Data Sheet July For RoHS information, please visit

Similar documents
Cable Ties. Data Sheet

3M Cable Ties Product Guide. Made in USA. & Plenum Rated

3M Cross-Connect Cabinets 4220SVC and 4220SVE Tall Skirt Installation Guide

3M Locator Plate

3M Mechanical Shearbolt Connectors, QCI Series

3M Locator Plate

3M Ladder Kit 3M710/MS 2 -TMK-LK

3M Pleated Foil I/O Cable Assemblies MDR Series

3M Cold Shrink 1/C Transition Splice Kit QS-III, 5510A-1T-PILC Series

3M Closure System 2-Type Cover (505)

3M Cold Shrink 3-Conductor Inline Splice Kits QS-III 5786A- MT, 5787A-MT and 5788A-MT 25/28 kv for use with Armored and Non- Armored 3/C Cable

3M Mini D Ribbon (MDR) Cable Assembly.050 High Speed Video Data Transmission System, 50 Position 14X50-SZWB-XXX-0NC

3M Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8-TS (RW)

3M Cold Shrink Silicone Rubber Outdoor Termination Kit QT-III 7600-S-3W Series

3M Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8-TOW/WOT (RW)

3M Cold Shrink Silicone Rubber Termination QT-III 7600-S-3G Series Three-Core Outdoor Termination

GM Specification Annual Test Data

3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8-Tape/LC

Cold Shrink Silicone Rubber Termination QT-III 7672-S-8-JCN

3M Cold Shrink QT-III Silicone Rubber Termination Kits 7640-T and 7650-T Series 5, 8, 15, 25/28 and 35 kv

3M Cold Shrink QT-III Silicone Rubber 3/C Cabinet Mount Termination Kit

3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8-TOW/WOT

GM Specification Annual Test Data

3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8(S)-JCN

3 Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8 Series

3M Three-Wall and Four-Wall Headers. Series 3XXX

3M Cold Shrink QS-III Inline Splice Kits 15 kv 5513A, 5514A, 5515A and 5516A

Branch Splice QS-2001B

3M Cold Shrink QT-III Silicone Rubber Termination

Motor Lead Pigtail or V-Stub Splice 5380 Series For 5/8 kv Non-Shielded and Shielded Feeder Cables (Tape, Wire or UniShield Cables)

3M Textool Test and Burn-In Sockets for 1.0 mm Area Array Packages Including Ball Grid Array and Land Grid Array

SLiC Aerial Closures

3M Cold Shrink QT-III Silicone Rubber Three-Core Termination Kits

710 Splicing Rig. Instructions. January E

SLiC Aerial Terminal and Spiral End Seal for use with AMP* Quiet Front Terminal Blocks

3M No Polish LC Connector SM and MM, Flat Splice, 250/900 µm

Door Edge Protection Film 36 inch

3M No Polish Connector 8800-APC/AS SM SC/APC, Angle Splice, 250/900 µm Instructions

3M Cold Shrink Splice Kit QS-III 5536A

3M Electrical Markets Division. Rubber, Mastic and Specialty Tapes Application Guide. Choose the. Right Tape. for your. Electrical Project

3M No Polish Connector 8800-APC/AS SM SC/APC, Angle Splice, 250/900-µm. Instructions. October C

3M Connector System 0.050" x 0.100" Pitch. 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810

3M Cold Shrink QT-III Silicone Rubber Skirted Termination Kits

3M CP2 Press-Fit Headers and Sockets, 2 mm

Volition. VF-45 Quick Install kit. and Maintenance Cleaning Kit. 3Innovation

3M No Polish LC/APC Connector SM, Angle Splice, 250/900 µm 8830-APC/AS

3M Electrical Tapes Product Selection Guide. Insulate & Protect. with Quality Tapes. Preliminary

3M Fiber Dome Closure FDC 10

Cold Shrink Silicone Rubber Termination QT-III (With High-K Stress Relief)

3M Cold Shrink QT-III Silicone Rubber Indoor Termination Kits With High-K Stress Relief

3M Cold Shrink QT-lll Silicone Rubber Skirted Termination Kit 7692-S-4, 7693-S-4, 7694-S-4, 7695-S-4, 7696-S-4

3M Products for Electrical Networks Wind Farm Capabilities. Leading Edge. Electrical Solutions for. Wind Farms

3M Cold Shrink QT-III Silicone Rubber Indoor Tubular Termination Kit

3M Cold Shrink QT-III Silicone Rubber Skirted Termination Kit

Model 1100B CHG Terminator. Installation Instructions

Cold Shrink - Silicone Rubber QTII(X)4S-32H Series Cable Termination Instructions

Volition. Fiber Optic Cable. 3Innovation

3M TM Cubitron TM II Bonded Abrasive Grinding and Cut-Off Wheels. born to. grind. It s grinding reinvented. Featuring. cut & grind wheels

3 740 Wrist strap + shoe tester

VentureClad Insulation Jacketing Tapes 1577 Series

K SERIES PUSH ON & BULLET TERMINALS

3M Cold Shrink QT-II Silicone Rubber Indoor Termination Kits

Dual Lock Reclosable Fasteners Roll Goods with Pressure Sensitive Adhesive

3MTM CubitronTM II Bonded Abrasive Grinding and Cut-Off Wheels. BORN TO GRIND. IT S GRINDING REINVENTED.

3M Cold Shrink QT-III Silicone Rubber Skirted Termination Kit With High-K Stress Relief

3M Collision Repair Solutions. 3M Abrasives and Power Tools. Cutting & Grinding. for Body Techs

3M Cold Shrink QT-lll Silicone Rubber Indoor Tubular Termination Kits With High-K Stress Relief

Technical Data 3M Petroleum Sorbents

QS-III. 5513A, 5514A, 5515A and 5516A 15 kv Cold Shrink Inline Splice Kits. Data Sheet CAUTION. 1. Product Description. 2. Applications.

Electronic Materials Brochure

Repair Method for 3M Resilient Floor Protection System

3M Cold Shrink QT-III Silicone Rubber Skirted Termination Kit

Installing the Boom Mount ET 350 Monitor (Model ET 350R)

3M Automotive Aftermarket. 3M Blue Abrasives. The upgrade you ve been waiting for.

3M Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive

3 Reenterable Encapsulated PST Dome Closure

3M Ionized Air Gun 980/980E. User s Guide

SMC/Fiberglass Repair Adhesive - 90

3M Abrasive Systems Random Orbital Abrasive Disc Portfolio. Sanding & Finishing. Solutions. see inside. Distributed by:

PVI 1800/PVI Residential/Commercial Grid-Tied Photovoltaic Inverter WARRANTY MANUAL. Subject to Change REV , Solectria Renewables

Automotive-Ready Portfolio of 3M Double Sided Tapes. Ready to go further. The future of automotive design begins here.

3 980/980E Ionized Air Gun Instruction Manual

8400 Series Fiber Distribution System

DOCUMENT OBSOLETE. Volition. VF-45 Socket Termination and Maintenance Cleaning Kits COOL HAND TOOLS. CLEAN UP YOUR ACT. VF-45 Socket Termination Kit

3M Housings CH Series

DOCUMENT OBSOLETE. 3M710 UniPresser for 25-Pair Modular Splicing. Instructions. April B

3M Cold Shrink Splice Kits, QS T Series

PVI 60KW, PVI 82KW, PVI 95KW

Finish Line. Redefining The. NEW 3M Elite Series Air-Powered Random Orbital/Orbital Sanders NEW 3M Electric Random Orbital Sanders

protect mask conduct reflect enhance 3M Specialty Tape Solutions

Installation & Operation Manual. Electrak 100 Series / Electromechanical Linear Actuator

Complete Raised Rail Roof Rack System SR1098 SR1099

LBH / LBFR SERIES. Instruction Sheet. Telescoping Lacer Bar

½ DODGE CUMMINS OEM BYPASS LIFT PUMP KIT Installation Instructions Part #

Increasing load transfer in bolted joints

Panel Bonding Adhesive

INSTALL GUIDE Silverado/Sierra L/6.2L

DODGE CUMMINS Arctic-Heat Grid Relocation Kit

Shaping. the future. Introducing. 3M Cubitron II Abrasive Belts NEW! 994F and 997F for high pressure applications

Surface or Pedestal Mount Viking Products While Maintaining Weather and Vandal Resistance

Transcription:

Data Sheet July 2017 3M Cable Ties are molded from 6/6 nylon and are available in a variety of sizes and styles, including weather resistant black for outdoor use. Agency Approvals & Self Certifications Products which are UL Listed as noted in the Typical Data section meet UL Standard 62275 for Cable Management Systems, TYPE 21 or TYPE 21S, and are suitable for use in Air Handling Spaces (plenums) in accordance with Section 300.22 of the National Electric Code. (Exception: 48 inch Heavy Duty not Listed for use in Air Handling Spaces) Products which are identified as UL Listed and manufactured with a black, UV resistant material are Listed as suitable for use outdoors. The Heavy Duty(175 lb.) cable ties are UL Listed 181B-C mechanical fasteners for use with flexible air ducts. UL. File # E116841 For RoHS information, please visit www.3m.com/rohs Applications 3M Cable Ties are used to secure wire bundles and harness components quickly. The flexible design allows the user to slip ties easily under and around cables and harnesses. These ties can be used with most standard tensioning/cutoff tools for fast production line fastening. Specifications Open Specifications All ties must be UL. Listed, TYPE 21 or TYPE 21S, and tested to UL. Standard 62275 for Cable Management Systems. Closed Specifications Product must be 3M cable ties, UL. Listed, TYPE 21 or TYPE 21S, and tested to UL. Standard 62275 for Cable Management Systems. Cable Tie Bases 3M Cable Tie Bases are molded from 6/6 nylon or ABS and available in natural, weather resistant black or ivory material. They are also available in different sizes and mounting abilities. The self-adhesive style is for simple lightweight mounting of wire bundles while the saddle design screw mount is designed for maximum weight and stability. 1 of 5 3

iature Cable Ties (18lb, 80N) UL Listed TYPE 21 Operating CT4BK18-C 4.1 (104).10 (3,0).062 (1,6) /.75 (19,1) 18 (80).04 (1,0) -40ºC - 85ºC 0 C CT4BK18-M 4.1 (104).10 (3,0).062 (1,6) /.75 (19,1) 18 (80).04 (1,0) -40ºC - 85ºC 0 C 1000 100 CT4NT18-C 4.1 (104).10 (3,0).062 (1,6) /.75 (19,1) 18 (80).04 (1,0) -40ºC - 85ºC 0 C 100 Standard CT4NT18-M 4.1 (104).10 (3,0).062 (1,6) /.75 (19,1) 18 (80).04 (1,0) -40ºC - 85ºC 0 C 1000 Standard CT6BK18-C 6.1 (155).10 (3,0).062 (1,6) / 1.25 (31,8) 18 (80).05 (1,3) -40ºC - 85ºC 0 C 100 CT6NT18-C 6.1 (155).10 (3,0).062 (1,6) / 1.25 (31,8) 18 (80).05 (1,3) -40ºC - 85ºC 0 C 100 Standard CT6NT18-M 6.1 (155).10 (3,0).062 (1,6) / 1.25 (31,8) 18 (80).05 (1,3) -40ºC - 85ºC 0 C 1000 Standard CT8BK18-C 8.1 (206).10 (3,0).062 (1,6) / 2.00 (50,8) 18 (80).05 (1,3) -40ºC - 85ºC 0 C 100 CT8BK18-M 8.1 (206).10 (3,0).062 (1,6) / 2.00 (50,8) 18 (80).05 (1,3) -40ºC - 85ºC 0 C 1000 CT8NT18-C 8.1 (206).10 (3,0).062 (1,6) / 2.00 (50,8) 18 (80).05 (1,3) -40ºC - 85ºC 0 C 100 Standard CT8NT18-M 8.1 (206).10 (3,0).062 (1,6) / 2.00 (50,8) 18 (80).05 (1,3) -40ºC - 85ºC 0 C 1000 Standard Intermediate Cable Ties (40lb, 180N) UL Listed TYPE 21 CT6BK40-C 5.8 (147).14 (3,6).062 (1,6) / 1.25 (31,8) 40 (180).05 (1,3) -40ºC - 85ºC -20 C 100 CT6BK40-M 5.8 (147).14 (3,6).062 (1,6) / 1.25 (31,8) 40 (180).05 (1,3) -40ºC - 85ºC -20 C 1000 CT6NT40-C 5.8 (147).14 (3,6).062 (1,6) / 1.25 (31,8) 40 (180).05 (1,3) -40ºC - 85ºC -20 C 100 Standard CT6NT40-M 5.8 (147).14 (3,6).062 (1,6) / 1.25 (31,8) 40 (180).05 (1,3) -40ºC - 85ºC -20 C 1000 Standard CT8BK40-C 8.9 (226).14 (3,6).062 (1,6) / 2.00 (50,8) 40 (180).05 (1,3) -40ºC - 85ºC -20 C 100 CT8BK40-M 8.9 (226).14 (3,6).062 (1,6) / 2.00 (50,8) 40 (180).05 (1,3) -40ºC - 85ºC -20 C 1000 CT8NT40-C 8.9 (226).14 (3,6).062 (1,6) / 2.00 (50,8) 40 (180).05 (1,3) -40ºC - 85ºC -20 C 100 Standard CT8NT40-M 8.9 (226).14 (3,6).062 (1,6) / 2.00 (50,8) 40 (180).05 (1,3) -40ºC - 85ºC -20 C 1000 Standard 2 of 5

Standard Cable Ties (50lb, 220N) UL Listed TYPE 21S CT8BK50-C 7.6 (193).18 (4,6).062 (1,6) / 1.87 (47,5) 50 (220).05 (1,3) -40ºC - 85ºC -20 C 100 CT8BK50-M 7.6 (193).18 (4,6).062 (1,6) / 1.87 (47,5) 50 (220).05 (1,3) -40ºC - 85ºC -20 C 1000 CT8NT50-C 7.6 (193).18 (4,6).062 (1,6) / 1.87 (47,5) 50 (220).05 (1,3) -40ºC - 85ºC -20 C 100 Standard CT8NT50-M 7.6 (193).18 (4,6).062 (1,6) / 1.87 (47,5) 50 (220).05 (1,3) -40ºC - 85ºC -20 C 1000 Standard CT8RD50-C 7.6 (193).18 (4,6).062 (1,6) / 1.87 (47,5) 50 (220).05 (1,3) -40ºC - 85ºC -20 C 100 CT11BK50-C 11.1 (282).18 (4,6).062 (1,6) / 3.00 (76,2) 50 (220).05 (1,3) -40ºC - 85ºC -20 C 100 CT11BK50-D 11.1 (282).18 (4,6).062 (1,6) / 3.00 (76,2) 50 (220).05 (1,3) -40ºC - 85ºC -20 C 500 Standard Red CT11NT50-C 11.1 (282).18 (4,6).062 (1,6) / 3.00 (76,2) 50 (220).05 (1,3) -40ºC - 85ºC -20 C 100 Standard CT11NT50-D 11.1 (282).18 (4,6).062 (1,6) / 3.00 (76,2) 50 (220).05 (1,3) -40ºC - 85ºC -20 C 500 Standard CT11RD50-C 11.1 (282).18 (4,6).062 (1,6) / 3.00 (76,2) 50 (220).05 (1,3) -40ºC - 85ºC -20 C 100 CT15BK50-C 14.6 (371).18 (4,6).062 (1,6) / 4.00 (101,6) 50 (220).05 (1,3) -40ºC - 85ºC -20 C 100 CT15BK50-D 14.6 (371).18 (4,6).062 (1,6) / 4.00 (101,6) 50 (220).05 (1,3) -40ºC - 85ºC -20 C 500 Standard Red CT15NT50-C 14.6 (371).18 (4,6).062 (1,6) / 4.00 (101,6) 50 (220).05 (1,3) -40ºC - 85ºC -20 C 100 Standard CT15NT50-D 14.6 (371).18 (4,6).062 (1,6) / 4.00 (101,6) 50 (220).05 (1,3) -40ºC - 85ºC -20 C 500 Standard Light Heavy Duty Cable Ties (120lb, 530N) UL Listed TYPE 21 Quantit y CT8BK120-L 9.0 (229).30 (7,6).06 (1,6) / 2.00 (50,8) 120 (530).07 (1,8) -40ºC -85ºC -20 C 50 CT8NT120-L 9.0 (229).30 (7,6).06 (1,6) / 2.00 (50,8) 120 (530).07 (1,8) -40ºC -85ºC -20 C 50 Standard CT15BK120-C 15.0 (381).30 (7,6).19 (4,8) / 4.00 (101,6) 120 (530).07 (1,8) -40ºC -85ºC -20 C 100 CT15BK120-D 15.0 (381).30 (7,6).19 (4,8) / 4.00 (101,6) 120 (530).07 (1,8) -40ºC -85ºC -20 C 500 CT15NT120-C 15.0 (381).30 (7,6).19 (4,8) / 4.00 (101,6) 120 (530).07 (1,8) -40ºC -85ºC -20 C 100 Standard CT15NT120-D 15.0 (381).30 (7,6).19 (4,8) / 4.00 (101,6) 120 (530).07 (1,8) -40ºC -85ºC -20 C 500 Standard 3 of 5

Heavy Duty Cable Ties (175lb, 800N) UL Listed TYPE 21 CT24BK175-L 24.0 (610).34 (8,6).19 (4,8) / 7.2 (183) 175 (800).09 (2,3) -40ºC - 85ºC 0 C 50 CT24NT175-L 24.0 (610).34 (8,6).19 (4,8) / 7.2 (183) 175 (800).09 (2,3) -40ºC - 85ºC 0 C 50 Standard CT36BK175-L 36.0 (914).34 (8,6).19 (4,8) / 11.0 (279) 175 (800).09 (2,3) -40ºC - 85ºC 0 C 50 CT36NT175-L 36.0 (914).34 (8,6).19 (4,8) / 11.0 (279) 175 (800).09 (2,3) -40ºC - 85ºC 0 C 50 Standard CT48BK175-L 47.9 (1217).36 (9,1).28 (7) / 14.3 (365) 175 (800).07 (1,8) -40ºC - 85ºC 0 C 50 CT48NT175-L 47.9 (1217).36 (9,1).28 (7) / 14.3 (365) 175 (800).07 (1,8) -40ºC - 85ºC 0 C 50 Standard Screw Mount Ties 50lb UL Listed TYPE 21S 120lb UL Listed TYPE 21 / Max Bundle Dia. Loop Mech. Lb (N) CT8BK50S-C 8.6 (218).18 (4,6).062 (1,6) / 2.00 (50,8) 50 (220).06 (1,5) -40ºC - 85ºC 50 (220) 100 CT8BK50S-M 8.6 (218).18 (4,6).062 (1,6) / 2.00 (50,8) 50 (220).06 (1,5) -40ºC - 85ºC 50 (220) 1000 CT8NT50S-C 8.6 (218).18 (4,6).062 (1,6) / 2.00 (50,8) 50 (220).06 (1,5) -40ºC - 85ºC 50 (220) 100 CT8NT50S-M 8.6 (218).18 (4,6).062 (1,6) / 2.00 (50,8) 50 (220).06 (1,5) -40ºC - 85ºC 50 (220) 1000 CT15BK50S-L 15.1 (384).18 (4,6).062 (1,6) / 4.00 (102,0) 50 (220).06 (1,5) -40ºC - 85ºC 50 (220) 50 CT15BK50S-D 15.1 (384).18 (4,6).062 (1,6) / 4.00 (102,0) 50 (220).06 (1,5) -40ºC - 85ºC 50 (220) 500 CT15NT50S-L 15.1 (384).18 (4,6).062 (1,6) / 4.00 (102,0) 50 (220).06 (1,5) -40ºC - 85ºC 50 (220) 50 CT15NT50S-D 15.1 (384).18 (4,6).062 (1,6) / 4.00 (102,0) 50 (220).06 (1,5) -40ºC - 85ºC 50 (220) 500 CT15NT120S-L 15.7 (399).30 (7,6).19 (4.8) / 4.00 (102,0) 120 (530).07 (1,8) -40ºC - 85ºC 18 (80) 50 CT15NT120S-D 15.7 (399).30 (7,6).19 (4.8) / 4.00 (102,0) 120 (530).07 (1,8) -40ºC - 85ºC 18 (80) 500 4 of 5

Bases Dimensions LxWxH in ( mm) Slot Slot Height Color Mount Type Material CTB75X75NTA-C.74x.74x.22 (19x19x5,6).21 (5,3).06 (1.5) Natural CTB75X75BKA-C.74x.74x.22 (19x19x5,6).21 (5,3).06 (1.5) black CTB1X1NTA-C.99x.99x.22 (25x25x5,8).21 (5,3).06 (1.5) Natural CTB1X1BKA-C.99x.99x.23 (25x25x5,8).21 (5,3).06 (1.5) black CTB2X1BGA-C 2.0x1.0x.35 (51x25x8,9).21 (5,3).18 (4,5) Beige 100 ABS CTB1X1BGA-C 1.0x1.2x.15 (25x25x3,8).21 (5,3).06 (1,5) Beige 100 ABS CTB60X40NTS-C CTB87X62NTS-C.60x.41x.28 (15x10x7,0).87x.62x.38 (22x16x10).21 (5,3).06 (1,5) Natural Screw Mount.35 (8,9).10 (2,5) Natural Screw Mount Availability Please contact your local distributor; available from 3M.com/electrical [Where to Buy] or call 1.800.245.3573. Shelf Life & Storage 3M Cable Ties have a 5-year shelf life from date of manufacture when stored in a humidity controlled storage (10 C/50 F to 27 C/80 F and <75% relative humidity). 3M is a trademark of 3M Company. Important Notice Warranty; Limited Remedy; Limited Liability All statements, technical information, and recommendations related to 3M s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product, which are not contained in 3M s current publications, or any contrary statements contained on your purchase order, shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any direct, indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electrical Markets Division 6801 River Place Blvd. Austin, TX 78726-9000 800.245.3573 FAX: 800.245.0329 www.3m.com/electrical Please recycle 3M 2017 All rights reserved 78-8125-9860-1 Rev L 5 of 5