L634 [56.49] X UNICLASS L75627 ambiente more than underfloor UNDERFLOOR HEATING TRADE PRICELIST 2016-17
003 KITCHEN / DINING 20 C 2463 W 001 LOUNGE 20 C 1381 W 006 UTILITY 18 C 611 W 005 HALL / CLOAK ROOM 18 C 1380 W GROUND FLOOR 002 FAMILY ROOM 20 C 878 W 004 STUDY 20 C 629 W Distributor 1 UFH DESIGN SERVICE ambiente SUSTAINABILITY Ambiente offers a professional UFH CAD design service as well as heat output figures and optional heat loss calculations. Having our own design team means that we can be much more flexible during the design stage and can quickly accommodate any alterations to the layout and other requirements as they are specified by the architect, builder or client. We can prioritise these changes in our system and minimise any delays. These drawings are also supplied to our clients for their own records. We also keep all our drawings in our electronic database for future reference and if clients require this information we can readily supply it. We also supply comprehensive wiring diagrams showing how the system should be wired, by your on-site electrician. AT AMBIENTE WE EMPLOY A TEAM OF HIGHLY TRAINED UNDERFLOOR HEATING TECHNICIANS TO ANSWER ANY QUERIES YOU MAY HAVE PRIOR TO AND DURING INSTALLATION. This same skilled team will also provide you with excellent after-sales support, giving you complete peace of mind for the future of your system. Ambiente is committed to providing sustainable solutions and protecting the environment. We only source our products from sustainable sources and we make sure that not only are our systems efficient in their operation, but also that they can be coupled with renewable heat sources such as solar thermal systems. As a company we are employing more and more efficient practices such as the use of up to date machinery and enviro-friendly vehicles. OUR GUARANTEE We put so much into the design and manufacture of our products and can confidently say that our industry-leading guarantees will give you complete peace of mind. LIFETIME PIPEWORK WARRANTY SCREEDED FLOOR SYSTEMS Screeded systems are the most popular and effective type of underfloor heating. Pipes are clipped or stapled onto an insulation layer then the screed is laid on top. The warm pipes effectively heat up the whole screed slab, giving even and consistent heat output. + Rapid Installation + Maximum output + Versatile pipe layout SUSPENDED FLOOR SYSTEMS Used for joisted or battened floors, we offer a range of plated solutions to suit each application. The aluminium plate either spans the joists or is fixed from underneath and supports the pipes as well as spreading heat for an even heat output. + For joisted/battened floors + No impact on floor build up + Maximum heat transfer FLOATING FLOOR SYSTEMS Floating floor systems consist of pipes laid into pre-grooved and foiled insulation boards which can be laid directly onto the floor surface below. + Can be used in existing floor constructions + Quick response time + Improves insulation value LOW PROFILE FLOOR SYSTEMS Low Profile systems are ever-increasing in popularity as more people see the benefits of underfloor heating and want to add it to their property. They can be laid directly onto any solid floor surface to provide an even heat output with minimal floor build-up. + Slim floor build up, minimum impact on floor build up + Suitable for refurbishment projects + Add UFH to existing property SPECIALIST SYSTEMS We have developed some specialist systems to cater for specific requirements such as structural floor areas, raised access floor systems and even a revolutionary wall heating solution. BESPOKE SYSTEMS Ambiente offers the unique service of manufacturing bespoke systems to cater for any unusual or demanding requirements. Our design team will be happy to assist you in your project and work with you to come up with the best system to meet your needs. Guide output : up to 100w/m 2 Guide output : up to 70w/m 2 Guide output : up to 80w/m 2 Guide output : up to 80w/m 2 2 Ambiente Systems UK 3
Image Image MANIFOLDS Manifolds Manifold Couplings Pre-assembled stainless steel distribution manifold with 3/4" Euro cone take-offs. (Includes fill/drain valves, pressure gauge and mounting brackets). 3/4" Coupling for 12 x 1.5mm PE-RT 42189 4.27 3/4" Coupling for 17 x 2mm PE-RT 42200 3.01 Manifold 1 port 42199 89.96 Manifold 2 port 41300 111.75 Manifold 3 port 41310 141.10 3/4" Coupling for 16 x 2mm PEX-AL-PEX 42250 3.29 Manifold 4 port 41320 170.44 3/4" Coupling for 16 x 2mm PE-RT 42199 3.22 3/4" Coupling for 15mm copper/plastic 42197 3.34 42105 5.15 41330 217.02 41340 229.12 Manifold 7 port 41350 258.47 Manifold 8 port 41360 287.81 Straight connector 3/4" (pipe repair for use with relevant pipe couplings to join pipe) Manifold 9 port 41370 317.15 Manifold Accessories (supplied with manifold except where stated) Manifold 10 port 41380 346.49 Manifold 11 port 41390 375.83 Manifold 12 port 41395 405.18 Manifold 13 port 41396 456.80 Manifold 14 port 41397 487.22 42180 42410 Manifold bypass (not supplied with manifold) 41400 133.98 1" pair of ball valves (not supplied with manifold) 42050 26.74 1" pair of ball valves with temperature gauge (not supplied with manifold) 42060 61.12 1" M/F elbow 42125 11.35 Flow meter replacement 42180 18.40 Actuator replacement valve 42181 13.80 Manifold blanking cap (not supplied with manifold) 42183 1.99 Pressure gauge and adaptor 42184 11.75 Auto air vent (not supplied as standard) 42390 8.78 Fill/drain valve 42410 15.43 Manifold tag 46755 1.25 42184 42181 6 3 1 Manifold flow bar 10 9 2 Manifold return bar 1 5 Blending valve (25-60OC) 4 8 6 Flow meter Manifold cabinets in galvanised steel with enamelled white door 355mm 4 CircoMax circulating pump 200mm 3 Isolating ball valves Recessed cabinet (540 x 630 x 90mm - up to 4 port) 42755 137.28 Recessed cabinet (740 x 630 x 90mm - up to 8 port) 42756 171.72 Recessed cabinet (890 x 630 x 90mm - up to 10 port) 42757 194.92 Recessed cabinet (1040 x 630 x 90mm - up to 12 port) 41758 221.90 Surface mounted cabinet (560 x 650 x 130mm - up to 5 port) 42750 238.47 Surface mounted cabinet (760 x 650 x 130mm - up to 9 port) 42751 277.03 Surface mounted cabinet (910 x 650 x 130mm - up to 10 port) 42752 291.94 Surface mounted cabinet (1060 x 650 x 130mm - up to 12 port) 42753 315.39 MANIFOLD FITTINGS AND ACCESSORIES Manifold 5 port Manifold 6 port 7 7 Actuator head (shown with pre-install caps) 2 8 Pressure gauge 9 Temperature gauge 5 10 High temperature protection sensor (optional) 130mm 150mm 70mm See manifold table below Recommended minimum installation clearances: 200mm between the finished floor level (FFL) and bottom of the manifold, 100mm above the manifold, 50mm to either side of the manifold and allow an extra 100mm for the connection of the primary flow/return pipework. 4 Number of ports 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Manifold Length (mm) 150 192 242 292 342 392 442 492 542 592 642 692 750 805 Ambiente Systems UK 5
Image Image Pumps/Pump Assemblies (with blending valve) 12mm x 1.5mm PE-RT Pipe 12mm x 1.5mm PE-RT pipe 100 metre roll (5 layer) 39000 88.37 CircoMax manifold pumpset (Grundfos UPM3 pump) 41434 412.50 12mm x 1.5mm PE-RT pipe 200 metre roll (5 layer) 30020 176.75 12mm x 1.5mm PE-RT pipe 500 metre roll (5 layer) 30050 441.87 High temperature protection sensor available for CircoMax pumpset- enquire for details. 17mm x 2mm PE-RT Pipe 17mm x 2mm PE-RT pipe 120 metre roll (5 layer) 41000 161.49 PUMPS AND PUMP FITTINGS VALVES AND FITTINGS Single zone pump/blender unit (Grundfos UPS2 pump) (requires 2 no. 42121 adaptors) Grundfos UPS2 25-60 pump (supplied as replacement pump for 41444 only) Grundfos UPM3 pump (supplied as replacement pump for 41434 only) Pump fittings Straight M-M 1/2" - 3/4" (Sold in pairs for use with single zone pump 41445) 41444 522.00 41411 181.90 41432 216.00 42121 4.50 Pump gate valve 22mm 42081 14.06 Pump gate valve 28mm 42080 14.66 CircoMax Isolation Valves (Sold in pairs to isolate primary pipework before the pumpset) 42082 26.48 Straight connector 22mm x 3/4" BSP (male) 42085 7.18 Straight connector 28mm x 1" BSP (male) 42090 9.68 Zone valves and blending valves Blending valve 22mm (temperature range 35-65 O C) 43040 106.40 Blending valve 28mm (temperature range 35-60 O C) 43041 209.00 Motorised valve 22mm (230v) 43070 82.84 Return temperature limiter valve kit 44200 168.18 Actuator valves (for individual loop control) 2 wire actuator valve (230v), N/C, spring return (2m lead) 43016 18.00 17mm x 2mm PE-RT pipe 240 metre roll (5 layer) 41010 322.99 17mm x 2mm PE-RT pipe 700 metre roll (5 layer) 41020 942.08 16mm x 2mm PEX-AL-PEX Pipe 16mm x 2mm PEX-AL-PEX pipe 100 metre roll (MLCP) 40000 136.54 16mm x 2mm PEX-AL-PEX pipe 200 metre roll (MLCP) 40010 273.07 16mm x 2mm PEX-AL-PEX pipe 500 metre roll (MLCP) 40020 682.05 Split Flex Conduit (Used to protect pipework on expansion joints) Split flex conduit for 16/17mm pipe 50 metre roll 46800 60.71 Pipe Bends (For use below a manifold to take pipes neatly into the floor) 90 O (20mm) closed form - For 12mm pipe 41040 1.60 90 O (25mm) closed form - For 16/17mm pipe 41050 1.80 90 O (16-18mm) open form 41060 1.50 Fixings Tacker clips 40mm (300 pieces) - Use with 44000 tacker gun 41530 14.50 Tacker clips 60mm (300 pieces) - Use with 44001 tacker gun 41550 17.12 Cliprail clips 45mm (200 pieces) 41505 8.31 Cliprail length for 17mm pipe (1m) 41450 2.76 Nail-in pipe clips for 16/17mm pipe (100 pieces) 41500 13.71 Nail-in pipe clips for 12mm pipe (100 pieces) 41490 10.10 Clout nails 25mm (approximately 400 pieces) 41501 9.68 Zip ties 200mm (100 pieces) 46750 5.00 Diffuser plates 1000mm x 390mm double groove aluminium spreader plate 44520 8.64 1000mm x 200mm double groove aluminium spreader plate 44600 12.08 PIPE FIXINGS PLATES 2 wire actuator valve (24v), N/C, spring return (2m lead) 43021 18.00 Triple-groove and other bespoke plates available on request. 6 Ambiente Systems UK 7
Image Image Pre-grooved and foiled EPS Insulation (grooved for 17mm pipe at 200mm centres) Dial Thermostats AmbiFloat 10 EPS100 1.2 x 1.2m (with returns) 25mm 46000 32.45 Ambiente standard dial thermostat (230v) 43200 16.28 AmbiFloat 10 EPS100 1.2 x 1.2m (with returns) 50mm 46040 42.04 Tamper proof cover for standard dial thermostat 43201 8.32 AmbiFloat 20 EPS100 1.2 x 0.35m (with returns) 50mm (for use between 50mm joists at 400mm centres) 46044 15.48 Ambiente night set-back thermostat (230v) (includes temperature-limiting function) 43214 41.14 BOARD SYSTEMS AND ACCESSORIES Low profile systems (grooved for 12mm pipe at 150mm centres) AmbiLowboard pre-grooved and foiled EPS250 1.2 x 0.6m (with returns) 18mm AmbiScreedboard SX18 straight panel (pre-grooved cement board with lap joint 1200 x 600 x 18mm) AmbiScreedboard RX18 return panel (pre-grooved cement board with lap joint 1200 x 600 x 18mm) AmbiScreedboard joint adhesive (1ltr - allow one bottle per 25m2) 46060 17.15 46670 38.26 46672 45.40 46665 20.10 AmbiScreedboard screws (allow one box per 50m 2 ) 46667 11.30 AmbiPrime 77 (1L professional tiling primer) 47200 14.44 AmbiBond Adhesive SB200 (17kg - covers approx 15m 2 ) 47100 176.77 AmbiChipboard pre-grooved 22mm T+G structural chipboard 2.4m x 0.6m (with radius returns) 50m aluminium foil tape (for use with AmbiFloat/ AmbiLowboard products) 46685 61.70 92004 10.60 Programmable Digital Thermostats Ambiente PRT/E programmable thermostat (230v) (Can be used for both wet and electric UFH) 43500 74.88 Ambiente PRT/NE programmable thermostat (12v) 43510 78.84 Slimline-RF wireless programmable thermostat 43856 103.14 Touch programmable thermostat (230v) 43463 124.32 Touch-N programmable thermostat (12v) 43471 128.10 Ambiente central touchpad controller (12v) 43905 565.08 Neostat programmable thermostat 230v (Smartphone control option with this product) Neostat programmable thermostat 12v (Smartphone control option with this product) NeoAir wireless thermostat (Smartphone control options with this product) NeoAir Stand (An alternative to fixing your NeoAir stat to the wall) 42840 124.20 42842 124.20 42880 124.20 42890 18.74 THERMOSTATS AND TIMECLOCKS AmbiSolo self-adhesive panel 1.05 x 0.65m (covers 0.6m2) 46100 10.69 Castellated panels (for use with 16mm and 17mm pipe) Wifi Smart Stat (Integrated thermostat and programmer, linking directly to Wifi for smartphone control) Timeclocks/Programmers 42880 234.38 INSULATION Castellated panel plain 1.22m x 0.82m (overall height 20mm) 46320 12.20 Castellated panel with 10mm EPS100 backing 1.22m x 0.82m (overall height 30mm) Castellated panel with 30mm EPS100 backing 1.22m x 0.82m (overall height 50mm) Border edge insulation 46325 21.94 46330 27.46 Border edge insulation (150 x 8mm) 50m 41620 20.52 TM1, 1 channel timeclock (230v) 43540 80.50 TM4-TS, 4 channel touchscreen timeclock (230v) 43569 104.04 Internet control Neohub for use with Neostat for heating control via a smartphone 42870 233.96 Border edge insulation (150 x 8mm) 50m with skirt for flowing screed 41640 24.99 Programmable Digital Thermostats and Timeclocks. We can supply alternative colour variations for these items, most are available in white, black and silver. Please call our sales team for pricing details. 8 Ambiente Systems UK 9
Image Remote Sensors (All sensors are compatible with 43500 and 43510) Image Tools Sensor probe for use with floor temperature sensing (3m) 43560 11.66 Tacker gun for use with 40-50mm staples 44000 226.25 Thimble sensor, white 43640 18.72 SENSORS Thimble Sensor, Aluminium 43660 38.14 Thimble sensor, stainless steel 43670 60.86 Button sensor, white 43672 18.75 Tacker gun for use with 60mm staples 44001 231.46 Pipe de-reeler for coils up to 500m 44100 281.25 TOOLS Button sensor, stainless steel 43673 22.00 Button sensor on single gang plate, white 43674 28.08 Pipe de-reeler for 700m drum 44110 250.00 Conduit for use with 43560 sensor probe (3m) 52670 7.10 Manifold spanner (double ended - 30 & 27mm) 44402 37.63 Wiring Centres UH4-4 zones wiring centre (230v) 43145 77.76 WIRING CENTRES UH8-8 zones wiring centre (230v) 43161 103.13 UH1-8 zones wiring centre (12v) 43135 207.72 UH8-RF - 8 zones wireless wiring centre (230v) 43866 228.56 RF-switch 2-zone Wireless receiver 43870 85.58 10 Ambiente Systems UK 11
Conservatory Pack (up to 15m2) Screed floor construction Kit002 348.09 Compact Pump Pack (up to 30m2) Screed floor construction Kit006 842.30-1 x 120 17mm UFH Pipe (41000) - 1 x 240 17mm UFH Pipe (41010) UNDERFLOOR HEATING - SCREED FLOOR CONSTRUCTION KITS - 2 x Pipe Support Bends (41050) - 2 x 17mm manifold couplings (42200) - 15 x 1m Cliprails (41450) - 1 x Cliprail clips (200pcs) (41450) - 1 x Temperature limiter valve kit (44200). Compact Pump Pack (up to 20m2) Screed floor construction Kit004 681.56-1 x 120 17mm UFH Pipe (41000) - 2 x Pipe Support Bends (41050) - 2 x 17mm manifold couplings (42200) - 1 x Single zone pump/blender unit (41444) - 2 x Straight male ½ male 3/4 fittings (42121) - 20 x 1m Cliprails (41450) - 1 x Cliprail clips (200pcs) (41450) - 1 x Standard dial thermostat (43200) - 2 x Pipe Support Bends (41050) - 2 x 17mm manifold couplings (42200) - 1 x Single zone pump/blender unit (41444) - 2 x Straight male ½ male 3/4 fittings (42121) - 30 x 1m Cliprails (41450) - 1 x Cliprail clips (200pcs) (41450) - 1 x Standard dial thermostat (43200) 2-Zone System (up to 40m2) Screed floor construction Kit008 1,009.02-1 x 240 17mm UFH Pipe (41010) - 4 x Pipe Support Bends (41050) - 1 x 2 Port manifold (41300) - 1 x Isolating ball valves (42050) - 4 x 17mm manifold couplings (42200) - 1 x CircoMax Pump/blender unit (41434) - 40 x 1m Cliprails (41450) - 2 x Cliprail clips (200pcs) (41450) - 2 x 230v actuator valve (43015) UNDERFLOOR HEATING - SCREED FLOOR CONSTRUCTION KITS - 1 x UH4 Wiring centre (43145) - 2 x Standard dial thermostat (43200) 12 Ambiente Systems UK 13
2-Zone System (up to 50m2) Screed floor construction Kit010 1,146.28-1 x 240 17mm UFH Pipe (41010) UNDERFLOOR HEATING - SCREED FLOOR CONSTRUCTION KITS - 1 x 120m 17mm UFH Pipe (41000) - 6 x Pipe Support Bends (41050) - 1 x 3 Port manifold (41310) - 1 x Isolating ball valves (42050) - 6 x 17mm manifold couplings (42200) - 1 x CircoMax Pump/blender unit (41434) - 50 x 1m Cliprails (41450) - 2 x Cliprail clips (200pcs) (41450) - 3 x 230v actuator valve (43015) - 1 x UH4 Wiring centre (43145) - 2 x Standard dial thermostat (43200) 2-Zone System (up to 40m2) Joisted floor construction Kit012 1,572.68-1 x 240 17mm UFH Pipe (41010) - 4 x Pipe Support Bends (41050) - 1 x 2 Port manifold (41300) - 1 x Isolating ball valves (42050) - 4 x 17mm manifold couplings (42200) - 1 x CircoMax Pump/blender unit (41434) - 90 x Aluminium diffuser plates (44520) - 2 x Clout nails (400pcs) (41501) - 1 x Nail-in pipe clips (41500) - 2 x 230v actuator valve (43015) - 1 x UH4 Wiring centre (43145) - 2 x Standard dial thermostat (43200) 14 Ambiente Systems UK 15
DELIVERY RATES FOR AMBIENTE CUSTOMERS 2016 Ambiente offers a flexible and reliable delivery service throughout the UK for both parcels and pallets. Standard service is next-day delivery, with options of pre-12.00 and pre-10.30 at an extra cost. We are committed to getting your goods to you on-time, every time, as we appreciate the potential implications of delays on your project. With large stocks and a focused and dedicated despatch team, we are confident we can deliver to your expectations. PALLET SERVICE England and Wales Cost Full pallet 60 Half pallet 45 Quarter pallet 40 Scotland Cost Full pallet (postcode dependent) 60-100 Half pallet (postcode dependent) 45-80 Quarter pallet (postcode dependent) 40-65 PARCELS SERVICE UK next day delivery Cost Small Package (up to small jiffy bag) 24hr service 7.00 Standard 24hr Service 10.00 Next Working Day by Noon 15.00 Next Working Day by 10.30am 20.00 Next Working Day by 9am 62.50 Saturday AM Delivery 25.00 Please note: trade discount rates do NOT apply to these delivery rates. ambiente Ambiente Heritage House, 1 Woodside Lane, Bell Bar, Hertfordshire AL9 6DE