INTEGRATED OEM ELASTOMER CATALOG

Similar documents
Datasheets - General Purpose Elastomers

O-Rings & Circlips Catalogue

Elastomer Guide. Butyl Rubber (IIR) General Information. Cure system - Sulfur-Cured. Service Temperatures. Other Common Variations

RUBBER GUIDE. Our areas of expertise. MedTech. Silicone. Rubber. FoodTech. Assembly & Testing. Certified according to ISO 9001, & 13485

Module 6: Chemical Resistance

FluoroelastomerIs the Best Material for Water Header Gasket of Diesel Engine

WELCOME TO CLWYD COMPOUNDERS LTD. OVER 30 YEARS OF COMPOUNDING EXCELLENCE:

The Right Seal for Every Application

Table of CONTENTS AB AB AB-138 (FDA) AB BLAST AB

Physical Properties. Temperature Limits. Durometer 60 +/-5. Average Elongation 350% Specific Gravity 1.50 Polymer Content 20% -20 o F to +212 o F

Sealing Solutions for Oil and Gas

TABLE OF CONTENTS. Remember ROGERS for Rubber & Plastic page 2

Series PVI/PVIF. Standard and Full Port Eccentric Plug Valves Conforming to AWWA C517

Model HD20F. DATA SHEET Specifications & Performance. Non-Metallic Flap Valve Design Level 1. Certified Quality

JIS O-RING SIZES. Sarasota, FL Office: Kennesaw, GA Office:

O RINGS, GASKETS, DIAPHRAGMS SIZING GUIDE FDA AND USP CLASS VI

Static SealS

O-RINGS METRIC SIZES AVAILABLE

ÍNDICE FICHAS TÉCNICAS

VSI. Series BFII WATERWORKS. BUTTERFLY VALVES CONFORMING TO AWWA C504 Replaceable Seated 24-Inch and Greater Butterfly Valve

Safety Contact Strips. Safety Contact Strips

SUNNDA CORPORATION. Pressure Control Equipment. Boost Your Bottom Line! Sunnda Corporation

OIL & WATER VALVES DIAPHRAGM MOTOR VALVE DUCTILE IRON VALVES AVAILABLE: ITEM QTY. DESCRIPTION PART NO.

2002 Replacement Parts Catalog

PETSEALS. Material TENSILE STRENGTH (KG/CM 2 ) ELONGATION(%) TEMPERATURE RANGE( ) MATERIAL %MAX HRSX NITRILE 70 (NBR 70) ~100 70H x

DESIGN & MFRS OF NON METALLIC AND METALLIC PARTS FOR AEROSPACE APPLICATIONS

AIR VALVE No-lube, no-stall design 16 (27) 18 (30) U.S. Gallons per minute Liters per minute CAPACITY

PRESSURE REGULATORS PRESSURE REDUCING. APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure

High Performance Elastomers

Titan Check Valves. Call. Fax. . Visit. Titan Flow Control. Your Pipeline to the Future

Oilfield Service and Distribution Products

OUNCES PRESSURE REGULATOR

PULLEY DIVISION MANUFACTURERS OF HIGH QUALITY PULLEYS AND SPROCKETS

Reach. Catalogue 01/2014. Fisatech s.r.o., Hlavná 361/53, Z. Teplica, tel.: ,

PRESSURE REGULATORS LIQUID BACK PRESSURE

Recycling with ECO-FLEX RTPV Thermoplastic Elastomer

PRESSURE REGULATORS LIQUID BACK PRESSURE

Singlegates Roof Flashings made of ShieldLine Materials

ONE-STOP. Ningbo Hydraulic Sealing Co.,Ltd. O Rings. Rotary Shaft Seals Hydraulic Seals EASY TO FIND YOUR SEALS HERE

CHEMICAL RESISTANCE

SELF-SEALING FASTENERS

Head office : Les Petites Roches TREPT (Lyon) - France Tel : +33 (0) Fax : +33 (0)

SERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES 2-48

PRESSURE REGULATORS GAS BACK PRESSURE. APPLICATION: Vent lines on oil separators, flow treaters, compressor stations, gas gathering systems.

Design Features and Advantages DUCTILE IRON - INSAMCOR STAINLESS STEEL - INSAMCOR. Mechanically retained moulded body seal

Products of integrity from people of integrity. w w w. n e w m a n g a s k e t. c o m

SEAL MANUFACTURERS & DISTRIBUTORS GASKET CUTTERS. Extrusions Brochure. Dublin: +353 (0) Cork: +353 (0)

O RINGS FDA AND USP CLASS VI

OUNCES PRESSURE REGULATOR

Transportation Valves

RING FLANGE-TYTE Gasket

Buffer elements 1109

Pulley Lagging for Drive Pulleys... Superior Traction for Conveyor and Elevator Systems

Automotive Vibration Control Technology

D and DL Annular Blowout Preventers

Vulcatec your partner for hot vulcanized gaskets

Piston Seals Wipers O-Rings & Kits Custom Parts Specialty Parts Services Wear Guides Rod Seals UL Compounds QUALITY VALUE SERVICE.

U Blowout Preventer 13-5/8" 10,000 psi WP

Natural Rubber (NR) Workable Temperature (dry heat)

2"- 20" (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES CELEBRATING. The High Performance Company

SERIES CVI AWWA C508 SWING CHECK VALVES 2-48

For over 50 years OTECO, Inc. has been providing high quality oilfield equipment to the worldwide oil and gas markets.

WORLDWIDE OILFIELD MACHINE

Oil & Gas. Sealing Products Guide. Volume Two

2"- 20" (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company

Sealing Solutions for Aerospace

Guarantee for O-rings? Factors influencing their service life.

J-FLEX HYDRAULIC HOSE SOLUTIONS

Products. Butyl. Hypalon (CSM, CSE) Pure Gum. EPDM Cloth Inserted (CI) EPDM Peroxide Cure. EPDM White Meets FDA. EPDM NSF 61 Compliant AFLAS

2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company

RODEC TUBING ROTATOR SOLUTIONS

Tread Wheels. Polyurethane. Polyurethane Professional Introduction. XP X-treme Plus Solid Elastomer Wheel, Capacities to 2500 lbs.

Design Ref. Material Dimensions metr. inch NR IR SBR BR IIR EPDM NBR ECO CR CSM AU, EU HNBR VMQ Q } PVMQ FVMQ FPM ACM FFKM PTFE NBR EPDM FPM VMQ

Petroleum Oils for Rubber

Top View Single or Double. Side View - Single. Table 1

> CR-TEC Butterfly Valves

COMPRESSED SHEET GASKET MATERIAL AVAILABLE MATERIALS

TRUNNION MOUNTED BALL VALVES. Ball Valves

II 2GD b T5. AIR VALVE No-lube, no-stall design 16 (27) 18 (30) U.S. Gallons per minute. Liters per minute. Capacity

MIL- DTL D TY 2 - Compressed Sheet with Aramid Fibers/SBR Binder

Section 18 Butterfly Valves

About TekMarine. Disclaimer. Copyright

2"- 20" (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company

TL BOP. TL Custom Features:

QUAD-RING R Seal. Description Applications Materials Design Instructions Installation Instructions... 10

CLOSURE DIMENSIONS SIZES 6-12 CLASS 150/900TV VERTICAL WITH HINGE SIZES 6-12 CLASS 150/900TH HORIZONTAL WITH HINGE

Direct-operated, Back Pressure Regulating Valve. Features

Conley Product Bulletin

LEVER OPERATED LIQUID LEVEL CONTROLS

II 2GD T5. U.S. Patent #5,996,627 & 6,241,487 Other U.S. Patents Applied for. AIR VALVE No-lube, no-stall design

Heavy Duty Wheel Seals and Agricultural Equipment Seals

INDUSTRIAL HOSES - compensators

PASCO PASCO PINCH VALVES

MECHANICAL LEVEL CONTROLS

KEY PORT SERIES 400 ECCENTRIC VALVES

Stainless Products, Inc.

Technology. Robert Keller TECHNISCHE INFORMATIONSBIBLIOTHEK UNIVERSITATSBIBLIOTHEK HANNOVER

The Number One Choice of Line Stopping Contractors

V-Rings around the clock... around the clock...

Influence of Rubber Process Oils on EPDM Compound Properties. Dr. Markus Hoffmann SGF Meeting Huskvarna, Sweden November 24, 2016

Transcription:

INTEGRATED OEM ISA SPHERICAL BOP INTEGRATED OEM PULSATION DAMPENERS INTEGRATED OEM ISA SPHERICAL PACKING ELEMENT INTEGRATED OEM RAM & ANNULAR SEAL KITS INTEGRATED OEM PULSATION DAMPENER DIAPHRAGMS K STYLE EMSCO STYLE INTEGRATED OEM IK (GK) PACKING ELEMENT INTEGRATED OEM IK Annular (GK) BOP INTEGRATED OEM IU RAM FORGED SHEAR BOP (U Style) Ram Assemblies: Ram Blocks Top Seals Front Packers VBR SBR INTEGRATED OEM RAM TOP SEALS FRONT PACKERS OEM MANUFACTURER OF API MONOGRAMED PRESSURE CONTROL EQUIPMENT INTEGRATED OEM ELASTOMER CATALOG

Page 2 of 23 INTEGRATED ELASTOMER USA OEM MANUFACTURING FACILITY INTRODUCTION: INTEGRATED USA was established to manufacture and provide In-house engineered elastomeric products designed for Integrated OEM Pressure Control Industry Standard Equipment (API 6A API 16A ASME U PD). INTEGRATED provides a complete line of Oilfield Rubber Products. Our manufacturing division produces a variety of engineered rubber products for our pressure control equipment and for the aftermarket (spare parts). We take great pride in producing some of the largest and most precisely engineered rubber parts available. THE INTEGRATED ADVANTAGE: All Elastomer products are designed, engineered and manufactured by Integrated Elastomers USA in coordination with Integrated Corporate OEM Pressure Control Equipment specifications OEM Elastomer Manufacturing specific to the oil & gas pressure control market Aftermarket Premier Oilfield Products Proven track record with major drilling and workover clients Large stock inventory or quick production turnaround to satisfy customer delivery needs 24/7 product support Customer 24/7 access to purchased product MTRs through Integrated protected FTP site Wide variety of Elastomeric materials to satisfy customers job specific needs Professional customer focus from inquiry quotations, delivery to satisfaction follow-up CUSTOMER SATISFACTION IS OUR PRIMARY AND ONLY FOCUS

Page 3 of 23 TABLE OF CONTENT PRODUCT LINE PAGE NO. ANNULAR BOP PACKING ELEMENT Spherical - ISA (Shaffer Spherical Style) 4 Annular - IK (GK Style) 4 RAM BOP TOP SEAL & FRONT PACKER 7-1/16 5k IE (WSI Style) 5 9-3k IWP (LWP/Sentinel II Style) 6 11-3k I70 (Type 70 Style) 7 11-5k I70 (Type 70 Style) 8 13-5/8-3 5k I70 (Type 70 Style) 9 7-1/16-3 5 10 15k IU (U Style) 10 11-3 5 10k IU (U Style) 11 13-5/8-3 5 10k IU (U Style) 12 7-1/16-3 5 10 15k IU (U Style) STRIPPER FRONT PACKERS AND INSERTS 13 RAM & ANNULAR BOP SEAL KITS 7-1/16-5k IE Ram Hydraulic Seal Kit 14 7-1/16-5k T81 Ram Hydraulic Seal Kit 14 7-1/16-5k T81 Ram Manual Seal Kit 14 7-1/16-5K LWS Ram Hydraulic Seal Kit 14 7-1/16-3 5 10 15k IU Ram Standard Seal Kit 14 7-1/16-3 5 10 15k IU Ram Large Bore Seal Kit 14 7-1/16-3 5 10 15k IU Ram Tandem Booster Seal Kit 14 9 3k IWP Ram Seal Kit 14 11-3k IWS Ram Seal Kit 14 11-5k IWS Ram Seal Kit 14 11-5k IWS IWP Ram Seal Kit 14 11-3 5 10k IU Ram Standard Seal Kit 14 11-3 5 10k IU Ram Large Bore Seal Kit 14 11-3 5 10k IU Ram Tandem Booster Seal Kit 14 13-5/8-5K IWS Ram Seal Kit 14 13-5/8-5k IWS IWP Ram Seal Kit 14 13-5/8-3 5 10k IU Ram Standard Seal Kit 14 13-5/8-3 5 10k IU Ram Large Bore Seal Kit 14 13-5/8-3 5 10k IU Ram Tandem Booster Seal Kit 14 7-1/6 5k Spherical Annular ISA (Shaffer Spherical Style) 15 9-3k Spherical Annular ISA (Shaffer Spherical Style) 15 11-3k Spherical Annular ISA (Shaffer Spherical Style) 15 11-5k Spherical Annular ISA (Shaffer Spherical Style) 15 13-5/8-5k Spherical Annular ISA (Shaffer Spherical Style) 15 21-2k Spherical Annular ISA (Shaffer Spherical Style) 15 7-1/16-5k Annular IK (GK Style) 15 11-5k Annular IK (GK Style) 15 13-5/8-5k Annular IK (GK Style) 15 Miscellaneous Seals: Door Seals and Wear Band 16 PULSATION DAMPENER DIAPHRAGMS & ACCESSORIES Production Pulsation Dampener: 1 gal, 2.5 gal, 5 gal, 10 gal & 20 gal 17 Drilling Pulsation Dampener: 10 gal and 20 gal 17 Emsco: PD 45, PD 55 and PD 55A 17 Pulsation Dampener Miscellaneous Items (Charging Hoses, Stabilizer Plates, Bottom Gaskets and Charging Valves) 18 PIPE WIPERS Flats and Duals (Red & Black) in 9 12 14 17 22 24 26 Sizes (O.D.) 19 Pipe Wiper Cutting Machine 19 STRIPPER RUBBERS Texas Short Hall Stripper Rubbers 20 Double E Sucker Rod Rubbers 20 Wireline Oil Saver Stripper Rubbers 20 ELASTOMER INFORMATION Material Description 21 & 22 Storage and Age Control Guideline 23

Page 4 of 23 ANNULAR BOP PACKING ELEMENTS ISA (Spherical Style) PACKING ELEMENT Integrated OEM Spherical Annular ISA BOP Packing Element Size Pressure Rating Element Material Product Code Weight Per Unit 7-1/16 (180 mm) 3k 5k NR (Natural Rubber) 82-221-735-01 NBR (Nitrile Buna-N Rubber) 82-221-735-02 125 lbs 57 kg 9 (229 mm) 3k 5k NR (Natural Rubber) 82-221-903-01 NBR (Nitrile Buna-N Rubber) 82-221-903-02 260 lbs 118 kg 11 (279 mm) 3k NR (Natural Rubber) 82-221-113-01 NBR (Nitrile Buna-N Rubber) 82-221-113-02 360 lbs 163 kg 11 (279 mm) 5k NR (Natural Rubber) 82-221-115-01 NBR (Nitrile Buna-N Rubber) 82-221-115-02 463 lbs 210 kg 13-5/8 (346 mm) 3k 5k NR (Natural Rubber) 82-221-135-01 NBR (Nitrile Buna-N Rubber) 82-221-135-02 649 lbs 294 kg 21-1/4 (540 mm) 2k NR (Natural Rubber) 82-221-212-01 NBR (Nitrile Buna-N Rubber) 82-221-212-02 945 lbs 429 kg IK (GK Style) PACKING ELEMENT Integrated OEM Annular Ik BOP Packing Element Size Pressure Rating Element Material Product Code Weight Per Unit 7-1/16 (180 mm) 3k NR (Natural Rubber) 82-200-073-01 NBR (Nitrile Buna-N Rubber) 82-200-073-02 120 lbs 54 kg 7-1/16 (180 mm) 5k NR (Natural Rubber) 82-220-075-01 NBR (Nitrile Buna-N Rubber) 82-220-075-02 120 lbs 54 kg 11 (279 mm) 3k NR (Natural Rubber) 82-220-113-01 NBR (Nitrile Buna-N Rubber) 82-220-113-02 367 lbs 166 kg 11 (279 mm) 5k NR (Natural Rubber) 82-220-115-01 NBR (Nitrile Buna-N Rubber) 82-220-115-02 367 lbs 166 kg 13-5/8 (346 mm) 3k NR (Natural Rubber) 82-220-133-01 NBR (Nitrile Buna-N Rubber) 82-220-133-02 458 lbs 208 kg 13-5/8 (346 mm) 5k NR (Natural Rubber) 82-220-135-01 NBR (Nitrile Buna-N Rubber) 82-220-135-02 458 lbs 208 kg

Page 5 of 23 TOP SEALS RAM BOP TOP SEALS & FRONT PACKERS FRONT PACKERS (Blind & Pipe Options) 7-1/16 5K IE (WSI Style) FRONT PACKERS TOP SEALS TOP SEALS: Blind Ram Assembly Pipe Ram Assembly TOP SEAL - Round CSO Thru 5-1/2 5k XNBR 70-101-000 0.40 lbs 0.18 kg TOP SEAL - Flat CSO Thru 5-1/2 5k XNBR 70-101-000-F 0.40 lbs 0.18 kg FRONT PACKERS: FRONT PACKER - Round Face CSO 5k XNBR 70-101-001-1 1.80 lbs 0.54 kg FRONT PACKER - Flat Face CSO 5k XNBR 70-101-001-1-F 1.80 lbs 0.54 kg FRONT PACKER - Round Face 1.66 5k XNBR 70-101-002-1 1.40 lbs 0.64 kg FRONT PACKER - Flat Face 1.66 5k XNBR 70-101-002-1-F 1.40 lbs 0.64 kg FRONT PACKER - Round Face 1.90 5k XNBR 70-101-002-15 1.60 lbs 0.73 kg FRONT PACKER - Flat Face 1.90 5k XNBR 70-101-002-15-F 1.60 lbs 0.73 kg FRONT PACKER - Round Face 2-3/8 5k XNBR 70-101-002-2 1.40 lbs 0.64 kg FRONT PACKER - Flat Face 2-3/8 5k XNBR 70-101-002-2-F 1.40 lbs 0.64 kg FRONT PACKER - Round Face 2-7/8 5k XNBR 70-101-002-3 1.40 lbs 0.64 kg FRONT PACKER - Flat Face 2-7/8 5k XNBR 70-101-002-3-F 1.40 lbs 0.64 kg FRONT PACKER - Round Face 3-1/2 5k XNBR 70-101-002-3 1.00 lbs 0.45 kg FRONT PACKER - Flat Face 3-1/2 5k XNBR 70-101-002-3-F 1.00 lbs 0.45 kg FRONT PACKER - Round Face 4 5k XNBR 70-101-002-6 1.20 lbs 0.54 kg FRONT PACKER - Flat Face 4 5k XNBR 70-101-002-6-F 1.20 lbs 0.54 kg FRONT PACKER - Round Face 4-1/2 5k XNBR 70-101-002-7 1.20 lbs 0.54 kg FRONT PACKER - Flat Face 4-1/2 5k XNBR 70-101-002-7-F 1.20 lbs 0.54 kg FRONT PACKER - Round Face 5 5k XNBR 70-101-002-8 0.80 lbs 0.36 kg FRONT PACKER - Flat Face 5 5k XNBR 70-101-002-8-F 0.80 lbs 0.36 kg FRONT PACKER - Round Face 5-1/2 5k XNBR 70-101-002-13 0.60 lbs 0.27 kg FRONT PACKER - Flat Face 5-1/2 5k XNBR 70-101-002-13-F 0.60 lbs 0.27 kg

Page 6 of 23 RAM BOP TOP SEALS & FRONT PACKERS TOP SEALS FRONT PACKERS (Blind & Pipe) 9 3K IWP (LWP- Sentinel II) FRONT PACKERS TOP SEALS Blind Ram Assembly Pipe Ram Assembly TOP SEAL: TOP SEAL CSO Thru 5-1/2 3k XNBR 70-102-000 0.60 lbs 0.27 kg FRONT PACKERS: FRONT PACKER CSO 3k XNBR 70-102-001 2.00 lbs 0.91 kg FRONT PACKER 2-3/8 3k XNBR 70-102-002-2 2.40 lbs 1.09 kg FRONT PACKER 2-7/8 3k XNBR 70-102-002-3 2.40 lbs 1.09 kg FRONT PACKER 3-1/2 3k XNBR 70-102-002-5 2.00 lbs 0.91 kg FRONT PACKER 4 3k XNBR 70-102-002-6 3.00 lbs 1.36 kg FRONT PACKER 4-1/2 3k XNBR 70-102-002-7 2.80 lbs 1.27 kg FRONT PACKER 5 3k XNBR 70-102-002-9 2.40 lbs 1.09 kg FRONT PACKER 5-1/2 3k XNBR 70-102-002-19 2.00 lbs 0.91 kg

Page 7 of 23 BLIND FRONT PACKER-TOP SEAL UNIT RAM BOP TOP SEALS & FRONT PACKERS 11 3K I70 (T70 Style) FRONT PACKER - TOP SEAL UNIT PIPE FRONT PACKER-TOP SEAL UNIT Blind Ram Assembly Pipe Ram Assembly FRONT PACKER TOP SEAL UNITS: FRONT PACKER TOP SEAL UNIT CSO 3k NBR 70-401-711 6.40 lbs 2.90 kg FRONT PACKER TOP SEAL UNIT 2-3/8 3k NBR 70-401-711-1 6.80 lbs 3.08 kg FRONT PACKER TOP SEAL UNIT 2-7/8 3k NBR 70-401-711-2 6.80 lbs 3.08 kg FRONT PACKER TOP SEAL UNIT 3-1/2 3k NBR 70-401-711-4 6.60 lbs 2.99 kg FRONT PACKER TOP SEAL UNIT 4 3k NBR 70-401-711-5 7.00 lbs 3.18 kg FRONT PACKER TOP SEAL UNIT 4-1/2 3k NBR 70-401-711-6 7.00 lbs 3.18 kg FRONT PACKER TOP SEAL UNIT 5 3k NBR 70-401-711-7 6.80 lbs 3.08 kg FRONT PACKER TOP SEAL UNIT 5-1/2 3k NBR 70-401-711-8 6.80 lbs 3.08 kg FRONT PACKER TOP SEAL UNIT 6-5/8 3k NBR 70-401-711-9 6.60 lbs 2.99 kg FRONT PACKER TOP SEAL UNIT 7 3k NBR 70-401-711-10 6.40 lbs 2.90 kg FRONT PACKER TOP SEAL UNIT 7-5/8 3k NBR 70-401-711-11 6.40 lbs 2.90 kg FRONT PACKER TOP SEAL UNIT 8-5/8 3k NBR 70-401-711-12 6.00 lbs 2.81 kg

Page 8 of 23 BLIND FRONT PACKER-TOP SEAL UNIT RAM BOP TOP SEALS & FRONT PACKERS 11 5K I70 (T70 Style) FRONT PACKER - TOP SEAL UNIT PIPE FRONT PACKER-TOP SEAL UNIT Blind Ram Assembly Pipe Ram Assembly FRONT PACKER TOP SEAL UNITS: FRONT PACKER TOP SEAL UNIT CSO 5k NBR 70-401-701 7.20 lbs 3.27 kg FRONT PACKER TOP SEAL UNIT 2-3/8 5k NBR 70-401-701-1 7.20 lbs 3.27 kg FRONT PACKER TOP SEAL UNIT 2-7/8 5k NBR 70-401-701-2 7.20 lbs 3.27 kg FRONT PACKER TOP SEAL UNIT 3-1/2 5k NBR 70-401-701-4 7.00 lbs 3.18 kg FRONT PACKER TOP SEAL UNIT 4 5k NBR 70-401-701-5 7.60 lbs 3.45 kg FRONT PACKER TOP SEAL UNIT 4-1/2 5k NBR 70-401-701-6 7.60 lbs 3.45 kg FRONT PACKER TOP SEAL UNIT 5 5k NBR 70-401-701-7 7.40 lbs 3.36 kg FRONT PACKER TOP SEAL UNIT 5-1/2 5k NBR 70-401-701-8 7.40 lbs 3.36 kg FRONT PACKER TOP SEAL UNIT 6-5/8 5k NBR 70-401-701-9 7.20 lbs 3.27 kg FRONT PACKER TOP SEAL UNIT 7 5k NBR 70-401-701-10 7.00 lbs 3.18 kg FRONT PACKER TOP SEAL UNIT 7-5/8 5k NBR 70-401-701-11 7.00 lbs 3.18 kg FRONT PACKER TOP SEAL UNIT 8-5/8 5k NBR 70-401-701-12 6.80 lbs 3.08 kg VARIABLE BORE RAM Front Packer VARIABLE BORE RAM Top Seal VBR 2-7/8 to 5 VBR 2-7/8 to 5 5k NBR 70-401-701-V 9.20 lbs 4.17 kg 5k NBR 70-401-701-V1 1.00 lbs 0.45 kg

Page 9 of 23 BLIND FRONT PACKER-TOP SEAL UNIT RAM BOP TOP SEALS & FRONT PACKERS 13-5/8 5K I70 (T70 Style) FRONT PACKER - TOP SEAL UNIT PIPE FRONT PACKER-TOP SEAL UNIT Blind Ram Assembly Pipe Ram Assembly FRONT PACKER TOP SEAL UNITS: FRONT PACKER TOP SEAL UNIT CSO 5k NBR 70-401-801 8.40 lbs 3.81 kg FRONT PACKER TOP SEAL UNIT 2-3/8 5k NBR 70-401-801-1 8.40 lbs 3.81 kg FRONT PACKER TOP SEAL UNIT 2-7/8 5k NBR 70-401-801-2 8.40 lbs 3.81 kg FRONT PACKER TOP SEAL UNIT 3-1/2 5k NBR 70-401-801-3 8.20 lbs 3.72 kg FRONT PACKER TOP SEAL UNIT 4 5k NBR 70-401-801-4 8.80 lbs 4.00 kg FRONT PACKER TOP SEAL UNIT 4-1/2 5k NBR 70-401-801-5 8.80 lbs 4.00 kg FRONT PACKER TOP SEAL UNIT 5 5k NBR 70-401-801-6 8.60 lbs 3.90 kg FRONT PACKER TOP SEAL UNIT 5-1/2 5k NBR 70-401-801-7 8.60 lbs 3.90 kg FRONT PACKER TOP SEAL UNIT 6-5/8 5k NBR 70-401-801-8 8.40 lbs 3.81 kg FRONT PACKER TOP SEAL UNIT 7 5k NBR 70-401-801-9 8.40 lbs 3.81 kg FRONT PACKER TOP SEAL UNIT 7-5/8 5k NBR 70-401-801-10 8.40 lbs 3.81 kg FRONT PACKER TOP SEAL UNIT 8-5/8 5k NBR 70-401-801-11 7.80 lbs 3.54 kg VARIABLE BORE RAM Front Packer VARIABLE BORE RAM Top Seal VBR 2-7/8 to 5 VBR 2-7/8 to 5 5k NBR 70-401-801-V 9.20 lbs 4.17 kg 5k NBR 70-401-801-V1 1.00 lbs 0.45 kg

Page 10 of 23 TOP SEAL RAM BOP TOP SEALS & FRONT PACKERS FRONT PACKERS (CSO, Pipe & VBR) 7-1/16 3 5 10 15K IU (U Style) FRONT PACKERS TOP SEALS Blind Ram Assembly Pipe Ram Assembly VBR Assembly SBR Assembly TOP SEALS: TOP SEAL CSO Thru 5-1/2 3 5 10 15k XNBR 95-070000 0.80 lbs 0.36 kg FRONT PACKERS: FRONT PACKER CSO 3 5 10 15k XNBR 70-0703-00009 7.00 lbs 3.16 kg FRONT PACKER 2-3/8 3 5 10 15k XNBR 70-0703-00010 6.40 lbs 2.90 kg FRONT PACKER 2-7/8 3 5 10 15k XNBR 70-0703-00011 6.20 lbs 2.81 kg FRONT PACKER 3-1/2 3 5 10 15k XNBR 70-0703-00012 5.80 lbs 2.63 kg FRONT PACKER 4 3 5 10 15k XNBR 70-0703-00013 5.60 lbs 2.54 kg FRONT PACKER 4-1/2 3 5 10 15k XNBR 70-0703-00014 5.00 lbs 2.27 kg FRONT PACKER 5 3 5 10 15k XNBR 70-0703-00015 4.80 lbs 2.18 kg FRONT PACKER 5-1/2 3 5 10 15k XNBR 70-0703-00016 4.60 lbs 2.09 kg VARIABLE BORE RAM TOP SEALS AND FRONT PACKERS: VARIABLE BORE RAM TOP SEAL 2-3/8 to 3-1/2 3 5 10 15k XNBR 95-0710000-V-02 0.80 lbs 0.36 kg VARIABLE BORE RAM FRONT PACKER 2-3/8 to 3-1/2 3 5 10 15k NBR 95-0710000-V-03 8.40 lbs 3.81 kg VARIABLE BORE RAM FRONT PACKER 2-7/8 to 4 3 5 10 15k NBR 95-0710000-V-04 8.10 lbs 3.67 kg SHEAR BLIND RAM TOP SEALS BLADE PACKER SIDE PARKERS: SHEAR BLIND RAM TOP SEAL 7-1/16 3 5 10 15k XNBR 95-0710000 0.80 lbs 0.36 kg SHEAR BLIND RAM BLADE PACKER 7-1/16 3 5 10 15k XNBR 95-07100023-BP 4.60 lbs 2.90 kg SHEAR BLIND RAM - SIDE PACKER 01 7-1/16 3 5 10 15k XNBR 95-07100023-SP01 1.00 lbs 0.45 kg SHEAR BLIND RAM - SIDE PACKER 02 7-1/16 3 5 10 15k XNBR 95-07100023-SP01 1.00 lbs 0.45 kg

Page 11 of 23 TOP SEAL RAM BOP TOP SEALS & FRONT PACKERS FRONT PACKERS (CSO, Pipe & VBR) 11 3 5 10K IU (U Style) FRONT PACKERS TOP SEALS Blind Ram Assembly Pipe Ram Assembly VBR Assembly SBR Assembly TOP SEALS: TOP SEAL CSO Thru 9-5/8 3 5 10k XNBR 95-111000 1.6 lbs 0.73 kg FRONT PACKERS: FRONT PACKER CSO 3 5 10k XNBR 95-111002 11.60 lbs 5.26 kg FRONT PACKER 2-3/8 3 5 10k XNBR 95-111002-2 10.80 lbs 4.90 kg FRONT PACKER 2-7/8 3 5 10k XNBR 95-111002-3 10.60 lbs 4.81 kg FRONT PACKER 3-1/2 3 5 10k XNBR 95-111002-5 10.40 lbs 4.72 kg FRONT PACKER 4 3 5 10k XNBR 95-111002-6 10.20 lbs 4.63 kg FRONT PACKER 4-1/2 3 5 10k XNBR 95-111002-7 10.40 lbs 4.72 kg FRONT PACKER 5 3 5 10k XNBR 95-111002-8 10.40 lbs 4.72 kg FRONT PACKER 5-1/2 3 5 10k XNBR 95-111002-9 12.00 lbs 5.44 kg FRONT PACKER 6-5/8 3 5 10k XNBR 95-111002-10 11.00 lbs 4.99 kg FRONT PACKER 7 3 5 10k XNBR 95-111002-11 9.80 lbs 4.45 kg FRONT PACKER 7-5/8 3 5 10k XNBR 95-111002-12 9.80 lbs 4.45 kg FRONT PACKER 8-5/8 3 5 10k XNBR 95-111002-13 9.60 lbs 4.35 kg FRONT PACKER 9-5/8 3 5 10k XNBR 95-111002-14 9.40 lbs 4.26 kg VARIABLE BORE RAM TOP SEALS AND FRONT PACKERS: VARIABLE BORE RAM TOP SEAL 2-7/8 to 5 4-1/2 TO 7 3 5 10k XNBR 95-111000-V-02 1.60 lbs 0.73 kg VARIABLE BORE RAM FRONT PACKER 2-7/8 to 5 3 5 10k NBR 95-1110000-V-03 27.00 lbs 12.3 kg VARIABLE BORE RAM FRONT PACKER 4-1/2 to 7 3 5 10k NBR 95-1110000-V-04 27.00 lbs 12.3 kg SHEAR BLIND RAM TOP SEALS BLADE PACKER SIDE PARKERS: SHEAR BLIND RAM TOP SEAL 11 3 5 10k XNBR 95-1110000 1.60 lbs 0.73 kg SHEAR BLIND RAM - BLADE PACKER 11 3 5 10k XNBR 95-11100023-BP 3.00 lbs 1.36 kg SHEAR BLIND RAM - SIDE PACKER 01 11 3 5 10k XNBR 95-11100023-SP-01 2.20 lbs 0.99 kg SHEAR BLIND RAM - SIDE PACKER 02 11 3 5 10k XNBR 95-11100023-SP-02 2.20 lbs 0.99 kg

Page 12 of 23 TOP SEAL RAM BOP TOP SEALS & FRONT PACKERS FRONT PACKERS (CSO, Pipe & VBR) 13-5/8 3 5 10K IU (U Style) FRONT PACKERS TOP SEALS Blind Ram Assembly Pipe Ram Assembly VBR Assembly SBR Assembly TOP SEALS: TOP SEAL CSO Thru 9-5/8 3 5 10k XNBR 95-131000 2.00 lbs 0.91 kg FRONT PACKERS: FRONT PACKER CSO 3 5 10k XNBR 95-131002 17.00 lbs 8.62 kg FRONT PACKER 2-3/8 3 5 10k XNBR 95-131-002-2 16.00 lbs 7.26 kg FRONT PACKER 2-7/8 3 5 10k XNBR 95-131002-3 16.00 lbs 7.260 kg FRONT PACKER 3-1/2 3 5 10k XNBR 95-131002-5 19.00 lbs 8.62 kg FRONT PACKER 4 3 5 10k XNBR 95-131002-6 18.80 lbs 8.53 kg FRONT PACKER 4-1/2 3 5 10k XNBR 95-131002-7 18.20 lbs 8.26 kg FRONT PACKER 5 3 5 10k XNBR 95-131002-8 17.00 lbs 7.71 kg FRONT PACKER 5-1/2 3 5 10k XNBR 95-131002-9 16.60 lbs 7.53 kg FRONT PACKER 6-5/8 3 5 10k XNBR 95-131002-10 17.00 lbs 7.71 kg FRONT PACKER 7 3 5 10k XNBR 95-131002-11 20.60 lbs 9.34 kg FRONT PACKER 7-5/8 3 5 10k XNBR 95-131002-12 19.40 lbs 8.80 kg FRONT PACKER 8-5/8 3 5 10k XNBR 95-131002-13 14.90 lbs 8.11 kg FRONT PACKER 9-5/8 3 5 10k XNBR 95-131002-14 12.80 lbs 5.80 kg VARIABLE BORE RAM TOP SEALS AND FRONT PACKERS: VARIABLE BORE RAM TOP SEAL 2-7/8 to 5 4-1/2 TO 7 3 5 10k XNBR 95-131000-V-03 2.00 lbs 0.91 kg VARIABLE BORE RAM FRONT PACKER 2-7/8 to 5 3 5 10k NBR 95-131000-V-02 35.00 lbs 15.9 kg VARIABLE BORE RAM FRONT PACKER 4-1/2 to 7 3 5 10k NBR 95-131000-V-04 35.00 lbs 15.9 kg SHEAR BLIND RAM TOP SEALS BLADE PACKER SIDE PARKERS: SHEAR BLIND RAM TOP SEAL 13-5/8 3 5 10k XNBR 95-1310000 2.00 lbs 0.91 kg SHEAR BLIND RAM - BLADE PACKER 13-5/8 3 5 10k XNBR 95-13100023-BP 3.80 lbs 1.70 kg SHEAR BLIND RAM - SIDE PACKER 01 13-5/8 3 5 10k XNBR 95-13100023-SP-01 2.80 lbs 1.27 kg SHEAR BLIND RAM - SIDE PACKER 02 13-5/8 3 5 10k XNBR 95-13100023-SP-02 2.80 lbs 1.27 kg

Page 13 of 23 INTEGRATED STRIPER FRONT PACKERS STRIPPER FRONT PACKERS AND INSERTS 7-1/16 3 5 10 15K IU (U Style) STRIPPER FRONT PACKERS INSERTS INTEGRATED INSERTS STRIPPER FRONT PACKERS: FRONT PACKER 2-3/8 3 5 10 15k XNBR 70-0703-00017 6.00 lbs 2.72 kg FRONT PACKER 2-7/8 3 5 10 15k XNBR 70-0703-00018 5.80 lbs 2.63 kg FRONT PACKER 3-1/2 3 5 10 15k XNBR 70-0703-00019 5.40 lbs 2.45 kg INSERTS: INSERT 2-3/8 - UHMW 70-0703-00023 0.25 lbs 0.11 kg INSERT 2-7/8 - UHMW 70-0703-00024 0.25 lbs 0.11 kg INSERT 3-1/2 - UHMW 70-0703-00025 0.25 lbs 0.11 kg

Page 14 of 23 INTEGRATED CARDED SEAL KIT SEAL KITS RAM SEAL KIT (Per Cavity) INTEGRATED CARDED SEAL KIT Description Size Size Pressure Product Code Weight Per Unit 7-1/16 5M IE Hydraulic Ram Seal Kit 7-1/16 5k 70-102-041K 3.00 lbs 1.36 kg 7-1/16 5M T81 Hydraulic Ram Seal Kit 7-1/16 5k 70-TH8100 (TH8100) 3.00 lbs 1.36 kg 7-1/16 5M T81 Manual Ram Seal Kit 7-1/16 5k 70-TM8100 (TM8100) 2.20 lbs 1.00 kg 7-1/16 5M LWS Ram Seal Kit 7-1/16 5k 82-880000 10.20 lbs 4.63 kg 7-1/16 3M-15M IU Ram Standard Seal Kit 7-1/16 3 5 10 15K 95-07644909-01-CRK 6.50 lbs 2.95 kg 7-1/16 3M-15M IU Ram Large Bore Seal Kit 7-1/16 3 5 10 15K 95-07644860-LB 8.00 lbs 3.63 kg 7-1/16 3M-15M IU Ram Tandem Boosters Seal Kit 7-1/16 3 5 10 15K 95-0702232403-01-8.00 lbs 3.63 kg 9 3M IWP Ram Seal Kit 9 3K 70-102-040 3.40 lbs 1.54 kg 11 3M IWS Ram Seal Kit 11 3K 82-880001 20.00 lbs 9.07 kg 11 5M IWS Ram Seal Kit 11 5K 82-881100 22.00 lbs 9.98 kg 11 5M IWS IWP Ram Seal Kit 11 5K 70-102-042 11.00 lbs 5.00 kg 11 3M-10M IU Ram Standard Seal Kit 11 3 5 10K 95-116449092-CRK 10.00 lbs 4.54 kg 11 3M-10M IU Ram Large Bore Seal Kit 11 3 5 10K 95-11644860-LB 14.00 lbs 6.35 kg 11 3M-10M IU Ram Tandem Boosters Seal Kit 11 3 5 10K 95-11132164148-TB 10.00 lbs 4.54 kg 13-5/8 5M IWS Ram Seal Kit 13-5/8 5K 82-80011 22.00 lbs 9.98 kg 13-5/8 3M-10M IU Ram Standard Seal Kit 13-5/8 3 5 10K 95-13644909-2-CRK 14.00 lbs 6.35 kg 13-5/8 3M-10M IU Ram Large Bore Seal Kit 13-5/8 3 5 10K 95-13644860-LB 18.00 lbs 8.16 kg 13-5/8 3M-10M IU Ram Tandem Boosters Seal Kit 13-5/8 3 5 10K 95-11132164148-TB 10.00 lbs 4.54 kg

Page 15 of 23 INTEGRATED CARDED SEAL KIT SEAL KITS ANNULAR SEAL KIT INTEGRATED CARDED SEAL KIT ISA SPHERICAL ANNULAR SEAL KITS Description Size Size Pressure Product Code Weight Per Unit 7-1/16 5M Spherical Annular ISA Seal Kit 7-1/16 5k 82-221-55079 7.00 lbs 3.18 kg 7-1/16 5M Spherical Annular ISA Seal Kit w/wear Band 7-1/16 5k 82-221-55079-WB 10.00 lbs 4.54 kg 9 3M Spherical Annular ISA Seal Kit 9 5k 82-221-55077 7.00 lbs 3.18 kg 9 3M Spherical Annular ISA Seal Kit w/wear Band 9 5k 82-221-55077-WB 10.00 lbs 4.54 kg 11 3M Spherical Annular ISA Seal Kit 11 3k 82-221-55075 13.00 lbs 5.90 kg 11 3M Spherical Annular ISA Seal Kit w/wear Band 11 3k 82-221-55075-WB 15.00 lbs 6.80 kg 11 5M Spherical Annular ISA Seal Kit 11 5k 82-221-55030 14.00 lbs 6.35 kg 11 5M Spherical Annular ISA Seal Kit w/wear Band 11 5k 82-221-55030-WB 16.00 lbs 7.26 kg 13-5/8 5M Spherical Annular ISA Seal Kit 13-5/8 5k 82-221-55070 20.00 lbs 9.07 kg 13-5/8 5M Spherical Annular ISA Seal Kit w/wear Band 13-5/8 5k 82-221-55070-WB 23.00 lbs 10.43 kg 21-1/4 2M Spherical Annular ISA Seal Kit 21-1/4 2k 82-221-55067 28.00 lbs 12.70 kg 21-1/4 2M Spherical Annular ISA Seal Kit w/wear Band 21-1/4 2k 82-221-55067-WB 31.00 lbs 14.06 kg IK GK ANNULAR SEAL KITS Description Size Size Pressure Product Code Weight Per Unit 7-1/16 5M Annular IK Seal Kit 7-1/16 5k 82-200-50684 12.00 lbs 5.44 kg 11 5M Annular IK Seal Kit 11 5k 82-200-50688 16.00 lbs 7.26 kg 13-5/8 5M Annular IK Seal Kit 13-5/8 5k 82-200-50690 19.00 lbs 8.62 kg

Page 16 of 23 INTEGRATED DOOR SEALS DOOR SEALS & WEAR BANDS INTEGRATED DOOR SEALS MISCELLANOUS DOOR SEALS & WEAR BANDS DOOR SEALS Description Size Size Pressure Product Code Weight Per Unit 7-1/16 5M IE Door Seal (O-Ring Style) (442-70) 7-1/16 5k 70-075-00025 00 lbs 00 kg 7-1/16 5M IE Door Seal High Temperature (O-Ring Style) 7-1/16 5k 70-072-00026 00 lbs 00 kg 7-1/16 5M IE Door Seal (Molded Style) 7-1/16 5k 17-110-102 00 lbs 00 kg 7-1/16 5M LWS Door Seal (451-90) 7-1/16 5k 82-030030 00 lbs 00 kg 7-1/16 3M-15M IU Door Seal (Molded Style) 7-1/16 3 5 10 15K 82-190-6012 00 lbs 00 kg 9 3M IWP Door Seal (451-90) 9 3k 17-100-100 00 lbs 00 kg 11 3M IWS Door Seal (457-90) 11 3k 70-02110320514 00 lbs 00 kg 11 5M IWS Door Seal (460-90) 11 5k 70-02110520514 00 lbs 00 kg 11 5M IWS IWP - RS Door Seal (Molded Style) 11 5k 70-400-018 00 lbs 00 kg 11 3M-10M IU Door Seal (Molded Style) 11 3 5 10k 82-906-013 00 lbs 00 kg 13-5/8 5M IWS Door Seal (460-90) 13-5/8 5k 82-134014 00 lbs 00 kg 13-5/8 5M IWS IWP - RS Door Seal (Molded Style) 13-5/8 5k 00 lbs 00 kg 13-5/8 3M-10M IU Door Seal (Molded Style) 13-5/8 3 5 10k 17-080-067 00 lbs 00 kg WEAR BAND Description Size Size Pressure Product Code Weight Per Unit 1 Wear Band x.093 (per inch) For Ram & Annulars - - 95-05110520172 00 lbs 00 kg 1 Wear Band x.125 (per foot) for Ram & Annulars - - 95-49223-1000 00 lbs 00 kg 5 Wear Ban x.093 (per inch) for Annulars - - 95-05110520180 00 lbs 00 kg 5 Wear Band x.125 (per foot) for Ram & Annulars - - 95-49223-0500 00 lbs 00 kg

Page 17 of 23 INTEGRATED DIAPHRAGMS K STYLE IP STYLE EMSCO STYLE PULSATION DAMPENER DIAPHRAGMS INTEGRATED PPD & DPD PULSATION DAMPENERS PULSATION DAMPENER DIAPHRAGMS PPD (Production Pulsation Dampener Diaphragms) Description Size Material Product Code Weight Per Unit 1 Gallon PPD Diaphragm 1 gal NBR 73-011004 4.00 lbs 1.80 kg 1 Gallon PPD Diaphragm 1 gal HNBR 73-012004 4.00 lbs 1.80 kg 1 Gallon PPD Diaphragm 1 gal Urethane 73-013004 4.00 lbs 1.80 kg 2.5 Gallon PPD Diaphragm 2.5 gal NBR 73-251004 7.00 lbs 3.20 kg 2.5 Gallon PPD Diaphragm 2.5 gal HNBR 73-252004 7.00 lbs 3.20 kg 2.5 Gallon PPD Diaphragm 2.5 gal Urethane 73-253004 7.00 lbs 3.20 kg 5 Gallon PPD Diaphragm 5 gal NBR 73-051004 10.00 lbs 4.50 kg 5 Gallon PPD Diaphragm 5 gal HNBR 73-052004 10.00 lbs 4.50 kg 5 Gallon PPD Diaphragm 5gal Urethane 73-053005 10.00 lbs 4.50 kg PPD (Production Pulsation Dampener Diaphragms) DPD (Drilling Pulsation Dampener Diaphragms) Description Size Material Product Code Weight Per Unit 10 Gallon PPD Diaphragm 10 gal NBR 73-101004 17.00 lbs 7.70 kg 10 Gallon PPD Diaphragm 10 gal HNBR 73-102004 17.00 lbs 7.70 kg 10 Gallon PPD Diaphragm 10 gal Urethane 70-203004 17.00 lbs 7.70 kg 20 Gallon PPD Diaphragm 20 gal NBR 73-201004 28.00 lbs 12.70 kg 20 Gallon PPD Diaphragm 20 gal HNBR 73-202004 28.00 lbs 12.70 kg 20 Gallon PPD Diaphragm 20 gal Urethane 73-203004 28.00 lbs 12.70 kg EMSCO (PD Diaphragms) Description Size Material Product Code Weight Per Unit PD 45 Diaphragm 10 gal NBR 71-6922-4503 16.00 lbs 7.26 kg PD 45 Diaphragm 10 gal HNBR 71-6922-4507 16.00 lbs 7.26 kg PD 45 Diaphragm 10 gal Urethane 71-6922-4509 16.00 lbs 7.26 kg PD 55 Diaphragm 20 gal NBR 71-6922-5503 26.00 lbs 11.80 kg PD 55 Diaphragm 20 gal HNBR 71-6922-5507 26.00 lbs 11.80 kg PD 55 Diaphragm 20 gal Urethane 71-6922-5509 26.00 lbs 11.80 kg PD 55A Diaphragm (w/insert) 20 gal NBR 71-6922-5503A 28.00 lbs 12.70 kg PD 55A Diaphragm (w/insert) 20 gal HNBR 71-6922-5507A 28.00 lbs 12.70 kg PD 55A Diaphragm (w/insert) 20 gal Urethane 71-6922-5509A 28.00 lbs 12.70 kg

Page 18 of 23 PULSATION DAMPENER MISCELLANEOUS ITEMS PD DPD STABILIZER PLATE PUSLATION DAMPENER Miscellaneous Items PD DPD CHARGING HOSE ASSEMBLY PPD (Production Pulsation Dampener): 1 Gallon Description Size Product Code Weight Per Unit 1 Gallon PPD Charging Valve 1 gal 71-210-014 0.25 lbs 0.11 kg 1 Gallon PPD Charging Hose Assembly 1 gal 71-200-021 6.00 lbs 2.72 kg PPD (Production Pulsation Dampener): 2.5 Gallon Description Size Product Code Weight Per Unit 2.5 Gallon PPD Charging Valve 2.5 gal 71-210-014 0.25 lbs 0.11 kg 2.5 Gallon PPD Charging Hose Assembly 2.5 gal 71-200-021 6.00 lbs 2.72 kg PPD (Production Pulsation Dampener): 5 Gallon Description Size Product Code Weight Per Unit 5 Gallon PPD Charging Valve 5 gal 71-210-014 0.25 lbs 0.11 kg 5 Gallon PPD Charging Hose Assembly 5 gal 71-200-021 6.00 lbs 2.72 kg PPD DPD (Production Pulsation Dampener Drilling Pulsation Dampener): 10 Gallon Description Size Product Code Weight Per Unit 10 Gallon DPD Stabilizer Plate 10 gal 73-201005 2.00 lbs 0.91 kg 10 Gallon Bottom Gasket, HSN 10 gal 71-100-002 0.50 lbs 0.23 kg 10 Gallon PPD Charging Valve 10 gal 71-210-014 2.00 lbs 0.91 kg 10 Gallon PPD Charging Hose Assembly 10 gal 71-200-021 6.00 lbs 2.72 kg 10 Gallon DPD Charging Hose Assembly 10 gal 71-200-020 6.00 lbs 2.72 kg PPD DPD (Production Pulsation Dampener Drilling Pulsation Dampener): 20 Gallon Description Size Product Code Weight Per Unit 20 Gallon DPD Stabilizer Plate 20 gal 73-201005 2.00 lbs 0.91 kg 20 Gallon Bottom Gasket, HSN 20 gal 71-100-004 0.50 lbs 0.23 kg 20 Gallon PPD Charging Valve 20 gal 71-210-014 2.00 lbs 0.91 kg 20 Gallon PPD Charging Hose Assembly 20 gal 71-200-021 6.00 lbs 2.72 kg 20 Gallon DPD Charging Hose Assembly 20 gal 71-200-020 6.00 lbs 2.72 kg PD-45 PD-55 PD-55A Description Size Product Code Weight Per Unit PD-45 Charging Valve PD-45 71-6922-402FMAC 3.00 lbs 1.36 kg PD-45 Charging Hose Assembly PD-45 71-6922-040 6.00 lbs 2.72 kg Description Size Product Code Weight Per Unit PD-55 Charging Valve PD-55 71-6922-402FMAC 3.00 lbs 1.36 kg PD-55 Charging Hose Assembly PD-55 71-6922-040 6.00 lbs 2.72 kg Description Size Product Code Weight Per Unit PD-55A Stabilizer PD-55A 71-6922-0109 5.00 lbs 2.27 kg

Page 19 of 23 PIPE WIPERS INTEGRATED PIPE WIPERS INTEGRATED PIPE WIPER CUTTER PIPE WIPERS PIPE WIPERS & CUTTER ASSEMBLY: Standard Material Black is NR Red is NR-NBR Description Size Size Color Product Code Weight Per Unit 9 OD Lo-Profile 9 Black 80-100-TF09T 6.00 lbs 2.70 kg 14 OD Flat 14 Black 80-100-TF14 15.00 lbs 6.80 kg 14 OD Flat 14 Red 80-100-TF14R 15.00 lbs 6.80 kg 14 OD Split Dual 14 Black 80-100-SD14 20.00 lbs 9.10 kg 14 OD Split Dual 14 Red 80-100-SD14R 20.00 lbs 9.10 kg 17 OD Flat 17 Black 80-100-TF17 17.00 lbs 7.70 kg 17 OD Flat 17 Red 80-100-TF17R 17.00 lbs 7.70 kg 17 OD Split Dual 17 Black 80-100-SD17 23.00 lbs 10.50 kg 17 OD Split Dual 17 Red 80-100-SD17R 23.00 lbs 10.50 kg 19 OD Flat 19 Black 80-100-TF19 19.00 lbs 8.60 kg 19 OD Flat 19 Red 80-100-TF19R 19.00 lbs 8.60 kg 19 OD Split Dual 19 Black 80-100-SD19 31.00 lbs 14.10 kg 19 OD Split Dual 19 Red 80-100-SD19R 31.00 lbs 14.10 kg 22 OD Flat 22 Black 80-100-TF22 22.00 lbs 10.00 kg 22 OD Flat 22 Red 80-100-TF22R 22.00 lbs 10.00 kg 22 OD Split Dual 22 Black 80-100-SD22 45.00 lbs 20.40 kg 22 OD Split Dual 22 Red 80-100-SD22R 45.00 lbs 20.40 kg 24 OD Flat 24 Black 80-100-TF24 24.00 lbs 10.90 kg 24 OD Flat 24 Red 80-100-TF24R 24.00 lbs 10.90 kg 24 OD Split Dual 24 Black 80-100-SD24 50.00 lbs 22.70 kg 24 OD Split Dual 24 Red 80-100-SD24R 50.00 lbs 22.70 kg 26 OD Flat 26 Black 80-100-TF26 26.00 lbs 11.80 kg 26 OD Flat 26 Red 80-100-TF26R 26.00 lbs 11.80 kg Pipe Wiper Cutting Assembly - - 81-100-7005A Wiper Cutting Replacement Blade - - 81-100-70055

Page 20 of 23 INTEGRATED TEXAS SHORT HALL STRIPPER RUBBER STRIPPER RUBBERS INTEGRATED DOUBLE E SUCKER ROD RUBBER INTEGRATED WIRELINE OIL SAVER STRIPPER RUBBER TEXAS SHORT HALL STRIPPER RUBBER: Standard Material - XNBR Description Size Size Color Product Code Weight Per Unit Texas Short Hall 2-1/16 Black 80-TSH-175 15.50 lbs 7.03 kg Texas Short Hall 2-3/8 Black 80-TSH-200 15.00 lbs 6.80 kg Texas Short Hall 2-7/8 Black 80-TSH-250 14.00 lbs 6.35 kg Texas Short Hall 3-1/2 Black 80-TSH-300 13.00 lbs 5.90 kg DOUBLE E ROD STRIPPER RUBBER: Standard Material - NBR Description Size Size Color Product Code Weight Per Unit Double E Rod 2-7/8 Black 80-DE-2WR 3.00 lbs 1.37 kg OIL SAVER RUBBERS: Standard Material - NBR Description Size Size Color Product Code Weight Per Unit Oil Saver - Black 80-OSR-BLK 1.00 lbs 0.45 kg Oil Saver - Red 80-OSR-RED 1.00 lbs 0.45 kg Oil Saver - Blue 80-OSR-BUE 1.00 lbs 0.45 kg Oil Saver - Green 80-OSR-GRE 1.00 lbs 0.45 kg

Page 21 of 23 INTEGRATED ELASTOMER MATERIAL DESCRPTION POLYISOPRENE (ASTM D1418 Designation - NR): Natural Rubber features high tensile strength, high resilience, high abrasion and high tear resistance properties, with a good friction surface and excellent adhesion to metals. Until the invention of synthetic elastomers in the 1930 s, Natural Rubber was the only polymer available for O-ring manufacture. Natural Rubber features good resistance to organic acids and alcohols, with moderate resistance to aldehydes. ACRYLONITRILE BUTADIENE POLYMER (ASTM D1418 Designation - NBR): Nitrile rubber (NBR) is the general term for acrylonitrile butadiene copolymer. The acrylonitrile content of nitrile sealing compounds varies considerably (18% to 50%) and influences the physical properties of the finished material. The higher the acrylonitrile content, the better the resistance to oil and fuel. At the same time, elasticity and resistance to compression set is adversely affected. In view of these opposing realities, a compromise is often drawn, and a medium acrylonitrile content selected. NBR has good mechanical properties when compared with other elastomers and high wear resistance. NBR is not resistant to weathering and ozone. CARBOXYLATED ACRYLONITRILE BUTADIENE POLYMER (ASTM D1418 Designation - XNBR): Carboxylated Nitrile is similar to Nitrile rubber, but the polymer backbone has been chemically modified with Carboxylic Acid containing group. This result is XNBR with more excellent abrasion and tear resistance than traditional NBR. HYDROGENATED ACRYLONITRILE BUTADIENE POLYMER (ASTM D1418 Designation - HNBR): HNBR is widely used in oil industry and maintains excellent resistance to motor oils, sour gas, amine/oil mixtures, oxidized fuels, and lubricating oils. HNBR is resistant to mineral oil-based hydraulic fluids, animal and vegetable fats, diesel fuel, ozone, sour gas, dilute acids and bases. It also resists new bio-oils (biological oils). It is suitable for high dynamic loads and has a good abrasion resistance. FLUOROCARBON POLYMER (ASTM D1418 Designation - FKM): FKM has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many organic solvents and chemicals. Low temperature resistance is normally not favorable and for static applications is limited to approximately -26 C (-15 F) although certain compounds are suitable down to -46 C (-50 F). Under dynamic conditions, the lowest service temperature is between -15 C and -18 C (5 F and 0 F). Gas permeability is very low and similar to that of butyl rubber. Special FKM compounds exhibit an improved resistance to acids and fuels. ULTRA HIGH MOLECULAR WEIGHT POLYETHLENE (UHMW): UHMW is a thermoplastic material made up of extremely long chains of polyethylene. The polyethylene chains give the material a high abrasion resistance. Its high wear strength makes it most suitable for applications such as stripping where abrasion is a its most prolific. POLYURETHANE (Urethane): Polyurethane elastomers, as a class, have excellent wear resistance, high tensile strength and high elasticity in comparison with any other elastomers. Permeability is good and comparable with butyl.

Page 22of 23 INTEGRATED ELASTOMER MATERIAL DESCRPTION Application ELASTOMER COMPATIBILITY GUIDE Natural Rubber (NR) Nitrile (NBR) Carboxylated Nitrile (XNBR) Hydrogenated Nitrile (HNBR) Viton (FKM) Intermittent Service - Temperature ( o F) - 65 to 180-40 to 250 0 to 250-40 to 300-40 to 450 Continuous Service - Temperature ( o F) 140 200 225 250 400 Tensile Strength (Psi) Over 3000 Over 2000 Over 3000 Over 3000 Over 1000 Hardness (Shore A) 30-90 40-90 40-90 40-90 40-90 Adhesion to metals Excellent Excellent Good Excellent Fair to Good Adhesion to fabrics Excellent Good Good Good Good Tear Resistance Good Fair Excellent Good Fair to Good Abrasion Resistance Excellent Good Excellent Excellent Good Compression Set Excellent Good Excellent Good Good Resilience - Hot Excellent Fair Good Good Good Resilience - Cold Excellent Fair Good Good Fair Dielectric Strength Excellent Poor Good Good Good Electrical Insulation Good to Excellent Poor Good Good Good Impermeability to Gases Good Excellent Excellent Excellent Excellent Acid Resistance - Dilute Fair to Good Good Good Good Good to Excellent Acid Resistance - Concentrated Fair to Good Good Good Good Excellent Solvent Resistance Aliphatic Hydrocarbons Poor Excellent Excellent Excellent Excellent Solvent Resistance Aromatic Hydrocarbons Poor Good Good Excellent Excellent Solvent Resistance Oxygenated Poor Poor Good Excellent Poor Solvent Resistance Lacquer Poor Fair Good Good Poor Solvent Resistance Lubricating Oils Poor Good Good Excellent Excellent Resistance Oil & Gas Poor Excellent Excellent Excellent Excellent Resistance Water Absorption Good Good Good Good Excellent Resistance - Oxidation Good Good Good Excellent Excellent Resistance - Ozone Poor Poor Poor Excellent Excellent Resistance H2S Poor Poor Fair Fair Good Resistance CO2 Poor Poor Fair Fair Good Resistance Sunlight Aging Poor Poor Good Excellent Excellent Resistance Heat Aging Fair Good Excellent Excellent Excellent Resistance Low Temperature Good Fair Good Good Fair Resistance - Flame Poor Poor Good Good Excellent Resistance Chlorinated Hydrocarbons Poor Fair Poor Good Good to Excellent

Page 23 of 23 INTEGRATED ELASTOMER STORAGE AND AGE CONTROL GUIDLELINES Storage conditions are much more important in determining the useful life of elastomers than is time. ISO 2230:2002 provides guidelines for the storage and for determining the shelf life of vulcanized rubber products. Integrated Elastomer product storage life is dependent on the type Elastomer material and the following factors: TEMPERATURE: - The storage temperature shall be below 77 degree Fahrenheit 25 degree Celsius. HUMIDITY: - All elastomer products shall be stored in moisture proof bags; if not the relative humidity level shall be less than 65%. LIGHT: - All elastomer products shall be stored in UV protectant bags; if not all elastomers must be stored in a UV free environment. RADIATION AND OZONE: - All elastomer products shall be stored in a Radiation & Ozone free environment. DEFORMATION: - All elastomer products shall be stored free from superimposed tensile and compressive stresses or other causes of deformation. CONTACT WITH LIQUID AND POWDER: - All elastomer products shall not come in contact with liquid or powder unless these materials are by design an integral part of the component or Integrated Elastomer s packaging. STRUCTURAL DAMAGE TO PRODUCT: - Permanent deformations (folds, wrinkles or flattening areas) - Mechanical damage (cuts, cracks, worn or dissolved areas) - Changes to the surface (stiffening, softness, stickiness, discoloration or dirtiness ISO 2230 GROUP If the above factors are controlled, the following Shelf Life is allowed: ELASTOMER MATERIAL SHELF LIFE (years) 1 NR, AU, EU, SBR 5 2 NBR, HNBR, ACM, AEM, XNBR, ECO, CIIR, CR, IIR 6 3 FKM, VMQ, EPDM, FVMQ, PVMQ, FFKM, Fluoroprene XP, CSM 7

USA Canada Mexico Colombia Dubai Singapore Australia Bahrain INTEGRATED GLOBAL HEADQUARTERS 5701 Brittmoore Road Houston, Texas 77041 United States of America INTEGRATED MANUFACTURING PLANT 31811 Industrial Park Drive Pinehurst, Texas 77362 United States of America Contact: +713-785-7075 Fax: +713-785-7099 Website: integratedww.com Contact: sales@integratedww.com

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback