Architectural Door Accessories

Architectural Door Accessories Pemko Condensed Catalog

Pemko Condensed Catalog About This condensed catalog is designed to introduce you to some of the Pemko products that are available. There are many Pemko products that are not included in this catalog. Please visit our website www.pemko.com to view the complete product line. Catalogs and other information is available for download. Call Pemko Customer Service at 1-800-824-3018 for additional information and technical service. Contents PemkoHinge Continuous Geared Hinges...3-4 Markar Continuous Hinges...5-6 Commercial Thresholds...7-11 Eco-V Thresholds...12 Modular Ramps... Door Bottoms... 14-17 Acoustic Automatic Door Bottoms...15 Astragals and Meeting Stiles... 17-18 Brush Gasketing... 19-20 Perimeter Gasketing... 21-22 Adhesive Gasketing... 23-24 Acoustic Seal Sets...25 Sliding and Folding Hardware... 26-27 Lites and Louvers...27 Index: PRODUCT PAGE 154SS...9 1571...7 158...7 171...8 1715...9 1717...9 1718...9 172...8 175SS...9 176...8 179_T...11 18041_NB...18, 20 18061_NB...20 18062_NB...20 18100_NB...20 18175_NB...20 18250_NB...20 18400_NB...20 2005_T...11 2006_T...11 2009_PK...11 211_V...16 211_PK...16 215_V...16 215_PK...16 21_V...16 2170_V...16 2173_V...16 22_PK773...16 222_V...16 222_PK...16 225_V...16 225_PK...16 2211_V...16 2211_PK...16 2251_V...16 PRODUCT PAGE 2251_PK...16 234_V...16 234_PK...16 2343_V...16 252X2_FG...10 252X3_FG...10 252x3SSFG...9 252x226_FGT...11 253...7 253X4_FG...10 253SSFG...9 254x226_FGT...11 254X4_FG...10 254x226_FGT...11 2548...8 2555...7 255X5_FG...10 270...8 271...8 2715...9 272...8 273x224_FGT...11 273X3_FG...10 273X4_FG...10 274...7 2749...8 2755...7 279x292_FGPK...11 2891_S...22 2892_V...22 2893_V...22 28945_NB...22 290_PK...22 2902_V...22 2903_V...22 29045_NB...22 PRODUCT PAGE 29310_S...17, 21 293100_NB...20 29324_NB...20 297_S...17, 21 303_S...17, 21 305_N...18 306_V...21 369_P...18 312_R...21 3_N...18 315_N...17 3151_N...17 321_N...17 322_SPK...21 345_NB...17 345_P...17 345_V...17 3452_NB...17 350_SPK...21 350_SR...21 35041_NB...19 35061_NB...19 351_/351_S...18 355_S...18 356_V...18 357_ with S88...18 369_P...18 369_PK...18 369_PK773...18 369_S...18 3692_PK773...16 379_S...21 411_NBL...15 411_RL...15 41_NBL...14 41_RL...14 PRODUCT PAGE 420_PKL...15 4301_NBL...14 4301_RL...14 434_NBL...14 434_RL...14 45041_NB...19 45061_NB...19 45062_NB...19 45100_NB...19 45175_NB...19 45250_NB...19 5025_SB...20 5061_NB...20 566...7 573x5_FG...10 ACP112................ 22 ADJ232V8...12 AM44...23 AM88...23 Bypass Track Series...26 EG308...6 EV232...12 EV2320...12 EV2322...12 EV2325...12 FM...3 FM300...5 FM3500...5 FM900...6 FM_SLF...3 Folding 100 Series...26 FS...4 FS_BP...4 FS_CP...4 HG305...6 HG3505...5 PRODUCT PAGE HS...4 HSS1000....24 HSS2000....24 HSS2000xS44...24 HSS2000xS88...24 LT-B1....27 LV-IY...27 PDB411_E....15 PDB41_E...15 PDL...24 PDLBRKT...24 PK33...24 PK55...24 R.5OS... R.5OSMR.... R.75OSS... R.75OSSMR... R1F... R1FMR... S44...23 S77...23 S771...24 S771x6...24 S772...24 S773...23 S776...23 S88...23 Sliding 200 Series...26 W60...27 WT_FM...4 X25M...3 XF....3 XI...3 XM....3 2

PemkoHinge Continuous Geared Hinges A PemkoHinge consists of two full-height, paired and geared leaves. Each geared leaf rotates evenly from top to bottom riding on proprietary polymer blended bearings. The geared leaves and bearings are held together by a full-length channel cap. This assembly retains the smooth, clean lines of the door and frame, while easily supporting heavy vertical loads. Electrical Modifications: The cycle performance of the electrically modified hinge has been vastly improved. Performance testing has shown that 3,000,000+ cycles can now be achieved using Pemko s exclusive polyurethane-coated 4, 8, or 12 TRI-FLEX titanium copper alloy cables. Each cable is capable of carrying 6 amps continuous or 16 amps in-rush @ 24-volts for 820 milliseconds.. When ordering, please use the shorthand code. For example, if you require a Clear Anodized heavy-duty Full-Mortise hinge at 83" with Quick Connect transfer - 4-wire, modified 36 1 /4" from the top, right hand, you would order a CFM83HD1 x QC4 @ 36 1 /4" - RH. Serviceable/Removable (SER) Module: The hinge is furnished to be installed in three sections allowing the current carrying cable to be serviced or replaced without removing the door from the frame. Additionally, the SER option allows the current carrying cables to be safely stored or delivered to the electrician or security contractor prior to the installation of the electrified hardware, eliminating the necessity of the electrician or security contractor being present when the doors are being hung. Pemko Condensed Catalog Full-Mortise Hinges - Standard Full-Mortise units are designed mainly for new door applications and are applied to conceal both leaves Full-Mortise Hinges - Short Leaf Flush/Inset Designed for use with doors which range between 1 3 /4" to 2 1 /4" Designed for bifold applications to keep the faces of the doors flush Standard _FM_ BL,, PW, SN 27 (21.4) Short Leaf Flush 27 _FM_SLF BL,, PW, SN (21.4) Full Mortise XM_ C, D 27 (21.4) Short Leaf Flush XF_ C, D, 27 (21.4) Full Mortise X25M_ C, D 23 32 (18.3) 2 17 32 (64.3) 27 32 (21.4) 2 1 2 (63.5) Short Leaf Inset XI_ C, D, 3 8 (9.5) MIN FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) C (Clear Anodized) D (Dark Bronze Anodized) G (Gold Anodized) SN (Satin Nickel Anodized) BL (Black Anodized) and PW (Painted White) are special finishes available upon request. 3

Pemko Condensed Catalog PemkoHinge Continuous Geared Hinges (Cont.) Full-Mortise Hinges - Wide Throw Wide Throw Full-Mortise units are designed mainly for new door applications that require extra clearance due to special frame, door or wall design, and are applied to conceal both leaves More clearance between the door and frame allows your door to open 180 Available only in heavy duty to support larger doors Wide Throw WT_FM_ JAMB 25 32 (19.8) 1 5 8 (41.3) Half-Surface Hinges - Standard Half-Surface units are designed mainly for retrofit work and are applied to the exposed surface of the door and the frame rabbet Designed for use with hollow metal frames, where the inset conforms to S.D.I. specifications for aligning doors and frames Designed for retrofit applications. Allows for adjustments in order to properly align edge of the door to the frame Half Surface _HS_ BL,, PW, SN 23 32 (18.3) JAMB 25 32 (19.8) 2 (50.8) 11 32 (8.7) DOOR 111 16 1 3 4 (42.9) (44.5) 1 8 (3.2) MIN DOOR 5/16 SQUARE EDGE DOOR 3/8 BEVELED EDGE DOOR Full-Surface Hinges - Standard Full-Surface units are designed mainly for retrofit work and are applied to the exposed surfaces of the door and frame Full Surface _FS_ BL,, PW, SN Full-Surface Hinges - Center Pivot Full-Surface Center Pivot units are designed mainly for retrofit work and are applied to the exposed surfaces of the door and frame Full-Surface Center Pivot units easily replace butt hinges since no door or frame adjustments are necessary and are more versatile with restricted frame faces Center Pivot _FS_CP BL,, PW, SN Full-Surface Hinges - Balanced Pivot Allows for easy replacement from butt hinges as the pivot point remains the same No template adjustments are needed for existing door opening/closing devices Full Surface _FS_BP BL, C, D, PW, SN 16 (20.6) 17 16 (36.5) 2 (50.8) JAMB 1 16 (1.6) MIN 25 32 (19.8) 17 16 (36.5) 2 (50.8) DOOR Equal length leaves provide an aesthetic appearance Good in a bi-fold application where two doors need to be hinged FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) C (Clear Anodized) D (Dark Bronze Anodized) G (Gold Anodized) BL (Black Anodized) PW (Painted White) and SN (Satin Nickel Anodized) are special finishes available upon request. 4

Fax: 800 243-3656 www.markar.com Markar Architectural Products, 4226 Transport Street, Ventura, CA 93003 Phone: 800 824-3018 Fax: 800 243-3656 www.markar.com Markar Architectural Products, 4226 Transport Street, Ventura, CA 93003 Phone: 800 824-3018 Fax: 800 243-3656 www.markar.com Markar Continuous Hinges Why Continuous Hinges? Did you know that on a door with traditional butt hinges, 70% of the door weight is on the top hinge? The top hinge also bears the brunt of abuse when doors are opened beyond the stop device, resulting in kickback shock and eventual failure of the hinge and damage to the frame. This is why continuous hinges are recommended for heavy doors and for situations where doors are exposed to misuse. Pemko Condensed Catalog Most door and frame stress is put on the top of conventional hinge systems. A continuous hinge spreads the stress along the full length of the door and frame. Continuous hinges reduce the factors leading to hinge failure by distributing weight evenly so wear and tear to the frame and door is reduced significantly. In addition, continuous hinges: Increase security and reduce vandalism by preventing insertion of devices between the door and frame Ease installation by providing simple alignment of electrical transfers and of monitoring switches Reduces air infiltration by creating a complete seal from top to bottom of the door at the hinge jamb There are over 75 different Markar hinge models to choose from offering a variety of configurations, options, and materials. Markar FM3500 Edge Mount Security Hinge This edge mount pin and barrel type hinge is fabricated with extra-heavy duty components for use on high traffic, high abuse doors. The hinge is specially designed and well suited for correctional facilities and other high security locations using up to 2 1 / 4" thick swing-type doors. Prison doors, gates, extremely tall doors and extra heavy doors are all good candidates for Markar s 3500 Security Hinge. Markar FM300 Edge Mount Hinge This edge-mounted pin & barrel hinge is used on many of today s high traffic, high abuse doors. The hinge works well in locations that would normally call out for anchor hinges, pivot reinforcement hinges or thrust pivot unit and hinge sets. This hinge saves on special door and frame preparation charges and makes the installer s job easier. It can be used on both fire labeled and non-labeled openings. Markar HG3505 Adjustable Hinge Guard The integral hinge guard protects the door from dings and gouges from carts and gurneys while providing clean lines and aesthetic appearance. Our HG products also have fire ratings up to and including 3 hours. Markar 1/4 6 MIN. HINGE CLEARANCE Markar 3/4 19 Markar Architectural Products, 4226 Transport Street, Ventura, CA 93003 Phone: 800 824-3018 3/8 10 3/4 3/4 1 3/4 19 44 19 3/4 19 5/8 16 3/8 10 5/16" 8 MIN. HINGE CLEARANCE 5/8 16 5/16 8 3/4 MIN. HINGE 19 CLEARANCE (NON-ADJUSTABLE) /16 21 CLOSED 1/16 2 7/8 22 1 15/16 49 1 15/16 49 OPEN 180 1 1/4 32 EDGE MOUNT HINGE, STAINLESS STEEL, 14 GA. 07/14/2014 FM300 CATALOG DRAWING Rev. A CLOSED CLOSED 1/16 2 CLOSED Door Closed Door Open 180 EDGE MOUNT HINGE, STAINLESS STEEL, 12 GA. 07/10/2014 FM3500 CATALOG DRAWING Rev. A 3/4 1 3/4 19 44 1/16 2 3/4 1 3/4 19 44 ADJUSTABLE HINGE GUARD, STAINLESS STEEL, 12 GA. HG3505 CATALOG DRAWING 7/8 22 1 15/16 49 1 15/16 1 1/4 49 32 1 15/16 49 OPEN 180 Door Closed Door Open 180 1/16 5/16 2 Markar 8 ADJUSTABLE HINGE GUARD, STAINLESS STEEL, 12 GA. MIN. HINGE CLEARANCE HG3505 CATALOG DRAWING (NON-ADJUSTABLE) /16 21 3/4 19 1 3/4 44 7/8 22 OPEN 180 OPEN 180 Door Closed Door Open 180 07//2014 Rev. B 5 7/14/2014 FM300 CATALOG.SLDDRW 07//2014 Rev. B

Pemko Condensed Catalog Markar Continuous Hinges (Cont.) Markar HG305 Adjustable Hinge Guard The integral hinge guard protects the door from dings and gouges from carts and gurneys while providing clean lines and aesthetic appearance. Our HG products also have fire ratings up to and including 3 hours. Not only that, but the wraparound edge guard protects the door from unsightly dents and gouges and will deflect objects, preventing further damage. Markar EG308 Adjustable Edge Guard 3/4 19 3/8 10 5/16 8 MIN. HINGE CLEARANCE (NON-ADJUSTABLE) 3/4 18 1/16 2 3/4 19 1 3/4 44 /16 20 1 15/16 49 CLOSED OPEN 180 Door Closed Door Open 180 ADJUSTABLE HINGE GUARD, STAINLESS STEEL, 14 GA. HG305 CATALOG DRAWING 07/15/2014 Rev. E This fire-labeled edge guard is used in conjunction 3/4 19 with the HG305 Hinge/Guard for a balanced aesthetic look. It also provides protection for the leading edge of the door. 86 3/4 19 89 1 3/4 44 1 3/4 44 7/8 22 91 7/8 22 89 1/16 2 MIN. EG CLEARANCE (NON-ADJUSTABLE) 1/16 2 MIN. EG CLEARANCE (NON-ADJUSTABLE) BEVELED Square edge door SQUARE Markar Architectural Products, Markar 4226 Transport Street, ADJUSTABLE DOUBLE RETURN EDGE GUARD, STAINLESS STEEL, 16 GA. 07/17/2014 Ventura, CA 93003 Phone: 800 824-3018 Fax: 800 243-3656 Markar FM900 www.markar.com Edge EG308 CATALOG Mount DRAWING Rev. A Ideal for damp or corrosive environments, Markar s stainless steel toilet partition hinge adds years of life to your high-quality partition. Markar Markar 3/4 19 3/4 19 1/4 6 MIN. 1/4 HINGE CLEARANCE 6 MIN. HINGE CLEARANCE Markar Architectural Products, 4226 Transport Street, Ventura, CA 93003 Phone: 800 824-3018 Fax: 800 243-3656 www.markar.com Markar Architectural Products, 4226 Transport Street, Ventura, CA 93003 Phone: 800 824-3018 Fax: 800 243-3656 www.markar.com 1 3/4 3/4 44 19 1 3/4 3/4 44 19 2 3/8 60 2 3/8 60 CLOSED Door Closed Door OPEN Open 90 EDGE CLOSED MOUNT TOILET PARTITION HINGE, STAINLESS STEEL, 14 GA. OPEN 90 FM900 CATALOG DRAWING EDGE MOUNT TOILET PARTITION HINGE, STAINLESS STEEL, 14 GA. FM900 CATALOG DRAWING 07/2014 Rev. B 07/2014 Rev. B 6

Commercial Thresholds Half Saddle Thresholds See full line catalog or website for full half saddle product offering 274_ A, B, D, G ANSI (aluminum): J33100, J330, J333 ANSI (brass): J100, J0, J3 Pemko Condensed Catalog 2755_ ANSI (aluminum): J33100 1 4 (6.4) 253_ A, B, D, G ANSI (aluminum): J33100, J330 ANSI (brass): J100, J0 2555_ ANSI (aluminum): J33100 566_ A, D ANSI (aluminum): J33100, J330 Offset Half Saddle 1 2 (12.7) 1 (25.4) 5 (127.0) * 2555_ can be combined with other half saddles on one or both sides. If combined only on one side, the opposite side should be mounted flush with an existing offset. Either stated application is required for this to be ADA-compliant. 3 (76.2) 766_ A, D ANSI (aluminum): J33100, J330 Offset Half Saddle 1 2 (12.7) 3 (76.2) Offset Saddles 158_ ANSI (aluminum): J32100, J320, J328, J32180 1571_ A, D ANSI (aluminum): J32100, J32180, J33100 1 3 (25.4) 4 (19.1) 1 4 (6.4) 6 1 4 (158.8) FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finished Aluminum) B (Mill Finish Architectural Bronze [Brass]) D (Dark Bronze Anodized) G (Gold Anodized) BL (Black Anodized) and PW (Painted White) are special finishes available upon request. 7

Pemko Condensed Catalog Commercial Thresholds (Cont.) Unless exact net cut is specified, thresholds less than 48" are supplied 1 /2" over length, and thresholds 48" and over are supplied 1" over length to allow for fitting. Unless otherwise specified, all thresholds are pre-drilled on the center line and are supplied with fasteners. Thresholds 8" in width or greater are supplied with two rows of fastener holes. For corrosive environments, stainless steel screws are available at an extra cost. Available with PemKote non-skid coating. Please specify PemKote when ordering. Please furnish drilling instructions when ordering with PemKote as it is difficult to drill through. Saddle Thresholds 171_ A, B, BDG, D, G, SN 172_ A, B, D, G, SN 176_ A, B, D, G 270_ A, B, D, G 271_ A, B, D, G, SN 272_ A, B, D, G, SN 2548_ 2748_ 2749_ 8 FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finished Aluminum) B (Mill Finish Architectural Bronze [Brass]) BDG (Bright Dip Gold Anodized) D (Dark Bronze Anodized) G (Gold Anodized) SN (Satin Nickel Anodized) BL (Black Anodized) and PW (Painted White) are special finishes available upon request.

Commercial Thresholds (Cont.) Stainless Steel Saddle Thresholds 11ga 430 Stainless Steel with #4 Brushed Finish Stainless Steel Thresholds are available in 36", 48", 72", 96" and 120" lengths only. 154SS SS (#4 Finish) Pemko Condensed Catalog 175SS SS (#4 Finish) 253SSFG SS (#4 Finish) 1 2 (12.7) 3 1 16 (77.8) 252x3SSFG SS (#4 Finish) 1 2 (12.7) Heavy Duty Thresholds Ideal for heavy-duty, high-traffic and high weight-bearing applications, such as industrial facilities, schools, cafeterias, manufacturing buildings and hospitals Withstands coastal and high-humidity conditions Ultra-durable, extra thick extruded nickel-aluminum construction is guaranteed for ten (10) years 1715_ A, AK, D 5 (127.0) 2715_ A, AK, D 1 4 (6.4) Modular Heavy Duty Thresholds Modular construction without the expense of custom cast thresholds. Available in incremental width additions to accommodate a variety of applications (in 1" increments) 1717_ A, AK, D Allow 5 /8" door clearance. 5 (127.0) All items on this page are available with PemKote non-slip coating (see General Information section). Please specify PemKote when ordering. Please furnish drilling instructions when ordering PemKote as it is difficult to drill through this coating. 1718_ A, AK, D Allow 5 /8" door clearance. FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum), AK (Pemkote Aluminum), D (Dark Bronze Anodized), SS (see individual part) 9

Pemko Condensed Catalog Commercial Thresholds (Cont.) Thermal Barrier Saddles Black rigid polypropylene key between extrusions provides a thermal barrier (designated by FG Frost Guard following finish code) 273x3_FG A, B, D, G 273x4_FG A, B, D, G 254x4_FG A, B, D, G 255x5_FG A, B, D, G 252x2_FG A, B, D, G 252x3_FG A, B, D, G 253x4_FG A, B, D, G Flexible Threshold Flexible PemkoPrene joint allows threshold to bend up to 20-degrees in either direction Joint design allows for width to extend up to 1/4" Designed for a variety of applications (i.e. ramp, expansion joint cover, etc) 573x5_FG A, D 1 4 (6.4) 1 10 4 (260.4) 0-1 4 (6.4) Flexible Joint 10 FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum), B (Mill Finish Bronze [Brass]), D (Dark Bronze Anodized), G (Gold Anodized)

Commercial Thresholds (Cont.) Latching Panic Exit Saddle Thresholds Used in conjunction with surface applied vertical rod exit device, or as a stop and a seal at the bottom of a door. Also available with Eco-V or Pile Seals; test ratings vary. Please see full line catalog or web. 2005_T A, B, D, G Allow 3 /8" door clearance. Pemko Condensed Catalog 2006_T Allow 3 /8" door clearance. ADA compliant when butted to another flooring surface 1 /4" or higher. OFFSET 179_T A, B, D, G Allow 1 /2" door clearance. 2009_PK A, D Allow 3 / 8 " door clearance. 1 4 (6.4) PemkoPrene (PK) 1 2 (12.7) 1 5 8 (41.3) 1 2 (12.7) Latching Panic Exit Saddle Thresholds - Thermal Barrier Black rigid polypropylene key between extrusions provides thermal barrier (designated by FG Frost Guard following finish code) Used in conjunction with surface-applied vertical rod exit device, or as a stop and a seal at the bottom of door These units are not welded 252x226_FGT A, B, D, G Allow 5 / 8 " door clearance. 254x226_FGT A, B, D, G Allow 5 /8" door clearance. ALTERNATE INSERTS 252x226_FGP 254x226_FGP 273x224_FGT 273x224_FGT 252x226_FGV 254x226_FGV 273x224_FGT Eco-V 279x292_FGPK A, D 1 4 PemkoPrene (PK) 1 2 (12.7) 15 8 (41.3) 1 2 (12.7) (6.4) FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum) B (Mill Finish Extruded Bronze [Brass]) D (Dark Bronze Anodized) G (Gold Anodized) NOTE: G is available with limited inventory 4 1 4 (108.0) 11

Pemko Condensed Catalog Commercial Thresholds (Cont.) Eco-V Thresholds Eco-V thresholds create an ideal transition where two different pieces of carpet meet or carpet meets another surface under a door Ideal for use in any high-traffic commercial installation, such as hotels and offices Eco-V thresholds are manufactured of slightly softer material than competitive products. This aids in the cutting and fitting of the threshold and facilitates easier insertion of the carpet into the holding cavities on the carpet side(s) of the threshold Eco-V thresholds are designed to work in conjunction with Pemko's 2173_V and 2343_V door shoes EV232_, EV2325_ and ADJ232V thresholds have been tested and approved under ADAAG-2010 (Amended); ICC/ANSI A117.1 and California Building Code, Title 24 for Barrier-Free Entry EV232 COLORS: BL, D LENGTHS: 36", 48", 73" Serves as a transition where two pieces of carpet meet beneath an interior door. EV2320_ COLORS: BL LENGTHS: 36", 48", 73" Serves as a transition where carpet meets concrete beneath an interior or exterior door. EV2325_ COLORS: BL, D LENGTHS: 36", 48", 73" Serves as a transition where carpet meets tile beneath an interior door. EV2322_ COLORS: BL LENGTHS: 36", 48", 73" Serves as a transition where carpet meets tile beneath an interior door. Adjustable Assembly Thresholds ADJ232V8_ BL, D LENGTHS: 36", 48", 73" FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) BL (Black) D (Dark Brown) 12

Modular Ramps How To Order Assemblies accommodate 1 /2" to 2 1 /4" floor offsets in meeting the 1:12 slope requirements of the Americans with Disabilities Act. Even higher offsets can be accommodated by using the risers, RAMP_ and RAMP14_ MR in a product number denotes that one-pair of miter returns (and one-pair of miter return extenders, if applicable) are included. Otherwise, we recommend filling and feathering the threshold ends with grout. Do not leave threshold ends open Miter Returns are available for offsets up to 2 1 /4". Larger offsets will require filling with additional material (not supplied) at the points where the offset is larger than 2 1 /4". Assemblies are supplied with #10 stainless steel wood screws. Stainless steel machine screws and expansion shields are available at an extra cost Assemblies allow for custom fabrication (i.e. notching); please consult Pemko Customer Service Assemblies are provided NET length Modular Ramp Threshold Assemblies - Flush Applications R1F_ R1FMR_ A, AK Pemko Condensed Catalog Modular Ramp Threshold Assemblies Offset Applications (7" Top Plate) R.5OS_ R.5OSMR_ A, AK Modular Ramp Threshold Assemblies Offset Applications (3 1 /2" Top Plate) R.75OSS_ R.75OSSMR_ A, AK Recycled Rubber Ramp Assembly PART # WIDTH A WIDTH B (door opening) (total width) RR1.25FMR36 36" 41" RR1.25FMR48 48" 53" RR1.25FMR60 60" 65" RR1.25FMR72 72" 77" RR1.25FMR96 96" 101" 1 12 WIDTH B WIDTH A 12 1 1 4 WIDTH B (31.8) WIDTH A 22 R.1/4 FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum) AK (Mill Finish Aluminum with Pemkote Non-Slip Coating)

Pemko Condensed Catalog Door Bottoms Automatic Door Bottoms Self-leveling design; drop leads on plunger side and then levels out across its length across door length Adjusts between 1 / 8 " and 3 / 4 ". Maximum dimension between door bottom rail and floor surface is 3 / 4 ". 41_RL BDG, C, D, SN 41_NBL BDG, C, D, SN 4301_RL C, D SURFACE MOUNTED SEMI- MORTISED SURFACE MOUNTED SEMI- MORTISED SURFACE MOUNTED SEMI- MORTISED 127 32 (46.8) 127 32 (46.8) 125 32 (46.0) 29 32 19 32 (15.1) sponge EPDM (R) 19 32 (15.1) nylon brush (NB) ALTERNATE INSERTS FOR 41 41_PKL 41_SL BDG, C, D, SN BDG, C, D, SN (23.8) sponge EPDM (R) ALTERNATE INSERT FOR 4301 4301_PKL C, D PemkoPrene (PK) 4301_NBL C, D, 434_NBL A 434_RL A SURFACE MOUNTED SEMI- MORTISED 27 32 (21.4) 7 8 (22.2) 125 32 (45.2) 111 32 (34.) 111 32 (34.1) nylon brush (NB) sponge EPDM (R) 29 32 (23.0) nylon brush (NB) ALTERNATE INSERT FOR 434 434_PKL FINISH: A PemkoPrene (PK) FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum) BDG (Bright Dip Gold Anodized) C (Clear Anodized) D (Dark Bronze Anodized) SN (Satin Nickel Anodized). Special finishes available upon request. 14

Door Bottoms (Cont.) Automatic Door Bottoms Adjusts between 1 / 8 " and 3 / 4 ". Maximum dimension between door bottom rail and floor surface is 3 / 4 " except where noted. 411_RL A 411_NBL A 420_PKL A For hollow metal doors. Maximum drop is ". Pemko Condensed Catalog sponge EPDM (R) nylon brush (NB) 411_PKL ALTERNATE INSERTS FOR 411 411_SL ALTERNATE INSERTS FOR 420 420_VL Eco-V 420_SL Acoustic Automatic Door Bottoms: PDB Series Unique design creates uniform seal pressure across the entire door bottom resulting in superior acoustic performance PDB Series has sealed-in-place type performance, achieving zero decible drop in STC ratings in many typical wood and hollow metal door applications. US Patent No 8,925,250 B2 Bar adjustment is 1/8" to ". Maximum dimension from bottom of door to sealing surface is " PDB411_E A PDB41_E C, D 9 16 (14.3) SURFACE MOUNTED SEMI- MORTISED 1 3 8 (34.9) 1 7 8 (47.6) PemkoPrene (E) 9 16 (14.3) PemkoPrene (E) 15

Pemko Condensed Catalog Door Bottoms (Cont.) Door Shoes Where door bottoms are noted with both PemkoPrene (PK) and Eco-V (V) seals, these options have the same profile Slotted holes for easy adjustment Rain drip model is ideal for deflecting rain away from the bottom of door 211_V 211_PK 215_V 215_PK A, BDG, D, G, PW, SN 2251_V 2251_PK 1 16 (46.0) For hollow metal doors 15 16 (23.8) 225_V 225_PK 1 16 (46.0) For hollow metal doors 15 16 (23.8) 222_V 222_PK 2211_V 2211_PK Combination door shoe and kick plate with rain drip. 225_V For hollow metal doors with inverted bottom channel. 2170_V COLORS: D, W LENGTHS: 36", 48" All Vinyl Also available with unnotched insert: 2170_V36UN 2170_V48UN 2173_V A, BDG, D, G, PW Also available with unnotched insert: 2173_V36UN 2173_V48UN 1 1 16 (27.0) 1 3 4 (44.5) 15 16 (23.8) 11 16 (17.5) 2343_V Also available with unnotched insert: 2343_V36UN 2343_V48UN 1 3 16 (30.2) 11 16 (17.5) 21_V 22_PK773 1 3 4 (44.5) 234_V 234_PK 3692_PK773 A LENGTHS: 36", 48" 1 8 (3.2) 17 16 (36.5) 9 16 (14.3) 9 16 (14.3) 16 FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum) BDG (Bright Dip Gold Anodized) D (Dark Bronze Anodized) G (Gold Anodized) PW (Painted White) SN (Satin Nickel Anodized)

Door Bottoms (Cont.) Door Bottom Sweeps 315_N B, BGD,, PW, SN 321_N 3151_N FINISH: 1 (31.8) Pemko Condensed Catalog 1 (25.4) 3452_NB BDG,, PW, SN 345_NB A, BDG, D, G, PW 345_V 345_PK A, BDG, D, G, PW Eco-V Astragals and Meeting Stiles Split Astragals and Meeting Stile Gasketing Astragals and meeting stiles may be mounted on pairs of doors wherein the gap meets the requirements of NFPA 80, The clearance between the meeting edges of doors swinging in pairs on the pull side shall be 1 8" ± 1 /16" (3.18mm ± 1.59mm) for steel doors and shall not exceed 1 8" (3.18mm) for wood doors. When used as split astragals on double doors, two lengths must be ordered: one for each door Punched with slotted holes for adjustment 297_S A, BDG, D, G, PW, SN 303_S A, BDG, C, D, G, PW, SN ALTERNATE INSERTS ALTERNATE INSERTS 297_PK 297_V 303_PK 303_V Eco-V Eco-V 29310_S ALTERNATE INSERTS 29310_PK 29310_P 29310_V Eco-V A (Mill Finish Aluminum) B (Architectural Bronze [Brass]) BDG (Bright Dip Gold Anodized) C (Clear Anodized) D (Dark Bronze Anodized) G (Gold Anodized) PW (Painted White) SN (Satin Nickel Anodized) 17

Pemko Condensed Catalog Astragals and Meeting Stiles (Cont.) 305_N B, EPDM 18041_NB, SN Pemko offers a broad line of nylon brush weatherstripping including the 18062_NB and 18100_NB, which are suitable for split astragal applications. 3_N 369_P 369_PK EPDM 369_S 369_PK773 32 (10.3) 32 (10.3) 5 32 (4.0) 369_P kerfed into meeting stile application PemkoPrene (PK) Adjustable Astragals When used as split astragals on double doors, two lengths must be ordered: one for each door Available in 84", 96" and 120" lengths 351 is surface applied, a full mortise option is also available NOTE: If you require split astragals in a metal-to-gasket configuration, you must order each leaf separately with your choice of insert. 351_/351_S ALTERNATE INSERTS B, 351_P 351_V 351_PK Eco-V Overlapping and T Astragals ALTERNATE 355_S INSERTS 356_V 355_V Eco-V B, BDG, C, D, A, BDG, D, G, PW, SN PW, SN Eco-V 355_P 357_ with S88_ SP, SS 355_PK PemkoPrene (PK) 18 FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum) B (Mill Finish Extruded Bronze [Brass]) BDG (Bright Dip Gold Anodized) C (Clear Anodized) D (Dark Bronze Anodized) G (Gold Anodized) PW (Painted White) SN (Satin Nickel Anodized) SP (Galvannealed Steel) SS (Stainless Steel)

Brush Gasketing All brush seals consist of densely compressed nylon filaments encased in high quality aluminum retainers. These products are ideally suited for hollow metal and wood door (in-door sweep, jamb/header gasketing, and split astragal) applications. Also use Pemko s brush weatherstripping products on overhead doors, sectional doors, sliding doors, and automatic doors All brush seals greatly reduce the infiltration of light, air, wind, rain, and snow; prevent heat loss; control the penetration of smoke and fumes Brush remains flexible down to -40 F and has a melting point above 400 F UV stabilized, dependable, long-lasting, cost-effective Punched with slotted holes for adjustment (except 35 angle types which are drilled with 1 8" hole) Pemko Condensed Catalog 45 Aluminum Retainers 45041_NB, PW 45061_NB, PW 45062_NB, PW 45100_NB, PW 45175_NB 45250_NB 35 Aluminum Retainers 35041_NB C, D 35061_NB C, D FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) C (Clear Anodized) D (Dark Bronze Anodized) G (Gold Anodized) PW (Painted White) 19

Pemko Condensed Catalog Brush Gasketing (Cont.) 180 Aluminum Retainers 18400_NB 18250_NB 18175_NB 18100_NB, PW 18062_NB, PW 18061_NB, SN 18041_NB, SN Mortise Retainers 5061_NB A 5025_SB A 180 Concealed Fastener Retainers 293100_NB C, D 29324_NB FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum) C (Clear Anodized) D (Dark Bronze Anodized) G (Gold Anodized) PW (Painted White) SN (Satin Nickel Anodized) 20

Perimeter Gasketing Adjustable Jamb Weatherstrip 379_S ADDITIONAL INSERTS: PK, R 322_SPK Pemko Condensed Catalog PemkoPrene (PK) 16 (20.6) 1 5 16 (33.3) 350_SR 350_SPK sponge EPDM (R) 16 (20.6) PemkoPrene (PK) 16 (20.6) 1 5 16 (33.3) 1 5 16 (33.3) Standard Perimeter Gasketing 303_S A, BDG, C, D, G, PW, SN 303_PK ALTERNATE INSERTS 303_V Eco-V Note: Alternate Inserts May Carry Different Ratings. See Full Line Catalog Or Website For More Information. 29310_S ADDITIONAL INSERTS: V, P, PK 297_S A, BDG, D, G, PW, SN 312_R 1 4 (6.4) 306_V A, BDG, D, G, PW, SN Eco-V 1 4 (6.4) 3 4 (19.1) FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum) BDG (Bright Dip Gold Anodized) C (Clear Anodized) D (Dark Bronze Anodized) G (Gold Anodized) PW (Painted White) SN (Satin Nickel Anodized) 21

Pemko Condensed Catalog Perimeter Gasketing (Cont.) Heavy Duty -Standard Jamb All gasketing shown below is sold individually 290_PK 29045_NB 2902_V 2903_V Eco-V Eco-V Solid Sections for Hardware Mounting -Head Section All gasketing shown below is sold individually 2891_S ADDITIONAL INSERTS: V, PK 2893_V A, D Eco-V 2892_V A, D 28945_NB Eco-V 1 4 (6.4) 1 1 2 (38.1) Acoustic Corner Pad ACP112_ COLORS: BL, W Note: Alternate Inserts May Carry Different Ratings. See Full Line Catalog Or Website For More Information. 22 FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum) D (Dark Bronze Anodized) G (Gold Anodized) Corner Pads: BL (Black) W (White)

Adhesive Gasketing MicroShield Antimicrobial Gasketing Extruded from high-temperature silicone with MicroShield, a silver-based antimicrobial additive Effective between -58ºF and 450ºF Adhesive Backed Self-extinguishing and non-toxic Unaffected by sunlight, ozone and ultraviolet rays Exceeds the requirements for Antimicrobial Test JIS-Z-2801 Pemko Condensed Catalog AM44_ BL, C, D, W LENGTHS: 17', 18', 20', 21', 25', 30', 250', 510' AM88_ BL, C, D, W LENGTHS: 17', 18', 20', 21', 25', 30', 250', 510' SiliconSeal - Adhesive Backed Fire/Smoke Gasketing S44 is designed for tighter frames and demonstrates extremely low closing force S44 and S88 are available with perforations along length for behavioral health applications S44_ BL, R, W LENGTHS: 17', 18', 20', 21', 25', 30', 204', 510' MicroShield As part of their promise to provide innovative solutions to their customers, certain ASSA ABLOY Group brands offer the MicroShield technology, a silver-based antimicrobial additive designed to inhibit the growth of bacteria. MicroShield is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. S77_ BL, C, D, W LENGTHS: 17', 18', 20', 21', 25', 30', 204', 510' S88_ BL, R, TAN, W LENGTHS: 17', 18', 20', 21', 25', 30', 204', 510' S773_ BL, D, GR, W LENGTHS: 17', 18', 20', 21', 25', 30', 250', 500' S776_ BL LENGTHS: 17', 18', 20', 21' Designed for hollow metal and wood meeting stile applications Seal begins compressing at 3 /8"; compresses to seal up to a 1 /16" gap 1 4 (6.4) 1 (25.4) 3 8 (9.5) Notes For All Adhesive Gasketing: Storage and shelf life: All adhesive gaskets have a limited shelf life. This product must be installed within 6 months of purchase and must be stored between 50ºF and 100ºF. Before installing: Thoroughly clean the frame to remove grease, dust or cleanser build-up (cleansing towelettes are included with product). Painted frame surface must be completely dry. Some hospital environments have wax or anti-bacterial cleanser build-up. As an alternative or substitute cleanser, use isopropyl (rubbing) alcohol. Note: Mineral spirits or other petroleum based cleaning products should NOT be used. FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) BL (Black) C (Clear) D (Dark) GR (Gray) TAN (Tan) W (White) 23

Pemko Condensed Catalog Adhesive Gasketing (Cont.) PemkoPrene - Adhesive Backed Fire/Smoke Gasketing PK33_ BL, D, W LENGTHS: 17', 18', 20', 21', 25', 30', 510' PK55_ BL, D, W LENGTHS: 17', 18', 20', 21', 25', 30', 510' Hot Smoke Seal Edge Sealing for Category B Doors HSS1000_ is a non-adhesive backed (mortise applied) intumescent HSS1000_ Graphite (no code), W LENGTHS: 7', 8', 10', 18', 21', 24' HSS2000_ Graphite (no code), W LENGTHS: 7', 8', 10', 18', 21', 24' Hot Smoke Seal/SiliconSeal Combination Fire/Smoke Gasketing Material is supplied in three lengths: one for each jamb and one for the header. When ordering, order by door size (i.e. 3684 or 3/0x7/0) as some lengths can be supplied in more than one opening size combination. HSS2000xS44 BL, R, W LENGTHS: 18, 20, 21, 24 HSS2000xS88_ BL, R, TAN, W LENGTHS: 18, 20, 21, 24 Adhesive Astragal/Meeting Stile Seals S771_ BL, R, W LENGTHS: 7', 8', 9', 10' S772_ BL, R, W LENGTHS: 7', 8', 9', 10' S771x6_ BL, C LENGTHS: 7', 8', 9', 10' Seal begins compressing at 5 /16"; compresses to seal up to a 1 /16" gap Hospitality Products Privacy Door Latch Bracket For use on Dunbartan, Reddiframe, and Timely Frames Available in a paint-grade galvanized steel or a US10B finish PDLBRKT_ COLORS: Blank (Galvanized Steel), 10B (Dark Brown) Privacy Door Latch Easy to install, simple to operate ADA compliant Enhanced room privacy UL classified as a fire door accessory PDL_ 3 (Polished Brass) 4 (Satin Brass) 10B (Dark Bronze) 26 (Polished Chrome) 26D/15 (Dull Chrome/Satin Nickel) 3 2 16 (55.6) 1 1 2 (38.1) 5 1 8 (41.3) 87 24 FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) Gasketing: BL (Black) C (Clear) D (Dark Brown) GR (Gray) TAN (Tan) W (White)

Acoustic Seal Sets PEMKO supplies the appropriate acoustic components in sets. These product combinations are lab tested and have known decibel drops when used with sound-rated doors. Each kit includes gasketing, a door bottom or threshold, and a complete set of installation InstructIons. Installation instructions show the proper installation location for each component for optimal performance. Item Number Gasketing Door Bottom Threshold Corner Pad PEMKOSTCSET-1A S773BL (Single Row) and S44BL (Single Row) PDB411AE ACP112BL PEMKOSTCSET-1B S44BL (Two Rows) PDB411AE ACP112BL PEMKOSTCSET-1C S442BL (Single Row) and S44BL (Single Row) PDB411AE ACP112BL PEMKOSTCSET-1D 303AS and S44BL (Single Row) PDB411AE ACP112BL PEMKOSTCSET-1E 312CR and S44BL (Single Row) PDB411AE ACP112BL PEMKOSTCSET-2A S773BL (Single Row) and S44BL (Single Row) 2008APK PEMKOSTCSET-2B S44BL (Two Rows) 2008APK PEMKOSTCSET-2C S442BL (Single Row) and S44BL (Single Row) 2008APK PEMKOSTCSET-2D 303AS and S44BL (Single Row) 2008APK PEMKOSTCSET-2E 312CR and S44BL (Single Row) 2008APK PEMKOSTCSET-3A S773BL (Single Row) and S44BL (Single Row) 3692APK773BL PEMKOSTCSET-3B S44BL (Two Rows) 3692APK773BL PEMKOSTCSET-3D 303AS and S44BL (Single Row) 3692APK773BL PEMKOSTCSET-3E 312CR and S44BL (Single Row) 3692APK773BL PEMKOSTCSET-4A S773BL (SingleRow) and S44BL (Single Row) 2009APK PEMKOSTCSET-4B S44BL (Two Rows) 2009APK PEM KOSTCSET-4D 303AS and S44BL (Single Row) 2009APK PEMKOSTCSET-4E 312CR and S44BL (Single Row) 2009APK Pemko Condensed Catalog How To: 1. Locate the Sealed-in-Place (inoperable) rating for your door. 2. Determine the maximum allowable drop for your opening (i.e. -1 db). Note: the numbers are represented as negative numbers as they will decrease your inoperable rating by the number shown (i.e. 45 using a -1 kit will decrease the inoperable rating from 45 to an operable of 44) 3. Find a number in the column below your door's inoperable rating that will keep your opening in the allowable range. 4. Select a kit (or one of the kits given if Alternate Kits are shown), place it on your Purchase Order and add your opening size in inches (i.e. a 3/0 x 7/0 opening will be ordered as a 3684). Item Number PEMKOSTCSET-1A Alternate Kits: 1B, 1C, 1D, 1E Sealed-in-Place Door STC Rataing 58 to 54 53 to 49 48 to 46 45 to 43 <42-2 -2-1 0 PEMKOSTCSET-2C -3-2 -2-1 0 PEMKOSTCSET-2D -3-2 -1-1 0 Alternate Kits: 2A, 2B PEMKOSTCSET-2E -2-2 -1-1 0 PEMKOSTCSET-3A -2-1 0 0 PEMKOSTCSET-3D -2-1 0 0 PEMKOSTCSET-3E -2-2 -1 0 0 PEMKOSTCSET-4A 0 0 PEMKOSTCSET-4B 0 0 PEMKOSTCSET-4D 0 0 PEMKOSTCSET-4E 0 0 NOTE: A seal set cannot increase the sealed-in-place rating; a zero drop is the best performance any seal set can provide. FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum) C (Clear Anodized) D (Dark Bronze Anodized) 25

Pemko Condensed Catalog Sliding and Folding Hardware Sliding 200 Series Features: Needle bearing hangers for smooth operation 200 lb. panel capacity Galvanized steel track 280 Aluminum track 280C H200A Kits Include: 1 ea 280C Track 2 ea H222R1 Hangers 1 ea 102N Nylon Guide 2 ea TELS-14KIT Stops 1 ea Adjusting Wrench and Mounting Hardware Standard Kit Sizes Part Number Material Track Length Door Width H200A/4 Aluminum 48" 24" H200A /5-4 Aluminum 64" 32" H200A/6 Aluminum 72" 36" H200A/7 Aluminum 84" 42" H200A/8 Aluminum 96" 48" H200A/10 Aluminum 120" 60" H200A/12 Aluminum 144" 72" H200/6 Steel 72" 36" H200/8 Steel 96" 48" Folding 100 Series FOR FOLDING DOORS AND ROOM DIVIDERS TO 100 LBS. High quality hardware makes medium weight folding doors efficient and easy-touse. Two and four leaf kits are available FOUR PANEL: HF4/100A Kits Include: 1 ea 280C Track 2 ea 283 Hangers 2 ea 289T Top Pivots 2 ea 289B Bottom Pivots 6 ea 282HD Hinges 2 ea 106HF/94 Guide 1 ea 94A Guide Channel 1 ea Adjusting Wrench and Mounting Hardware OPTIONS: Mounting Bracket 281 available as 5 pack only, 2815 Bottom Channel 94A Threshold 971A Finish: 280A Track available in Clear Anodized (C) Standard Kit Sizes Part Number Material # of Panels Track Length HF2/100A/2 Aluminum 2 24" HF2/100A/2'6 Aluminum 2 30" HF2/100A/3 Aluminum 2 36" HF2/100A/4 Aluminum 2 48" HF4/100A/4 Aluminum 4 48" HF4/100A/5 Aluminum 4 60" HF4/100A/6 Aluminum 4 72" HF4/100A/8 Aluminum 4 96" HF2/100/4* Steel 2 48" HF4/100/8* Steel 4 96" Bypass Track Series For Bypassing Panels to 200 lbs. Fits 1 3 /8" and 1 3 /4" doors Needle-bearing wheels for ultra smooth performance Load capacity 200 lbs. (2 hangers) Extruded aluminum track HBP200A Kits Include: 1 ea 2802C Track 4 ea H222R1 Hangers 2 ea 102N Nylon Guide 4 ea TELS-14KIT Stops 1 ea Adjusting Wrench and Mounting Hardware OPTIONS: Hardware Kit H200 PACK Mounting Bracket 2812 Track 280D Track Stop (bumper) 287HD Bottom Channel 94A Fascia, Snap-On F4C F4D Roller Guide 106R/94 Dual Guide Channel Polypropylene Guide Rail 2802BT EPD3BL for use with 102N 280C Track available in Clear Anodized (C) F4C Fascia in Clear Anodized (C) 1 3 /8" Thick Doors Side Wall Mount NOTE: Route door 9 16" deep by 1 /4" wide to receive 102N Guide. 1 3 /4" Thick Doors Overhead Mount 26

Sliding and Folding Hardware (Cont.) W60 Series for Wood Doors Configurations: Installations: Single Side Wall Mount (only) Bi-parting Features: Made of 304 stainless steel 2 2 1 " [63 mm] Nylon coated stainless steel wheel for smooth operation 176 lb. panel capacity 5 year warranty Finishes: Brushed Stainless Steel (W60) Dark Bronze Stainless Steel (W60D) Polished Stainless Steel (W60P) W60 Kits Include: 1 ea BAR/_ Stainless Steel Track BRACKET2 Stainless Steel Wall Brackets 2 ea 62 Stainless Steel Hangers 1 ea WOODGUIDE Stainless Steel Guide 2 ea STOP2 Stainless Steel Stops Mounting Hardware 1 16 1 " [26 mm] 11 16 " [17 mm] NOTE: If ordering individual parts in the optional Dark Bronze or Polished finishes, be sure to include a suffix "D" for Dark Bronze or "P" for Polished Stainless Options: See page 39 Bottom Channel 94A Roller Guide 106R/94 Mortise Guides 102N Polypropylene Guide Rail EPD3BL For Use With WOODGUIDE 1 9 16 " [39 mm] 1 4 " [6 mm] 2 2 1 " [63mm] 1 3 4 " [44 mm] 1 16 1 " [27 mm] 4 3 8 " [111 mm] 1 16 1 " [26mm] 11 16 " [17mm] 1 3 4 9 " [44mm] 16 " [14 mm] 1 4 " [6mm] 3 8 " [10 mm] 1 16 9 " [39 mm] 3 8 " [10mm] 1 16 1 " [27mm] 4 3 8 " [111mm] 9 16 " [14mm] Part Number 3 15 16 " [100 mm] NOTE: Alternate route dimension when using optional EPD3BL 3 16 15 " [100mm] Material 2 8 3 " [60mm] 2 3 8 " [60 mm] Standard Kit Sizes Track Length Door Width W60/6 304 Stainless Steel 78 3 / 4" 36" W60/8 304 Stainless Steel 98 7 / 16" 48" W60D/6 304 Dark Bronze Stainless Steel 78 3 / 4" 36" W60D/8 304 Dark Bronze Stainless Steel 98 7 / 16" 48" W60P/6 304 Polished Stainless Steel 78 3 / 4" 36" W60P/8 304 Polished Stainless Steel 98 7 / 16" 48" Pemko Condensed Catalog Lites & Louvers Low Profile - Beveled Lite Kit The LT-B1 Lite Kit provides a wide viewing angle. For use with glazing material requiring a 3 /8" pocket in 1 3 /4" wood or metal doors. The LT-B1 installs without drilling holes through the door for quick installation. The hemless design is a flush mounted assembly and is ideal for clean environments 22 gauge galvannealed steel blank side and 20 gauge galvannealed steel inner frame LT-B1_ B, D, G 9 / 16" 1 7 / 16" 1 3 / 4" Door Door 1 / 16" 1 / 8" Inverted Y Louver The LV-IY Louver for 1 3 /4" wood or metal doors provides 50% free air flow. The 20 gauge inverted Y blades add stiffness and a burr-free exposed edge. The 18 gauge galvanneal mitered frame secures the grill assembly in place giving it a clean appearance 18 gauge galvannealed frame 20 gauge galvannealed inverted Y blades LV-IY_ B, D, G Order Size & Door Cutout 5 16 (7.9) 3 / 8" Glazing Pocket FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) B (Beige Powder Coat) D (Dark Bronze Duranodic Powder Coat) G (Gray Primer Powder Coat) 27

ASSA ABLOY 5535 Distribution Drive Memphis, TN 38141 websales@pemko.com www.pemko.com MEMPHIS, TN USA P: 800 824-3018 F: 800 243-3656 VENTURA, CA USA P: 800 283-9988 F: 800 283-4050 VANCOUVER, BC CA P: 877 535-7888 F: 877 535-7444 TORONTO, ON CA P: 877 535-7888 F: 877 535-7444 Copyright 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited. 80008 3/17