ONRETE AEORIE oils ifting ystem IFTING YTEM 33
IFTING YTEM OI TRAIGHT OI OOP oil is welded to a single wire closed loop. THREA () () OY () IA. () W 160540 1/2" coil 4" 1-3/16" 0.306" 2250 5" 160560 1/2" coil 6" 1-3/16" 0.306" 3000 7" 160524 1/2" coil 24" 1-3/16" 0.306" 3000 7" 1607540 3/4" coil 4" 1-5/8" 0.375" 2250 5" EGE IT. 1607560 3/4" coil 6" 1-5/8" 0.375" 3750 7" 161040 1" coil 4" 2-1/16" 0.375" 3750 5" 161050 1" coil 5" 2-1/16" 0.375" 3750 6" 161060 1" coil 6" 2-1/16" 0.375" 3750 7" 161080 1" coil 8" 2-1/16" 0.375" 3750 9" Note: W provides a factor of safety of approximately 4:1 in 3,000 psi normal ONA does not recommend using 1/2" inserts for lifting. OUE FARE OI OOP econd coil loop adds significant capacity in both shear and tension. THREA () () OY () IA. () W 171012 H 1" 12" 2-1/16" 0.440" 13500 5-3/4" 17-1-1/4" X 12 H 1-1/4" 12" 2-3/8" 0.440" 13500 5-3/4" 17 1-1/2" x 12 H 1-1/2" 12" 2-9/16" 0.440" 13500 5-3/4" Note: W provides a factor of safety of approximately 4:1 in 3,000 psi normal weight concrete INGE FARE OI OOP oil is welded to a singled flared wire loop strut. THREA () () OY () IA. () OOP PREA () W 180540 1/2" 4" 1-3/16" 0.306" 3-1/8" 3000 6" 180512 1/2" 12" 1-3/16" 0.306" 3-1/8" 3000 20" 1807540 3/4" 4" 1-5/8" 0.306" 3-1/2" 3000 6" 1807560 3/4" 6" 1-5/8" 0.375" 3-1/2" 4750 9" 180759 H 3/4" 9" 1-5/8" 0.440" 5-5/8" 8000 15" 1807512H 3/4" 12" 1-5/8" 0.440" 5-5/8" 8000 20" 18109 H 1" 9" 2-1/16" 0.440" 5-5/8" 8000 15" 181012H 1" 12" 2-1/16" 0.440" 5-3/4" 8000 20" UGGETE EGE ITANE Note: W provides a factor of safety of approximately 4:1 in 3,000 psi normal ONA does not recommend using 1/2" inserts for lifting. 34 1-800-336-2598
OI OUE FARE RI-RO OI OOP econd coil loop adds significant capacity in both shear and tension. THREA () () OY () IA. () OOP PREA () W 33 10x12-1/2" 1" 12-1/2" 2-1/16" 0.375" 5-9/16" 9500 33 10 x 12-1/2" H 1" 12-1/2" 2-1/6" 0.440" 5-3/4" 13500 IFTING YTEM Note: W provides a factor of safety of approximately 4:1 in 3,000 psi normal THIN A 4 EG OI Very versatile insert intended for use for lifting and handling thin slab concrete. The coil is welded to four " shaped legs. THREA () () OY () IA. () PREA () W 530753 3/4" 3" 1-5/8" 0.306" 7-1/16" 2000 4 5307540 3/4" 4" 1-5/8" 0.306" 7-1/16" 2000 4 TRUT 530755 3/4" 5" 1-5/8" 0.375" 7-1/16" 2500 4 531035 1" 3-1/2" 2-1/16" 0.375" 9-3/8" 3000 4 531040 1" 4" 2-1/16" 0.375" 9-3/8" 3000 4 531055 1" 5-1/2" 2-1/16" 0.375" 9-3/8" 3000 4 5310612 W/6 1" 6-1/2" 2-1/16" 0.375" 9-3/8" 3000 6 531240 1-1/4" 4" 2-1/16" 0.375" 9-3/4" 3000 4 Note: W provides a factor of safety of approximately 4:1 in 3,000 psi normal EXPANE OI W/2 OR 4 TRUT oil is welded to dual flared wire loop struts. Intended for use for heavy anchorage conditions. Inserts located at the end of either two or four wire connecting struts. TRUT THREA () () OY () IA. () OVERA WITH (G) W 56-3/4 2 3/4" 4-1/2" 1-5/8" 0.440" 2-1/8" 4250 56-1 2 1" 5-1/2" 2-1/16" 0.440" 2-3/8" 6250 58-1-1/4 4 1-1/4" 7-1/2" 2-3/8" 0.440" 3" 12000 60-1-1/2 6 1-1/2" 9-1/2" 2-9/16" 0.440" 3" 16250 Note: W provides a factor of safety of approximately 4:1 in 3,000 psi normal G 35
IFTING YTEM OI FARE THIN A OI - WING NUT TYE oil is welded to two " profile closed loop wire struts. Intended for handling thin slab concrete sections. THREA () () OY () IA. () PREA () W 6305175 1/2" 1-3/4" 1-3/16" 0.223" 4-1/2" 950 4" 630752516 3/4" 2-5/16" 1-5/8" 0.375" 4-7/8" 2000 5" 63075312 3/4" 3-1/2" 1-5/8" 0.375" 4-7/8" 3400 10" 6307540 3/4" 4" 1-5/8" 0.375" 4-7/8" 3400 10" 63102516 1" 2-5/16" 2-1/16" 0.375" 5-1/4" 2000 5" 631030 1" 3" 2-1/16" 0.375" 5-1/4" 2980 8" 6310350 1" 3-1/2" 2-1/16" 0.375" 5-1/4" 3400 10" 631040 1" 4" 2-1/16" 0.375" 5-1/4" 3400 10" 6310412 1" 4-1/2" 2-1/16" 0.375" 4-1/4" 4750 10" UGGETE EGE ITANE Note: W provides a factor of safety of approximately 4:1 in 3,000 psi normal ONA does not recommend using 1/2" inserts for lifting. INGE PIK UP OI Used for face lifting of flat wall panels. THREA () () W 1T10550 1" 5-1/2" 3750 1T10650 1" 6-1/2" 5000 1T10750 1" 7-1/2" 6480 1T10950 1" 9-1/2" 8100 Note: W provides a factor of safety of approximately 4:1 in 3,000 psi normal eformed Wire 36 1-800-336-2598
OI OI TIE Very versatile insert intended for use for lifting. The coil is welded to two or four strut also available with hear ar. Intended as a strong and versatile form tie insert. G G IFTING YTEM TRAIGHT RI-RO OI Ideal for edge lifing applications due to high strength provided by the 4 struts design. TRUT THREA () () OY () IAMETER () OVERA WITH (G) W T2-3/4X5 2 3/4" 5" 1-5/8" 0.375" 1-5/8" 4250 T2-3/4X6 2 3/4" 6" 1-5/8" 0.375" 1-5/8" 4500 T2-3/4X8 2 3/4" 8" 1-5/8" 0.375" 1-5/8" 6000 T2-3/4X21 2 3/4" 21" 1-5/8" 0.375" 1-5/8" 6000 T2-1X6 2 1" 6" 2-1/16" 0.440" 2-3/8" 6000 T2-1-1/4X8 2 1-1/4" 8" 2-1/16" 0.440" 2-1/2" 7500 T4-3/4X6 4 3/4" 6" 1-5/8" 0.440" 1-3/4" 6000 T4-1X6 4 1" 6" 2-1/16" 0.440" 2-3/8" 6000 T4-1X8 4 1" 8" 2-1/16" 0.440" 2-3/8" 9000 T4-1X12 4 1" 12" 2-1/16" 0.440" 2-3/8" 9000 T4-1X15 4 1" 15" 2-1/16" 0.440" 2-3/8" 9000 T4-1-1/4"X8 4 1-1/4" 8" 2-3/8" 0.440" 2-1/2" 9000 T4-1-1/4"X12 4 1-1/4" 12" 2-3/8" 0.440" 2-1/2" 13500 T4-1-1/4"X18 4 1-1/4" 18" 2-3/8" 0.440" 2-1/2" 13500 T4-1X12 4 1" 12" 2-1/16" 0.440" 2-3/4" 9000 T4-1X15 4 1" 15" 2-1/16" 0.440" 2-3/4" 9000 T4-1X18 4 1" 18" 2-1/16" 0.440" 2-3/4" 9000 T6-1-1/4X10 6 1-1/4" 10" 2-3/8" 0.440" 2-3/4" 12000 Note: W provides a factor of safety of approximately 4:1 in 3,000 psi normal THREA () () IA. () OY () W F 3/4X9 3/4" 9" 0.375" 1-5/8" 3,700 F1X12H 1" 12" 0.440" 2-1/16" 6,500 F1-1/4X12H 1-1/4" 12" 0.440" 2-3/8" 7,500 Note: W provides a factor of safety of approximately 4:1 in 3,000 psi normal 37
IFTING YTEM OI OI NUT F T THREA () THIK. (T) ARO FAT (F) N05 1/2" 1/2" 3/4" 1800 N075 3/4 3/4" 1-1/8" 3600 N10 1" 1" 1-1/2" 7200 TENION TRENGTH tandard finish plain (self color) OI OT T F THREA () () HEA THIK. (T) ARO FAT (F) TENIE TRENGTH 0515 1/2" 1-1/2" 3/8" 3/4" 2700 0520 1/2" 2" 3/8" 3/4" 2700 0525 1/2" 2-1/2" 3/8" 3/4" 2700 0530 1/2" 3" 3/8" 3/4" 2700 0540 1/2" 4" 3/8" 3/4" 2700 0550 1/2" 5" 3/8" 3/4" 2700 0560 1/2" 6" 3/8" 3/4" 2700 07520 3/4" 2" 1/2" 1-1/8" 3600 AUTION: oil bolts should always be long enough to penetrate at least 1" beyond the coil insert threads. 07525 3/4" 2-1/2" 1/2" 1-1/8" 3600 07530 3/4" 3" 1/2" 1-1/8" 3600 07540 3/4" 4" 1/2" 1-1/8" 3600 07550 3/4" 5" 1/2" 1-1/8" 3600 1040 1" 4" 11-16" 1-1/2" 7200 tandard finish plain (self color) OI RO IZE (X) TENIE W HEAR W R 1/2 X 6 1/2" X 6 3600 2400 AUTION: o not cut with torch. All ONA coil rods are made from high tensile steel. R 3/4 X 6 3/4" X 6 7200 4800 R 1 X 6 1" X 6 15000 10000 R 1-1/4" X 6 1-1/4" X 6 22400 15000 R 1-1/2" x 6 1-1/2" X 6 27000 18000 tandard finish plain (self color) PATI OI PROTETOR ooks like coil bolt. Use for keeping the coil clean during casting. an be nailed to wood forms. THREA IZE T OOR PP-05 1/2" OI 1/2" 2-1/4" white 200 PP-075 3/4" OI 3/4" 3" white 200 PP-01 1" OI 3/4" 4-1/2" white 200 QUANTITY PER OX T OI THREAE PATI PUG an be nailed to wood forms THREA IZE OOR TP4016 1/2" OI lt. blue 100 QUANTITY PER OX TP4018 3/4" OI dk. green 100 38 1-800-336-2598
OI WIVE IFTING PATE For safe lifting, ifting Plates must have full bearing and be tightened securely. 5:1 safety factor. IFTING YTEM 1-1/2" 2-3/4" 2-3/4" 5" 2-5/8" 5-1/8" 7-1/16" IZE MIN. OT APA. WP75 3/4" 4" 9,000 WP10 1" 5" 9,000 IZE MIN. OT APA. WP10-1" 5" 9,000 IZE MIN. OT APA. WP125-1-1/4" 6" 13,500 WP150-1-1/2" 6" 13,500 OI IFTING OOP Most economical lifting units for this system. Manufactured from flexible wire rope. For tension only - limited to 30 degrees from vertical. Galvanized cable loop with mill finished threaded stud. IAMETER () APAITY OA A 50 1/2" 2,000 5-1/2" 2-1/4" 75 3/4" 5,000 8-1/2" 2-3/4" 100 1" 8,000 10-3/4" 2-3/4" A Note: W provides a factor of safety of approximately 5:1 in 3,000 psi normal EYE OT Forged steel: one piece coil threaded eye bolt for tension lifting only. A THREA () THREA () OUTIE IA. (A) INIE IA. () W EYE OT 3/4X2 EYE OT 3/4" 2" 2-7/8" 1-1/2" 3,600 EYE OT 1X2-1/2 EYE OT 1" 2-1/2" 3-1/2" 1-3/4" 6,400 Note: W provides a factor of safety of approximately 5:1 in 3,000 psi normal 39