SURFACE MOUNT. (2) D dimming (0-10V) 5% standard

Similar documents
SURFACE MOUNT. See page 3 for DLC Approved options

Please consult factory for other lumen packages

RECESSED MOUNT. 2 StepLens

WALL MOUNT DIRECT. Project. Type. Notes

WALL MOUNT DIRECT/INDIRECT. Project. Type. Notes

Project. Type. Notes. (3) D dimming (0-10V) 5% standard

PENDANT ASYMMETRIC MOUNT - DIRECT. Project. Type. Notes

WALL MOUNT - DIRECT/INDIRECT 0.25" Glo Lens 0.25"

Project. Type. Notes PRODUCT ID NOM.LUMENS/FT CRI COLOUR TEMP. SHIELDING LENGTH/FT FINISH VOLTAGE

SURFACE MOUNT. Project. Type. Notes

RECESSED MOUNT. Outputs between listed min and max are available. Consult factory for outputs outside of the listed range.

5 YEAR CONTROL SENSORS

PENDANT MOUNT - DIRECT

(5) For 347V only (6) Specify system (7) Please consult factory; see page 2

Project. Type. Notes. C custom UNV universal BI bi-level dimming +NL(#) night light circuit (7) O other (6) +GTD(#) generator transfer device (7)

RECESSED T-Bar & Drywall. Project. Type. Notes AULED 14 SO

PENDANT ASYMMETRIC MOUNT - DIRECT. Project. Type. Notes

Project. Type. Notes PRODUCT ID NOM.LUMENS/FT CRI COLOUR TEMP. SHIELDING LENGTH/FT FINISH

PRODUCT ID NOM.LUMENS/FT CRI COLOUR TEMP. SHIELDING LENGTH/FT FINISH VOLTAGE PRLED

PENDANT MOUNT - DIRECT. Project. Type. Notes

SURFACE ASYMMETRIC MOUNT. Project. Type. Notes

RECESSED T-Bar & Drywall. Project. Type. Notes. 3 7/8" 98mm

WALL MOUNT - DIRECT/INDIRECT

RECESSED T-Bar & Drywall. Project. Type. Notes 47 15/16" 47 7/8" 48" between T-Bar SIDE VIEW

PENDANT MOUNT. Project. Type. Notes

PENDANT MOUNT - DIRECT. Project. Type. Notes

Notes: 4 3/4" 121mm. (1) Compatible with Redwood systems

Notes: 4 3/4" 121mm. (1) Compatible with Redwood systems. See integrated controls guide for further details

SURFACE - WITH LENS AND ACCENT OPTIONS 3 1/32. dia. S surface drywall ceiling SC surface solid ceiling

PENDANT MOUNT - DIRECT/INDIRECT

PENDANT ASYMMETRIC MOUNT

RECESSED T-BAR & DRYWALL. Project. Type. Notes. 0.5 StepLens. StepLens

RECESSED ASYMMETRIC MOUNT. Project. Type. Notes TECHZONE TM AND LOGIX TM COMPATIBLE

PENDANT SEMI-DIRECT. Applies to both UP & DOWN. Consult factory for other lumen packages

SURFACE FLUSH FLUSH 5 1 / / /4 2 1 /16

PERIMETER - RECESSED. Regressed 3" BMPRLED OPRI ( 1) 14 PRODUCT ID LINEAR OR CORNER QTY TOTAL LENGTH. 3D VIEW - Inside Corner Pattern

PERIMETER - RECESSED. Flush BBPRLED OPRI ( 1) 14 PRODUCT ID LINEAR OR CORNER QTY TOTAL LENGTH. 3D VIEW - Inside Corner Pattern

Notes: 4" 102mm. (1) Compatible with Redwood systems

3 1/32. dia. If application includes Accents and separate controls, select 2 circuits.

RECESSED - WITH StepLens OPTION. TECHZONE TM AND LOGIX TM COMPATIBLE for more info see page 4 See page 2 for DLC Approved Options

SURFACE MOUNTED. Project. Type. Notes. culus Listed Type I.C.

IC 4 5 YEAR RECESSED MOUNT. Project. Type. Notes 1 9/16 PERFORMANCE PER LINEAR FOOT AT 4000K CONTROL SENSORS

RECESSED T-Bar & Drywall. Project. Type. Notes 23 15/16" 23 7/8" SIDE VIEW. culus Listed Type I.C.

Applies to both UP & DOWN. Outputs between listed min and max are available. Consult factory for other lumen packages

3 1/32. (6) Must select from these options when ordering kits. See page 4 for more details.

Outputs between listed min and max are available. Consult factory for outputs outside of the listed range.

2 1/2. Applies to both UP & DOWN. Specify quantity. Requires 8" blank See integrated controls guide for more details.

Cubic SurroundLite TM

PENDANT INDIRECT - WITH ACCENT OPTION 3 1/32. dia

8' (96") 8' (96") ALL ORDERS MUST BE SUBMITTED WITH DRAWINGS INDICATING DIMENSIONS, ANGLES AND DIAMETER

Project. Type. Notes. (1) D dimming (0-10V) 5% standard

Notes: (1) not recommended with staggered lamping (2) Not available with T8 lamping.

Cubic SurroundLite TM

twig SurroundLite TM WALL SEMI-INDIRECT Project Type Notes Ordering Guide PERFORMANCE PER LINEAR FOOT AT 3500K 1 / 7 axislighting.

WALL LO-OUTPUT. Project. Type. Notes

Outputs between listed min and max are available. Consult factory for outputs outside of the listed range. Applies to both UP & DOWN.

Notes: Indirect. 5 1/2" 140mm. 5 1/32 128mm

SURFACE - LINEAR - FLUSH

SURFACE MOUNT. Project: Notes: Type: PROJECT INFORMATION DIMENSIONS END VIEW ORDERING CODE PRODUCT SPECIFICATIONS

RECESSED ASYMMETRIC MOUNT

Notes: 3 1/2" 89mm. 1/2" 13mm

Notes: 3 13/32. (5) Please consult factory (6) Available with T8 lamp only

PRODUCT ID OPTICS LENGTH/FT LAMP LAMP CONFIGURATION FINISH VOLTAGE ARW

SLIM PENDANT DIRECT. Project. Type. Notes. Ordering Guide PERFORMANCE PER LINEAR FOOT AT 3500K 1 / 8. axislighting.com. Shown with VL optic

Project. Type. Notes 8' (96") 8' (96") ALL ORDERS MUST BE SUBMITTED WITH DRAWINGS INDICATING DIMENSIONS, ANGLES AND DIAMETER

Notes: 2 13/16" 71mm. +GTD(#) generator transfer device (3)

Notes: 4 1/4" 108mm. 4 1/4" 108mm

PENDANT - LINEAR WITH COMBINED DISTRIBUTIONS

Notes: 2 3/8" 60mm. (1) One lamp with satin lens only (2) Not available for T8 Add 9 per lamp. Specify quantity Requires 120V or 277V

PENDANT DIRECT-INDIRECT. SO or MSO PRODUCT ID LIGHT ENGINE NOMINAL LUMENS/FT (#/#) CRI COLOR TEMPERATURE SHIELDING

PENDANT FORMS - DIRECT

LINEAR DOWNLIGHT - PENDANT DIRECT

Notes: Please specify

RECESSED MOUNT With Adjustable Downlight Only. Project Type Notes

RECESSED T-Bar & Drywall

WALL MOUNT. Notes: Project: Type: PROJECT INFORMATION DIMENSIONS SECTION VIEWS ORDERING CODE PRODUCT SPECIFICATIONS

RECESSED WALL WASH MOUNT

PENDANT FORMS - INDIRECT

light FULL BLEED APPLICATION SHOT RENDERING

DESCRIPTION PROJECT: Via 2 features our Asymmetrical Lens Optic for smooth, comfortable

STUD TM 3 Linear LED luminaire- T-bar Mount

LUMINAIRE ID SIZE CENTER OPTICS SIDE OPTICS LIGHT SOURCE CRI LUMEN PACKAGES COLOR TEMP. LED - high performance LED

LUMINAIRE ID DIRECT OPTICS INDIRECT OPTICS LIGHT SOURCE CRI DIRECT LUMEN PACKAGES. LED - high performance LED

DESCRIPTION PROJECT: Vega is an efficient architectural LED troffer with a distinctive luminous shielding that features a median textured

CAVA CURVE LED PENDANT DIRECT/INDIRECT W W W. L U M E N W E R X. C O M

CLARA CLA SUSPENDED, WALL, SURFACE

VIA 2 LED PENDANT DIRECT/INDIRECT W W W. L U M E N W E R X. C O M

NOVENTA NV3.5 SUSPENDED, WALL, SURFACE, RECESSED. STANDARD SIZES 3.5" Aperture corner profile Configurable in individual straight run sections

FULL BLEED APPLICATION SHOT RENDERING

VIA 4 LED RECESSED W W W. L U M E N W E R X. C O M

LiFT LF12 1x2 Architectural Recessed

Verve IV. fixture information. Suspended linear direct/indirect LED with frosted lens or Radial Baffle options.

FINA F48 48 Direct and Uplight Architectural Round

CONVERJ CJ22 2x2 Architectural Recessed

CONVERJ CJ14 1x4 Architectural Recessed

WALL MOUNT. Project: Notes: Type: PROJECT INFORMATION DIMENSIONS END VIEW ORDERING CODE PRODUCT SPECIFICATIONS

Dart. fixture information. Miniature suspended direct/indirect LED luminaire.

EDGE EX3B-WW 3 Suspended Bidirectional Linear Wall Wash

Project Name. 24 (609.6mm)

avenue led features dimensional data performance Narrow 3" slot LED with frosted satin lens.

Transcription:

Project Type Notes 2'x6' ceiling kit shown 4'x4' ceiling kit shown Linear version shown Flush 1 3/4 1 1/2 3 Ordering Guide SCS.5 1 3/4 1 1/2 3 1/2 PRODUCT ID NOM. LUMENS/FT CRI COLOR TEMP. SHIELDING SCS Surface 3 3 lm/ft 8 8 CRI 27 27 K F flush 4 4 lm/ft 9 9 CRI 3 3 K.5M.5", lum. end cap 5 5 lm/ft 35 35 K.5P.5", opaque end cap 4 4 K 2M 2", lum. end cap 2P 2", opaque end cap +BL(#) Blank (for flush option only) Please consult factory for other lumen packages 2 1 3/4 3 2 PERFORMANCE PER LINEAR FOOT AT 35K NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY 3 lm/ft 3.25 W/ft* 93 lm/w 4 lm/ft 4.4 W/ft* 91 lm/w 5 lm/ft 5.55 W/ft* 9 lm/w 3 lm/ft 3.17 W/ft** 94 lm/w 4 lm/ft 4.34 W/ft** 92 lm/w 5 lm/ft 5.42 W/ft** 92 lm/w * Based on a 4 foot flush luminaire using one driver ** Based on a 2x2 foot flush luminaire using one driver LINEAR KIT GEOMETRIC LIGHTING CONTROL SENSORS All lens options use spotless lens 5 LED BOARD & DRIVER YEAR LUMINAIRE WARRANTY LINEAR LENGTH or CEILING KIT (select one) FINISH VOLTAGE DRIVER CIRCUITS 2 2 L L shape 2' (1) AP aluminum paint 12 12 V DP dimming (-1V) 1% 1 1 circuit 3 3 U U shape 2' (1) W white 277 277 V D dimming (-1V) 5% 347V standard (3) 2 2 circuits 4 4 2x2 2'x2' (1) BLK black 347 347 V (2) LT lutron (4) +E(#) emergency section (6) 6 6' 2x4 2'x4' (1) C custom UNV universal BI bi-level dimming +NL(#) night light section (6) 8 8 2x6 2'x6' (1) O other (5) +GTD(#) generator transfer device (6) 12 12 2x8 2'x8' (1) S# System Run 2x1 2'x1' (1) 2x12 2'x12' (1) 4x4 4'x4' (1) K(#) Other kits (1) (1) Available as kit; See page 2 for more details; SCULPT accommodates any length. Metric lengths also available, please consult factory. (2) D dimming (-1V) 5% standard (3) For 347V only (4) Specify system (5) Please consult factory; see page 2 (6) Specify quantity MOUNTING / SUSPENSION BATTERY (OPTIONAL) OTHER (OPTIONAL) IC CONTROLS (OPTIONAL) CUSTOM (OPTIONAL) SB9 surface TB/TG 9/16 B# battery pack 4 sections F fuse (7) DS# daylight sensor (8) C custom SB15 surface TB/TG 15/16 FW(#) flex whip (6' std) OS# occupancy sensor (8) SBS surface screw slot t-bar DOS# daylight & occupancy sensor (8) S surface drywall ceiling EN# Enlighted integral (8) SC surface solid ceiling ENR# Enlighted remote (9) Requires 12V or 277V Please consult factory (7) Requires 12V or 277V (8) For flush option only; Please consult factory (9) Please consult factory Specify quantity. Requires 7" blank See pages 4-5 for more details Please specify 1 / 9

Geometric Lighting An Exclusive Palette of Geometric Lighting Ceiling Kits RECESSED PENDANT SURFACE 2' 2' 2'x2' 2'x4' 2'x6' 2'x8' The Ceiling is Your Canvas. Developed by Axis, Geometric Lighting lets you choose from a palette of light forms to create an infinite number of lighting configurations, regardless of ceiling or mounting type. Sculpt is the first luminaire family engineered by Axis to provide Geometric Lighting, in addition to standard linear lighting. Geometric Lighting Benefits Freedom from traditional illuminated ceiling footprints. Drag and drop design enabling never-before-seen patterns. Traces of light resulting in a smaller footprint (negative space). A cleaner ceiling appearance through patent-pending technology. No performance trade-offs. 2'x1' 2'x12' 4'x4' Ceiling Kit Features UL-listed Easy to specify No complex shop drawings required Metric versions also available Illuminated corners and hairline joints Integrated driver Compatible with option Choice of.5 or 2 heights Integrated MiniFlange (patent pending) enables use of a single T-bar in recessed applications. T-Aligner (Patent Number: 9416535 B1) offers a foolproof solution for aligning cut T-bars. Improved lighting control possibilities, including low-energy and layered illumination, through the use of sensors and multiple drivers to put light where you need it, when you need it. 2 / 9

LED SYSTEM CRI Minimum 8 or 9 color rendering index CCT Choice of 3K, 35K and 4K color temperature with a great color consistency (within 3. step MacAdam ellipse). LED life Minimum 5,h with 85% of lumen maintenance in 25 C ambient temperature, in compliance with IES LM-8 testing measurements. Thermal Management CONSTRUCTION Housing End Cap Interior Brackets Lenses Hanger Suspension Cable Grips ELECTRICAL Aluminum housing acting as the heat sink to maximize life. Extruded aluminum (.8'' nominal) up to Die cast aluminum Die formed sheet steel (2 gauge) Extruded acrylic (.6'' nominal) - injection moulded Die cast aluminum Sliding aircraft cable along product length Quick connecting / release Lutron driver L3D - Hi-Lume A-Series EcoSystem 3-Wire Control (1%) LDE1 - EcoSystem H-Series (1%) LDE5 - EcoSystem 5-Series (5%) LTE - Hi-Lume A-series 2Wires Forward Phase (1%) Other drivers DALI - Digital Addressable Lighting Interface DMX - Digital Multiplex LV - line voltage - Advance Mark 1 Xitanium SR - For wireless sensor Emergency Integral emergency battery pack or emergency circuit optional. Input Voltage 12V, 277V, 347V, UNV. Incorporating these components may have limitations or affect the length of the luminaire. Please contact factory for more details. WARRANTY Axis lighting will warrant defective LEDs, boards, and drivers for 5 years from date of purchase. Warranty is valid if luminaire is installed and used according to specifications. If defective, Axis will send replacement boards or drivers at no cost along with detailed replacement instructions and instructions on how to return defective components to Axis. SHIELDING - Frosted acrylic Spotless lens FINISH Aluminum paint, powder coated and custom finishes are also available. WEIGHT Surface 4 ft Surface 8 ft Surface 12 ft SYSTEM (S#) 8 lbs / 3.6 kg 16 lbs / 7.3 kg 24 lbs / 1.9 kg JOINERS In order to allow very long runs of SCULPT luminaires, Axis has developed an effective joining system. Special care has been taken to maximize the performance of the joiner for each SCULPT option. NOTE: Mount each system segment individually. Do not assemble system prior to mounting. Allow a minimum of 6" between end of long runs and vertical wall APPROVALS Certified to UL and CUL standards Suitable for damp locations. SCULPT linear systems, with the use of a strong profile, allow for a nearly hair thin connection system of continuous runs. Lengths of 4', 8', 12' as well as custom lengths are available. Runs of SCULPT that are greater than 12' in length are designated as systems (S#). This means that the run is comprised of a combination of 4', 8' and/or 12' sections to be assembled on site using our joining system. For more information on systems and joining. CORNERS Lit Corners - In addition Axis offers.5" and 2" corners FL flush.5m.5", lum. end cap 2M 2", lum. end cap For custom corner, please consult factory. Specifications sheets for all corners are available at: www. Shown with 2" OTHER MOUNTING OPTIONS SCULPT LED is also available with pendant, surface and recessed vertical mounted options..5p.5", opaque end cap 2P 2", opaque end cap Specification sheets and installation sheets for all mounting for SCULPT luminaires are available for download at www. 3 / 9

INTEGRATED CONTROLS SCULPT luminaires allow the use of integrated controls such as daylight sensors (DS), occupancy sensors (OS) and combination daylight/occupancy sensors (DOS). These options can be seamlessly integrated into our luminaires. The control system could be used to optimize the lighting of the space by reducing energy consumption through daylight harvesting and occupancy, thereby improving the overall interior environment and allowing for LEED credits. Consult factory for other options. CONTROL SENSORS The integrated control systems offered are: DAYLIGHT HARVESTING (DS): OCCUPANCY (OS): With Daylight sensors, maximum lamp output is reduced according to the available amount of natural light. By reducing maximum lamp output, energy consumption is reduced by up to 2 percent in a process known as Daylight Harvesting. Shown with Luxsense EC-DIR-WH, FD-31 Luxsense, Micro Luxsense When a room is vacated, occupancy sensors ensure the light will be turned off after a programmed delay as well as ensuring that light remains on while the room is occupied. Shown with FS-25 FS-25, FS-155 - Line Voltage FS-55, FS-55C DAYLIGHT HARVESTING AND OCCUPANCY (DOS): ENLIGHTED INTEGRAL (EN)/ ENLIGHTED REMOTE (ENR): ACTILUME, a combination of Daylight & Occupancy sensor from Philips, along with a -1V or DALI driver can be used in one form factor. Shown with Actilume DALI Actilume 1-1V Actilume DALI A combination of Daylight, Occupancy & Temperature autonomously control illumination levels, monitor occupancy and environmental conditions. Data is transmitted wirelessly to the Enlighted networked management system. INSTALLATION EXAMPLE Sensor location option controls option Use in flush lens. For use remote sensors only. * Incorporating IC controls may affect the length of the luminaire, please contact factory for more details. 4 / 9

INTEGRATED CONTROL OPTIONS SENSORS BRAND Model TYPE Daylight Sensor (DS) Occupancy Sensor (OS) Daylight & Occupancy Sensors (DOS) Enlighted sensor (EN, ENR) Lutron EC-DIR-WH Daylight, IR Wattstopper FD-31 Daylight Philips Luxsense LRL12/ Daylight Philips Micro Luxsense Daylight Wattstopper FS-25v2 PIR Occupancy & Ambient light level Wattstopper FS-155 PIR Occupancy & Ambient light level Wattstopper FS-55 Ultrasonic Occupancy (Staircase) Wattstopper FS-55C Ultrasonic Occupancy (Open Area) Philips Actilume, LR11655 Daylight & PIR Occupancy Enlighted integral / remote SU-3E- Daylight, Occupancy & Temperature 5 / 9

PHOTOMETRIC DATA 5 lm/ft linear with Flush lens 237 473 71 946 Angle 22.5 45 67.5 9 943 943 943 943 943 5 932 938 934 938 94 15 884 887 872 86 859 25 788 78 75 723 715 35 656 641 599 559 544 45 58 491 446 48 392 55 361 346 31 279 266 65 227 216 193 174 167 75 11 15 96 88 86 85 21 21 23 24 23 9 1 3 4 4-1 89 1-2 245 2-3 345 3-4 375 4-5 346 5-6 28 6-7 194 7-8 13 8-9 27 9 1 Angle 45 9 45 14871 1345 11453 55 1326 11161 9585 65 1188 9429 8163 75 8767 7698 6843 85 4868 554 554 Lumen/ft down: 51 lm/ft Total : 24 lm (for 4ft) Input Watts: 22.2 W Efficacy: 9 lm/w 8 CRI shown. For 9 CRI, divide wattage by.8 and multiply efficacy by.8. IES FILE:SCS-5-8-35-F-4-W-UNV-D-1.IES TESTED ACCORDING TO IES LM-79-28 5 lm/ft linear with.5" 12 18 12 2 4 6 8 Lumen/ft down: 5 lm/ft Total : 2 lm (for 4ft) Input Watts: 19.9 W Efficacy: 11 lm/w Angle 22.5 45 67.5 9 798 798 798 798 798 5 789 793 791 795 798 15 749 756 747 737 736 25 665 665 646 627 621 35 55 552 524 52 49 45 424 425 45 386 379 55 296 37 3 289 283 65 184 22 28 25 199 75 89 113 13 131 127 85 19 45 66 73 71 9 4 26 48 55 54 95 2 23 41 46 46 15 1 18 34 39 39 115 11 27 33 34 125 7 19 27 28 135 4 14 19 21 145 1 8 13 15 155 3 6 8 165 1 2 175 18-1 75 1-2 29 2-3 297 3-4 328 4-5 313 5-6 266 6-7 21 7-8 128 8-9 66 9-1 37 1-11 29 11-12 22 12-13 15 13-14 9 14-15 5 15-16 2 16-17 18 Angle 45 9 45 12278 968 8467 55 1519 8188 787 65 8816 6881 5879 75 6869 5638 4734 85 4143 4421 3748 8 CRI shown. For 9 CRI, divide wattage by.8 and multiply efficacy by.8. IES FILE:SCS-5-8-35-.5M-4-W-UNV-D-1.IES TESTED ACCORDING TO IES LM-79-28 All IES files are available for download at: www. 6 / 9

PHOTOMETRIC DATA 5 lm/ft linear with 2" 12 18 139 279 418 557 12 Lumen/ft down: 5 lm/ft Total : 22 lm (for 4ft) Input Watts: 19.6 W Efficacy: 12 lm/w Angle 22.5 45 67.5 9 534 534 534 534 534 5 526 536 542 55 553 15 496 522 535 542 547 25 437 474 492 51 57 35 358 45 433 451 459 45 273 33 373 4 49 55 194 257 311 34 346 65 125 19 246 271 27 75 66 129 183 198 193 85 22 81 127 134 129 9 1 62 15 11 14 95 8 54 91 95 89 15 6 43 71 74 69 115 3 31 57 62 59 125 2 24 44 52 51 135 1 17 34 4 42 145 1 11 23 31 33 155 6 13 21 23 165 2 6 9 12 175 1 1 1 18-1 52 1-2 149 2-3 223 3-4 266 4-5 279 5-6 264 6-7 224 7-8 17 8-9 115 9-1 79 1-11 6 11-12 45 12-13 33 13-14 22 14-15 13 15-16 6 16-17 2 18 Angle 45 9 45 7661 5574 5181 55 66 4744 4347 65 5593 3954 3472 75 4518 326 2617 85 3529 2531 1914 8 CRI shown. For 9 CRI, divide wattage by.8 and multiply efficacy by.8. IES FILE:SCS-5-8-35-2M-4-W-UNV-D-1.IES TESTED ACCORDING TO IES LM-79-28 All IES files are available for download at: www. 7 / 9

PHOTOMETRIC DATA 5 lm/ft kit with Flush lens 2'x2' 466 933 1399 Angle 22.5 45 67.5 9 1865 1865 1865 1865 1865 5 1844 1844 1846 1844 1847 15 172 172 1723 1724 1724 25 1483 1485 1486 1491 1491 35 1187 1187 1187 1193 1194 45 891 888 887 894 899 55 625 62 619 626 631 65 396 393 391 396 399 75 21 199 199 21 22 85 52 54 55 54 51 9 4 4 4 4 3-1 175 1-2 484 2-3 683 3-4 743 4-5 688 5-6 559 6-7 391 7-8 213 8-9 62 9 1 Angle 45 9 45 13832 13762 13948 55 11951 11836 1265 65 1268 1152 1346 75 851 8447 8574 85 661 6978 6412 1865 Lumen/ft down: 5 lm/ft Total : 3999 lm (for 8ft) Input Watts: 43.4 W Efficacy: 92 lm/w 8 CRI shown. For 9 CRI, divide wattage by.8 and multiply efficacy by.8. IES FILE:SCS-4-8-35-F-4-W-UNV-D-1.IES 5 lm/ft kit with.5" 12 18 2'x2' 373 746 1119 1492 12 Lumen/ft down: 5 lm/ft Total : 4 lm (for 8ft) Input Watts: 42.2 W Efficacy: 95 lm/w Angle 22.5 45 67.5 9 1492 1492 1492 1492 1492 5 1478 1478 1478 1478 1481 15 1392 1393 1398 1396 1394 25 1218 1223 1229 1226 1219 35 12 11 114 112 11 45 794 84 87 81 787 55 63 616 622 69 59 65 433 45 457 441 415 75 281 32 313 295 263 85 152 166 177 165 141 9 57 67 72 64 5 95 48 57 62 54 42 15 4 46 51 44 35 115 32 37 41 36 3 125 26 26 31 24 24 135 17 15 17 16 17 145 1 8 4 8 1 155 2 1 1 2 165 175 18-1 14 1-2 392 2-3 563 3-4 632 4-5 618 5-6 547 6-7 44 7-8 313 8-9 169 9-1 6 1-11 47 11-12 36 12-13 24 13-14 13 14-15 5 15-16 1 16-17 18 Angle 45 9 45 11843 11847 11739 55 1913 1995 1677 65 1339 1572 9923 75 136 1922 9687 85 1347 1346 12148 8 CRI shown. For 9 CRI, divide wattage by.8 and multiply efficacy by.8. IES FILE:SCS-4-8-35-.5M-4-W-UNV-D-1.IES All IES files are available for download at: www. 8 / 9

PHOTOMETRIC DATA 5 lm/ft kit with 2" 2'x2' 12 18 274 548 822 197 12 Lumen/ft down: 5 lm/ft Total : 4 lm (for 8ft) Input Watts: 39.8 W Efficacy: 1 lm/w Angle 22.5 45 67.5 9 193 193 193 193 193 5 193 193 195 195 196 15 163 173 181 174 162 25 974 993 11 989 965 35 857 881 888 871 839 45 734 766 771 751 78 55 66 644 655 629 577 65 473 514 533 52 446 75 341 378 399 369 319 85 172 197 215 193 157 9 98 12 133 116 88 95 84 13 117 12 76 15 66 81 93 8 6 115 52 65 75 63 48 125 43 49 57 48 39 135 29 31 37 34 3 145 2 2 23 21 21 155 11 1 11 11 12 165 3 2 1 2 3 175 18-1 14 1-2 32 2-3 455 3-4 546 4-5 581 5-6 564 6-7 497 7-8 388 8-9 214 9-1 11 1-11 84 11-12 63 12-13 44 13-14 26 14-15 14 15-16 5 16-17 1 18 Angle 45 9 45 9718 9632 9382 55 931 936 887 65 8982 912 8454 75 882 887 8252 85 738 7182 6682 8 CRI shown. For 9 CRI, divide wattage by.8 and multiply efficacy by.8. IES FILE:SCS-4-8-35-2M-4-W-UNV-D-1.IES All IES files are available for download at: www. 9 / 9