: Rough Terrain Wheelchair A robust and sturdy 3-wheel design that provides extra stability and easy propulsion over uneven ground. Product Code WM3-01 Motivation Rough Terrain Wheelchair Product Description Manufacture Rough terrain, adjustable, active 3 wheel wheelchair Made in China under licence from Motivation Document Issue 7 Date of issue 17 June 2015 Overview The Motivation Rough Terrain wheelchair is an active style, rough terrain wheelchair allowing either self or attendant propulsion. It consists of a tubular steel frame, with aluminium components and zinc plated steel fasteners. It has a single large rubber castor wheel at the front and a long wheelbase. This helps the user to propel safely over uneven and inclined ground. The wheelchair has been designed so that parts are easy to replace or repair and uses common wheel and bearing sizes. The boxed flat-pack wheelchair kit comes in a choice of four width sizes. All other wheelchair adjustments can be adjusted at the prescription and fitting stage for each individual user. The wheelchair is individually assembled and fitted to each user by trained assemblers & prescribers. The wheelchair and its packaging are designed for easy disassembly for recycling or reuse. Every wheelchair is supplied with a contoured pressure relieving cushion, which can be cut-to-size for each user. Each cushion has a water resistant size adjustable cover. Reflective stickers are located on the front and back of the wheelchair for increased visibility and safety. 1 Product summary: Rough Terrain Wheelchair
Product user group A B C The wheelchair can be used by people with a range of mobility disabilities. It is most suited to people living in areas of rough terrain. The chair is suitable for users whose body measurements fall within the following ranges: A. Hip width: 360 480 mm B. Buttock to back of knee: 430-540 mm C. Back of knee height from bottom of feet: 310 430 mm Maximum user weight: 113 kgs or 250 lbs. Environment The wheelchair is designed for better performance over rough ground and in conditions normally found in rural areas, however it can also be used in urban and semi-urban areas. The long wheelbase, large front castor wheel and cambered rear wheels provide stability and easy riding over uneven ground. Users may still require assistance over extremely rough ground, high curbs or steep inclines. Although the wheelchair is primarily for outdoor use it is suitable for use indoors. Users may experience some limitations in very confined spaces because of its long wheelbase. Wheelchair adjustments Back wheel (balance) position Backrest angle Backrest height Footrest angle The WM3 can be prescribed in active and safe rear wheel positions (the safe position is 70 mm further back than the active). The backrest can be set to three angles - upright, middle & back with a total adjustment range of 8. The backrest can be set in two height positions high and low (the high position is 80 mm higher than the low position). The angle of the footrest can be set to suit the individual s user's needs. Footrest height The footrest can be adjusted to 11 different heights with a range of 120 mm. Footrest position The footrest can be adjusted to suit different sitting postures, i.e. legs 2 Product summary: Rough Terrain Wheelchair
vertical or tucked using forward and backward positions (65 mm difference). Sacral pad Seat depth Seat width The WM3 backrest comes with a height adjustable sacral pad. The seat base and the cushion can be adjusted to three different depths - 400, 440, 480 mm. Four different seat widths - 360, 400, 440, 480 mm. Performance specifications Armrests Backrest Box details Brakes Castor wheel Colour Cushion The chair is supplied with removable aluminium arm supports to facilitate pressure relief lifts, transfers and sitting in a rested position. The armrests also protect both the user and the sides of the cushion from mud and dirt. Posturally supportive solid backrest - lateral support, angular/height adjustment and adjustable lumbo-sacral pad. Polyurethane foam padding inside water resistant / fire retardant nylon upholstery. Plain brown five ply cardboard with black printed graphics. The packaging is not waterproof. Outside dimensions - 890 x 645 x 275 mm. Adjustable aluminium toggle brakes, with rubber grips. One rubber castor wheel, diameter 220 mm, width 60 mm. Black. Pressure relieving cushion (high quality contoured moulded polyurethane foam) inside water resistant / fire retardant nylon cover. Disposal Lifecycle The WM3 has been designed to be disassembled for reuse or recycling at the end of its serviceable life. If disposal is necessary please contact your local service provider first as they may be able to reuse parts of your wheelchair. The product is designed to provide at least 5 years of service, during normal use and providing it is appropriately maintained. Each user is supplied with a set of Allen keys and spanners, a puncture repair kit and a pneumatic tyre pump to assist with home maintenance. 3 Product summary: Rough Terrain Wheelchair
Push handles Pushrims Rear wheels Seat Standards Straps Transport / storage Tyres Weight Ergonomically positioned push handles with non-pvc grips provided. Diameter 19 mm chrome plated steel pushrims, attached in four places. 26" x 1 3/8" diameter rear wheels, with 36 spoke aluminium rims. Robust 36 spoke hub with two 6001zz bearings and diameter 12 mm axles. Varnished 12 mm plywood seat base (supplied with pressure relief cushion see Cushion ) The product conforms to the relevant sections of International Standards Organisation (ISO) standard ISO: 7176, including fire retardant foam and fabric and is ISO 9001 (2008-2013) and ISO 13845 (2008-2013) certified. Four straps are also supplied with the chair; two placed vertically either side of the legs, one calf strap and one set of foot straps. The product can be easily collapsible by users for stowing on public and private transport. The rear wheels and the armrests can be removed, and the backrest can be folded without requiring tools. Pneumatic - medium tread. Net weight of wheelchair only - 22 kg. Gross boxed weight - 25Kg. 4 Product summary: Rough Terrain Wheelchair
Product dimensions C A Front View B Side View Back View F D Top View E Folded View Approx Dimensions (in mm) A 740 B 752 C 865 D 1212 E 1190 F 472 5 Product summary: Rough Terrain Wheelchair
Motivation s Active Folding Wheelchair is a size adjustable, active, four wheel wheelchair for semi-urban environments. It is distributed through a network of Motivation s wheelchair service partners worldwide. Product Code WM4X 01 Active Folding Wheelchair Product Description Manufacture Semi-urban, size adjustable, active 4 wheel wheelchair Made in China under licence from Motivation Document Issue 11 Date of issue 17 June 2011 Overview The active folding wheelchair is an active style wheelchair allowing either self or attendant propulsion. It has been designed to suit the terrain found in semi-urban areas of developing countries. It utilises two medium sized castor wheels at the front and two bicycle wheels at the rear to negotiate uneven ground, whilst providing good manoeuvrability in an urban environment. The chair has been designed so that parts are easy to replace or repair and uses common wheel and bearing sizes. The chairs are individually assembled and fitted to each user by trained assemblers & prescribers. The active folding wheelchair and its packaging are designed for easy disassembly for recycling or reuse. Every wheelchair is supplied with a contoured pressure relieving cushion. Each cushion has a cover. Active Folding Wheelchair motivation 1
Product user group A B C The wheelchair can be used by people with a range of mobility disabilities. It is most suited to people living in a semi-urban areas. The chair is suitable for users whose body measurements fall within the following ranges: A. Hip width: 360 480 mm B. Buttock to back of knee: 390-470 1 mm C. Back of knee height from bttom of feet: 360 2 to 470 3 mm 1 - Backrest tension affects seat depth. 2 - possible by cutting 30mm off footrest tube. 3 - with 30mm ground clearance. Maximum user weight: 113kg (250lbs) Environment The wheelchair is designed for the harsh environmental conditions often found in semi-urban areas of developing countries. The wheelchair has good manoeuvrability both outdoors and inside buildings. The WM4X is stable and rides easily over uneven ground because of its larger front castor wheels and cambered rear wheels. The wheelchair performs well on uneven ground, but for extremely rough ground the Motivation Rough Terrain wheelchair is recommended. Adjustments Seat width Seat depth Back wheel (balance) position Backrest angle Backrest height Footrest height Footrest position 360, 400, 440, 480 mm 360 and 400 mm The WM4X can be prescribed in active and safe balance settings. The shape of the backrest can be altered by adjusting the tension of the backrest straps. The backrest can be set in two height positions high and low. The high back is 100mm higher than the low. The footrest can be adjusted to different heights. The footrest can be adjusted to two angles: 4 and 12 from horizontal. Active Folding Wheelchair motivation 2
Performance specifications Armrests Backrest Box details Brakes Castor wheels Colour Cushion Disposal Lifecycle Push handles Pushrings The chair is supplied with curved armrests to enable pressure relief lifts and transfers. The armrests also protect both the user and the sides of the cushion from dirt. Posturally supportive fabric backrest, with tensional adjustable straps. Water resistant nylon upholstery. Box dimensions: 650 X 650 X 400mm. Plain brown five ply cardboard with black printed graphics. The packaging is not waterproof. Adjustable toggle brakes, with rubber hand grips. Two 150mm (~6") rubber castor wheels, flat profile. Black. Pressure relieving cushion (contoured moulded polyurethane foam) with cover. WM4X cushion is shaped for use on sling seats. Not for use on WM3. The WM4X has been designed to be dissembled for reuse or recycling at the end of its serviceable life. If disposal is necessary please contact a local service provider first as they may be able to reuse parts of the wheelchair. The product is designed to provide 3-5 years of service, during normal use and providing it is appropriately maintained. Each user is supplied with a basic tool kit for home maintenance. Push handles with PVC grips. Diameter 19 mm chrome plated steel pushrings, attached in four places. Rear wheels 26" x 1 3/8" diameter rear wheels, with 40 spoke aluminium rims. Robust 40 spoke hub with two sealed bearings and diameter 12 mm high tensile axles. Interchangeable with WM3 (apart from axle). Seat Standards Straps Transport / storage Tyres Weight Slung fabric seat upholstery, with tension adjustable straps. Water resistant nylon upholstery supplied with pressure relief cushion. The product passes ISO: 7176-8 and is ISO 9001 (2008-2013) and ISO 13845 (2008-2013) certified. One calf strap is supplied with the chair. With the cushion removed, the product can be easily folded by users for storage or transportation. Pneumatic - medium tread with extra thick inner tubes. Current net weight of wheelchair approx: 23 kgs Active Folding Wheelchair motivation 3
Product dimensions A D C B E Approx Dimensions (in mm) of wheelchair in settings as shown (widest seat width) A 840 (low back) B 370 (active) C 760 (widest) D 960 (active) E 400 Active Folding Wheelchair motivation 4 Active Folding Wheelchair motivation 4
WHIRLWIND PRODUCT INFORMATION SHEET: ROUGHRIDER The award-winning RoughRider is designed to easily handle a wide range of terrain. The RoughRider is the only wheelchair in the world that combines a long wheelbase with a short overall length, providing both safety on rough ground and maneuverability in close quarters. Originally designed to withstand years of use in tough conditions throughout the developing world, the RoughRider is super-durable, providing independence and mobility both indoors and out, on pavement and off. Engineered for manufacture at the lowest possible cost without sacrificing the features that riders need to independently function in all types of settings. We believe in affordable technology that frees people to live life to the fullest even in rugged environments. You will be proud to be seen in your RoughRider, with its elegant design and sleek, graceful lines that harmonize with the human body. Watch the RoughRider in action here: whirlwindwheelchair.org/video-gallery WEBSITE www.whirlwindwheelchair.org PHONE 415.338.6277 EMAIL info@whirlwindwheelchair.org HEADQUARTERS San Francisco, California
ROUGHRIDER 2013 FEATURES 14 3 5 9 10 6 7 8 2 11 1 4 1 2 Long Wheelbase The long wheel base is 150% longer than standard wheelchairs. This provides outstanding stability and safety from forward tipping the number one cause of injury to wheelchair riders. WideFlex Casters Whirlwind's signature caster wheels were developed from an innovation we observed in Zimbabwe. They roll easily over grass, mud, rocks, and lightly packed sand. Solid flexible rubber wheels eliminate flats and absorb shocks. 7 8 9 Folding Frame Quick to stow in cars, buses, and other small spaces. Five Rear Axle Positions Allows for 80 mm of center-of-gravity adjustment for optimal balance and ease of pushing. Seat Angle Seat angle designed for comfort and safety on uneven surfaces and during sudden stops. 3 4 5 6 Tension Adjustable Back Ten individually adjustable straps provide optimal posture support for a broad range of users. Tight Turning Radius Allows the RoughRider to be used in tight spaces. High Traction Rear Tires Puncture-resistant, long wearing tires are perfect for off-road traveling. Super Duty Tough Frame Say good-bye to broken caster forks and frame failures. The RoughRider is tested to double the industry's standard for durability. 10 11 12 14 Readily Available Parts Tires, tubes, bearings, hardware, and wheel parts are easy to find and repair locally in bicycle shops, motorcycle shops, and hardware stores around the world. Toe-Protecting Foot Rest The tube in front of the foot design protects toes from getting injured. Sporty Wheel Camber 3 degrees of wheel tilt makes pushing easier and improves sideways stability. Washable Upholstery Seat back material is washable and the whole chair is friendly to hoses, river banks, and beaches. Seat Widths 12.5 (32cm) / 14 (35.5cm) / 15.5 (39.5cm) / 17 (43cm) / 18.5 (47cm) Back Heights 14 (35.5 cm), 16 (41 cm), 18 (46 cm); adjustable Seat Depth 14 (35.5cm)/16 (41cm)/18 (46cm); adjustable Overall Width 21.5 (55cm) - 28.5 (72cm) Front Caster Bearings Standard bicycle hub and bearing Overall Length 36 (91cm) - 39 (99cm) Front Wheel Camber 3 degrees Seat Angle 12 degrees Wheelbase (front to rear axle) 19 (48cm) - 22 (56cm) Seat Height 19 (48 cm) at front of seat Max Rider-Tested Weight 220 lb Rear Wheel Size 24 x 1.75 standard size; 1.5-2.125 wide tires available
: Motivation Active Rigid Frame (lightweight) wheelchair Ideal for active users, this stylish lightweight and adjustable rigid wheelchair reflects the dynamic lifestyle of urban living. Active Rigid Frame (lightweight) Wheelchair Product Code Product Description Manufacture L801MV Urban, rigid, active 4 wheel wheelchair Made in China under licence from Motivation Document Issue 1 Date of issue 17 June 2015 Overview The Active Rigid Frame (lightweight) wheelchair is an active style wheelchair allowing either self or attendant propulsion. It has been designed to suit the terrain found in more urban areas. It utilises two small sized castor wheels at the front and two 24 wheels at the rear to negotiate small spaces, and provide excellent manoeuvrability in an urban environment. The aluminium frame makes it lightweight and it has quick-release castor wheels, rear wheels, and a backrest folding mechanism allowing fast disassembly for quick and easy transportation. The chair requires minimal assembly and can be fitted to each user by trained assemblers & prescribers. Its packaging is designed for easy disassembly for recycling or reuse. Every wheelchair is supplied with a contoured pressure relieving cushion. Each cushion has a water resistant cover. Product summary: Active Rigid Frame (lightweight) wheelchair) 1
Product user group A B C The wheelchair can be used by people with a range of mobility disabilities. It is most suited to people living in a semi-urban areas. The chair is suitable for users whose body measurements fall within the following ranges: A. Hip width: 406 559 mm B. Buttock to back of knee: 400-530 1 mm C. Back of knee height from bottom of feet: 360 to 470 mm 1 - Backrest tension affects seat depth. Maximum user weight: 113 kg (250 lbs) Environment The wheelchair is designed for use in urban areas. The wheelchair has good manoeuvrability both outdoors and inside buildings. Adjustments Seat width Seat angle Seat length Back wheel (balance) position Backrest angle 16 (406 mm), 18 (457 mm), 20 (508 mm), 22 (559 mm) The seat comes as standard with a 10 degree tilt (from horizontal). 18 (457 mm) as standard. Can be adjusted to 16 (406 mm) and 14.5 (368 mm). Cushion can be cut to length as required. A choice of active and safe rear wheel positions. 9 positions forward/back over a 95 mm range, measured from 15 mm to 110 mm in front of backrest. 2 height options for axle mount, 35 mm apart. The seat to backrest angle can be adjusted to five settings with a total angle range from 90 to 115. The shape of the backrest can be altered by adjusting the tension of the five backrest straps. Product summary: Active Rigid Frame (lightweight) wheelchair) 2
Backrest height Footrest height Footrest position Rear wheel guard height Rear wheel guard forward/back Brake position Rear wheel camber Castor barrel forward/back Castor barrel angle Castor wheel height Pushring width position The backrest can be set in three height positions high, medium and low. Measured from the seat, the full range of height is 315 mm to 415 mm. The footrest can be adjusted to different heights. 5 height settings with a total height range of 70 mm. The footrest can be placed in a forward or backward configuration. The guard has eight height options providing a total height range of 205 mm to 270 mm, as measured from seat to top of armrest 20 mm forward from neutral position and 20 mm back from neutral position Adjustable forward/back position, to accommodate the rear wheel position and for fine adjustment to set on/off force. Camber can be adjusted to 0, 2.5 and 5 from vertical. The castor barrel has 3 possible forward/back positions which are 25 mm apart. The castor barrel has 12 of adjustment. The castor wheel can be positioned 20 mm higher and 30 mm higher from the original position. The pushring can be positioned 10 mm further out from the wheel rim. Performance specifications Backrest Box details Brakes Castor wheels Colour Cushion Posturally supportive padded fabric backrest, with tensional adjustable straps. Water resistant nylon upholstery. Box dimensions: 650 X 650 X 400mm. Plain brown five ply cardboard with black printed graphics. The packaging is not waterproof. Adjustable toggle brakes, with rubber hand grips. Two 76 mm (3") Diameter PU castor wheels, half-round profile. Castor wheel and fork have quick release push-button system for ease of transport. Silver Pressure relieving cushion (contoured moulded polyurethane foam) Product summary: Active Rigid Frame (lightweight) wheelchair) 3
with cover. Disposal Lifecycle Pushrings Rear wheels Seat Standards Straps Transport / storage Tyres Weight Overall dimensions Can be disassembled for reuse or recycling at the end of its serviceable life. If disposal is necessary please contact a local service provider first as they may be able to reuse parts of the wheelchair. The product is designed to provide 3-5 years of service, during normal use and providing it is appropriately maintained. Each user is supplied with a basic tool kit for home maintenance. Diameter 19 mm powder coated steel pushrings, attached in four places. Quick release, 24" x 1" diameter rear wheels, with 36 radially spoked aluminium rims. Robust 36 spoke hub with two sealed bearings and diameter 12 mm high tensile push-button quick release axles. Slung fabric seat upholstery. Water resistant nylon fabric supplied with pressure relief cushion. The product passes ISO: 7176-8 and is ISO 9001 (2008-2013) and ISO 13845 (2008-2013) certified. One calf strap is supplied with the chair. The backrest can be easily folded with a quick-folding mechanism, the rear and castor wheels are both quick release, and the wheel guards are easily removed allowing rapid disassembly for storage or transportation. Pneumatic - medium tread. Current net weight of wheelchair approximately 14.5 kgs. 860 mm x 735 mm x 830 mm (for 18 size frame) Product summary: Active Rigid Frame (lightweight) wheelchair) 4
The Clip-on Tricycle Attachment is a quick release clip-on, clip-off attachment which can be fitted to the Motivation Rough Terrain (WM3) wheelchair. It converts the wheelchair into a tricycle allowing the user to travel greater distances more effectively. Clip-on Tricycle Attachment Product Code Product Description Manufacture WM3TRCO-01 Clip-on tricycle attachment for WM3 wheelchair Made in India and China under license from Motivation Document Issue 6 Date of issue 17 June 2011 Overview The Clip-on Tricycle Attachment is an active style hand powered drive allowing the user to quickly convert the WM3 wheelchair into a tricycle. It consists of a tubular mild steel frame, with standard bicycle components and stainless steel fasteners. It has a single 20 pneumatic wheel at the front, parking brakes and running brake, a stand and inline pedal cranks for propelling by hand. It helps the user to travel greater distances with less effort. Fitted to a WM3 wheelchair the user also gets all the same benefits featured on the wheelchair such as postural support and pressure relief. The tricycle drive has been designed so that parts are easy to replace or repair and uses many standard bicycle parts. One boxed flat-pack tricycle drive kit can be adjusted to suit most riders. The tricycle drives are individually assembled and fitted to each user by trained staff. The packaging is designed for easy disassembly for recycling or reuse. The tricycle drive, together with the wheelchair, is easy to carry on most forms of transport. Photo of WM3 and tricycle before attachment in place Photo of WM3 and tricycle after attachment in place Clip-on Tricycle motivation 1
Product user group A B C The tricycle drive can be used by people with a range of mobility disabilities. It is most suited to people who are already active in their wheelchair. The tricycle drive and wheelchair is suitable for users whose body measurements fall within the following ranges: A. Hip width: 360 480 mm B. Buttock to back of knee: 430-540 mm C. Back of knee height from bottom of feet: 310 430 mm D. Backrest to center of fist on outstretched arm 680-750mm in safe position 750-820 in active position. Maximum user weight: 100kg (220lbs) Environment The Clip-on Tricycle Attachment is designed for use over rough ground and most environments where a standard single speed bicycle would reasonably be expected to travel. The Clip-on can also be used in urban and semi-urban areas which often have similar road conditions and obstacles to rural areas. It is stable and rides easily over rough ground because it has a long wheelbase, 20 front wheel and cambered rear wheels. Users may still require assistance over extremely rough ground, high curbs or steep inclines. Although the Clip- on Tricycle Attachment is primarily for outdoor use it can be used indoors. Users may experience some limitations in confined spaces because of its long wheelbase. Clip-on drive adjustments Pedal position The pedal position can be adjusted horizontally by approx 50mm but is limited by the castor. Vertical adjustment is fixed and is designed to suit most users Performance specifications Box details Brakes Chain Chain guard Frame colour Gears Plain brown five ply cardboard with black printed graphics. The packaging is not waterproof. Outside dimensions - 1325 x 195 x 550 (L x W x H). V brake on the front wheel. Standard WM3 parking brakes on the rear wheels. A standard bicycle chain is supplied. Chain tension is adjustable. A chain guard is fitted as standard to protect the user from the chain Black. The clip-on attachment comes with simple single speed freewheel gear to suit most users. Clip-on Tricycle motivation 2
Lifecycle Wheels Standards Finish Transport / storage Tyres Weight The product is designed to provide at least 5 years of service, during normal use and providing it is appropriately maintained. 20 x 1.75 front wheel with 28 hole steel rim. The wheelchair conforms to the relevant sections of International Standards Organisation (ISO) standard ISO:7176, including fire retardant foam and fabric. This product is also ISO 9001 (2008-2013) and ISO 13845 (2008-2013) certified. Frame components are either galvanised or enamel painted. The standard bicycle components have various finishes The product is easily collapsible for stowing on public and private transport. The rear wheels, drive and the armrests can be removed, and the backrest can be folded without requiring tools. Pneumatic - medium tread. Net weight of the clip-on drive is 13kg. Gross boxed weight is 16kg Clip-on Tricycle motivation 3
Product dimensions WM3TRCO-01 Clip- on Tricycle Attachment Clip-on Tricycle motivation 4
Product dimensions Clip- on Tricycle Attachment mounted on WM3-01, Rural Wheelchair Clip-on Tricycle motivation 5
The Motivation Dedicated Tricycle is hand powered. Built on the platform of the WM3 wheelchair it provides some postural support to the user. It has a height adjustable footrest, pedals and backrest so that the user can have an optimal riding position and maximum comfort. It has a basic cushion, sculpted backrest and comes with a built in rear carrier. Motivation Dedicated Tricycle Product Code Product Description Manufacture WM3TR-01 Hand powered dedicated tricycle Made China under license from Motivation Document Issue 7 Date of issue 17 June 2011 Overview The Motivation Dedicated Tricycle is a flat-packed active style hand powered tricycle based on the WM3 wheelchair platform. It consists of a tubular mild steel frame, with standard bicycle components. It has a single 20 pneumatic wheel at the front, parking brakes and running brake and inline pedal cranks for propelling by hand. It helps the user to travel greater distances with less effort. The user also gets some of same benefits featured on the WM3 wheelchair such as postural support and adjustable footrest. The tricycle has been designed so that it is easy to maintain or repair and uses many standard bicycle parts. One boxed flat-pack tricycle kit can be adjusted to suit most riders. The tricycle is individually assembled and fitted to each user by trained staff. The packaging is designed for easy disassembly for recycling or reuse. Motivation Tricycle motivation 1
Product user group A B C The tricycle can be used by people with a range of mobility disabilities. It is most suited to people who have sensation. In general it is not recommended for people with a spinal cord injury. The tricycle is suitable for users whose body measurements fall within the following ranges: A. Hip width: up to 470 mm B. Buttock to back of knee: 430-540 mm C. Back of knee height from bottom of feet: 310 430 mm D. Backrest to center of fist on outstretched arm 680-750mm normal range but can vary outside this range Maximum user weight: 100kg (220lbs) Environment The tricycle is designed for use over rough ground and most environments where a standard single speed bicycle would reasonably be expected to travel. The tricycle can also be used successfully in urban and semi-urban areas which often have similar road conditions and obstacles to rural areas. The tricycle is stable and rides easily over rough ground because it has a long wheelbase, 20 front wheel and cambered rear wheels. Users may still require assistance over extremely rough ground, high curbs or steep inclines. Although the tricycle is primarily for outdoor use it can be used indoors. Users may experience some limitations in confined spaces because of its long wheelbase. Clip-on drive adjustments Seat width Seat depth Backrest angle Backrest height Footrest height Footrest position Footrest angle Pedal position 470mm 400mm The backrest can be set to three angles - upright, middle & back with a total adjustment range of 8. Adjustable: 425mm (low backrest), 500mm (high backrest). The footrest can be adjusted to 11 different heights with a range of 120 mm. The footrest can be adjusted to suit different sitting postures, i.e. legs vertical or tucked using forward and backward positions (65 mm difference). The angle of the footrest can be set to suit the individual s user's needs. The pedal position can be adjusted horizontally along the main beam. Motivation Tricycle motivation 2
Sacral pad The backrest comes with a height adjustable sacral pad. Performance specifications Armrests Backrest Box details Brakes Chain Chain guard Frame colour Gears The chair is supplied with removable aluminium arm supports to facilitate pressure relief lifts, transfers and sitting in a rested position. The armrests also protect both the user and the sides of the cushion from mud. Posturally supportive solid backrest - lateral support, angular/height adjustment and adjustable lumbo-sacral pad. Polyurethane foam padding inside water resistant / fire retardant nylon upholstery. Plain brown five ply cardboard with black printed graphics. The packaging is not waterproof. Outside dimensions - 1325 x 195 x 550 (L x W x H) V brake A standard bicycle chain is supplied. Chain tension is adjustable. A chain guard is fitted as standard to protect the user from the chain. Black. The clip-on attachment comes with simple single speed freewheel gear to suit most users. Cushion Simplified 70 mm thick polyurethane foam padding inside a water resistant / fire retardant nylon cover. Lifecycle Push rims The product is designed to provide at least 5 years of service, during normal use and providing it is appropriately maintained. Each user is supplied with an Allen key for home maintenance. Standard WM3 push rims. Wheels 26" x 1 3/8" diameter rear wheels, with 40 spoke aluminium rims. Robust 40 spoke hub with two 6202 2RS bearings and diameter 12 mm axles. 20 x 1.75 front wheel with 28 hole steel rim. Seat Standards Finish Transport / storage Tyres Weight Varnished 12 mm plywood seat base (supplied with simplified cushion see Cushion ). This product is ISO 9001 (2008-2013) and ISO 13845 (2008-2013) certified. Frame components are enamel painted. Standard bicycle components have various finishes. The rear wheels and the armrests can be removed. For infrequent transportation the backrest and the drive can be removed with tools. Pneumatic - medium tread. Net weight of the tricycle is 24kg. Gross boxed weight is 29kg (in two separate boxes). Motivation Tricycle motivation 3
Product dimensions WM3TRDR-01, Dedicated Tricycle Drive Motivation Tricycle motivation 4
Product dimensions WM3TRCH-01, Dedicated Tricycle Chassis Motivation Tricycle motivation 5
Product dimensions WM3TR-01, Complete Dedicated Tricycle Motivation Tricycle motivation 6