Security creates trust Fire protection, burglar and bullet resistance systems in steel and stainless steel

Security creates trust Fire protection, burglar and bullet resistance systems in steel and stainless steel

2 Schüco steel systems Jansen

Schüco steel systems Jansen 3 Content Fire-resistant façades 4 Fire-resistant façades VISS Fire 6 Fire protection systems Jansen-Economy 50 Jansen-Economy 60 8 Fire protection system Janisol 2 11 Fire protection system Janisol 3 Fire protection systems 12 Burglar resistance 15 Bullet resistance 16 VISS façades with the CE mark 17 CWCT test Burglar resistance 18 One look for all systems 19 System overview Bullet resistance Da la Warr Pavillion, Bexhill/GB

4 Schüco steel systems Jansen VISS Fire Fire-resistant façades Fire protection is a very sensitive area. Schüco steel systems Jansen have developed VISS Fire a modular, fully insulated façade construction for universal use. The VISS Fire systems are now fully approved for all Philharmonic Concert Hall, Essen/DE VISS Fire (slope) security classes of integrity and insulation up to 120 minutes both as curtain walling and as a partition wall system. Skylights allow integrity and insulation up to 60 minutes in the fire resistance class. The mullion/transom construction with a slender face width of 50 mm also provides a number of design options. Basic depths from 50 to 140 mm allow a wide range of structural solutions for the design of façade units over more than one storey, up to 5000 mm high and with unlimited width. The many alternatives give the designer the necessary freedom to create attractive large areas of glazing. All standard profiles, design variations and the Personal Profiles are available. The installation of single and double-leaf Janisol 2 and Janisol 3 doors allows an identical look for different sections of a building with different applications. Features and benefits: Approval for all fire resistance classes with fire-resistant façades with integrity and insulation up to 120 minutes Approved as curtain walls and internal partition walls Installation of single and double-leaf Janisol 2 and Janisol 3 doors Janisol 2 and Janisol 3 maintenance cover can be integrated Connection of Schüco SunControl solar shading blades Slim profile face width of 50 mm Wide selection of approved fire-resistant glazing Assessment Insulation Integrity Glass type Producer Angle range of screen Height x max. no. from horizontal Width mm Area m 2 CC 223495 0 30 Pyran ISO Schott 30 to 60 2642 x 1746 3.84 (5, 6 or 8 mm Pyran S - 8 mm - 8 mm float)* 0 30 Pyran ISO Schott 0 to 30 2640 x 1500 3.30 (5, 6 or 8 mm Pyran S - 8 mm - 8 mm float)* 0 30 Pyroswiss Kombi Vetrotech 45 only 2102 x 972 2.04 (10 mm Pyroswiss SS - 12 mm - 8 mm float)* 0 30 Pyroswiss Kombi Vetrotech 45 to 79 2102 x 972 2.04 (6 mm Pyroswiss WS - 14/16 mm - 8 mm float)* 0 30 Pyroswiss Kombi Vetrotech 0 to 45 2352 x 1152 2.26 (6 mm Pyroswiss WS - 14/16 mm - 8 mm float)* 0 30 Pyroswiss Kombi Vetrotech 45 to 79 2102 x 972 2.04 (6 mm Pyroswiss WS - 12 mm - 11 mm float)* 0 30 Pyroswiss Kombi Vetrotech 0 to 45 2352 x 1152 2.26 (6 mm Pyroswiss WS - 12 mm - 11 mm float)* 30 30 Pyrostop 30-401 Pilkington 30 to 60 2400 x 1202 2.40 (24 mm Pyrostop 30-50 - 12 mm - 8 mm toughened) 30 30 Pyrostop 30-401 Pilkington 0 to 30 1759 x 1202 1.76 (24 mm Pyrostop 30-50 - 12 mm - 8 mm toughened) 30 30 Contraflam N2 Vetrotech 45 only 2502 x 1102 2.76 (16 mm - 20 mm - 6 mm float) 30 30 Contraflam N2 Vetrotech 0 to 45 1127 x 1102 1.24 (16 mm - 20 mm - 6 mm float) 30 30 Pyrodur 30-401 Pilkington 35 to 90 1284 x 1260 1.35 (20 mm Pyrodur 30-50 - 12 mm - 8 mm float) 30 30 Pyrodur 30-401 Pilkington 5 to 35 2400 x 1260 2.52 (20 mm Pyrodur 30-50 - 12 mm - 8 mm float) 30 60 Pyrostop 20 mm Pilkington 0 to 15 1200 x 1200 1.20 laminated to 6 mm amourplate glass 60 60 Contraflam N2 Vetrotech 0 to 25 2404 x 857 1.72 (23 mm - 12 mm - 6 mm float) * Fire glass to non-fire side only Inside application (wet or dry glazed) Outside application (dry glazed)

Schüco steel systems Jansen 5 VISS Fire (vertical) Assessment Insulation Integrity Glass type Producer Height x Width max. no. mm Area m 2 CC 88368 0 30 Pyroswiss, 6 mm Vetrotech 2000 x 1200 2.40 0 30 Fireswiss, 6 mm Glas Trösch 2000 x 1200 2.40 0 30 Pyroguard C, 7.2 mm CGI Int. 1200 x 1200 1.44 0 30 Georgian wired, 6.5 mm CGI Int. 2000 x 1200 2.40 0 30 Pyrodur 30-20, 10 mm Pilkington 2000 x 1200 2.40 0 30 Pyran S, 6 mm Schott 2875 x 1600 4.60 0 30 Pyran ISO (6 to 8 Pyran S - 8 to 20-4 to 10)* Schott 1600 x 3000 4.80 0 30 Pyran ISO (6 to 8 Pyran S - 8 to 20-4 to 10)* Schott 3000 x 1600 4.80 0 30 Vetroflam, 22 mm (6-10 - 6) Vetrotech 1800 x 1300 2.34 0 60 Pyroswiss Plus, 6 mm Vetrotech 2000 x 1200 2.40 0 60 Pyroswiss Extra, 6 mm Vetrotech 2270 x 1320 3.00 0 60 Vetroflam, 6 mm Vetrotech 1996 x 1109 2.21 0 60 Fireswiss, 6 mm Glas Trösch 1450 x 1100 1.59 0 60 Pyroguard W (wired), 7.2 mm CGI Int. 1442 x 995 1.16 0 60 Georgian wired, 6.5 mm CGI Int. 1500 x 1000 1.50 0 60 Pyrocet, 6 mm C3S Securiglass 2000 x 1200 2.40 0 60 Pyrodur 60-20, 13 mm Pilkington 2000 x 1200 2.40 0 60 Pyran S, 6 mm Schott 2875 x 1400 3.86 0 60 Pyran ISO (6 to 8 Pyran S - 8 to 20-4 to 10)* Schott 1600 x 2750 4.40 0 60 Pyran ISO (6 to 8 Pyran S - 8 to 20-4 to 10)* Schott 2750 x 1600 4.40 0 90 Pyran ISO (6 to 8 Pyran S - 8 to 20-4 to 10)* Schott 2500 x 1500 3.75 0 120 Pyran ISO (6 to 8 Pyran S - 8 to 20-4 to 10)* Schott 2300 x 1250 2.80 CC 204234A 30 30 Pyrostop 30-10, 15 mm Pilkington 3000 x 1440 3.74 30 30 Pyrostop 30-10, 15 mm + laminated Pilkington 3000 x 1440 3.74 30 30 Pyrostop 30-20, 18 mm + other Pilkington 3000 x 1440 3.74 30 30 Pyrostop 30-20, 18 mm Pilkington 3000 x 1440 3.74 30 30 Pyrobel, 12 mm Glaverbel 2000 x 850 1.70 30 30 Pyrobel DGU (12-13 - 6.8) Glaverbel 2820 x 1473 3.47 30 60 Pyrobel, 21 mm Glaverbel 2300 x 1200 2.76 30 60 Pyrobel, 17 mm Glaverbel 2700 x 1400 3.78 30 60 Pyrobel ISO, 16 mm Glaverbel 2214 x 750 1.66 30 60 Pyrobel, 14 mm Glaverbel 2000 x 1300 2.60 30 60 Swissflam, 24 mm Vetrotech 2000 x 1200 2.40 30 60 Swissflam, 15 mm Vetrotech 2300 x 1300 2.99 30 60 Contraflam 30/N2, 16 mm Vetrotech 2300 x 1200 2.76 30 60 Promaglas, 17 mm Promat 2300 x 1300 2.99 60 60 Contraflam 60/N2, 24 mm Vetrotech 2200 x 1200 2.64 60 60 Contraflam 60/N2, 24 mm Vetrotech 575 x 2100 1.21 60 60 Contraflam 60/N2 ISO (24-8 - 5) Vetrotech 2200 x 1691 2.86 60 60 Contraflam 60/N2, 29 mm Vetrotech 3120 x 2160 5.62 60 60 Contraflam 60/N2 ISO (29-9 - 6) Vetrotech 3120 x 2160 5.62 60 60 Swissflam 60/N2, 45 mm Vetrotech 1824 x 3456 5.25 60 60 Pyrobel, 21 mm Glaverbel 2300 x 1200 2.76 60 60 Swissflam, 24 mm Vertrotech 2000 x 1200 2.40 60 60 Pyrostop 60-101, 23 mm Pilkington 3000 x 1794 5.20 60 60 Pyrostop 60-101 IGU, 23 mm + lamineted Pilkington 3000 x 1794 5.20 60 60 Pyrostop 60-201 IGU, 27 mm + other Pilkington 3000 x 1794 5.20 90 90 Pyrobel, 35 mm Glaverbel 2640 x 1200 2.64 90 90 Contraflam 90/N2, 38 mm Vetrotech 2946 x 1746 4.29 90 90 Contraflam 90/N2, 40 mm Vetrotech 1442 x 2882 3.46 90 90 Contraflam 90/N2, 40 mm Vetrotech 1994 x 1430 2.38 90 90 Pyrostop 90-261, 54 mm Pilkington 1680 x 2760 3.86 90 90 Pyrostop 90-261, 54 mm Pilkington 2760 x 1680 3.86 90 90 Pyrostop 120-104, 52 mm (23-6 - 23) Pilkington 2880 x 1698 4.08 120 120 Pyrobel, 52 mm Glaverbel 1320 x 2640 2.90 120 120 Pyrobel, 52 mm Glaverbel 1956 x 1284 2.09 120 120 Contraflam 120/N2, 58 mm Vetrotech 2590 x 1442 3.73 120 120 Contraflam 120/N2, 62 mm Vetrotech 2760 x 1560 3.59 120 120 Contraflam 120/N2, 74 mm Vetrotech 2760 x 1824 4.20 120 120 Pyrostop 120-104, 52 mm (23-6 - 23) Pilkington 2400 x 1415 3.39 Dry glazing Wet glazing Inside application Outside application (DGU) * Fire glass to non-fire side only, secondary glass may be float, laminated or toughened

6 Schüco steel systems Jansen Jansen-Economy Fire protection systems Smoke/fire doors and closers are designed to prevent the spread of fire and smoke. Jansen-Economy 50 and Jansen- Economy 60 allow transparent building components to be manufactured economically as single or double-leaf doors, with side lights and/or toplights or as a partition wall. The profile system enables the fabrication of flush-fitted doors with continuous shadow joint inside and outside. In the event of fire, a low flammability double rebate gasket guarantees a secure closure. The tailored range of fittings includes locks, strike plates, electric strikes, door handles and specially developed 3D weld-on hinges. Secondary school, Bregenz/AT The appearance is co-ordinated to match that of the other Jansen door systems. This means different requirements can be met whilst retaining a uniform appearance. Jansen-Economy 60 «The BritOval» Surrey County Cricket Club, London/GB Summary of types for doors and double acting doors

Schüco steel systems Jansen 7 Jansen-Economy 50 / Jansen-Economy 60 Element Assessment Integrity Glass type Producer Height x Width (mm) max. type no. Clear opening size Area m 2 Screens CC 88051 30 Pyroswiss, 6 mm Vetrotech 2000 x 1400 2.80 and Jansen-Economy 50 30 Pyroswiss ISO, ISO WS Vetrotech 2250 x 1220 2.74 Doors CC 213213 30 Pyroswiss ISO, ISO WS Vetrotech 1220 x 2250 3.74 Jansen-Economy 60 30 Fireswiss, 6 mm Glas Trösch 2000 x 1250 2.50 30 Pyroguard C, 7.2 mm and 11 mm CGI Int. 1200 x 1200 1.44 30 Georgian wired, 6.5 mm CGI Int. 2000 x 1400 2.80 30 Pyran S, 6 mm Schott 2875 x 1600 4.60 30 Pyran ISO (6 to 8 Pyran S - 8 to 20-4 to 10)* Schott 1600 x 3000 4.80 30 Pyran ISO (6 to 8 Pyran S - 8 to 20-4 to 10)* Schott 3000 x 1600 4.80 30 Pyrocet, 6 mm C3S Securiglass 2875 x 1400 3.86 30 Pyrodur, 10 mm Pilkington 2000 x 1400 2.80 60 Pyran S, 6 mm Schott 2875 x 1400 3.86 60 Pyran ISO (6 to 8 Pyran S - 8 to 20-4 to 10)* Schott 1600 x 2750 4.40 60 Pyran ISO (6 to 8 Pyran S - 8 to 20-4 to 10)* Schott 2750 x 1600 4.40 60 Pyroswiss Plus, 6 mm Vetrotech 2000 x 1250 2.50 60 Pyroswiss Extra, 6 mm Vetrotech 2270 x 1320 3.00 60 Pyroguard W (wired), 7.2 mm CGI Int. 1442 x 995 1.16 60 Georgian wired, 6.5 mm CGI Int. 1500 x 1000 1.50 60 Pyrocet, 6 mm C3S Securiglass 2558 x 1260 3.45 60 Vetroflam, 6 mm Vetrotech 1996 x 1109 2.21 60 Swissflam-lite, 7 mm or 9 mm Vetrotech 1820 x 1250 2.27 60 Pyrobel, 14 mm Glaverbel 2000 x 1300 2.60 60 Pyrobel, 21 mm Glaverbel 792 x 1196 0.86 90 Pyran ISO (6 to 8 Pyran S - 8 to 20-4 to 10)* Schott 2500 x 1500 3.75 120 Pyran ISO (6 to 8 Pyran S - 8 to 20-4 to 10)* Schott 2300 x 1250 2.80 120 Pyran S, 6 mm Schott 2300 x 1400 3.22 120 Firelite, 5 mm TGP 2400 x 880 2.10 Element Assessment Integrity Glass type Producer Height x Width (mm) max. type no. Permitted size Area m 2 Screens CC 88051 30 all above 0/30 all above 0/30 Jansen-Economy 50 60 all above 0/60 all above 0/60 CC 213213 90 all above 0/90 all above 0/90 Jansen-Economy 60 120 all above 0/120 all above 0/120 max. unsupported height 4000 mm, width unlimited Element Assessment Integrity Requirements Glass type Height x Width (mm) max. type no. min. Clear opening size Area m 2 Single CC 88051 30 all above 0/30 2878 x 1403 3.66 leaf Jansen-Economy 50 30 Min. one transom all above 0/30 3000 x 1400 4.20 doors CC 213213 30 2-point latch all above 0/30 3000 x 1500 4.50 Jansen-Economy 60 30 One transom and 2-point latch all above 0/30 3000 x 1610 4.83 60 all above 0/60 2250 x 1219 2.74 60 all above 0/60 2524 x 1036 3.74 Element Assessment Integrity Requirements Glass type Height x Width (mm) max. type no. min. Clear opening size Area m 2 Double CC 88051 30 all above 0/30 2547 x 2830 7.20 leaf Jansen-Economy 50 30 One transom all above 0/30 2860 x 2830 8.09 doors CC 213213 60 all above 0/60 2547 x 2385 5.50 Jansen-Economy 60 60 One transom all above 0/60 2611 x 2639 6.25 Inside application Outside application Jansen-Economy 50 Double acting doors Element Assessment Integrity Glass type Producer Height x Width (mm) max. Single CC 236507 30 Pyran S, 6 mm Pilkington 2231 x 904 1.98 type no. Clear opening size Area m 2 leaf Jansen-Economy 50 30 Pyrodur, 7.5 mm Pilkington 2231 x 904 1.98 doors 45 Contraflam lite, 14 mm Vetrotech 2231 x 904 1.98 Double CC 236507 30 Pyran S, 6 mm Pilkington 2231 x 1807 1.98 leaf Jansen-Economy 50 30 Pyrodur, 7.5 mm Pilkington 2231 x 1807 1.98 doors 45 Contraflam lite, 14 mm Vetrotech 2231 x 1807 1.98 * Fire glass to non-fire side only, secondary glass may be float, laminated or toughened Please refer to current sales documentation and technical recommandation of system supplier as well as current assessements for size and fabrication.

8 Schüco steel systems Jansen Janisol 2 Fire protection system A thermally broken profile system for flush-fitted, single and double-leaf doors, and doors in glass walls. The basic depth for door frames and door leaves is just 60 mm. Profiles with face widths of 25 mm and 50 mm can be used for mullions and transoms. A continuous shadow joint inside and outside lends the construction a certain lightness and elegance with extremely narrow profile face widths. Different brands of fireresistant glass can be used as infill panels. A comprehensive range of fully tested fittings, locks, accessories and integrated door closers (ITS 96) is also available. These can be incorporated easily into the hollow profile section. The appearance is co-ordinated to match that of all the other Jansen door systems. Janisol 2 has numerous approval variants. It is constantly being improved with input from users, and the approvals are continually updated. Please check approval status for individual projects with our technical consultancy service. Janisol 2 doors have been approved as burglar-resistant doors in accordance with ENV 1627 and classified as security class 3. Janisol 2 Office complex element, Dornbirn/AT

Schüco steel systems Jansen 9 Janisol 2 Element Assessment Insulation Integrity Glass type Producer Height x Width max. type no. mm Area m 2 Doors CC 88366 0 30 Pyroswiss Vetrotech 2000 x 1200 2.40 and 0 30 Fireswiss Glas Trösch 2000 x 1200 2.40 screens 0 30 Pyroguard C, 7.2 mm CGI Int. 1200 x 1200 1.44 0 30 Georgian wired CGI Int. 2000 x 1200 2.40 0 30 Pyran S Schott 2875 x 1600 4.60 0 30 Pyrodur, 10 mm Pilkington 2000 x 1200 2.40 0 60 Pyroswiss Plus Vetrotech 2000 x 1200 2.40 0 60 Fireswiss Glas Trösch 1450 x 1100 1.59 0 60 Pyroguard W (wired), 7.2 mm CGI Int. 1442 x 995 1.16 0 60 Georgian wired CGI Int. 1500 x 1000 1.50 0 60 Pyran S Schott 2875 x 1400 3.86 0 60 Pyrocet C3S Securiglass 2000 x 1200 2.40 0 60 Pyrodur, 13 mm Pilkington 2000 x 1200 2.40 0 60 Vetroflam, 6 mm Vetrotech 1996 x 1109 2.21 0 60 Vetroflam (6 mm - 10-6 mm toughened) Vetrotech 2329 x 3288 5.42 30 30 Swissflam 30/1, 15 mm Vetrotech 2200 x 1400 3.08 30 30 Swissflam 30/1 ISO Vetrotech 2200 x 1250 3.08 30 30 Swissflam 30/1, 15 mm Vetrotech 1250 x 2200 2.75 30 30 Swissflam 30/1 ISO Vetrotech 1250 x 2200 2.75 30 30 Pyrostop 30-10/12, 15/17 mm Pilkington 2200 x 1400 3.08 30 30 Pyrostop 30-10/12, 15/17 mm Pilkington 1250 x 2200 2.74 30 30 Pyrostop 30-20, 18 mm Pilkington 3000 x 1250 3.75 30 30 Pyrostop 30-20, 18 mm Pilkington 1250 x 2200 2.75 30 30 Pyrostop 30-25/35 and 26/36, 32/36 mm Pilkington 2200 x 1250 2.75 30 30 Pyrostop 30-25/35 and 26/36, 32/36 mm Pilkington 1250 x 2200 2.75 30 30 Pyranova 30-S1, 16.5 mm Schott 2200 x 1250 2.75 30 30 Pyranova 30-S1, 16.5 mm Schott 1250 x 2200 2.75 30 30 Pyrobel, 14 mm Glaverbel 2000 x 1300 2.60 30 30 Contraflam 30-15, 25 mm Vetrotech 2000 x 1400 2.80 30 30 Contraflam 30-15, 25 mm Vetrotech 2200 x 1250 2.80 30 30 Contraflam 30-15, 25 mm Vetrotech 1250 x 2200 2.80 30 30 Contraflam 30/N2 16 mm Vetrotech 3000 x 1250 3.75 30 30 Contraflam 30/N2 ISO Vetrotech 3000 x 1250 3.75 30 30 Contraflam 30/N2 >16 mm Vetrotech 1250 x 2200 2.75 30 30 Contraflam 30/N2 ISO Vetrotech 1250 x 2200 2.75 30 30 Promaglas 30, type 1,3 and 5, 17 mm Promat 2200 x 1250 2.75 30 30 Promaglas 30, type 1,3 and 5, 17 mm Promat 1250 x 2200 2.75 30 30 Pyrobel, 12 mm Glaverbel 2200 x 1200 2.64 30 60 Pyrobel ISO, 16 mm Glaverbel 2214 x 750 1.66 30 60 Swissflam 30/1, 15 mm Vetrotech 2200 x 1400 3.08 30 60 Swissflam 30/1 ISO Vetrotech 2200 x 1250 3.08 30 60 Pyrostop 30-10/12, 15/17 mm Pilkington 2200 x 1400 3.08 30 60 Pyrobel, 14 mm Glaverbel 2000 x 1300 2.60 Element Assessment Insulation Integrity Glass type Producer Height x Width mm max. type no. Permitted size Area m 2 Screens CC 88366 0 30 all above 0/30 all above 0/30 0 30 all above 0/30 all above 0/30 0 60 all above 0/60 all above 0/60 30 30 all above 30/30 all above 30/30 30 30 all above 30/30 all above 30/30 30 60 all above 30/60 all above 30/60 Single CC 88366 30 30 2-point latch all above 30/30 leaf 30 30 Single-pont latch all above 30/30 doors 30 60 2-point latch all above 30/60 Double CC 88366 30 30 2-point latch all above 30/30 leaf 30 30 Single-point latch all above 30/30 doors 30 60 2-point latch all above 30/60 max. unsupported height 4000 mm, width unlimited Element Assessment Insulation Integrity Requirements Glass type Height x Width mm max. type no. Clear opening size Area m 2 max. unsupported height 4000 mm, width unlimited Element Assessment Insulation Integrity Requirements Glass type Height x Width mm max. type no. Clear opening size Area m 2 max. unsupported height 4000 mm, width unlimited Inside application Outside application

10 Schüco steel systems Jansen

Schüco steel systems Jansen 11 Janisol 3 Fire protection system This fire protection series is based on the proven Janisol 2 profile system. Janisol 3 also has a basic depth of only 60 mm. High-quality insulating bars and the mechanically undercut bond ensure a high degree of rigidity for the profiles. Their narrow face width means slimline doors and glass walls can be created, even for fire protection constructions with integrity and insulation up to 60 minutes. The robust profile and comprehensive range of approved fittings and accessories can reduce fabrication time. Users and building operators alike benefit from the high degree of functional reliability of the tested constructions with their familiar narrow face widths. Fire protection closers from the Janisol 3 system look identical to Janisol 2 constructions. Janisol 3 Cultural Centre De Warande, Turnhout/BE Janisol 3 Element Assessment Insulation Integrity Glass type Producer Height x Width max. type no. mm Area m 2 Doors WFRC 135058 60 60 Pyrostop, 21 mm or 27 mm Pilkington 2200 x 1755 3.08 and 60 60 Pyrostop, 23 mm Pilkington 2300 x 1794 3.22 screens 60 60 Pyrobel, 21 mm Glaverbel 2266 x 1640 2.69 60 60 Contraflam 60/N2 Vetrotech 2958 x 2046 4.19 60 60 Paraflam, 30 mm Steindl Glas 2210 x 1460 3.23 60 60 Swissflam, 24 mm Vetrotech 2010 x 1620 2.63 60 60 Pyrostop IGU (21 or 27 + other) Pilkington 2000 x 1400 2.80 60 60 Contraflam 60/N2 ISO (23 or 24 + other) Vetrotech 2200 x 1691 2.86 Element Assessment Insulation Integrity Glass type Producer Height x Width max. type no. mm Area m 2 Screens CC 88367 60 60 all above 60/60 all above 60/60 60 60 all above 60/60 all above 60/60 Element Assessment Insulation Integrity Requirements Producer Height x Width max. type no. mm Area m 2 Single WFRC 135058 60 60 2-point latch all above 60/60 leaf 60 60 Single-point latch all above 60/60 doors Element Assessment Insulation Integrity Requirements Producer Height x Width max. type no. mm Area m 2 Double WFRC 135058 60 60 Single-point latch to main leaf all above 60/60 leaf 60 60 spring loaded shoot-bolt to slave all above 60/60 doors max. unsupported height 4000 mm, width unlimited max. unsupported height 4000 mm, width unlimited max. unsupported height 4000 mm, width unlimited Inside application Outside application General: Other glass combinations and pane sizes may be possible depending on the construction and situation. If in doubt, please refer to the Schüco Jansen Technical Department. Expansion of city hall, Vienna/AT

12 Schüco steel systems Jansen Burglar resistance Secure yet unobtrusive With Schüco steel systems Jansen burglar-resistant systems, an attractive appearance is retained irrespective of the security provided. This is because with these systems, increased security is mainly going on behind the scenes. The innovative technology protects the user in the long term. The security classes are defined in accordance with ENV 1627 by type of burglar, method of burglary, place, risk and recommendation. year. Not to mention the irretrievable loss of items of sentimental value or the physical and psychological damage that results from the use of violence. For this reason, Schüco steel systems Jansen already offer a high level of basic security as standard. The stability of the steel profiles together with the fabrication in accordance with fabrication and assembly guidelines prevent units from being levered out quickly. The longer a unit resists an attempted break-in, the greater the chance of the burglar being noticed. Burglar-resistant windows, doors and façades up to WK3 from Schüco steel systems Jansen always mean comprehensively tested security. All individual components are perfectly matched to one another. The doors tested permit use on the hinge side or the opposite hinge side. Therefore they can also be used for break-out resistance. Key features of security classes: WK1 Building components offer basic protection against attempts to break in using body weight, such as kicking, flying kick, shoulder charge, lifting upwards and tearing out. These building components only offer limited protection against the use of lever tools. WK2 Opportunist burglars also use simple tools like screwdrivers, pliers or hand axes to try to break into locked or bolted building components. WK3 Burglars use a screwdriver and a crow-bar to try to break into locked and bolted building components. Burglar resistance for windows and doors There is a break-in every two minutes. In 70% of cases, windows and doors are simply levered out. This results in damage worth thousands of millions of pounds year after

Schüco steel systems Jansen 13 VISS WK2 Burglar-resistant façades in accordance with ENV 1627 By means of simple modifications to the Jansen-VISS system, we can now guarantee tested security up to WK2 in accordance with ENV 1627. This burglar-resistant façade system can be combined with the standard VISS façade and with VISS Fire. This allows for a uniform appearance, even where a façade construction has to satisfy various different requirements (thermal insulation, fire and burglar protection). VISS WK2 can also be used together with the feature loadbearing profiles Linea and Delta. VISS WK2 offers the following benefits: Identical appearance and same profile range as the standard façade No visible burglar resistance Glass sizes from 500 x 500 mm up to an unlimited size Glass thicknesses up to 50 mm (standard is 24 to 32 mm) Can be combined with standard façades Installation of Janisol windows (WK2 and WK3) Installation of Janisol doors (WK3) The solution for increased security from Schüco steel systems Jansen has been designed with one key consideration in mind: the external look is retained because the protection mechanisms are integrated predominantly inside the units. This means that freedom for creativity in terms of shapes and colours is not impaired. Burglar-resistant fittings Burglar-resistant glass Frame profiles Building structure

14 Schüco steel systems Jansen Burglar resistant windows Opening type Class Glass type or panel Height x Width (mm) Height x Width (mm) Report no. min. leaf dimension max. leaf dimension Side hung* WK1 EN 356-P4A or laminated glass 1284 x 964 1765 x 1325 ift 211 17836/ 955 23 670 WK2 EN 356-P4A 1284 x 964 1765 x 1325 ift 211 17836/ 955 23 670 WK3 EN 356-P6B 1284 x 964 1765 x 1325 ift 211 17836/ 955 23 670 WK3 EN 356-P6B 436 x 876 600 x 1205 PIV 23-2/07E Turn-tilt* WK1 EN 356-P4A or laminated glass 1284 x 964 1765 x 1325 ift 211 17836/ 955 23 670 WK2 EN 356-P4A 1284 x 964 1765 x 1325 ift 211 17836/ 955 23 670 WK3 EN 356-P6B 1284 x 964 1765 x 1325 ift 211 17836/ 955 23 670 WK3 EN 356-P6B 436 x 876 600 x 1205 PIV 23-2/07E Bottom hung* WK3 EN 356-P6B 609 x 1569 837 x 2157 ift 255 33702 Janisol Janisol Primo Economy 50 * Also in combination with screens Burglar resistant doors Type Class Glass type or panel Height x Width (mm) Report no. max. clear opening size Single leaf* WK1 EN 356-P4A 2240 x 1435 ift 212 19348 M/ 255 33884 WK2 EN 356-P4A 2240 x 1435 ift 212 19348 M/ 255 33884 WK3 EN 356-P6B 2240 x 1435 ift 212 19348 M/ 255 33884 WK1 EN 356-P3A 2410 x 1370 ift 212 25835/ 212 25945/ 255 26489/ 255 33885 WK2 EN 356-P4A 2410 x 1370 ift 212 25835/ 212 25945/ 255 26489/ 255 33885 WK3 EN 356-P6B 2410 x 1370 ift 212 25835/ 212 25945/ 255 26489/ 255 33885 WK1 EN 356-P3A 2500 x 1400 ift 212 25834/ 255 26489/ 255 33883 WK2 EN 356-P4A 2500 x 1400 ift 212 25834/ 255 26489/ 255 33883 WK3 EN 356-P6B 2500 x 1400 ift 212 25834/ 255 26489/ 255 33883 Double leaf* WK1 EN 356-P4A 2240 x 2525 ift 212 19348 M/ 255 33884 WK2 EN 356-P4A 2240 x 2525 ift 212 19348 M/ 255 33884 WK3 EN 356-P6B 2240 x 2525 ift 212 19348 M/ 255 33884 WK1 EN 356-P3A 2410 x 2640 ift 212 25835/ 212 25945/ 255 26489/ 255 33885 WK2 EN 356-P4A 2410 x 2640 ift 212 25835/ 212 25945/ 255 26489/ 255 33885 WK3 EN 356-P6B 2410 x 2640 ift 212 25835/ 212 25945/ 255 26489/ 255 33885 WK1 EN 356-P3A 2500 x 2820 ift 212 25834/ 255 26489/ 255 33883 WK2 EN 356-P4A 2500 x 2820 ift 212 25834/ 255 26489/ 255 33883 WK3 EN 356-P6B 2500 x 2820 ift 212 25834/ 255 26489/ 255 33883 Janisol Janisol stainless steel Janisol 2 EI30 Janisol 2 EI30 stainless steel Economy 60 Economy 60 stainless steel * Also in combination with screens Burglar resistant façades Class Glass type or panel Height x Width (mm) Height x Width (mm) Report no. min. screens max. screens WK1* EN 356-P4A 500 x 500 unlimited ift 211 30923/ 255 31472 WK2* EN 356-P4A 500 x 500 unlimited ift 211 30923/ 255 31472 VISS TV VISS TVS * Also in combination with Janisol windows and doors WK2 or WK3

Schüco steel systems Jansen 15 Secure protection from the impact of bullets In the project business, in particular, there are sectors where bullet-resistant solutions are required in addition to protection against break-in, for example, at banks and insurance companies, post offices, government institutions, retail outlets and private residences. Schüco steel systems Jansen offer suitable systems for this area; and it goes without saying that all components of these systems are perfectly coordinated with one another and conform to the relevant security regulations. The maxim - increased protection must be unobtrusive - applies equally to bullet-resistant units. The heavy-weight, bulletresistant constructions appear aesthetically the same as standard window, door or façade profiles, and are therefore seamlessly integrated into the building façade. In terms of the variety of design solutions, the bullet-resistant systems are on a par with the burglarresistant systems. An impressive symbiosis of colour, form and function is achieved. The following systems have been tested in accordance with EN 1522 and 1523: Doors Janisol (steel and stainless steel) Jansen-Economy 50 Jansen-Economy 60 (steel and stainless steel) Security class according to EN 1522 FB2 FB3 FB4 Loading Weapon type Calibre 9 mm 357 44 Remington Luger Magnum 357 Magnum Test distance m 5.0 5.0 5.0 Tolerance m ± 0.5 ± 0.5 ± 0.5 Security glass BR2 BR3 BR4 according to EN 1053 NS/S NS/S NS/S NS = Non-splintering or S = Splintering depending on choice of security glass Windows Janisol (steel and stainless steeel) Janisol Primo Jansen-Economy 50 Façades VISS TV VISS TVS Frame profiles Bullet-resistant glass Security fittings Building structure

16 Schüco steel systems Jansen Tested to CWCT standards Schüco steel systems Jansen have recently been tested to the demanding standards of the British Centre for Windows & Cladding Technology (CWCT). CWCT standards are, in fact, more stringent than those of EN and include a static-dynamic test using an aeroplane propeller. The CWCT test certificate is increasingly expected for all types of façade in England and is recognised internationally as a quality standard. Especially in Hong Kong and China, where wind loads on façades of over 300 kg/m 2 are not uncommon. Jansen-VISS is a profile system for thermally insulated façades, which also meets fire protection requirements. The mullion/ transom construction, based on the dry glazing principle, was tested for face widths of 50 and 60 mm and VISS Fire (fire protection) with three different T-cleats. The test result clearly demonstrates the ability of the fully insulated steel system to withstand extreme weather conditions. The sample was tested in the following sequence and the associated results are as follows: Test 1 Air permeability 600 Pa Test 2 Watertightness, Static 600 Pa Test 3 Wind resistance, Serviceability 2400 Pa Test 4 Repeat Air permeability 600 Pa Test 5 Repeat Watertightness, Static 600 Pa Test 6 Watertightness, Dynamic Test 7 Watertightness, Hose 220K Pa Test 8 Wind resistance, Safety 3600 Pa

Schüco steel systems Jansen 17 VISS steel façades that conform to EU standards For many years, it has been necessary for curtain walls meeting European product standard EN 13830 to be stamped with the CE mark. EU guidelines stipulate that the person who brings the curtain wall into circulation as an end product, i.e. the fabricator, must be CE-certified. Schüco steel systems Jansen offer partners much easier CE approval, because the test standards required for approval have already been met and documented in detail for the following VISS steel systems: VISS TV (thermally insulated mullion-transom construction) VISS TVS (highly thermally insulated mullion-transom construction) VISS Fire fire-resistant façades VISS Basic (independently supported façade construction) Test results (regulated product properties according to EN 13830) Air permeability Resistance to driving rain The tests, in which Janisol steel windows and panels were also included in the sample, comprise both the Delta and Linea profile series and the 50 and 60 mm profile face widths. The corresponding product passes are available for the metal fabrication partners. AE RE 1200 (Pa) Impact strength (pendulum impact test) from inside I5 (drop height 950 mm) from outside E5 (drop height 950 mm) Resistance to wind load (permitted load) 2000 Pa (2 kn/m 2 ) (increased load) 3000 Pa (3 kn/m 2 ) Swimming pool, Darlaston/GB

18 Schüco steel systems Jansen All systems and functions One look Secure yet unobtrusive. The profile systems of the Schüco steel systems Jansen provide a consistent appearance across the entire building envelope and for interiors. Façades, windows and doors have an identical appearance irrespective of the unit requirements since the functions are integrated into the steel profiles. Whether fire resistance, burglar resistance or bullet resistance, insulated or non-insulated systems, the whole look is retained. Security is guaranteed by tested systems. Jansen-Economy 50 E30-E60 Jansen-Economy 60 E30-E60 Janisol Hotel Allegro, Berne/CH Janisol 2 EI30 / E60/EI30 Bargetze + Partner, Triesen/FL Janisol 3 EI60

Schüco steel systems Jansen 19 The right system for every requirement System Janisol Profile depth doors 60 mm Profile depth windows 60/64 mm Windows Doors Conservatories Thermally insulated Fire resistant Smoke resistant Burglary protection Bullet resistance Noise reduction Façades Fixed screens Screen glazed Specifications Flush-fitted door series, face-fitted window series Janisol Primo Profile depth 60/64 mm Face-fitted window series Janisol stainless steel Profile depth doors 60 mm Profile depth windows 60/64 mm Janisol 2 Profile depth 60 mm Flush-fitted door series, face-fitted windows series, 1.4401 stainless steel Tested to EI30 (F30/T30) fire resistance levels and assessed for integrity and insulation requirements of BS 476 Pt 22 Janisol 3 Profile depth 60 mm Tested to EI60 (F60/T60) fire resistance levels and assessed for integrity and insulation requirements of BS 476 Pt 22 Janisol 4 Profile depth 70 mm Tested to EI90 (F90/T90) fire resistance levels and assessed for integrity and insulation requirements of BS 476 Pt 22 VISS TV Face width 50/60 mm Mullion and transom construction for vertical glazing, frame material group 2.1, tested in accordance with EN 13830 VISS TVS Face width 50/60 mm VISS Basic Face width 50/60 mm Mullion and transom construction for vertical and inclined glazing, frame material group 1, tested in accordance with EN 13830 Independent beam curtain-walling for steel and stainless steel façades, tested in accordance with EN 13830 VISS Fire Face width 50 mm Mullion and transom construction for vertical and inclined glazing, tested for fire resistance E30/60/90, EI30/60/90, tested according to EN 13830 Jansen-Economy 50 Profile depth doors 50 mm Profile depth windows 50/58,5 mm Tested for smoke protection in accordance with DIN 18095 Jansen-Economy 50 stainless steel Profile depth 50 mm Jansen-Economy 60 Profile depth 60 mm Doors and windows, 1.4307 stainless steel Flush-fitted door series, tested for smoke protection in accordance with DIN 18095 Jansen-Economy 60 stainless steel Profile depth 60 mm Flush-fitted door series, 1.4401 stainless steel Standard profiles Profile depth 40, 50, 60, 80 mm Hollow steel profile series for swing doors, frame doors, horizontal pivot windows and pilaster profiles Folding and sliding doors Profile depth 50 and 60 mm Tested according to EN 13241-1

Schüco Your Partner for Windows and Solar Products As leading innovator in system-based construction, Schüco supplies components for the whole building envelope, including specialised software solutions for design, construction, calculation and fabrication. Aluminium systems Comprehensive range of profiles for façades, skylights, windows, doors, conservatories, solar shading, balconies, balustrades, protection and security constructions Steel systems Individual profile solutions for façades, industrial doors and door engineering PVC-U systems A broad spectrum of products and a wide variety of design options from high quality PVC-U system engineering Solar products Photovoltaic and solar heating units perfectly tailored to one another guarantee a uniform installation system Schüco Design Advanced aluminium systems technology for a broad range of designs Schüco International KG Whitehall Avenue Kingston Milton Keynes MK10 OAL Tel. 0044 1908 282 111 Fax 0044 1908 282 131 www.schueco.co.uk 598 368 / 11/2007 / Subject to change