 3M/35mm2 x x 80503505 Earth cable 5M/35mm2 x x 805035 Earth cable M/35mm2 x x 8050355 Earth cable 5M/35mm2 x x 80505003 Earth cable 3M/50mm2 x 80505005 Earth cable 5M/50mm2 x 805050 Earth cable M/50mm2 x 8050505 Earth cable 5M/50mm2 x Wire drive rolls (please look in section 30) 73940083 KIT MWF 0.6 V White/black x x x For steel 73940054 KIT MWF 0.8 V White x x x For steel 73940055 KIT MWF.0 V lue x x x For steel 73940056 KIT MWF.0 U lue x x x For Alu Power plug 6A CEE x x x Mounted 32A CEE x x x Mounted 63A CEE x x x Mounted Examples of accessories for Omega Large trolley for Omega Multi-functional trolley with cable coil-up, lifting eye and tool tray. Art. no...78857044 Small trolley for Omega Art. no...78857045 8:3
Inverter-based MIG/MAG with MMA SIGMA 2 300-400 -500 C A flexible solution The Sigma range consists of three power sources (300, 400 and 500 A), freely combinable with four control panels with or without pulse: Sigma 2 300 C: aircooled and primarily for diptransfer welding using solid wires in moderate wall thicknesses. Also suitable for MMA welding applications to meet the customers requerments. Sigma 2 400 is supplied as a C or S model and with the possibility of an extra wire-feed unit to avoid reconfiguration if the welder switches from one wire to another between welding operations. Sigma 2 500 is supplied as a C or S model. A heavy-duty machine accommodating wire diameters of up to.6 mm and suitable as a power source for automated applications. Control panels AREVIATIONS: C = Compact L = Aircooled V = Watercooled asic asic control panel for simple and routine welding applications. Art. no...7634 Technical data Advanced Advanced control panel featuring DUO Plus and sequence spaces for userdefined parameter settings and the possibility of individualised fine-tuning. Art. no...7634 Synergic Synergic control panel with DUO Plus, more than 75 welding programs and full synergy between the parameters chosen. Art. no...76342 Machine type Sigma 2 300 C Sigma 2 400 C Sigma 2 500 C Mains voltage +/- 5% 3 x 400 V 3 x 400 V 3 x 400 V Fuse 6 A 20 A 32 A Current range 5-300 A 5-400 A 5-500 A Duty cycle 40 C (MIG/MAG) 270 A/0% 290 A/0% 420 A/0% Duty cycle 40 C (MIG/MAG) 300 A/80% 350 A/60% 450 A/60% Duty cycle 40 C (MIG/MAG) - 400 A/40% 500 A/55% Duty cycle 20 C (MIG/MAG) 300 A/0% 330 A/0% 475 A/0% Duty cycle 20 C (MIG/MAG) - 400 A/70% 500 A/80% Dimensions H x W x L, cm ) 92.5 x 54.5 x 9 5 x 54.5 x 9 92.5 x 54.5 x 9 Weight, kg 58 2) 69 2) 7 2) ) Including trolley. 2) Does not include welding hose, cables, wire spool or any cooling liquid. Pulse Pulse control panel featuring DUO Plus and more than 40 welding programs. One of the most user-friendly control panels on the market for advanced pulse machines. Art. no...76343 9:
Price list Sigma 2 Compact Standard Package Art. no. SIGMA C inverter Torch Unit price 79544 Sigma² 300 C-L asic ML 360 3M 79544 Sigma² 300 C-L Advanced ML 360 3M 7954442 Sigma² 300 C-L Sync ML 360 3M 7954460 Sigma² 300 C-L Pulse ML 360 3M Art. no. SIGMA C S inverter Torch Unit price 795444 Sigma² 400 C-V asic MV 400 FKS 3M 795445 Sigma² 400 C-V Advanced MV 400 FKS 3M 7954444 Sigma² 400 C-V Synergic MV 400 FKS 3M 7954462 Sigma² 400 C-V Pulse MV 400 FKS 3M 7954496 Sigma² 300 C-V asic MV 450 3M 7954497 Sigma² 300 C-V Advanced MV 450 3M 7954498 Sigma² 300 C-V Synergic MV 450 3M 7954499 Sigma² 300 C-V Pulse MV 450 3M 7954470 Sigma² 500 C-L asic ML 360 3M 795447 Sigma² 500 C-L Advanced ML 360 3M 7954472 Sigma² 500 C-L Synergic ML 360 3M 7954473 Sigma² 500 C-L Advanced ML 360 3M 795442 Sigma² 400 C-L asic ML 360 3M 795443 Sigma² 400 C-L Advanced ML 360 3M 7954443 Sigma² 400 C-L Synergic ML 360 3M 795446 Sigma² 400 C-L Pulse ML 360 3M 7954474 Sigma² 500 C-V asic MV 500 FKS 3M 7954475 Sigma² 500 C-V Advanced MV 500 FKS 3M 7954476 Sigma² 500 C-V Sync MV 500 FKS 3M 7954477 Sigma² 500 C-V Pulse MV 500 FKS 3M All standard packages include standard software package, 8.5M mains supply cable, 3M earth cable w/clamp, wire drive rolls, handle, torch holder and standard trolley w/bottle carrier. Price examples of configurated standard machines SIGMA 2 400 C-V ADVANCED Unit price Powersource 7954402 Sigma² 400 C Cooling unit Water Flow control No flow control Gasregulation No gas control kit Control box Advanced Software 64542 Standard package Trolley Standard trolley Remote control plug No remote control plug Prepared for Multifeeder No Prepared for Robotinterface No Torch 80295602 MV 400 FKS 3M Earth cable 80507003 3M 70MM2 Electrode cable No electrode cable Wire drive rolls 73940057 KIT MWF.2 V Red Power plug No power plug Extra features No extra features Accessories No accessories Sigma 2 400 C-V Advanced 795445 Advanced control panel 9:2
Configuration possibilities and accessories Configuration possibilities and accessories Art. no. Description Unit price Configuration 7954400 Sigma² 300 C Config. 7954402 Sigma² 400 C Config. 7954404 Sigma² 500 C Config. Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price Sigma 2 300C Sigma 2 400C Sigma 2 500C Cooling unit Air x x x Water x x x Mounted Waterflow control Waterflow control x x x Mounted Gasregulation IGC - Intelligent Gas Control x x x Trolley Mandatory ed for rack x x x Mounted Standard trolley x x x Mounted Trolley Autotrafo x x x For multivoltage input. Mounted Earth Cables Remote control plug x x x Not in combination with push-pull/ Mig-Manager. Mounted Multifeeder/Robofeeder Prepared for Multifeeder x x x Prepared for Robotinterface x x x Multifeeder x x x 2 Multifeeders x x x Control box asic x x x Advanced x x x Synergic x x x Pulse x x x Software 64542 Standard package x x x 645422 Standardplus package x x x 645423 Special package x x x w/powerarc Torches (please see section 23) Earth Cables 80503503 Earth cable 3M/35mm2 x 80503505 Earth cable 5M/35mm2 x 80505003 Earth cable 3M/50mm2 x 80505005 Earth cable 5M/50mm2 x 805050 Earth cable M/50mm2 x 8050505 Earth cable 5M/50mm2 x 80507003 Earth cable 3M/70mm2 x x 80507005 Earth cable 5M/70mm2 x x 805070 Earth cable M/70mm2 80507020 Earth cable 20M/70mm2 80509503 Earth cable 3M/95mm2 x x 80509505 Earth cable 5M/95mm2 x x 805095 Earth cable M/95mm2 x x 80509520 Earth cable 20M/95mm2 x x 9:3
Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price Sigma 2 300C Sigma 2 400C Sigma 2 500C Comments Electrode Cables 8053503 Electrode cable 3M/35MM2 x 8053505 Electrode cable 5M/35MM2 x 8055003 Electrode cable 3M/50MM2 x x x 8055005 Electrode cable 5M/50 MM2 x x x 80550 Electrode cable M/50MM2 x x x 8057003 Electrode cable 3M/ 70MM2 x x 8057005 Electrode cable 5M/70MM2 x x 80570 Electrode cable M/70MM2 x x 805705 Electrode cable 5M/70MM2 x x 8057020 Electrode cable 20M/70MM2 x x Wire drive rolls (please see section 30) 73940083 KIT MWF 0.6 V white/black x x x For steel 73940054 KIT MWF 0.8 V White x x x For steel 739403 KIT MWF 0.9 U grey/blue x x x For alu 739404 KIT MWF 0.9 V grey/blue x x x For steel 73940055 KIT MWF.0 V lue x x x For steel 73940056 KIT MWF.0 U lue x x x For Alu 73940057 KIT MWF.2 V Red x x x For steel 73940058 KIT MWF.2 U Red x x x For Alu 73940059 KIT MWF.2 U Grooved red x x x For Flux Cored Wire 73940060 KIT MWF.4 U organge red x x x For Alu 7394006 KIT MWF.4 U Grooved orange/red x x x For Flux Cored Wire 73940085 KIT MWF.6 V Grooved pink/red x x x For steel 73940062 KIT MWF.6 U pink/red x x x For Alu 73940063 KIT MWF.6-U Grooved pink/red x x x For Flux Cored Wire 73940064 KIT MWF 2.0 U yellow x x x For Alu 73940065 KIT MWF 2.0 U Grooved yellow x x x For Flux Cored Wire 73940066 KIT MWF 2.4 U beige/yellow x x x For Alu 73940067 KIT MWF 2.4 U Grooved beige/yellow x x x For Flux Cored Wire Power plug 6A CEE x Mounted 32A CEE x x x Mounted 63A CEE x x x Mounted Extra features PUSH PULL KIT w/o torch x x x Mounted MIG MANAGER kit w/o torch x x x Mounted Accessories 7885028 Remote control MIG/MAG 2 potmeters x x x Require remote control plug 7885029 Remote control MIG/MAG potmeter x x x Require remote control plug 889907 Plastic adaptor for wire spool x x x 7886290 Key lock card x x x Not in combination with Multi/ Robofeeder 9:4
Inverter-based MIG/MAG with MMA SIGMA 2 300-400 -500 S A flexible solution The Sigma range consists of three power sources (300, 400 and 500 A), freely combinable with four control panels with or without pulse: Sigma 2 300 is supplied as a C or S model and primarily for diptransfer welding using solid wires in moderate wall thicknesses. Also suitable for MMA welding applications to meet the customers requirements. Sigma 2 400 is supplied as a C or S model and with the possibility of an extra wire-feed unit to avoid reconfiguration if the welder switches from one wire to another between welding operations. Sigma 2 500 is supplied as a C or S model. A heavy-duty machine accommodating wire diameters of up to.6 mm and suitable as a power source for automated applications. Technical data AREVIATIONS: Machine type Sigma 2 300 S Sigma 2 400 S Sigma 2 500 S Mains voltage +/- 5% 3 x 400 V 3 x 400 V 3 x 400 V Fuse 6 A 20 A 32 A Current range 5-300 A 5-400 A 5-500 A Duty cycle 40 C (MIG/MAG) 270 A/0% 290 A/0% 420 A/0% Duty cycle 40 C (MIG/MAG) 300 A/80% 350 A/60% 450 A/60% Duty cycle 40 C (MIG/MAG) - 400 A/40% 500 A/55% Duty cycle 20 C (MIG/MAG) 300 A/0% 330 A/0% 475 A/0% Duty cycle 20 C (MIG/MAG) - 400 A/70% 500 A/80% Dimensions H x W x L, cm ) 92.5 x 54.5 x 9 20 x 54.5 x 9 20 x 54.5 x 9 Weight, kg 58 2) 69 2) 85 3) S L = Separate wire-feed unit = Aircooled V = Watercooled ) Including trolley. 2) Does not include welding hose, cables, wire spool or any cooling liquid. 3) Includes wire feed unit and intermediary cable, but does not include welding hose, cables or wire spool. Wire feed unit MWF 4 rwf Multi MWF 50 Yard MWF 55 Yard Wire feed speed m/min. -30-30 -30-30 Wire reel diameter mm 300-200 300 Torch connection Euro Euro Euro Euro Duty cycle 40 C 420 A/0% 420 A/0% 420 A/0% 420 A/0% Duty cycle 20 C 500 A/60% 500 A/60% 500 A/60% 500 A/60% Dimensions H x W x L, cm 44 x 24,5 x 78 27 x 2 x 27 38 x 20 x54 40 x 26 x 62 Protection class IP23 IP23 IP23 IP23 Weight, kg 9 9 2 Norm EN60974-5 EN 60974-5 EN 60974-5 EN 60974-5 :
Pricelist Sigma² S Standard Package Art. no. SIGMA 2 S inverter Torch Unit price 7954488 Sigma² 300 S-L asic ML 360 3M 7954489 Sigma² 300 S-L Advanced ML 360 3M 7954490 Sigma² 300 S-L Synergic ML 360 3M 795449 Sigma² 300 S-L Pulse ML 360 3M Art. no. SIGMA 2 S inverter Torch Unit price 795448 Sigma² 400 S-V asic MV 400 FKS 3M 795449 Sigma² 400 S-V Advanced MV 400 FKS 3M 7954446 Sigma² 400 S-V Synergic MV 400 FKS 3M 7954464 Sigma² 400 S-V Pulse MV 400 FKS 3M 7954484 Sigma² 300 S-V asic MV 450 3M 7954485 Sigma² 300 S-V Advanced MV 450 3M 7954486 Sigma² 300 S-V Synergic MV 450 3M 7954487 Sigma² 300 S-V Pulse MV 450 3M 7954492 Sigma² 500 S-L asic ML 360 3M 7954493 Sigma² 500 S-L Advanced ML 360 3M 7954494 Sigma² 500 S-L Synergic ML 360 3M 7954495 Sigma² 500 S-L Pulse ML 360 3M 795446 Sigma² 400 S-L asic ML 360 3M 795447 Sigma² 400 S-L Advanced ML 360 3M 7954445 Sigma² 400 S-L Synergic ML 360 3M 7954463 Sigma² 400 S-L Pulse ML 360 3M 7954450 Sigma² 500 S-V asic MV 500 FKS 3M 795445 Sigma² 500 S-V Advanced MV 500 FKS 3M 7954452 Sigma² 500 S-V Synergic MV 500 FKS 3M 7954465 Sigma² 500 S-V Pulse MV 500 FKS 3M All standard packages include standard software package, 8.5M mains supply cable, 3M earth cable w/clamp, set of wire drive rolls, standard trolley w/bottle carrier, torch holder and handle Sigma 300S/400S includes 0.7M fixed interconnection. Sigma 500S Aircooled includes 3M interconnection w/quick connection. Sigma 500S Watercooled includes.5m interconnection w/quick connection Price examples of configurated standard machines Sigma 2 300 S-L asic Unit price Powersource 7954407 Sigma² 300 S Cooling unit Air Wire feed unit MWF4 Gasregulation No gas control kit Control box asic Software 64542 Standard package Trolley Standard trolley Remote control plug No remote control plug CANUS kit No CANUS kit Torch 8095360 ML 360 3M Interconnection Fixed Interconnection 74325970 0.7M 70MM2 Air Earth cable 80503503 3M 35MM2 Electrode cable No electrode cable Wire drive rolls 73940055 KIT MWF.0 V lue Power plug No power plug Extra features No extra features Accessories No accessories Sigma 2 300 S-L asic 7954488 asic control panel :2
Configuration possibilities and accessories Configuration possibilities and accessories Art. no. Description Unit price Configuration 7954407 Sigma 2 300 S Config. 795440 Sigma 2 400 S Config. 7954403 Sigma 2 500 S Config. Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price Sigma 2 300S Sigma 2 400S Sigma 2 500S Comments Wire feeders MWF4 x x x Double MWF4 x x x MWF4 + prepared for double MWF4 x x x MWF4 + prepared for PI or Zeta x x x MWF4 + prepared for RWF x x x MWF50 x x x MWF55 x x x Cooling unit Air x x x Water x x x Mounted Flow control Flowcontrol x x x Mounted Gasregulation IGC - Intelligent Gas Control x x x Trolley Mandatory ed for rack x x x Mounted Standard trolley x x x Mounted Trolley Autotrafo x x x Mounted Trolley for 2 feeders x x x Mounted Trolley for MWF50/55 racket x x x Trolley x x x Trolley and bracket x x x Remote control plug Remote control plug Not in combination with push-pull/ Mig-Manager. Mounted CANUS kit on powersource x x x N/A for MWF4 + prepared for double MWF4 and double MWF4 on wire feeder x x x N/A for MWF50/55 on both powersource as wire feeder x x x N/A for MWF50/55, MWF4 + prepared for double MWF4 and double MWF4 Control box asic x x x Advanced x x x Synergic x x x Pulse x x x Software 64542 Standard package x x x 645422 Standardplus package x x x 645423 Special package x x x w/powerarc Torches (please see section 23) Interconnection Fixed interconnection x x Option for Sigma 300S/400S w/ MWF4 or MWF4 prepared for PI Interconnection with plug x x x :3
Configuration possibilities and accessories Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price Sigma 2 300S Sigma 2 400S Sigma 2 500S Comments Interconnection fixed for MWF4 - Air 74325970 Interconnection 0.7M 70MM2 Air x x 7432597 Interconnection 3M 70MM2 Air x x 74325972 Interconnection 5M 70MM2 Air x x 74325973 Interconnection M 70MM2 Air x x Interconnection with plug for MWF4/50/55 - Air 74325957 Interconnection 3M 70MM2 Air x x 74325958 Interconnection 5M 70MM2 Air x x 74325959 Interconnection M 70MM2 Air x x 74325963 Interconnection 20M 70MM2 Air x x 74326946 Interconnection 3M 95MM2 Air x x x 74326947 Interconnection.5M 95MM2 Air x x x 74326948 Interconnection 5M 95MM2 Air x x x 74326949 Interconnection M 95MM2 Air x x x 74326950 Interconnection 20M 95MM2 Air x x x Interconnection fixed for MWF4 - Water 74325975 Interconnection 0.7M 70MM2 Water x x 74325976 Interconnection 3M 70MM2 Water x x 74325977 Interconnection 5M 70MM2 Water x x 74325978 Interconnection M 70MM2 Water x x Interconnection with plug for MWF4/50/55 - Water 7432595 Interconnection.5M 70MM2 Water x x 74325956 Interconnection 3M 70MM2 Water x x 74325952 Interconnection 5M 70MM2 Water x x 74325953 Interconnection M 70MM2 Water x x 74325954 Interconnection 20M 70MM2 Water x x 7432695 Interconnection.5M 95MM2 Water x x x 74326955 Interconnection 3M 95MM2 Water x x x 74326952 Interconnection 5M 95MM2 Water x x x 74326953 Interconnection M 95MM2 Water x x x 74326954 Interconnection 20M 95MM2 Water x x x Earth Cables 80503503 Earth cable 3M/35mm2 x 80503505 Earth cable 5M/35mm2 x 80505003 Earth cable 3M/50mm2 x 80505005 Earth cable 5M/50mm2 x 805050 Earth cable M/50mm2 x 8050505 Earth cable 5M/50mm2 x 80507003 Earth cable 3M/70mm2 x x 80507005 Earth cable 5M/70mm2 x x 805070 Earth cable M/70mm2 80507020 Earth cable 20M/70mm2 80509503 Earth cable 3M/95mm2 x x 80509505 Earth cable 5M/95mm2 x x 805095 Earth cable M/95mm2 x x 80509520 Earth cable 20M/95mm2 x x :4
Configuration possibilities and accessories Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price Sigma 2 300S Sigma 2 400S Sigma 2 500S Comments Electrode Cables 8053503 Electrode cable 3M/35MM2 x 8053505 Electrode cable 5M/35MM2 x 8055003 Electrode cable 3M/50MM2 x x x 8055005 Electrode cable 5M/50 MM2 x x x 80550 Electrode cable M/50MM2 x x x 8057003 Electrode cable 3M/ 70MM2 x x 8057005 Electrode cable 5M/70MM2 x x 80570 Electrode cable M/70MM2 x x 805705 Electrode cable 5M/70MM2 x x 8057020 Electrode cable 20M/70MM2 x x Wire drive rolls (please see section 30) 73940083 KIT MWF 0.6 V white/black x x x For steel 73940054 KIT MWF 0.8 V White x x x For steel 739403 KIT MWF 0.9 U grey/blue x x x For alu 739404 KIT MWF 0.9 V grey/blue x x x For steel 73940055 KIT MWF.0 V lue x x x For steel 73940056 KIT MWF.0 U lue x x x For Alu 73940057 KIT MWF.2 V Red x x x For steel 73940058 KIT MWF.2 U Red x x x For Alu 73940059 KIT MWF.2 U Grooved red x x x For Flux Cored Wire 73940060 KIT MWF.4 U organge red x x x For Alu 7394006 KIT MWF.4 U Grooved orange/red x x x For Flux Cored Wire 73940085 KIT MWF.6 V Grooved pink/red x x x For steel 73940062 KIT MWF.6 U pink/red x x x For Alu 73940063 KIT MWF.6-U Grooved pink/red x x x For Flux Cored Wire 73940064 KIT MWF 2.0 U yellow x x x For Alu 73940065 KIT MWF 2.0 U Grooved yellow x x x For Flux Cored Wire 73940066 KIT MWF 2.4 U beige/yellow x x x For Alu 73940067 KIT MWF 2.4 U Grooved beige/yellow x x x For Flux Cored Wire Power plug 6A CEE x Mounted 32A CEE x x x Mounted 63A CEE x x x Mounted Extra features PUSH PULL KIT w/o torch Mounted MIG MANAGER kit Mounted Accessories 7885028 Remote control MIG/MAG 2 potmeters x x x Require remote control plug 7885029 Remote control MIG/MAG potmeter x x x 7885602 Relief arm x x x 788667 Trolley for MWF 8///5/4 x x x 7886265 Cable coil-up set of 2 pcs. x x x 7886267 KIT MMA MWF4 SIGMA x x x 7886287 Cover for box x x x Only for MWF50/55 889907 Plastic adaptor for wire spool x x x N/A for MWF50 7886290 Key lock card x x x Not in combination with Multi/ Robofeeder :5
Examples of accessories for Sigma 2 300-400 - 500 Robot interface Art. no...78865023 Remote control unit for MMA and MIG/MAG potmeter, 8 pole Art. no...7885029 Relief arm Art. no...7885602 PC-Kit MigaMONITOR Art. no...8600 2 potmeters, 8 pole Art. no...7885028 Cable coil-up set Art. no...7886265 MIG Manager Art. no...7886256 Trolley for MWF 50-55 Yard RWF Multi MWF 50 Yard MWF 55 Yard Plast adapter for wire spool Art. no... 889907 Key lock card Art. nr...7886290 Galvaframe for MWF 50 Yard Galvaframe for MWF 50 Yard Double MWF 4 Cover for box Art. no...7886287 :6
Sigma 2 - for shipyards and other heavy industries SIGMA 2 OFFSHORE Galvanised equipment for heavy-duty environment Migatronic has developed a quite new offshore concept consisting of trolley, protective brackets, fittings etc. All in galvanised finish and specifically intended for shipyards and other heavy industries. Safety is in focus which is underlined by a number of solid functions, such as extra large trolley wheels, crane lift eyes, and fork-lift truck side members in addition to a special platform for MWF 50/55 Yard, corrosion-protected plugs, cable suspension, and a fastening device for gas cylinders or put simply: Heavy Duty altogether! Technical data machine type Sigma 2 400 S Sigma 2 500 S Mains voltage +/- 5% 3 x 400 V 3 x 400 V Fuse 20 A 32 A Current range 5-400 A 5-500 A Duty cycle, 40 C (MIG/MAG) 290 A/0% 420 A/0% Duty cycle, 40 C (MIG/MAG) 350 A/60% 450 A/60% Duty cycle, 40 C (MIG/MAG) 400 A/40% 500 A/55% Duty cycle, 20 C (MIG/MAG) 330 A/0% 475 A/0% Duty cycle, 20 C (MIG/MAG) 400 A/70% 500 A/80% Dimensions, H x W x L, cm) 20 x 54.5 x 9 20 x 54.5 x 9 Weight, kg 69 2) 85 3) ) Including trolley. 2) Does not include welding hose, cables, wire spool or any cooling liquid. 3) Includes wire feed unit and intermediary cable, but does not include welding hose, cables or wire spool Wire feed unit MWF 50 Yard MWF 55 Yard Wire feed speed, m/min. -30-30 Wire reel diameter, mm 200 300 Torch connection Euro Euro Duty cycle, 40 C 420 A/0% 420 A/0% Duty cycle, 20 C 500 A/60% 500 A/60% Dimensions H x W x L, cm 38 x 20 x54 40 x 26 x 62 Protection class IP23 IP23 Weight, kg 2 Norm EN 60974-5 EN 60974-5 :
Price list Sigma 2 400-500 Offshore Standard Package Art. no. SIGMA 2 S Offshore Torch Unit price 79545 Sigma² 400 S-V Off-shore Synergic MV 400 FKS 4M 79545 Sigma² 400 S-V Off-shore Pulse MV 500 FKS 3M 795452 Sigma² 500 S-V Off-shore Synergic MV 500 FKS 4M 795453 Sigma² 500 S-V Off-shore Pulse MV 500 FKS 3M All standard packages include standard software package, M interconnection w/pull relief, 8.5M mains supply cable, 3M earth cable w/clamp, 2.7M diffusion-slow gas hose, set of wire drive rolls, hot-dip galvanized trolley w/bottle carrier, cable coil up, fork-lift truck side members, point lifting yoke and 4 point lifting yoke. Price examples of configurated standard machines Sigma 2 400 S-V Offshore Pulse Unit price PPowersource Cooling unit Wire feed unit Gasregulation Control box Software Trolley/bracket for MWF50/55 Torch Interconnection Interconnection Earth cable Electrode cable Wire drive rolls Power plug Accessories 7954405 Sigma² 400 S Off-shore Config. incl. trolley Water incl. flow control MWF50 No gas control kit Pulse 64542 Standard package racket 80295700 MV 500 FKS 3M with plug 74326980 M 95mm2 Off-shore 4P 80509503 3M 95MM2 No electrode cable 73940057 KIT MWF.2 V Red No power plug No accessories Sigma 2 400 S-V Offshore Pulse 79545 Pulse control box Configuration possibilities and accessories Configuration possibilities and accessories Art. no. Description Unit price Configuration 7954405 Sigma 2 400 S Off-shore Config. incl. trolley 7954406 Sigma 2 500 S Off-shore Config. incl. trolley Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price Sigma² 400S off-shore Wire feeders Sigma² 500S off-shore MWF50 Yard x x MWF55 Yard x x Cooling unit Air x x Water incl. flow control x x Mounted Gasregulation IGC - Intelligent Gas Control x x Trolley/bracket for MWF50/55 racket x x Standard for MWF55/option for MWF50 Trolley x x Option for MWF50/55 Trolley and bracket x x Option for MWF50 :2
Configuration possibilities and accessories Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price Sigma 2 400S offshore Can plug Control box Sigma 2 500S offshore Can plug on power source x x Synergic x x Pulse x x Software 64542 Standard package 645422 Standardplus package 645423 Special package w/powerarc Torches (please look in section 23) x x Interconnection Interconnection with plug mandatory x x Mandatory Interconnection with plug and pull relief for MWF50/55 Air/Water 74325980 Interconnection M 70mm2 Off-shore 4P x 7432598 Interconnection 20M 70mm2 Off-shore 4P x 74325982 Interconnection 30M 70mm2 Off-shore 4P x 74326980 Interconnection M 95mm2 Off-shore 4P x x 7432698 Interconnection 20M 95mm2 Off-shore 4P x x 74326982 Interconnection 30M 95mm2 Off-shore 4P x x Earth Cables 80507003 Earth cable 3M/70mm2 x x 80507005 Earth cable 5M/70mm2 x x 80509503 Earth cable 3M/95mm2 x x 80509505 Earth cable 5M/95mm2 x x 805095 Earth cable M/95mm2 x x 80509520 Earth cable 20M/95mm2 x x Electrode Cables 8055003 Electrode cable 3M/50MM2 x x 8055005 Electrode cable 5M/50 MM2 x x 80550 Electrode cable M/50MM2 x x 8057003 Electrode cable 3M/ 70MM2 x x 8057005 Electrode cable 5M/70MM2 x x 80570 Electrode cable M/70MM2 x x 805705 Electrode cable 5M/70MM2 x x 8057020 Electrode cable 20M/70MM2 x x Wire drive rolls 73940083 KIT MWF 0.6 V White/black x x For steel 73940054 KIT MWF 0.8 V White x x For steel 739403 KIT MWF 0.9 U Grey/blue x x For alu 739404 KIT MWF 0.9 V Grey/blue x x For steel 73940055 KIT MWF.0 V lue x x For steel 73940056 KIT MWF.0 U lue x x For Alu 73940057 KIT MWF.2 V Red x x For steel 73940058 KIT MWF.2 U Red x x For Alu 73940059 KIT MWF.2 U Grooved Red x x For Flux Cored Wire 73940060 KIT MWF.4 U Orange/red x x For Alu 7394006 KIT MWF.4 U Grooved Orange/red x x For Flux Cored Wire 73940085 KIT MWF.6 V Grooved Pink/red x x For steel 73940062 KIT MWF.6 U Pink/red x x For Alu 73940063 KIT MWF.6-U Grooved Pink/red x x For Flux Cored Wire 73940064 KIT MWF 2.0 U Yellow x x For Alu 73940065 KIT MWF 2.0 U Grooved Yellow x x For Flux Cored Wire 73940066 KIT MWF 2.4 U eige/yellow x x For Alu 73940067 KIT MWF 2.4 U Grooved eige/yellow x x For Flux Cored Wire Power plug 32A CEE x x 63A CEE x x :3
Examples of accessories for Sigma 2 400-500 Offshore Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price Sigma 2 400S offshore Sigma 2 500S offshore Accessories 7886265 Cable coil-up set of 2 pcs. x x 7886287 Cover for box x x 889907 Plastic adaptor for wire spool x x Only for MWF55 Cable coil-up set Art. no...7886265 Cover for box Art. no...7886287 Plast adapter for wire spool Art. no... 889907 MWF 50 Yard MWF 55 Yard Galvaframe for MWF 50 Yard Galvaframe for MWF 50 Yard Trolley for MWF 50-55 Yard :4
Inverter-based MIG/MAG with pulse FLEX 3000 Flex 3000 C is used by an increasing number of Europe s leading auto manufacturers for sheet-metal welding of both aluminium and high-tensile steel, and MIG brazing of galvanised steel. Flex 3000 is programmed using the integrated MigaCARD which holds both program data and machine software. This makes it possible to reprogram the machine for different setups in new materials, wires and gases. Flex 3000 DUO has outlets for two MIG torches and two possibilities of wire-feeding but still only one control panel. Flex 3000 DUO makes it both faster and easier to switch between processes e.g. MIG brazing and welding. LICENSED Y: AREVIATIONS: C = Compact L = Aircooled V = Watercooled Technical data Machine type Flex 3000 C Flex 3000 DUO Mains voltage +/- 5% 3 x 400 V 3 x 400 V Fuse 6 A 6 A Current range DC 5-300 A 5-300 A Duty cycle 40 C 220 A/0% 220 A/0% Duty cycle 40 C 250 A/60% 250 A/60% Duty cycle 40 C 300 A/25% 300 A/25% Duty cycle 20 C 250 A/0% 250 A/0% Duty cycle 20 C 300 A/60% 300 A/60% Dimensions H x W x L, cm 69 x 27 x 63 69 x 27 x 88 Weight, kg 30 5 COOLING UNIT mcu 250 Supply voltage 400 V +/- 5 % Max. open circuit consumption 5 W Cooling efficiency 250 W Tank volume 4 l Flow at.2 bar/60 C.75 l/min. Pressure max. 2.5-3.0 bar Norm EN/IEC60974-2 Dimensions H x W x L, cm 70 x 30 x 22 cm Weight (excl. cooling liquid) 6 kg Standard package Art, no, Description Torch Unit price 79543 FLEX 3000 C-L ML 240 3M 79543 FLEX 3000 C-L w/mig MANAGER MANAGER ML 240 3M 795437 FLEX 3000 C-L version GM 795432 FLEX 3000 C-V MV 240 3M ML 250F 4M version GM 795433 FLEX 3000 C-V MANAGER MV 240 3M 7954330 FLEX 3000 Duo L 2 x ML 240 3M 795433 FLEX 3000 Duo V 2 x MV 240 F 3M All Flex 3000 C standard pacakges include 8.5M mains supply cable, 3M earth cable w/clamp, set of rollers, standard Migacard non-editable, trolley w/tool tray and cable coil-up. Flex art.no. 78857026 (except art.no. 79543 which is w/o trolley), torch holder (except art.no. 79543) All Flex 3000 Duo standard pacakges include 8.5M mains supply cable, 3M earth cable w/clamp, 2 set of rollers, standard Migacard non-editable, trolley for 2 cylinders art.no. 78858023 torch holder and tool tray. See price examples of configurated Flex machines overleaf. 2:
Price list Flex 3000 Price examples of configurated standard machines FLEX 3000 C - AIR Unit price Powersource 7954300 Flex 3000 Cooling unit Air Gasregulation Standard on/off Trolley No trolley Torch 8095240 ML 240 3M Earth cable 80503503 3M 35MM2 Wire drive rolls 73940055 KIT MWF.0 V lue Migacard Standard protected Power plug No power plug Extra features No extra features Accessories No accessories FLEX 3000 C - AIR 79543 FLEX 3000 DUO VATER Unit price Powersource 7954305 Flex 3000 Duo Cooling unit Water Trolley 78858023 Trolley for 2 bottles Torch 80294242 MV 240 F 3M Alu Torch 80294240 MV 240 F 3M Earth cable 80503503 Earth cable 3M/35mm2 Wire drive rolls 73940055 KIT MWF.0 V lue Wire drive rolls 73940056 KIT MWF.0 U lue Migacard Standard protected Power plug No power plug Extra features No extra features Accessories No accessories FLEX 3000 DUO WATER 795433 Configuration possibilities and accessories Configuration possibilities and accessories Art. no. Description Unit price Configuration 7954300 Flex 3000 Config. 7954305 Flex 3000 Duo Config. Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price Flex 3000 Flex 3000 DUO Cooling unit Air x x Water x x Gasregulation Standard on/off x Mounted Adjustable x Mounted Trolleys 78857024 Trolley MMA x 78857025 Trolley MIG/TIG x 78857026 Trolley Flex x 78858022 Trolley Autotransformer 2 bottles x x 78858023 Trolley for 2 bottles x x 78858026 Trolley Autotransformer x Only for air 2:2
Configuration possibilities and accessories Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price Flex 3000 Flex 3000 DUO Torches (please see section 23) Earth Cables 80503503 Earth cable 3M/35 mm 2 x x 80503505 Earth cable 5M/35 mm 2 x x 805035 Earth cable M/35 mm 2 x x 8050355 Earth cable 5M/35 mm 2 x x 80505003 Earth cable 3M/50 mm 2 x x 80505005 Earth cable 5M/50 mm 2 x x 805050 Earth cable M/50 mm 2 x x 8050505 Earth cable 5M/50 mm 2 x x Wire drive rolls (please see section 30) 73940083 KIT MWF 0.6 V White/black x x For steel 73940054 KIT MWF 0.8 V White x x For steel 739403 KIT MWF 0.9 U Grey/blue x x For Alu 739404 KIT MWF 0.9 V Grey/blue x x For steel 73940055 KIT MWF.0 V lue x x For steel 73940056 KIT MWF.0 U lue x x For Alu 73940057 KIT MWF.2 V Red x x For steel 73940058 KIT MWF.2 U Red x x For Alu 73940059 KIT MWF.2 U Grooved red x x For Flux Cored Wire 73940060 KIT MWF.4 U Orange red x x For Alu 7394006 KIT MWF.4 U Grooved orange/red x x For Flux Cored Wire 73940085 KIT MWF.6 V Grooved pink/red x x For steel 73940062 KIT MWF.6 U Pink/red x x For Alu 73940063 KIT MWF.6-U Grooved pink/red x x For Flux Cored Wire 73940064 KIT MWF 2.0 U Yellow x x For Alu 73940065 KIT MWF 2.0 U Grooved yellow x x For Flux Cored Wire 73940066 KIT MWF 2.4 U eige/yellow x x For Alu 73940067 KIT MWF 2.4 U Grooved beige/yellow x x For Flux Cored Wire Power plug 6A CEE x x Mounted 32A CEE x x Mounted 63A CEE x x Mounted Extra features MIG MANAGER KIT w/o torch x x Mounted PUSH PULL KIT w/o torch x Mounted Accessories 45050333 Adapter for wire roll x x Examples of accessories for Flex 3000 Adapter for wire roll Art. no...45050333 Welding torch holder Art. no...788664 2:3
Portable TIG/MMA inverters DELTA Migatronic Delta is a range of three mono-phase, portable inverters: two MMA machines and one TIG machine with pulse. The machines are in the new rounded and compact Migatronic design with simple control panels that are suitable for professional workshop use, on-site tack-welding operations, fast call-out response with the service van as well as assembly and repairs. Technical data Machine type delta 40 E DELTA 60 E DELTA 60 HP Mains voltage x 230 V x 230 V x 230 V Fuse 5 A 20 A 6 A Duty cycle DC 0% at 40 C 85 A 0 A A Duty cycle DC 60% at 40 C 90 A 20 A 30 A Duty cycle DC 5% at 40 C 30 A 60 A 60 A Duty cycle DC 0% at 20 C 0 A 20 A 5 A Duty cycle DC 60% at 20 C A 50 A 35 A Duty cycle DC 20% at 20 C 40 A 60 A 60 A Open circuit voltage 55-60 V 55-60 V 60-65 V Current range - 40 A 20-60 A - 60 A Dimensions H x W x L, mm 220 x 50 x 370 220 x 50 x 370 255 x 80 x 400 Weight, kg 6.6 6.6 9.5 Standard Package Art. no. Description Torch Unit price 7933705 Delta 40E 7933707 Delta 60E 7953 Delta 60HP w/o plug TIG Ergo 20 4M 7953 Delta 60HP w/plug TIG Ergo 20 4M All Delta 40E/60E standard packages include 2m earth cable and 3m electrode cable Delta 60HP standard package include 3m earth cable w/clamp Price examples of configurated standard machines Delta 60HP w/plug Unit price Powersource 795300 Delta 60HP Torch 80392795 TIG Ergo 20 4M Wear parts for torch 803008 Standard wear parts set Earth cable 80502503 Earth cable 3M/25mm2 Electrode cable No electrode cable Mains supply cable w/plug Accessories No accessories Delta 60HP w/plug 7953 4:
Configuration possibilities and accessories Configuration possibilities and accessories Art. no. Description Unit price Configuration 795300 Delta 60HP Config. Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price Delta 40/60 Delta 60HP Torches (please see section 24) Wear parts kit for torches 803007 Std. wearingpart set TIG x 803008 Std. wearingpart set TIG 20-40 x 8030040 Wearingpart set.6 gas TIG -30 x 803004 Wearingpart set 2.4 gas TIG -30 x 8030042 Wearingpart set.6 gas TIG 20-40 x 8030043 Wearingpart set 2.4 gas TIG 20-40 x 80228 Wear parts box TIG -30 x 80230 Wear parts box TIG 20-40 x Earth cables 80502503 Earth cable 3M/25mm2 x 80502505 Earth cable 5M/25mm2 x 805025 Earth cable M/25mm2 x 8050255 Earth cable 5M/25mm2 x 80503503 Earth cable 3M/35mm2 x 80503505 Earth cable 5M/35mm2 x 805035 Earth cable M/35mm2 x 8050355 Earth cable 5M/35mm2 x Electrode Cables 8052503 Electrode cable 3M/25MM2 x 8052505 Electrode cable 5M/25 MM2 x 80525 Electrode cable M/25MM2 x 805255 Electrode cable 5M/25MM2 x 8053503 Electrode cable 3M/35MM2 x 8053505 Electrode cable 5M/35MM2 x 80535 Electrode cable M/35MM2 x Mains supply cable for Delta HP w/o plug x w/plug x Accessories 80234 Carrying bag for Delta x x 788506 Footpedal PG-, 7-Pole w/5m cable air x 8039005 Torch TIG V 4M L x oth parts have to be used 820040 Adaptordinse large-small compl. x Examples of accessories for Delta Footpedal Art. no...788506 TIG torch V, 4 m L Art. no...8039005 Carrying ag Art. no...80234 4:2
Inverter-based TIG/MMA and MMA PI 200-250 Migatronic s Pi welding inverters are user-friendly and advanced welding machines, which meet virtually every requirement for TIG and MMA welding under all possible conditions. The Migatronic Pi range consists of mono- and three-phase high performance inverters for precision welding in stainless steel, aluminium and other high alloy materials. They are equally well suited to manufacturing, repair and assembly jobs ranging from TIG HP (high frequency with pulse) and TIG AC/DC to MMA tasks. Pi 200 is the designation for two mono-phase welding machines: the TIG DC HP and TIG AC/DC, together with a three-phase MMA machine. The Pi 250 machines are all threephase. They can also be freely combined with all three control panels: the TIG DC HP, TIG AC/DC and MMA. Control panels Pi MMA Pi DC HP with Synergy PLUS TM Pi AC/DC with D.O.C. Technical data Machine type PI 200 E DC PI 200 HP DC PI 200 AC/DC PI 250 E/HP DC PI 250 AC/DC Mains voltage +/- 5% 3 x 400 V x 230 V x 230 V 3 x 400 V 3 x 400 V Fuse A 25 A 25 A A A Current range 5-200 A 5-200 A 5-200 A 5-250 A 5-250 A Duty cycle 40 C TIG - 50 A/0% 40 A/0% 50 A/0% 50 A/0% Duty cycle 40 C MMA 40 A/0% 30 A/0% 30 A/0% 50 A/0% 50 A/0% Duty cycle 40 C TIG - 70 A/60% 70 A/60% 90 A/60% 80 A/60% Duty cycle 40 C MMA 80 A/60% 50 A/60% 50 A/60% 90 A/60% 70 A/60% Duty cycle 20 C TIG - 70 A/0% 60 A/0% 70 A/0% 70 A/0% Duty cycle 20 C MMA 70 A/0% 50 A/0% 50 A/0% 70 A/0% 70 A/0% Duty cycle 20 C TIG - 200 A/40% 200 A/40% 2 A/60% 200 A/60% Duty cycle 20 C MMA 200 A/60% 70 A/40% 70 A/40% 2 A/60% 200 A/60% Dimensions H x W x L, cm 36 x 22 x 57 36 x 22 x 57 36 x 22 x 57 36 x 22 x 57 36 x 22 x 57 Weight, kg 20 9 9 20 20 5:
Price list PI 200-250 Standard Package Art. no. Description Torch Unit price 79572 PI 200 MMA 79567 PI 250 MMA 79556 PI 200 DC HP PFC TIG Ergo 20 4M 79557 PI 250 DC HP-Water PFC TIG Ergo 30 4M 79554 PI 250 DC HP TIG Ergo 20HD 4M 79555 PI 250 DC HP-Water TIG Ergo 30 4M 79558 PI 250 DC HP-Water w/trolley TIG Ergo 30 4M 795257 PI 200 AC/DC PFC TIG Ergo 20 4M 795258 PI 200 AC/DC-Water PFC TIG Ergo 30 4M 795254 PI 250 AC/DC TIG Ergo 20HD 4M 795255 PI 250 AC/DC-Water TIG Ergo 30 4M 795259 PI 250 AC/DC-Water w/trolley TIG Ergo 30 4M Standard packages PI 200/250 MMA include 3M mains supply cable, 3M earth cable w/ clamp and 3M electrode cable w/holder Standard packages PI 200 DC and AC/DC include PFC (power factor correction), 3M mains supply cable w/connection plug and 3M eartch cable w/clamp Standard packages PI 250 DC and AC/DC include 3M mains supply cable and 3M earth cable w/clamp See price examples of configurated Pi machines below Price examples of configurated standard machines PI 250 MMA Unit price Powersource 79560 PI 250 Type of machine MMA Cooling unit Air Remote control plug No remote control plug Trolley No trolley Earth cable 80502503 Earth cable 3M/25mm2 Electrode cable 8052503 Electrode cable 3M/25mm2 Power plug No power plug Accessories No accessories PI 250 MMA 79567 PI MMA control panel PI 200 AC/DC PFC Unit price Powersource 79565 PI 200 Type of machine AC/DC w/pfc Cooling unit Air Remote control plug No remote control plug Trolley No trolley Torch 80392795 TIG Ergo 20 4M Wear parts for torch 803008 Standard wear parts set Earth cable 80502503 Earth cable 3M/25mm2 Electrode cable No electrode cable Mains supply cable w/schuko plug Accessories No accessories PI 200 AC/DC PFC 795257 AC/DC control panel 5:2
Configuration possibilities and accessories Configuration possibilities and accessories Art. no. Description Unit price Configuration 79565 PI 200 Config. 79560 PI 250 Config. Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price PI 200 PI 250 Type of Machine MMA (PI 200) x MMA (PI 250) x DC (PI 200) x w/pfc (power factor correction) DC (PI 250) x AC/DC (PI 200) x w/pfc (power factor correction) AC/DC (PI250) x Cooling unit Water (PI 200) x Water (PI 250) x Flow control Flowcontrol x x Remote control plug Remote control plug 8-pole x x Mounted. Option for DC and AC/DC Trolleys 7885704 PI trolley air x x 78857040 PI trolley water x x Torches (please see section 24) Wear parts kit for torches 803008 Std. wearingpart set TIG 20-40 x x 803009 Std. Wearingpart set TIG 30 x x 8030040 Wearingpart set.6 gas TIG -30 x x 803004 Wearingpart set 2.4 gas TIG -30 x x 8030042 Wearingpart set.6 gas TIG 20-40 x x 8030043 Wearingpart set 2.4 gas TIG 20-40 x x 80228 Wear parts box TIG -30 x x 80230 Wear parts box TIG 20-40 x x Earth Cables 80502503 Earth cable 3M/25mm2 x x 80502505 Earth cable 5M/25mm2 x x 805025 Earth cable M/25mm2 x x 8050255 Earth cable 5M/25mm2 x x 80503503 Earth cable 3M/35mm2 x x 80503505 Earth cable 5M/35mm2 x x 805035 Earth cable M/35mm2 x x 8050355 Earth cable 5M/35mm2 x x Electrode Cables 8052503 Electrode cable 3M/25MM2 x x 8052505 Electrode cable 5M/25 MM2 x x 80525 Electrode cable M/25MM2 x x 805255 Electrode cable 5M/25MM2 x x 8053503 Electrode cable 3M/35MM2 x x 8053505 Electrode cable 5M/35MM2 x x 80535 Electrode cable M/35MM2 x x Mains supply cable (PI 200 DC-AC/DC) w/o Schuko plug x w/schuko plug x Power plug 6A CEE Only MMA x Mounted 32A CEE Only MMA x Mounted 63A CEE Only MMA x Mounted 5:3
Configuration possibilities and accessories Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price PI 200 PI 250 Accessories 7447287 Wire harness remote control PI 200/250 x x Option for PI 200/250 MMA MMA 788505 Footpedal PG-, 7-Pole w/5m cable water x x For watercooled machine 788506 *Footpedal PG-, 7-Pole w/5m cable air x x For aircooled machine 7885035 *Remote control -pot 7-Pole w/5m cable x x 7885036 *Remote control -pot 7-Pole w/m cable x x 766343 **Remote control FSJ x x 766380 **Remote control FP x x Require remote control plug. Not 76638 **Remote control FS x x available for PI 200/250 MMA. 766382 **Remote control FSL x x 78850 ***Footpedal FTF x x 74340003 Remote control cable 5M 8-pole x x 7434000 Remote control cable M 8-pole x x 74340002 Remote control cable 20M 8-pole x x 74342005 Remote control cable 5M 6/7Pole Air x x For footpedal FTF- Air 74342006 Remote control cable M 6/7Pole Air x x For footpedal FTF- Air 743420 Remote control cable 5M 6/7Pole Water x x For footpedal FTF- Water 743420 Remote control cable M 6/7Pole Water x x For footpedal FTF- Water * Wire harness remote control PI 200/250 MMA article no. 7447287 is mandatory for all MMA machines ** require 8-pole remote control cables *** require both 8-pole and 6/7-pole remote control cables Examples of accessories for PI 200-250 Footpedal 7-pole watercooled Art. no...78505 Footpedal FTF Art. no...78850 Remote control Art. no...7885035 Remote control FSL Art. no...766382 7-pole aircooled Art. no...78506 Wear parts box TIG -30 Art. no...80228 Wear parts box TIG 20-40 Art. no...80230 Trolley air Art. no...7885704 5:4
Inverter-based TIG/MMA and MMA PI 320-400 - 500 Pi 320/400/500 are for quality welding operations in TIG DC HP and TIG AC/DC. You have never seen such a variety of readily accessible facilities for TIG welding: increased programming, simple operation and user-friendly design, as well as inverter technology combined with innovative operation and communication possibilities. Pi 320, 400 and 500 three-phase pure TIG industrial machines. Ideal for both manual welding and automated welding in TIG DC HP and TIG AC/DC versions. All models include an integral watercooling unit. Control panels Pi DC HP with Synergy PLUS TM Pi AC/DC with D.O.C. Technical data Machine type PI 320 HP DC-AC/DC PI 400 HP DC-AC/DC PI 500 HP DC-AC/DC Mains voltage +/- 5% 3 x 400 V 3 x 400 V 3 x 400 V Fuse 6 A 25 A 32 A Current range 5-320 A 5-400 A 5-500 A Duty cycle 40 C TIG 265 A/0% 290 A/0% 420 A/0% Duty cycle 40 C MMA 235 A/0% 290 A/0% 420 A/0% Duty cycle 40 C TIG 290 A/60% 350 A/60% 500 A/60% Duty cycle 40 C MMA 270 A/60% 350 A/60% 450 A/60% Duty cycle 20 C TIG 305 A/0% 330 A/0% 475 A/0% Duty cycle 20 C MMA 280 A/0% 330 A/0% 475 A/0% Max. Duty cycle 20 C TIG 320 A/95% 400 A/70% 500 A/80% Max. Duty cycle 20 C MMA 320 A/60% 400 A/50% 400 A/65% Dimensions H x W x L, cm 98 x 54.5 x 9 98 x 54.5 x 9 98 x 54.5 x 9 Weight, kg (PFC) 62 (7) 63 (72) 68 (77) 5:5
Price list PI 320-400 - 500 Standard Package Art. no. Description Torch Unit price 7954630 PI 320 DC HP-Water TIG Ergo 40 4M 79546 PI 400 DC HP-Water TIG Ergo 40 4M 7954620 PI 500 DC HP-Water TIG Ergo 40 4M 7954635 PI 320 AC/DC Water TIG Ergo 40 4M 79546 PI 400 AC/DC Water TIG Ergo 40 4M 795462 PI 500 AC/DC Water TIG Ergo 40 4M All standard packages include 8.5M mains supply cable, 3M earth cable w/clamp, standard trolley and torch holder See price examples of configurated Pi machines below Price examples of configurated standard machines PI 320 DC HP WATER Unit price Powersource 7954602 PI 320 Type of machine DC Watercooled Flow control No flow control Gas regulation Standard on/off Remote control plug No remote control plug Trolley Standard Torch 8049225 TIG Ergo 40 4M Wear parts for torch 803008 Standard wear parts set Earth cable 80505003 Earth cable 3M/50mm2 Electrode cable No electrode cable Power plug No power plug Accessories No accessories PI 320 DC HP water 7954630 Pi DC HP control panel PI 400 AC/DC WATER Unit price Powersource 7954600 PI 400 Type of machine AC/DC Watercooled Flow control No flow control Gas regulation Standard on/off Remote control plug No remote control plug Trolley Standard Torch 8049225 TIG Ergo 40 4M Wear parts for torch 803008 Standard wear parts set Earth cable 80507003 Earth cable 3M/70mm2 Electrode cable No electrode cable Power plug No power plug Accessories No accessories PI 400 AC/DC water 79546 AC/DC control panel 5:6
Configuration possibilities and accessories Configuration possibilities and accessories Art. no. Description Unit price Configuration 7954602 PI 320 Config. 7954600 PI 400 Config. 795460 PI 500 Config. Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price PI 320 PI 400 PI 500 Type of Machine DC watercooled x x x AC/DC watercooled (PI 320) x AC/DC watercooled (PI 400) x AC/DC watercooled (PI 500) x Flow control Flowcontrol x x x Mounted Gas regulation Standard on/off x x x Mounted Adjustable x x x Mounted Remote control plug Remote control plug x x Mounted Trolley Mandatory ed for rack x x x Mounted Standard trolley x x x Mounted Trolley Autotransformer x x x Mounted Torches (please see section 24) Wear parts kit for torches 803008 Std. wearingpart set TIG 20-40 x x x 803009 Std. Wearingpart set TIG 30 x x x 8030040 Wearingpart set.6 gas TIG -30 x x x 803004 Wearingpart set 2.4 gas TIG -30 x x x 8030042 Wearingpart set.6 gas TIG 20-40 x x x 8030043 Wearingpart set 2.4 gas TIG 20-40 x x x 80228 Wear parts box TIG -30 x x x 80230 Wear parts box TIG 20-40 x x x Earth Cables 80505003 Earth cable 3M/50mm2 x 80505005 Earth cable 5M/50mm2 x 805050 Earth cable M/50mm2 x 8050505 Earth cable 5M/50mm2 x 80507003 Earth cable 3M/70mm2 x x 80507005 Earth cable 5M/70mm2 x x 805070 Earth cable M/70mm2 x x 80507020 Earth cable 20M/70mm2 x x 80509503 Earth cable 3M/95mm2 x x 80509505 Earth cable 5M/95mm2 x x 805095 Earth cable M/95mm2 x x 80509520 Earth cable 20M/95mm2 x x Electrode Cables 8055003 Electrode cable 3M/50MM2 x x 8055005 Electrode cable 5M/50 MM2 x x 80550 Electrode cable M/50MM2 x x 8057003 Electrode cable 3M/ 70MM2 x x x 8057005 Electrode cable 5M/70MM2 x x x 80570 Electrode cable M/70MM2 x x x 805705 Electrode cable 5M/70MM2 x x x 8057020 Electrode cable 20M/70MM2 x x x 5:7
Configuration possibilities and accessories Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price PI 320 PI 400 PI 500 Power plug Accessories 6A CEE x x x Mounted 32A CEE x x x Mounted 63A CEE x x x Mounted 788505 Footpedal PG-, 7-Pole 5M Water x x x 766343 Remote control FSJ x x x 766380 Remote control FP x x x 76638 Remote control FS x x x 766382 Remote control FSL x x x 78850 *Footpedal FTF x x x 74340003 Remote control cable 5M 8-pole x x x 7434000 Remote control cable M 8-pole x x x 74340002 Remote control cable 20M 8-pole x x x 743420 Remote control cable 5M 6/7Pole Water x x For footpedal FTF- Water 743420 Remote control cable M 6/7Pole Water x x For footpedal FTF- Water * Require both 8-pole and 6/7-pole remote control cables Require remote control plug Examples of accessories for PI 320-400 - 500 Footpedal 7-pole watercooled Art. no...78505 Remote control FSL Art. no...766382 Remote control FP Art. no...766380 Wear parts box TIG -30 Art. no...80228 Wear parts box TIG 20-40 Art. no...80230 5:8
CWF - cold wire feeder TIG and TIG Plasma with continuous wire-feeding fewer interruptions of operations and economical use Migatronic s CWF Multi (Cold Wire Feeder) is a separate wire feed unit especially for TIG and plasma TIG welding with Pi 320, 400 and Pi 500, Migatronic s high-performance industrial machines that cover every need for precision welding in steel, stainless steel, aluminium and other high-alloy materials. CWF Multi features automatic wire-feeding through a liner from 5 kilogram reels and is typically used for mechanised setups with communication via interface (CAN US) with robots or automated devices, or for optimation of manual TIG welding. Optimised production and less waste If used with the right filler material and wire-feed speed, the CWF Multi optimises the production flow. Use of wire from reels instead of traditional TIG filler wire is economical in itself because waste and interruptions of operations are reduced to a minimum. Handle/Slide for CWF Art. no...788632 Configuration possibilities and accessories Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price PI 320 PI 400 PI 500 Wire feeders CWF (cold wire feeder) x x x Require can plug CANUS kit Mandatory On power source x x x Wire guide holder 80300254 Wire guide holder small x x x 80300255 Wire guide holder big x x x Wire drive rolls (please see section 30) 73940083 KIT MWF 0.6 V White/black x x x For steel 73940054 KIT MWF 0.8 V White x x x For steel 739403 KIT MWF 0.9 U Grey/blue x x x For alu 739404 KIT MWF 0.9 V Grey/blue x x x For steel 73940055 KIT MWF.0 V lue x x x For steel 73940056 KIT MWF.0 U lue x x x For Alu 73940057 KIT MWF.2 V Red x x x For steel 73940058 KIT MWF.2 U Red x x x For Alu 73940059 KIT MWF.2 U Grooved red x x x For Flux Cored Wire 73940060 KIT MWF.4 U Orange red x x x For Alu 7394006 KIT MWF.4 U Grooved orange/red x x x For Flux Cored Wire 73940085 KIT MWF.6 V Grooved pink/red x x x For steel 73940062 KIT MWF.6 U Pink/red x x x For Alu 73940063 KIT MWF.6-U Grooved pink/red x x x For Flux Cored Wire 73940064 KIT MWF 2.0 U Yellow x x x For Alu 73940065 KIT MWF 2.0 U Grooved yellow x x x For Flux Cored Wire 73940066 KIT MWF 2.4 U eige/yellow x x x For Alu 73940067 KIT MWF 2.4 U Grooved beige/yellow x x x For Flux Cored Wire Accessories 788632 Handle/Slide for CWF x x x 788632 Trolley x x x 6:
Plasma cutters ZETA 40-60 The Migatronic Zeta plasma cutters featuring operational comfort, automatic pilot-arc control, and adjustable gas flow are suitable for both workshop use and on-site repairs. Zeta uses compressed air as the plasma gas, thereby enabling it to be connected to existing compressors. The two Zetas have stable ignition of the pilot arc and produce precision cuts in all conductive metals. The machines are prepared for use with generators and come with various sizes of nozzles for highquality cuts. Zeta 40 (weighing 9 kilograms) is mono-phase and produces quality cuts in plate thicknesses up to 8 mm. Zeta 40 has PFC (Power Factor Correction) function for full output by means of 6 A mains fuses. Zeta 60 is three-phased and produces quality cuts in materials up to 2 mm. Technical data Machine type ZETA 40 ZETA 60 Mains voltage x 230 V 3 x 400 V Fuse (PFC) (6 A) 6 A Current range 20-45 A 20-60 A Duty cycle 40 C 40% 45 A 60 A Duty cycle 40 C 0% 35 A 40 A Open circuit voltage 225 V 240 V Air pressure 4-6 bar 4-6 bar Consumption l/min. 0-60 0-60 Cut, quality, mm < 8 < 2 Cut, max., mm < 2 < 8 Dimensions L x W x H, mm 205 x 345 x 475 205 x 345 x 475 Weight, kg 9 20 Standard Package Art. no. Description Torch Unit price 79624 ZETA 40 6M Plasma hose 796242 ZETA 60 6M Plasma hose All standard packages include 3M mains supply cable, 6M Plasma hose and 3M earth cable w/clamp Machine torch (Automation) We do not stock this model but shall be pleased to supply it to order: Please state which type of machine the torch is intended for. Accessories Configuration possibilities and accessories Compatibility Art. no. Description Unit price Zeta 40/60 Wear parts (please look overleaf) Accessories 80600200 Circle cutting device compl. x Plasma torch, 6 m Art. no...8069009 Circle cutting device compl. Art. no...80600200 7:
Wear Parts for Plasma torch Position no. Item no. Description No of pcs. Unit price 80650007 Torch body 2 806009 Electrode 2a 8060 Electrode, long 3 806409 Insulating ring 4 80630024 Cutting nozzle, short ø0.9 4 80630023 Cutting nozzle, short ø.0 4 80630022 Cutting nozzle, short ø. 4 8063002 Cutting nozzle, short ø.2 4a 80630025 Cutting nozzle, long ø0.9 4a 80630026 Cutting nozzle, long ø.0 4a 80630027 Cutting nozzle, long ø. 4a 80630028 Cutting nozzle, long ø.2 5 806402 Protection cap 6 806009 Distance spring 806006 Diffuser 806005 O-ring 2 806008 Distance ring (2 legs) 22 806009 Distance ring ø2mm 23 8060020 Distance ring ø2mm (4 legs) 7:2
Welding generators MEW Migatronic s range of mobile welding generators for outdoor use, powered by petrol or diesel, cover a wide range of use within MMA welding and power supply for tools. All machines meet the latest noise level requirements and eco standards, and the selection of globally used types of quality motors enables world-wide after-sales service. Technical data Standard Package Art. no. Description Unit price 79902928 MEW Chopper 50 79902924 MEW 2000 G 7990296 MEW 3000 D 7990295 MEW 4000 D The standard packages above are excl. cables Machine type mew CHOPPER 50 MEW 2000 G MEW 3000 D MEW 4000 D Cubic capacity 90 cc 377 cc 954 cc 250 cc Cooling system Air cooled Air cooled Air cooled Air cooled Start system Recoil Recoil Electric Electric Duty cycle 0% - 40 A 250 A 3 00 A Duty cycle 60% 50 A 70 A 300 A 350 A Duty cycle 35% - - 300 A 400 A Current range 30-50 A 20-70 A 30-300 A 30-400 A Open circuit voltage 65 V 65 V 75 V 70 V Dimensions, LXWXH 420 x 360 x 480 870 x 520 x 592 220 x 660 x 750 4 x 840 x 850 Weight kg 34 30 445 465 Configuration possibilities and accessories Compatibility Comments Art. no. Description Unit price MEW 2000 MEW 3000 MEW 4000 Earth cables 80502503 Earth cable 3M/25mm2 x 80502505 Earth cable 5M/25mm2 x 805025 Earth cable M/25mm2 x 80503503 Earth cable 3M/35mm2 x 80503505 Earth cable 5M/35mm2 x 805035 Earth cable M/35mm2 x 80505003 Earth cable 3M/50mm2 x 80505005 Earth cable 5M/50mm2 x 805050 Earth cable M/50mm2 x Power plug 8052503 Electrode cable 3M/25MM2 x 8052505 Electrode cable 5M/25 MM2 x 80525 Electrode cable M/25MM2 x 8053503 Electrode cable 3M/35MM2 x 8053505 Electrode cable 5M/35MM2 x 80535 Electrode cable M/35MM2 x 8055003 Electrode cable 3M/50MM2 x 8055005 Electrode cable 5M/50 MM2 x 80550 Electrode cable M/50MM2 x Accessories 8203248 Wheel set for MEW 2000 G x 8:
Plasma Welding PI Plasma Pi 400 Plasma, a three-phase, water-cooled welding inverter dedicated to plasma welding in the current range 5-400 A, is the obvious power source in any imaginable automatic setup. Pi 400 Plasma masters everything from sheet metals up to 8 mm mild steel and mm stainless steel. The machine has three optional pulse functions: traditional pulse, quick pulse, Synergy PLUS TM pulse or without pulse - using three different plasma processes: plasma-melt, plasma-press and plasma-keyhole welding. Also suitable for TIG welding. Technical data Machine type PI 400 PLAMA Mains voltage +/- 5% 3 x 400 V Fuse 25 A Eff. mains current 7.3 A Output, 0% 2.0 kva Max. output 9.3 kva Open circuit power 40 W Current range 5-400 A Open circuit voltage 95 V Application class S Protection class IP 23 Norm EN60974-, 2, 3, Dimensions H x W x L, cm 98 x 54.5 x 9 Weight, kg 67 Standard Package Art. no. Description Unit price 7954625 PI 400 Plasma Water w/trolley excl. torch 7954626 PI 400 Plasma Water w/o trolley excl. torch All standard packages include 8.5M mains supply cable, flow control, diffusion-slow gas hose, remote control plug, CANUS plug, adjustable gas regulation (shield- and plasma gas) and torch holder. Synchronised pulsating wire; Pi 400 Plasma can support up to eight CWF Multi units Configuration possibilities and accessories Art. no. Description Unit price Plasma torches 806000 PLASMA-TIG AIPLAS 0W 4M 8069506 PWM-300 6M COMPLETE 806950 PWM-4A 6M COMPLETE Earth Cables 80507003 Earth cable 3M/70mm2 80507005 Earth cable 5M/70mm2 805070 Earth cable M/70mm2 80507020 Earth cable 20M/70mm2 80509503 Earth cable 3M/95mm2 80509505 Earth cable 5M/95mm2 805095 Earth cable M/95mm2 80509520 Earth cable 20M/95mm2 Comments 9:
Configuration possibilities and accessories Configuration possibilities and accessories Comments Art. no. Description Unit price Accessories 788505 Footpedal PG-, 7-Pole 5M Water 766343 Remote control FSJ 766380 Remote control FP 76638 Remote control FS 766382 Remote control FSL 78850 Footpedal FTF Require both 8-pole and 6/7-pole remote control cables 74340003 Remote control cable 5M 8-pole 7434000 Remote control cable M 8-pole 74340002 Remote control cable 20M 8-pole 743420 Remote control cable 5M 6/7Pole Water For footpedal FTF- Water 743420 Remote control cable M 6/7Pole Water For footpedal FTF- Water Examples of accessories for PI 400 Plasma Footpedal 7-pole watercooled Art. no...78505 Remote control FSL Art. no...766382 Remote control FP Art. no...766380 9:2
Pressure regulators Argonex Nordic countries/ Estonia/Holland Germany/Eastern Europe/ elgium/portugal England bottom entry Outlet in/out W24,32x4/" - G3/8" W2,8x4/" - G/4" G5/8" - G3/8" MIGATRONIC Art. no. 8963058 8963098 8963084 Carbonex Nordic countries/ Estonia/Holland Germany/Eastern Europe/ elgium/portugal England bottom entry Outlet in/out W2,8x4/" - G3/8" W2,8x4/" - G/4" W2,8x4/" - G3/8" MIGATRONIC Art. no. 8963060 Optimator Nordic countries/ Estonia/Holland Germany/Eastern Europe/ elgium/portugal England bottom entry Outlet in/out W24,32x4/" - G3/8" W2,8x4/" - G/4" G5/8" - G3/8" MIGATRONIC Art. no. 896304 8963047 8963080 Optimator II Nordic countries/ Estonia/Holland Germany/Eastern Europe elgium/portugal England bottom entry Outlet in/out W24,32x4/" - G3/8" W2,8x4/" - G/4" G5/8" - G3/8" MIGATRONIC Art. no. 8963043 Optimator II AR/H2 Nordic countries/ Estonia/Holland Germany/Eastern Europe elgium/portugal England bottom entry Outlet in/out W2,8x4/"L - G3/8"L W2,8x4/"L - G3/8"L G5/8"L - G3/8"L MIGATRONIC Art. no. 8963044 Tigex I Argon/Mix Nordic countries/ Estonia/Holland Germany/Eastern Europe elgium/portugal England bottom entry Outlet in/out W24,32x4/" - G3/8" W2,8x4/" - G/4" G5/8" - G3/8" MIGATRONIC Art. no. 8963055 8963097 8963082 Tigex I CO 2 Nordic countries/ Estonia/Holland Germany/Eastern Europe elgium/portugal England bottom entry Outlet in/out W2,8x4/" - G3/8" W2,8x4/" - G/4" W2,8x4/" - G3/8" MIGATRONIC Art. no. 896306 8963097 Tigex II Argon/Mix Nordic countries/ Estonia/Holland Germany/Eastern Europe elgium/portugal England bottom entry Outlet in/out W24,32x4/" - G3/8" W2,8x4/" - G/4" G5/8" - G3/8" MIGATRONIC Art. no. 8963057 8963304 22:
Pressure regulators Argonex England side entry Italy France Outlet in/out G5/8" - G3/8" W24,52x4/" - G3/8" W2,8x4/" - M2" MIGATRONIC Art. no. 8963323 8963004 8963090 Carbonex England side entry Italy France Outlet in/out W2,8x4/" - G3/8" W2,8x4/" - G3/8" W2,8x4/" - M2" MIGATRONIC Art. no. 8963060 Optimator England side entry Italy France Outlet in/out G5/8" - G3/8" W24,52x4/" - G3/8" W2,8x4/" - M2" MIGATRONIC Art. no. 896308 8963324 896335 Optimator II England Italy France side entry Outlet in/out G5/8" - G3/8" W24,52x4/" - G3/8" W2,8x4/" - M2" MIGATRONIC Art. no. Optimator II AR/H2 England side entry Italy France Outlet in/out G5/8"L - G3/8"L W20x4/"L - G3/8"L W2,8x4/"L - G3/8"L MIGATRONIC Art. no. Tigex I Argon/Mix England side entry Italy Outlet in/out G5/8" - G3/8" W24,52x4/" - G3/8" MIGATRONIC Art. no. 8963083 8963320 France Tigex I CO 2 England side entry Italy Outlet in/out W2,8x4/" - G3/8" W2,8x4/" - G3/8" MIGATRONIC Art. no. France Tigex II Argon/Mix England side entry Italy Outlet in/out G5/8" - G3/8" W24,52x4/" - G3/8" MIGATRONIC Art. no. France 22:2
Pressure regulators Acetylene Nordic countries/ Estonia/Holland Germany/Eastern Europe/ elgium/portugal England bottom entry Outlet in/out G3/8" 5,3x7,5 Clamp - G3/8" L G5/8" L - G3/8" L MIGATRONIC Art. no. 8963065 Oxygen Nordic countries/ Estonia/Holland Germany/Eastern Europe/ elgium/portugal England bottom entry Outlet in/out W2,8x4/" - G3/8" W2,8x4/" - G/4" W2,8x4/" - G3/8" MIGATRONIC Art. no. 8963066 Acetylene England side entry Italy France Outlet in/out G5/8" L - G3/8" L (Clamp 20x) G5/8 L - G3/8" L MIGATRONIC Art. no. 8963306 (Clamp 20x) W22,9x4/" L - M6X,5 " L Oxygen England side entry Italy France Outlet in/out W2,8x4/" - G3/8" W2,8x4/" - G3/8" W2,8x4/" - M2" MIGATRONIC Art. no. 8963305 8963066 22:3
MIG/MAG ERGO Welding Hoses - aircooled Digital operational comfort and ergonomics in the torch handle Migatronic always endeavours to focus on simplicity and user friend liness; elements that result in satisfaction and, indirectly, better economy. all-and-socket joint relief at both ends of the hose is an example of innovative ergonomics as well as use of many combined materials in contact tips, gas diffusers, wire liners etc., all of which contributes to reli ability and longer life of the hoses. Migatronic's complete range of aircooled welding hoses offers a variety of thoroughly tested high-quality products. AREVIATIONS: ML = Migatronic aircooled torch F = Remote control/ Dialog KD = Separate tip adaptor T = Spring pins in central connection HD-S = Heavy Duty with x 40 mm nozzle FKS = Double cooling chamber with extra cooling of gas nozzle Price list Art. no. Model Unit price 809550 ML 50 3M K EH ZA 6 0,8 80955 ML 50 4M K EH ZA 6 0,8 809450 ML 50 F 3M K EH ZA 6 0,8 80945 ML 50 F 4M K EH ZA 6 0,8 8095240 ML240 3M K EH ZA 25 0,8 KD 809524 ML240 4M K EH ZA 25 0,8 KD 8094240 ML240 F 3M K EH ZA 25 0,8 KD 809424 ML240 F 4M K EH ZA 25 0,8 KD 8094242 MANAGER ML240 3M AHZA 25 0,8KD 8094243 MANAGER ML240 4M AHZA 25 0,8KD 8095250 ML 250 3M K EH ZA 25 0,8 KD 809525 ML 250 4M K EH ZA 25 0,8 KD 8094250 ML 250 F 3M K EH ZA 25 0,8 KD 809425 ML 250 F 4M K EH ZA 25 0,8 KD Art. no. Model Unit price 8095300 ML 300 3M K EH ZA 50,0 KD 809530 ML 300 4M K EH ZA 50,0 KD 8094300 ML 300 F 3M K EH ZA 50,0 KD 809430 ML 300 F 4M K EH ZA 50,0 KD 8095360 ML 360 3M K EH ZA 50,0 KD 809536 ML 360 4M K EH ZA 50,0 KD 8094360 ML 360 F 3M K EH ZA 50,0 KD 809436 ML 360 F 4M K EH ZA 50,0 KD 8094362 MANAGER ML360 3M AHZA 50,0KD 8094363 MANAGER ML360 4M AHZA 50,0KD Technical data MODEL ML 50 ML 240 ml 250 ML 300 ML 360 Duty cycle CO 2 60% 80 A 250 A 230 A 295 A 380 A Duty cycle CO 2 0% 60 A 225 A 205 A 260 A 340 A Mixgas 60% 70 A 220 A 225 A 255 A 3 A Mixgas 0% 50 A 95 A 200 A 225 A 270 A Gas flow +/-5% 5 l/min. * 5 l/min. * 5 l/min. * 5 l/min. * 5 l/min. * Wire diameter, mm 0.6-.2 0.6-.6 0.6-.6 0.6-.6 0.6-.6 Cable, mm 2 6 25 25 35 50 Weight 0.9 kg.2 kg.3 kg.6 kg.8 kg Total weight kg, 3 m.8 kg 2. kg 2. kg 3.9 kg 4.0 kg Connection ZA ZA ZA ZA ZA 23:
MIG/MAG ERGO Welding Hoses - aircooled SUITALE FOR MIG/MAG conventional stepregulated machines MIG/MAG thyristor and inverter machines WELDING HOSES Automig 8-273 Multimotive 220/22 (DUO) MIG C / S 305 MIG C / S 385 MIG C /S 445 MIG S 545 FLEX 3000 C/DUO Omega 80-220 Omega 270 SIGMA 2 300 C / S SIGMA 2 400 C / S SIGMA 2 500 C / S KMX 550 809450 ML 50 F 3M K EH ZA 6 0,8 * (*) * 80945 ML 50 F 4M K EH ZA 6 0,8 * * 809455 ML 50 F 3M ALU,0 * * * 809550 ML 50 3M K EH ZA 6 0,8 * * 80955 ML 50 4M K EH ZA 6 0,8 * * 8094240 ML240 F 3M K EH ZA 25 0,8 KD * * (*) * * * * 809424 ML240 F 4M K EH ZA 25 0,8 KD * * (*) * * * * 8094242 MANAGER ML240 3M AHZA 25 0,8KD KIT KIT 8094243 MANAGER ML240 4M AHZA 25 0,8KD KIT KIT 8095240 ML240 3M K EH ZA 25 0,8 KD * * (*) * * * * 809524 ML240 4M K EH ZA 25 0,8 KD * * (*) * * * * 8094250 ML 250 F 3M K EH ZA 25 0,8 KD * * (*) (*) * * * 809425 ML 250 F 4M K EH ZA 25 0,8 KD * * (*) (*) * * * 8094252 ML 250 F 3M K EH ZA 25 ALU,0 * * * 8095250 ML 250 3M K EH ZA 25 0,8 KD * * * * (*) * * * 809525 ML 250 4M K EH ZA 25 0,8 KD * * * * (*) * * * 8094300 ML 300 F 3M K EH ZA 50,0 KD * * * * * 809430 ML 300 F 4M K EH ZA 50,0 KD * * * * * 8095300 ML 300 3M K EH ZA 50,0 KD * * * * * * 809530 ML 300 4M K EH ZA 50,0 KD * * * * * * 8094360 ML 360 F 3M K EH ZA 50,0 KD * * * * * * (*) (*) (*) 809436 ML 360 F 4M K EH ZA 50,0 KD * * * * * * (*) (*) (*) 8094362 MANAGER ML360 3M AHZA 50,0KD KIT KIT (KIT) (KIT) (KIT) 8094363 MANAGER ML360 4M AHZA 50,0KD KIT KIT (KIT) (KIT) (KIT) 8095360 ML 360 3M K EH ZA 50,0 KD * * (*) (*) (*) 809536 ML 360 4M K EH ZA 50,0 KD * * (*) (*) (*) * Recommended (*) Not recommendable for maximum performance KIT Requires MIG Manager kit (KIT) Not recommendable for maximum performance - requires MIG Manager kit. MIG Manager with advanced remote control of FLEX, KMX and Sigma machines 23:2
Wear Parts for aircooled MIG/MAG Welding Hoses Wear Parts for ML 50 Position no. Item no. Description No of pcs. Unit price 2 80520 SWAN NECK ML50 STRAIGHT 22 805202 SWAN NECK ML50 CURVED 23 24 80020 8002 TIP ADAPTOR ML20/30/50 34MM CONTACT USH (PLUS 5) 25 80002 RETAINING CLAMP ML20/30/50 26 8030 8030202 8030203 8030204 CONT.TIP Ø0.6 M6 Ø6 X25MM E-CU CONT.TIP Ø0.8 M6 Ø8 X28MM E-CU CONT.TIP Ø.0 M6 Ø8 X28MM E-CU CONT.TIP Ø.2 M6 Ø8 X28MM E-CU 27 8040023 GAS NOZZLE ML20/30/50 CONIC 28 8040500 GAS NOZZLE ML20/30/50 CYLIN 29 8040022 GAS NOZZLE ML20/30/50 SPOT 50 50 50 50 Wear Parts for ML 250 Position no. Item no. Description No of pcs. Unit price 9 80530 SWAN NECK ML250 STRAIGHT 20 805302 SWAN NECK ML250 CURVED 2 800600 RETAINING CLAMP ML250 22 8060 TIPHOLDER ML250 M6 37MM 23 80602 TIPHOLDER ML250 M6 35MM 24 8030 8030202 8030203 8030204 CONT.TIP Ø0.6 M6 Ø6 X25MM E-CU CONT.TIP Ø0.8 M6 Ø8 X28MM E-CU CONT.TIP Ø.0 M6 Ø8 X28MM E-CU CONT.TIP Ø.2 M6 Ø8 x28mm E-CU 25 8040600 GAS NOZZLE ML250 CYLINDRIC 26 804060 GAS NOZZLE ML250 CONIC 50 50 50 50 Wear Parts for ML 240 Position no. Item no. Description No of pcs. Unit price 9 805402 805403 20 83077480 8307748 802203 2 8307749 80603 80604 22 8030 8030202 8030203 8030204 SWAN NECK ML240 CURVED SWAN NECK ML240 MANAGER GAS DIFFUSER ML/MV24 LACK GAS DIFFUSER ML/MV24 WHITE GAS DIFFUSER ML/MV24 CERAMIC TIP ADAPTOR ML/MV240 MS 5MM TIP ADAPTOR ML/MV240 MS 7MM TIPHOLDER ML-MV240 CUCRZR 5MM CONT.TIP Ø0.6 M6 Ø6 X25MM E-CU CONT.TIP Ø0.8 M6 Ø8 X28MM E-CU CONT.TIP Ø.0 M6 Ø8 X28MM E-CU CONT.TIP Ø.2 M6 Ø8 X28MM E-CU 23 80406 GAS NOZZLE ML/MV240 CONIC 24 80406 GAS NOZZLE ML/MV240 CYLINDRIC 50 50 50 50 23:3
Wear Parts for aircooled MIG/MAG Welding Hoses Wear Parts for ML 300 / ML 360 Position no. Item no. Description No of pcs. Unit price 9 80560 8025607 SWAN NECK ML360 STRAIGHT SWAN NECK ML360 MANAGER 20 805602 SWAN NECK ML360 CURVED 2 80550 SWAN NECK ML300 STRAIGHT 22 805502 SWAN NECK ML300 CURVED 23 802030 8020306 24 802636 802637 25 80026 80300 26 8030 8030202 8030203 8030204 27 80240300 804070 28 80240303 8040700 80240304 GAS DIFFUSER ML300/360 WHITE GAS DIFFUSER ML360 LONG 32MM TIPHOLDER ML300/360 M8-6 25MM TIPHOLDER ML300/360 M8-6 32MM TIPHOLDER ML300/360 M8-6 22MM TIPHOLDER ML300/360 M8-8 23MM CONT.TIP Ø0.6 M6 Ø6 X25MM E-CU CONT.TIP Ø0.8 M6 Ø8 X28MM E-CU CONT.TIP Ø.0 M6 Ø8 X28MM E-CU CONT.TIP Ø.2 M6 Ø8 X28MM E-CU GAS NOZZLE ML/MV CYLINDRIC GAS NOZZLE ML360 CYLIN. FONIKL GAS NOZZLE ML/MV CONIC GAS NOZZLE ML360 CONIC FONIKL GAS NOZZLE ML/MV SUPER CONIC 50 50 50 50 23:4
MIG/MAG ERGO Welding Hoses - watercooled Digital operational comfort and ergonomics in the torch handle Migatronic always endeavours to focus on simplicity and userfriend liness; elements that result in satisfaction and, indirectly, better economy. all-and-socket joint relief at both ends of the hose is an example of innovative ergonomics as well as use of many combined materials in contact tips, gas diffusers, wire liners etc., all of which contributes to reli ability and longer life of the hoses. Migatronic's complete range of aircooled welding hoses offers a variety of thoroughly tested high-quality products. Price list Art. no. Model Unit price 80295240 MV240 3M K EH ZA 6.0 KD 8029524 MV240 4M K EH ZA 6.0 KD 80294240 MV240 F 3M K EH ZA 6,0 KD 8029424 MV240 F 4M K EH ZA 6,0 KD 80294245 MANAGER MV240 3M AHZA 6,0KD 80294246 MANAGER MV240 4M AHZA 6,0KD 80295602 MV400 FKS 3M K EH ZA 6,2KD 80295603 MV400 FKS 4M K EH ZA 6,2KD 80294602 MV400 FKS F3M K EH ZA 6,2KD 80294603 MV400 FKS F4M K EH ZA 6,2KD 80294660 MANAGER FKS400 3M AH ZA 6,2 8029466 MANAGER FKS400 4M AH ZA 6,2 880295450 MV450 3M K EH ZA 6,2 KD 8029545 MV450 4M K EH ZA 6,2 KD 80295452 MV450 3M K EH ZA 6,2 80295453 MV450 4M K EH ZA 6,2 80294450 MV450 F 3M K EH ZA 6,2 KD 8029445 MV450 F 4M K EH ZA 6,2 KD AREVIATIONS: MV = Migatronic watercooled torch F = Remote control/ Dialog KD = Separate tip adaptor T = Spring pins in central connection HD-S = Heavy Duty with x 40 mm nozzle FKS = Double cooling chamber with extra cooling of gas nozzle Art. no. Model Unit price 80294452 MV450 F 3M K EH ZA 6,2 80294453 MV450 F 4M K EH ZA 6,2 80295700 MV500 FKS 3M K EH ZA 6,2KD 8029570 MV500 FKS 4M K EH ZA 6,2KD 80294700 MV500 FKS F3M K EH ZA 6,2KD 8029470 MV500 FKS F4M K EH ZA 6,2KD 80294702 MANAGER FKS500 3M AH ZA 6,2 80294703 MANAGER FKS500 4M AH ZA 6,2 80295550 MV550 3M K EH ZA 6,2 KD 8029555 MV550 4M K EH ZA 6,2 KD 80295552 MV550 3M K EH ZA 6,2 80295553 MV550 4M K EH ZA 6,2 80294550 MV550 F 3M K EH ZA 6,2 KD 8029455 MV550 F 4M K EH ZA 6,2 KD 80294552 MV550 F 3M K EH ZA 6,2 80294553 MV550 F 4M K EH ZA 6,2 Technical data MODEL MV 240 MV 400 FKS MV 450 MV 500 FKS MV 550 Duty cycle CO 2 60% 300 A 45 A 450 A 560 A 550 A Duty cycle CO 2 0% 300 A 45 A 450 A 560 A 550 A Mixgas 60% 270 A 350 A 400 A 520 A 500 A Mixgas 0% 270 A 350 A 400 A 520 A 500 A Gas flow +/-5% 5 l/min. 8 l/min. 8 l/min. 8 l/min. 8 l/min. Wire diameter, mm 0.6-.8 0.8-2.4 0.6-3.2 0.8-2.4 0.6-3.2 Cable, mm 2 6 6 6 6 6 Weight **.5 kg.6 kg.6 kg.7 kg.6 kg Total weight kg, 3 m 3.0 kg 3. kg 3.0 kg 3.2 kg 3.0 kg Connection ZA ZA ZA ZA ZA 23:5
SUITALE FOR MIG/MAG conventional stepregulated machines MIG/MAG thyristor and inverter machines WELDING HOSES MIG C / S 385 MIG C /S 445 MIG S 545 FLEX 3000 C/DUO SIGMA 2 300 C / S SIGMA 2 400 C / S SIGMA 2 500 C / S KMX 550 80294240 MV240 F 3M K EH ZA 6,0 KD * * (*) (*) * (*) 8029424 MV240 F 4M K EH ZA 6,0 KD * * (*) (*) * (*) 80294245 MANAGER MV240 3M AHZA 6,0KD (KIT) KIT (KIT) 80294246 MANAGER MV240 4M AHZA 6,0KD (KIT) KIT (KIT) 80295240 MV240 3M K EH ZA 6.0 KD * * (*) (*) * (*) 8029524 MV240 4M K EH ZA 6.0 KD * * (*) (*) * (*) 80294602 MV400 FKS F3M K EH ZA 6,2KD * * (*) * * * (*) (*) 80294603 MV400 FKS F4M K EH ZA 6,2KD * * (*) * * * (*) (*) 80294660 MANAGER FKS400 3M AH ZA 6,2 KIT KIT KIT (KIT) (KIT) 8029466 MANAGER FKS400 4M AH ZA 6,2 KIT KIT KIT (KIT) (KIT) 80295602 MV400 FKS 3M K EH ZA 6,2KD * * (*) * * * (*) (*) 80295603 MV400 FKS 4M K EH ZA 6,2KD * * (*) * * * (*) (*) 80294450 MV450 F 3M K EH ZA 6,2 KD * * (*) * * * (*) (*) 8029445 MV450 F 4M K EH ZA 6,2 KD * * (*) * * * (*) (*) 80294452 MV450 F 3M K EH ZA 6,2 * * (*) * * * (*) (*) 80294453 MV450 F 4M K EH ZA 6,2 * * (*) * * * (*) (*) 80295450 MV450 3M K EH ZA 6,2 KD * * (*) * * * (*) (*) 8029545 MV450 4M K EH ZA 6,2 KD * * (*) * * * (*) (*) 80295452 MV450 3M K EH ZA 6,2 * * (*) * * * (*) (*) 80295453 MV450 4M K EH ZA 6,2 * * (*) * * * (*) (*) 80294700 MV500 FKS F3M K EH ZA 6,2KD * * * * * 8029470 MV500 FKS F4M K EH ZA 6,2KD * * * * * 80294702 MANAGER FKS500 3M AH ZA 6,2 KIT KIT KIT * 80294703 MANAGER FKS500 4M AH ZA 6,2 KIT KIT KIT * 80295700 MV500 FKS 3M K EH ZA 6,2KD * * * * * 8029570 MV500 FKS 4M K EH ZA 6,2KD * * * * * 80294550 MV550 F 3M K EH ZA 6,2 KD * * * * * * * 8029455 MV550 F 4M K EH ZA 6,2 KD * * * * * * * 80294552 MV550 F 3M K EH ZA 6,2 * * * * * * * 80294553 MV550 F 4M K EH ZA 6,2 * * * * * * * 80295550 MV550 3M K EH ZA 6,2 KD * * * * * * * 8029555 MV550 4M K EH ZA 6,2 KD * * * * * * * 80295552 MV550 3M K EH ZA 6,2 * * * * * * * 80295553 MV550 4M K EH ZA 6,2 * * * * * * * * Recommended (*) Not recommendable for maximum performance KIT Requires MIG Manager/Push pull kit (KIT) Not recommendable for maximum performance - requires MIG/Manager/Push pull kit. 23:6
Wear Parts for watercooled MIG/MAG Welding Hoses Wear Parts for MV 240 Position no. Item no. Description No of pcs. Unit price 9 8025 80257 20 83077480 8307748 802203 2 8307749 80603 80604 22 8030 8030202 8030203 8030204 SWAN NECK MV240 CURVED SWAN NECK MV240 MANAGER GAS DIFFUSER ML/MV24 LACK GAS DIFFUSER ML/MV24 WHITE GAS DIFFUSER ML/MV24 CERAMIC TIP ADAPTOR ML/MV240 MS 5MM TIP ADAPTOR ML/MV240 MS 7MM TIPHOLDER ML-MV240 CUCRZR 5MM CONT.TIP Ø0.6 M6 Ø6 X25MM E-CU CONT.TIP Ø0.8 M6 Ø8 X28MM E-CU CONT.TIP Ø.0 M6 Ø8 X28MM E-CU CONT.TIP Ø.2 M6 Ø8 X28MM E-CU 23 80406 GAS NOZZLE ML/MV240 CONIC 24 80406 GAS NOZZLE ML/MV240 CYLINDRIC 50 50 50 50 Wear Parts for MV 400 FKS Position no. Item no. Description No of pcs. Unit price 5 8025500 802550 SWAN NECK MV400 FKS SWAN NECK MV400FKS MANAGER 7 80408 TIP ADAPTOR MV400FKS 24MM 2 80240308 GAS NOZZLE MV400FKS CYL. 62MM 22 80240307 GAS NOZZLE MV400FKS CON. 62MM 23 8024037 GAS NOZZLE MV400FKS CON. 67MM 24 8024038 GAS NOZZLE MV400FKS CYL. 67MM Wear Parts for MV 500 FKS Position no. Item no. Description No of pcs. Unit price 5 8025502 SWAN NECK MV500 FKS 7 804 TIP ADAPT.MV500FKS 38MM CUCRZR 9 8022032 8022033 20 8023 80232 80233 80236 GAS DIFFUSER MV FKS/HD-S WHITE GAS DIFFUSER MV FKS/HD-S CERAM CONTTIP Ø0.8 M8 ØX30MM E-CU CONTTIP Ø.0 M8 ØX30MM E-CU CONTTIP Ø.2 M8 ØX30MM E-CU CONTTIP Ø.4 M8 Ø X30MM E-CU 2 80240300 GAS NOZZLE ML/MV CYLINDRIC 22 80240303 80240304 GAS NOZZLE ML/MV CONIC GAS NOZZLE ML/MV SUPER CONIC 23 8040700 GAS NOZZLE ML360 CONIC FONIKL 24 804070 GAS NOZZLE ML360 CYLIN. FONIKL 50 50 50 50 23:7
Wear Parts for watercooled MIG/MAG Welding Hoses Wear Parts for MV 450 / 550 Position no. Item no. Description No of pcs. Unit price 5 802520 SWAN NECK MV450 KD STRAIGHT 6 8025202 SWAN NECK MV450 KD CURVED 7 8025203 SWAN NECK MV450 STRAIGHT 8 8025204 SWAN NECK MV450 CURVED 5 802530 SWAN NECK MV550 KD STRAIGHT 6 8025302 SWAN NECK MV550 KD CURVED 7 8025303 SWAN NECK MV550 STRAIGHT 8 8025304 SWAN NECK MV550 CURVED 9 80220303 INSULATING WASHER MV450/550 20 8040 TIPHOLDER MV450/550 M8 25MM 2 80402 80403 80409 23 80220309 802203 80220306 TIPHOLDER MV450/550 M8 29MM TIPHOLDER MV450/550 M6 25MM TIPHOLDER MV450-550 CUCRZR 29 GAS DIFFUSER MV450/550 WHITE GAS DIFFUSER MV450/550 CERAMIC GAS DIFFUSER MV450/550 LACK 24 80220307 GAS DIFFUSER MV450/550 CYLINDR 26 8023 80232 80233 80234 80236 27 80240300 804070 28 80240303 8040700 80240304 CONTTIP Ø0.8 M8 ØX30MM E-CU CONTTIP Ø.0 M8 ØX30MM E-CU CONTTIP Ø.2 M8 ØX30MM E-CU CONTTIP Ø.6 M8 ØX30MM E-CU CONTTIP Ø.4 M8 Ø X30MM E-CU GAS NOZZLE ML/MV CYLINDRIC GAS NOZZLE ML360 CYLIN. FONIKL GAS NOZZLE ML/MV CONIC GAS NOZZLE ML360 CONIC FONIKL GAS NOZZLE ML/MV SUPER CONIC 50 50 50 50 50 23:8
TIG ERGO Welding Hoses Ergonomically designed welding hoses The new range of TIG welding hoses consists of six families: the aircooled TIG, TIG 20 and TIG 22 and the watercooled TIG 30, TIG 32 and 40. From the small, lightweight TIG to the TIG 40 which is designed for high performance TIG welding with high duty cycle and up to 400A DC welding current. The 50 variants differ in current intensity, flexible torch body, length of cable (4 or 8 m). 6 or 7 pole plug and choice of built-in control unit in the torch handle. Handle with softgrip In the new design, ergonomics, flexibility and reliability have been brought into focus. The torch handle is available in two sizes, both of which have ball and socket joint relief and softgrip on the sides of the handle for safe, ease of grip ability. Technical data AREVIATIONS: TIG 20 = Model HD = Heavy duty R = Control for Migatronic TIG machines (Dialog) FLEX = Flexible torch body 8 m = Length RH = Horisontal regulation RV = Vertical regulation MODEL tig TIG 20 TIG 20HD TIG 22 TIG 30 TIG 32 TIG 40 Duty cycle DC 60% 90 A A 30 A 30 A 230 A 325 A 400 A Duty cycle AC 60% 65 A 75 A 90 A 90 A 60 A 230 A 280 A Duty cycle DC 0% 80 A 90 A A A 225 A 325 A 400 A Duty cycle AC 0% 55 A 65 A 80 A 80 A 60 A 230 A 280 A Cooling Air Air Air Air Water Water Water Electrode diameter, mm.0-2.4.0-2.4.0-2.4.0-2.4.0-3.2.0-3.2.0-4.0 Gas flow +-5%. I / min. 7 7 7 7 9 9 Cable, mm 2 5 5 35 2 4 / 6 (8 m) 2 / 5 (8 m) 2 / 5 (8 m) Weight at m height* 0.8 kg.0 kg. kg. kg 0.8 kg.0 kg. kg Total weight, 4 m.7 kg.9 kg 2.0 kg 2.0 kg.5 kg 2.0 kg 2.2 kg A Migatronic TIG welding hose is equipped with an easily replaceable control unit on the torch handle. As standard the control unit consists of a keypad unit but for use on Migatronic TIG machines, we recommend a control unit with both keypad unit and control knob. 803002 lank cover. For use with e.g. foot switch. 803000 Keypad unit 80300 Keypad unit with vertical TIG control knob (RV). 8030030 Keypad unit with horisontal TIG control knob (RH). Applicaple for most Migatronic machines 24:
TIG welding hoses SUITALE FOR TIG & MMA machines WELDING HOSES DELTA 60 HP PI 200 PI 250 PI 320 PI 400 PI 500 TIG ERGO RANGE 7-pole (*) (*) (*) TIG ERGO 20 RANGE 7-pole * * * TIG ERGO 22 RANGE 7-pole * * * TIG ERGO 30 RANGE 7-pole * * * * TIG ERGO 32 RANGE 7-pole * * * * TIG ERGO 40 RANGE 7-pole * * * * * Recommended (*) Not recommendable for maximum performance 24:4
Wear Parts for TIG Ergo Welding Hoses Wear Parts for TIG Ergo TIG is a small, lightweight aircooled TIG welding hose for use in hard-toreach locations and where welding current does not exceed approx. 0 A DC. TIG is typically used for production and on-site repairs in stainless materials. TIG can be equipped with all wearing parts displayed to the right, and the control unit is easily replaced. Position no. Item no. Description No of pcs. Unit price 4 804007 ELECT. CLAMP LONG TIG -30 5 804006 ELECT.CLAMP MEDIUM TIG -30 6 804005 ELECT. CLAMP SHORT TIG -30 7 80400204 O-RING ELECTR. CAP TIG0/300 8 8030094 TORCH ODY TIG 60MM 9 8030095 80300050 8030005 80300052 TORCH ODY TIG F 60MM TORCH ODY TIG F 85MM TORCH ODY TIG F 0MM TORCH ODY TIG F 35MM 8030029 INSULATOR TIG/30 8043020 80430202 80430203 80430204 2 80424 80425 80426 80427 3 804402 804402 8044022 8044023 4 80420 804202 804203 5a 8044020 80440202 80440203 80440204 80440205 5b 80440220 8044022 80440222 80440223 5c 80440230 8044023 80440232 80440233 803007 80228 ELECT. CLAMP Ø.0 MM CuCrZr ELECT. CLAMP Ø.6 MM CuCrZr ELECT. CLAMP Ø2.4 MM CuCrZr ELECT. CLAMP Ø3.2 MM CuCrZr GAS LENS II,0MM -30 GAS LENS II,6MM -30 GAS LENS II 2,4MM -30 GAS LENS II 3,2MM -30 GAS NOZZLE GAS L TIG/30 #4 GAS NOZZLE GAS L TIG/30 #5 GAS NOZZLE GAS L TIG/30 #6 GAS NOZZLE GAS L TIG/30 #7 ELECTR.HOLDER Ø.0 TIG/30 ELECTR.HOLDER Ø.6 TIG/30 ELECTR.HOLDER Ø2.4 TIG/30 GAS NOZZLE TIG/30 #4 GAS NOZZLE TIG/30 #5 GAS NOZZLE TIG/30 #6 GAS NOZZLE TIG/30 #7 GAS NOZZLE TIG/30 #8 GAS NOZZLE LONG 48MM #3L GAS NOZZLE LONG 48MM #4L GAS NOZZLE LONG 48MM #5L GAS NOZZLE LONG 48MM #6L GAS NOZZLE X-LONG 64MM #3XL GAS NOZZLE X-LONG 64MM #4XL GAS NOZZLE X-LONG 64MM #5XL GAS NOZZLE X-LONG 64MM #6XL STD.WEARINGPART SET TIG WEARPARTS OX TIG /30 24:5
Wear Parts for TIG Ergo Welding Hoses Wear Parts for TIG Ergo 20 / 20 HD TIG 20 is supplied with a small handle and a very flexible cable. For high performance welding, use the TIG 20 HD version. TIG 20 HD is supplied with a large handle and a stronger cable for full performance and high duty cycle. TIG 20 is typically used for production and on-site repairs in stainless materials and aluminium. TIG 20 can be equipped with all wearing parts displayed to the right, and the control unit is easily replaced. Position no. Item no. Description No of pcs. Unit price 4 8030020 ELECTR. CAP LONG TIG20-40 5 80300200 ELECTR. CAP SHORT TIG 20-40 6 80300223 O-RING F. CAP TIG20/40 7 8030096 TORCH ODY TIG 20 70MM 8 8030097 TORCH ODY TIG 20F 70MM 9 8030089 INSULATOR TIG 20-40 803300 80330 803302 803303 803304 8034 80342 80343 80344 80345 2 80340400 8034040 80340402 80340403 80340404 80340406 3 803004 803000 80300 803002 803003 4 8034000 80340002 80340003 80340004 80340005 80340006 80340007 ELECTR. CLAMP Ø.0 MM CuCrZr ELECTR. CLAMP Ø.6 MM CuCrZr ELECTR. CLAMP Ø2.4 MM CuCrZr ELECTR. CLAMP Ø3.2 MM CuCrZr ELECTR. CLAMP Ø4.0 MM CuCrZr GAS LENS.0 MM TIG 20-40 GAS LENS.6 MM TIG 20-40 GAS LENS 2.4 MM TIG 20-40 GAS LENS 3.2 MM TIG 20-40 GAS LENS 4.0 MM TIG 20-40 NOZZLE F.GAS L TIG20/40 #4 NOZZLE F. GAS L TIG20/40 #5 NOZZLE F. GAS L TIG20/40 #6 NOZZLE F.GAS L TIG20/40 #7 NOZZLE F. GAS L TIG20/40 #8 NOZZLE F.GAS L TIG20/40 #2 ELECTR.HOLDER Ø.0 TIG20/40 ELECTR.HOLDER Ø.6 TIG20/40 ELECTR.HOLDER Ø2.4 TIG20/40 ELECTR.HOLDER Ø3.2 TIG20/40 ELECTR.HOLDER Ø4.0 TIG20/40 GAS NOZZLE TIG20/40 #4 GAS NOZZLE TIG20/40 #5 GAS NOZZLE TIG20/40 #6 GAS NOZZLE TIG20/40 #7 GAS NOZZLE TIG20/40 #8 GAS NOZZLE TIG20/40 # GAS NOZZLE TIG20/40 #2 5 80300220 GAS LENS INSULATOR TIG20-40 803008 80230 STD.WEARINGPART SET TIG20-40 WEARPARTS OX TIG 20/40 24:6
Wear Parts for TIG Ergo Welding Hoses Wear Parts for TIG Ergo 22 TIG 22 is an extra robust aircooled TIG welding hose. TIG 22 is equipped with a large handle and a very flexible cable. For higher performance, use the gas for cooling of the cable. TIG 22 is typically used for production and heavy duty welding in aluminium and stainless steel. TIG 22 can be equipped with all wearing parts displayed to the right, and the control unit is easily replaced. Position no. Item no. Description No of pcs. Unit price 6 8030020 ELECTR. CAP LONG TIG20-40 7 80300200 ELECTR. CAP SHORT TIG 20-40 8 80300223 O-RING F. CAP TIG20/40 9 80300237 TIG 22 TORCH ODY 80300238 TIG 22F TORCH ODY 8030089 INSULATOR TIG 20-40 2 803300 80330 803302 803303 803304 3 8034 80342 80343 80344 80345 4 80340400 8034040 80340402 80340403 80340404 80340406 5 803004 803000 80300 803002 803003 6 8034000 80340002 80340003 80340004 80340005 80340006 80340007 ELECTR. CLAMP Ø.0 MM CuCrZr ELECTR. CLAMP Ø.6 MM CuCrZr ELECTR. CLAMP Ø2.4 MM CuCrZr ELECTR. CLAMP Ø3.2 MM CuCrZr ELECTR. CLAMP Ø4.0 MM CuCrZr GAS LENS.0 MM TIG 20-40 GAS LENS.6 MM TIG 20-40 GAS LENS 2.4 MM TIG 20-40 GAS LENS 3.2 MM TIG 20-40 GAS LENS 4.0 MM TIG 20-40 NOZZLE F.GAS L TIG20/40 #4 NOZZLE F. GAS L TIG20/40 #5 NOZZLE F. GAS L TIG20/40 #6 NOZZLE F.GAS L TIG20/40 #7 NOZZLE F. GAS L TIG20/40 #8 NOZZLE F.GAS L TIG20/40 #2 ELECTR.HOLDER Ø.0 TIG20/40 ELECTR.HOLDER Ø.6 TIG20/40 ELECTR.HOLDER Ø2.4 TIG20/40 ELECTR.HOLDER Ø3.2 TIG20/40 ELECTR.HOLDER Ø4.0 TIG20/40 GAS NOZZLE TIG20/40 #4 GAS NOZZLE TIG20/40 #5 GAS NOZZLE TIG20/40 #6 GAS NOZZLE TIG20/40 #7 GAS NOZZLE TIG20/40 #8 GAS NOZZLE TIG20/40 # GAS NOZZLE TIG20/40 #2 7 80300220 GAS LENS INSULATOR TIG20-40 803008 80230 STD.WEARINGPART SET TIG20-40 WEARPARTS OX TIG 20/40 24:7
Wear Parts for TIG Ergo Welding Hoses Wear Parts for TIG Ergo 30 Watercooling ensures low temperatures in torch and torch handle which also increases welding comfort and durability. TIG 30 is typically used for industrial production of boilers and tanks in steel, stainless steel and aluminium. TIG 30 can be equipped with all wearing parts displayed to the right, and the control unit is easily replaced. Position no. Item no. Description No of pcs. Unit price 4 804007 ELECT. CLAMP LONG TIG -30 5 804006 ELECT.CLAMP MEDIUM TIG -30 6 804005 ELECT. CLAMP SHORT TIG -30 7 80400204 O-RING ELECTR. CAP TIG0/300 8 804003 TORCH ODY TIG 30 55MM 9 804003 8040034 8040035 8040036 TORCH ODY TIG 30F 55MM TORCH ODY TIG 30 F 85MM TORCH ODY TIG 30 F 5MM TORCH ODY TIG 30 F 35MM 8030029 INSULATOR TIG/30 8043020 80430202 80430203 80430204 2 80424 80425 80426 80427 3 804402 804402 8044022 8044023 4 80420 804202 804203 5a 8044020 80440202 80440203 80440204 80440205 5b 80440220 8044022 80440222 80440223 5c 80440230 8044023 80440232 80440233 803009 80228 ELECT. CLAMP Ø.0 MM CuCrZr ELECT. CLAMP Ø.6 MM CuCrZr ELECT. CLAMP Ø2.4 MM CuCrZr ELECT. CLAMP Ø3.2 MM CuCrZr GAS LENS II,0MM -30 GAS LENS II,6MM -30 GAS LENS II 2,4MM -30 GAS LENS II 3,2MM -30 GAS NOZZLE GAS L TIG/30 #4 GAS NOZZLE GAS L TIG/30 #5 GAS NOZZLE GAS L TIG/30 #6 GAS NOZZLE GAS L TIG/30 #7 ELECTR.HOLDER Ø.0 TIG/30 ELECTR.HOLDER Ø.6 TIG/30 ELECTR.HOLDER Ø2.4 TIG/30 GAS NOZZLE TIG/30 #4 GAS NOZZLE TIG/30 #5 GAS NOZZLE TIG/30 #6 GAS NOZZLE TIG/30 #7 GAS NOZZLE TIG/30 #8 GAS NOZZLE LONG 48MM #3L GAS NOZZLE LONG 48MM #4L GAS NOZZLE LONG 48MM #5L GAS NOZZLE LONG 48MM #6L GAS NOZZLE X-LONG 64MM #3XL GAS NOZZLE X-LONG 64MM #4XL GAS NOZZLE X-LONG 64MM #5XL GAS NOZZLE X-LONG 64MM #6XL STD.WEARINGPART SET TIG30 WEARPARTS OX TIG /30 24:8
Wear Parts for TIG Ergo Welding Hoses Wear Parts for TIG Ergo 32 TIG 32 is an extra robust watercooled TIG welding hose. TIG 32 is equipped with a small torch body and a large handle plus a strong power cable for higher performance. TIG 32 is typically used for welding in steel, stainless steel and aluminium. TIG 32 can be equipped with all wearing parts displayed to the right, and the control unit is easily replaced. Position no. Item no. Description No of pcs. Unit price 4 804007 ELECT. CLAMP LONG TIG -30 5 804006 ELECT.CLAMP MEDIUM TIG -30 6 804005 ELECT. CLAMP SHORT TIG -30 7 80400204 O-RING ELECTR. CAP TIG0/300 8 804003 TORCH ODY TIG 30 55MM 9 804003 TORCH ODY TIG 30F 55MM 8030029 INSULATOR TIG/30 8043020 80430202 80430203 80430204 2 80424 80425 80426 80427 3 804402 804402 8044022 8044023 4 80420 804202 804203 5a 8044020 80440202 80440203 80440204 80440205 5b 80440220 8044022 80440222 80440223 5c 80440230 8044023 80440232 80440233 ELECT. CLAMP Ø.0 MM CuCrZr ELECT. CLAMP Ø.6 MM CuCrZr ELECT. CLAMP Ø2.4 MM CuCrZr ELECT. CLAMP Ø3.2 MM CuCrZr GAS LENS II,0MM -30 GAS LENS II,6MM -30 GAS LENS II 2,4MM -30 GAS LENS II 3,2MM -30 GAS NOZZLE GAS L TIG/30 #4 GAS NOZZLE GAS L TIG/30 #5 GAS NOZZLE GAS L TIG/30 #6 GAS NOZZLE GAS L TIG/30 #7 ELECTR.HOLDER Ø.0 TIG/30 ELECTR.HOLDER Ø.6 TIG/30 ELECTR.HOLDER Ø2.4 TIG/30 GAS NOZZLE TIG/30 #4 GAS NOZZLE TIG/30 #5 GAS NOZZLE TIG/30 #6 GAS NOZZLE TIG/30 #7 GAS NOZZLE TIG/30 #8 GAS NOZZLE LONG 48MM #3L GAS NOZZLE LONG 48MM #4L GAS NOZZLE LONG 48MM #5L GAS NOZZLE LONG 48MM #6L GAS NOZZLE X-LONG 64MM #3XL GAS NOZZLE X-LONG 64MM #4XL GAS NOZZLE X-LONG 64MM #5XL GAS NOZZLE X-LONG 64MM #6XL 24:9
Wear Parts for TIG Ergo Welding Hoses Wear Parts for TIG Ergo 40 TIG 40 is the strongest model in our range of TIG welding hoses. TIG 40 is watercooled and constructed for heavy-duty welding. TIG 40 is designed for high performance welding with high duty cycle and up to 400A DC welding current. TIG 40 is typically used for production and on-site repairs in stainless steel and aluminium in thick wallthicknesses. Position no. Item no. Description No of pcs. Unit price 4 8030020 ELECTR. CAP LONG TIG20-40 5 80300200 ELECTR. CAP SHORT TIG 20-40 6 80300223 O-RING F. CAP TIG20/40 7 80400422 TORCH ODY TIG 40 80MM 8 80400423 TORCH ODY TIG 40F 80MM 9 8030089 INSULATOR TIG 20-40 803300 80330 803302 803303 803304 8034 80342 80343 80344 80345 2 80340400 8034040 80340402 80340403 80340404 80340406 3 803004 803000 80300 803002 803003 4 8034000 80340002 80340003 80340004 80340005 80340006 80340007 ELECTR. CLAMP Ø.0 MM CuCrZr ELECTR. CLAMP Ø.6 MM CuCrZr ELECTR. CLAMP Ø2.4 MM CuCrZr ELECTR. CLAMP Ø3.2 MM CuCrZr ELECTR. CLAMP Ø4.0 MM CuCrZr GAS LENS.0 MM TIG 20-40 GAS LENS.6 MM TIG 20-40 GAS LENS 2.4 MM TIG 20-40 GAS LENS 3.2 MM TIG 20-40 GAS LENS 4.0 MM TIG 20-40 NOZZLE F.GAS L TIG20/40 #4 NOZZLE F. GAS L TIG20/40 #5 NOZZLE F. GAS L TIG20/40 #6 NOZZLE F.GAS L TIG20/40 #7 NOZZLE F. GAS L TIG20/40 #8 NOZZLE F.GAS L TIG20/40 #2 ELECTR.HOLDER Ø.0 TIG20/40 ELECTR.HOLDER Ø.6 TIG20/40 ELECTR.HOLDER Ø2.4 TIG20/40 ELECTR.HOLDER Ø3.2 TIG20/40 ELECTR.HOLDER Ø4.0 TIG20/40 GAS NOZZLE TIG20/40 #4 GAS NOZZLE TIG20/40 #5 GAS NOZZLE TIG20/40 #6 GAS NOZZLE TIG20/40 #7 GAS NOZZLE TIG20/40 #8 GAS NOZZLE TIG20/40 # GAS NOZZLE TIG20/40 #2 5 80300220 GAS LENS INSULATOR TIG20-40 803008 80230 STD.WEARINGPART SET TIG20-40 WEARPARTS OX TIG 20/40 TIG 40 can be equipped with all wearing parts displayed to the right, and the control unit is easily replaced. 24:
Special Solutions Sigma 400 triple version, watercooled, with tall column and MWF 4 wire feed unit without control panel, in a setup with Pi TIG with cooling unit. Sigma 400 C triple version in a setup with Pi 250 AC/DC TIG. oth machines are watercooled from the same cooling unit. CWF Multi mounted on rotary fittings. CWF Multi Cold Wire Feeder can be used for Pi 320/400/500 TIG and Pi 400 Plasma. Sigma with 2 MWF 4 wirefeed units and double relief arm. This solution optimizes quick change-over and setup for welding with different wires and contributes to correct ergonomics and working posture for the welder. Sigma with pivot arm and RWF Multi, feeding wire from a 250 kg spool - a solution that gives a large operating range. Control of MWF 4 wire-feed unit and RWF Multi from the control panel of the welding machine. If you do not find the required special solution here, please contact Migatronic. 28: