Flush mounting enclosures
Presentation Flush mounting enclosures The appearance of this enclosure, its mechanical strength and its level of electrical safety make it a product fully suitable for residential and small service sector needs. PB104583-40 A rigid base structure b The base offers great rigidity for easier integration. Cable entry plates b Two removable cable entry plates with cuttable flaps allow routing of cables of various diameters and various types of electrical ducting. b During assembly, it can be placed in standby position to allow installation of cables and tubes (see photo opposite). PB104611 A terminal block This neutral/earth terminal block allows optimized cable connection. b It is attached to the base by snap-on mounting. b The screwless terminals ensure reliable, permanent connection and a major time saving. They are designed for rigid conductors or flexible conductors with end-piece, from 1.5 to 4 mm 2. b Easy disconnection with a screwdriver. b Conductors of cross section up to 16 mm 2 can be installed in complete safety thanks to the specific screw terminals. An adjustable, reversible metal frame b The frame can be adjusted vertically by up to 15 mm to compensate for differences of plaster thickness. An adjustable, reversible metal door b The flush door, of modern design, is adjustable and easy to dismount, and the hinge can be fitted on the right or the left side. 93032E.indd version: 3.0 133
Functions and technical data PB104607-80 Function is a distribution enclosure for flush mounting. This indoor plastic enclosure with 1 to 4 rows, with a metal door, is designed for the execution of sub-distribution switchboards for residential units and small service sector buildings. b Stability and ease of installation. b The top and bottom walls have been designed to allow easy installation of cables. b Generous wiring spaces at the top and bottom of the enclosure for connection of modular devices. b Scalable capacity of 12 to 13 or 14 modules per row. Description For improved accessibility and possible preparation in workshop, each part of the enclosure can be dismounted separately: door frame, front plate and chassis. The base is delivered with an anti-cement protection cardboard box to prevent the cement at the enclosure back from hindering wiring. The cardboard box is provided with openings for the fingers allowing it to be removed easily. The enclosure offers large space for wiring: Connection space (mm) Number of rows 1 2 3 4 Top 130 130 155 155 Bottom 105 105 105 105 On the sides 20 20 20 20 PB104594-90 Technical data b Materials: v self-extinguishing plastic for the back and the front plate: resistance to fire and abnormal heat: 650 C as per IEC 60695-2-1 v electroplated sheet steel for the door frame and door, lead-free and cadmium-free paint. b Enclosure colour: RAL 9016 white. b In conformity with standards: IEC 60439-3 and DIN 43871. b Rated current In: up to 63 A. b Rated insulation voltage Ui: < 690 V. b Insulation: class 2. b Service temperature: -20 C to +40 C. b Degree of protection: IP30, IK07. b Number of door operations: 5,000 operations. Composition Terminal blocks Number of rows Number of pins Hole diameter 1 17 + 17 2 x (3 x 16 v + 14 x 4 v ) 2 17 + 17 2 x (3 x 16 v + 14 x 4 v ) 3 27 + 27 6 x 16 v + 21 x 4 v 4 27 + 27 6 x 16 v + 21 x 4 v Catalogue numbers Enclosure with door Number of rows Capacity Dimensions Flush mount Outer H1 L P H2 L P in 9 mm in 18 mm modules modules 1 24 12 + 2 spare 310 330 90 349 344 13.4 10935 PRAUP112 2 48 24 + 4 spare 435 330 90 474 344 13.4 10936 PRAUP212 3 72 36 + 6 spare 585 330 90 624 344 13.4 10937 PRAUP312 4 96 48 + 8 spare 710 330 90 749 344 13.4 10938 PRAUP412 134 version: 3.0 93032E.indd
Accessories Enclosures accessories Connection accessories Type Description 34-pin terminal block 2 x (3 x 16 v + 14 x 4 v ) This terminal block is attached to the back of the base. 10950 PRAUPTB36 4-pin neutral terminal bloc (3 x 10 v + 1 x 16 v ) This terminal block, suitable for the use of residual current circuit breakers, is attached to the back of the base. 10955 PRAUPTB4 Installation accessories Gypsum plasterboard mounting kit These lugs are used to fasten the enclosure in a gypsum plasterboard. 10960 PRAUPGB Mounting lugs Allow the enclosure to be fastened directly to the masonry without using cement. 10965 PRAUPMLUG Finishing accessories Strip of splittable blanking plates These blanking plates are clipped on the front of the front plate without dismounting. They conceal the slots of unused modules. 10945 PRAUPBLP PB104584-15 PB104612-20 PB104596-30 PB104590-30 PB104587-18 PB104585-30 Lock + key This is mounted at the level of the door handle to restrict access to the equipment, without any dismounting or screwing. 10940 PRAUPKEY 93032E.indd version: 3.0 135
Dimensions Dimensions Number of rows H1 H2 1 310 349 10935 PRAUP112 2 435 474 10936 PRAUP212 3 585 624 10937 PRAUP312 4 710 749 10938 PRAUP412 DB122580 DB123148 136 version: 3.0 93032E.indd