Pull-Out ystems ood & ire...50 ire...54 pecialty...59 Cabinet imensions...62 48 ownload at www.kv.com > Resource Library
Pull-Out ystems Customer ervice: 1.800.253.1561 49
Pull-Out ystems ood & ire Pot & Pan Pantry Organizer Mounted to KV precision ball-bearing slides eavy gauge wire frames andle allows for easy opening and closing of unit KV Eco-Friendly Frosted Nickel finish A perfect complement to any Frosted Nickel Pantry Roll-Out (see pages 51 and 55) ix movable hooks (included) have rubber grips that reduce pan sway and allow pot and pan storage to be customized PAN1700TM-FN (extended) Center-Mount Pantry Roll-Out & Baskets (see opposite page) PAN1700TM-FN PAN1700TM-FN (shown in upper cabinet) ee page 62 for recommended cabinet dimensions and clearances. POT & PAN PANTRY ORGANIZER liding Assembly idth 16-7/8" PAN1700TM-FN [429 mm] * Eco-Friendly. ee page 4 for more information. Overall Product imensions eight idth epth 19-3/8" [492 mm] 17-3/4" [451 mm] 23 to 24-5/8" [584 625 mm] Frosted Nickel*/ Birch eight per 1 14 lbs. [6.4 kg.] 50 ownload at www.kv.com > Resource Library
Center-Mount Pantry Roll-Out & Baskets ood & ire Pull-Out ystems Mounted to KV precision ball-bearing slides KV Eco-Friendly Frosted Nickel finish Center-Mount Baskets (sold separately) mount with four screws (included) Basket height can be varied in 3-3/4" increments Basket platforms are 1/2" thick Birch veneer with a UV-cured clear coat finish P2500CM-FN with BP20CM-FN Full-extension slides Center-Mount Basket (BP14CM-FN shown) BP11CM-FN Center-Mount Pantry Roll-Out (P4650CM-FN shown) Maximum # of Baskets Individual Product imensions eight idth epth Platform [ire/platform] eight per CENTER-MOUNT PANTRY ROLL-OUT P1875CM-FN 2 20-1/2" 22-1/2" [521 572 mm] 3-13/16" [97 mm] 22-1/4" [565 mm] Frosted Nickel*/Birch 1 12.6 lbs. [5.7 kg.] P2500CM-FN 2 26-3/4" 28-3/4" [679 730 mm] 3-13/16" [97 mm] 22-1/4" [565 mm] Frosted Nickel*/Birch 1 13.5 lbs. [6.1 kg.] P4250CM-FN 4 P4650CM-FN 5 P5450CM-FN 6 CENTER-MOUNT BAKET 44" 49-3/8" [1,118 1,254 mm] 48" 53-3/8" [1,219 1,356 mm] 56" 61-3/8" [1,422 1,559 mm] liding assembly width is the same as widest basket width. Load capacity not to exceed 100 lbs. * Eco-Friendly. ee page 4 for more information. 3-13/16" [97 mm] 22-1/4" [565 mm] Frosted Nickel*/Birch 1 3-13/16" [97 mm] 22-1/4" [565 mm] Frosted Nickel*/Birch 1 3-13/16" [97 mm] 22-1/4" [565 mm] Frosted Nickel*/Birch 1 BP5CM-FN 4-1/8" [105 mm] 5" [127 mm] 20-7/16" [519 mm] Frosted Nickel*/Birch 2 BP8CM-FN 4-1/8" [105 mm] 8" [203 mm] 20-7/16" [519 mm] Frosted Nickel*/Birch 2 BP11CM-FN 4-1/8" [105 mm] 11" [279 mm] 20-7/16" [519 mm] Frosted Nickel*/Birch 2 BP14CM-FN 4-1/8" [105 mm] 14" [356 mm] 20-7/16" [519 mm] Frosted Nickel*/Birch 2 BP17CM-FN 4-1/8" [105 mm] 17" [432 mm] 20-7/16" [519 mm] Frosted Nickel*/Birch 2 BP20CM-FN 4-1/8" [105 mm] 20" [508 mm] 20-7/16" [519 mm] Frosted Nickel*/Birch 2 15.6 lbs. [7.1 kg.] 15.9 lbs. [7.2 kg.] 17 lbs. [7.7 kg.] 6.3 lbs. [2.9 kg.] 8.8 lbs. [4.0 kg.] 12.1 lbs. [5.5 kg.] 13.5 lbs. [6.1 kg.] 16 lbs. [7.3 kg.] 17.4 lbs. [7.9 kg.] ee page 62 for recommended cabinet dimensions and clearances. Customer ervice: 1.800.253.1561 51
Pull-Out ystems ood & ire lide-out Base Blind Corner Unit KV Eco-Friendly Frosted Nickel finish Provides easy access to hard-to-reach blind corners Opens by manually pulling each half of the unit out of cabinet in three easy steps KV heavy-duty precision ball-bearing slides Left and Right hand options available Includes four adjustable frosted nickel wire and birch veneer base baskets (11-3/4" wide x 17-3/4" deep) BBC-R-15-FN (for RIGT blind corner cabinet) Position 1 (closed) Position 2 Blind portion of the cabinet is on the LEFT BBC-L-15-FN (Position 2) For LEFT base blind corner cabinets (top view) Cabinet door is on RIGT side of cabinet Position 3 1-1/4" [32 mm] Clearance for Adjacent Cabinet oor Position 4 (fully open) Includes four adjustable frosted nickel wire and birch veneer base baskets (11-3/4" wide x 17-3/4" deep) Cabinet door is on LEFT side of cabinet BBC-R-15-FN (Position 2) For RIGT base blind corner cabinets (top view) Blind portion of the cabinet is on the RIGT ee page 62 for recommended cabinet dimensions and clearances. liding Assembly idth * Eco-Friendly. ee page 4 for more information. Assembled Product imensions eight idth epth eight per LIE-OUT BAE BLIN CORNER UNIT LEFT BLIN CORNER UNIT BBC-L-15-FN 14" [356 mm] 19-3/4" [502 mm] 26-3/16" [665 mm] 22-3/16" [564 mm] Frosted Nickel*/ood 1 63.9 lbs. [29 kg.] BBCT-L-15-FN 14" [356 mm] 26-3/4" [679 mm] 26-3/16" [665 mm] 22-3/16" [564 mm] Frosted Nickel*/ood 1 67.6 lbs. [30.7 kg.] RIGT BLIN CORNER UNIT BBC-R-15-FN 14" [356 mm] 19-3/4" [502 mm] 26-3/16" [665 mm] 22-3/16" [564 mm] Frosted Nickel*/ood 1 63.9 lbs. [29.0 kg.] BBCT-R-15-FN 14" [356 mm] 26-3/4" [679 mm] 26-3/16" [665 mm] 22-3/16" [564 mm] Frosted Nickel*/ood 1 67.6 lbs. [30.7 kg.] 52 ownload at www.kv.com > Resource Library
Pot & Pan Caddy KV Eco-Friendly Frosted Nickel finish ood & ire Pull-Out ystems Two separate pull-out sections provide flexible pot and pan storage and access Pre-finished Birch veneer platforms with contoured skirting and Frosted Nickel heavy-gauge wire fencing Easy installation with only four screws P27-FN (Top and bottom extended) Top & bottom extended P ood & iretray ivider Roll-Outs KV Eco-Friendly Frosted Nickel finish eavy gauge Frosted Nickel wire frames Birch veneer base platform lides out on heavy-duty, full-extension ball-bearing slides Birch veneer base platform POT & PAN CAY liding Assembly idth Tray ivider Roll-Out (TRO-FN-9 shown) [ire/platform] eight per P21-FN 19-1/2" [495 mm] 19-1/2" [495 mm] 14-1/4" [362 mm] 22-1/4" [565 mm] Frosted Nickel*/Birch 1 32.6 lbs. [14.8 kg.] P27-FN 25-1/2" [648 mm] 25-1/2" [648 mm] 14-1/4" [362 mm] 22-1/4" [565 mm] Frosted Nickel*/Birch 1 33.8 lbs. [15.3 kg.] OO & IRE TRAY IVIER ROLL-OUT TRO Assembled Product imensions idth eight epth TRO-FN-6 5-1/2" [140 mm] 5-1/2" [140 mm] 14" [356 mm] 22-1/4" [565 mm] Frosted Nickel*/Birch 1 11.5 lbs. [5.2 kg.] TRO-FN-9 8-1/2" [216 mm] 8-1/2" [216 mm] 14" [356 mm] 22-1/4" [565 mm] Frosted Nickel*/Birch 1 13.9 lbs. [6.3 kg.] * Eco-Friendly. ee page 4 for more information. ee page 62 for recommended cabinet dimensions and clearances. Customer ervice: 1.800.253.1561 53
Pull-Out ystems ire Center-Mount Pantry Roll-Out & Baskets Variety of height ranges available Center-Mount Baskets (sold separately) mount with four screws (included) to the center of Pantry Roll-Out Basket height can be varied in 3-3/4" increments Mounted to KV precision ball-bearing slides P5450CM- Full-extension slides Center-Mount Basket (BP10CM- shown) Center-Mount Basket (BP20CM- shown) Center-Mount Pantry Roll-Out (P5450CM- shown) ee page 62 for recommended cabinet dimensions and clearances. Maximum # of Baskets CENTER-MOUNT PANTRY ROLL-OUT BP20CM- 20" [508 mm] 4-1/8" [105 mm] 20-7/16" [519 mm] hite 2 14.3 lbs. [6.5 kg.] liding assembly width is same as widest basket width. Load capacity not to exceed 100 lbs. eight per P1875CM- 2 3-13/16" [97 mm] 20-1/2" 22-1/2" [521 572 mm] 22-1/4" [565 mm] hite 1 12.1 lbs. [5.5 kg.] P2500CM- 2 3-13/16" [97 mm] 26-3/4" 28-3/4" [679 730 mm] 22-1/4" [565 mm] hite 1 13.7 lbs. [6.2 kg.] P4250CM- 4 3-13/16" [97 mm] 44" 49-3/8" [1,118 1,254 mm] 22-1/4" [565 mm] hite 1 18.8 lbs. [8.5 kg.] P4650CM- 5 3-13/16" [97 mm] 48" 53-3/8" [1,219 1,356 mm] 22-1/4" [565 mm] hite 1 19.3 lbs. [8.8 kg.] P5450CM- 6 3-13/16" [97 mm] 56" 61-3/8" [1,422 1,559 mm] 22-1/4" [565 mm] hite 1 20.4 lbs. [9.3 kg.] CENTER-MOUNT BAKET Individual Product imensions idth eight epth BP5CM- 5" [127 mm] 4-1/8" [105 mm] 20-7/16" [519 mm] hite 2 6.8 lbs. [3.1 kg.] BP8CM- 8" [203 mm] 4-1/8" [105 mm] 20-7/16" [519 mm] hite 2 8.4 lbs. [3.8 kg.] BP11CM- 11" [279 mm] 4-1/8" [105 mm] 20-7/16" [519 mm] hite 2 9.6 lbs. [4.4 kg.] BP14CM- 14" [356 mm] 4-1/8" [105 mm] 20-7/16" [519 mm] hite 2 11.4 lbs. [5.2 kg.] BP17CM- 17" [432 mm] 4-1/8" [105 mm] 20-7/16" [519 mm] hite 2 12.8 lbs. [5.8 kg.] 54 ownload at www.kv.com > Resource Library
ide-mount Pantry Roll-Out & Baskets KV Eco-Friendly Frosted Nickel finish or hite Basket height can be varied in 4" increments ide-mount Baskets (sold separately) mount to hooks on side of ide-mount Pantry Roll-Out ire Pull-Out ystems 3-1/4" [83 mm] eight Full-extension slides P5450FE-FN with BP10-FN ide-mount Pantry Roll-Out (P5450FE shown) IE-MOUNT PANTRY ROLL-OUT ide-mount Basket (old separately.) idth IE-MOUNT BAKET For epth & eight, see drawing to left. Individual Product imensions idth eight epth eight per BP4-FN 4" [102 mm] Frosted Nickel* 10 13.7 lbs. [6.2 kg.] BP5-FN 5" [127 mm] Frosted Nickel* 10 15.1 lbs. [6.8 kg.] BP6-FN 6" [152 mm] Frosted Nickel* 10 16.2 lbs. [7.3 kg.] BP7-FN 7" [178 mm] Frosted Nickel* 10 17.7 lbs. [8.0 kg.] BP8-FN 8" [203 mm] Frosted Nickel* 10 18.6 lbs. [8.4 kg.] BP9-FN 9" [229 mm] Frosted Nickel* 10 19.7 lbs. [8.9 kg.] BP10-FN 10" [254 mm] Frosted Nickel* 10 21 lbs. [9.5 kg.] BP12-FN 12" [305 mm] Frosted Nickel* 10 26.3 lbs. [11.9 kg.] BP4-4" [102 mm] hite 10 13.7 lbs. [6.2 kg.] BP5-5" [127 mm] hite 10 15.1 lbs. [6.8 kg.] BP6-6" [152 mm] hite 10 16.2 lbs. [7.3 kg.] BP7-7" [178 mm] hite 10 17.7 lbs. [8.0 kg.] BP8-8" [203 mm] hite 10 18.6 lbs. [8.4 kg.] BP9-9" [229 mm] hite 10 19.7 lbs. [8.9 kg.] BP10-10" [254 mm] hite 10 21 lbs. [9.5 kg.] BP12-12" [305 mm] hite 10 26.3 lbs. [11.9 kg.] eight per P4250FE-FN 3-13/16" [97 mm] 44" 49-3/8" [1,118 1,254 mm] 22-1/4" [565 mm] Frosted Nickel* 1 18.6 lbs. [8.4 kg.] P4650FE-FN 3-13/16" [97 mm] 48" 53-3/8" [1,219 1,356 mm] 22-1/4" [565 mm] Frosted Nickel* 1 19.4 lbs. [8.8 kg.] P5450FE-FN 3-13/16" [97 mm] 56" 61-3/8" [1,422 1,559 mm] 22-1/4" [565 mm] Frosted Nickel* 1 20.8 lbs. [9.4 kg.] P425OFE- 3-13/16" [97 mm] 44" 49-3/8" [1,118 1,254 mm] 22-1/4" [565 mm] hite 1 18.7 lbs. [8.5 kg.] P4650FE- 3-13/16" [97 mm] 48" 53-3/8" [1,219 1,356 mm] 22-1/4" [565 mm] hite 1 19.8 lbs. [9.0 kg.] P5050FE- 3-13/16" [97 mm] 52" 57-3/8" [1,321 1,457 mm] 22-1/4" [565 mm] hite 1 20 lbs. [9.1 kg.] P5450FE- 3-13/16" [97 mm] 56" 61-3/8" [1,422 1,559 mm] 22-1/4" [565 mm] hite 1 20.9 lbs. [9.5 kg.] P6500FE- 3-13/16" [97 mm] 66-1/2" 71-7/8" [1,689 1,826 mm] 22-1/4" [565 mm] hite 1 22.5 lbs. [10.2 kg.] liding assembly width is equal to Pantry Roll-Out width plus total width of baskets being applied. Load capacity not to exceed 100 lbs. * Eco-Friendly. ee page 4 for more information. 21-1/2" [546 mm] epth ide-mount Basket (BP6- shown) ee page 62 63 for recommended cabinet dimensions and clearances. Customer ervice: 1.800.253.1561 55
Pull-Out ystems ire Base Cabinet Organizer Features six vertical ide-mount Basket positions (BCO20E- has two vertical basket positions. ide-mount Baskets sold separately on page 55.) Basket height can be varied in 3-3/4" increments 75 lb. class rated, bi-directional slides are non-handed BC020E- with BP6- ide-mount Baskets (old separately. ee pg. 55.) Base Cabinet Organizer (BCO2456- shown) ee page 63 for recommended cabinet dimensions and clearances. BAE CABINET ORGANIZER liding Assembly idth BCO2OE- ** BCO2456- *** Assembled Product imensions idth eight epth 1-1/2" [38 mm] 1-3/8" [35 mm] 21-3/16" [538 mm] 25" [635 mm] ** Total sliding assembly width is equal to total width of ide-mount Basket application plus 15/16" [24 mm]. *** Total sliding assembly width is equal to total width of ide-mount Basket application plus 1-3/8" [35 mm]. 21-11/16" [551 mm] 22" [559 mm] hite 1 hite 1 eight per 6.1 lbs. [2.8 kg.] 5.8 lbs. [2.6 kg.] 56 ownload at www.kv.com > Resource Library
Base Roll-Out Four ide-mount Basket positions per side (ide-mount Baskets sold separately. ee page 55.) Basket height can be varied in 3-3/4" increments ire Pull-Out ystems B1700- with BP4- and BP6- Base Roll-Out (B1700- shown) ide-mount Baskets (old separately. ee pg. 55.) Tray ivider Roll-Outs KV epoxy-coated roller slides liding base assembly is 1/2"-thick laminated melamine mounted on epoxy-coated slides and is fully assembled eavy-gauge steel wire partitions section off storage areas TRO9- BAE ROLL-OUT liding Assembly idth Assembled Product imensions idth eight epth B1700-6-3/4" [171 mm]* 7-9/16" [192 mm] 19-1/4" [489 mm] 21-11/16" [551 mm] hite 1 TRAY IVIER ROLL-OUT Tray ivider Roll-Out (TRO9- shown) TR06-5-7/16" [138 mm] 6" [152 mm] 19-1/2" [495 mm] 22" [559 mm] hite 1 TR09-8-7/16" [214 mm] 9" [229 mm] 19-1/2" [495 mm] 22" [559 mm] hite 1 * Total sliding assembly width is equal to total width of ide-mount Basket application plus 5/8" [16 mm]. eight per 7.0 lbs. [3.2 kg.] 9.0 lbs. [4.1 kg.] 11.9 lbs. [5.4 kg.] ee page 63 for recommended cabinet dimensions and clearances. Customer ervice: 1.800.253.1561 57
Pull-Out ystems ire Multi-Use Baskets KV Eco-Friendly Frosted Nickel finish KV epoxy-coated roller slide Accessory and Upper Baskets are non-handed, removable and offset to avoid plumbing for undersink applications Removable Accessory Basket Fixed andle Full-Extension lides Multi-Use Basket (MUB14-FN shown) eavy-gauge ire Multi-Use Basket with andle & Upper Basket (UB shown) Multi-Use Basket (MUB shown) LOER BAKET IMENION UPPER BAKET IMENION idth eight epth idth eight epth GUB11-FN 11" 4" 18" 5" 2-7/8" 17-1/2" GUB14-FN 14" 4" 18" 5" 2-7/8" 17-1/2" UB11-11" 4-1/8" 18-3/4" 5" 2-7/8" 17-3/8" UB14-14" 4-1/8" 18-3/4" 5" 2-7/8" 17-3/8" Multi-Use Basket with Upper Basket (UB11-TM- shown) UB11TM- 11" 4-1/8" 18" UB14TM- 14" 4-1/8" 18" MU11-11" 4-1/8" 18-3/4" MU14-14" 4-1/8" 18-3/4" ee page 63 for recommended cabinet dimensions and clearances. liding Assembly idth MULTI-UE BAKET IT ANLE AN ACCEORY BAKET * ee page 4 for Frosted Nickel information. Assembled Product imensions idth eight epth eight per GUB11-FN 11-7/16" [291 mm] 12-1/8" [308 mm] 15-7/16" [392 mm] 18-3/4" [476 mm] Frosted Nickel* 1 8.9 lbs. [4.0 kg.] GUB14-FN 14-7/16" [367 mm] 15-1/8" [384 mm] 15-7/16" [392 mm] 18-3/4" [476 mm] Frosted Nickel* 1 9.7 lbs. [4.4 kg.] UB11-11-7/16" [291 mm] 12-1/8" [308 mm] 15-1/2" [394 mm] 18-3/4" [476 mm] hite 1 7.6 lbs. [3.4 kg.] UB14-14-7/16" [367 mm] 15-1/8" [384 mm] 15-1/2" [394 mm] 18-3/4" [476 mm] hite 1 8.2 lbs. [3.7 kg.] MULTI-UE BAKET IT UPPER BAKET UB11TM- 11-7/16" [291 mm] 12-1/8" [308 mm] 9-5/16" [237 mm] 19-1/8" [486 mm] hite 1 6.1 lbs. [2.8 kg.] UB14TM- 14-7/16" [367 mm] 15-1/8" [384 mm] 9-5/16" [237 mm] 19-1/8" [486 mm] hite 1 7.2 lbs. [3.3 kg.] MULTI-UE BAKET MUB11-FN 11-3/8" [289 mm] 11-3/4" [299 mm] 5-5/16" [135 mm] 20" [508 mm] Frosted Nickel* 1 8.5 lbs. [3.9 kg.] MUB14-FN 14-3/8" [365 mm] 14-3/4" [375 mm] 5-5/16" [135 mm] 20" [508 mm] Frosted Nickel* 1 9.5 lbs. [4.3 kg.] MUB17-FN 17-3/8" [441 mm] 17-3/8" [441 mm] 5-3/16" [132 mm] 20" [508 mm] Frosted Nickel* 1 11 lbs. [4.9 kg.] MU11-11-7/16" [291 mm] 12-1/8" [308 mm] 5-3/16" [132 mm] 18-3/4" [476 mm] hite 1 4.8 lbs. [2.2 kg.] MU14-14-7/16" [367 mm] 15-1/8" [384 mm] 5-3/16" [132 mm] 18-3/4" [476 mm] hite 1 5.7 lbs. [2.6 kg.] 58 ownload at www.kv.com > Resource Library
pecialty Pull-Out ystems Appliance Lift Kitchen appliances raise effortlessly with a gas cylinder assist and then lock securely into place Can be outfitted with a custom block platform or a quality KV pre-made maple wood platform Lift can be positioned at two different levels: flush with counter or 2" below counter 1/2" [13 mm] 13" [330 mm] Upper Face Frame AL-20 with AL13.5-1 (up position) 23-61/64" [608 mm] 1/2" [13 mm] 16" [406 mm] 1/2" [13 mm] Face Frame NOTE: Install 1/2" down and 1/2" back from upper Face Frame (as shown) Platform (AL13.5-1 or AL16.5-1) AL-20 with AL13.5-1 (down position) escription idth eight epth APPLIANCE LIFT PART AL-20 AL13.5-1 AL16.5-1 AL-BKT AL-BKT (Accessory Basket) ardware Mechanism (left and right arm) 13-1/2" Maple Block Platform 16-1/2" Maple Block Platform Accessory Basket Platform urface + 2-1/2" [64 mm] 13-1/2" [343 mm] 16-1/2" [419 mm] 9-7/8" [251 mm] 23-61/64" [608 mm] 1-1/2" [38 mm] 1-1/2" [38 mm] 4-7/8" [124 mm] AL-BKT (Accessory Basket mounts under platform) Maximum of 13" [330 mm] or Platform epth 18" [457 mm] 18" [457 mm] 12-7/8" [327 mm] Pull up on right and left mechanism handles to unlock and lower Appliance Lift Units per Platinum 1 Maple 1 Maple 1 Black/Birch 1 AL-20 (ardware Mechanism) eight per 13.7 lbs. [6.2 kg.] 9.9 lbs. [4.5 kg.] 12.3 lbs. [5.6 kg.] 4.2 lbs. [1.9 kg.] ee page 62 for recommended cabinet dimensions and clearances. Customer ervice: 1.800.253.1561 59
Pull-Out ystems pecialty ampers amper is removable (except Tilt-Out hampers) (ee page 14 for Roll-Out plastic hamper replacement bin information.) Aerated plastic and open wire frame hampers make laundry storage easy Roll-Out Plastic amper (P15-1-60- shown) KV 1" over-travel heavy-duty precision ball-bearing slides Roll-Out Plastic amper (P15-1-60- shown) QT60PB- (ee page 14 for Replacement Bin information) KV epoxy-coated roller slides Roll-Out ire amper (1515- shown) esigned for bottomhinged cabinet door (hinge not supplied) Tilt-Out ire amper (T01716- shown) Assembly idth Assembled Product imensions idth eight epth Capacity per Bin Number of Bins eight per ROLL-OUT PLATIC AMPER ee page 62 for recommended cabinet dimensions and clearances. P15-1-60-14-5/16" [364 mm] 15-1/8" [384 mm] 21-1/16" [535 mm] 19-1/8" [486 mm] hite 60 qt. 1 1 11.8 lbs. [5.4 kg.] PM15-1-60-* 14-5/16" [364 mm] 15-1/8" [384 mm] 21-1/16" [535 mm] 19-1/8" [486 mm] hite 60 qt. 1 1 13.6 lbs. [6.2 kg.] ROLL-OUT IRE AMPER 1215-11-7/16" [291 mm] 12-1/8" [308 mm] 14-5/8" [371 mm] 18-3/4" [476 mm] hite 40 qt. 1 1 8.1 lbs. [3.7 kg.] 1218-11-7/16" [291 mm] 12-1/8" [308 mm] 18-7/8" [479 mm] 18-3/4" [476 mm] hite 53 qt. 1 1 9 lbs. [4.1 kg.] 1515-14-7/16" [367 mm] 15-1/8" [384 mm] 14-5/8" [371 mm] 18-3/4" [476 mm] hite 53 qt. 1 1 9.2 lbs. [4.2 kg.] 1518-14-7/16" [367 mm] 15-1/8" [384 mm] 18-7/8" [479 mm] 18-3/4" [476 mm] hite 71 qt. 1 1 11 lbs. [5.0 kg.] M1215-11-7/16" [291 mm] 12-1/8" [308 mm] 14-5/8" [371 mm] 16" [406 mm] hite 33 qt. 1 1 7.1 lbs. [3.2 kg.] TILT-OUT IRE AMPER TO1710-1- 10-1/2" [267 mm] 10-1/2" [267 mm] 17-3/4" [451 mm] 18-13/16" [478 mm] hite 39 qt. 1 1 6.2 lbs. [2.8 kg.] TO1710-10-1/2" [267 mm] 10-1/2" [267 mm] 17-3/4" [451 mm] 18-13/16" [478 mm] hite 39 qt. 1 4 42.8 lbs. [19.4 kg.] TO1713-1- 13-1/2" [343 mm] 13-1/2" [343 mm] 17-3/4" [451 mm] 18-13/16" [478 mm] hite 52 qt. 1 1 7.6 lbs. [3.4 kg.] TO1713-13-1/2" [343 mm] 13-1/2" [343 mm] 17-3/4" [451 mm] 18-13/16" [478 mm] hite 52 qt. 1 4 48.1 lbs. [21.8 kg.] TO1716-1- 16-1/2" [419 mm] 16-1/2" [419 mm] 17-3/4" [451 mm] 18-13/16" [478 mm] hite 65 qt. 1 1 8.7 lbs. [3.9 kg.] TO1716-16-1/2" [419 mm] 16-1/2" [419 mm] 17-3/4" [451 mm] 18-13/16" [478 mm] hite 65 qt. 1 4 41.8 lbs. [19.0 kg.] *Includes door-mounting hardware for 1-1/2" face frame cabinetry. 60 ownload at www.kv.com > Resource Library
pecialty Pull-Out ystems Pull-Out Towel Bar Pull-Out Towel Bar has three bars that pull out together on a friction-free ball-bearing carrier Mounts to right or left side of cabinet Pull-Out Towel Bar (P793 ANO) Pull-Out Towel Bar (P793 ANO) Bars pull out together Pull-Out Towel Bar (P793 ANO) PULL-OUT TOEL BAR liding Assembly idth Assembled Product imensions idth eight epth eight per P793 ANO 4-13/16" [122 mm] 4-13/16" [122 mm] 1-5/16" [33 mm] 17-3/4" [451 mm] Anochrome 10 23.3 lbs. [10.6 kg] ee page 62 for recommended cabinet dimensions and clearances. Customer ervice: 1.800.253.1561 61
Pull-Out ystems Cabinet imensions Cabinet imensions Min. Cabinet Opening Minimum Interior Cabinet imensions Minimum Cabinet Clearances idth O idth eight epth Front F Back B lide-out Base Blind Corner Units BBC-L-15-FN 14-1/2" [368 mm] 26-11/16" [678 mm] 20-1/4" [514 mm] 22-11/16" [576 mm] 1/4" [6 mm] 1/4" [6 mm] BBCT-L-15-FN 14-1/2" [368 mm] 26-11/16" [678 mm] 27-1/4" [692 mm] 22-11/16" [576 mm] 1/4" [6 mm] 1/4" [6 mm] BBC-R-15-FN 14-1/2" [368 mm] 26-11/16" [678 mm] 20-1/4" [514 mm] 22-11/16" [576 mm] 1/4" [6 mm] 1/4" [6 mm] BBCT-R-15-FN 14-1/2" [368 mm] 26-11/16" [678 mm] 27-1/4" [692 mm] 22-11/16" [576 mm] 1/4" [6 mm] 1/4" [6 mm] Center-Mount Pantry Roll-Outs P1875CM-FN * * 20-1/2" [520 mm] 22-1/4" [565 mm] P2500CM-FN * * 26-3/4" [679 mm] 22-1/4" [565 mm] P4250CM-FN * * 44" [1,117 mm] 22-1/4" [565 mm] P4650CM-FN * * 48" [1,219 mm] 22-1/4" [565 mm] P5450CM-FN * * 56" [1,422 mm] 22-1/4" [565 mm] Pot & Pan Pantry Organizer PAN1700TM-FN 17-1/2" [444 mm] 17-1/2" [444 mm] 19-3/8" [492 mm] 23-3/4" [603 mm] 1/2" [13 mm] Pot & Pan Caddy P21-FN 20" [508 mm] 20" [508 mm] 14-3/4" [375 mm] 22-3/4" [578 mm] 1/4" [6 mm] 1/4" [6 mm] P27-FN 26" [660 mm] 26" [660 mm] 14-3/4" [375 mm] 22-3/4" [578 mm] 1/4" [6 mm] 1/4" [6 mm] ood & ire Tray ivider Roll-Outs TRO-FN-6 6" [152 mm] 6" [152 mm] 14-1/2" [368 mm] 22-3/4" [578 mm] 1/4" [6 mm] 1/4" [6 mm] TRO-FN-9 9" [229 mm] 9" [229 mm] 14-1/2" [368 mm] 22-3/4" [578 mm] 1/4" [6 mm] 1/4" [6 mm] Appliance Lift (see page 59 for additional clearances) AL-20 Platform idth + 1" [25 mm] Platform idth + 2-1/2" [64 mm] 25" [634 mm] Minimum of 16-1/2" [419 mm] OR platform depth 1/2" [13 mm] 1/2" [13 mm] ampers P15-160- 15" [381 mm] 15-5/8" [397 mm] 21-9/16" [548 mm] 19-5/8" [498 mm] 1/4" [6 mm] 1/4" [6 mm] PM15-1-60-15" [381 mm] 15-5/8" [397 mm] 21-9/16" [548 mm] 19-5/8" [498 mm] 1/4" [6 mm] 1/4" [6 mm] 1215-12" [305 mm] 12-5/8" [321 mm] 15-1/8" [384 mm] 19-1/4" [489 mm] 1/4" [6 mm] 1/4" [6 mm] 1218-12" [305 mm] 12-5/8" [321 mm] 19-3/8" [492 mm] 19-1/4" [489 mm] 1/4" [6 mm] 1/4" [6 mm] 1515-15" [381 mm] 15-5/8" [397 mm] 15-1/8" [384 mm] 19-1/4" [489 mm] 1/4" [6 mm] 1/4" [6 mm] 1518-15" [381 mm] 15-5/8" [397 mm] 19-3/8" [492 mm] 19-1/4" [489 mm] 1/4" [6 mm] 1/4" [6 mm] M1215-12" [305 mm] 12-5/8" [321 mm] 15-1/8" [384 mm] 16-1/2" [419 mm] 1/4" [6 mm] 1/4" [6 mm] TO1710-1- 11" [279 mm] 11" [279 mm] 18-1/4" [464 mm] 19-5/16" [491 mm] 1/4" [6 mm] 1/4" [6 mm] TO1710-11" [279 mm] 11" [279 mm] 18-1/4" [464 mm] 19-5/16" [491 mm] 1/4" [6 mm] 1/4" [6 mm] TO1713-1- 14" [356 mm] 14" [356 mm] 18-1/4" [464 mm] 19-5/16" [491 mm] 1/4" [6 mm] 1/4" [6 mm] TO1713-14" [356 mm] 14" [356 mm] 18-1/4" [464 mm] 19-5/16" [491 mm] 1/4" [6 mm] 1/4" [6 mm] TO1716-1- 17" [432 mm] 17" [432 mm] 18-1/4" [464 mm] 19-5/16" [491 mm] 1/4" [6 mm] 1/4" [6 mm] TO1716-17" [432 mm] 17" [432 mm] 18-1/4" [464 mm] 19-5/16" [491 mm] 1/4" [6 mm] 1/4" [6 mm] Pull-Out Towel Bar P79 3 ANO 5-5/16" [135 mm] 5-5/16" [135 mm] 1-13/16" [46 mm] 18-1/4" [464 mm] 1/4" [6 mm] 1/4" [6 mm] Center-Mount Pantry Roll-Out P1875CM- * * 20-1/2" [520 mm] 22-1/4" [565 mm] P2500CM- * * 26-3/4" [670 mm] 22-1/4" [565 mm] P4250CM- * * 44" [1,117 mm] 22-1/4" [565 mm] P4650CM- * * 48" [1,219 mm] 22-1/4" [565 mm] P5450CM- * * 56" [1,422 mm] 22-1/4" [565 mm] ide-mount Pantry Roll-Out P425OFE- * * 44" [1,117 mm] 22-1/4" [565 mm] P4650FE- * * 48" [1,219 mm] 22-1/4" [565 mm] * Minimum Cabinet Opening idth AN Minimum Cabinet Interior idth equals total width of completely assembled unit with all baskets applied, plus 1/2" clearance per side (1" total clearance for center-mounted units, 1/2" side clearance for side-mounted units). imensions shown are recommended minimum cabinet dimensions and clearances. 62 ownload at www.kv.com > Resource Library
Cabinet imensions Pull-Out ystems P5050FE- * * 52" [1320 mm] 22-1/4" [565 mm] P5450FE- * * 56" [1422 mm] 22-1/4" [565 mm] P6500FE- * * 66-1/2" [1689 mm] 22-1/4" [565 mm] P4250FE-FN * * 44" [1117 mm] 22-1/4" [565 mm] P4650FE-FN * * 48 [1219 mm] 22-1/4" [565 mm] P5450FE-FN * * 56" [1422 mm] 22-1/4" [565 mm] Base Cabinet Organizer BCO2OE- * * 21-11/16" [551 mm] 22-3/16" [564 mm] 1/4" [6 mm] 1/4" [6 mm] BCO2456- * * 25-1/2" [648 mm] 22-1/2" [572 mm] 1/4" [6 mm] 1/4" [6 mm] Base Roll-Out B1700- * * 19-3/4" [502 mm] 22-3/16" [564 mm] 1/4" [6 mm] 1/4" [6 mm] Multi-Use Baskets GUB11-FN 12" [305 mm] 12-5/8" [321 mm] 15-15/16" [405 mm] 19-1/4" [489 mm] 1/4" [6 mm] 1/4" [6 mm] GUB14-FN 15" [381 mm] 15-5/8" [397 mm] 15-15/16" [405 mm] 19-1/4" [489 mm] 1/4" [6 mm] 1/4" [6 mm] UB11-12" [305 mm] 12-5/8" [321 mm] 16" [406 mm] 19-1/4" [489 mm] 1/4" [6 mm] 1/4" [6 mm] UB14-15" [381 mm] 15-5/8" [397 mm] 16" [406 mm] 19-1/4" [489 mm] 1/4" [6 mm] 1/4" [6 mm] UB11TM- 12" [305 mm] 12-5/8" [321 mm] 9-13/16" [249 mm] 19-5/8" [498 mm] 1/4" [6 mm] 1/4" [6 mm] UB14TM- 15" [381 mm] 15-5/8" [397 mm] 9-13/16" [249 mm] 19-5/8" [498 mm] 1/4" [6 mm] 1/4" [6 mm] MUB11-FN 11-1/2" [292 mm] 12" [305 mm] 5-11/16" [144 mm] 20-1/4" [514 mm] 1/4" [6 mm] 1/4" [6 mm] MUB14-FN 14-1/2" [368 mm] 15" [381 mm] 5-11/16" [144 mm] 20-1/4" [514 mm] 1/4" [6 mm] 1/4" [6 mm] MUB17-FN 17-1/2" [444 mm] 18" [457 mm] 5-11/16" [144 mm] 20-1/4" [514 mm] 1/4" [6 mm] 1/4" [6 mm] MU11-12" [305 mm] 12-5/8" [321 mm] 5-11/16" [144 mm] 19-1/4" [489 mm] 1/4" [6 mm] 1/4" [6 mm] MU14-15" [381 mm] 15-5/8" [397 mm] 5-11/16" [144 mm] 19-1/4" [489 mm] 1/4" [6 mm] 1/4" [6 mm] Tray ivider Roll-Outs TR06-6" [152 mm] 6-1/2" [165 mm] 20" [508 mm] 22-1/2" [572 mm] 1/4" [6 mm] 1/4" [6 mm] TR09-9" [229 mm] 9-1/2" [241 mm] 20" [508 mm] 22-1/2" [572 mm] 1/4" [6 mm] 1/4" [6 mm] Example of Frameless / Euro-tyle Cabinet Application B rawer F Product Top View Front View Product 1/2" [13 mm] (oes not apply to top-mounted Pantry Roll-Out units.) Cabinet Frame O 1/4" [6 mm]** 1/4" [6 mm]** Example of Face Frame Cabinet Application B rawer F Product Top View Front View Product 1/2" [13 mm] (oes not apply to top-mounted Pantry Roll-Out units.) Face Frame Face Frame O 1/4" [6 mm]** 1/4" [6 mm]** * Minimum Cabinet Opening idth AN Minimum Cabinet Interior idth equals total width of completely assembled unit with all baskets applied, plus 1/2" clearance per side (1" total clearance for center-mounted units, 1/2" side clearance for side-mounted units). imensions shown are recommended minimum cabinet dimensions and clearances. ** lide-out Base Blind Corner Units and Base Cabinet Organizers require 1/2" side clearance on one side, not both. Customer ervice: 1.800.253.1561 63